This document is intended as a specification of the protocol
used for the communication between clients and servers to perform certain
management operations on objects stored and maintained by a key management
system. These objects are referred to as Managed Objects in this specification.
They include symmetric and asymmetric cryptographic keys, digital certificates,
and templates used to simplify the creation of objects and control their use.
Managed Objects are managed with operations that include the ability to
generate cryptographic keys, register objects with the key management system,
obtain objects from the system, destroy objects from the system, and search for
objects maintained by the system. Managed Objects also have associated
attributes, which are named values stored by the key management system and are
obtained from the system via operations. Certain attributes are added,
modified, or deleted by operations.
The protocol specified in this document includes several
certificate-related functions for which there are a number of existing
protocols – namely Validate (e.g., SCVP or XKMS), Certify (e.g., CMP [RFC4210], CMC [RFC5272][RFC6402], SCEP) and Re-certify (e.g., CMP [RFC4210],
CMC [RFC5272][RFC6402], SCEP). The protocol
does not attempt to define a comprehensive certificate management protocol,
such as would be needed for a certification authority. However, it does include
functions that are needed to allow a key server to provide a proxy for
certificate management functions.
In addition to the normative definitions for managed
objects, operations and attributes, this specification also includes normative
definitions for the following aspects of the protocol:
• The expected behavior of the server and client
as a result of operations,
• Message contents and formats,
• Message encoding (including enumerations), and
• Error handling.
This specification is complemented by several other
documents. The KMIP Usage Guide[KMIP-UG] provides
illustrative information on using the protocol. The KMIP Profiles Specification
[KMIP-Prof] provides a selected set of base level
conformance profiles and authentication suites; additional KMIP Profiles define
specific sets of KMIP functionality for conformance purposes. The KMIP Test
Specification [KMIP-TC] provides samples of protocol
messages corresponding to a set of defined test cases.
This specification defines the KMIP protocol version major 1
and minor 2 (see 6.1).
This Working Draft is being developed under the RF on
RAND Terms Mode of the OASIS IPR Policy,
the mode chosen when the Technical Committee was established.
For information on whether any patents have been disclosed
that may be essential to implementing this specification, and any offers of
patent licensing terms, please refer to the Intellectual Property Rights
section of the TC’s web page (https://www.oasis-open.org/committees/kmip/ipr.php).
The key words “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL
NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “MAY”, and “OPTIONAL” in this
document are to be interpreted as described in [RFC2119].
For acronyms used in this document, see Appendix E. For definitions not found in this document, see [SP800-57-1].
|
Archive
|
To place information not accessed frequently into
long-term storage.
|
|
Asymmetric key pair
(key pair)
|
A public key and its corresponding private key; a key pair
is used with a public key algorithm.
|
|
Authentication
|
A process that establishes the origin of information, or
determines an entity’s identity.
|
|
Authentication code
|
A cryptographic checksum based on a security function.
|
|
Authorization
|
Access privileges that are granted to an entity; conveying
an “official” sanction to perform a security function or activity.
|
|
Certificate length
|
The length (in bytes) of an X.509 public key certificate.
|
|
Certification authority
|
The entity in a Public Key Infrastructure (PKI) that is
responsible for issuing certificates, and exacting compliance to a PKI
policy.
|
|
Ciphertext
|
Data in its encrypted form.
|
|
Compromise
|
The unauthorized disclosure, modification, substitution or
use of sensitive data (e.g., keying material and other security-related information).
|
|
Confidentiality
|
The property that sensitive information is not disclosed
to unauthorized entities.
|
|
Cryptographic algorithm
|
A well-defined computational procedure that takes variable
inputs, including a cryptographic key and produces an output.
|
|
Cryptographic key
(key)
|
A parameter used in conjunction with a cryptographic
algorithm that determines its operation in such a way that an entity with
knowledge of the key can reproduce or reverse the operation, while an entity
without knowledge of the key cannot. Examples include:
1. The transformation of plaintext data into ciphertext
data,
2. The transformation of ciphertext data into plaintext
data,
3. The computation of a digital signature from data,
4. The verification of a digital signature,
5. The computation of an authentication code from data,
and
6. The verification of an authentication code from data
and a received authentication code.
|
|
Decryption
|
The process of changing ciphertext into plaintext using a
cryptographic algorithm and key.
|
|
Digest (or hash)
|
The result of applying a hashing algorithm to information.
|
|
Digital signature
(signature)
|
The result of a cryptographic transformation of data that,
when properly implemented with supporting infrastructure and policy, provides
the services of:
1. origin authentication
2. data integrity, and
3. signer non-repudiation.
|
|
Digital Signature Algorithm
|
A cryptographic algorithm used for digital signature.
|
|
Encryption
|
The process of changing plaintext into ciphertext using a
cryptographic algorithm and key.
|
|
Hashing algorithm (or hash algorithm, hash function)
|
An algorithm that maps a bit string of arbitrary length to
a fixed length bit string. Approved hashing algorithms satisfy the following
properties:
1. (One-way) It
is computationally infeasible to find any input that
maps to any
pre-specified output, and
2. (Collision resistant) It is computationally infeasible
to find any two distinct inputs that map to the same output.
|
|
Integrity
|
The property that sensitive data has not been modified or
deleted in an unauthorized and undetected manner.
|
|
Key derivation
(derivation)
|
A function in the lifecycle of keying material; the
process by which one or more keys are derived from:
1) Either a shared secret from a key agreement computation
or a pre-shared cryptographic key, and
2) Other information.
|
|
Key management
|
The activities involving the handling of cryptographic
keys and other related security parameters (e.g., IVs and passwords) during
the entire life cycle of the keys, including their generation, storage,
establishment, entry and output, and destruction.
|
|
Key wrapping
(wrapping)
|
A method of encrypting and/or MACing/signing keys.
|
|
Message Authentication Code (MAC)
|
A cryptographic checksum on data that uses a symmetric key
to detect both accidental and intentional modifications of data.
|
|
PGP Key
|
A RFC 4880-compliant container of cryptographic keys and
associated metadata. Usually text-based (in PGP-parlance, ASCII-armored).
|
|
Private key
|
A cryptographic key used with a public key cryptographic
algorithm that is uniquely associated with an entity and is not made public.
The private key is associated with a public key. Depending on the algorithm,
the private key MAY be used to:
1. Compute the corresponding public key,
2. Compute a digital signature that can be verified by the
corresponding public key,
3. Decrypt data that was encrypted by the corresponding
public key, or
4. Compute a piece of common shared data, together with
other information.
|
|
Profile
|
A specification of objects, attributes, operations,
message elements and authentication methods to be used in specific contexts
of key management server and client interactions (see [KMIP-Prof]).
|
|
Public key
|
A cryptographic key used with a public key cryptographic
algorithm that is uniquely associated with an entity and that MAY be made
public. The public key is associated with a private key. The public key MAY
be known by anyone and, depending on the algorithm, MAY be used to:
1. Verify a digital signature that is signed by the
corresponding private key,
2. Encrypt data that can be decrypted by the corresponding
private key, or
3. Compute a piece of shared data.
|
|
Public key certificate
(certificate)
|
A set of data that uniquely identifies an entity, contains
the entity's public key and possibly other information, and is digitally
signed by a trusted party, thereby binding the public key to the entity.
|
|
Public key cryptographic algorithm
|
A cryptographic algorithm that uses two related keys, a
public key and a private key. The two keys have the property that determining
the private key from the public key is computationally infeasible.
|
|
Public Key Infrastructure
|
A framework that is established to issue, maintain and revoke
public key certificates.
|
|
Recover
|
To retrieve information that was archived to long-term
storage.
|
|
Split Key
|
A process by which a cryptographic key is split into n multiple
key components, individually providing no knowledge of the original key, which
can be subsequently combined to recreate the original cryptographic key. If
knowledge of k (where k is less than or equal to n)
components is necessary to construct the original key, then knowledge of any k-1
key components provides no information about the original key other than,
possibly, its length.
|
|
Symmetric key
|
A single cryptographic key that is used with a secret
(symmetric) key algorithm.
|
|
Symmetric key algorithm
|
A cryptographic algorithm that uses the same secret
(symmetric) key for an operation and its inverse (e.g., encryption and
decryption).
|
|
X.509 certificate
|
The ISO/ITU-T X.509 standard defined two types of
certificates – the X.509 public key certificate, and the X.509 attribute
certificate. Most commonly (including this document), an X.509 certificate
refers to the X.509 public key certificate.
|
|
X.509 public key certificate
|
The public key for a user
(or device) and a name for the user (or device), together with some other
information, rendered un-forgeable by the digital signature of the
certification authority that issued the certificate, encoded in the format
defined in the ISO/ITU-T X.509 standard.
|
Table 1: Terminology
[CHACHA] D. J. Bernstein. ChaCha, a
variant of Salsa20. https://cr.yp.to/chacha/chacha-20080128.pdf
[ECC-Brainpool] ECC Brainpool Standard Curves
and Curve Generation v. 1.0.19.10.2005, http://www.ecc-brainpool.org/download/Domain-parameters.pdf.
[FIPS180-4] Secure Hash Standard (SHS), FIPS PUB 186-4, March 2012,
http://csrc.nist.gov/publications/fips/fips18-4/fips-180-4.pdf.
[FIPS186-4] Digital Signature Standard (DSS), FIPS PUB 186-4, July 2013,
http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.186-4.pdf.
[FIPS197] Advanced Encryption Standard, FIPS PUB 197, November 2001,
http://csrc.nist.gov/publications/fips/fips197/fips-197.pdf.
[FIPS198-1] The Keyed-Hash Message Authentication Code (HMAC), FIPS PUB 198-1, July 2008, http://csrc.nist.gov/publications/fips/fips198-1/FIPS-198-1_final.pdf.
[FIPS202] SHA-3 Standard:
Permutation-Based Hash and Extendable-Output Functions, August 2015. http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.202.pdf
[IEEE1003-1] IEEE Std 1003.1, Standard for
information technology - portable operating system interface (POSIX). Shell and
utilities, 2004.
[ISO16609] ISO, Banking -- Requirements
for message authentication using symmetric techniques, ISO 16609, 2012.
[ISO9797-1] ISO/IEC, Information
technology -- Security techniques -- Message Authentication Codes (MACs) --
Part 1: Mechanisms using a block cipher, ISO/IEC 9797-1, 2011.
[KMIP-Prof] Key Management
Interoperability Protocol Profiles Version 1.4. Edited by Tim Hudson and Robert Lockhart. Latest
version: http://docs.oasis-open.org/kmip/profiles/v1.4/kmip-profiles-v1.4.html.
[PKCS#1] RSA Laboratories, PKCS #1 v2.1: RSA
Cryptography Standard, June 14, 2002, http://www.preserveitall.org/emc-plus/rsa-labs/standards-initiatives/pkcs-rsa-cryptography-standard.htm.
[PKCS#5] RSA Laboratories, PKCS #5 v2.1: Password-Based
Cryptography Standard, October 5, 2006, http://www.preserveitall.org/emc-plus/rsa-labs/standards-initiatives/pkcs-5-password-based-cryptography-standard.htm.
[PKCS#8] RSA
Laboratories, PKCS#8 v1.2: Private-Key Information Syntax Standard,
November 1, 1993, http://www.preserveitall.org/emc-plus/rsa-labs/standards-initiatives/pkcs-8-private-key-information-syntax-stand.htm.
[PKCS#10] RSA
Laboratories, PKCS #10 v1.7: Certification Request Syntax Standard,
May 26, 2000, http://www.preserveitall.org/emc-plus/rsa-labs/standards-initiatives/pkcs10-certification-request-syntax-standard.htm.
[POLY1305] Daniel J. Bernstein. The
Poly1305-AES Message-Authentication Code. In Henri Gilbert and Helena
Handschuh, editors, Fast Software Encryption: 12th International Workshop, FSE
2005, Paris, France, February 21-23, 2005, Revised Selected Papers, volume 3557
of Lecture Notes in Computer Science, pages 32–49. Springer, 2005.
[RFC1319] B. Kaliski, The MD2
Message-Digest Algorithm, IETF RFC 1319, Apr 1992, http://www.ietf.org/rfc/rfc1319.txt.
[RFC1320] R. Rivest, The MD4 Message-Digest Algorithm, IETF RFC 1320,
April 1992, http://www.ietf.org/rfc/rfc1320.txt.
[RFC1321] R. Rivest, The MD5 Message-Digest Algorithm, IETF RFC 1321,
April 1992, http://www.ietf.org/rfc/rfc1321.txt.
[RFC1421] J. Linn, Privacy Enhancement for Internet Electronic Mail:
Part I: Message
Encryption and Authentication Procedures, IETF RFC 1421, February 1993, http://www.ietf.org/rfc/rfc1421.txt.
[RFC1424] B. Kaliski, Privacy
Enhancement for Internet Electronic Mail: Part IV: Key Certification and
Related Services, IETF RFC 1424, Feb 1993, http://www.ietf.org/rfc/rfc1424.txt.
[RFC2104] H. Krawczyk, M. Bellare, R. Canetti, HMAC: Keyed-Hashing for Message
Authentication, IETF RFC 2104, February 1997, http://www.ietf.org/rfc/rfc2104.txt.
[RFC2119] Bradner,
S., “Key words for use in RFCs to Indicate Requirement Levels”, BCP 14, RFC
2119, March 1997. http://www.ietf.org/rfc/rfc2119.txt.
[RFC2898] B. Kaliski, PKCS #5: Password-Based Cryptography Specification
Version 2.0, IETF RFC 2898, September 2000, http://www.ietf.org/rfc/rfc2898.txt.
[RFC2986] M. Nystrom and
B. Kaliski, PKCS #10: Certification Request Syntax Specification Version
1.7, IETF RFC2986, November 2000, http://www.rfc-editor.org/rfc/rfc2986.txt.
[RFC3447] J. Jonsson, B. Kaliski, Public-Key Cryptography Standards (PKCS) #1:
RSA Cryptography Specifications Version 2.1, IETF RFC 3447, Feb 2003,
http://www.ietf.org/rfc/rfc3447.txt.
[RFC3629] F. Yergeau, UTF-8, a transformation format of ISO 10646, IETF
RFC 3629, November 2003, http://www.ietf.org/rfc/rfc3629.txt.
[RFC3686] R. Housley, Using Advanced Encryption
Standard (AES) Counter Mode with IPsec Encapsulating Security Payload (ESP),
IETF RFC 3686, January 2004, http://www.ietf.org/rfc/rfc3686.txt.
[RFC4210] C. Adams, S. Farrell, T. Kause and T.
Mononen, Internet X.509 Public Key Infrastructure Certificate Management
Protocol (CMP), IETF RFC 4210, September 2005, http://www.ietf.org/rfc/rfc4210.txt.
[RFC4211] J. Schaad, Internet X.509 Public Key Infrastructure Certificate
Request Message Format (CRMF), IETF RFC 4211, September 2005, http://www.ietf.org/rfc/rfc4211.txt.
[RFC4880] J. Callas, L. Donnerhacke, H. Finney, D. Shaw, and R. Thayer, OpenPGP
Message Format, IETF RFC 4880, November 2007, http://www.ietf.org/rfc/rfc4880.txt.
[RFC4949] R. Shirey, Internet
Security Glossary, Version 2, IETF RFC 4949, August 2007, http://www.ietf.org/rfc/rfc4949.txt.
[RFC5958] S. Turner,
Asymmetric Key Packages, IETF RFC5958, August 2010, https://tools.ietf.org/rfc/rfc5958.txt
[RFC5272] J. Schaad and M. Meyers, Certificate
Management over CMS (CMC), IETF RFC 5272, June 2008, http://www.ietf.org/rfc/rfc5272.txt.
[RFC5280] D. Cooper, S. Santesson, S. Farrell, S. Boeyen, R. Housley, W. Polk,
Internet X.509 Public Key Infrastructure Certificate, IETF RFC 5280, May
2008, http://www.ietf.org/rfc/rfc5280.txt.
[RFC5639] M. Lochter, J. Merkle, Elliptic Curve Cryptography (ECC) Brainpool
Standard Curves and Curve Generation, IETF RFC 5639, March 2010, http://www.ietf.org/rfc/rfc5639.txt.
[RFC6402] J. Schaad, Certificate
Management over CMS (CMC) Updates, IETF RFC6402, November 2011, http://www.rfc-editor.org/rfc/rfc6402.txt.
[RFC6818] P. Yee, Updates to the Internet
X.509 Public Key Infrastructure Certificate and Certificate Revocation List
(CRL) Profile, IETF RFC6818, January 2013, http://www.rfc-editor.org/rfc/rfc6818.txt.
[SEC2] SEC 2: Recommended Elliptic Curve Domain Parameters,http://www.secg.org/SEC2-Ver-1.0.pdf.
[SP800-38A] M. Dworkin, Recommendation for Block Cipher Modes of Operation –
Methods and Techniques, NIST Special Publication 800-38A, December 2001,
http://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-38a.pdf
[SP800-38B] M. Dworkin, Recommendation for Block Cipher Modes of Operation: The
CMAC Mode for Authentication, NIST Special Publication 800-38B, May 2005,
updated June 2016, http://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-38b.pdf
[SP800-38C] M. Dworkin, Recommendation for Block Cipher Modes of Operation: the
CCM Mode for Authentication and Confidentiality, NIST Special Publication
800-38C, May 2004, updated July 2007 http://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-38c.pdf
[SP800-38D] M. Dworkin, Recommendation for Block Cipher Modes of Operation:
Galois/Counter Mode (GCM) and GMAC, NIST Special Publication 800-38D, Nov
2007, http://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-38d.pdf.
[SP800-38E] M. Dworkin, Recommendation for Block Cipher Modes of Operation: The
XTS-AES Mode for Confidentiality on Block-Oriented Storage Devices, NIST
Special Publication 800-38E, January 2010, http://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-38e.pdf.
[SP800-56A] E. Barker, L. Chen, A. Roginsky and M. Smid, Recommendation for
Pair-Wise Key Establishment Schemes Using Discrete Logarithm Cryptography,
NIST Special Publication 800-56A Revision 2, May 2013, http://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-56Ar2.pdf.
[SP800-57-1] E. Barker, W. Barker, W. Burr, W. Polk, and M. Smid, Recommendations
for Key Management - Part 1: General (Revision 3), NIST Special Publication
800-57 Part 1 Revision 3, July 2012, http://csrc.nist.gov/publications/nistpubs/800-57/sp800-57_part1_rev3_general.pdf.
[SP800-108] L. Chen, Recommendation for Key Derivation Using Pseudorandom
Functions (Revised), NIST Special Publication 800-108, Oct 2009,
http://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-108.pdf.
[X.509] International
Telecommunication Union (ITU)–T, X.509: Information technology – Open systems
interconnection – The Directory: Public-key and attribute certificate
frameworks, November 2008, http://www.itu.int/rec/recommendation.asp?lang=en&parent=T-REC-X.509-200811-1.
[X9.24-1] ANSI, X9.24 - Retail
Financial Services Symmetric Key Management - Part 1: Using Symmetric
Techniques, 2009.
[X9.31] ANSI, X9.31: Digital
Signatures Using Reversible Public Key Cryptography for the Financial Services
Industry (rDSA), September 1998.
[X9.42] ANSI, X9.42: Public Key Cryptography for the
Financial Services Industry: Agreement of Symmetric Keys Using Discrete
Logarithm Cryptography, 2003.
[X9.62] ANSI, X9.62: Public Key Cryptography for the
Financial Services Industry, The Elliptic Curve Digital Signature Algorithm
(ECDSA), 2005.
[X9.63] ANSI, X9.63: Public Key Cryptography for the
Financial Services Industry, Key Agreement and Key Transport Using Elliptic
Curve Cryptography, 2011.
[X9.102] ANSI, X9.102: Symmetric Key
Cryptography for the Financial Services Industry - Wrapping of Keys and
Associated Data, 2008.
[X9 TR-31] ANSI, X9 TR-31: Interoperable Secure Key Exchange Key Block
Specification for Symmetric Algorithms, 2010.
[ISO/IEC 9945-2] The Open Group, Regular
Expressions, The Single UNIX Specification version 2, 1997, ISO/IEC
9945-2:1993, http://www.opengroup.org/onlinepubs/007908799/xbd/re.html.
[KMIP-UG] Key Management Interoperability Protocol
Usage Guide Version 1.4. Edited by Judith Furlong. Latest version: TBA
[KMIP-TC] Key Management Interoperability Protocol
Test Cases Version 1.4. Edited by Tim Hudson and TBA. Latest version: TBA
[RFC6151]
S. Turner and L. Chen, Updated Security Considerations for the
MD5 Message-Digest and the HMAC-MD5 Algorithms, IETF RFC6151, March 2011, http://www.rfc-editor.org/rfc/rfc6151.txt.
[w1979] A. Shamir, How to share a secret,
Communications of the ACM, vol. 22, no. 11, pp. 612-613, November 1979.
[RFC7292] K. Moriarty, M. Nystrom, S.
Parkinson, A. Rusch, M. Scott. PKCS #12: Personal Information Exchange
Syntax v1.1, July 2014, https://tools.ietf.org/html/rfc7292
The following subsections describe the objects that are
passed between the clients and servers of the key management system. Some of
these object types, called Base Objects, are used only in the protocol
itself, and are not considered Managed Objects. Key management systems MAY
choose to support a subset of the Managed Objects. The object descriptions
refer to the primitive data types of which they are composed. These primitive
data types are (see Section 9.1.1.4):
·
Integer
·
Long Integer
·
Big Integer
·
Enumeration – choices from a predefined list of values
·
Boolean
·
Text String – string of characters representing human-readable
text
·
Byte String – sequence of unencoded byte values
·
Date-Time – date and time, with a granularity of one second
·
Interval – a length of time expressed in seconds
Structures are composed of ordered lists of primitive data
types or sub-structures.
These objects are used within the
messages of the protocol, but are not objects managed by the key management
system. They are components of Managed Objects.
2.1.1
Attribute
An Attribute object is a structure (see Table 2) used for sending and receiving Managed Object attributes. The Attribute Name is a
text-string that is used to identify the attribute. The Attribute Index
is an index number assigned by the key management server. The Attribute Index
is used to identify the particular instance. Attribute Indices SHALL start with
0. The Attribute Index of an attribute SHALL NOT change when other instances
are added or deleted. Single-instance Attributes (attributes which an object
MAY only have at most one instance thereof) SHALL have an Attribute Index of 0.
The Attribute Value is either a primitive data type or structured
object, depending on the attribute.
When an Attribute structure is used to specify or return a
particular instance of an Attribute and the Attribute Index is not specified it
SHALL be assumed to be 0.
|
Object
|
Encoding
|
REQUIRED
|
|
Attribute
|
Structure
|
|
|
Attribute Name
|
Text String
|
Yes
|
|
Attribute Index
|
Integer
|
No
|
|
Attribute Value
|
Varies, depending on attribute. See Section 3
|
Yes, except for the Notify operation (see Section 5.1)
|
Table 2: Attribute Object Structure
A Credential is a structure (see Table 3) used for client identification purposes and is not managed by the key management system
(e.g., user id/password pairs, Kerberos tokens, etc.). It MAY be used for
authentication purposes as indicated in [KMIP-Prof].
|
Object
|
Encoding
|
REQUIRED
|
|
Credential
|
Structure
|
|
|
Credential Type
|
Enumeration, see 9.1.3.2.1
|
Yes
|
|
Credential Value
|
Varies based on Credential Type.
|
Yes
|
Table 3: Credential Object
Structure
If the Credential Type in the Credential is Username and
Password, then Credential Value is a structure as shown in Table 4. The Username field identifies the client, and the Password field is a secret
that authenticates the client.
|
Object
|
Encoding
|
REQUIRED
|
|
Credential Value
|
Structure
|
|
|
Username
|
Text String
|
Yes
|
|
Password
|
Text String
|
No
|
Table 4: Credential Value Structure for the Username and Password Credential
If the Credential Type in the Credential is Device,
then Credential Value is a structure as shown in Table 5. One or a combination
of the Device Serial Number, Network Identifier, Machine
Identifier, and Media Identifier SHALL be unique. Server
implementations MAY enforce policies on uniqueness for individual fields. A
shared secret or password MAY also be used to authenticate the client. The
client SHALL provide at least one field.
|
Object
|
Encoding
|
REQUIRED
|
|
Credential Value
|
Structure
|
|
|
Device Serial Number
|
Text String
|
No
|
|
Password
|
Text String
|
No
|
|
Device Identifier
|
Text String
|
No
|
|
Network Identifier
|
Text String
|
No
|
|
Machine Identifier
|
Text String
|
No
|
|
Media Identifier
|
Text String
|
No
|
Table 5: Credential Value Structure for the Device Credential
If the Credential Type in the Credential is Attestation,
then Credential Value is a structure as shown in Table 6. The Nonce Value
is obtained from the key management server in a Nonce Object. The Attestation
Credential Object can contain a measurement from the client or an assertion
from a third party if the server is not capable or willing to verify the
attestation data from the client. Neither type of attestation data (Attestation
Measurement or Attestation Assertion) is necessary to allow the
server to accept either. However, the client SHALL provide attestation data in
either the Attestation Measurement or Attestation Assertion
fields.
|
Object
|
Encoding
|
REQUIRED
|
|
Credential Value
|
Structure
|
|
|
Nonce
|
Structure, see 2.1.14
|
Yes
|
|
Attestation Type
|
Enumeration, see 9.1.3.2.36
|
Yes
|
|
Attestation Measurement
|
Byte String
|
No
|
|
Attestation Assertion
|
Byte String
|
No
|
Table 6: Credential Value Structure for the Attestation Credential
A Key Block object is a structure (see Table 7) used to encapsulate all of the information that is closely associated with a
cryptographic key. It contains a Key Value of one of the following Key
Format Types:
·
Raw – This is a key that contains only cryptographic key
material, encoded as a string of bytes.
·
Opaque – This is an encoded key for which the encoding is
unknown to the key management system. It is encoded as a string of bytes.
·
PKCS1 – This is an encoded private key, expressed as a
DER-encoded ASN.1 PKCS#1 object.
·
PKCS8 – This is an encoded private key, expressed as a
DER-encoded ASN.1 PKCS#8 object, supporting both the RSAPrivateKey syntax and
EncryptedPrivateKey.
·
X.509 – This is an encoded object, expressed as a
DER-encoded ASN.1 X.509 object.
·
ECPrivateKey – This is an ASN.1 encoded elliptic curve private
key.
·
Several Transparent Key types – These are
algorithm-specific structures containing defined values for the various key
types, as defined in Section 2.1.7.
·
Extensions – These are vendor-specific extensions to allow
for proprietary or legacy key formats.
The Key Block MAY contain the Key Compression Type, which
indicates the format of the elliptic curve public key. By default, the public
key is uncompressed.
The Key Block also has the Cryptographic Algorithm and the
Cryptographic Length of the key contained in the Key Value field. Some example
values are:
·
RSA keys are typically 1024, 2048 or 3072 bits in length.
·
3DES keys are typically from 112 to 192 bits (depending upon key
length and the presence of parity bits).
·
AES keys are 128, 192 or 256 bits in length.
The Key Block SHALL contain a Key Wrapping Data structure
if the key in the Key Value field is wrapped (i.e., encrypted, or MACed/signed,
or both).
|
Object
|
Encoding
|
REQUIRED
|
|
Key Block
|
Structure
|
|
|
Key Format Type
|
Enumeration, see 9.1.3.2.3
|
Yes
|
|
Key Compression Type
|
Enumeration, see 9.1.3.2.2
|
No
|
|
Key Value
|
Byte String: for wrapped Key Value; Structure: for
plaintext Key Value, see 2.1.4
|
No
|
|
Cryptographic Algorithm
|
Enumeration, see 9.1.3.2.13
|
Yes. MAY be omitted only if this information is available from the
Key Value. Does not apply to Secret Data (see Section 2.2.7) or Opaque
Objects (see Section 2.2.8). If
present, the Cryptographic Length SHALL also be present.
|
|
Cryptographic Length
|
Integer
|
Yes. MAY be omitted only if this information is available from the
Key Value. Does not apply to Secret Data (see Section 2.2.7) or Opaque
Objects (see Section 2.2.8). If
present, the Cryptographic Algorithm SHALL also be present.
|
|
Key Wrapping Data
|
Structure, see 2.1.5
|
No. SHALL only be present if the key is wrapped.
|
Table 7: Key Block Object Structure
The Key Value is used only inside a Key Block and
is either a Byte String or a structure (see Table 8):
·
The Key Value structure contains the key material, either as a
byte string or as a Transparent Key structure (see Section 2.1.7), and OPTIONAL attribute information that is associated and encapsulated with
the key material. This attribute information differs from the attributes
associated with Managed Objects, and is obtained via the Get Attributes
operation, only by the fact that it is encapsulated with (and possibly wrapped
with) the key material itself.
·
The Key Value Byte String is either the wrapped TTLV-encoded (see
Section 9.1) Key Value structure, or the wrapped un-encoded value of the Byte
String Key Material field.
|
Object
|
Encoding
|
REQUIRED
|
|
Key Value
|
Structure
|
|
|
Key Material
|
Byte String: for Raw, Opaque, PKCS1, PKCS8,
ECPrivateKey, or Extension Key Format types;
Structure:
for Transparent, or Extension Key Format Types
|
Yes
|
|
Attribute
|
Attribute Object, see Section 2.1.1
|
No. MAY be repeated
|
Table 8: Key Value Object Structure
The Key Block MAY also supply OPTIONAL information about a
cryptographic key wrapping mechanism used to wrap the Key Value. This consists
of a Key Wrapping Data structure (see Table 9). It is only used inside a Key Block.
This structure contains fields for:
·
A Wrapping Method, which indicates the method used to wrap
the Key Value.
·
Encryption Key Information, which contains the Unique
Identifier (see 3.1) value of the encryption key and associated cryptographic
parameters.
·
MAC/Signature Key Information, which contains the Unique
Identifier value of the MAC/signature key and associated cryptographic
parameters.
·
A MAC/Signature, which contains a MAC or signature of the
Key Value.
·
An IV/Counter/Nonce, if REQUIRED by the wrapping method.
·
An Encoding Option, specifying the encoding of the Key
Material within the Key Value structure of the Key Block that has been wrapped.
If No Encoding is specified, then the Key Value structure SHALL NOT contain any
attributes.
If wrapping is used, then the whole Key Value structure is
wrapped unless otherwise specified by the Wrapping Method. The algorithms used
for wrapping are given by the Cryptographic Algorithm attributes of the
encryption key and/or MAC/signature key; the block-cipher mode, padding method,
and hashing algorithm used for wrapping are given by the Cryptographic
Parameters in the Encryption Key Information and/or MAC/Signature Key
Information, or, if not present, from the Cryptographic Parameters attribute of
the respective key(s). Either the Encryption Key Information or the
MAC/Signature Key Information (or both) in the Key Wrapping Data structure
SHALL be specified.
The following wrapping methods are currently defined:
·
Encrypt only (i.e., encryption using a symmetric key or
public key, or authenticated encryption algorithms that use a single key).
·
MAC/sign only (i.e., either MACing the Key Value with a
symmetric key, or signing the Key Value with a private key).
·
Encrypt then MAC/sign.
·
MAC/sign then encrypt.
·
TR-31.
·
Extensions.
The following encoding options
are currently defined:
·
No Encoding (i.e., the wrapped un-encoded value of the
Byte String Key Material field in the Key Value structure).
·
TTLV Encoding (i.e., the wrapped TTLV-encoded Key Value
structure).
|
Object
|
Encoding
|
REQUIRED
|
|
Key Wrapping Data
|
Structure
|
|
|
Wrapping Method
|
Enumeration, see 9.1.3.2.4
|
Yes
|
|
Encryption Key
Information
|
Structure, see below
|
No. Corresponds to the key that was used to encrypt the Key Value.
|
|
MAC/Signature Key
Information
|
Structure, see below
|
No. Corresponds to the symmetric key used
to MAC the Key Value or the private key used to sign the Key Value
|
|
MAC/Signature
|
Byte String
|
No
|
|
IV/Counter/Nonce
|
Byte String
|
No
|
|
Encoding Option
|
Enumeration, see 9.1.3.2.32
|
No. Specifies the encoding of the Key Value Byte
String. If not present, the wrapped Key Value structure SHALL be TTLV
encoded.
|
Table
9: Key Wrapping Data Object Structure
The structures of the Encryption
Key Information (see Table 10) and the MAC/Signature Key Information (see Table 11) are as follows:
|
Object
|
Encoding
|
REQUIRED
|
|
Encryption Key Information
|
Structure
|
|
|
Unique Identifier
|
Text string, see 3.1
|
Yes
|
|
Cryptographic Parameters
|
Structure, see 3.6
|
No
|
Table
10: Encryption Key Information Object Structure
|
Object
|
Encoding
|
REQUIRED
|
|
MAC/Signature Key Information
|
Structure
|
|
|
Unique Identifier
|
Text string, see 3.1
|
Yes. It SHALL be either the Unique
Identifier of the Symmetric Key used to MAC, or of the Private Key (or its
corresponding Public Key) used to sign.
|
|
Cryptographic Parameters
|
Structure, see 3.6
|
No
|
Table
11: MAC/Signature Key Information Object Structure
This is a separate structure (see Table 12) that is
defined for operations that provide the option to return wrapped keys. The Key Wrapping Specification SHALL be included
inside the operation request if clients request the server to return a wrapped
key. If Cryptographic Parameters are specified in the Encryption Key
Information and/or the MAC/Signature Key Information of the Key
Wrapping Specification, then the server SHALL verify that they match one of the
instances of the Cryptographic Parameters attribute of the corresponding key.
If Cryptographic Parameters are omitted, then the server SHALL use the
Cryptographic Parameters attribute with the lowest Attribute Index of the
corresponding key. If the corresponding key does not have any Cryptographic
Parameters attribute, or if no match is found, then an error is returned.
This structure contains:
·
A Wrapping Method that indicates the method used to wrap the Key
Value.
·
Encryption Key Information with the Unique Identifier value of
the encryption key and associated cryptographic parameters.
·
MAC/Signature Key Information with the Unique Identifier value of
the MAC/signature key and associated cryptographic parameters.
·
Zero or more Attribute Names to indicate the attributes to be
wrapped with the key material.
·
An Encoding Option, specifying the encoding of the Key Value
before wrapping. If No Encoding is specified, then the Key Value SHALL NOT
contain any attributes
|
Object
|
Encoding
|
REQUIRED
|
|
Key Wrapping Specification
|
Structure
|
|
|
Wrapping Method
|
Enumeration, see 9.1.3.2.4
|
Yes
|
|
Encryption Key
Information
|
Structure, see 2.1.5
|
No, SHALL be present if MAC/Signature Key Information
is omitted
|
|
MAC/Signature Key
Information
|
Structure, see 2.1.5
|
No, SHALL be present if Encryption Key
Information is omitted
|
|
Attribute Name
|
Text String
|
No, MAY be repeated
|
|
Encoding Option
|
Enumeration, see 9.1.3.2.32
|
No. If Encoding Option is not present, the wrapped
Key Value SHALL be TTLV encoded.
|
Table
12: Key Wrapping Specification Object Structure
2.1.7
Transparent Key Structures
Transparent Key structures describe the necessary
parameters to obtain the key material. They are used in the Key Value
structure. The mapping to the parameters specified in other standards is shown
in Table 13.
|
Object
|
Description
|
Mapping
|
|
P
|
For DSA and DH, the (large) prime field order.
For RSA, a prime factor of the modulus.
|
p in [FIPS186-4], [X9.42],
[SP800-56A]
p in [PKCS#1], [FIPS186-4]
|
|
Q
|
For DSA and DH, the (small) prime multiplicative subgroup order.
For RSA, a prime factor of the modulus.
|
q in [FIPS186-4], [X9.42],
[SP800-56A]
q in [PKCS#1], [FIPS186-4]
|
|
G
|
The generator of the subgroup of order Q.
|
g in [FIPS186-4], [X9.42],
[SP800-56A]
|
|
X
|
DSA or DH private key.
|
x in [FIPS186-4]
x, xu, xv in [X9.42],
[SP800-56A] for static private keys
r, ru, rv in [X9.42],
[SP800-56A] for ephemeral private keys
|
|
Y
|
DSA or DH public key.
|
y in [FIPS186-4]
y, yu, yv in [X9.42],
[SP800-56A] for static public keys
t, tu, tv in [X9.42],
[SP800-56A] for ephemeral public keys
|
|
J
|
DH cofactor integer, where P = JQ + 1.
|
j in [X9.42]
|
|
Modulus
|
RSA modulus PQ, where P and Q are distinct primes.
|
n in [PKCS#1], [FIPS186-4]
|
|
Private Exponent
|
RSA private exponent.
|
d in [PKCS#1], [FIPS186-4]
|
|
Public Exponent
|
RSA public exponent.
|
e in [PKCS#1], [FIPS186-4]
|
|
Prime Exponent P
|
RSA private exponent for the prime factor P in the CRT format, i.e.,
Private Exponent (mod (P-1)).
|
dP in [PKCS#1], [FIPS186-4]
|
|
Prime Exponent Q
|
RSA private exponent for the prime factor Q in the CRT format, i.e.,
Private Exponent (mod (Q-1)).
|
dQ in [PKCS#1], [FIPS186-4]
|
|
CRT Coefficient
|
The (first) CRT coefficient, i.e., Q-1 mod P.
|
qInv in [PKCS#1], [FIPS186-4]
|
|
Recommended Curve
|
NIST Recommended Curves (e.g., P-192).
|
See Appendix D of [FIPS186-4]
|
|
D
|
Elliptic curve private key.
|
d; de,U,de,V (ephemeral private keys); ds,U,ds,V
(static private keys) in [X9.62], [FIPS186-4]
|
|
Q String
|
Elliptic curve public key.
|
Q; Qe,U,Qe,V (ephemeral public keys); Qs,U,Qs,V
(static public keys) in [X9.62], [FIPS186-4]
|
Table 13: Parameter mapping.
2.1.7.1
Transparent Symmetric Key
If the Key Format Type in the Key
Block is Transparent Symmetric Key, then Key Material is a structure as
shown in Table 14.
|
Object
|
Encoding
|
REQUIRED
|
|
Key Material
|
Structure
|
|
|
Key
|
Byte String
|
Yes
|
Table 14: Key Material Object Structure for Transparent
Symmetric Keys
If the Key Format Type in the Key
Block is Transparent DSA Private Key, then Key Material is a structure
as shown in Table 15.
|
Object
|
Encoding
|
REQUIRED
|
|
Key Material
|
Structure
|
|
|
P
|
Big Integer
|
Yes
|
|
Q
|
Big Integer
|
Yes
|
|
G
|
Big Integer
|
Yes
|
|
X
|
Big Integer
|
Yes
|
Table 15: Key Material Object Structure for Transparent DSA
Private Keys
If the Key Format Type in the Key
Block is Transparent DSA Public Key, then Key Material is a structure as
shown in Table 16.
|
Object
|
Encoding
|
REQUIRED
|
|
Key Material
|
Structure
|
|
|
P
|
Big Integer
|
Yes
|
|
Q
|
Big Integer
|
Yes
|
|
G
|
Big Integer
|
Yes
|
|
Y
|
Big Integer
|
Yes
|
Table 16: Key Material Object Structure for Transparent DSA
Public Keys
If the Key Format Type in the Key
Block is Transparent RSA Private Key, then Key Material is a structure
as shown in Table 17.
|
Object
|
Encoding
|
REQUIRED
|
|
Key Material
|
Structure
|
|
|
Modulus
|
Big Integer
|
Yes
|
|
Private Exponent
|
Big Integer
|
No
|
|
Public Exponent
|
Big Integer
|
No
|
|
P
|
Big Integer
|
No
|
|
Q
|
Big Integer
|
No
|
|
Prime Exponent P
|
Big Integer
|
No
|
|
Prime Exponent Q
|
Big Integer
|
No
|
|
CRT Coefficient
|
Big Integer
|
No
|
Table
17: Key Material Object Structure for Transparent RSA Private Keys
One of the following SHALL be
present (refer to [PKCS#1]):
·
Private Exponent,
·
P and Q (the first two prime factors of Modulus), or
·
Prime Exponent P and Prime Exponent Q.
2.1.7.5
Transparent RSA Public Key
If the Key Format Type in the Key
Block is Transparent RSA Public Key, then Key Material is a structure as
shown in Table 18.
|
Object
|
Encoding
|
REQUIRED
|
|
Key Material
|
Structure
|
|
|
Modulus
|
Big Integer
|
Yes
|
|
Public Exponent
|
Big Integer
|
Yes
|
Table 18: Key Material Object Structure for Transparent RSA
Public Keys
If the Key Format Type in the Key
Block is Transparent DH Private Key, then Key Material is a structure as
shown in Table 19.
|
Object
|
Encoding
|
REQUIRED
|
|
Key Material
|
Structure
|
|
|
P
|
Big Integer
|
Yes
|
|
Q
|
Big Integer
|
No
|
|
G
|
Big Integer
|
Yes
|
|
J
|
Big Integer
|
No
|
|
X
|
Big Integer
|
Yes
|
Table
19: Key Material Object Structure for Transparent DH Private Keys
2.1.7.7
Transparent DH Public Key
If the Key Format Type in the Key
Block is Transparent DH Public Key, then Key Material is a structure as
shown in Table 20.
|
Object
|
Encoding
|
REQUIRED
|
|
Key Material
|
Structure
|
|
|
P
|
Big Integer
|
Yes
|
|
Q
|
Big Integer
|
No
|
|
G
|
Big Integer
|
Yes
|
|
J
|
Big Integer
|
No
|
|
Y
|
Big Integer
|
Yes
|
Table
20: Key Material Object Structure for Transparent DH Public Keys
2.1.7.8
Transparent ECDSA Private Key
The Transparent ECDSA Private Key
structure is deprecated as of version 1.3 of this specification and MAY be
removed from subsequent versions of the specification. The Transparent EC
Private Key structure SHOULD be used as a replacement.
If the Key Format Type in the Key
Block is Transparent ECDSA Private Key, then Key Material is a structure
as shown in Table 21.
|
Object
|
Encoding
|
REQUIRED
|
|
Key Material
|
Structure
|
|
|
Recommended
Curve
|
Enumeration,
see 9.1.3.2.5
|
Yes
|
|
D
|
Big Integer
|
Yes
|
Table 21: Key Material Object Structure for Transparent
ECDSA Private Keys
The Transparent ECDSA Public Key
structure is deprecated as of version 1.3 of this specification and MAY be
removed from subsequent versions of the specification. The Transparent EC
Public Key structure SHOULD be used as a replacement.
If the Key Format Type in the Key
Block is Transparent ECDSA Public Key, then Key Material is a structure
as shown in Table 22.
|
Object
|
Encoding
|
REQUIRED
|
|
Key Material
|
Structure
|
|
|
Recommended
Curve
|
Enumeration,
see 9.1.3.2.5
|
Yes
|
|
Q String
|
Byte String
|
Yes
|
Table
22: Key Material Object Structure for Transparent ECDSA Public Keys
The Transparent ECDH Private Key
structure is deprecated as of version 1.3 of this specification and MAY be
removed from subsequent versions of the specification. The Transparent EC
Private Key structure SHOULD be used as a replacement.
If the Key Format Type in the Key
Block is Transparent ECDH Private Key, then Key Material is a structure
as shown in Table 23.
|
Object
|
Encoding
|
REQUIRED
|
|
Key Material
|
Structure
|
|
|
Recommended
Curve
|
Enumeration,
see 9.1.3.2.5
|
Yes
|
|
D
|
Big Integer
|
Yes
|
Table 23: Key Material Object Structure for Transparent
ECDH Private Keys
The Transparent ECDH Public Key
structure is deprecated as of version 1.3 of this specification and MAY be
removed from subsequent versions of the specification. The Transparent EC
Public Key structure SHOULD be used as a replacement.
If the Key Format Type in the Key
Block is Transparent ECDH Public Key, then Key Material is a structure
as shown in Table 24.
|
Object
|
Encoding
|
REQUIRED
|
|
Key Material
|
Structure
|
|
|
Recommended
Curve
|
Enumeration,
see 9.1.3.2.5
|
Yes
|
|
Q String
|
Byte String
|
Yes
|
Table 24: Key Material Object Structure for Transparent
ECDH Public Keys
The Transparent ECMQV Private Key
structure is deprecated as of version 1.3 of this specification and MAY be
removed from subsequent versions of the specification. The Transparent EC
Private Key structure SHOULD be used as a replacement.
If the Key Format Type in the Key
Block is Transparent ECMQV Private Key, then Key Material is a structure
as shown in Table 25.
|
Object
|
Encoding
|
REQUIRED
|
|
Key Material
|
Structure
|
|
|
Recommended
Curve
|
Enumeration,
see 9.1.3.2.5
|
Yes
|
|
D
|
Big Integer
|
Yes
|
Table 25: Key Material Object Structure for Transparent ECMQV Private Keys
The Transparent ECMQV Public Key
structure is deprecated as of version 1.3 of this specification and MAY be
removed from subsequent versions of the specification. The Transparent EC
Public Key structure SHOULD be used as a replacement.
If the Key Format Type in the Key
Block is Transparent ECMQV Public Key, then Key Material is a structure
as shown in Table 26.
|
Object
|
Encoding
|
REQUIRED
|
|
Key Material
|
Structure
|
|
|
Recommended
Curve
|
Enumeration,
see 9.1.3.2.5
|
Yes
|
|
Q String
|
Byte String
|
Yes
|
Table 26: Key Material Object Structure for Transparent ECMQV Public Keys
If the Key Format Type in the Key
Block is Transparent EC Private Key, then Key Material is a structure as
shown in Table 27.
|
Object
|
Encoding
|
REQUIRED
|
|
Key Material
|
Structure
|
|
|
Recommended
Curve
|
Enumeration,
see 9.1.3.2.5
|
Yes
|
|
D
|
Big Integer
|
Yes
|
Table 27: Key Material Object Structure for Transparent EC Private Keys
If the Key Format Type in the Key
Block is Transparent EC Public Key, then Key Material is a structure as
shown in Table 28.
|
Object
|
Encoding
|
REQUIRED
|
|
Key Material
|
Structure
|
|
|
Recommended
Curve
|
Enumeration,
see 9.1.3.2.5
|
Yes
|
|
Q String
|
Byte String
|
Yes
|
Table 28: Key Material Object Structure for Transparent EC Public Keys
The Template Managed Object is deprecated as of
version 1.3 of this specification and MAY be removed from subsequent versions
of the specification. Individual Attributes SHOULD be used in operations which
currently support use of a Name within a Template-Attribute to
reference a Template.
These structures are used in various operations to provide
the desired attribute values and/or template names in the request and to return
the actual attribute values in the response.
The Template-Attribute,
Common Template-Attribute, Private Key Template-Attribute, and Public
Key Template-Attribute structures are defined identically as follows:
|
Object
|
Encoding
|
REQUIRED
|
|
Template-Attribute,
Common Template-Attribute, Private Key
Template-Attribute,
Public Key Template-Attribute
|
Structure
|
|
|
Name
|
Structure, see 3.2
|
No, MAY be repeated. (deprecated)
|
|
Attribute
|
Attribute Object, see 2.1.1
|
No, MAY be repeated
|
Table
29: Template-Attribute Object Structure
Name is the Name attribute of the Template object defined in
Section 2.2.6.
An Extension Information object is a structure (see
Table 30) describing Objects with Item Tag values in the Extensions range. The
Extension Name is a Text String that is used to name the Object (first column
of Table 288). The Extension Tag is the Item Tag Value of the Object (see Table 288). The Extension Type is the Item Type Value of the Object (see Table 286).
|
Object
|
Encoding
|
REQUIRED
|
|
Extension Information
|
Structure
|
|
|
Extension Name
|
Text String
|
Yes
|
|
Extension Tag
|
Integer
|
No
|
|
Extension Type
|
Integer
|
No
|
Table 30: Extension Information Structure
The Data object is used in requests and responses
in cryptographic operations that pass data between the client and the server.
|
Object
|
Encoding
|
|
Data
|
Byte String
|
Table 31: Data Structure
The Data Length is used in requests in cryptographic
operations to indicate the amount of data expected in a response.
|
Object
|
Encoding
|
|
Data Length
|
Integer
|
Table 32: Data Length Structure
The Signature Data is used in requests and
responses in cryptographic operations that pass signature data between the
client and the server.
|
Object
|
Encoding
|
|
Signature Data
|
Byte String
|
Table 33: Signature Data Structure
The MAC Data is used in requests and responses in
cryptographic operations that pass MAC data between the client and the server.
|
Object
|
Encoding
|
|
MAC Data
|
Byte String
|
Table 34: MAC Data Structure
A Nonce object is a structure (see Table 35) used by the server to send a random value to the client. The Nonce Identifier is assigned
by the server and used to identify the Nonce object. The Nonce Value consists
of the random data created by the server.
|
Object
|
Encoding
|
REQUIRED
|
|
Nonce
|
Structure
|
|
|
Nonce ID
|
Byte String
|
Yes
|
|
Nonce Value
|
Byte String
|
Yes
|
Table 35: Nonce Structure
The Correlation Value is used in requests and
responses in cryptographic operations that support multi-part (streaming)
operations. This is generated by the server and returned in the first response
to an operation that is being performed across multiple requests. Note: the
server decides which operations are supported for multi-part usage. A
server-generated correlation value SHALL be specified in any subsequent
cryptographic operations that pertain to the original operation.
|
Object
|
Encoding
|
|
Correlation Value
|
Byte String
|
Table 36: Correlation Value Structure
The Init Indicator is used in requests in
cryptographic operations that support multi-part (streaming) operations. This
is provided in the first request with a value of True to an operation that is
being performed across multiple requests.
|
Object
|
Encoding
|
|
Init Indicator
|
Boolean
|
Table 37: Init Indicator Structure
The Final Indicator is used in requests in
cryptographic operations that support multi-part (streaming) operations. This
is provided in the final (last) request with a value of True to an operation
that is being performed across multiple requests.
|
Object
|
Encoding
|
|
Final Indicator
|
Boolean
|
Table 38: Final Indicator Structure
2.1.18 RNG Parameters
The RNG Parameters
base object is a structure that contains a mandatory RNG Algorithm and a set of
OPTIONAL fields that describe a Random Number Generator. Specific fields
pertain only to certain types of RNGs.
The RNG Algorithm SHALL be
specified and if the algorithm implemented is unknown or the implementation
does not want to provide the specific details of the RNG Algorithm then the
Unspecified enumeration SHALL be used.
If the cryptographic
building blocks used within the RNG are known they MAY be specified in combination
of the remaining fields within the RNG Parameters structure.
|
Object
|
Encoding
|
REQUIRED
|
|
RNG Parameters
|
Structure
|
|
|
RNG Algorithm
|
Enumeration, see 9.1.3.2.37
|
Yes
|
|
Cryptographic Algorithm
|
Enumeration, see
9.1.3.2.13
|
No
|
|
Cryptographic Length
|
Integer
|
No
|
|
Hashing Algorithm
|
Enumeration, see
9.1.3.2.16
|
No
|
|
DRBG Algorithm
|
Enumeration, see 9.1.3.2.38
|
No
|
|
Recommended Curve
|
Enumeration, see
9.1.3.2.5
|
No
|
|
FIPS186 Variation
|
Enumeration, see 9.1.3.2.39
|
No
|
|
Prediction Resistance
|
Boolean
|
No
|
Table 39: RNG Parameters Structure
The Profile Information base object is a structure
that contains details of the supported profiles. Specific fields MAY pertain
only to certain types of profiles.
|
Object
|
Encoding
|
REQUIRED
|
|
Profile Information
|
Structure
|
|
|
Profile Name
|
Enumeration, see 9.1.3.2.42
|
Yes
|
|
Server URI
|
Text String
|
No
|
|
Server Port
|
Integer
|
No
|
Table 40: Profile Information Structure
The Validation Information base object is a structure
that contains details of a formal validation. Specific fields MAY pertain only
to certain types of validations.
|
Object
|
Encoding
|
REQUIRED
|
|
Validation Information
|
Structure
|
|
|
Validation Authority
Type
|
Enumeration, see 9.1.3.2.40
|
Yes
|
|
Validation Authority
Country
|
Text String
|
No
|
|
Validation Authority
URI
|
Text String
|
No
|
|
Validation Version
Major
|
Integer
|
Yes
|
|
Validation Version Minor
|
Integer
|
No
|
|
Validation Type
|
Enumeration, see 0
|
Yes
|
|
Validation Level
|
Integer
|
Yes
|
|
Validation Certificate
Identifier
|
Text String
|
No
|
|
Validation Certificate
URI
|
Text String
|
No
|
|
Validation Vendor URI
|
Text String
|
No
|
|
Validation Profile
|
Text String (MAY be
repeated)
|
No
|
Table 41: Validation Information Structure
The Validation Authority along with the Validation Version
Major, Validation Type and Validation Level SHALL be provided to uniquely
identify a validation for a given validation authority. If the Validation
Certificate URI is not provided the server SHOULD include a Validation Vendor
URI from which information related to the validation is available.
The Validation Authority Country is the two letter ISO
country code.
The Capability Information base object is a structure
that contains details of the supported capabilities.
|
Object
|
Encoding
|
REQUIRED
|
|
Capability Information
|
Structure
|
|
|
Streaming Capability
|
Boolean
|
No
|
|
Asynchronous Capability
|
Boolean
|
No
|
|
Attestation Capability
|
Boolean
|
No
|
|
Batch Undo Capability
|
Boolean
|
No
|
|
Batch Continue
Capability
|
Boolean
|
No
|
|
Unwrap Mode
|
Enumeration, see 9.1.3.2.43
|
No
|
|
Destroy Action
|
Enumeration, see 9.1.3.2.44
|
No
|
|
Shredding Algorithm
|
Enumeration, see 9.1.3.2.45
|
No
|
|
RNG Mode
|
Enumeration, see 9.1.3.2.46
|
No
|
Table 42: Capability Information Structure
The Authenticated Encryption Additional Data object is used
in authenticated encryption and decryption operations that require the optional
additional data to be provided by the client.
|
Object
|
Encoding
|
REQUIRED
|
|
Authenticated Encryption Additional Data
|
Byte String
|
No
|
Table 43 Authenticated
Encryption Additional Data
The Authenticated Encryption Tag object is used to validate
the integrity of the data encrypted and decrypted in Authenticated Encryption
modes. It is an output from the encryption process and an input to the
decryption process. See [SP800-38D].
|
Object
|
Encoding
|
REQUIRED
|
|
Authenticated Encryption Tag
|
Byte String
|
No
|
Table 44 Authenticated
Encryption Tag
Managed Objects are objects that are the subjects of key
management operations, which are described in Sections 4 and 5. Managed Cryptographic Objects are the subset of Managed Objects that contain
cryptographic material (e.g., certificates, keys, and secret data).
2.2.1
Certificate
A Managed Cryptographic Object that is a digital
certificate. It is a DER-encoded X.509 public key certificate. The PGP
certificate type is deprecated as of version 1.2 of this specification and MAY
be removed from subsequent versions of the specification. The PGP Key object
(see section 2.2.9) SHOULD be used instead.
|
Object
|
Encoding
|
REQUIRED
|
|
Certificate
|
Structure
|
|
|
Certificate Type
|
Enumeration, see 9.1.3.2.6
|
Yes
|
|
Certificate Value
|
Byte String
|
Yes
|
Table
45: Certificate Object Structure
A Managed Cryptographic Object that is a symmetric key.
|
Object
|
Encoding
|
REQUIRED
|
|
Symmetric Key
|
Structure
|
|
|
Key Block
|
Structure, see 2.1.3
|
Yes
|
Table
46: Symmetric Key Object Structure
A Managed Cryptographic Object that is the public portion
of an asymmetric key pair. This is only a public key, not a certificate.
|
Object
|
Encoding
|
REQUIRED
|
|
Public Key
|
Structure
|
|
|
Key Block
|
Structure, see 2.1.3
|
Yes
|
Table
47: Public Key Object Structure
A Managed Cryptographic Object that is the private portion
of an asymmetric key pair.
|
Object
|
Encoding
|
REQUIRED
|
|
Private Key
|
Structure
|
|
|
Key Block
|
Structure, see 2.1.3
|
Yes
|
Table
48: Private Key Object Structure
A Managed Cryptographic Object that is a Split Key.
A split key is a secret, usually a symmetric key or a private key that has been
split into a number of parts, each of which MAY then be distributed to several
key holders, for additional security. The Split Key Parts field
indicates the total number of parts, and the Split Key Threshold field
indicates the minimum number of parts needed to reconstruct the entire key. The
Key Part Identifier indicates which key part is contained in the
cryptographic object, and SHALL be at least 1 and SHALL be less than or equal
to Split Key Parts.
|
Object
|
Encoding
|
REQUIRED
|
|
Split Key
|
Structure
|
|
|
Split Key Parts
|
Integer
|
Yes
|
|
Key Part Identifier
|
Integer
|
Yes
|
|
Split Key Threshold
|
Integer
|
Yes
|
|
Split Key Method
|
Enumeration, see 9.1.3.2.8
|
Yes
|
|
Prime Field Size
|
Big Integer
|
No, REQUIRED only if Split Key Method is Polynomial
Sharing Prime Field.
|
|
Key Block
|
Structure, see 2.1.3
|
Yes
|
Table 49: Split Key Object Structure
There are three Split Key
Methods for secret sharing: the first one is based on XOR, and the other
two are based on polynomial secret sharing, according to [w1979].
Let L
be the minimum number of bits needed to represent all values of the secret.
·
When the Split Key Method is XOR, then the Key Material in the
Key Value of the Key Block is of length L
bits. The number of split keys is Split Key Parts (identical to Split Key
Threshold), and the secret is reconstructed by XORing all of the parts.
·
When the Split Key Method is Polynomial Sharing Prime Field, then
secret sharing is performed in the field GF(Prime Field Size),
represented as integers, where Prime Field Size is a prime bigger than 2L.
·
When the Split Key Method is Polynomial Sharing GF(216),
then secret sharing is performed in the field GF(216). The Key
Material in the Key Value of the Key Block is a bit string of length L, and when L
is bigger than 216, then secret sharing is applied piecewise in
pieces of 16 bits each. The Key Material in the Key Value of the Key Block is
the concatenation of the corresponding shares of all pieces of the secret.
Secret sharing is performed in the field GF(216),
which is represented as an algebraic extension of GF(28):
GF(216) ≈ GF(28) [y]/(y2+y+m),
where m is defined later.
An element of this field then consists of a linear
combination uy + v, where u and v are elements of the
smaller field GF(28).
The representation of field elements and the notation
in this section rely on [FIPS197], Sections 3 and 4.
The field GF(28) is as described in [FIPS197],
GF(28) ≈ GF(2) [x]/(x8+x4+x3+x+1).
An element of GF(28) is represented as a
byte. Addition and subtraction in GF(28) is performed as a bit-wise
XOR of the bytes. Multiplication and inversion are more complex (see [FIPS197] Section 4.1 and 4.2 for details).
An element of GF(216) is represented as a
pair of bytes (u, v). The element m is given by
m = x5+x4+x3+x,
which is represented by the byte 0x3A (or {3A} in
notation according to [FIPS197]).
Addition and subtraction in GF(216) both
correspond to simply XORing the bytes. The product of two elements ry + s
and uy + v is given by
(ry + s) (uy + v)
= ((r + s)(u + v) + sv)y + (ru
+ svm).
The inverse of an element uy + v is given
by
(uy + v)-1 = ud-1y
+ (u + v)d-1, where d = (u + v)v
+ mu2.
2.2.6
Template
The Template Managed Object is deprecated as of
version 1.3 of this specification and MAY be removed from subsequent versions
of the specification. Individual Attributes SHOULD be used in operations which
currently support use of a Template.
A Template is a named Managed Object containing the
client-settable attributes of a Managed Cryptographic Object. A Template is
used to specify the attributes of a new Managed Cryptographic Object in various
operations. Attributes associated with a Managed Object MAY also be specified
in the Template-Attribute structures in the operations in Section 4.
Attributes specified in a Template apply to any object
created that reference the Template by name using the Name object in any of the
Template-Attribute structures in Section 2.1.7.14.
The name of a Template (as it is for any Managed Object)
is specified as an Attribute in the Template-Attribute structure in the
Register operation where the Attribute Name is "Name" and the
Attribute Value is the name of the Template Managed Object.
|
Object
|
Encoding
|
REQUIRED
|
|
Template
|
Structure
|
|
|
Attribute
|
Attribute Object, see 2.1.1
|
Yes. MAY be repeated.
|
Table 50: Template Object Structure
A Managed Cryptographic Object containing a shared secret
value that is not a key or certificate (e.g., a password). The Key Block of the
Secret Data object contains a Key Value of the Secret Data Type. The Key
Value MAY be wrapped.
|
Object
|
Encoding
|
REQUIRED
|
|
Secret Data
|
Structure
|
|
|
Secret Data Type
|
Enumeration, see 9.1.3.2.9
|
Yes
|
|
Key Block
|
Structure, see 2.1.3
|
Yes
|
Table
51: Secret Data Object Structure
A Managed Object that the key management server is
possibly not able to interpret. The context information for this object MAY be
stored and retrieved using Custom Attributes.
|
Object
|
Encoding
|
REQUIRED
|
|
Opaque Object
|
Structure
|
|
|
Opaque Data Type
|
Enumeration, see 9.1.3.2.10
|
Yes
|
|
Opaque Data Value
|
Byte String
|
Yes
|
Table
52: Opaque Object Structure
A Managed Cryptographic Object that is a text-based
representation of a PGP key. The Key Block field, indicated below, will contain
the ASCII-armored export of a PGP key in the format as specified in RFC 4880. It
MAY contain only a public key block, or both a public and private key block. Two
different versions of PGP keys, version 3 and version 4, MAY be stored in this
Managed Cryptographic Object.
KMIP implementers SHOULD treat the Key Block field as an
opaque blob. PGP-aware KMIP clients SHOULD take on the responsibility of
decomposing the Key Block into other Managed Cryptographic Objects (Public
Keys, Private Keys, etc.).
|
Object
|
Encoding
|
REQUIRED
|
|
PGP Key
|
Structure
|
|
|
PGP Key Version
|
Integer
|
Yes
|
|
Key Block
|
Structure, see 2.1.3
|
Yes
|
Table 53: PGP Key Object Structure
The following subsections describe the attributes that are
associated with Managed Objects. Attributes that an object MAY have multiple
instances of are referred to as multi-instance attributes. All instances
of an attribute SHOULD have a different value. Similarly, attributes which an
object SHALL only have at most one instance of are referred to as single-instance
attributes. Attributes are able to be obtained by a client from the server
using the Get Attribute operation. Some attributes are able to be set by the
Add Attribute operation or updated by the Modify Attribute operation, and some
are able to be deleted by the Delete Attribute operation if they no longer
apply to the Managed Object. Read-only attributes are attributes that
SHALL NOT be modified by either server or client, and that SHALL NOT be deleted
by a client.
When attributes are returned by the server (e.g., via a
Get Attributes operation), the attribute value returned MAY differ for
different clients (e.g., the Cryptographic Usage Mask value MAY be different
for different clients, depending on the policy of the server).
The first table in each subsection contains the attribute
name in the first row. This name is the canonical name used when managing
attributes using the Get Attributes, Get Attribute List, Add Attribute, Modify
Attribute, and Delete Attribute operations.
A server SHALL NOT delete attributes without receiving a
request from a client until the object is destroyed. After an object is
destroyed, the server MAY retain all, some or none of the object attributes,
depending on the object type and server policy.
The second table in each subsection lists certain
attribute characteristics (e.g., “SHALL always have a value”): Table 54 below explains the meaning of each characteristic that MAY appear in those
tables. The server policy MAY further restrict these attribute characteristics.
|
SHALL always have a value
|
All Managed Objects that are of the Object Types for which this
attribute applies, SHALL always have this attribute set once the object has
been created or registered, up until the object has been destroyed.
|
|
Initially set by
|
Who is permitted to initially set the value of the attribute (if the
attribute has never been set, or if all the attribute values have been
deleted)?
|
|
Modifiable by server
|
Is the server allowed to change an existing value of the attribute
without receiving a request from a client?
|
|
Modifiable by client
|
Is the client able to change an existing value of the attribute value
once it has been set?
|
|
Deletable by client
|
Is the client able to delete an instance of the attribute?
|
|
Multiple instances permitted
|
Are multiple instances of the attribute permitted?
|
|
When implicitly set
|
Which operations MAY cause this attribute to be set even if the
attribute is not specified in the operation request itself?
|
|
Applies to Object Types
|
Which Managed Objects MAY have this attribute set?
|
Table 54: Attribute Rules
The Unique Identifier is generated by the key
management system to uniquely identify a Managed Object. It is only REQUIRED to
be unique within the identifier space managed by a single key management
system, however this identifier SHOULD be globally unique in order to allow for
a key management domain export of such objects. This attribute SHALL be
assigned by the key management system at creation or registration time, and
then SHALL NOT be changed or deleted before the object is destroyed.
|
Object
|
Encoding
|
|
|
Unique Identifier
|
Text String
|
|
Table 55: Unique Identifier Attribute
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Create, Create Key Pair, Register, Derive Key,
Certify, Re-certify, Re-key, Re-key Key Pair
|
|
Applies to Object Types
|
All Objects
|
Table 56: Unique Identifier Attribute Rules
The Name attribute is a structure (see Table 57) used to identify and locate an object. This attribute is assigned by the
client, and the Name Value is intended to be in a form that humans are
able to interpret. The key management system MAY specify rules by which the
client creates valid names. Clients are informed of such rules by a mechanism
that is not specified by this standard. Names SHALL be unique within a given
key management domain, but are NOT REQUIRED to be globally unique.
|
Object
|
Encoding
|
REQUIRED
|
|
Name
|
Structure
|
|
|
Name Value
|
Text String
|
Yes
|
|
Name Type
|
Enumeration, see 9.1.3.2.11
|
Yes
|
Table
57: Name Attribute Structure
|
SHALL always have a value
|
No
|
|
Initially set by
|
Client
|
|
Modifiable by server
|
Yes
|
|
Modifiable by client
|
Yes
|
|
Deletable by client
|
Yes
|
|
Multiple instances permitted
|
Yes
|
|
When implicitly set
|
Re-key, Re-key Key Pair, Re-certify
|
|
Applies to Object Types
|
All Objects
|
Table
58: Name Attribute Rules
The Object Type of a Managed Object (e.g., public
key, private key, symmetric key, etc.) SHALL be set by the server when the
object is created or registered and then SHALL NOT be changed or deleted before
the object is destroyed.
|
Object
|
Encoding
|
|
Object Type
|
Enumeration, see 9.1.3.2.12
|
Table 59: Object Type Attribute
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Create, Create Key Pair, Register, Derive Key,
Certify, Re-certify, Re-key, Re-key Key
Pair
|
|
Applies to Object Types
|
All Objects
|
Table
60: Object Type Attribute Rules
The Cryptographic Algorithm of an object. The Cryptographic
Algorithm of a Certificate object identifies the algorithm for the public key
contained within the Certificate. The digital signature algorithm used to sign
the Certificate is identified in the Digital Signature Algorithm attribute
defined in Section 3.16. This attribute SHALL be set by the server when the
object is created or registered and then SHALL NOT be changed or deleted before
the object is destroyed.
|
Object
|
Encoding
|
|
Cryptographic Algorithm
|
Enumeration, see 9.1.3.2.13
|
Table 61: Cryptographic Algorithm Attribute
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Certify, Create, Create Key Pair, Re-certify,
Register, Derive Key, Re-key, Re-key
Key Pair
|
|
Applies to Object Types
|
Keys, Certificates, Templates
|
Table
62: Cryptographic Algorithm Attribute Rules
For keys, Cryptographic Length is the length in
bits of the clear-text cryptographic key material of the Managed Cryptographic
Object. For certificates, Cryptographic Length is the length in bits of
the public key contained within the Certificate. This attribute SHALL be set by
the server when the object is created or registered, and then SHALL NOT be
changed or deleted before the object is destroyed.
|
Object
|
Encoding
|
|
Cryptographic Length
|
Integer
|
Table 63: Cryptographic Length Attribute
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Certify, Create, Create Key Pair, Re-certify,
Register, Derive Key, Re-key, Re-key
Key Pair
|
|
Applies to Object Types
|
Keys, Certificates, Templates
|
Table
64: Cryptographic Length Attribute Rules
The Cryptographic Parameters attribute is a
structure (see Table 65) that contains a set of OPTIONAL fields that describe
certain cryptographic parameters to be used when performing cryptographic
operations using the object. Specific fields MAY pertain only to certain types
of Managed Cryptographic Objects. The Cryptographic Parameters attribute of a
Certificate object identifies the cryptographic parameters of the public key
contained within the Certificate.
The Cryptographic Algorithm is also used to specify the
parameters for cryptographic operations. For operations involving digital
signatures, either the Digital Signature Algorithm can be specified or the
Cryptographic Algorithm and Hashing Algorithm combination can be specified.
Random IV can be used to request that the KMIP server
generate an appropriate IV for a cryptographic operation that uses an IV. The
generated Random IV is returned in the response to the cryptographic operation.
IV Length is the length of the Initialization Vector in
bits. This parameter SHALL be provided when the specified Block Cipher Mode
supports variable IV lengths such as CTR or GCM.
Tag Length is the length of the authentication tag in bytes.
This parameter SHALL be provided when the Block Cipher Mode is GCM or CCM.
The IV used with counter modes of operation (e.g., CTR and
GCM) cannot repeat for a given cryptographic key. To prevent an IV/key reuse,
the IV is often constructed of three parts: a fixed field, an invocation field,
and a counter as described in [SP800-38A] and [SP800-38D]. The Fixed Field Length is the length of the
fixed field portion of the IV in bits. The Invocation Field Length is the
length of the invocation field portion of the IV in bits. The Counter Length is
the length of the counter portion of the IV in bits.
Initial Counter Value is the starting counter value for
CTR mode (for [RFC3686] it is 1).
|
Object
|
Encoding
|
REQUIRED
|
|
Cryptographic Parameters
|
Structure
|
|
|
Block Cipher Mode
|
Enumeration, see 9.1.3.2.14
|
No
|
|
Padding Method
|
Enumeration, see 9.1.3.2.15
|
No
|
|
Hashing Algorithm
|
Enumeration, see 9.1.3.2.16
|
No
|
|
Key Role Type
|
Enumeration, see 9.1.3.2.17
|
No
|
|
Digital Signature
Algorithm
|
Enumeration, see
9.1.3.2.7
|
No
|
|
Cryptographic Algorithm
|
Enumeration, see
9.1.3.2.13
|
No
|
|
Random IV
|
Boolean
|
No
|
|
IV Length
|
Integer
|
No unless Block Cipher Mode supports variable IV
lengths
|
|
Tag Length
|
Integer
|
No unless Block Cipher Mode is GCM
|
|
Fixed Field Length
|
Integer
|
No
|
|
Invocation Field Length
|
Integer
|
No
|
|
Counter Length
|
Integer
|
No
|
|
Initial Counter Value
|
Integer
|
No
|
|
Salt Length
|
Integer
|
No (if omitted, defaults to the block size of the
Mask Generator Hashing Algorithm)
|
|
Mask Generator
|
Enumeration, see 9.1.3.2.49
|
No (if omitted defaults to MGF1).
|
|
Mask Generator Hashing
Algorithm
|
Enumeration, see 9.1.3.2.16
|
No. (if omitted defaults to SHA-1).
|
|
P Source
|
Byte String
|
No (if omitted, defaults to an empty byte string for
encoding input P in OAEP padding)
|
|
Trailer Field
|
Integer
|
No (if omitted, defaults to the standard one-byte
trailer in PSS padding)
|
Table
65: Cryptographic Parameters Attribute Structure
|
SHALL always have a value
|
No
|
|
Initially set by
|
Client
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
Yes
|
|
Deletable by client
|
Yes
|
|
Multiple instances permitted
|
Yes
|
|
When implicitly set
|
Re-key, Re-key
Key Pair, Re-certify
|
|
Applies to Object Types
|
Keys, Certificates, Templates
|
Table 66: Cryptographic Parameters Attribute Rules
Key Role Type definitions match those defined in ANSI X9
TR-31 [X9 TR-31] and are defined in Table 67:
|
BDK
|
Base Derivation Key (ANSI X9.24 DUKPT key
derivation)
|
|
CVK
|
Card Verification Key (CVV/signature strip number
validation)
|
|
DEK
|
Data Encryption Key (General Data Encryption)
|
|
MKAC
|
EMV/chip card Master Key: Application Cryptograms
|
|
MKSMC
|
EMV/chip card Master Key: Secure Messaging for
Confidentiality
|
|
MKSMI
|
EMV/chip card Master Key: Secure Messaging for
Integrity
|
|
MKDAC
|
EMV/chip card Master Key: Data Authentication Code
|
|
MKDN
|
EMV/chip card Master Key: Dynamic Numbers
|
|
MKCP
|
EMV/chip card Master Key: Card Personalization
|
|
MKOTH
|
EMV/chip card Master Key: Other
|
|
KEK
|
Key Encryption or Wrapping Key
|
|
MAC16609
|
ISO16609 MAC Algorithm 1
|
|
MAC97971
|
ISO9797-1 MAC Algorithm 1
|
|
MAC97972
|
ISO9797-1 MAC Algorithm 2
|
|
MAC97973
|
ISO9797-1 MAC Algorithm 3 (Note this is commonly
known as X9.19 Retail MAC)
|
|
MAC97974
|
ISO9797-1 MAC Algorithm 4
|
|
MAC97975
|
ISO9797-1 MAC Algorithm 5
|
|
ZPK
|
PIN Block Encryption Key
|
|
PVKIBM
|
PIN Verification Key, IBM 3624 Algorithm
|
|
PVKPVV
|
PIN Verification Key, VISA PVV Algorithm
|
|
PVKOTH
|
PIN Verification Key, Other Algorithm
|
Table 67: Key Role Types
Accredited Standards Committee X9, Inc. - Financial Industry
Standards (www.x9.org) contributed to Table 67. Key role names and descriptions
are derived from material in the Accredited Standards Committee X9, Inc.'s
Technical Report "TR-31 2010 Interoperable Secure Key Exchange Key Block
Specification for Symmetric Algorithms" and used with the permission of
Accredited Standards Committee X9, Inc. in an effort to improve
interoperability between X9 standards and OASIS KMIP. The complete ANSI X9
TR-31 is available at www.x9.org.
The Cryptographic Domain Parameters attribute is a
structure (see Table 68) that contains a set of OPTIONAL fields that MAY need
to be specified in the Create Key Pair Request Payload. Specific fields MAY
only pertain to certain types of Managed Cryptographic Objects.
The domain parameter Qlength correponds to the bit length
of parameter Q (refer to [SEC2] and [SP800-56A]). Qlength applies to algorithms such as DSA and DH. The
bit length of parameter P (refer to [SEC2] and [SP800-56A]) is specified separately by setting the
Cryptographic Length attribute.
Recommended Curve is applicable to elliptic curve
algorithms such as ECDSA, ECDH, and ECMQV.
|
Object
|
Encoding
|
Required
|
|
Cryptographic Domain Parameters
|
Structure
|
Yes
|
|
Qlength
|
Integer
|
No
|
|
Recommended Curve
|
Enumeration, see 9.1.3.2.5
|
No
|
Table
68: Cryptographic Domain Parameters Attribute Structure
|
Shall always have a value
|
No
|
|
Initially set by
|
Client
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Re-key, Re-key
Key Pair
|
|
Applies to Object Types
|
Asymmetric Keys, Templates
|
Table 69: Cryptographic Domain Parameters Attribute Rules
The Certificate Type attribute is a type of
certificate (e.g., X.509). The PGP certificate type is deprecated as of version
1.2 of this specification and MAY be removed from subsequent versions of the
specification.
The Certificate Type value SHALL be set by the
server when the certificate is created or registered and then SHALL NOT be
changed or deleted before the object is destroyed.
|
Object
|
Encoding
|
|
|
Certificate Type
|
Enumeration, see 9.1.3.2.6
|
|
Table 70: Certificate Type Attribute
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Register, Certify, Re-certify
|
|
Applies to Object Types
|
Certificates
|
Table 71: Certificate Type
Attribute Rules
The Certificate Length attribute is the length in
bytes of the Certificate object. The Certificate Length SHALL be set by
the server when the object is created or registered, and then SHALL NOT be
changed or deleted before the object is destroyed.
|
Object
|
Encoding
|
|
Certificate Length
|
Integer
|
Table 72: Certificate Length Attribute
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Register, Certify, Re-certify
|
|
Applies to Object Types
|
Certificates
|
Table 73: Certificate Length Attribute Rules
The X.509 Certificate Identifier attribute
is a structure (see Table 74) used to provide the
identification of an X.509 public key certificate. The X.509 Certificate
Identifier contains the Issuer Distinguished Name (i.e., from the Issuer field
of the X.509 certificate) and the Certificate Serial Number (i.e., from the
Serial Number field of the X.509 certificate). The X.509 Certificate
Identifier SHALL be set by the server when the X.509 certificate is created or
registered and then SHALL NOT be changed or deleted before the object is
destroyed.
|
Object
|
Encoding
|
REQUIRED
|
|
X.509 Certificate Identifier
|
Structure
|
|
|
Issuer Distinguished
Name
|
Byte String
|
Yes
|
|
Certificate Serial
Number
|
Byte String
|
Yes
|
Table 74: X.509 Certificate Identifier Attribute
Structure
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Register, Certify, Re-certify
|
|
Applies to Object Types
|
X.509 Certificates
|
Table 75: X.509 Certificate Identifier Attribute Rules
The X.509 Certificate Subject attribute is a
structure (see Table 76) used to identify the subject of a X.509 certificate.
The X.509 Certificate Subject contains the Subject Distinguished Name (i.e.,
from the Subject field of the X.509 certificate). It MAY include one or more
alternative names (e.g., email address, IP address, DNS name) for the subject
of the X.509 certificate (i.e., from the Subject Alternative Name extension
within the X.509 certificate). The X.509 Certificate Subject SHALL be set by
the server based on the information it extracts from the X.509 certificate that
is created (as a result of a Certify or a Re-certify operation) or registered
(as part of a Register operation) and SHALL NOT be changed or deleted before
the object is destroyed.
If the Subject Alternative Name extension is included in
the X.509 certificate and is marked critical within the X.509 certificate
itself, then an X.509 certificate MAY be issued with the subject field left
blank. Therefore an empty string is an acceptable value for the Subject
Distinguished Name.
|
Object
|
Encoding
|
REQUIRED
|
|
X.509 Certificate Subject
|
Structure
|
|
|
Subject
Distinguished Name
|
Byte String
|
Yes, but MAY be the empty
string
|
|
Subject Alternative
Name
|
Byte String
|
Yes, if the Subject Distinguished Name
is an empty string. MAY be repeated
|
Table 76: X.509 Certificate Subject Attribute Structure
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Register, Certify, Re-certify
|
|
Applies to Object Types
|
X.509 Certificates
|
Table 77: X.509 Certificate Subject Attribute Rules
The X.509 Certificate Issuer attribute is a
structure (see Table 82) used to identify the issuer of a X.509 certificate,
containing the Issuer Distinguished Name (i.e., from the Issuer field of the
X.509 certificate). It MAY include one or more alternative names (e.g., email
address, IP address, DNS name) for the issuer of the certificate (i.e., from
the Issuer Alternative Name extension within the X.509 certificate). The server
SHALL set these values based on the information it extracts from a X.509
certificate that is created as a result of a Certify or a Re-certify operation
or is sent as part of a Register operation. These values SHALL NOT be changed
or deleted before the object is destroyed.
|
Object
|
Encoding
|
REQUIRED
|
|
X.509 Certificate Issuer
|
Structure
|
|
|
Issuer
Distinguished Name
|
Byte String
|
Yes
|
|
Issuer
Alternative Name
|
Byte String
|
No, MAY be repeated
|
Table 78: X.509 Certificate Issuer Attribute Structure
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Register, Certify, Re-certify
|
|
Applies to Object Types
|
X.509 Certificates
|
Table 79: X.509 Certificate Issuer Attribute Rules
This attribute is deprecated as of version 1.1 of this
specification and MAY be removed from subsequent versions of this
specification. The X.509 Certificate Identifier attribute (see Section 3.10)
SHOULD be used instead.
The Certificate Identifier attribute is a structure
(see Table 80) used to provide the identification of a
certificate. For X.509 certificates, it contains the Issuer Distinguished Name
(i.e., from the Issuer field of the certificate) and the Certificate Serial
Number (i.e., from the Serial Number field of the certificate). For PGP
certificates, the Issuer contains the OpenPGP Key ID of the key issuing the
signature (the signature that represents the certificate). The Certificate Identifier
SHALL be set by the server when the certificate is created or registered and
then SHALL NOT be changed or deleted before the object is destroyed.
|
Object
|
Encoding
|
REQUIRED
|
|
Certificate Identifier
|
Structure
|
|
|
Issuer
|
Text String
|
Yes
|
|
Serial Number
|
Text String
|
Yes (for X.509 certificates) / No (for
PGP certificates since they do not contain a serial number)
|
Table 80: Certificate
Identifier Attribute Structure
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Register, Certify, Re-certify
|
|
Applies to Object Types
|
Certificates
|
Table
81: Certificate Identifier Attribute Rules
This attribute is deprecated as of version 1.1 of this
specification and MAY be removed from subsequent versions of this
specification. The X.509 Certificate Subject attribute (see Section 3.11)
SHOULD be used instead.
The Certificate Subject attribute is a structure
(see Table 82) used to identify the subject of a certificate. For X.509
certificates, it contains the Subject Distinguished Name (i.e., from the
Subject field of the certificate). It MAY include one or more alternative names
(e.g., email address, IP address, DNS name) for the subject of the certificate
(i.e., from the Subject Alternative Name extension within the certificate). For
PGP certificates, the Certificate Subject Distinguished Name contains the
content of the first User ID packet in the PGP certificate (that is, the first
User ID packet after the Public-Key packet in the transferable public key that
forms the PGP certificate). These values SHALL be set by the server based on
the information it extracts from the certificate that is created (as a result
of a Certify or a Re-certify operation) or registered (as part of a Register
operation) and SHALL NOT be changed or deleted before the object is destroyed.
If the Subject Alternative Name extension is included in
the certificate and is marked CRITICAL (i.e., within the certificate
itself), then it is possible to issue an X.509 certificate where the subject
field is left blank. Therefore an empty string is an acceptable value for the
Certificate Subject Distinguished Name.
|
Object
|
Encoding
|
REQUIRED
|
|
Certificate Subject
|
Structure
|
|
|
Certificate
Subject Distinguished Name
|
Text String
|
Yes, but MAY be the empty string
|
|
Certificate
Subject Alternative Name
|
Text String
|
No, MAY be repeated
|
Table 82: Certificate Subject Attribute Structure
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Register, Certify, Re-certify
|
|
Applies to Object Types
|
Certificates
|
Table
83: Certificate Subject Attribute Rules
This attribute is deprecated as of version 1.1 of this
specification and MAY be removed from subsequent versions of this
specification. The X.509 Certificate Issuer attribute (see Section 3.12) SHOULD
be used instead.
The Certificate Issuer attribute is a structure
(see Table 85) used to identify the issuer of a certificate, containing the
Issuer Distinguished Name (i.e., from the Issuer field of the certificate). It
MAY include one or more alternative names (e.g., email address, IP address, DNS
name) for the issuer of the certificate (i.e., from the Issuer Alternative Name
extension within the certificate). The server SHALL set these values based on
the information it extracts from a certificate that is created as a result of a
Certify or a Re-certify operation or is sent as part of a Register operation.
These values SHALL NOT be changed or deleted before the object is destroyed.
|
Object
|
Encoding
|
REQUIRED
|
|
Certificate Issuer
|
Structure
|
|
|
Certificate
Issuer Distinguished Name
|
Text String
|
Yes
|
|
Certificate
Issuer Alternative Name
|
Text String
|
No, MAY be repeated
|
Table 84: Certificate Issuer Attribute Structure
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Register, Certify, Re-certify
|
|
Applies to Object Types
|
Certificates
|
Table 85: Certificate Issuer Attribute Rules
The Digital Signature Algorithm attribute
identifies the digital signature algorithm associated with a digitally signed
object (e.g., Certificate). This attribute SHALL be set by the server when the
object is created or registered and then SHALL NOT be changed or deleted before
the object is destroyed.
|
Object
|
Encoding
|
|
Digital Signature Algorithm
|
Enumeration, see 9.1.3.2.7
|
Table 86: Digital Signature Algorithm Attribute
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
Yes for PGP keys. No for X.509 certificates.
|
|
When implicitly set
|
Certify, Re-certify, Register
|
|
Applies to Object Types
|
Certificates, PGP keys
|
Table 87: Digital Signature Algorithm Attribute Rules
The Digest attribute is a structure (see Table 88) that contains the digest value of the key or secret data (i.e., digest of
the Key Material), certificate (i.e., digest of the Certificate Value), or
opaque object (i.e., digest of the Opaque Data Value). If the Key Material is a
Byte String, then the Digest Value SHALL be calculated on this Byte String. If
the Key Material is a structure, then the Digest Value SHALL be calculated on
the TTLV-encoded (see Section 9.1) Key Material structure. The Key Format Type
field in the Digest attribute indicates the format of the Managed Object from
which the Digest Value was calculated. Multiple digests MAY be calculated using
different algorithms listed in Section 9.1.3.2.16 and/or key format types
listed in Section 9.1.3.2.3. If this attribute exists, then it SHALL have a
mandatory attribute instance computed with the SHA-256 hashing algorithm. For
objects registered by a client, the server SHALL compute the digest of the
mandatory attribute instance using the Key Format Type of the registered object.
In all other cases, the server MAY use any Key Format Type when computing the
digest of the mandatory attribute instance, provided it is able to serve the
object to clients in that same format. The digest(s) are static and SHALL be
set by the server when the object is created or registered, provided that the
server has access to the Key Material or the Digest Value (possibly obtained
via out-of-band mechanisms).
|
Object
|
Encoding
|
REQUIRED
|
|
Digest
|
Structure
|
|
|
Hashing Algorithm
|
Enumeration, see 9.1.3.2.16
|
Yes
|
|
Digest Value
|
Byte String
|
Yes, if the server has access to the Digest Value or
the Key Material (for keys and secret data), the Certificate Value (for
certificates) or the Opaque Data Value (for opaque objects).
|
|
Key Format Type
|
Enumeration, see 9.1.3.2.3
|
Yes, if the Managed Object is a key or secret data
object.
|
Table
88: Digest Attribute Structure
|
SHALL always have a value
|
Yes, if the server has access to the Digest Value or
the Key Material (for keys and secret data), the Certificate Value (for
certificates) or the Opaque Data Value (for opaque objects).
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
Yes
|
|
When implicitly set
|
Create, Create Key Pair, Register, Derive Key,
Certify, Re-certify, Re-key, Re-key Key
Pair
|
|
Applies to Object Types
|
All Cryptographic Objects, Opaque Objects
|
Table
89: Digest Attribute Rules
The Operation Policy Name Attribute is deprecated
as of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification.
An operation policy controls what entities MAY perform
which key management operations on the object. The content of the Operation
Policy Name attribute is the name of a policy object known to the key
management system and, therefore, is server dependent. The named policy objects
are created and managed using mechanisms outside the scope of the protocol. The
policies determine what entities MAY perform specified operations on the
object, and which of the object’s attributes MAY be modified or deleted. The
Operation Policy Name attribute SHOULD be set when operations that result in a
new Managed Object on the server are executed. It is set either explicitly or
via some default set by the server, which then applies the named policy to all
subsequent operations on the object.
|
Object
|
Encoding
|
|
Operation Policy Name
|
Text String
|
Table 90: Operation Policy Name Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Server or Client
|
|
Modifiable by server
|
Yes
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Create, Create Key Pair, Register, Derive Key,
Certify, Re-certify, Re-key, Re-key Key
Pair
|
|
Applies to Object Types
|
All Objects
|
Table
91: Operation Policy Name Attribute Rules
Some of the operations SHOULD be allowed for any client at
any time, without respect to operation policy. These operations are:
·
Create
·
Create Key Pair
·
Register
·
Certify
·
Re-certify
·
Validate
·
Query
·
Cancel
·
Poll
3.18.2
Default Operation Policy
A key management system
implementation MAY implement a named operation policy, which is used for
objects when the Operation Policy attribute is not specified by the
Client in operations that result in a new Managed Object on the server, or in a
template specified in these operations. This policy is named default. It
specifies the following rules for operations on objects created or registered
with this policy, depending on the object type.
This policy applies to Symmetric
Keys, Private Keys, Split Keys, Secret Data, and Opaque Objects.
The Default Operation Policy for Template Objects is deprecated
as of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification.
|
Default
Operation Policy for Secret Objects
|
|
Operation
|
Policy
|
|
Re-key
|
Allowed to owner only
|
|
Re-key Key Pair
|
Allowed to owner only
|
|
Derive Key
|
Allowed to owner only
|
|
Locate
|
Allowed to owner only
|
|
Check
|
Allowed to owner only
|
|
Get
|
Allowed to owner only
|
|
Get Attributes
|
Allowed to owner only
|
|
Get Attribute List
|
Allowed to owner only
|
|
Add Attribute
|
Allowed to owner only
|
|
Modify Attribute
|
Allowed to owner only
|
|
Delete Attribute
|
Allowed to owner only
|
|
Obtain Lease
|
Allowed to owner only
|
|
Get Usage Allocation
|
Allowed to owner only
|
|
Activate
|
Allowed to owner only
|
|
Revoke
|
Allowed to owner only
|
|
Destroy
|
Allowed to owner only
|
|
Archive
|
Allowed to owner only
|
|
Recover
|
Allowed to owner only
|
Table 92: Default Operation Policy for Secret Objects
3.18.2.2
Default Operation Policy for Certificates and Public Key Objects
This policy applies to
Certificates and Public Keys.
The Default Operation Policy for Template Objects is
deprecated as of version 1.3 of this specification and MAY be removed from
subsequent versions of the specification.
|
Default
Operation Policy for Certificates and Public Key Objects
|
|
Operation
|
Policy
|
|
Locate
|
Allowed to all
|
|
Check
|
Allowed to all
|
|
Get
|
Allowed to all
|
|
Get Attributes
|
Allowed to all
|
|
Get Attribute List
|
Allowed to all
|
|
Add Attribute
|
Allowed to owner only
|
|
Modify Attribute
|
Allowed to owner only
|
|
Delete Attribute
|
Allowed to owner only
|
|
Obtain Lease
|
Allowed to all
|
|
Activate
|
Allowed to owner only
|
|
Revoke
|
Allowed to owner only
|
|
Destroy
|
Allowed to owner only
|
|
Archive
|
Allowed to owner only
|
|
Recover
|
Allowed to owner only
|
Table
93: Default Operation Policy for Certificates and Public Key Objects
The Default Operation Policy for Template Objects is
deprecated as of version 1.3 of this specification and MAY be removed from
subsequent versions of the specification.
The operation policy specified as
an attribute in the Register operation for a template object is the
operation policy used for objects created using that template, and is not the
policy used to control operations on the template itself. There is no mechanism
to specify a policy used to control operations on template objects, so the
default policy for template objects is always used for templates created by
clients using the Register operation to create template objects.
|
Default
Operation Policy for Private Template Objects
|
|
Operation
|
Policy
|
|
Locate
|
Allowed to owner only
|
|
Get
|
Allowed to owner only
|
|
Get Attributes
|
Allowed to owner only
|
|
Get Attribute List
|
Allowed to owner only
|
|
Add Attribute
|
Allowed to owner only
|
|
Modify Attribute
|
Allowed to owner only
|
|
Delete Attribute
|
Allowed to owner only
|
|
Destroy
|
Allowed to owner only
|
|
Any operation referencing the Template using a Template-Attribute
|
Allowed to owner only
|
Table 94: Default Operation Policy for Private Template Objects
In addition to private template
objects (which are controlled by the above policy, and which MAY be created by
clients or the server), publicly known and usable templates MAY be created and
managed by the server, with a default policy different from private template
objects.
|
Default
Operation Policy for Public Template Objects
|
|
Operation
|
Policy
|
|
Locate
|
Allowed to all
|
|
Get
|
Allowed to all
|
|
Get Attributes
|
Allowed to all
|
|
Get Attribute List
|
Allowed to all
|
|
Add Attribute
|
Disallowed to all
|
|
Modify Attribute
|
Disallowed to all
|
|
Delete Attribute
|
Disallowed to all
|
|
Destroy
|
Disallowed to all
|
|
Any operation referencing the Template using a Template-Attribute
|
Allowed to all
|
Table
95: Default Operation Policy for Public Template Objects
The Cryptographic Usage Mask attribute defines the
cryptographic usage of a key. This is a bit mask that indicates to the client
which cryptographic functions MAY be performed using the key, and which ones
SHALL NOT be performed.
·
Sign
·
Verify
·
Encrypt
·
Decrypt
·
Wrap Key
·
Unwrap Key
·
Export
·
MAC Generate
·
MAC Verify
·
Derive Key
·
Content Commitment
·
Key Agreement
·
Certificate Sign
·
CRL Sign
·
Generate Cryptogram
·
Validate Cryptogram
·
Translate Encrypt
·
Translate Decrypt
·
Translate Wrap
·
Translate Unwrap
This list takes into
consideration values that MAY appear in the Key Usage extension in an X.509
certificate. However, the list does not consider the additional usages that MAY
appear in the Extended Key Usage extension.
X.509 Key Usage values SHALL be mapped to Cryptographic
Usage Mask values in the following manner:
|
X.509
Key Usage to Cryptographic Usage Mask Mapping
|
|
X.509 Key Usage Value
|
Cryptographic Usage Mask Value
|
|
digitalSignature
|
Sign or Verify
|
|
contentCommitment
|
Content Commitment
(Non Repudiation)
|
|
keyEncipherment
|
Wrap Key or Unwrap Key
|
|
dataEncipherment
|
Encrypt or Decrypt
|
|
keyAgreement
|
Key Agreement
|
|
keyCertSign
|
Certificate Sign
|
|
cRLSign
|
CRL Sign
|
|
encipherOnly
|
Encrypt
|
|
decipherOnly
|
Decrypt
|
Table 96: X.509 Key Usage to Cryptographic Usage Mask Mapping
|
Object
|
Encoding
|
|
Cryptographic Usage Mask
|
Integer
|
Table 97: Cryptographic Usage Mask Attribute
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Server or Client
|
|
Modifiable by server
|
Yes
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Create, Create Key Pair, Register, Derive Key,
Certify, Re-certify, Re-key, Re-key Key
Pair
|
|
Applies to Object Types
|
All Cryptographic Objects, Templates
|
Table
98: Cryptographic Usage Mask Attribute Rules
The Lease Time attribute defines a time interval
for a Managed Cryptographic Object beyond which the client SHALL NOT use the
object without obtaining another lease. This attribute always holds the initial
length of time allowed for a lease, and not the actual remaining time. Once its
lease expires, the client is only able to renew the lease by calling Obtain
Lease. A server SHALL store in this attribute the maximum Lease Time it is able
to serve and a client obtains the lease time (with Obtain Lease) that is less
than or equal to the maximum Lease Time. This attribute is read-only for
clients. It SHALL be modified by the server only.
|
Object
|
Encoding
|
|
Lease Time
|
Interval
|
Table 99: Lease Time Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
Yes
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Create, Create Key Pair, Register, Derive Key,
Certify, Re-certify, Re-key, Re-key Key
Pair
|
|
Applies to Object Types
|
All Cryptographic Objects
|
Table
100: Lease Time Attribute Rules
The Usage Limits attribute is a mechanism for
limiting the usage of a Managed Cryptographic Object. It only applies to
Managed Cryptographic Objects that are able to be used for applying
cryptographic protection and it SHALL only reflect their usage for applying
that protection (e.g., encryption, signing, etc.). This attribute does not
necessarily exist for all Managed Cryptographic Objects, since some objects are
able to be used without limit for cryptographically protecting data, depending
on client/server policies. Usage for processing cryptographically protected
data (e.g., decryption, verification, etc.) is not limited. The Usage Limits
attribute has the three following fields:
·
Usage Limits Total – the total number of Usage Limits
Units allowed to be protected. This is the total value for the entire life of
the object and SHALL NOT be changed once the object begins to be used for
applying cryptographic protection.
·
Usage Limits Count – the currently remaining number of
Usage Limits Units allowed to be protected by the object.
·
Usage Limits Unit – The type of quantity for which this
structure specifies a usage limit (e.g., byte, object).
When the attribute is initially set (usually during object
creation or registration), the Usage Limits Count is set to the Usage Limits
Total value allowed for the useful life of the object, and are decremented when
the object is used. The server SHALL ignore the Usage Limits Count value if the
attribute is specified in an operation that creates a new object. Changes made
via the Modify Attribute operation reflect corrections to the Usage Limits
Total value, but they SHALL NOT be changed once the Usage Limits Count value
has changed by a Get Usage Allocation operation. The Usage Limits Count value
SHALL NOT be set or modified by the client via the Add Attribute or Modify
Attribute operations.
|
Object
|
Encoding
|
REQUIRED
|
|
Usage Limits
|
Structure
|
|
|
Usage Limits Total
|
Long Integer
|
Yes
|
|
Usage Limits Count
|
Long Integer
|
Yes
|
|
Usage Limits Unit
|
Enumeration, see 9.1.3.2.31
|
Yes
|
Table 101: Usage Limits Attribute Structure
|
SHALL always have a value
|
No
|
|
Initially set by
|
Server (Total, Count, and Unit) or Client (Total
and/or Unit only)
|
|
Modifiable by server
|
Yes
|
|
Modifiable by client
|
Yes (Total and/or Unit only, as long as Get Usage
Allocation has not been performed)
|
|
Deletable by client
|
Yes, as long as Get Usage Allocation has not been
performed
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Create, Create Key Pair, Register, Derive Key,
Re-key, Re-key Key Pair, Get Usage Allocation
|
|
Applies to Object Types
|
Keys, Templates
|
Table 102: Usage Limits Attribute Rules
3.22
State
This attribute is
an indication of the State of an object as known to the key management
server. The State SHALL NOT be changed by using the Modify Attribute operation
on this attribute. The State SHALL only be changed by the server as a part of
other operations or other server processes. An object SHALL be in one of the
following states at any given time. (Note: These states correspond to those
described in [SP800-57-1]).
·
Pre-Active: The object exists and SHALL NOT be used for
any cryptographic purpose.
·
Active: The object SHALL be transitioned to
the Active state prior to being used for any cryptographic purpose. The
object SHALL only be used for all cryptographic purposes that are allowed by
its Cryptographic Usage Mask attribute. If a Process Start Date (see 3.25) attribute is set, then the object SHALL NOT be used for cryptographic purposes
prior to the Process Start Date. If a Protect Stop Date (see 3.26) attribute is set, then the object SHALL NOT be used for cryptographic purposes after the
Process Stop Date.
·
Deactivated: The object SHALL NOT be used for applying
cryptographic protection (e.g., encryption, signing, wrapping, MACing,
deriving) . The object SHALL only be used for cryptographic purposes permitted
by the Cryptographic Usage Mask attribute. The object SHOULD only be used to
process cryptographically-protected information (e.g., decryption, signature
verification, unwrapping, MAC verification under extraordinary circumstances
and when special permission is granted.
·
Compromised: The object SHALL NOT be used for applying cryptographic
protection (e.g., encryption, signing, wrapping, MACing, deriving). The object
SHOULD only be used to process cryptographically-protected information (e.g.,
decryption, signature verification, unwrapping, MAC verification in a client
that is trusted to use managed objects that have been compromised. The object
SHALL only be used for cryptographic purposes permitted by the Cryptographic
Usage Mask attribute.
·
Destroyed: The object SHALL NOT be used for any
cryptographic purpose.
·
Destroyed Compromised: The object SHALL NOT be used for
any cryptographic purpose; however its compromised status SHOULD be retained
for audit or security purposes.
State transitions occur as follows:
1. The
transition from a non-existent key to the Pre-Active state is caused by the
creation of the object. When an object is created or registered, it
automatically goes from non-existent to Pre-Active. If, however, the operation
that creates or registers the object contains an Activation Date that has
already occurred, then the state immediately transitions from Pre-Active to
Active. In this case, the server SHALL set the Activation Date attribute to the
value specified in the request, or fail the request attempting to create or
register the object, depending on server policy. If the operation contains an
Activation Date attribute that is in the future, or contains no Activation
Date, then the Cryptographic Object is initialized in the key management system
in the Pre-Active state.
2. The
transition from Pre-Active to Destroyed is caused by a client issuing a Destroy
operation. The server destroys the object when (and if) server policy dictates.
3. The
transition from Pre-Active to Compromised is caused by a client issuing a
Revoke operation with a Revocation Reason of Compromised.
4. The
transition from Pre-Active to Active SHALL occur in one of three ways:
·
The Activation Date is reached,
·
A client successfully issues a Modify Attribute operation,
modifying the Activation Date to a date in the past, or the current date, or
·
A client issues an Activate operation on the object. The server
SHALL set the Activation Date to the time the Activate operation is received.
5. The
transition from Active to Compromised is caused by a client issuing a Revoke
operation with a Revocation Reason of Compromised.
6. The
transition from Active to Deactivated SHALL occur in one of three ways:
·
The object's Deactivation Date is reached,
·
A client issues a Revoke operation, with a Revocation Reason
other than Compromised, or
·
The client successfully issues a Modify Attribute operation,
modifying the Deactivation Date to a date in the past, or the current date.
7. The
transition from Deactivated to Destroyed is caused by a client issuing a
Destroy operation, or by a server, both in accordance with server policy. The
server destroys the object when (and if) server policy dictates.
8. The
transition from Deactivated to Compromised is caused by a client issuing a
Revoke operation with a Revocation Reason of Compromised.
9. The
transition from Compromised to Destroyed Compromised is caused by a client
issuing a Destroy operation, or by a server, both in accordance with server
policy. The server destroys the object when (and if) server policy dictates.
10. The transition from
Destroyed to Destroyed Compromised is caused by a client issuing a Revoke
operation with a Revocation Reason of Compromised.
Only the transitions described
above are permitted.
|
Object
|
Encoding
|
|
State
|
Enumeration, see 9.1.3.2.18
|
Table 103: State Attribute
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
Yes
|
|
Modifiable by client
|
No, but only by the server in response to certain
requests (see above)
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Create, Create Key Pair, Register, Derive Key,
Activate, Revoke, Destroy, Certify, Re-certify, Re-key, Re-key Key Pair
|
|
Applies to Object Types
|
All Cryptographic Objects
|
Table
104: State Attribute Rules
The Initial Date attribute contains the date and
time when the Managed Object was first created or registered at the server.
This time corresponds to state transition 1 (see Section 3.22). This attribute SHALL be set by the server when the object is created or registered, and then
SHALL NOT be changed or deleted before the object is destroyed. This attribute
is also set for non-cryptographic objects (e.g., templates) when they are first
registered with the server.
|
Object
|
Encoding
|
|
Initial Date
|
Date-Time
|
Table 105: Initial Date Attribute
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Create, Create Key Pair, Register, Derive Key,
Certify, Re-certify, Re-key, Re-key Key Pair
|
|
Applies to Object Types
|
All Objects
|
Table
106: Initial Date Attribute Rules
The Activation Date attribute contains the date and
time when the Managed Cryptographic Object MAY begin to be used. This time
corresponds to state transition 4 (see Section 3.22). The object SHALL NOT be
used for any cryptographic purpose before the Activation Date has been
reached. Once the state transition from Pre-Active has occurred, then this
attribute SHALL NOT be changed or deleted before the object is destroyed.
|
Object
|
Encoding
|
|
Activation Date
|
Date-Time
|
Table 107: Activation Date Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Server or Client
|
|
Modifiable by server
|
Yes, only while in Pre-Active state
|
|
Modifiable by client
|
Yes, only while in Pre-Active state
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Create, Create Key Pair, Register, Derive Key,
Activate Certify, Re-certify, Re-key, Re-key Key Pair
|
|
Applies to Object Types
|
All Cryptographic Objects, Templates
|
Table
108: Activation Date Attribute Rules
The Process Start Date attribute is the date and
time when a Managed Symmetric Key Object MAY begin to be used to process
cryptographically protected information (e.g., decryption or unwrapping),
depending on the value of its Cryptographic Usage Mask attribute. The object
SHALL NOT be used for these cryptographic purposes before the Process Start
Date has been reached. This value MAY be equal to or later than, but SHALL
NOT precede, the Activation Date. Once the Process Start Date has occurred,
then this attribute SHALL NOT be changed or deleted before the object is
destroyed.
|
Object
|
Encoding
|
|
Process Start Date
|
Date-Time
|
Table 109: Process Start Date Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Server or Client
|
|
Modifiable by server
|
Yes, only while in Pre-Active or Active state and as
long as the Process Start Date has been not reached.
|
|
Modifiable by client
|
Yes, only while in Pre-Active or Active state and as
long as the Process Start Date has been not reached.
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Create, Register, Derive Key, Re-key
|
|
Applies to Object Types
|
Symmetric Keys, Split Keys of symmetric keys,
Templates
|
Table
110: Process Start Date Attribute Rules
The Protect Stop Date attribute is the date and
time after which a Managed Symmetric Key Object SHALL NOT be used for applying cryptographic
protection (e.g., encryption or wrapping), depending on the value of its
Cryptographic Usage Mask attribute. This value MAY be equal to or earlier than,
but SHALL NOT be later than the Deactivation Date. Once the Protect Stop
Date has occurred, then this attribute SHALL NOT be changed or deleted
before the object is destroyed.
|
Object
|
Encoding
|
|
Protect Stop Date
|
Date-Time
|
Table 111: Protect Stop Date Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Server or Client
|
|
Modifiable by server
|
Yes, only while in Pre-Active or Active state and as
long as the Protect Stop Date has not been reached.
|
|
Modifiable by client
|
Yes, only while in Pre-Active or Active state and as
long as the Protect Stop Date has not been reached.
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Create, Register, Derive Key, Re-key
|
|
Applies to Object Types
|
Symmetric Keys, Split Keys of symmetric keys,
Templates
|
Table
112: Protect Stop Date Attribute Rules
The Deactivation Date attribute is the date and
time when the Managed Cryptographic Object SHALL NOT be used for any purpose,
except for decryption, signature verification, or unwrapping, but only under
extraordinary circumstances and only when special permission is granted. This
time corresponds to state transition 6 (see Section 3.22). This attribute SHALL
NOT be changed or deleted before the object is destroyed, unless the object is
in the Pre-Active or Active state.
|
Object
|
Encoding
|
|
Deactivation Date
|
Date-Time
|
Table 113: Deactivation Date Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Server or Client
|
|
Modifiable by server
|
Yes, only while in Pre-Active or Active state
|
|
Modifiable by client
|
Yes, only while in Pre-Active or Active state
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Create, Create Key Pair, Register, Derive Key,
Revoke Certify, Re-certify, Re-key, Re-key Key Pair
|
|
Applies to Object Types
|
All Cryptographic Objects, Templates
|
Table
114: Deactivation Date Attribute Rules
The Destroy Date attribute is the date and time
when the Managed Object was destroyed. This time corresponds to state
transitions 2, 7, or 9 (see Section 3.22). This value is set by the server when
the object is destroyed due to the reception of a Destroy operation, or due to
server policy or out-of-band administrative action.
|
Object
|
Encoding
|
|
Destroy Date
|
Date-Time
|
Table 115: Destroy Date Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Destroy
|
|
Applies to Object Types
|
All Cryptographic Objects, Opaque Objects
|
Table 116: Destroy Date Attribute Rules
The Compromise Occurrence Date attribute is the
date and time when the Managed Cryptographic Object was first believed to be
compromised. If it is not possible to estimate when the compromise occurred,
then this value SHOULD be set to the Initial Date for the object.
|
Object
|
Encoding
|
|
Compromise Occurrence Date
|
Date-Time
|
Table 117: Compromise Occurrence Date Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Revoke
|
|
Applies to Object Types
|
All Cryptographic Objects, Opaque Object
|
Table
118: Compromise Occurrence Date Attribute Rules
The Compromise Date attribute contains the date and
time when the Managed Cryptographic Object entered into the compromised state.
This time corresponds to state transitions 3, 5, 8, or 10 (see Section 3.22). This time indicates when the key management system was made aware of the
compromise, not necessarily when the compromise occurred. This attribute is set
by the server when it receives a Revoke operation with a Revocation Reason
of Compromised code, or due to server policy or out-of-band administrative
action.
|
Object
|
Encoding
|
|
Compromise Date
|
Date-Time
|
Table 119: Compromise Date Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Revoke
|
|
Applies to Object Types
|
All Cryptographic Objects, Opaque Object
|
Table
120: Compromise Date Attribute Rules
The Revocation Reason attribute is a structure (see
Table 121) used to indicate why the Managed Cryptographic Object was revoked
(e.g., “compromised”, “expired”, “no longer used”, etc.). This attribute is
only set by the server as a part of the Revoke Operation.
The Revocation Message is an OPTIONAL field that is
used exclusively for audit trail/logging purposes and MAY contain additional
information about why the object was revoked (e.g., “Laptop stolen”, or
“Machine decommissioned”).
|
Object
|
Encoding
|
REQUIRED
|
|
Revocation Reason
|
Structure
|
|
|
Revocation Reason Code
|
Enumeration, see 9.1.3.2.19
|
Yes
|
|
Revocation Message
|
Text String
|
No
|
Table
121: Revocation Reason Attribute Structure
|
SHALL always have a value
|
No
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
Yes
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Revoke
|
|
Applies to Object Types
|
All Cryptographic Objects, Opaque Object
|
Table
122: Revocation Reason Attribute Rules
The Archive Date attribute is the date and time
when the Managed Object was placed in archival storage. This value is set by
the server as a part of the Archive operation. The server SHALL delete this
attribute whenever a Recover operation is performed.
|
Object
|
Encoding
|
|
Archive Date
|
Date-Time
|
Table 123: Archive Date Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Archive
|
|
Applies to Object Types
|
All Objects
|
Table 124: Archive Date Attribute Rules
An object MAY be part of a group of objects. An object MAY
belong to more than one group of objects. To assign an object to a group of
objects, the object group name SHOULD be set into this attribute. “default” is
a reserved Text String for Object Group.
|
Object
|
Encoding
|
|
Object Group
|
Text String
|
Table 125: Object Group Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Client or Server
|
|
Modifiable by server
|
Yes
|
|
Modifiable by client
|
Yes
|
|
Deletable by client
|
Yes
|
|
Multiple instances permitted
|
Yes
|
|
When implicitly set
|
Create, Create Key Pair, Register, Derive Key,
Certify, Re-certify, Re-key, Re-key Key
Pair
|
|
Applies to Object Types
|
All Objects
|
Table
126: Object Group Attribute Rules
The Fresh attribute is a Boolean attribute that
indicates that the object has not yet been served to a client. The Fresh
attribute SHALL be set to True when a new object is created on the server. The
server SHALL change the attribute value to False as soon as the object has been
served to a client.
|
Object
|
Encoding
|
|
Fresh
|
Boolean
|
Table 127: Fresh Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Client or Server
|
|
Modifiable by server
|
Yes
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Create, Create Key Pair, Register, Derive Key,
Certify, Re-certify, Re-key, Re-key Key Pair, Re-key Key Pair
|
|
Applies to Object Types
|
All Cryptographic Objects
|
Table 128: Fresh Attribute Rules
The Link attribute is a structure (see Table 129) used to create a link from one Managed Cryptographic Object to another,
closely related target Managed Cryptographic Object. The link has a type, and
the allowed types differ, depending on the Object Type of the Managed
Cryptographic Object, as listed below. The Linked Object Identifier
identifies the target Managed Cryptographic Object by its Unique Identifier.
The link contains information about the association between the Managed
Cryptographic Objects (e.g., the private key corresponding to a public key; the
parent certificate for a certificate in a chain; or for a derived symmetric
key, the base key from which it was derived).
Possible values of Link Type in accordance with the
Object Type of the Managed Cryptographic Object are:
·
Private Key Link: For a Public Key object: the private
key corresponding to the public key.
·
Public Key Link: For a Private Key object: the public key
corresponding to the private key. For a Certificate object: the public key
contained in the certificate.
·
Certificate Link: For Certificate objects: the parent
certificate for a certificate in a certificate chain. For Public Key objects: the
corresponding certificate(s), containing the same public key.
·
Derivation Base Object Link: For a derived Symmetric Key
or Secret Data object: the object(s) from which the current symmetric key was
derived.
·
Derived Key Link: the symmetric key(s) or Secret Data
object(s) that were derived from the current object.
·
Replacement Object Link: For a Symmetric Key, an
Asymmetric Private Key, or an Asymmetric Public Key object: the key that
resulted from the re-key of the current key. For a Certificate object: the
certificate that resulted from the re-certify. Note that there SHALL be only
one such replacement object per Managed Object.
·
Replaced Object Link: For a Symmetric Key, an
Asymmetric Private Key, or an Asymmetric Public Key object: the key that was
re-keyed to obtain the current key. For a Certificate object: the certificate
that was re-certified to obtain the current certificate.
·
Parent Link: For all object types: the owner, container or
other parent object corresponding to the object.
·
Child Link: For all object types: the subordinate, derived
or other child object corresponding to the object.
·
Previous Link: For all object types: the previous object
to this object.
·
Next Link: For all object types: the next object to this object.
The Link attribute SHOULD be present for private keys and
public keys for which a certificate chain is stored by the server, and for
certificates in a certificate chain.
Note that it is possible for a Managed Object to have
multiple instances of the Link attribute (e.g., a Private Key has links to the
associated certificate, as well as the associated public key; a Certificate
object has links to both the public key and to the certificate of the
certification authority (CA) that signed the certificate).
It is also possible that a Managed Object does not have
links to associated cryptographic objects. This MAY occur in cases where the
associated key material is not available to the server or client (e.g., the
registration of a CA Signer certificate with a server, where the corresponding
private key is held in a different manner).
|
Object
|
Encoding
|
REQUIRED
|
|
Link
|
Structure
|
|
|
Link Type
|
Enumeration, see 9.1.3.2.20
|
Yes
|
|
Linked Object
Identifier, see 3.1
|
Text String
|
Yes
|
Table
129: Link Attribute Structure
|
SHALL always have a value
|
No
|
|
Initially set by
|
Client or Server
|
|
Modifiable by server
|
Yes
|
|
Modifiable by client
|
Yes
|
|
Deletable by client
|
Yes
|
|
Multiple instances permitted
|
Yes
|
|
When implicitly set
|
Create Key Pair, Derive Key, Certify, Re-certify,
Re-key, Re-key Key Pair
|
|
Applies to Object Types
|
All Cryptographic Objects
|
Table 130: Link Attribute Structure Rules
The Application Specific Information attribute is a
structure (see Table 131) used to store data specific to the application(s)
using the Managed Object. It consists of the following fields: an Application
Namespace and Application Data specific to that application
namespace.
Clients MAY request to set (i.e., using any of the
operations that result in new Managed Object(s) on the server or
adding/modifying the attribute of an existing Managed Object) an instance of
this attribute with a particular Application Namespace while omitting Application
Data. In that case, if the server supports this namespace (as indicated by
the Query operation in Section 4.25), then it SHALL return a suitable Application
Data value. If the server does not support this namespace, then an error
SHALL be returned.
|
Object
|
Encoding
|
REQUIRED
|
|
Application Specific Information
|
Structure
|
|
|
Application Namespace
|
Text String
|
Yes
|
|
Application Data
|
Text String
|
No
|
Table
131: Application Specific Information Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Client or Server (only if the Application Data is
omitted, in the client request)
|
|
Modifiable by server
|
Yes (only if the Application Data is omitted in the
client request)
|
|
Modifiable by client
|
Yes
|
|
Deletable by client
|
Yes
|
|
Multiple instances permitted
|
Yes
|
|
When implicitly set
|
Re-key, Re-key
Key Pair, Re-certify
|
|
Applies to Object Types
|
All Objects
|
Table
132: Application Specific Information Attribute Rules
The Contact Information attribute is OPTIONAL, and
its content is used for contact purposes only. It is not used for policy
enforcement. The attribute is set by the client or the server.
|
Object
|
Encoding
|
|
Contact Information
|
Text String
|
Table 133: Contact Information Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Client or Server
|
|
Modifiable by server
|
Yes
|
|
Modifiable by client
|
Yes
|
|
Deletable by client
|
Yes
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Create, Create Key Pair, Register, Derive Key, Certify, Re-certify,
Re-key, Re-key Key Pair
|
|
Applies to Object Types
|
All Objects
|
Table
134: Contact Information Attribute Rules
The Last Change Date attribute contains the date
and time of the last change of the specified object.
|
Object
|
Encoding
|
|
Last Change Date
|
Date-Time
|
Table 135: Last Change Date Attribute
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
Yes
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Create, Create Key Pair, Register, Derive Key,
Activate, Revoke, Destroy, Archive, Recover, Certify, Re-certify, Re-key, Re-key Key Pair,
Add Attribute, Modify Attribute, Delete Attribute, Get Usage Allocation
|
|
Applies to Object Types
|
All Objects
|
Table
136: Last Change Date Attribute Rules
A Custom Attribute is a client- or server-defined
attribute intended for vendor-specific purposes. It is created by the client
and not interpreted by the server, or is created by the server and MAY be
interpreted by the client. All custom attributes created by the client SHALL
adhere to a naming scheme, where the name of the attribute SHALL have a prefix
of 'x-'. All custom attributes created by the key management server SHALL
adhere to a naming scheme where the name of the attribute SHALL have a prefix
of 'y-'. The server SHALL NOT accept a client-created or modified attribute,
where the name of the attribute has a prefix of ‘y-‘. The tag type Custom
Attribute is not able to identify the particular attribute; hence such an
attribute SHALL only appear in an Attribute Structure with its name as defined
in Section 2.1.1.
|
Object
|
Encoding
|
|
|
Custom Attribute
|
Any data type or structure. If a structure, then the
structure SHALL NOT include sub structures
|
The name of the attribute SHALL start with 'x-' or
'y-'.
|
Table 137 Custom Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Client or Server
|
|
Modifiable by server
|
Yes, for server-created attributes
|
|
Modifiable by client
|
Yes, for client-created attributes
|
|
Deletable by client
|
Yes, for client-created attributes
|
|
Multiple instances permitted
|
Yes
|
|
When implicitly set
|
Create, Create Key Pair, Register, Derive Key,
Activate, Revoke, Destroy, Certify, Re-certify, Re-key, Re-key Key Pair
|
|
Applies to Object Types
|
All Objects
|
Table
138: Custom Attribute Rules
The Alternative Name attribute is used to
identify and locate the object. This attribute is assigned by the client, and
the Alternative Name Value is intended to be in a form that
humans are able to interpret. The key management system MAY specify rules by
which the client creates valid alternative names. Clients are informed of such
rules by a mechanism that is not specified by this standard. Alternative Names
MAY NOT be unique within a given key management domain.
|
Object
|
Encoding
|
REQUIRED
|
|
Alternative Name
|
Structure
|
|
|
Alternative Name Value
|
Text String
|
Yes
|
|
Alternative Name Type
|
Enumeration, see 9.1.3.2.34
|
Yes
|
Table 139: Alternative Name Attribute Structure
|
SHALL always have a value
|
No
|
|
Initially set by
|
Client
|
|
Modifiable by server
|
Yes (Only if no value present)
|
|
Modifiable by client
|
Yes
|
|
Deletable by client
|
Yes
|
|
Multiple instances permitted
|
Yes
|
|
Applies to Object Types
|
All Objects
|
Table 140: Alternative Name Attribute Rules
Key Value Present is an OPTIONAL attribute of the
managed object created by the server. It SHALL NOT be specified by the client
in a Register request. Key Value Present SHALL be created by the server
if the Key Value is absent from the Key Block in a Register request. The value
of Key Value Present SHALL NOT be modified by either the client or the server. Key
Value Present attribute MAY be used as a part of the Locate operation. This
attribute does not apply to Templates, Certificates, Public Keys or Opaque
Objects.
|
Object
|
Encoding
|
REQUIRED
|
|
Key Value Present
|
Boolean
|
No
|
Table 141: Key Value Present Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
During Register operation
|
|
Applies to Object Types
|
Symmetric Key, Private Key, Split Key, Secret Data
|
Table 142: Key Value Present Attribute Rules
Key Value Location is an OPTIONAL attribute of a
managed object. It MAY be specified by the client when the Key Value is omitted
from the Key Block in a Register request. Key Value Location is used to
indicate the location of the Key Value absent from the object being registered.
This attribute does not apply to Templates, Certificates, Public Keys or Opaque
Objects.
|
Object
|
Encoding
|
REQUIRED
|
|
Key Value Location
|
Structure
|
|
|
Key Value Location
Value
|
Text String
|
Yes
|
|
Key Value Location Type
|
Enumeration, see 9.1.3.2.35
|
Yes
|
Table 143: Key Value Location Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Client
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
Yes
|
|
Deletable by client
|
Yes
|
|
Multiple instances permitted
|
Yes
|
|
When implicitly set
|
Never
|
|
Applies to Object Types
|
Symmetric Key, Private Key, Split Key, Secret Data
|
Table 144: Key Value Location Attribute Rules
The Original Creation Date attribute contains the
date and time the object was originally created, which can be different from
when the object is registered with a key management server.
It is OPTIONAL for an object being registered by a client.
The Original Creation Date MAY be set by the client during a Register
operation. If no Original Creation Date attribute was set by the client
during a Register operation, it MAY do so at a later time through an Add
Attribute operation for that object.
It is mandatory for an object created on the server as a
result of a Create, Create Key Pair, Derive Key, Re-key, or Re-key Key Pair
operation. In such cases the Original Creation Date SHALL be set by the
server and SHALL be the same as the Initial Date attribute.
In all cases, once the Original Creation Date is
set, it SHALL NOT be deleted or updated.
|
Object
|
Encoding
|
|
Original Creation Date
|
Date-Time
|
Table 145: Original Creation Date Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Client or Server (when object is generated by Server)
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Create, Create Key Pair, Derive Key, Re-key, Re-key Key Pair
|
|
Applies to Object Types
|
All Objects
|
Table 146: Original Creation Date Attribute Rules
The Random Number Generator attribute contains the details
of the random number generator used during the creation of the managed cryptographic
object.
It is OPTIONAL for a managed cryptographic object being
registered by a client. The Random Number Generator MAY be set by the
client during a Register operation. If no Random Number Generator
attribute was set by the client during a Register operation, it MAY do so at a
later time through an Add Attribute operation for that object.
It is mandatory for an object created on the server as a
result of a Create, Create Key Pair, Derive Key, Re-key, or Re-key Key Pair
operation. In such cases the Random Number Generator SHALL be set by the
server depending on which random number generator was used. If the specific
details of the random number generator are unknown then the RNG Algorithm
within the RNG Parameters structure SHALL be set to Unspecified.
If one or more Random Number Generator attribute values
are provided in the template attributes (either directly or via reference to
templates which contain Random Number Generator attribute values) in a Create,
Create Key Pair, Derive Key, Re-key, or Re-key Key Pair operation then the
server SHALL use a random number generator that matches one of the Random
Number Generator attributes. If the server does not support or is otherwise
unable to use a matching random number generator then it SHALL fail the
request.
The Random Number Generator attribute SHALL NOT be
copied from the original object in a Re-key or Re-key Key Pair operation.
In all cases, once the Random Number Generator attribute
is set, it SHALL NOT be deleted or updated.
|
Object
|
Encoding
|
|
Random Number Generator
|
RNG Parameters (see 2.1.18)
|
Table 147: Random Number Generator Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Client (when the object is generated by the Client
and registered) or Server (when object is generated by Server)
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
Create, Create Key Pair, Derive Key, Re-key, Re-key
Key Pair
|
|
Applies to Object Types
|
All Cryptographic Objects
|
Table 148: Random Number Generator Attribute Rules
The PKCS#12 Friendly Name attribute is OPTIONAL. If supplied
on a Register Private Key with Key Format Type PKCS#12, it informs the server
of the alias/friendly name (see [RFC7292]) under which the private key and its
associated certificate chain SHALL be found in the Key Material. If no such alias/friendly
name is supplied, the server SHALL record the alias/friendly name (if any) it
finds for the first Private Key in the Key Material.
When a Get with Key Format Type PKCS#12 is issued, this
attribute informs the server what alias/friendly name the server SHALL use when
encoding the response. If this attribute is absent for the object on which the
Get is issued, the server SHOULD use an alias/friendly name of “alias”. Since
the PKCS#12 Friendly Name is defined in ASN.1 with an EQUALITY MATCHING RULE of
caseIgnoreMatch, clients and servers SHOULD utilize a lowercase text string.
|
Object
|
Encoding
|
|
PKCS#12 Friendly Name
|
Text String
|
Table 149: PKCS#12 Friendly Name Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Client or Server
|
|
Modifiable by server
|
No
|
|
Modifiable by client
|
Yes
|
|
Deletable by client
|
Yes
|
|
Multiple instances permitted
|
No
|
|
Applies to Object Types
|
Managed Cryptographic Objects
|
Table 150: Friendly Name Attribute Rules
The Description attribute is OPTIONAL, and its content is
used for informational purposes only. It is not used for policy enforcement.
The attribute is set by the client or the server.
|
Object
|
Encoding
|
|
Description
|
Text String
|
Table 151: Description Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Client or Server
|
|
Modifiable by server
|
Yes
|
|
Modifiable by client
|
Yes
|
|
Deletable by client
|
Yes
|
|
Multiple instances permitted
|
No
|
|
Applies to Object Types
|
All Objects
|
Table 152: Description Attribute Rules
The Comment attribute is OPTIONAL, and its content is used
for informational purposes only. It is not used for policy enforcement. The
attribute is set by the client or the server.
|
Object
|
Encoding
|
|
Description
|
Text String
|
Table 153: Comment Attribute
|
SHALL always have a value
|
No
|
|
Initially set by
|
Client or Server
|
|
Modifiable by server
|
Yes
|
|
Modifiable by client
|
Yes
|
|
Deletable by client
|
Yes
|
|
Multiple instances permitted
|
No
|
|
Applies to Object Types
|
All Objects
|
Table 154: Comment Rules
If True then the server SHALL prevent the object value being
retrieved (via the Get operation) unless it is wrapped by another key. The
server SHALL set the value to False if the value is not provided by the client.
|
Object
|
Encoding
|
|
Sensitive
|
Boolean
|
Table 155: Sensitive Attribute
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Client or Server
|
|
Modifiable by server
|
Yes
|
|
Modifiable by client
|
Yes
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
When object is created or registered
|
|
Applies to Object Types
|
All Objects
|
Table 156: Sensitive Attribute
Rules
The server SHALL set the value toTrue if the Sensitive
attribute has always been True and the value to False if the Sensitive
attribute has ever been set to False.
|
Object
|
Encoding
|
|
Sensitive
|
Boolean
|
Table 157: Always Sensitive
Attribute
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
Yes
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
When Sensitive attribute is set or changed
|
|
Applies to Object Types
|
All Objects
|
Table 158: Always Sensitive
Attribute Rules
If False then the server SHALL prevent the object value being
retrieved (via the Get operation). The server SHALL set the value to True if the
value is not provided by the client.
|
Object
|
Encoding
|
|
Extractable
|
Boolean
|
Table 159: Extractable
Attribute
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Client or Server
|
|
Modifiable by server
|
Yes
|
|
Modifiable by client
|
Yes
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
When object is created or registered
|
|
Applies to Object Types
|
All Objects
|
Table 160: Extractable Attribute
Rules
The server SHALL set the value to True if the Extractable attribute
has always been False, and set the value to False if the Extractable attribute has
ever been set to True.
|
Object
|
Encoding
|
|
Never Extractable
|
Boolean
|
Table 161: Never Extractable
Attribute
|
SHALL always have a value
|
Yes
|
|
Initially set by
|
Server
|
|
Modifiable by server
|
Yes
|
|
Modifiable by client
|
No
|
|
Deletable by client
|
No
|
|
Multiple instances permitted
|
No
|
|
When implicitly set
|
When Never Extractable attribute is
set or changed
|
|
Applies to Object Types
|
All Objects
|
Table 162: Never Extractable
Attribute Rules
The following subsections describe the operations that MAY
be requested by a key management client. Not all clients have to be capable of
issuing all operation requests; however any client that issues a specific
request SHALL be capable of understanding the response to the request. All
Object Management operations are issued in requests from clients to servers,
and results obtained in responses from servers to clients. Multiple operations
MAY be combined within a batch, resulting in a single request/response message
pair.
A number of the operations whose descriptions follow are
affected by a mechanism referred to as the ID Placeholder.
The key management server SHALL implement a temporary
variable called the ID Placeholder. This value consists of a single Unique
Identifier. It is a variable stored inside the server that is only valid and
preserved during the execution of a batch of operations. Once the batch of
operations has been completed, the ID Placeholder value SHALL be discarded
and/or invalidated by the server, so that subsequent requests do not find this
previous ID Placeholder available.
The ID Placeholder is obtained from the Unique Identifier
returned in response to the Create, Create Pair, Register, Derive Key, Re-key,
Re-key Key Pair, Certify, Re-Certify, Locate, and Recover operations. If any of
these operations successfully completes and returns a Unique Identifier, then the
server SHALL copy this Unique Identifier into the ID Placeholder variable,
where it is held until the completion of the operations remaining in the
batched request or until a subsequent operation in the batch causes the ID
Placeholder to be replaced. If the Batch Error Continuation Option is set to
Stop and the Batch Order Option is set to true, then subsequent operations in
the batched request MAY make use of the ID Placeholder by omitting the Unique
Identifier field from the request payloads for these operations.
Requests MAY contain attribute values to be assigned to
the object. This information is specified with a Template-Attribute (see
Section 2.1.8) that contains zero or more template names and zero or more
individual attributes. If more than one template name is specified, and there
is a conflict between the single-instance attributes in the templates, then the
value in the last of the conflicting templates takes precedence. If there is a
conflict between the single-instance attributes in the request and the
single-instance attributes in a specified template, then the attribute values
in the request take precedence. For multi-instance attributes, the union of
attribute values is used when the attributes are specified more than once.
The Template Managed Object is deprecated as of
version 1.3 of this specification and MAY be removed from subsequent versions
of the specification. Individual Attributes SHOULD be used in operations which
currently support use of a Name within a Template-Attribute to
reference a Template.
Responses MAY contain attribute values that were not
specified in the request, but have been implicitly set by the server. This
information is specified with a Template-Attribute that contains one or more
individual attributes.
For any operations that operate on Managed Objects already
stored on the server, any archived object SHALL first be made available by a
Recover operation (see Section 4.23) before they MAY be specified (i.e., as
on-line objects).
Multi-part cryptographic operations (operations where a
stream of data is provided across multiple requests from a client to a server)
are optionally supported by those cryptographic operations that include the
Correlation Value (see section 2.1.15), Init Indicator (see section 2.1.16) and Final Indicator (see section 2.1.17) request parameters.
For multi-part cryptographic operations the following
sequence is performed
- On the first request
a. Provide an
Init Indicator with a value of True
b. Provide any
other required parameters
c. Preserve
the Correlation Value returned in the response for use in subsequent requests
d. Use the Data
output (if any) from the response
- On subsequent requests
a. Provide
the Correlation Value from the response to the first request
b. Provide any
other required parameters
c. Use the
next block of Data output (if any) from the response
- On the final request
a. Provide
the Correlation Value from the response to the first request
b. Provide a Final
Indicator with a value of True
c. Use the
final block of Data output (if any) from the response
Single-part cryptographic operations (operations where a
single input is provided and a single response returned) the following sequence
is performed:
- On each request
a. Do not
provide an Init Indicator, Final Indicator or Correlation Value or provide an
Init indicator and Final Indicator but no Correlation Value.
b. Provide any
other required parameters
c. Use the
Data output from the response
Data is always required in cryptographic operations except
when either Init Indicator or Final Indicator is true.
4.1 Create
This operation requests the server to generate a new
symmetric key as a Managed Cryptographic Object. This operation is not used to
create a Template object (see Register operation, Section 4.3).
The request contains information about the type of object
being created, and some of the attributes to be assigned to the object (e.g.,
Cryptographic Algorithm, Cryptographic Length, etc.). This information MAY be
specified by the names of Template objects that already exist.
The response contains the Unique Identifier of the created
object. The server SHALL copy the Unique Identifier returned by this operation
into the ID Placeholder variable.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Object Type, see 3.3
|
Yes
|
Determines the type of object to be created.
|
|
Template-Attribute, see 2.1.7.14
|
Yes
|
Specifies desired attributes using to be associated
with the new object templates and/or individual attributes.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
Table 163: Create Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Object Type, see 3.3
|
Yes
|
Type of object created.
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the newly created object.
|
|
Template-Attribute, see 2.1.7.14
|
No
|
An OPTIONAL list of object attributes with values
that were not specified in the request, but have been implicitly set by the
key management server.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
Table 164: Create Response Payload
Table 165 indicates which
attributes SHALL be included in the Create request using the Template-Attribute
object.
|
Attribute
|
REQUIRED
|
|
Cryptographic Algorithm, see 3.4
|
Yes
|
|
Cryptographic Usage Mask, see 3.19
|
Yes
|
Table 165: Create Attribute Requirements
This operation requests the server to generate a new
public/private key pair and register the two corresponding new Managed
Cryptographic Objects.
The request contains attributes to be assigned to the
objects (e.g., Cryptographic Algorithm, Cryptographic Length, etc.). Attributes
and Template Names MAY be specified for both keys at the same time by
specifying a Common Template-Attribute object in the request. Attributes not
common to both keys (e.g., Name, Cryptographic Usage Mask) MAY be specified
using the Private Key Template-Attribute and Public Key Template-Attribute
objects in the request, which take precedence over the Common
Template-Attribute object.
The Template Managed Object is deprecated as of
version 1.3 of this specification and MAY be removed from subsequent versions
of the specification. Individual Attributes SHOULD be used in operations which
currently support use of a Name within a Template-Attribute to
reference a Template.
For the Private Key, the server SHALL create a Link
attribute of Link Type Public Key pointing to the Public Key. For the Public
Key, the server SHALL create a Link attribute of Link Type Private Key pointing
to the Private Key. The response contains the Unique Identifiers of both created
objects. The ID Placeholder value SHALL be set to the Unique Identifier of the
Private Key.
|
Request
Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Common Template-Attribute, see 2.1.7.14
|
No
|
Specifies desired attributes in templates and/or as
individual attributes to be associated with the new object that apply to both
the Private and Public Key Objects.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
|
Private Key Template-Attribute, see 2.1.7.14
|
No
|
Specifies templates and/or attributes to be
associated with the new object that apply to the Private Key Object. Order of
precedence applies.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
|
Public Key Template-Attribute, see 2.1.7.14
|
No
|
Specifies templates and/or attributes to be
associated with the new object that apply to the Public Key Object. Order of
precedence applies.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
Table 166: Create Key Pair Request Payload
For multi-instance attributes,
the union of the values found in the templates and attributes of the Common,
Private, and Public Key Template-Attribute SHALL be used. For single-instance
attributes, the order of precedence is as follows:
1. attributes
specified explicitly in the Private and Public Key Template-Attribute, then
2. attributes
specified via templates in the Private and Public Key Template-Attribute, then
3. attributes
specified explicitly in the Common Template-Attribute, then
4. attributes
specified via templates in the Common Template-Attribute.
If there are multiple templates in the Common, Private, or
Public Key Template-Attribute, then the last value of the single-instance
attribute that conflicts takes precedence.
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Private Key Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the newly created Private
Key object.
|
|
Public Key Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the newly created Public
Key object.
|
|
Private Key Template-Attribute, see 2.1.7.14
|
No
|
An OPTIONAL list of attributes, for the Private Key
Object, with values that were not specified in the request, but have been
implicitly set by the key management server.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
|
Public Key Template-Attribute, see 2.1.7.14
|
No
|
An OPTIONAL list of attributes, for the Public Key
Object, with values that were not specified in the request, but have been
implicitly set by the key management server.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
Table 167: Create Key Pair Response Payload
Table 168 indicates which
attributes SHALL be included in the Create Key pair request using
Template-Attribute objects, as well as which attributes SHALL have the same
value for the Private and Public Key.
|
Attribute
|
REQUIRED
|
SHALL contain the same value for both Private and
Public Key
|
|
Cryptographic Algorithm, see 3.4
|
Yes
|
Yes
|
|
Cryptographic Length, see 3.5
|
No
|
Yes
|
|
Cryptographic Usage Mask, see 3.19
|
Yes
|
No
|
|
Cryptographic Domain Parameters, see 3.7
|
No
|
Yes
|
|
Cryptographic Parameters, see 3.6
|
No
|
Yes
|
Table 168: Create Key Pair Attribute Requirements
Setting the same Cryptographic Length value for both private
and public key does not imply that both keys are of equal length. For RSA,
Cryptographic Length corresponds to the bit length of the Modulus. For DSA and
DH algorithms, Cryptographic Length corresponds to the bit length of parameter
P, and the bit length of Q is set separately in the Cryptographic Domain
Parameters attribute. For ECDSA, ECDH, and ECMQV algorithms, Cryptographic Length
corresponds to the bit length of parameter Q.
This operation requests the server to register a Managed
Object that was created by the client or obtained by the client through some
other means, allowing the server to manage the object. The arguments in the
request are similar to those in the Create operation, but contain the object
itself for storage by the server.
The request contains information about the type of object
being registered and attributes to be assigned to the object (e.g., Cryptographic
Algorithm, Cryptographic Length, etc.). This information SHALL be specified by
the use of a Template-Attribute object.
The response contains the Unique Identifier assigned by
the server to the registered object. The server SHALL copy the Unique Identifier
returned by this operations into the ID Placeholder variable. The Initial Date
attribute of the object SHALL be set to the current time.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Object Type, see 3.3
|
Yes
|
Determines the type of object being registered.
|
|
Template-Attribute, see 2.1.7.14
|
Yes
|
Specifies desired object attributes to be associated
with the new object using templates and/or individual attributes.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
|
Certificate, Symmetric Key, Private Key, Public Key,
Split Key, Template Secret Data or Opaque Object, see 2.1.22
|
Yes
|
The object being registered. The object and
attributes MAY be wrapped.
|
Table 169: Register Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the newly registered
object.
|
|
Template-Attribute, see 2.1.7.14
|
No
|
An OPTIONAL list of object attributes with values
that were not specified in the request, but have been implicitly set by the
key management server.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
Table 170: Register Response Payload
If a Managed Cryptographic Object
is registered, then the following attributes SHALL be included in the Register
request, either explicitly, or via specification of a template that contains
the attribute.
|
Attribute
|
REQUIRED
|
|
Cryptographic Algorithm, see 3.4
|
Yes, MAY be
omitted only if this information is encapsulated in the Key Block. Does not
apply to Secret Data. If present, then Cryptographic Length below SHALL also
be present.
|
|
Cryptographic Length, see 3.5
|
Yes, MAY be
omitted only if this information is encapsulated in the Key Block. Does not
apply to Secret Data. If present, then Cryptographic Algorithm above SHALL
also be present.
|
|
Certificate Length, see 3.9
|
Yes. Only applies to Certificates.
|
|
Cryptographic Usage Mask, see 3.19
|
Yes.
|
|
Digital Signature Algorithm, see 3.16
|
Yes, MAY be
omitted only if this information is encapsulated in the Certificate object.
Only applies to Certificates.
|
Table
171: Register Attribute Requirements
This request is used to generate a replacement key for an
existing symmetric key. It is analogous to the Create operation, except that
attributes of the replacement key are copied from the existing key, with the
exception of the attributes listed in Random Number Generator 3.44.
As the replacement key takes over the name attribute of
the existing key, Re-key SHOULD only be performed once on a given key.
The server SHALL copy the Unique Identifier of the
replacement key returned by this operation into the ID Placeholder variable.
For the existing key, the server SHALL create a Link
attribute of Link Type Replacement Object pointing to the replacement key. For
the replacement key, the server SHALL create a Link attribute of Link Type
Replaced Key pointing to the existing key.
An Offset MAY be used to indicate the difference
between the Initialization Date and the Activation Date of the replacement key.
If no Offset is specified, the Activation Date, Process Start Date, Protect
Stop Date and Deactivation Date values are copied from the existing key. If
Offset is set and dates exist for the existing key, then the dates of the
replacement key SHALL be set based on the dates of the existing key as follows:
|
Attribute in Existing Key
|
Attribute in Replacement Key
|
|
Initial Date (IT1)
|
Initial Date (IT2) > IT1
|
|
Activation Date (AT1)
|
Activation Date (AT2) = IT2+
Offset
|
|
Process Start Date (CT1)
|
Process Start Date = CT1+(AT2-
AT1)
|
|
Protect Stop Date (TT1)
|
Protect Stop Date = TT1+(AT2-
AT1)
|
|
Deactivation Date (DT1)
|
Deactivation Date = DT1+(AT2-
AT1)
|
Table
172: Computing New Dates from Offset during Re-key
Attributes requiring special
handling when creating the replacement key are:
|
Attribute
|
Action
|
|
Initial Date, see 3.23
|
Set to the current time
|
|
Destroy Date, see 3.28
|
Not set
|
|
Compromise Occurrence Date, see 3.29
|
Not set
|
|
Compromise Date, see 3.30
|
Not set
|
|
Revocation Reason, see 3.31
|
Not set
|
|
Unique Identifier, see 3.1
|
New value generated
|
|
Usage Limits, see 3.21
|
The Total value is copied from the existing key, and
the Count value in the existing key is set to the Total value.
|
|
Name, see 3.2
|
Set to the name(s) of the existing key; all name
attributes are removed from the existing key.
|
|
State, see Error! Reference source not found.
|
Set based on attributes values, such as dates, as
shown in Table 172
|
|
Digest, see 3.16
|
Recomputed from the replacement key value
|
|
Link, see 3.35
|
Set to point to the existing key as the replaced key
|
|
Last Change Date, see 3.38
|
Set to current time
|
|
Random Number Generator, see 3.44
|
Set to the random number generator used for creating
the new managed object. Not copied from the original object.
|
Table 173: Re-key Attribute Requirements
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
Determines the existing Symmetric Key being
re-keyed. If omitted, then the ID Placeholder value is used by the server as
the Unique Identifier.
|
|
Offset
|
No
|
An Interval object indicating the difference between
the Initialization Date and the Activation Date of the replacement key to be
created.
|
|
Template-Attribute, see 2.1.7.14
|
No
|
Specifies desired object attributes using templates
and/or individual attributes.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
Table 174: Re-key Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the newly-created
replacement Symmetric Key.
|
|
Template-Attribute, see 2.1.7.14
|
No
|
An OPTIONAL list of object attributes with values
that were not specified in the request, but have been implicitly set by the
key management server.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
Table
175: Re-key Response Payload
This request is used to generate a replacement key pair
for an existing public/private key pair. It is analogous to the Create Key
Pair operation, except that attributes of the replacement key pair are copied
from the existing key pair, with the exception of the attributes listed in Random Number Generator 3.44
As the replacement of the key pair takes over the name
attribute for the existing public/private key pair, Re-key Key Pair SHOULD only
be performed once on a given key pair.
For both the existing public key and private key, the
server SHALL create a Link attribute of Link Type Replacement Key pointing to
the replacement public and private key, respectively. For both the replacement
public and private key, the server SHALL create a Link attribute of Link Type
Replaced Key pointing to the existing public and private key, respectively.
The server SHALL copy the Private Key Unique Identifier of
the replacement private key returned by this operation into the ID Placeholder
variable.
An Offset MAY be used to indicate the difference
between the Initialization Date and the Activation Date of the replacement key
pair. If no Offset is specified, the Activation Date and Deactivation Date
values are copied from the existing key pair. If Offset is set and dates exist
for the existing key pair, then the dates of the replacement key pair SHALL be
set based on the dates of the existing key pair as follows
|
Attribute in Existing Key Pair
|
Attribute in Replacement Key Pair
|
|
Initial Date (IT1)
|
Initial Date (IT2)
> IT1
|
|
Activation Date (AT1)
|
Activation Date (AT2) = IT2+
Offset
|
|
Deactivation Date (DT1)
|
Deactivation Date = DT1+(AT2-
AT1)
|
Table 176: Computing New Dates from Offset during Re-key Key Pair
Attributes for the replacement key pair that are not
copied from the existing key pair and which are handled in a specific way are:
|
Attribute
|
Action
|
|
Private Key Unique Identifier, see 3.1
|
New value generated
|
|
Public Key Unique Identifier, see 3.1
|
New value generated
|
|
Name, see 3.2
|
Set to the name(s) of the existing public/private
keys; all name attributes of the existing public/private keys are removed.
|
|
Digest, see 3.17
|
Recomputed for both replacement public and private
keys from the new public and private key values
|
|
Usage Limits, see 3.21
|
The Total Bytes/Total Objects value is copied from
the existing key pair, while the Byte Count/Object Count values are set to
the Total Bytes/Total Objects.
|
|
State, see Error! Reference source not found.
|
Set based on attributes values, such as dates, as
shown in Table 176.
|
|
Initial Date, see 3.23
|
Set to the current time
|
|
Destroy Date, see 3.28
|
Not set
|
|
Compromise Occurrence Date, see 3.29
|
Not set
|
|
Compromise Date, see 3.30
|
Not set
|
|
Revocation Reason, see 3.31
|
Not set
|
|
Link, see 3.35
|
Set to point to the existing public/private keys as
the replaced public/private keys
|
|
Last Change Date, see 3.38
|
Set to current time
|
|
Random Number Generator, see 3.44
|
Set to the random number generator used for creating
the new managed object. Not copied from the original object.
|
Table 177: Re-key Key Pair Attribute Requirements
|
Request
Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Private Key Unique Identifier, see 3.1
|
No
|
Determines the existing Asymmetric key pair to be
re-keyed. If omitted, then the ID Placeholder is substituted by the server.
|
|
Offset
|
No
|
An Interval object indicating the difference between
the Initialization date and the Activation Date of the replacement key pair
to be created.
|
|
Common Template-Attribute, see 2.1.7.14
|
No
|
Specifies desired attributes in templates and/or as
individual attributes that apply to both the Private and Public Key Objects.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
|
Private Key Template-Attribute, see 2.1.7.14
|
No
|
Specifies templates and/or attributes that apply to
the Private Key Object. Order of precedence applies.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
|
Public Key Template-Attribute, see 2.1.7.14
|
No
|
Specifies templates and/or attributes that apply to
the Public Key Object. Order of precedence applies.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
Table 178: Re-key Key Pair Request Payload
For multi-instance attributes,
the union of the values found in the templates and attributes of the Common,
Private, and Public Key Template-Attribute is used. For single-instance
attributes, the order of precedence is as follows:
1. attributes
specified explicitly in the Private and Public Key Template-Attribute, then
2. attributes
specified via templates in the Private and Public Key Template-Attribute, then
3. attributes
specified explicitly in the Common Template-Attribute, then
4. attributes
specified via templates in the Common Template-Attribute.
If there are multiple templates in the Common, Private, or
Public Key Template-Attribute, then the subsequent value of the single-instance
attribute takes precedence.
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Private Key Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the newly created
replacement Private Key object.
|
|
Public Key Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the newly created
replacement Public Key object.
|
|
Private Key Template-Attribute, see 2.1.7.14
|
No
|
An OPTIONAL list of attributes, for the Private Key
Object, with values that were not specified in the request, but have been
implicitly set by the key management server.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
|
Public Key Template-Attribute, see 2.1.7.14
|
No
|
An OPTIONAL list of attributes, for the Public Key
Object, with values that were not specified in the request, but have been
implicitly set by the key management server.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
Table 179: Re-key Key Pair Response Payload
This request is used to derive a Symmetric Key or Secret
Data object from keys or Secret Data objects that are already known to the key
management system. The request SHALL only apply to Managed Cryptographic
Objects that have the Derive Key bit set in the Cryptographic Usage Mask
attribute of the specified Managed Object (i.e., are able to be used for key
derivation). If the operation is issued for an object that does not have this
bit set, then the server SHALL return an error. For all derivation methods, the
client SHALL specify the desired length of the derived key or Secret Data
object using the Cryptographic Length attribute. If a key is created, then the
client SHALL specify both its Cryptographic Length and Cryptographic Algorithm.
If the specified length exceeds the output of the derivation method, then the
server SHALL return an error. Clients MAY derive multiple keys and IVs by
requesting the creation of a Secret Data object and specifying a Cryptographic
Length that is the total length of the derived object. If the specified length
exceeds the output of the derivation method, then the server SHALL return an
error.
The fields in the request specify the Unique Identifiers
of the keys or Secret Data objects to be used for derivation (e.g., some
derivation methods MAY use multiple keys or Secret Data objects to derive the
result), the method to be used to perform the derivation, and any parameters
needed by the specified method. The method is specified as an enumerated value.
Currently defined derivation methods include:
·
PBKDF2 – This method is used to derive a symmetric key
from a password or pass phrase. The PBKDF2 method is published in [PKCS#5] and [RFC2898].
·
HASH – This method derives a key by computing a hash over
the derivation key or the derivation data.
·
HMAC – This method derives a key by computing an HMAC over
the derivation data.
·
ENCRYPT – This method derives a key by encrypting the
derivation data.
·
NIST800-108-C – This method derives a key by computing the
KDF in Counter Mode as specified in [SP800-108].
·
NIST800-108-F – This method derives a key by computing the
KDF in Feedback Mode as specified in [SP800-108].
·
NIST800-108-DPI – This method derives a key by computing
the KDF in Double-Pipeline Iteration Mode as specified in [SP800-108].
·
Extensions.
The server SHALL perform the derivation function, and then
register the derived object as a new Managed Object, returning the new Unique
Identifier for the new object in the response. The server SHALL copy the Unique
Identifier returned by this operation into the ID Placeholder variable.
For
the keys or Secret Data objects from which the key or Secret Data object is
derived, the server SHALL create a Link attribute of Link Type Derived Key
pointing to the Symmetric Key or Secret Data object derived as a result
of this operation. For the
Symmetric Key or Secret Data object derived as a result of this
operation, the server SHALL create a Link attribute of Link Type Derivation Base Object
pointing to the keys or Secret Data objects from which the key or Secret Data
object is derived.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Object Type, see 3.3
|
Yes
|
Determines the type of object to be created.
|
|
Unique Identifier,
see 3.1
|
Yes. MAY be repeated
|
Determines the object or objects to be used to
derive a new key. Note that the current value of the ID Placeholder SHALL NOT
be used in place of a Unique Identifier in this operation.
|
|
Derivation Method, see 9.1.3.2.21
|
Yes
|
An Enumeration object specifying the method to be
used to derive the new key.
|
|
Derivation Parameters, see below
|
Yes
|
A Structure object containing the parameters needed
by the specified derivation method.
|
|
Template-Attribute, see 2.1.7.14
|
Yes
|
Specifies desired attributes to be associated with
the new object using templates and/or individual attributes; the length and
algorithm SHALL always be specified for the creation of a symmetric key.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
Table 180: Derive Key Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier,
see 3.1
|
Yes
|
The Unique Identifier of the newly derived key or Secret Data object.
|
|
Template-Attribute, see 2.1.7.14
|
No
|
An OPTIONAL list of object attributes with values
that were not specified in the request, but have been implicitly set by the
key management server.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
Table 181: Derive Key Response Payload
The Derivation
Parameters for all derivation methods consist of the following
parameters, except PBKDF2, which takes two additional parameters.
|
Object
|
Encoding
|
REQUIRED
|
|
Derivation Parameters
|
Structure
|
Yes.
|
|
Cryptographic
Parameters, see 3.6
|
Structure
|
Yes, except for HMAC derivation keys.
|
|
Initialization Vector
|
Byte String
|
No, depends on PRF and mode of operation: empty IV
is assumed if not provided.
|
|
Derivation Data
|
Byte String
|
Yes, unless the Unique Identifier of a Secret Data
object is provided.
|
Table 182: Derivation Parameters Structure (Except PBKDF2)
Cryptographic Parameters identify
the Pseudorandom Function (PRF) or the mode of operation of the PRF (e.g., if a
key is to be derived using the HASH derivation method, then clients are
REQUIRED to indicate the hash algorithm inside Cryptographic Parameters;
similarly, if a key is to be derived using AES in CBC mode, then clients are
REQUIRED to indicate the Block Cipher Mode). The server SHALL verify that the
specified mode matches one of the instances of Cryptographic Parameters set for
the corresponding key. If Cryptographic Parameters are omitted, then the server
SHALL select the Cryptographic Parameters with the lowest Attribute Index for
the specified key. If the corresponding key does not have any Cryptographic
Parameters attribute, or if no match is found, then an error is returned.
If a key is derived using HMAC, then the attributes of the
derivation key provide enough information about the PRF, and the Cryptographic
Parameters are ignored.
Derivation Data is either the data to be encrypted,
hashed, or HMACed. For the NIST SP 800-108 methods [SP800-108],
Derivation Data is Label||{0x00}||Context, where the all-zero byte is OPTIONAL.
Most derivation methods (e.g., Encrypt) REQUIRE a
derivation key and the derivation data to be used. The HASH derivation method
REQUIRES either a derivation key or derivation data. Derivation data MAY either
be explicitly provided by the client with the Derivation Data field or
implicitly provided by providing the Unique Identifier of a Secret Data object.
If both are provided, then an error SHALL be returned.
The PBKDF2 derivation method takes two additional
parameters:
|
Object
|
Encoding
|
REQUIRED
|
|
Derivation Parameters
|
Structure
|
Yes.
|
|
Cryptographic
Parameters, see 3.6
|
Structure
|
No, depends on the PRF.
|
|
Initialization Vector
|
Byte String
|
No, depends on the PRF (if different than those defined in [PKCS#5]) and mode of operation: an empty IV is assumed if not
provided.
|
|
Derivation Data
|
Byte String
|
Yes, unless the Unique Identifier of a Secret Data
object is provided.
|
|
Salt
|
Byte String
|
Yes.
|
|
Iteration Count
|
Integer
|
Yes.
|
Table
183: PBKDF2 Derivation Parameters Structure
This request is used to generate a Certificate object for
a public key. This request supports the certification of a new public key, as
well as the certification of a public key that has already been certified
(i.e., certificate update). Only a single certificate SHALL be requested at a
time. Server support for this operation is OPTIONAL. If the server does not
support this operation, an error SHALL be returned.
The Certificate Request object MAY be omitted, in which
case the public key for which a Certificate object is generated SHALL be
specified by its Unique Identifier only. If the Certificate Request Type and
the Certificate Request objects are omitted from the request, then the
Certificate Type SHALL be specified using the Template-Attribute object.
The Certificate Request is passed as a Byte String, which
allows multiple certificate request types for X.509 certificates (e.g.,
PKCS#10, PEM, etc.) to be submitted to the server.
The generated Certificate object whose Unique Identifier is returned MAY be obtained by the client via a
Get operation in the same batch, using the ID Placeholder mechanism.
For the public key, the server SHALL create a Link
attribute of Link Type Certificate pointing to the generated certificate. For
the generated certificate, the server SHALL create a Link attribute of Link
Type Public Key pointing to the Public Key.
The server SHALL copy the Unique Identifier of the
generated certificate returned by this operation into the ID Placeholder
variable.
If the information in the Certificate Request conflicts
with the attributes specified in the Template-Attribute, then the information
in the Certificate Request takes precedence.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
The Unique Identifier of the Public Key being
certified. If omitted, then the ID Placeholder value is used by the server as
the Unique Identifier.
|
|
Certificate Request Type, see 9.1.3.2.22
|
No
|
An Enumeration object specifying the type of
certificate request. It is REQUIRED if the Certificate Request is present.
|
|
Certificate Request
|
No
|
A Byte String object with the certificate request.
|
|
Template-Attribute, see 2.1.7.14
|
No
|
Specifies desired object attributes using templates
and/or individual attributes.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
Table 184: Certify Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the generated Certificate
object.
|
|
Template-Attribute, see 2.1.7.14
|
No
|
An OPTIONAL list of object attributes with values
that were not specified in the request, but have been implicitly set by the
key management server.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
Table
185: Certify Response Payload
This request is used to renew an existing certificate for
the same key pair. Only a single certificate SHALL be renewed at a time. Server
support for this operation is OPTIONAL. If the server does not support this
operation, an error SHALL be returned.
The Certificate Request object MAY be omitted, in which
case the public key for which a Certificate object is generated SHALL be
specified by its Unique Identifier only. If the Certificate Request Type and
the Certificate Request objects are omitted and the Certificate Type is not
specified using the Template-Attribute object in the request, then the
Certificate Type of the new certificate SHALL be the same as that of the
existing certificate.
The Certificate Request is passed as a Byte String, which
allows multiple certificate request types for X.509 certificates (e.g.,
PKCS#10, PEM, etc.) to be submitted to the server.
The server SHALL copy the Unique Identifier of the new
certificate returned by this operation into the ID Placeholder variable.
If the information in the Certificate Request field in the
request conflicts with the attributes specified in the Template-Attribute, then
the information in the Certificate Request takes precedence.
As the new certificate takes over the name attribute of the
existing certificate, Re-certify SHOULD only be performed once on a given
(existing) certificate.
For the existing certificate, the server SHALL create a
Link attribute of Link Type Replacement pointing to the new certificate. For
the new certificate, the server SHALL create a Link attribute of Link Type
Replaced pointing to the existing certificate. For the public key, the server
SHALL change the Link attribute of Link Type Certificate to point to the new
certificate.
An Offset MAY be used to indicate the difference
between the Initialization Date and the Activation Date of the new certificate.
If no Offset is specified, the Activation Date and Deactivation Date values are
copied from the existing certificate. If Offset is set and dates exist for the existing
certificate, then the dates of the new certificate SHALL be set based on the
dates of the existing certificate as follows:
|
Attribute in Existing Certificate
|
Attribute in New Certificate
|
|
Initial Date (IT1)
|
Initial Date (IT2)
> IT1
|
|
Activation Date (AT1)
|
Activation Date (AT2) = IT2+
Offset
|
|
Deactivation Date (DT1)
|
Deactivation Date = DT1+(AT2-
AT1)
|
Table
186: Computing New Dates from Offset during Re-certify
Attributes that are not copied
from the existing certificate and that are handled in a specific way for the
new certificate are:
|
Attribute
|
Action
|
|
Initial Date, see 3.23
|
Set to current time.
|
|
Destroy Date, see 3.28
|
Not set.
|
|
Revocation Reason, see 3.31
|
Not set.
|
|
Unique Identifier, see 3.2
|
New value generated.
|
|
Name, see 3.2
|
Set to the name(s) of the existing certificate; all name attributes
are removed from the existing certificate.
|
|
State, see Error! Reference source not found.
|
Set based on attributes values, such as dates, as shown in Table 186.
|
|
Digest, see 3.16
|
Recomputed from the new certificate value.
|
|
Link, see 3.35
|
Set to point to the existing certificate as the replaced certificate.
|
|
Last Change Date, see 3.38
|
Set to current time.
|
Table 187: Re-certify Attribute Requirements
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
The Unique Identifier of the Certificate being
renewed. If omitted, then the ID Placeholder value is used by the server as
the Unique Identifier.
|
|
Certificate Request Type, see 9.1.3.2.22
|
No
|
An Enumeration object specifying the type of
certificate request. It is REQUIRED if the Certificate Request is present.
|
|
Certificate Request
|
No
|
A Byte String object with the certificate request.
|
|
Offset
|
No
|
An Interval object indicating the difference between
the Initial Date of the new certificate and the Activation Date of the new
certificate.
|
|
Template-Attribute, see 2.1.7.14
|
No
|
Specifies desired object attributes using templates
and/or individual attributes.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
Table 188: Re-certify Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the new certificate.
|
|
Template-Attribute, see 2.1.7.14
|
No
|
An OPTIONAL list of object attributes with values
that were not specified in the request, but have been implicitly set by the
key management server.
The Template Managed Object is deprecated as
of version 1.3 of this specification and MAY be removed from subsequent
versions of the specification. Individual Attributes SHOULD be used in
operations which currently support use of a Name within a Template-Attribute
to reference a Template.
|
Table
189: Re-certify Response Payload
This operation requests that the server search for one or
more Managed Objects, depending on the attributes specified in the request. All
attributes are allowed to be used. However, Attribute Index values SHOULD NOT
be specified in the request. Attribute Index values that are provided SHALL be
ignored by the server. The request MAY contain a Maximum Items field,
which specifies the maximum number of objects to be returned. If the Maximum
Items field is omitted, then the server MAY return all objects matched, or MAY
impose an internal maximum limit due to resource limitations.
The request MAY contain an Offset Items field,
which specifies the number of objects to skip that satisfy the identification
criteria specified in the request. An Offset Items field of 0 is the
same as omitting the Offset Items field. If both Offset Items and
Maximum Items are specified in the request, the server skips Offset
Items objects and returns up to Maximum Items objects.
If more than one object satisfies the identification
criteria specified in the request, then the response MAY contain Unique
Identifiers for multiple Managed Objects. Returned objects SHALL match all of
the attributes in the request. If no objects match, then an empty response
payload is returned. If no attribute is specified in the request, any object
SHALL be deemed to match the Locate request. The response MAY include Located
Items which is the count of all objects that satisfy the identification
criteria.
The server returns a list of Unique Identifiers of the
found objects, which then MAY be retrieved using the Get operation. If the
objects are archived, then the Recover and Get operations are REQUIRED to be
used to obtain those objects. If a single Unique Identifier is returned to the
client, then the server SHALL copy the Unique Identifier returned by this
operation into the ID Placeholder variable. If the Locate operation matches
more than one object, and the Maximum Items value is omitted in the request, or
is set to a value larger than one, then the server SHALL empty the ID
Placeholder, causing any subsequent operations that are batched with the
Locate, and which do not specify a Unique Identifier explicitly, to fail. This
ensures that these batched operations SHALL proceed only if a single object is
returned by Locate.
Wild-cards or regular expressions (defined, e.g., in [ISO/IEC 9945-2]) MAY be supported by specific key
management system implementations for matching attribute fields when the field
type is a Text String or a Byte String.
The Date attributes in the Locate request (e.g., Initial
Date, Activation Date, etc.) are used to specify a time or a time range for the
search. If a single instance of a given Date attribute is used in the request
(e.g., the Activation Date), then objects with the same Date attribute are considered
to be matching candidate objects. If two instances of the same Date attribute
are used (i.e., with two different values specifying a range), then objects for
which the Date attribute is inside or at a limit of the range are considered to
be matching candidate objects. If a Date attribute is set to its largest
possible value, then it is equivalent to an undefined attribute. The KMIP Usage
Guide [KMIP-UG] provides examples.
When the Cryptographic Usage Mask attribute is specified
in the request, candidate objects are compared against this field via an
operation that consists of a logical AND of the requested mask with the mask in
the candidate object, and then a comparison of the resulting value with the
requested mask. For example, if the request contains a mask value of
10001100010000, and a candidate object mask contains 10000100010000, then the
logical AND of the two masks is 10000100010000, which is compared against the mask
value in the request (10001100010000) and the match fails. This means that a
matching candidate object has all of the bits set in its mask that are set in
the requested mask, but MAY have additional bits set.
When the Usage Limits attribute is specified in the
request, matching candidate objects SHALL have a Usage Limits Count and Usage
Limits Total equal to or larger than the values specified in the request.
When an attribute that is defined as a structure is
specified, all of the structure fields are not REQUIRED to be specified. For
instance, for the Link attribute, if the Linked Object Identifier value is
specified without the Link Type value, then matching candidate objects have the
Linked Object Identifier as specified, irrespective of their Link Type.
When the Object Group attribute and the Object Group
Member flag are specified in the request, and the value specified for Object
Group Member is ‘Group Member Fresh’, matching candidate objects SHALL be fresh
objects (see 3.34) from the object group. If there are no more fresh objects in
the group, the server MAY choose to generate a new object on-the-fly, based on
server policy. If the value specified for Object Group Member is ‘Group Member
Default’, the server locates the default object as defined by server policy.
The Storage Status Mask field (see Section 9.1.3.3.2) is used to indicate whether only on-line
objects, only archived objects, or both on-line and archived objects are to be
searched. Note that the server MAY store attributes of archived objects in
order to expedite Locate operations that search through archived objects.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Maximum Items
|
No
|
An Integer object that indicates the maximum number
of object identifiers the server MAY return.
|
|
Offset Items
|
No
|
An Integer object that indicates the number of
object identifiers to skip that satisfy the identification criteria specified
in the request.
|
|
Storage Status Mask, see 9.1.3.3.2
|
No
|
An Integer object (used as a bit mask) that
indicates whether only on-line objects, only archived objects, or both
on-line and archived objects are to be searched. If omitted, then on-line
only is assumed.
|
|
Object Group Member, see 9.1.3.2.33
|
No
|
An Enumeration object that indicates the object
group member type.
|
|
Attribute, see 3
|
No, MAY be repeated
|
Specifies an attribute and its value(s) that are
REQUIRED to match those in a candidate object (according to the matching
rules defined above).
|
Table 190: Locate Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Located Items
|
No
|
An Integer object that indicates the number of
object identifiers that satisfy the identification criteria specified in the
request. A server MAY elect to omit this value from the Response if it is unable
or unwilling to determine the total count of matched items.
A server MAY elect to return the Located Items value
even if Offset Items is not present in the Request.
|
|
Unique Identifier, see 3.1
|
No, MAY be repeated
|
The Unique Identifier of the located objects.
|
Table
191: Locate Response Payload
This operation requests that the server check for the use
of a Managed Object according to values specified in the request. This
operation SHOULD only be used when placed in a batched set of operations,
usually following a Locate, Create, Create Pair, Derive Key, Certify,
Re-Certify, Re-key or Re-key Key Pair operation, and followed by a Get
operation.
If the server determines that the client is allowed to use
the object according to the specified attributes, then the server returns the
Unique Identifier of the object.
If the server determines that the client is not allowed to
use the object according to the specified attributes, then the server empties
the ID Placeholder and does not return the Unique Identifier, and the operation
returns the set of attributes specified in the request that caused the server
policy denial. The only attributes returned are those that resulted in the
server determining that the client is not allowed to use the object, thus
allowing the client to determine how to proceed.
In a batch containing a Check operation the Batch Order
Option SHOULD be set to true. Only STOP or UNDO Batch Error Continuation Option
values SHOULD be used by the client in such a batch. Additional attributes that
MAY be specified in the request are limited to:
·
Usage Limits Count (see Section 3.21) – The request MAY contain
the usage amount that the client deems necessary to complete its needed
function. This does not require that any subsequent Get Usage Allocation
operations request this amount. It only means that the client is ensuring that
the amount specified is available.
·
Cryptographic Usage Mask – This is used to specify the
cryptographic operations for which the client intends to use the object (see
Section 3.19). This allows the server to determine if the policy allows this
client to perform these operations with the object. Note that this MAY be a
different value from the one specified in a Locate operation that precedes this
operation. Locate, for example, MAY specify a Cryptographic Usage Mask
requesting a key that MAY be used for both Encryption and Decryption, but the
value in the Check operation MAY specify that the client is only using the key
for Encryption at this time.
·
Lease Time – This specifies a desired lease time (see Section 3.20). The client MAY use this to determine if the server allows the client to use
the object with the specified lease or longer. Including this attribute in the
Check operation does not actually cause the server to grant a lease, but only
indicates that the requested lease time value MAY be granted if requested by a
subsequent, batched Obtain Lease operation.
Note that these objects are not encoded in an Attribute
structure as shown in Section 2.1.1
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
Determines the object being checked. If omitted,
then the ID Placeholder value is used by the server as the Unique Identifier.
|
|
Usage Limits Count, see 3.21
|
No
|
Specifies the number of Usage Limits Units to be protected to be checked
against server policy.
|
|
Cryptographic Usage Mask, see 3.19
|
No
|
Specifies the Cryptographic Usage for which the
client intends to use the object.
|
|
Lease Time, see 3.20
|
No
|
Specifies a Lease Time value that the Client is
asking the server to validate against server policy.
|
Table 192: Check Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes, unless a failure,
|
The Unique Identifier of the object.
|
|
Usage Limits Count, see 3.21
|
No
|
Returned by the Server if the Usage Limits value
specified in the Request Payload is larger than the value that the server
policy allows.
|
|
Cryptographic Usage Mask, see 3.19
|
No
|
Returned by the Server if the Cryptographic Usage
Mask specified in the Request Payload is rejected by the server for policy
violation.
|
|
Lease Time,
see 3.20
|
No
|
Returned by the Server if the Lease Time value in
the Request Payload is larger than a valid Lease Time that the server MAY
grant.
|
Table 193: Check Response Payload
4.11 Get
This operation requests that the server returns the
Managed Object specified by its Unique Identifier.
Only a single object is returned. The response contains
the Unique Identifier of the object, along with the object itself, which MAY be
wrapped using a wrapping key as specified in the request.
The following key format capabilities SHALL be assumed by
the client; restrictions apply when the client requests the server to return
an object in a particular format:
·
If a client registered a key in a given format, the server SHALL
be able to return the key during the Get operation in the same format that was
used when the key was registered.
·
Any other format conversion MAY be supported by the server.
If Key Format Type is specified to be PKCS#12 then
the response payload shall be a PKCS#12 container as specified by [RFC7292].
The Unique Identifier shall be that of a private key to be included in
the response. The container shall be protected using the Secret Data
object specified via the private key’s Secret Data Link. The current
certificate chain shall also be included as determined by using the
private key’s Public Key link to get the corresponding public key, and then
using that public key’s Certificate Link to get the base certificate, and then
using each certificate’s Certificate Link to build the certificate chain.
It is an error if there is more than one valid certificate chain.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
Determines the object being requested. If omitted,
then the ID Placeholder value is used by the server as the Unique Identifier.
|
|
Key Format Type, see 9.1.3.2.3
|
No
|
Determines the key format type to be returned.
|
|
Key Wrap Type, see 9.1.3.2.3
|
No
|
Determines the Key Wrap Type of the returned key
value.
|
|
Key Compression Type, see 9.1.3.2.2
|
No
|
Determines the compression method for elliptic curve
public keys.
|
|
Key Wrapping Specification, see 2.1.6
|
No
|
Specifies keys and other information for wrapping
the returned object. This field SHALL NOT be specified if the requested
object is a Template.
|
Table 194: Get Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Object Type, see 3.3
|
Yes
|
Type of object.
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the object.
|
|
Certificate, Symmetric Key, PGP Key, Private Key,
Public Key, Split Key, Template, Secret Data, or Opaque Object, see 2.1.22
|
Yes
|
The object being returned.
|
Table
195: Get Response Payload
This operation requests one or more attributes associated
with a Managed Object. The object is specified by its Unique Identifier, and
the attributes are specified by their name in the request. If a specified
attribute has multiple instances, then all instances are returned. If a
specified attribute does not exist (i.e., has no value), then it SHALL NOT be
present in the returned response. If no requested attributes exist, then the
response SHALL consist only of the Unique Identifier. If no attribute name is
specified in the request, all attributes SHALL be deemed to match the Get
Attributes request. The same attribute name SHALL NOT be present more than once
in a request.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
Determines the object whose attributes are being
requested. If omitted, then the ID Placeholder value is used by the server as
the Unique Identifier.
|
|
Attribute Name, see 2.1.1
|
No, MAY be repeated
|
Specifies the name of an attribute associated with
the object.
|
Table 196: Get Attributes Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the object.
|
|
Attribute, see 2.1.1
|
No, MAY be repeated
|
The requested attribute associated with the object.
|
Table
197: Get Attributes Response Payload
This operation requests a list of the attribute names
associated with a Managed Object. The object is specified by its Unique
Identifier.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
Determines the object whose attribute names are
being requested. If omitted, then the ID Placeholder value is used by the
server as the Unique Identifier.
|
Table 198: Get Attribute List Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the object.
|
|
Attribute Name, see 2.1.1
|
Yes, MAY be repeated
|
The names of the available attributes associated
with the object.
|
Table
199: Get Attribute List Response Payload
This operation requests the server to add a new attribute
instance to be associated with a Managed Object and set its value. The request
contains the Unique Identifier of the Managed Object to which the attribute
pertains, along with the attribute name and value. For single-instance
attributes, this is how the attribute value is created. For multi-instance
attributes, this is how the first and subsequent values are created. Existing
attribute values SHALL only be changed by the Modify Attribute operation.
Read-Only attributes SHALL NOT be added using the Add Attribute operation. The
Attribute Index SHALL NOT be specified in the request. The response returns a
new Attribute Index and the Attribute Index MAY be omitted if the index of the
added attribute instance is 0. Multiple Add Attribute requests MAY be included
in a single batched request to add multiple attributes.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
The Unique Identifier of the object. If omitted,
then the ID Placeholder value is used by the server as the Unique
Identifier.
|
|
Attribute, see 2.1.1
|
Yes
|
Specifies the attribute to be added as an attribute
for the object.
|
Table 200: Add Attribute Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the object.
|
|
Attribute, see 2.1.1
|
Yes
|
The added attribute associated with the object.
|
Table
201: Add Attribute Response Payload
This operation requests the server to modify the value of
an existing attribute instance associated with a Managed Object. The request
contains the Unique Identifier of the Managed Object whose attribute is to be
modified, the attribute name, the OPTIONAL Attribute Index, and the new value.
If no Attribute Index is specified in the request, then the Attribute Index
SHALL be assumed to be 0. Only existing attributes MAY be changed via this
operation. New attributes SHALL only be added by the Add Attribute operation.
Only the specified instance of the attribute SHALL be modified. Specifying an
Attribute Index for which there exists no Attribute object SHALL result in an
error. The response returns the modified Attribute (new value) and the
Attribute Index MAY be omitted if the index of the modified attribute instance
is 0. Multiple Modify Attribute requests MAY be included in a single batched
request to modify multiple attributes.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
The Unique Identifier of the object. If omitted,
then the ID Placeholder value is used by the server as the Unique Identifier.
|
|
Attribute, see 2.1.1
|
Yes
|
Specifies the attribute associated with the object
to be modified.
|
Table 202: Modify Attribute Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the object.
|
|
Attribute, see 2.1.1
|
Yes
|
The modified attribute associated with the object
with the new value.
|
Table 203: Modify Attribute Response Payload
4.16
Delete Attribute
This operation requests the server to delete an attribute
associated with a Managed Object. The request contains the Unique Identifier of
the Managed Object whose attribute is to be deleted, the attribute name, and
the OPTIONAL Attribute Index of the attribute. If no Attribute Index is
specified in the request, then the Attribute Index SHALL be assumed to be 0.
Attributes that are always REQUIRED to have a value SHALL never be deleted by
this operation. Attempting to delete a non-existent attribute or specifying an
Attribute Index for which there exists no Attribute Value SHALL result in an
error. The response returns the deleted Attribute and the Attribute Index MAY
be omitted if the index of the deleted attribute instance is 0. Multiple Delete
Attribute requests MAY be included in a single batched request to delete
multiple attributes.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
Determines the object whose attributes are being
deleted. If omitted, then the ID Placeholder value is used by the server as
the Unique Identifier.
|
|
Attribute Name, see 2.1.1
|
Yes
|
Specifies the name of the attribute associated with
the object to be deleted.
|
|
Attribute Index, see 2.1.1
|
No
|
Specifies the Index of the Attribute.
|
Table 204: Delete Attribute Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the object.
|
|
Attribute, see 2.1.1
|
Yes
|
The deleted attribute associated with the object.
|
Table 205: Delete Attribute Response Payload
This operation requests the server to obtain a new Lease
Time for a specified Managed Object. The Lease Time is an interval value
that determines when the client's internal cache of information about the
object expires and needs to be renewed. If the returned value of the lease time
is zero, then the server is indicating that no lease interval is effective, and
the client MAY use the object without any lease time limit. If a client's
lease expires, then the client SHALL NOT use the associated cryptographic
object until a new lease is obtained. If the server determines that a new lease
SHALL NOT be issued for the specified cryptographic object, then the server
SHALL respond to the Obtain Lease request with an error.
The response payload for the operation contains the
current value of the Last Change Date attribute for the object. This MAY be
used by the client to determine if any of the attributes cached by the client
need to be refreshed, by comparing this time to the time when the attributes
were previously obtained.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
Determines the object for which the lease is being
obtained. If omitted, then the ID Placeholder value is used by the server as
the Unique Identifier.
|
Table 206: Obtain Lease Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the object.
|
|
Lease Time, see 3.20
|
Yes
|
An interval (in seconds) that specifies the amount
of time that the object MAY be used until a new lease needs to be obtained.
|
|
Last Change Date, see 3.38
|
Yes
|
The date and time indicating when the latest change
was made to the contents or any attribute of the specified object.
|
Table
207: Obtain Lease Response Payload
This operation requests the server to obtain an allocation
from the current Usage Limits value to allow the client to use the Managed
Cryptographic Object for applying cryptographic protection. The allocation only
applies to Managed Cryptographic Objects that are able to be used for applying
protection (e.g., symmetric keys for encryption, private keys for signing,
etc.) and is only valid if the Managed Cryptographic Object has a Usage Limits
attribute. Usage for processing cryptographically protected information (e.g.,
decryption, verification, etc.) is not limited and is not able to be allocated.
A Managed Cryptographic Object that has a Usage Limits attribute SHALL NOT be
used by a client for applying cryptographic protection unless an allocation has
been obtained using this operation. The operation SHALL only be requested
during the time that protection is enabled for these objects (i.e., after the
Activation Date and before the Protect Stop Date). If the operation is
requested for an object that has no Usage Limits attribute, or is not an object
that MAY be used for applying cryptographic protection, then the server SHALL
return an error.
The field in the request specifies the number of units
that the client needs to protect. If the requested amount is not available or
if the Managed Object is not able to be used for applying cryptographic
protection at this time, then the server SHALL return an error. The server
SHALL assume that the entire allocated amount is going to be consumed. Once the
entire allocated amount has been consumed, the client SHALL NOT continue to use
the Managed Cryptographic Object for applying cryptographic protection until a
new allocation is obtained.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier,
see 3.1
|
No
|
Determines the object whose usage allocation is
being requested. If omitted, then the ID Placeholder is substituted by the
server.
|
|
Usage Limits Count, see Usage Limits Count field in 3.21
|
Yes
|
The number of Usage Limits Units to be protected.
|
Table 208: Get Usage Allocation Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier,
see 3.1
|
Yes
|
The Unique Identifier of the object.
|
Table 209: Get Usage Allocation Response Payload
4.19
Activate
This operation requests the server to activate a Managed
Cryptographic Object. The request SHALL NOT specify a Template object. The
operation SHALL only be performed on an object in the Pre-Active state and has
the effect of changing its state to Active, and setting its Activation Date to
the current date and time.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
Determines the object being activated. If omitted,
then the ID Placeholder value is used by the server as the Unique Identifier.
|
Table 210: Activate Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the object.
|
Table
211: Activate Response Payload
This operation requests the server to revoke a Managed
Cryptographic Object or an Opaque Object. The request SHALL NOT specify a
Template object. The request contains a reason for the revocation (e.g., “key
compromise”, “cessation of operation”, etc.). Special authentication and
authorization SHOULD be enforced to perform this request (see [KMIP-UG]). Only the object owner or an authorized
security officer SHOULD be allowed to issue this request. The operation has one
of two effects. If the revocation reason is “key compromise” or “CA compromise”, then the object is placed into
the “compromised” state; the Date is set to the current date and time; and the Compromise
Occurrence Date is set to the value (if provided) in the Revoke request and if
a value is not provided in the Revoke request then Compromise Occurrence Date
SHOULD be set to the Initial Date for the object. If the revocation
reason is neither “key compromise” nor “CA compromise”, the object is placed into
the “deactivated” state, and the Deactivation Date is set to the current date
and time.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
Determines the object being revoked. If omitted,
then the ID Placeholder value is used by the server as the Unique Identifier.
|
|
Revocation Reason, see 3.31
|
Yes
|
Specifies the reason for revocation.
|
|
Compromise Occurrence Date, see 3.29
|
No
|
SHOULD be specified if the Revocation Reason is 'key
compromise' or ‘CA
compromise’ and SHALL NOT be specified for other Revocation Reason
enumerations.
|
Table 212: Revoke Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the object.
|
Table
213: Revoke Response Payload
This operation is used to indicate to the server that the
key material for the specified Managed Object SHALL be destroyed. The meta-data
for the key material MAY be retained by the server (e.g., used to ensure that
an expired or revoked private signing key is no longer available). Special
authentication and authorization SHOULD be enforced to perform this request
(see [KMIP-UG]). Only the object owner or an
authorized security officer SHOULD be allowed to issue this request. If the
Unique Identifier specifies a Template object, then the object itself,
including all meta-data, SHALL be destroyed. Cryptographic Objects MAY only be
destroyed if they are in either Pre-Active or Deactivated state.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
Determines the object being destroyed. If omitted,
then the ID Placeholder value is used by the server as the Unique Identifier.
|
Table 214: Destroy Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the object.
|
Table
215: Destroy Response Payload
This operation is used to specify that a Managed Object
MAY be archived. The actual time when the object is archived, the location of
the archive, or level of archive hierarchy is determined by the policies within
the key management system and is not specified by the client. The request
contains the Unique Identifier of the Managed Object. Special authentication
and authorization SHOULD be enforced to perform this request (see [KMIP-UG]). Only the object owner or an authorized security
officer SHOULD be allowed to issue this request. This request is only an
indication from a client that, from its point of view, the key management
system MAY archive the object.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
Determines the object being archived. If omitted,
then the ID Placeholder value is used by the server as the Unique Identifier.
|
Table 216: Archive Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the object.
|
Table
217: Archive Response Payload
This operation is used to obtain access to a Managed
Object that has been archived. This request MAY need asynchronous polling to
obtain the response due to delays caused by retrieving the object from the
archive. Once the response is received, the object is now on-line, and MAY be
obtained (e.g., via a Get operation). Special authentication and authorization
SHOULD be enforced to perform this request (see [KMIP-UG]).
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
Determines the object being recovered. If omitted,
then the ID Placeholder value is used by the server as the Unique Identifier.
|
Table 218: Recover Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the object.
|
Table
219: Recover Response Payload
This operation requests the server to validate a
certificate chain and return information on its validity. Only a single
certificate chain SHALL be included in each request. Support for this operation
at the server is OPTIONAL. If the server does not support this operation, an
error SHALL be returned.
The request MAY contain a list of certificate objects,
and/or a list of Unique Identifiers that identify Managed Certificate objects.
Together, the two lists compose a certificate chain to be validated. The
request MAY also contain a date for which all certificates in the certificate
chain are REQUIRED to be valid.
The method or policy by which validation is conducted is a
decision of the server and is outside of the scope of this protocol. Likewise,
the order in which the supplied certificate chain is validated and the specification
of trust anchors used to terminate validation are also controlled by the
server.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Certificate, see 2.2.1
|
No, MAY be repeated
|
One or more Certificates.
|
|
Unique Identifier, see 3.1
|
No, MAY be repeated
|
One or more Unique Identifiers of Certificate
Objects.
|
|
Validity Date
|
No
|
A Date-Time object indicating when the certificate
chain needs to be valid. If omitted, the current date and time SHALL be
assumed.
|
Table 220: Validate Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Validity Indicator, see 9.1.3.2.23
|
Yes
|
An Enumeration object indicating whether the
certificate chain is valid, invalid, or unknown.
|
Table
221: Validate Response Payload
This operation is used by the client to interrogate the
server to determine its capabilities and/or protocol mechanisms. The Query
operation SHOULD be invocable by unauthenticated clients to interrogate server
features and functions. The Query Function field in the request SHALL
contain one or more of the following items:
·
Query Operations
·
Query Objects
·
Query Server Information
·
Query Application Namespaces
·
Query Extension List
·
Query Extension Map
·
Query Attestation Types
·
Query RNGs
·
Query Validations
·
Query Profiles
·
Query Capabilities
·
Query Client Registration Methods
The Operation fields in the response contain
Operation enumerated values, which SHALL list all the operations that the
server supports. If the request contains a Query Operations value in the Query
Function field, then these fields SHALL be returned in the response.
The Object Type fields in the response contain
Object Type enumerated values, which SHALL list all the object types that the
server supports. If the request contains a Query Objects value in the
Query Function field, then these fields SHALL be returned in the response.
The Server Information field in the response is a
structure containing vendor-specific fields and/or substructures. If the
request contains a Query Server Information value in the Query Function
field, then this field SHALL be returned in the response.
The Application Namespace fields in the response
contain the namespaces that the server SHALL generate values for if requested
by the client (see Section 3.36). These fields SHALL only be returned in the
response if the request contains a Query Application Namespaces value in the
Query Function field.
The Extension Information fields in the response
contain the descriptions of Objects with Item Tag values in the Extensions
range that are supported by the server (see Section 2.1.9). If the request
contains a Query Extension List and/or Query Extension Map value
in the Query Function field, then the Extensions Information fields SHALL be
returned in the response. If the Query Function field contains the Query
Extension Map value, then the Extension Tag and Extension Type fields SHALL be
specified in the Extension Information values. If both Query Extension List and
Query Extension Map are specified in the request, then only the response to
Query Extension Map SHALL be returned and the Query Extension List SHALL be
ignored.
The Attestation Type fields in the response contain
Attestation Type enumerated values, which SHALL list all the attestation types
that the server supports. If the request contains a Query Attestation Types
value in the Query Function field, then this field SHALL be returned in the
response if the server supports any Attestation Types.
The RNG Parameters fields in the response SHALL
list all the Random Number Generators that the server supports. If the request
contains a Query RNGs value in the Query Function field, then this field
SHALL be returned in the response. If the server is unable to specify details
of the RNG then it SHALL return an RNG Parameters with the RNG
Algorithm enumeration of Unspecified.
The Validation Information field in the response is
a structure containing details of each formal validation which the server
asserts. If the request contains a Query Validations value, then zero or
more Validation Information fields SHALL be returned in the response. A
server MAY elect to return no validation information in the response.
A Profile Information field in the response is a
structure containing details of the profiles that a server supports including
potentially how it supports that profile. If the request contains a Query Profiles
value in the Query Function field, then this field SHALL be returned in the
response if the server supports any Profiles.
The Capability Information fields in the response
contain details of the capability of the server.
The Client Registration Method fields in the
response contain Client Registration Method enumerated values, which SHALL list
all the client registration methods that the server supports. If the request
contains a Query Client Registration Methods value in the Query Function
field, then this field SHALL be returned in the response if the server supports
any Client Registration Methods.
Note that the response payload is empty if there are no
values to return.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Query Function, see 9.1.3.2.24
|
Yes, MAY be Repeated
|
Determines the information being queried.
|
Table 222: Query Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Operation, see 9.1.3.2.27
|
No, MAY be repeated
|
Specifies an Operation that is supported by the server.
|
|
Object Type, see 3.3
|
No, MAY be repeated
|
Specifies a Managed Object Type that is supported by the server.
|
|
Vendor Identification
|
No
|
SHALL be returned if Query Server Information is requested. The
Vendor Identification SHALL be a text string that uniquely identifies the
vendor.
|
|
Server Information
|
No
|
Contains vendor-specific information possibly be of
interest to the client.
|
|
Application Namespace, see 3.36
|
No, MAY be repeated
|
Specifies an Application Namespace supported by the
server.
|
|
Extension Information, see 2.1.9
|
No, MAY be repeated
|
SHALL be returned if Query Extension List or Query
Extension Map is requested and supported by the server.
|
|
Attestation Type, see 9.1.3.2.36
|
No, MAY be repeated
|
Specifies an Attestation Type that is supported by
the server.
|
|
RNG Parameters, see 2.1.18
|
No, MAY be repeated
|
Specifies the RNG that is supported by the server.
|
|
Profile Information, see 2.1.19
|
No, MAY be repeated
|
Specifies the Profiles that are supported by the
server.
|
|
Validation Information, see 2.1.20
|
No, MAY be repeated
|
Specifies the validations that are supported by the
server.
|
|
Capability
Information, see 2.1.21
|
No, MAY be repeated
|
Specifies the capabilities that are supported by the
server.
|
|
Client Registration Method, see 9.1.3.2.47
|
No, MAY be repeated
|
Specifies a Client Registration Method that is
supported by the server.
|
Table 223: Query Response Payload
This operation is used by the client to determine a list
of protocol versions that is supported by the server. The request payload
contains an OPTIONAL list of protocol versions that is supported by the client.
The protocol versions SHALL be ranked in decreasing order of preference.
The response payload contains a list of protocol versions
that are supported by the server. The protocol versions are ranked in
decreasing order of preference. If the client provides the server with a list
of supported protocol versions in the request payload, the server SHALL return
only the protocol versions that are supported by both the client and server.
The server SHOULD list all the protocol versions supported by both client and server.
If the protocol version specified in the request header is not specified in the
request payload and the server does not support any protocol version specified
in the request payload, the server SHALL return an empty list in the response
payload. If no protocol versions are specified in the request payload, the
server SHOULD return all the protocol versions that are supported by the
server.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Protocol Version, see 6.1
|
No, MAY be Repeated
|
The list of protocol versions supported by the
client ordered in decreasing order of preference.
|
Table 224: Discover Versions Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Protocol Version, see 6.1
|
No, MAY be repeated
|
The list of protocol versions supported by the
server ordered in decreasing order of preference.
|
Table 225: Discover Versions Response Payload
This operation requests the server to cancel an
outstanding asynchronous operation. The correlation value (see Section 6.8) of the original operation SHALL be specified in the request. The server SHALL
respond with a Cancellation Result that contains one of the following
values:
·
Canceled – The cancel operation succeeded in canceling the
pending operation.
·
Unable To Cancel – The cancel operation is unable to
cancel the pending operation.
·
Completed – The pending operation completed successfully
before the cancellation operation was able to cancel it.
·
Failed – The pending operation completed with a failure
before the cancellation operation was able to cancel it.
·
Unavailable – The specified correlation value did not
match any recently pending or completed asynchronous operations.
The response to this operation is not able to be
asynchronous.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Asynchronous Correlation Value, see 6.8
|
Yes
|
Specifies the request being canceled.
|
Table 226: Cancel Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Asynchronous Correlation Value, see 6.8
|
Yes
|
Specified in the request.
|
|
Cancellation Result, see 9.1.3.2.25
|
Yes
|
Enumeration indicating the result of the
cancellation.
|
Table
227: Cancel Response Payload
This operation is used to poll the server in order to
obtain the status of an outstanding asynchronous operation. The correlation
value (see Section 6.8) of the original operation SHALL be specified in the
request. The response to this operation SHALL NOT be asynchronous.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Asynchronous Correlation Value, see 6.8
|
Yes
|
Specifies the request being polled.
|
Table 228: Poll Request Payload
The server SHALL reply with one of two responses:
If the operation has not completed, the response SHALL
contain no payload and a Result Status of Pending.
If the operation has completed, the response SHALL contain
the appropriate payload for the operation. This response SHALL be identical to
the response that would have been sent if the operation had completed
synchronously.
4.29 Encrypt
This operation requests the server to perform an
encryption operation on the provided data using a Managed Cryptographic Object
as the key for the encryption operation.
The request contains information about the cryptographic
parameters (mode and padding method), the data to be encrypted, and the
IV/Counter/Nonce to use. The cryptographic parameters MAY be omitted from the
request as they can be specified as associated attributes of the Managed
Cryptographic Object. The IV/Counter/Nonce MAY also be omitted from the request
if the cryptographic parameters indicate that the server shall generate a
Random IV on behalf of the client or the encryption algorithm does not need an
IV/Counter/Nonce. The server does not store or otherwise manage the
IV/Counter/Nonce.
If the Managed Cryptographic Object referenced has a Usage
Limits attribute then the server SHALL obtain an allocation from the current
Usage Limits value prior to performing the encryption operation. If the
allocation is unable to be obtained the operation SHALL return with a result
status of Operation Failed and result reason of Permission Denied.
The response contains the Unique Identifier of the Managed
Cryptographic Object used as the key and the result of the encryption
operation.
The success or failure of the operation is indicated by
the Result Status (and if failure the Result Reason) in the response header.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
The Unique Identifier of the Managed Cryptographic Object that is the
key to use for the encryption operation. If omitted, then the ID Placeholder
value SHALL be used by the server as the Unique Identifier.
|
|
Cryptographic Parameters, see 3.6
|
No
|
The Cryptographic Parameters (Block Cipher Mode, Padding Method,
RandomIV) corresponding to the particular encryption method requested. If
omitted then the Cryptographic Parameters associated with the Managed
Cryptographic Object with the lowest Attribute Index SHALL be used.
If there are no Cryptographic Parameters associated with the Managed
Cryptographic Object and the algorithm requires parameters then the operation
SHALL return with a Result Status of Operation Failed.
|
|
Data
|
Yes for single-part. No for multi-part.
|
The data to be encrypted (as a Byte String).
|
|
IV/Counter/Nonce
|
No
|
The initialization vector, counter or nonce to be used (where
appropriate).
|
|
Correlation Value, see 2.1.15
|
No
|
Specifies the existing stream or by-parts cryptographic operation (as
returned from a previous call to this operation).
|
|
Init Indicator, see 2.1.16
|
No
|
Initial operation as Boolean
|
|
Final Indicator, see 2.1.17
|
No
|
Final operation as Boolean
|
|
Authenticated Encryption Additional Data, see 2.1.22
|
No
|
Any additional data to be authenticated via the Authenticated
Encryption Tag. If supplied in multi-part encryption, this data MUST be
supplied on the initial Encrypt request
|
Table 229: Encrypt Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the Managed Cryptographic Object that was the
key used for the encryption operation.
|
|
Data
|
Yes for single-part. No for multi-part.
|
The encrypted data (as a Byte String).
|
|
IV/Counter/Nonce
|
No
|
The value used if the Cryptographic Parameters specified Random IV and
the IV/Counter/Nonce value was not provided in the request and the algorithm
requires the provision of an IV/Counter/Nonce.
|
|
Correlation Value, see 2.1.15
|
No
|
Specifies the stream or by-parts value to be provided in subsequent
calls to this operation for performing cryptographic operations.
|
|
Authenticated Encryption Tag, see 2.1.23
|
No
|
Specifies the tag that will be needed to authenticate the decrypted
data. Only returned on completion of the encryption of the last of the
plaintext by an authenticated encryption cipher.
|
Table 230: Encrypt Response Payload
This operation requests the server to perform a decryption
operation on the provided data using a Managed Cryptographic Object as the key
for the decryption operation.
The request contains information about the cryptographic
parameters (mode and padding method), the data to be decrypted, and the
IV/Counter/Nonce to use. The cryptographic parameters MAY be omitted from the
request as they can be specified as associated attributes of the Managed
Cryptographic Object. The initialization vector/counter/nonce MAY also be
omitted from the request if the algorithm does not use an IV/Counter/Nonce.
The response contains the Unique Identifier of the Managed
Cryptographic Object used as the key and the result of the decryption
operation.
The success or failure of the operation is indicated by
the Result Status (and if failure the Result Reason) in the response header.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
The Unique Identifier of the Managed Cryptographic Object that is the
key to use for the decryption operation. If omitted, then the ID Placeholder
value SHALL be used by the server as the Unique Identifier.
|
|
Cryptographic Parameters, see 3.6
|
No
|
The Cryptographic Parameters (Block Cipher Mode, Padding Method)
corresponding to the particular decryption method requested. If omitted then
the Cryptographic Parameters associated with the Managed Cryptographic Object
with the lowest Attribute Index SHALL be used.
If there are no Cryptographic Parameters associated with the Managed
Cryptographic Object and the algorithm requires parameters then the operation
SHALL return with a Result Status of Operation Failed.
|
|
Data
|
Yes for single-part. No for multi-part.
|
The data to be decrypted (as a Byte String).
|
|
IV/Counter/Nonce
|
No
|
The initialization vector, counter or nonce to be used (where
appropriate).
|
|
Correlation Value, see 2.1.15
|
No
|
Specifies the existing stream or by-parts cryptographic operation (as
returned from a previous call to this operation).
|
|
Init Indicator, see 2.1.16
|
No
|
Initial operation as Boolean
|
|
Final Indicator, see 2.1.17
|
No
|
Final operation as Boolean
|
|
Authenticated Encryption Additional Data, see 2.1.22
|
No
|
Additional data to be authenticated via the Authenticated Encryption
Tag. If supplied in multi-part decryption, this data MUST be supplied on the
initial Decrypt request
|
|
Authenticated Encryption Tag, see 2.1.23
|
No
|
Specifies the tag that will be needed to authenticate the decrypted
data. If supplied in multi-part decryption, this data MUST be supplied on
the initial Decrypt request
|
Table 231: Decrypt Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the Managed Cryptographic Object that is the
key used for the decryption operation.
|
|
Data
|
Yes for single-part. No for multi-part.
|
The decrypted data (as a Byte String).
|
|
Correlation Value, see 2.1.15
|
No
|
Specifies the stream or by-parts value to be provided in subsequent
calls to this operation for performing cryptographic operations.
|
Table 232: Decrypt Response Payload
This operation requests the server to perform a signature
operation on the provided data using a Managed Cryptographic Object as the key
for the signature operation.
The request contains information about the cryptographic
parameters (digital signature algorithm or cryptographic algorithm and hash
algorithm) and the data to be signed. The cryptographic parameters MAY be
omitted from the request as they can be specified as associated attributes of
the Managed Cryptographic Object.
If the Managed Cryptographic Object referenced has a Usage
Limits attribute then the server SHALL obtain an allocation from the current
Usage Limits value prior to performing the signing operation. If the allocation
is unable to be obtained the operation SHALL return with a result status of
Operation Failed and result reason of Permission Denied.
The response contains the Unique Identifier of the Managed
Cryptographic Object used as the key and the result of the signature operation.
The success or failure of the operation is indicated by
the Result Status (and if failure the Result Reason) in the response header.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
The Unique Identifier of the Managed Cryptographic Object that is the
key to use for the signature operation. If omitted, then the ID Placeholder
value SHALL be used by the server as the Unique Identifier.
|
|
Cryptographic Parameters, see 3.6
|
No
|
The Cryptographic Parameters (Digital Signature Algorithm or
Cryptographic Algorithm and Hashing Algorithm) corresponding to the
particular signature generation method requested. If omitted then the
Cryptographic Parameters associated with the Managed Cryptographic Object
with the lowest Attribute Index SHALL be used.
If there are no Cryptographic Parameters associated with the Managed
Cryptographic Object and the algorithm requires parameters then the operation
SHALL return with a Result Status of Operation Failed.
|
|
Data
|
Yes for single-part, unless Digested Data is supplied.. No for
multi-part.
|
The data to be signed (as a Byte String).
|
|
Digested Data
|
No
|
The digested data to be signed (as a Byte String).
|
|
Correlation Value, see 2.1.15
|
No
|
Specifies the existing stream or by-parts cryptographic operation (as
returned from a previous call to this operation).
|
|
Init Indicator, see 2.1.16
|
No
|
Initial operation as Boolean
|
|
Final Indicator, see 2.1.17
|
No
|
Final operation as Boolean
|
Table 233: Sign Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the Managed Cryptographic Object that is the
key used for the signature operation.
|
|
Signature Data
|
Yes for single-part. No for multi-part.
|
The signed data (as a Byte String).
|
|
Correlation Value, see 2.1.15
|
No
|
Specifies the stream or by-parts value to be provided in subsequent
calls to this operation for performing cryptographic operations.
|
Table 234: Sign Response Payload
This operation requests the server to perform a signature
verify operation on the provided data using a Managed Cryptographic Object as
the key for the signature verification operation.
The request contains information about the cryptographic
parameters (digital signature algorithm or cryptographic algorithm and hash
algorithm) and the signature to be verified and MAY contain the data that was
passed to the signing operation (for those algorithms which need the original
data to verify a signature).
The cryptographic parameters MAY be omitted from the
request as they can be specified as associated attributes of the Managed
Cryptographic Object.
The response contains the Unique Identifier of the Managed
Cryptographic Object used as the key and the OPTIONAL data recovered from the
signature (for those signature algorithms where data recovery from the
signature is supported). The validity of the signature is indicated by the
Validity Indicator field.
The success or failure of the operation is indicated by
the Result Status (and if failure the Result Reason) in the response header.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
The Unique Identifier of the Managed Cryptographic Object that is the
key to use for the signature verify operation. If omitted, then the ID
Placeholder value SHALL be used by the server as the Unique Identifier.
|
|
Cryptographic Parameters, see 3.6
|
No
|
The Cryptographic Parameters (Digital Signature Algorithm or
Cryptographic Algorithm and Hashing Algorithm) corresponding to the
particular signature verification method requested. If omitted then the
Cryptographic Parameters associated with the Managed Cryptographic Object
with the lowest Attribute Index SHALL be used.
If there are no Cryptographic Parameters associated with the Managed
Cryptographic Object and the algorithm requires parameters then the operation
SHALL return with a Result Status of Operation Failed.
|
|
Data
|
No
|
The data that was signed (as a Byte String).
|
|
Digested Data
|
No
|
The digested data to be verified (as a Byte String)
|
|
Signature Data
|
Yes for single-part. No for multi-part.
|
The signature to be verified (as a Byte String).
|
|
Correlation Value, see 2.1.15
|
No
|
Specifies the existing stream or by-parts cryptographic operation (as
returned from a previous call to this operation).
|
|
Init Indicator, see 2.1.16
|
No
|
Initial operation as Boolean
|
|
Final Indicator, see 2.1.17
|
No
|
Final operation as Boolean
|
Table 235: Signature Verify Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the Managed Cryptographic Object that is the
key used for the verification operation.
|
|
Validity Indicator, see 9.1.3.2.23
|
Yes
|
An Enumeration object indicating whether the signature is valid,
invalid, or unknown.
|
|
Data
|
No
|
The OPTIONAL recovered data (as a Byte String) for those signature
algorithms where data recovery from the signature is supported.
|
|
Correlation Value, see 2.1.15
|
No
|
Specifies the stream or by-parts value to be provided in subsequent
calls to this operation for performing cryptographic operations.
|
Table 236: Signature Verify Response Payload
This operation requests the server to perform message
authentication code (MAC) operation on the provided data using a Managed
Cryptographic Object as the key for the MAC operation.
The request contains information about the cryptographic
parameters (cryptographic algorithm) and the data to be MACed. The
cryptographic parameters MAY be omitted from the request as they can be
specified as associated attributes of the Managed Cryptographic Object.
The response contains the Unique Identifier of the Managed
Cryptographic Object used as the key and the result of the MAC operation.
The success or failure of the operation is indicated by
the Result Status (and if failure the Result Reason) in the response header.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
The Unique Identifier of the Managed Cryptographic Object that is the
key to use for the MAC operation. If omitted, then the ID Placeholder value
SHALL be used by the server as the Unique Identifier.
|
|
Cryptographic Parameters, see 3.6
|
No
|
The Cryptographic Parameters (Cryptographic Algorithm) corresponding
to the particular MAC method requested. If omitted then the Cryptographic
Parameters associated with the Managed Cryptographic Object with the lowest
Attribute Index SHALL be used.
If there are no Cryptographic Parameters associated with the Managed
Cryptographic Object and the algorithm requires parameters then the operation
SHALL return with a Result Status of Operation Failed.
|
|
Data
|
Yes for single-part. No for multi-part.
|
The data to be MACed (as a Byte String).
|
|
Correlation Value, see 2.1.15
|
No
|
Specifies the existing stream or by-parts cryptographic operation (as
returned from a previous call to this operation).
|
|
Init Indicator, see 2.1.16
|
No
|
Initial operation as Boolean
|
|
Final Indicator, see 2.1.17
|
No
|
Final operation as Boolean
|
Table 237: MAC Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the Managed Cryptographic Object that is the
key used for the MAC operation.
|
|
MAC Data
|
Yes for single-part. No for multi-part.
|
The data MACed (as a Byte String).
|
|
Correlation Value, see 2.1.15
|
No
|
Specifies the stream or by-parts value to be provided in subsequent
calls to this operation for performing cryptographic operations.
|
Table 238: MAC Response Payload
This operation requests the server to perform message
authentication code (MAC) verify operation on the provided data using a Managed
Cryptographic Object as the key for the MAC verify operation.
The request contains information about the cryptographic
parameters (cryptographic algorithm) and the data to be MAC verified and MAY
contain the data that was passed to the MAC operation (for those algorithms
which need the original data to verify a MAC). The cryptographic parameters MAY
be omitted from the request as they can be specified as associated attributes
of the Managed Cryptographic Object.
The response contains the Unique Identifier of the Managed
Cryptographic Object used as the key and the result of the MAC verify
operation. The validity of the MAC is indicated by the Validity Indicator
field.
The success or failure of the operation is indicated by
the Result Status (and if failure the Result Reason) in the response header.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
The Unique Identifier of the Managed Cryptographic Object that is the
key to use for the MAC verify operation. If omitted, then the ID Placeholder
value SHALL be used by the server as the Unique Identifier.
|
|
Cryptographic Parameters, see 3.6
|
No
|
The Cryptographic Parameters (Cryptographic Algorithm) corresponding
to the particular MAC method requested. If omitted then the Cryptographic
Parameters associated with the Managed Cryptographic Object with the lowest
Attribute Index SHALL be used.
If there are no Cryptographic Parameters associated with the Managed
Cryptographic Object and the algorithm requires parameters then the operation
SHALL return with a Result Status of Operation Failed.
|
|
Data
|
No
|
The data that was MACed (as a Byte String).
|
|
MAC Data
|
Yes for single-part. No for multi-part.
|
The data to be MAC verified (as a Byte String).
|
|
Correlation Value, see 2.1.15
|
No
|
Specifies the existing stream or by-parts cryptographic operation (as
returned from a previous call to this operation).
|
|
Init Indicator, see 2.1.16
|
No
|
Initial operation as Boolean
|
|
Final Indicator, see 2.1.17
|
No
|
Final operation as Boolean
|
Table 239: MAC Verify Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the Managed Cryptographic Object that is the
key used for the verification operation.
|
|
Validity Indicator, see 9.1.3.2.23
|
Yes
|
An Enumeration object indicating whether the MAC is valid, invalid, or
unknown.
|
|
Correlation Value, see 2.1.15
|
No
|
Specifies the stream or by-parts value to be provided in subsequent
calls to this operation for performing cryptographic operations.
|
Table 240: MAC Verify Response Payload
This operation requests the server to return output from a
Random Number Generator (RNG).
The request contains the quantity of output requested.
The response contains the RNG output.
The success or failure of the operation is indicated by
the Result Status (and if failure the Result Reason) in the response header.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Data Length
|
Yes
|
The amount of random number generator output to be
returned (in bytes).
|
Table 241: RNG Retrieve Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Data
|
Yes
|
The random number generator output.
|
Table 242: RNG Retrieve Response Payload
This operation requests the server to seed a Random Number
Generator.
The request contains the seeding material.
The response contains the amount of seed data used.
The success or failure of the operation is indicated by
the Result Status (and if failure the Result Reason) in the response header.
The server MAY elect to ignore the information provided by
the client (i.e. not accept the seeding material) and MAY indicate this to the
client by returning zero as the value in the Data Length response. A client
SHALL NOT consider a response from a server which does not use the provided
data as an error.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Data
|
Yes
|
The data to be provided as a seed to the random
number generator.
|
Table 243: RNG Seed Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Data Length
|
Yes
|
The amount of seed data used (in bytes).
|
Table 244: RNG Seed Response Payload
This operation requests the server to perform a hash
operation on the data provided.
The request contains information about the cryptographic
parameters (hash algorithm) and the data to be hashed.
The response contains the result of the hash operation.
The success or failure of the operation is indicated by
the Result Status (and if failure the Result Reason) in the response header.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Cryptographic Parameters, see 3.6
|
Yes
|
The Cryptographic Parameters (Hashing Algorithm) corresponding to the
particular hash method requested.
|
|
Data
|
Yes for single-part. No for multi-part.
|
The data to be hashed (as a Byte String).
|
|
Correlation Value, see 2.1.15
|
No
|
Specifies the existing stream or by-parts cryptographic operation (as
returned from a previous call to this operation).
|
|
Init Indicator, see 2.1.16
|
No
|
Initial operation as Boolean
|
|
Final Indicator, see 2.1.17
|
No
|
Final operation as Boolean
|
Table 245: Hash Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Data
|
Yes for single-part. No for multi-part.
|
The hashed data (as a Byte String).
|
|
Correlation Value, see 2.1.15
|
No
|
Specifies the stream or by-parts value to be provided in subsequent
calls to this operation for performing cryptographic operations.
|
Table 246: Hash Response Payload
This operation requests the server to generate a new split
key and register all the splits as individual new Managed Cryptographic
Objects.
The request contains attributes to be assigned to the
objects (e.g., Split Key Parts, Split Key Threshold, Split Key Method,
Cryptographic Algorithm, Cryptographic Length, etc.). The request MAY contain
the Unique Identifier of an existing cryptographic object that the client
requests be split by the server. If the attributes supplied in the request do
not match those of the key supplied, the attributes of the key take precedence.
The response contains the Unique Identifiers of all created
objects. The ID Placeholder value SHALL be set to the Unique Identifier of the
split whose Key Part Identifier is 1.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Object Type, see 3.3
|
Yes
|
Determines the type of object to be created.
|
|
Unique Identifier, see 3.1
|
No
|
The Unique Identifier of the key to be split (if applicable).
|
|
Split Key Parts
|
Yes
|
The total number of parts.
|
|
Split Key Threshold
|
Yes
|
The minimum number of parts needed to reconstruct the entire key.
|
|
Split Key Method
|
Yes
|
|
|
Prime Field Size
|
No
|
|
|
Template-Attribute, see 2.1.7.14
|
Yes
|
Specifies desired object attributes using templates and/or individual
attributes.
|
Table 247: Create Split Key Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes, MAY be repeated
|
The list of Unique Identifiers of the newly created objects.
|
|
Template-Attribute, see 2.1.7.14
|
No
|
An OPTIONAL list of object attributes with values that were not
specified in the request, but have been implicitly set by the key management system.
|
Table 248: Create Split Key Response Payload
This operation requests the server to combine a list of
Split Keys into a single Managed Cryptographic Object. The number of Unique
Identifiers in the request SHALL be at least the value of the Split Key
Threshold defined in the Split Keys.
The request contains the Object Type of the Managed
Cryptographic Object that the client requests the Split Key Objects be combined
to form. If the Object Type formed is Secret Data, the client MAY include the
Secret Data Type in the request.
The response contains the Unique Identifier of the object
obtained by combining the Split Keys. The server SHALL copy the Unique
Identifier returned by this operation into the ID Placeholder variable.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Object Type, see 3.3
|
Yes
|
Determines the type of object to be created.
|
|
Unique Identifier, see 3.1
|
Yes, MAY be repeated
|
Determines the Split Keys to be combined to form the object returned
by the server. The minimum number of identifiers is specified by the Split
Key Threshold field in each of the Split Keys.
|
|
Secret Data Type
|
No
|
Determines which Secret Data type the Split Keys form.
|
|
Template-Attribute, see 2.1.7.14
|
No
|
Specifies desired object attributes using templates and/or individual
attributes.
|
Table 249: Join Split Key Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the object obtained by combining the Split
Keys.
|
|
Template-Attribute, see 2.1.7.14
|
No
|
An OPTIONAL list of object attributes with values that were not
specified in the request, but have been implicitly set by the key management system.
|
Table 250: Join Split Key Response Payload
This operation requests that the server returns a Managed
Object specified by its Unique Identifier, together with its attributes.
The Key Format Type, Key Wrap Type, Key Compression Type and
Key Wrapping Specification SHALL have the same semantics as for the Get operation.
If the Managed Object has been Destroyed then the key material for the
specified managed object SHALL not be returned in the response.
The server SHALL copy the Unique Identifier returned by this
operations into the ID Placeholder variable. Special authentication and
authorization SHOULD be enforced to perform this request (see [KMIP-UG]).
Only the object owner or an authorized security officer
SHOULD be allowed to issue this request.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
No
|
Determines the object being requested. If omitted, then the
IDPlaceholder value is used by the server as the Unique Identifier.
|
|
Key Format Type, see 9.1.3.2.3
|
No
|
Determines the key format type to be returned.
|
|
Key Wrap Type, see 9.1.3.2.3
|
No
|
Determines the Key Wrap Type of the returned key value.
|
|
Key Compression Type, see 9.1.3.2.2
|
No
|
Determines the compression method for elliptic curve public keys.
|
|
Key Wrapping Specification, see 2.1.6
|
No
|
Specifies keys and other information for wrapping the returned
object..
|
Table 251: Export Request
Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Object Type, see 3.3
|
Yes
|
Type of object
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the object.
|
|
Attribute, see 2.1.1
|
Yes, is repeated
|
All of the object’s Attributes.
|
|
Certificate, Symmetric Key, PGP Key, Private Key, Public Key, Split
Key, Template, Secret Data, or Opaque Object, see 2.1.22
|
Yes
|
The object value being returned, in the same manner as the Get
operation.
|
Table 252: Export Response
Payload
This operation requests the server to Import a Managed
Object specified by its Unique Identifier. The request specifies the object
being imported and all the attributes to be assigned to the object. The
attribute rules for each attribute for “Initially set by” and “When implicitly
set” SHALL NOT be enforced as all attributes MUST be set to the supplied values
rather than any server generated values.
Special authentication and authorization SHOULD be enforced
to perform this request (see [KMIP-UG]). Only the object owner or an
authorized security officer SHOULD be allowed to issue this request.
The response contains the Unique Identifier provided in the
request or assigned by the server. The server SHALL copy the Unique Identifier
returned by this operations into the ID Placeholder variable.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the object to be imported
|
|
Replace Existing
|
No
|
A Boolean. If specified and true then any existing object with the
same Unique Identifier SHALL be replaced by this operation. If absent or
false then the operation SHALL fail if there is an existing object with the
same Unique Identifier.
|
|
Key Wrap Type, see 9.1.3.2.48
|
No
|
If Not Wrapped then the server SHALL unwrap the object before storing
it, and return an error if the wrapping key is not available. Otherwise the
server SHALL store the object as provided.
|
|
Attribute, see 2.1.1
|
Yes, is repeated
|
All of the object’s Attributes.
|
|
Certificate, Symmetric Key, PGP Key, Private Key, Public Key, Split
Key, Template, Secret Data, or Opaque Object, see 2.1.22
|
Yes
|
The object value being imported, in the same manner as the Register
operation.
|
Table 253: Export Request
Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the object.
|
Table 254: Export Response
Payload
Server-to-client operations are used by servers to send
information or Managed Cryptographic Objects to clients via means outside of
the normal client-server request-response mechanism. These operations are used
to send Managed Cryptographic Objects directly to clients without a specific
request from the client.
5.1
Notify
This operation is used to notify a client of events that
resulted in changes to attributes of an object. This operation is only ever
sent by a server to a client via means outside of the normal client
request/response protocol, using information known to the server via
unspecified configuration or administrative mechanisms. It contains the Unique
Identifier of the object to which the notification applies, and a list of the
attributes whose changed values have triggered the notification. The message uses
the same format as a Request message (see 7.1, Table 280), except that the
Maximum Response Size, Asynchronous Indicator, Batch Error Continuation Option,
and Batch Order Option fields are not allowed. The client SHALL send a response
in the form of a Response Message (see 7.1, Table 281) containing no payload,
unless both the client and server have prior knowledge (obtained via out-of-band
mechanisms) that the client is not able to respond.
|
Message Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the object.
|
|
Attribute, see 3
|
Yes, MAY be repeated
|
The attributes that have changed. This includes at
least the Last Change Date attribute. In case an attribute was deleted, the
Attribute structure (see 2.1.1) in
question SHALL NOT contain the Attribute Value field.
|
Table
255: Notify Message Payload
This operation is used to “push” Managed Cryptographic
Objects to clients. This operation is only ever sent by a server to a client
via means outside of the normal client request/response protocol, using
information known to the server via unspecified configuration or administrative
mechanisms. It contains the Unique Identifier of the object that is being sent,
and the object itself. The message uses the same format as a Request message
(see 7.1, Table 280), except that the Maximum Response Size, Asynchronous
Indicator, Batch Error Continuation Option, and Batch Order Option fields are
not allowed. The client SHALL send a response in the form of a Response Message
(see 7.1, Table 281) containing no payload, unless both the client and server
have prior knowledge (obtained via out-of-band mechanisms) that the client is
not able to respond.
The Put Function field indicates whether the object
being “pushed” is a new object, or is a replacement for an object already known
to the client (e.g., when pushing a certificate to replace one that is about to
expire, the Put Function field would be set to indicate replacement, and
the Unique Identifier of the expiring certificate would be placed in the Replaced
Unique Identifier field). The Put Function SHALL contain one of the
following values:
·
New – which indicates that the object is not a replacement
for another object.
·
Replace – which indicates that the object is a replacement
for another object, and that the Replaced Unique Identifier field is present
and contains the identification of the replaced object. In case the object with
the Replaced Unique Identifier does not exist at the client, the client SHALL
interpret this as if the Put Function contained the value New.
The Attribute field contains one or more attributes that
the server is sending along with the object. The server MAY include attributes
with the object to specify how the object is to be used by the client. The
server MAY include a Lease Time attribute that grants a lease to the client.
If the Managed Object is a wrapped key, then the key
wrapping specification SHALL be exchanged prior to the transfer via out-of-band
mechanisms.
|
Message Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Unique Identifier, see 3.1
|
Yes
|
The Unique Identifier of the object.
|
|
Put Function, see 9.1.3.2.26
|
Yes
|
Indicates function for Put message.
|
|
Replaced Unique Identifier, see 3.1
|
No
|
Unique Identifier of the replaced object. SHALL be
present if the Put Function is Replace.
|
|
Certificate, Symmetric Key, Private Key, Public Key,
Split Key, Template, Secret Data, or Opaque Object, see 2.1.22
|
Yes
|
The object being sent to the client.
|
|
Attribute, see 3
|
No, MAY be repeated
|
The additional attributes that the server wishes to
send with the object.
|
Table
256: Put Message Payload
This operation is used by the server to interrogate the
client to determine its capabilities and/or protocol mechanisms. The Query
operation SHOULD be invocable by unauthenticated servers to interrogate client
features and functions. The Query Function field in the request SHALL
contain one or more of the following items:
·
Query Operations
·
Query Objects
·
Query Server Information
·
Query Extension List
·
Query Extension Map
·
Query Attestation Types
·
Query RNGs
·
Query Validations
·
Query Profiles
·
Query Capabilities
·
Query Client Registration Methods
The Operation fields in the response contain
Operation enumerated values, which SHALL list all the operations that the
client supports. If the request contains a Query Operations value in the Query
Function field, then these fields SHALL be returned in the response.
The Object Type fields in the response contain
Object Type enumerated values, which SHALL list all the object types that the
client supports. If the request contains a Query Objects value in the
Query Function field, then these fields SHALL be returned in the response.
The Server Information field in the response is a
structure containing vendor-specific fields and/or substructures. If the
request contains a Query Server Information value in the Query Function
field, then this field SHALL be returned in the response.
The Extension Information fields in the response
contain the descriptions of Objects with Item Tag values in the Extensions
range that are supported by the server (see Section 2.1.9). If the request
contains a Query Extension List and/or Query Extension Map value
in the Query Function field, then the Extensions Information fields SHALL be
returned in the response. If the Query Function field contains the Query
Extension Map value, then the Extension Tag and Extension Type fields SHALL be
specified in the Extension Information values. If both Query Extension List and
Query Extension Map are specified in the request, then only the response to
Query Extension Map SHALL be returned and the Query Extension List SHALL be
ignored.
The Attestation Type fields in the response contain
Attestation Type enumerated values, which SHALL list all the attestation types
that the client supports. If the request contains a Query Attestation Types
value in the Query Function field, then this field SHALL be returned in the
response if the server supports any Attestation Types.
The RNG Parameters fields in the response SHALL
list all the Random Number Generators that the client supports. If the request
contains a Query RNGs value in the Query Function field, then this field
SHALL be returned in the response. If the server is unable to specify details
of the RNG then it SHALL return an RNG Parameters with the RNG
Algorithm enumeration of Unspecified.
The Validation Information field in the response is
a structure containing details of each formal validation which the client
asserts. If the request contains a Query Validations value, then zero or
more Validation Information fields SHALL be returned in the response. A
client MAY elect to return no validation information in the response.
A Profile Information field in the response is a
structure containing details of the profiles that a client supports including
potentially how it supports that profile. If the request contains a Query Profiles
value in the Query Function field, then this field SHALL be returned in the
response if the client supports any Profiles.
The Capability Information fields in the response
contain details of the capability of the client.
The Client Registration Method fields in the
response contain Client Registration Method enumerated values, which SHALL list
all the client registration methods that the client supports. If the request
contains a Query Client Registration Methods value in the Query Function
field, then this field SHALL be returned in the response if the server supports
any Client Registration Methods.
Note that the response payload is empty if there are no
values to return.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Query Function, see 9.1.3.2.24
|
Yes, MAY be Repeated
|
Determines the information being queried.
|
Table 257: Query Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Operation, see 9.1.3.2.27
|
No, MAY be repeated
|
Specifies an Operation that is supported by the
client.
|
|
Object Type, see 3.3
|
No, MAY be repeated
|
Specifies a Managed Object Type that is supported by
the client.
|
|
Vendor Identification
|
No
|
SHALL be returned if Query Server Information is
requested. The Vendor Identification SHALL be a text string that uniquely
identifies the vendor.
|
|
Server Information
|
No
|
Contains vendor-specific information in response to
the Query.
|
|
Extension Information, see 2.1.9
|
No, MAY be repeated
|
SHALL be returned if Query Extension List or Query
Extension Map is requested and supported by the client.
|
|
Attestation Type, see 9.1.3.2.36
|
No, MAY be repeated
|
Specifies an Attestation Type that is supported by
the client.
|
|
RNG Parameters, see 2.1.18
|
No, MAY be repeated
|
Specifies the RNG that is supported by the client.
|
|
Profile Information, see 2.1.19
|
No, MAY be repeated
|
Specifies the Profiles that are supported by the client.
|
|
Validation Information, see 2.1.20
|
No, MAY be repeated
|
Specifies the validations that are supported by the client.
|
|
Capability Information, see 2.1.21
|
No, MAY be repeated
|
Specifies the capabilities that are supported by the
client.
|
|
Client Registration Method, see 9.1.3.2.47
|
No, MAY be repeated
|
Specifies a Client Registration Method that is
supported by the client.
|
Table 258: Query Response Payload
5.4 Discover
Versions
This operation is used by the
server to determine a list of protocol versions that is supported by the
client. The request payload
contains an OPTIONAL list of protocol versions that is supported by the server.
The protocol versions SHALL be ranked in
decreasing order of preference.
The response payload contains a list of protocol versions
that are supported by the client. The protocol versions
are ranked in decreasing order of preference. If the server provides the client
with a list of supported protocol
versions in the request payload, the client SHALL return only the protocol versions that are supported by both the
client and server. The client SHOULD list all the protocol versions supported by both client and server.
If the protocol version specified in the request header is not specified in the request payload and the
client does not support any protocol version specified in the request payload, the client SHALL return an
empty list in the response payload. If no protocol versions are specified in the request payload, the
client SHOULD return all the protocol versions that are supported by the client.
|
Request Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Protocol Version, see 6.1
|
No, MAY be Repeated
|
The list of protocol versions supported by the
server ordered in decreasing order of preference.
|
Table 259: Discover Versions Request Payload
|
Response Payload
|
|
Object
|
REQUIRED
|
Description
|
|
Protocol Version, see 6.1
|
No, MAY be repeated
|
The list of protocol versions supported by the
client ordered in decreasing order of preference.
|
Table 260: Discover Versions Response Payload
The messages in the protocol consist of a message header,
one or more batch items (which contain OPTIONAL message payloads), and OPTIONAL
message extensions. The message headers contain fields whose presence is
determined by the protocol features used (e.g., asynchronous responses). The
field contents are also determined by whether the message is a request or a
response. The message payload is determined by the specific operation being
requested or to which is being replied.
The message headers are structures that contain some of
the following objects.
6.1
Protocol Version
This field contains the version number of the protocol,
ensuring that the protocol is fully understood by both communicating parties.
The version number SHALL be specified in two parts, major and minor. Servers
and clients SHALL support backward compatibility with versions of the protocol
with the same major version. Support for backward compatibility with different
major versions is OPTIONAL.
|
Object
|
Encoding
|
|
Protocol Version
|
Structure
|
|
Protocol Version Major
|
Integer
|
|
Protocol Version Minor
|
Integer
|
Table
261: Protocol Version Structure in Message Header
This field indicates the operation being requested or the
operation for which the response is being returned. The operations are defined
in Sections 4 and 5.
|
Object
|
Encoding
|
|
Operation
|
Enumeration, see 9.1.3.2.27
|
Table
262: Operation in Batch Item
This is an OPTIONAL field contained in a request message,
and is used to indicate the maximum size of a response, in bytes, that the
requester SHALL be able to handle. It SHOULD only be sent in requests that
possibly return large replies.
|
Object
|
Encoding
|
|
Maximum Response Size
|
Integer
|
Table
263: Maximum Response Size in Message Request Header
This is an OPTIONAL field contained in a request, and is
used for correlation between requests and responses. If a request has a Unique
Batch Item ID, then responses to that request SHALL have the same Unique
Batch Item ID.
|
Object
|
Encoding
|
|
Unique Batch Item ID
|
Byte String
|
Table
264: Unique Batch Item ID in Batch Item
This is an OPTIONAL field contained in a client request.
It is REQUIRED in a server request and response. It is used for time stamping,
and MAY be used to enforce reasonable time usage at a client (e.g., a server
MAY choose to reject a request if a client's time stamp contains a value that
is too far off the server’s time). Note that the time stamp MAY be used by a
client that has no real-time clock, but has a countdown timer, to obtain useful
“seconds from now” values from all of the Date attributes by performing a
subtraction.
|
Object
|
Encoding
|
|
Time Stamp
|
Date-Time
|
Table
265: Time Stamp in Message Header
This is used to authenticate the requester. It is an
OPTIONAL information item, depending on the type of request being issued and on
server policies. Servers MAY require authentication on no requests, a subset of
the requests, or all requests, depending on policy. Query operations
used to interrogate server features and functions SHOULD NOT require
authentication. The Authentication structure SHALL contain one or more
Credential structures.
The authentication mechanisms are described and discussed
in Section 8.
|
Object
|
Encoding
|
|
Authentication
|
Structure
|
|
Credential, MAY be
repeated
|
Structure, see 2.1.2
|
Table 266: Authentication Structure in Message Header
6.7
Asynchronous Indicator
This Boolean flag indicates whether
the client is able to accept an asynchronous response. It SHALL have the
Boolean value True if the client is able to handle asynchronous responses, and
the value False otherwise. If not present in a request, then False is assumed.
If a client indicates that it is not able to handle asynchronous responses, the
server SHALL process the request synchronously.
|
Object
|
Encoding
|
|
Asynchronous Indicator
|
Boolean
|
Table 267: Asynchronous
Indicator in Message Request Header
6.8
Asynchronous Correlation Value
This is returned in the immediate response to an operation
that is pending and that requires asynchronous polling. Note: the server
decides which operations are performed synchronously or asynchronously (see 6.7). A server-generated correlation value SHALL be specified in any subsequent Poll
or Cancel operations that pertain to the original operation.
|
Object
|
Encoding
|
|
Asynchronous Correlation Value
|
Byte String
|
Table
268: Asynchronous Correlation Value in Response Batch Item
This is sent in a response message and indicates the
success or failure of a request. The following values MAY be set in this field:
·
Success – The requested operation completed successfully.
·
Operation Pending – The requested operation is in
progress, and it is necessary to obtain the actual result via asynchronous
polling. The asynchronous correlation value SHALL be used for the subsequent
polling of the result status.
·
Operation Undone – The requested operation was performed,
but had to be undone (i.e., due to a failure in a batch for which the Error
Continuation Option (see 6.13 and 7.2) was set to Undo).
·
Operation Failed – The requested operation failed.
|
Object
|
Encoding
|
|
Result Status
|
Enumeration, see 9.1.3.2.28
|
Table
269: Result Status in Response Batch Item
This field indicates a reason for failure or a modifier
for a partially successful operation and SHALL be present in responses that
return a Result Status of Failure. In such a case, the Result Reason SHALL be
set as specified in Section 11. It is OPTIONAL in any response that returns a
Result Status of Success. The following defined values are defined for
this field:
·
Item not found – A requested object was not found or did
not exist.
·
Response too large – The response to a request would
exceed the Maximum Response Size in the request.
·
Authentication not successful – The authentication
information in the request could not be validated, or was not found.
·
Invalid message – The request message was not understood
by the server.
·
Operation not supported – The operation requested by the
request message is not supported by the server.
·
Missing data – The operation REQUIRED additional
information in the request, which was not present.
·
Invalid field – Some data item in the request has an
invalid value.
·
Feature not supported – An OPTIONAL feature specified in
the request is not supported.
·
Operation canceled by requester – The operation was
asynchronous, and the operation was canceled by the Cancel operation before it
completed successfully.
·
Cryptographic failure – The operation failed due to a
cryptographic error.
·
Illegal operation – The client requested an operation that
was not able to be performed with the specified parameters.
·
Permission denied – The client does not have permission to
perform the requested operation.
·
Object archived – The object SHALL be recovered from the
archive before performing the operation.
·
Index Out of Bounds – The client tried to set more
instances than the server supports of an attribute that MAY have multiple
instances.
·
Application Namespace Not Supported – The particular
Application Namespace is not supported, and the server was not able to generate
the Application Data field of an Application Specific Information attribute if
the field was omitted from the client request.
·
Key Format Type and/or Key Compression Type Not Supported
– The object exists, but the server is unable to provide it in the desired Key
Format Type and/or Key Compression Type.
·
General failure – The request failed for a reason other
than the defined reasons above.
|
Object
|
Encoding
|
|
Result Reason
|
Enumeration, see 9.1.3.2.29
|
Table
270: Result Reason in Response Batch Item
This field MAY be returned in a response. It contains a
more descriptive error message, which MAY be provided to an end user or used
for logging/auditing purposes.
|
Object
|
Encoding
|
|
Result Message
|
Text String
|
Table
271: Result Message in Response Batch Item
A Boolean value used in requests where the Batch Count is
greater than 1. If True, then batched operations SHALL be executed in the order
in which they appear within the request. If False, then the server MAY choose
to execute the batched operations in any order. If not specified, then False is
assumed (i.e., no implied ordering). Server support for this feature is
OPTIONAL, but if the server does not support the feature, and a request is
received with the batch order option set to True, then the entire request SHALL
be rejected.
|
Object
|
Encoding
|
|
Batch Order Option
|
Boolean
|
Table
272: Batch Order Option in Message Request Header
This option SHALL only be present if the Batch Count is
greater than 1. This option SHALL have one of three values:
·
Undo – If any operation in the request fails, then the
server SHALL undo all the previous operations.
·
Stop – If an operation fails, then the server SHALL NOT
continue processing subsequent operations in the request. Completed operations
SHALL NOT be undone.
·
Continue – Return an error for the failed operation, and
continue processing subsequent operations in the request.
If not specified, then Stop is assumed.
Server support for this feature is OPTIONAL, but if the
server does not support the feature, and a request is received containing the Batch
Error Continuation Option with a value other than the default Stop,
then the entire request SHALL be rejected.
|
Object
|
Encoding
|
|
Batch Error Continuation Option
|
Enumeration, see 9.1.3.2.30
|
Table
273: Batch Error Continuation Option in Message Request Header
This field contains the number of Batch Items in a message
and is REQUIRED. If only a single operation is being requested, then the batch
count SHALL be set to 1. The Message Payload, which follows the Message Header,
contains one or more batch items.
|
Object
|
Encoding
|
|
Batch Count
|
Integer
|
Table
274: Batch Count in Message Header
This field consists of a structure that holds the
individual requests or responses in a batch, and is REQUIRED. The contents of
the batch items are described in Section 7.2.
|
Object
|
Encoding
|
|
Batch Item
|
Structure
|
Table
275: Batch Item in Message
The Message Extension is an OPTIONAL structure that
MAY be appended to any Batch Item. It is used to extend protocol messages for
the purpose of adding vendor-specified extensions. The Message Extension is a
structure that SHALL contain the Vendor Identification, Criticality Indicator,
and Vendor Extension fields. The Vendor Identification SHALL be a text
string that uniquely identifies the vendor, allowing a client to determine if
it is able to parse and understand the extension. If a client or server
receives a protocol message containing a message extension that it does not
understand, then its actions depend on the Criticality Indicator. If the
indicator is True (i.e., Critical), and the receiver does not understand the
extension, then the receiver SHALL reject the entire message. If the indicator
is False (i.e., Non-Critical), and the receiver does not understand the
extension, then the receiver MAY process the rest of the message as if the
extension were not present. The Vendor Extension structure SHALL contain
vendor-specific extensions.
|
Object
|
Encoding
|
|
Message Extension
|
Structure
|
|
Vendor Identification
|
Text String
|
|
Criticality Indicator
|
Boolean
|
|
Vendor Extension
|
Structure
|
Table
276: Message Extension Structure in Batch Item
The Attestation Capable Indicator flag indicates
whether the client is able to create an Attestation Credential object. It SHALL
have Boolean value True if the client is able to create an Attestation
Credential object, and the value False otherwise. If not present, the value
False is assumed. If a client indicates that it is not able to create an
Attestation Credential Object, and the client has issued an operation that
requires attestation such as Get, then the server SHALL respond to the request
with a failure.
|
Object
|
Encoding
|
|
Attestation Capable Indicator
|
Boolean
|
Table 277: Attestation Capable Indicator in Message Request Header
The Client Correlation Value is a string that MAY be added
to messages by clients to provide additional information to the server. It need
not be unique. The server SHOULD log this information. The Client Correlation
Value is provided in the request for client to server operations. The Client
Correlation Value is provided in the response for server to client operations.
|
Object
|
Encoding
|
|
Server Correlation Value
|
Text String
|
Table 278: Client Correlation
Value in Message Request Header
The Server Correlation Value SHOULD be provided by the
server and SHOULD be globally unique, and SHOULD be logged by the server with
each request.
The Server Correlation Value is provided in the response for
client to server operations. The Server Correlation Value is provided in the request
for server to client operations.
|
Object
|
Encoding
|
|
Server Correlation Value
|
Text String
|
Table 279: Server Correlation
Value in Message Request Header
Messages contain the following objects and fields. All fields
SHALL appear in the order specified.
7.1 Message Structure
|
Object
|
Encoding
|
REQUIRED
|
|
Request Message
|
Structure
|
|
|
Request Header
|
Structure, see
Table 282
|
Yes
|
|
Batch Item
|
Structure, see
Table 283
|
Yes, MAY be repeated
|
Table
280: Request Message Structure
|
Object
|
Encoding
|
REQUIRED
|
|
Response Message
|
Structure
|
|
|
Response Header
|
Structure, see
Table 284
|
Yes
|
|
Batch Item
|
Structure, see
Table 285
|
Yes, MAY be repeated
|
Table
281: Response Message Structure
7.2 Operations
If the client is capable of accepting asynchronous
responses, then it MAY set the Asynchronous Indicator in the header of a
batched request. The batched responses MAY contain a mixture of synchronous and
asynchronous responses.
|
Request Header
|
|
Object
|
REQUIRED in Message
|
Comment
|
|
Request Header
|
Yes
|
Structure
|
|
Protocol Version
|
Yes
|
See 6.1
|
|
Maximum Response Size
|
No
|
See 6.3
|
|
Client Correlation
Value
|
No
|
See 6.18
|
|
Server Correlation
Value
|
No
|
See 6.19
|
|
Asynchronous Indicator
|
No
|
See 6.7
|
|
Attestation Capable
Indicator
|
No
|
See 6.17
|
|
Attestation Type
|
No, MAY be repeated
|
See 9.1.3.2.36
|
|
Authentication
|
No
|
See 6.6
|
|
Batch Error
Continuation Option
|
No
|
If omitted, then Stop is assumed, see 6.13
|
|
Batch Order Option
|
No
|
If omitted, then False is assumed, see 6.12
|
|
Time Stamp
|
No
|
See 6.5
|
|
Batch Count
|
Yes
|
See 6.14
|
Table
282: Request Header Structure
|
Request Batch
Item
|
|
Object
|
REQUIRED in Message
|
Comment
|
|
Batch Item
|
Yes
|
Structure, see 6.15
|
|
Operation
|
Yes
|
See 6.2
|
|
Unique Batch Item ID
|
No
|
REQUIRED if Batch Count > 1, see 6.4
|
|
Request Payload
|
Yes
|
Structure, contents depend on the Operation, see 4and 5
|
|
Message Extension
|
No
|
See 6.16
|
Table
283: Request Batch Item Structure
|
Response Header
|
|
Object
|
REQUIRED in
Message
|
Comment
|
|
Response Header
|
Yes
|
Structure
|
|
Protocol Version
|
Yes
|
See 6.1
|
|
Time Stamp
|
Yes
|
See 6.5
|
|
Nonce
|
No
|
See 2.1.14
|
|
Attestation Type
|
No, MAY be repeated
|
REQUIRED in Attestation Required error
message if client set Attestation Capable Indicator to True in the request,
see 9.1.3.2.36
|
|
Client Correlation
Value
|
No
|
See 6.18
|
|
Server Correlation
Value
|
No
|
See 6.19
|
|
Batch Count
|
Yes
|
See 6.14
|
Table
284: Response Header Structure
|
Response Batch
Item
|
|
Object
|
REQUIRED in
Message
|
Comment
|
|
Batch Item
|
Yes
|
Structure, see 6.15
|
|
Operation
|
Yes, if specified in
Request Batch Item
|
See 6.2
|
|
Unique Batch Item ID
|
No
|
REQUIRED if present in Request Batch Item, see 6.4
|
|
Result Status
|
Yes
|
See 6.9
|
|
Result Reason
|
Yes, if Result Status
is Failure
|
REQUIRED if Result Status is Failure,
otherwise OPTIONAL, see 6.10
|
|
Result Message
|
No
|
OPTIONAL if Result Status is not Pending or
Success, see 6.11
|
|
Asynchronous Correlation
Value
|
No
|
REQUIRED if Result Status is Pending, see 6.8
|
|
Response Payload
|
Yes, if not a failure
|
Structure, contents depend on the Operation, see 4and 5
|
|
Message Extension
|
No
|
See 6.16
|
Table 285: Response Batch Item
Structure
The mechanisms used to authenticate the client to the
server and the server to the client are not part of the message definitions,
and are external to the protocol. The KMIP Server SHALL support authentication
as defined in [KMIP-Prof].
To support different transport protocols and different
client capabilities, a number of message-encoding mechanisms are supported.
9.1
TTLV Encoding
In order to minimize the resource impact on potentially
low-function clients, one encoding mechanism to be used for protocol messages
is a simplified TTLV (Tag, Type, Length, Value) scheme.
The scheme is designed to minimize the CPU cycle and
memory requirements of clients that need to encode or decode protocol messages,
and to provide optimal alignment for both 32-bit and 64-bit processors. Minimizing
bandwidth over the transport mechanism is considered to be of lesser
importance.
9.1.1 TTLV Encoding Fields
Every Data object encoded by the TTLV scheme consists of
four items, in order:
9.1.1.1
Item Tag
An Item Tag is a three-byte binary unsigned integer,
transmitted big endian, which contains a number that designates the specific
Protocol Field or Object that the TTLV object represents. To ease debugging,
and to ensure that malformed messages are detected more easily, all tags SHALL
contain either the value 42 in hex or the value 54 in hex as the high order
(first) byte. Tags defined by this specification contain hex 42 in the first
byte. Extensions, which are permitted, but are not defined in this specification,
contain the value 54 hex in the first byte. A list of defined Item Tags is in
Section 9.1.3.1
9.1.1.2 Item Type
An Item Type is a byte containing a coded value that
indicates the data type of the data object. The allowed values are:
|
Data
Type
|
Coded Value in Hex
|
|
Structure
|
01
|
|
Integer
|
02
|
|
Long
Integer
|
03
|
|
Big
Integer
|
04
|
|
Enumeration
|
05
|
|
Boolean
|
06
|
|
Text
String
|
07
|
|
Byte
String
|
08
|
|
Date-Time
|
09
|
|
Interval
|
0A
|
Table 286: Allowed Item Type Values
An Item Length is a 32-bit binary integer, transmitted
big-endian, containing the number of bytes in the Item Value. The allowed
values are:
|
Data
Type
|
Length
|
|
Structure
|
Varies, multiple of 8
|
|
Integer
|
4
|
|
Long
Integer
|
8
|
|
Big
Integer
|
Varies, multiple of 8
|
|
Enumeration
|
4
|
|
Boolean
|
8
|
|
Text
String
|
Varies
|
|
Byte
String
|
Varies
|
|
Date-Time
|
8
|
|
Interval
|
4
|
Table 287: Allowed Item Length Values
If the Item Type is Structure,
then the Item Length is the total length of all of the sub-items contained in
the structure, including any padding. If the Item Type is Integer, Enumeration,
Text String, Byte String, or Interval, then the Item Length is the number of
bytes excluding the padding bytes. Text Strings and Byte Strings SHALL be
padded with the minimal number of bytes following the Item Value to obtain a
multiple of eight bytes. Integers, Enumerations, and Intervals SHALL be padded
with four bytes following the Item Value.
9.1.1.4 Item Value
The item value is a sequence of bytes containing the value
of the data item, depending on the type:
·
Integers are encoded as four-byte long (32 bit) binary signed
numbers in 2's complement notation, transmitted big-endian.
·
Long Integers are encoded as eight-byte long (64 bit) binary
signed numbers in 2's complement notation, transmitted big-endian.
·
Big Integers are encoded as a sequence of eight-bit bytes, in
two's complement notation, transmitted big-endian. If the length of the
sequence is not a multiple of eight bytes, then Big Integers SHALL be padded
with the minimal number of leading sign-extended bytes to make the length a
multiple of eight bytes. These padding bytes are part of the Item Value and
SHALL be counted in the Item Length.
·
Enumerations are encoded as four-byte long (32 bit) binary
unsigned numbers transmitted big-endian. Extensions, which are permitted, but are not defined in this
specification, contain the value 8 hex in the first nibble of the first byte.
·
Booleans are encoded as an eight-byte value that SHALL either
contain the hex value 0000000000000000, indicating the Boolean value False, or
the hex value 0000000000000001, transmitted big-endian, indicating the Boolean
value True.
·
Text Strings are sequences of bytes that encode character values
according to the UTF-8 encoding standard. There SHALL NOT be null-termination
at the end of such strings.
·
Byte Strings are sequences of bytes containing individual
unspecified eight-bit binary values, and are interpreted in the same sequence
order.
Date-Time values are POSIX Time values encoded as Long Integers.
POSIX Time, as described in IEEE Standard 1003.1 [FIPS202] SHA-3 Standard:
Permutation-Based Hash and Extendable-Output Functions, August 2015. http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.202.pdf
·
[IEEE1003-1], is the number of seconds
since the Epoch (1970 Jan 1, 00:00:00 UTC), not counting leap seconds.
·
Intervals are encoded as four-byte long (32 bit) binary unsigned
numbers, transmitted big-endian. They have a resolution of one second.
·
Structure Values are encoded as the concatenated encodings of the
elements of the structure. All structures defined in this specification SHALL
have all of their fields encoded in the order in which they appear in their
respective structure descriptions.
9.1.2 Examples
These examples are assumed to be encoding a Protocol
Object whose tag is 420020. The examples are shown as a sequence of bytes in
hexadecimal notation:
·
An Integer containing the decimal value 8:
42
00 20 | 02 | 00 00 00 04 | 00 00 00 08 00 00 00 00
·
A Long Integer containing the decimal value 123456789000000000:
42
00 20 | 03 | 00 00 00 08 | 01 B6 9B 4B A5 74 92 00
·
A Big Integer containing the decimal value
1234567890000000000000000000:
42
00 20 | 04 | 00 00 00 10 | 00 00 00 00 03 FD 35 EB 6B C2 DF 46 18 08 00 00
·
An Enumeration with value 255:
42
00 20 | 05 | 00 00 00 04 | 00 00 00 FF 00 00 00 00
·
A Boolean with the value True:
42
00 20 | 06 | 00 00 00 08 | 00 00 00 00 00 00 00 01
·
A Text String with the value "Hello World":
42
00 20 | 07 | 00 00 00 0B | 48 65 6C 6C 6F 20 57 6F 72 6C 64 00 00 00 00 00
·
A Byte String with the value { 0x01, 0x02, 0x03 }:
42
00 20 | 08 | 00 00 00 03 | 01 02 03 00 00 00 00 00
·
A Date-Time, containing the value for Friday, March 14, 2008,
11:56:40 GMT:
42
00 20 | 09 | 00 00 00 08 | 00 00 00 00 47 DA 67 F8
·
An Interval, containing the value for 10 days:
42
00 20 | 0A | 00 00 00 04 | 00 0D 2F 00 00 00 00 00
·
A Structure containing an Enumeration, value 254, followed by an
Integer, value 255, having tags 420004 and 420005 respectively:
42
00 20 | 01 | 00 00 00 20 | 42 00 04 | 05 | 00 00 00 04 | 00 00 00 FE 00 00 00
00 | 42 00 05 | 02 | 00 00 00 04 | 00 00 00 FF 00 00 00 00
9.1.3
Defined Values
This section specifies the values that are defined by this
specification. In all cases where an extension mechanism is allowed, this
extension mechanism is only able to be used for communication between parties
that have pre-agreed understanding of the specific extensions.
9.1.3.1 Tags
The following table defines the tag values for the objects
and primitive data values for the protocol messages.
|
Tag
|
|
Object
|
Tag Value
|
|
(Unused)
|
000000 - 420000
|
|
Activation Date
|
420001
|
|
Application Data
|
420002
|
|
Application Namespace
|
420003
|
|
Application Specific Information
|
420004
|
|
Archive Date
|
420005
|
|
Asynchronous Correlation Value
|
420006
|
|
Asynchronous Indicator
|
420007
|
|
Attribute
|
420008
|
|
Attribute Index
|
420009
|
|
Attribute Name
|
42000A
|
|
Attribute Value
|
42000B
|
|
Authentication
|
42000C
|
|
Batch Count
|
42000D
|
|
Batch Error Continuation Option
|
42000E
|
|
Batch Item
|
42000F
|
|
Batch Order Option
|
420010
|
|
Block Cipher Mode
|
420011
|
|
Cancellation Result
|
420012
|
|
Certificate
|
420013
|
|
Certificate Identifier
|
420014 (deprecated as of version 1.1)
|
|
Certificate Issuer
|
420015 (deprecated as of version 1.1)
|
|
Certificate Issuer Alternative Name
|
420016 (deprecated as of version 1.1)
|
|
Certificate Issuer Distinguished Name
|
420017 (deprecated as of version 1.1)
|
|
Certificate Request
|
420018
|
|
Certificate Request Type
|
420019
|
|
Certificate Subject
|
42001A (deprecated as of version 1.1)
|
|
Certificate Subject Alternative Name
|
42001B (deprecated as of version 1.1)
|
|
Certificate Subject Distinguished Name
|
42001C (deprecated as of version 1.1)
|
|
Certificate Type
|
42001D
|
|
Certificate Value
|
42001E
|
|
Common Template-Attribute
|
42001F
|
|
Compromise Date
|
420020
|
|
Compromise Occurrence Date
|
420021
|
|
Contact Information
|
420022
|
|
Credential
|
420023
|
|
Credential Type
|
420024
|
|
Credential Value
|
420025
|
|
Criticality Indicator
|
420026
|
|
CRT Coefficient
|
420027
|
|
Cryptographic Algorithm
|
420028
|
|
Cryptographic Domain Parameters
|
420029
|
|
Cryptographic Length
|
42002A
|
|
Cryptographic Parameters
|
42002B
|
|
Cryptographic Usage Mask
|
42002C
|
|
Custom Attribute
|
42002D
|
|
D
|
42002E
|
|
Deactivation Date
|
42002F
|
|
Derivation Data
|
420030
|
|
Derivation Method
|
420031
|
|
Derivation Parameters
|
420032
|
|
Destroy Date
|
420033
|
|
Digest
|
420034
|
|
Digest Value
|
420035
|
|
Encryption Key Information
|
420036
|
|
G
|
420037
|
|
Hashing Algorithm
|
420038
|
|
Initial Date
|
420039
|
|
Initialization Vector
|
42003A
|
|
Issuer
|
42003B (deprecated as of version 1.1)
|
|
Iteration Count
|
42003C
|
|
IV/Counter/Nonce
|
42003D
|
|
J
|
42003E
|
|
Key
|
42003F
|
|
Key Block
|
420040
|
|
Key Compression Type
|
420041
|
|
Key Format Type
|
420042
|
|
Key Material
|
420043
|
|
Key Part Identifier
|
420044
|
|
Key Value
|
420045
|
|
Key Wrapping Data
|
420046
|
|
Key Wrapping Specification
|
420047
|
|
Last Change Date
|
420048
|
|
Lease Time
|
420049
|
|
Link
|
42004A
|
|
Link Type
|
42004B
|
|
Linked Object Identifier
|
42004C
|
|
MAC/Signature
|
42004D
|
|
MAC/Signature Key Information
|
42004E
|
|
Maximum Items
|
42004F
|
|
Maximum Response Size
|
420050
|
|
Message Extension
|
420051
|
|
Modulus
|
420052
|
|
Name
|
420053
|
|
Name Type
|
420054
|
|
Name Value
|
420055
|
|
Object Group
|
420056
|
|
Object Type
|
420057
|
|
Offset
|
420058
|
|
Opaque Data Type
|
420059
|
|
Opaque Data Value
|
42005A
|
|
Opaque Object
|
42005B
|
|
Operation
|
42005C
|
|
Operation Policy Name
|
42005D (deprecated)
|
|
P
|
42005E
|
|
Padding Method
|
42005F
|
|
Prime Exponent P
|
420060
|
|
Prime Exponent Q
|
420061
|
|
Prime Field Size
|
420062
|
|
Private Exponent
|
420063
|
|
Private Key
|
420064
|
|
Private Key Template-Attribute
|
420065
|
|
Private Key Unique Identifier
|
420066
|
|
Process Start Date
|
420067
|
|
Protect Stop Date
|
420068
|
|
Protocol Version
|
420069
|
|
Protocol Version Major
|
42006A
|
|
Protocol Version Minor
|
42006B
|
|
Public Exponent
|
42006C
|
|
Public Key
|
42006D
|
|
Public Key Template-Attribute
|
42006E
|
|
Public Key Unique Identifier
|
42006F
|
|
Put Function
|
420070
|
|
Q
|
420071
|
|
Q String
|
420072
|
|
Qlength
|
420073
|
|
Query Function
|
420074
|
|
Recommended Curve
|
420075
|
|
Replaced Unique Identifier
|
420076
|
|
Request Header
|
420077
|
|
Request Message
|
420078
|
|
Request Payload
|
420079
|
|
Response Header
|
42007A
|
|
Response Message
|
42007B
|
|
Response Payload
|
42007C
|
|
Result Message
|
42007D
|
|
Result Reason
|
42007E
|
|
Result Status
|
42007F
|
|
Revocation Message
|
420080
|
|
Revocation Reason
|
420081
|
|
Revocation Reason Code
|
420082
|
|
Key Role Type
|
420083
|
|
Salt
|
420084
|
|
Secret Data
|
420085
|
|
Secret Data Type
|
420086
|
|
Serial Number
|
420087 (deprecated as of version 1.1)
|
|
Server Information
|
420088
|
|
Split Key
|
420089
|
|
Split Key Method
|
42008A
|
|
Split Key Parts
|
42008B
|
|
Split Key Threshold
|
42008C
|
|
State
|
42008D
|
|
Storage Status Mask
|
42008E
|
|
Symmetric Key
|
42008F
|
|
Template
|
420090
|
|
Template-Attribute
|
420091
|
|
Time Stamp
|
420092
|
|
Unique Batch Item ID
|
420093
|
|
Unique Identifier
|
420094
|
|
Usage Limits
|
420095
|
|
Usage Limits Count
|
420096
|
|
Usage Limits Total
|
420097
|
|
Usage Limits Unit
|
420098
|
|
Username
|
420099
|
|
Validity Date
|
42009A
|
|
Validity Indicator
|
42009B
|
|
Vendor Extension
|
42009C
|
|
Vendor Identification
|
42009D
|
|
Wrapping Method
|
42009E
|
|
X
|
42009F
|
|
Y
|
4200A0
|
|
Password
|
4200A1
|
|
Device Identifier
|
4200A2
|
|
Encoding Option
|
4200A3
|
|
Extension Information
|
4200A4
|
|
Extension Name
|
4200A5
|
|
Extension Tag
|
4200A6
|
|
Extension Type
|
4200A7
|
|
Fresh
|
4200A8
|
|
Machine Identifier
|
4200A9
|
|
Media Identifier
|
4200AA
|
|
Network Identifier
|
4200AB
|
|
Object Group Member
|
4200AC
|
|
Certificate Length
|
4200AD
|
|
Digital Signature Algorithm
|
4200AE
|
|
Certificate Serial Number
|
4200AF
|
|
Device Serial Number
|
4200B0
|
|
Issuer Alternative Name
|
4200B1
|
|
Issuer Distinguished Name
|
4200B2
|
|
Subject Alternative Name
|
4200B3
|
|
Subject Distinguished Name
|
4200B4
|
|
X.509 Certificate Identifier
|
4200B5
|
|
X.509 Certificate Issuer
|
4200B6
|
|
X.509 Certificate Subject
|
4200B7
|
|
Key Value Location
|
4200B8
|
|
Key Value Location Value
|
4200B9
|
|
Key Value Location Type
|
4200BA
|
|
Key Value Present
|
4200BB
|
|
Original Creation Date
|
4200BC
|
|
PGP Key
|
4200BD
|
|
PGP Key Version
|
4200BE
|
|
Alternative Name
|
4200BF
|
|
Alternative Name Value
|
4200C0
|
|
Alternative Name Type
|
4200C1
|
|
Data
|
4200C2
|
|
Signature Data
|
4200C3
|
|
Data Length
|
4200C4
|
|
Random IV
|
4200C5
|
|
MAC Data
|
4200C6
|
|
Attestation Type
|
4200C7
|
|
Nonce
|
4200C8
|
|
Nonce ID
|
4200C9
|
|
Nonce Value
|
4200CA
|
|
Attestation Measurement
|
4200CB
|
|
Attestation Assertion
|
4200CC
|
|
IV Length
|
4200CD
|
|
Tag Length
|
4200CE
|
|
Fixed Field Length
|
4200CF
|
|
Counter Length
|
4200D0
|
|
Initial Counter Value
|
4200D1
|
|
Invocation Field Length
|
4200D2
|
|
Attestation Capable Indicator
|
4200D3
|
|
Offset Items
|
4200D4
|
|
Located Items
|
4200D5
|
|
Correlation Value
|
4200D6
|
|
Init Indicator
|
4200D7
|
|
Final Indicator
|
4200D8
|
|
RNG Parameters
|
4200D9
|
|
RNG Algorithm
|
4200DA
|
|
DRBG Algorithm
|
4200DB
|
|
FIPS186 Variation
|
4200DC
|
|
Prediction Resistance
|
4200DD
|
|
Random Number Generator
|
4200DE
|
|
Validation Information
|
4200DF
|
|
Validation Authority Type
|
4200E0
|
|
Validation Authority Country
|
4200E1
|
|
Validation Authority URI
|
4200E2
|
|
Validation Version Major
|
4200E3
|
|
Validation Version Minor
|
4200E4
|
|
Validation Type
|
4200E5
|
|
Validation Level
|
4200E6
|
|
Validation Certificate Identifier
|
4200E7
|
|
Validation Certificate URI
|
4200E8
|
|
Validation Vendor URI
|
4200E9
|
|
Validation Profile
|
4200EA
|
|
Profile Information
|
4200EB
|
|
Profile Name
|
4200EC
|
|
Server URI
|
4200ED
|
|
Server Port
|
4200EE
|
|
Streaming Capability
|
4200EF
|
|
Asynchronous Capability
|
4200F0
|
|
Attestation Capability
|
4200F1
|
|
Unwrap Mode
|
4200F2
|
|
Destroy Action
|
4200F3
|
|
Shredding Algorithm
|
4200F4
|
|
RNG Mode
|
4200F5
|
|
Client Registration Method
|
4200F6
|
|
Capability Information
|
4200F7
|
|
Key Wrap Type
|
4200F8
|
|
Batch Undo Capability
|
4200F9
|
|
Batch Continue Capability
|
4200FA
|
|
PKCS#12 Friendly Name
|
4200FB
|
|
Description
|
4200FC
|
|
Comment
|
4200FD
|
|
Authenticated
Encryption Additional Data
|
4200FE
|
|
Authenticated Encryption Tag
|
4200FF
|
|
Salt Length
|
420100
|
|
Mask Generator
|
420101
|
|
Mask Generator Hashing Algorithm
|
420102
|
|
P Source
|
420103
|
|
Trailer Field
|
420104
|
|
Client Correlation Value
|
420105
|
|
Server Correlation Value
|
420106
|
|
Digested Data
|
420107
|
|
Certificate Subject CN
|
420108
|
|
Certificate Subject O
|
420109
|
|
Certificate Subject OU
|
42010A
|
|
Certificate Subject Email
|
42010B
|
|
Certificate Subject C
|
42010C
|
|
Certificate Subject ST
|
42010D
|
|
Certificate Subject L
|
42010E
|
|
Certificate Subject UID
|
42010F
|
|
Certificate Subject Serial Number
|
420110
|
|
Certificate Subject Title
|
420111
|
|
Certificate Subject DC
|
420112
|
|
Certificate Subject DN Qualifier
|
420113
|
|
Certificate Issuer CN
|
420114
|
|
Certificate Issuer O
|
420115
|
|
Certificate Issuer OU
|
420116
|
|
Certificate Issuer Email
|
420117
|
|
Certificate Issuer C
|
420118
|
|
Certificate Issuer ST
|
420119
|
|
Certificate Issuer L
|
42011A
|
|
Certificate Issuer UID
|
42011B
|
|
Certificate Issuer Serial Number
|
42011C
|
|
Certificate Issuer Title
|
42011D
|
|
Certificate Issuer DC
|
42011E
|
|
Certificate Issuer DN Qualifier
|
42011F
|
|
Sensitive
|
420120
|
|
Always Sensitive
|
420121
|
|
Extractable
|
420122
|
|
Never Extractable
|
420123
|
|
Replace Existing
|
420124
|
|
(Reserved)
|
420120 – 42FFFF
|
|
(Unused)
|
430000 – 53FFFF
|
|
Extensions
|
540000 – 54FFFF
|
|
(Unused)
|
550000 - FFFFFF
|
Table 288: Tag Values
The following tables define the values for enumerated
lists. Values not listed (outside the range 80000000 to 8FFFFFFF) are reserved
for future KMIP versions.
9.1.3.2.1 Credential Type
Enumeration
|
Credential
Type
|
|
Name
|
Value
|
|
Username and Password
|
00000001
|
|
Device
|
00000002
|
|
Attestation
|
00000003
|
|
Extensions
|
8XXXXXXX
|
Table
289: Credential Type Enumeration
|
Key
Compression Type
|
|
Name
|
Value
|
|
EC Public Key Type Uncompressed
|
00000001
|
|
EC Public Key Type X9.62 Compressed Prime
|
00000002
|
|
EC Public Key Type X9.62 Compressed Char2
|
00000003
|
|
EC Public Key Type X9.62 Hybrid
|
00000004
|
|
Extensions
|
8XXXXXXX
|
Table 290: Key Compression Type Enumeration
|
Key Format
Type
|
|
Name
|
Value
|
|
Raw
|
00000001
|
|
Opaque
|
00000002
|
|
PKCS#1
|
00000003
|
|
PKCS#8
|
00000004
|
|
X.509
|
00000005
|
|
ECPrivateKey
|
00000006
|
|
Transparent Symmetric Key
|
00000007
|
|
Transparent DSA Private Key
|
00000008
|
|
Transparent DSA Public Key
|
00000009
|
|
Transparent RSA Private Key
|
0000000A
|
|
Transparent RSA Public Key
|
0000000B
|
|
Transparent DH Private Key
|
0000000C
|
|
Transparent DH Public Key
|
0000000D
|
|
Transparent ECDSA Private Key
|
0000000E (deprecated)
|
|
Transparent ECDSA Public Key
|
0000000F (deprecated)
|
|
Transparent ECDH Private Key
|
00000010 (deprecated)
|
|
Transparent ECDH Public Key
|
00000011 (deprecated)
|
|
Transparent ECMQV Private Key
|
00000012 (deprecated)
|
|
Transparent ECMQV Public Key
|
00000013 (deprecated)
|
|
Transparent EC Private Key
|
00000014
|
|
Transparent EC Public Key
|
00000015
|
|
PKCS#12
|
00000016
|
|
Extensions
|
8XXXXXXX
|
Table
291: Key Format Type Enumeration
|
Wrapping
Method
|
|
Name
|
Value
|
|
Encrypt
|
00000001
|
|
MAC/sign
|
00000002
|
|
Encrypt then MAC/sign
|
00000003
|
|
MAC/sign then encrypt
|
00000004
|
|
TR-31
|
00000005
|
|
Extensions
|
8XXXXXXX
|
Table
292: Wrapping Method Enumeration
Recommended curves are defined in [FIPS186-4]
[SEC2] [X9.62] [CHACHA] D. J. Bernstein. ChaCha, a variant of Salsa20. https://cr.yp.to/chacha/chacha-20080128.pdf
[ECC-Brainpool][RFC5639],
|
Recommended
Curve Enumeration
|
|
Name
|
Value
|
|
P-192
|
00000001
|
|
K-163
|
00000002
|
|
B-163
|
00000003
|
|
P-224
|
00000004
|
|
K-233
|
00000005
|
|
B-233
|
00000006
|
|
P-256
|
00000007
|
|
K-283
|
00000008
|
|
B-283
|
00000009
|
|
P-384
|
0000000A
|
|
K-409
|
0000000B
|
|
B-409
|
0000000C
|
|
P-521
|
0000000D
|
|
K-571
|
0000000E
|
|
B-571
|
0000000F
|
|
SECP112R1
|
00000010
|
|
SECP112R2
|
00000011
|
|
SECP128R1
|
00000012
|
|
SECP128R2
|
00000013
|
|
SECP160K1
|
00000014
|
|
SECP160R1
|
00000015
|
|
SECP160R2
|
00000016
|
|
SECP192K1
|
00000017
|
|
SECP224K1
|
00000018
|
|
SECP256K1
|
00000019
|
|
SECT113R1
|
0000001A
|
|
SECT113R2
|
0000001B
|
|
SECT131R1
|
0000001C
|
|
SECT131R2
|
0000001D
|
|
SECT163R1
|
0000001E
|
|
SECT193R1
|
0000001F
|
|
SECT193R2
|
00000020
|
|
SECT239K1
|
00000021
|
|
ANSIX9P192V2
|
00000022
|
|
ANSIX9P192V3
|
00000023
|
|
ANSIX9P239V1
|
00000024
|
|
ANSIX9P239V2
|
00000025
|
|
ANSIX9P239V3
|
00000026
|
|
ANSIX9C2PNB163V1
|
00000027
|
|
ANSIX9C2PNB163V2
|
00000028
|
|
ANSIX9C2PNB163V3
|
00000029
|
|
ANSIX9C2PNB176V1
|
0000002A
|
|
ANSIX9C2TNB191V1
|
0000002B
|
|
ANSIX9C2TNB191V2
|
0000002C
|
|
ANSIX9C2TNB191V3
|
0000002D
|
|
ANSIX9C2PNB208W1
|
0000002E
|
|
ANSIX9C2TNB239V1
|
0000002F
|
|
ANSIX9C2TNB239V2
|
00000030
|
|
ANSIX9C2TNB239V3
|
00000031
|
|
ANSIX9C2PNB272W1
|
00000032
|
|
ANSIX9C2PNB304W1
|
00000033
|
|
ANSIX9C2TNB359V1
|
00000034
|
|
ANSIX9C2PNB368W1
|
00000035
|
|
ANSIX9C2TNB431R1
|
00000036
|
|
BRAINPOOLP160R1
|
00000037
|
|
BRAINPOOLP160T1
|
00000038
|
|
BRAINPOOLP192R1
|
00000039
|
|
BRAINPOOLP192T1
|
0000003A
|
|
BRAINPOOLP224R1
|
0000003B
|
|
BRAINPOOLP224T1
|
0000003C
|
|
BRAINPOOLP256R1
|
0000003D
|
|
BRAINPOOLP256T1
|
0000003E
|
|
BRAINPOOLP320R1
|
0000003F
|
|
BRAINPOOLP320T1
|
00000040
|
|
BRAINPOOLP384R1
|
00000041
|
|
BRAINPOOLP384T1
|
00000042
|
|
BRAINPOOLP512R1
|
00000043
|
|
BRAINPOOLP512T1
|
00000044
|
|
Extensions
|
8XXXXXXX
|
Table
293: Recommended Curve Enumeration for ECDSA, ECDH, and ECMQV
The PGP certificate type is deprecated as of version 1.2 of this
specification and MAY be removed from subsequent versions of the specification.
|
Certificate
Type
|
|
Name
|
Value
|
|
X.509
|
00000001
|
|
PGP
|
00000002 (deprecated)
|
|
Extensions
|
8XXXXXXX
|
Table
294: Certificate Type Enumeration
|
Digital
Signature Algorithm
|
|
Name
|
Value
|
|
MD2 with RSA Encryption
(PKCS#1 v1.5)
|
00000001
|
|
MD5 with RSA Encryption (PKCS#1 v1.5)
|
00000002
|
|
SHA-1 with RSA Encryption (PKCS#1 v1.5)
|
00000003
|
|
SHA-224 with RSA Encryption (PKCS#1 v1.5)
|
00000004
|
|
SHA-256 with RSA Encryption (PKCS#1 v1.5)
|
00000005
|
|
SHA-384 with RSA Encryption (PKCS#1 v1.5)
|
00000006
|
|
SHA-512 with RSA Encryption (PKCS#1 v1.5)
|
00000007
|
|
RSASSA-PSS
(PKCS#1 v2.1)
|
00000008
|
|
DSA with SHA-1
|
00000009
|
|
DSA with SHA224
|
0000000A
|
|
DSA with SHA256
|
0000000B
|
|
ECDSA with SHA-1
|
0000000C
|
|
ECDSA with SHA224
|
0000000D
|
|
ECDSA with SHA256
|
0000000E
|
|
ECDSA with SHA384
|
0000000F
|
|
ECDSA with SHA512
|
00000010
|
|
SHA3-256 with RSA Encryption
|
00000011
|
|
SHA3-384 with RSA Encryption
|
00000012
|
|
SHA3-512 with RSA Encryption
|
00000013
|
|
Extensions
|
8XXXXXXX
|
Table 295: Digital Signature Algorithm Enumeration
|
Split Key
Method
|
|
Name
|
Value
|
|
XOR
|
00000001
|
|
Polynomial Sharing GF (216)
|
00000002
|
|
Polynomial Sharing Prime Field
|
00000003
|
|
Polynomial Sharing GF (28)
|
00000004
|
|
Extensions
|
8XXXXXXX
|
Table
296: Split Key Method Enumeration
|
Secret Data
Type
|
|
Name
|
Value
|
|
Password
|
00000001
|
|
Seed
|
00000002
|
|
Extensions
|
8XXXXXXX
|
Table
297: Secret Data Type Enumeration
|
Opaque Data
Type
|
|
Name
|
Value
|
|
Extensions
|
8XXXXXXX
|
Table
298: Opaque Data Type Enumeration
|
Name Type
|
|
Name
|
Value
|
|
Uninterpreted Text String
|
00000001
|
|
URI
|
00000002
|
|
Extensions
|
8XXXXXXX
|
Table
299: Name Type Enumeration
|
Object Type
|
|
Name
|
Value
|
|
Certificate
|
00000001
|
|
Symmetric Key
|
00000002
|
|
Public Key
|
00000003
|
|
Private Key
|
00000004
|
|
Split Key
|
00000005
|
|
Template
|
00000006 (deprecated)
|
|
Secret Data
|
00000007
|
|
Opaque Object
|
00000008
|
|
PGP Key
|
00000009
|
|
Extensions
|
8XXXXXXX
|
Table
300: Object Type Enumeration
|
Cryptographic
Algorithm
|
|
Name
|
Value
|
|
DES
|
00000001
|
|
3DES
|
00000002
|
|
AES
|
00000003
|
|
RSA
|
00000004
|
|
DSA
|
00000005
|
|
ECDSA
|
00000006
|
|
HMAC-SHA1
|
00000007
|
|
HMAC-SHA224
|
00000008
|
|
HMAC-SHA256
|
00000009
|
|
HMAC-SHA384
|
0000000A
|
|
HMAC-SHA512
|
0000000B
|
|
HMAC-MD5
|
0000000C
|
|
DH
|
0000000D
|
|
ECDH
|
0000000E
|
|
ECMQV
|
0000000F
|
|
Blowfish
|
00000010
|
|
Camellia
|
00000011
|
|
CAST5
|
00000012
|
|
IDEA
|
00000013
|
|
MARS
|
00000014
|
|
RC2
|
00000015
|
|
RC4
|
00000016
|
|
RC5
|
00000017
|
|
SKIPJACK
|
00000018
|
|
Twofish
|
00000019
|
|
EC
|
0000001A
|
|
One Time Pad
|
0000001B
|
|
ChaCha20
|
0000001C
|
|
Poly1305
|
0000001D
|
|
ChaCha20Poly1305
|
0000001E
|
|
SHA3-224
|
0000001F
|
|
SHA3-256
|
00000020
|
|
SHA3-384
|
00000021
|
|
SHA3-512
|
00000022
|
|
HMAC-SHA3-224
|
00000023
|
|
HMAC-SHA3-256
|
00000024
|
|
HMAC-SHA3-384
|
00000025
|
|
HMAC-SHA3-512
|
00000026
|
|
SHAKE-128
|
00000027
|
|
SHAKE-256
|
00000028
|
|
Extensions
|
8XXXXXXX
|
Table
301: Cryptographic Algorithm Enumeration
|
Block Cipher
Mode
|
|
Name
|
Value
|
|
CBC
|
00000001
|
|
ECB
|
00000002
|
|
PCBC
|
00000003
|
|
CFB
|
00000004
|
|
OFB
|
00000005
|
|
CTR
|
00000006
|
|
CMAC
|
00000007
|
|
CCM
|
00000008
|
|
GCM
|
00000009
|
|
CBC-MAC
|
0000000A
|
|
XTS
|
0000000B
|
|
AESKeyWrapPadding
|
0000000C
|
|
NISTKeyWrap
|
0000000D
|
|
X9.102 AESKW
|
0000000E
|
|
X9.102 TDKW
|
0000000F
|
|
X9.102 AKW1
|
00000010
|
|
X9.102 AKW2
|
00000011
|
|
AEAD
|
00000012
|
|
Extensions
|
8XXXXXXX
|
Table
302: Block Cipher Mode Enumeration
|
Padding Method
|
|
Name
|
Value
|
|
None
|
00000001
|
|
OAEP
|
00000002
|
|
PKCS5
|
00000003
|
|
SSL3
|
00000004
|
|
Zeros
|
00000005
|
|
ANSI X9.23
|
00000006
|
|
ISO 10126
|
00000007
|
|
PKCS1 v1.5
|
00000008
|
|
X9.31
|
00000009
|
|
PSS
|
0000000A
|
|
Extensions
|
8XXXXXXX
|
Table
303: Padding Method Enumeration
|
Hashing
Algorithm
|
|
Name
|
Value
|
|
MD2
|
00000001
|
|
MD4
|
00000002
|
|
MD5
|
00000003
|
|
SHA-1
|
00000004
|
|
SHA-224
|
00000005
|
|
SHA-256
|
00000006
|
|
SHA-384
|
00000007
|
|
SHA-512
|
00000008
|
|
RIPEMD-160
|
00000009
|
|
Tiger
|
0000000A
|
|
Whirlpool
|
0000000B
|
|
SHA-512/224
|
0000000C
|
|
SHA-512/256
|
0000000D
|
|
SHA-3-224
|
0000000E
|
|
SHA-3-256
|
0000000F
|
|
SHA-3-384
|
00000010
|
|
SHA-3-512
|
00000011
|
|
Extensions
|
8XXXXXXX
|
Table
304: Hashing Algorithm Enumeration
|
Key Role Type
|
|
Name
|
Value
|
|
BDK
|
00000001
|
|
CVK
|
00000002
|
|
DEK
|
00000003
|
|
MKAC
|
00000004
|
|
MKSMC
|
00000005
|
|
MKSMI
|
00000006
|
|
MKDAC
|
00000007
|
|
MKDN
|
00000008
|
|
MKCP
|
00000009
|
|
MKOTH
|
0000000A
|
|
KEK
|
0000000B
|
|
MAC16609
|
0000000C
|
|
MAC97971
|
0000000D
|
|
MAC97972
|
0000000E
|
|
MAC97973
|
0000000F
|
|
MAC97974
|
00000010
|
|
MAC97975
|
00000011
|
|
ZPK
|
00000012
|
|
PVKIBM
|
00000013
|
|
PVKPVV
|
00000014
|
|
PVKOTH
|
00000015
|
|
DUKPT
|
00000016
|
|
IV
|
00000017
|
|
TRKBK
|
00000018
|
|
Extensions
|
8XXXXXXX
|
Table
305: Key Role Type Enumeration
Note that while the set and definitions of key role types
are chosen to match [X9 TR-31] there is no necessity
to match binary representations.
|
State
|
|
Name
|
Value
|
|
Pre-Active
|
00000001
|
|
Active
|
00000002
|
|
Deactivated
|
00000003
|
|
Compromised
|
00000004
|
|
Destroyed
|
00000005
|
|
Destroyed Compromised
|
00000006
|
|
Extensions
|
8XXXXXXX
|
Table
306: State Enumeration
|
Revocation Reason Code
|
|
Name
|
Value
|
|
Unspecified
|
00000001
|
|
Key Compromise
|
00000002
|
|
CA Compromise
|
00000003
|
|
Affiliation Changed
|
00000004
|
|
Superseded
|
00000005
|
|
Cessation of Operation
|
00000006
|
|
Privilege Withdrawn
|
00000007
|
|
Extensions
|
8XXXXXXX
|
Table
307: Revocation Reason Code Enumeration
|
Link Type
|
|
Name
|
Value
|
|
Certificate Link
|
00000101
|
|
Public Key Link
|
00000102
|
|
Private Key Link
|
00000103
|
|
Derivation Base Object Link
|
00000104
|
|
Derived Key Link
|
00000105
|
|
Replacement Object Link
|
00000106
|
|
Replaced Object Link
|
00000107
|
|
Parent Link
|
00000108
|
|
Child Link
|
00000109
|
|
Previous Link
|
0000010A
|
|
Next Link
|
0000010B
|
|
PKCS#12 Certificate Link
|
0000010C
|
|
PKCS#12 Password Link
|
0000010D
|
|
Extensions
|
8XXXXXXX
|
Table 308: Link Type Enumeration
9.1.3.2.21 Derivation Method
Enumeration
|
Derivation
Method
|
|
Name
|
Value
|
|
PBKDF2
|
00000001
|
|
HASH
|
00000002
|
|
HMAC
|
00000003
|
|
ENCRYPT
|
00000004
|
|
NIST800-108-C
|
00000005
|
|
NIST800-108-F
|
00000006
|
|
NIST800-108-DPI
|
00000007
|
|
Asymmetric Key
|
00000008
|
|
Extensions
|
8XXXXXXX
|
Table
309: Derivation Method Enumeration
The PGP certificate request type is deprecated as of version
1.1 of this specification and MAY be removed from subsequent versions of the
specification.
|
Certificate
Request Type
|
|
Name
|
Value
|
|
CRMF
|
00000001
|
|
PKCS#10
|
00000002
|
|
PEM
|
00000003
|
|
PGP
|
00000004 (deprecated)
|
|
Extensions
|
8XXXXXXX
|
Table
310: Certificate Request Type Enumeration
|
Validity
Indicator
|
|
Name
|
Value
|
|
Valid
|
00000001
|
|
Invalid
|
00000002
|
|
Unknown
|
00000003
|
|
Extensions
|
8XXXXXXX
|
Table
311: Validity Indicator Enumeration
|
Query Function
|
|
Name
|
Value
|
|
Query Operations
|
00000001
|
|
Query Objects
|
00000002
|
|
Query Server Information
|
00000003
|
|
Query Application Namespaces
|
00000004
|
|
Query Extension List
|
00000005
|
|
Query Extension Map
|
00000006
|
|
Query Attestation Types
|
00000007
|
|
Query RNGs
|
00000008
|
|
Query Validations
|
00000009
|
|
Query Profiles
|
0000000A
|
|
Query Capabilities
|
0000000B
|
|
Query Client Registration Methods
|
0000000C
|
|
Extensions
|
8XXXXXXX
|
Table
312: Query Function Enumeration
|
Cancellation
Result
|
|
Name
|
Value
|
|
Canceled
|
00000001
|
|
Unable to Cancel
|
00000002
|
|
Completed
|
00000003
|
|
Failed
|
00000004
|
|
Unavailable
|
00000005
|
|
Extensions
|
8XXXXXXX
|
Table
313: Cancellation Result Enumeration
|
Put Function
|
|
Name
|
Value
|
|
New
|
00000001
|
|
Replace
|
00000002
|
|
Extensions
|
8XXXXXXX
|
Table
314: Put Function Enumeration
|
Operation
|
|
Name
|
Value
|
|
Create
|
00000001
|
|
Create Key Pair
|
00000002
|
|
Register
|
00000003
|
|
Re-key
|
00000004
|
|
Derive Key
|
00000005
|
|
Certify
|
00000006
|
|
Re-certify
|
00000007
|
|
Locate
|
00000008
|
|
Check
|
00000009
|
|
Get
|
0000000A
|
|
Get Attributes
|
0000000B
|
|
Get Attribute List
|
0000000C
|
|
Add Attribute
|
0000000D
|
|
Modify Attribute
|
0000000E
|
|
Delete Attribute
|
0000000F
|
|
Obtain Lease
|
00000010
|
|
Get Usage Allocation
|
00000011
|
|
Activate
|
00000012
|
|
Revoke
|
00000013
|
|
Destroy
|
00000014
|
|
Archive
|
00000015
|
|
Recover
|
00000016
|
|
Validate
|
00000017
|
|
Query
|
00000018
|
|
Cancel
|
00000019
|
|
Poll
|
0000001A
|
|
Notify
|
0000001B
|
|
Put
|
0000001C
|
|
Re-key Key Pair
|
0000001D
|
|
Discover Versions
|
0000001E
|
|
Encrypt
|
0000001F
|
|
Decrypt
|
00000020
|
|
Sign
|
00000021
|
|
Signature Verify
|
00000022
|
|
MAC
|
00000023
|
|
MAC Verify
|
00000024
|
|
RNG Retrieve
|
00000025
|
|
RNG Seed
|
00000026
|
|
Hash
|
00000027
|
|
Create Split Key
|
00000028
|
|
Join Split Key
|
00000029
|
|
Import
|
0000002A
|
|
Export
|
0000002B
|
|
Extensions
|
8XXXXXXX
|
Table
315: Operation Enumeration
|
Result Status
|
|
Name
|
Value
|
|
Success
|
00000000
|
|
Operation Failed
|
00000001
|
|
Operation Pending
|
00000002
|
|
Operation Undone
|
00000003
|
|
Extensions
|
8XXXXXXX
|
Table
316: Result Status Enumeration
|
Result Reason
|
|
Name
|
Value
|
|
Item Not Found
|
00000001
|
|
Response Too Large
|
00000002
|
|
Authentication Not Successful
|
00000003
|
|
Invalid Message
|
00000004
|
|
Operation Not Supported
|
00000005
|
|
Missing Data
|
00000006
|
|
Invalid Field
|
00000007
|
|
Feature Not Supported
|
00000008
|
|
Operation Canceled By Requester
|
00000009
|
|
Cryptographic Failure
|
0000000A
|
|
Illegal Operation
|
0000000B
|
|
Permission Denied
|
0000000C
|
|
Object archived
|
0000000D
|
|
Index Out of Bounds
|
0000000E
|
|
Application Namespace Not Supported
|
0000000F
|
|
Key Format Type Not Supported
|
00000010
|
|
Key Compression Type Not Supported
|
00000011
|
|
Encoding Option Error
|
00000012
|
|
Key Value Not Present
|
00000013
|
|
Attestation Required
|
00000014
|
|
Attestation Failed
|
00000015
|
|
Sensitive
|
00000016
|
|
Not Extractable
|
00000017
|
|
Object Already Exists
|
00000018
|
|
General Failure
|
00000100
|
|
Extensions
|
8XXXXXXX
|
Table
317: Result Reason Enumeration
|
Batch Error
Continuation
|
|
Name
|
Value
|
|
Continue
|
00000001
|
|
Stop
|
00000002
|
|
Undo
|
00000003
|
|
Extensions
|
8XXXXXXX
|
Table
318: Batch Error Continuation Option Enumeration
|
Usage Limits
Unit
|
|
Name
|
Value
|
|
Byte
|
00000001
|
|
Object
|
00000002
|
|
Extensions
|
8XXXXXXX
|
Table 319: Usage Limits Unit Enumeration
|
Encoding
Option
|
|
Name
|
Value
|
|
No Encoding
|
00000001
|
|
TTLV Encoding
|
00000002
|
|
Extensions
|
8XXXXXXX
|
Table 320: Encoding Option Enumeration
|
Object Group
Member Option
|
|
Name
|
Value
|
|
Group Member Fresh
|
00000001
|
|
Group Member Default
|
00000002
|
|
Extensions
|
8XXXXXXX
|
Table 321: Object Group Member Enumeration
|
Alternative
Name Type
|
|
Name
|
Value
|
|
Uninterpreted Text String
|
00000001
|
|
URI
|
00000002
|
|
Object Serial Number
|
00000003
|
|
Email Address
|
00000004
|
|
DNS Name
|
00000005
|
|
X.500 Distinguished Name
|
00000006
|
|
IP Address
|
00000007
|
|
Extensions
|
8XXXXXXX
|
Table 322: Alternative Name Type Enumeration
|
Key Value Location
Type
|
|
Name
|
Value
|
|
Uninterpreted Text String
|
00000001
|
|
URI
|
00000002
|
|
Extensions
|
8XXXXXXX
|
Table 323: Key Value Location Type Enumeration
|
Attestation
Type
|
|
Name
|
Value
|
|
TPM Quote
|
00000001
|
|
TCG Integrity Report
|
00000002
|
|
SAML Assertion
|
00000003
|
|
Extensions
|
8XXXXXXX
|
Table 324: Attestation Type Enumeration
|
RNG Algorithm
|
|
Name
|
Value
|
|
Unspecified
|
00000001
|
|
FIPS 186-2
|
00000002
|
|
DRBG
|
00000003
|
|
NRBG
|
00000004
|
|
ANSI X9.31
|
00000005
|
|
ANSI X9.62
|
00000006
|
|
Extensions
|
8XXXXXXX
|
Note: the user should be
aware that a number of these algorithms are no longer recommended for general
use and/or are deprecated. They are included for completeness.
|
DRBG Algorithm
|
|
Name
|
Value
|
|
Unspecified
|
00000001
|
|
Dual-EC
|
00000002
|
|
Hash
|
00000003
|
|
HMAC
|
00000004
|
|
CTR
|
00000005
|
|
Extensions
|
8XXXXXXX
|
|
FIPS186
Variation
|
|
Name
|
Value
|
|
Unspecified
|
00000001
|
|
GP x-Original
|
00000002
|
|
GP x-Change Notice
|
00000003
|
|
x-Original
|
00000004
|
|
x-Change Notice
|
00000005
|
|
k-Original
|
00000006
|
|
k-Change Notice
|
00000007
|
|
Extensions
|
8XXXXXXX
|
Note: the user should be
aware that a number of these algorithms are no longer recommended for general
use and/or are deprecated. They are included for completeness.
|
Validation
Authority Type
|
|
Name
|
Value
|
|
Unspecified
|
00000001
|
|
NIST CMVP
|
00000002
|
|
Common Criteria
|
00000003
|
|
Extensions
|
8XXXXXXX
|
|
Validation
Type
|
|
Name
|
Value
|
|
Unspecified
|
00000001
|
|
Hardware
|
00000002
|
|
Software
|
00000003
|
|
Firmware
|
00000004
|
|
Hybrid
|
00000005
|
|
Extensions
|
8XXXXXXX
|
|
Profile Name
Type
|
|
Name
|
Value
|
|
Baseline Server Basic KMIP v1.2
|
00000001
|
|
Baseline Server TLS v1.2 KMIP v1.2
|
00000002
|
|
Baseline Client Basic KMIP v1.2
|
00000003
|
|
Baseline Client TLS v1.2 KMIP v1.2
|
00000004
|
|
Complete Server Basic KMIP v1.2
|
00000005
|
|
Complete Server TLS v1.2 KMIP v1.2
|
00000006
|
|
Tape Library Client KMIP v1.0
|
00000007
|
|
Tape Library Client KMIP v1.1
|
00000008
|
|
Tape Library Client KMIP v1.2
|
00000009
|
|
Tape Library Server KMIP v1.0
|
0000000A
|
|
Tape Library Server KMIP v1.1
|
0000000B
|
|
Tape Library Server KMIP v1.2
|
0000000C
|
|
Symmetric Key Lifecycle Client KMIP v1.0
|
0000000D
|
|
Symmetric Key Lifecycle Client KMIP v1.1
|
0000000E
|
|
Symmetric Key Lifecycle Client KMIP v1.2
|
0000000F
|
|
Symmetric Key Lifecycle Server KMIP v1.0
|
00000010
|
|
Symmetric Key Lifecycle Server KMIP v1.1
|
00000011
|
|
Symmetric Key Lifecycle Server KMIP v1.2
|
00000012
|
|
Asymmetric Key Lifecycle Client KMIP v1.0
|
00000013
|
|
Asymmetric Key Lifecycle Client KMIP v1.1
|
00000014
|
|
Asymmetric Key Lifecycle Client KMIP v1.2
|
00000015
|
|
Asymmetric Key Lifecycle Server KMIP v1.0
|
00000016
|
|
Asymmetric Key Lifecycle Server KMIP v1.1
|
00000017
|
|
Asymmetric Key Lifecycle Server KMIP v1.2
|
00000018
|
|
Basic Cryptographic Client KMIP v1.2
|
00000019
|
|
Basic Cryptographic Server KMIP v1.2
|
0000001A
|
|
Advanced Cryptographic Client KMIP v1.2
|
0000001B
|
|
Advanced Cryptographic Server KMIP v1.2
|
0000001C
|
|
RNG Cryptographic Client KMIP v1.2
|
0000001D
|
|
RNG Cryptographic Server KMIP v1.2
|
0000001E
|
|
Basic Symmetric Key Foundry Client KMIP v1.0
|
0000001F
|
|
Intermediate Symmetric Key Foundry Client KMIP v1.0
|
00000020
|
|
Advanced Symmetric Key Foundry Client KMIP v1.0
|
00000021
|
|
Basic Symmetric Key Foundry Client KMIP v1.1
|
00000022
|
|
Intermediate Symmetric Key Foundry Client KMIP v1.1
|
00000023
|
|
Advanced Symmetric Key Foundry Client KMIP v1.1
|
00000024
|
|
Basic Symmetric Key Foundry Client KMIP v1.2
|
00000025
|
|
Intermediate Symmetric Key Foundry Client KMIP v1.2
|
00000026
|
|
Advanced Symmetric Key Foundry Client KMIP v1.2
|
00000027
|
|
Symmetric Key Foundry Server KMIP v1.0
|
00000028
|
|
Symmetric Key Foundry Server KMIP v1.1
|
00000029
|
|
Symmetric Key Foundry Server KMIP v1.2
|
0000002A
|
|
Opaque Managed Object Store Client KMIP v1.0
|
0000002B
|
|
Opaque Managed Object Store Client KMIP v1.1
|
0000002C
|
|
Opaque Managed Object Store Client KMIP v1.2
|
0000002D
|
|
Opaque Managed Object Store Server KMIP v1.0
|
0000002E
|
|
Opaque Managed Object Store Server KMIP v1.1
|
0000002F
|
|
Opaque Managed Object Store Server KMIP v1.2
|
00000030
|
|
Suite B minLOS_128 Client KMIP v1.0
|
00000031
|
|
Suite B minLOS_128 Client KMIP v1.1
|
00000032
|
|
Suite B minLOS_128 Client KMIP v1.2
|
00000033
|
|
Suite B minLOS_128 Server KMIP v1.0
|
00000034
|
|
Suite B minLOS_128 Server KMIP v1.1
|
00000035
|
|
Suite B minLOS_128 Server KMIP v1.2
|
00000036
|
|
Suite B minLOS_192 Client KMIP v1.0
|
00000037
|
|
Suite B minLOS_192 Client KMIP v1.1
|
00000038
|
|
Suite B minLOS_192 Client KMIP v1.2
|
00000039
|
|
Suite B minLOS_192 Server KMIP v1.0
|
0000003A
|
|
Suite B minLOS_192 Server KMIP v1.1
|
0000003B
|
|
Suite B minLOS_192 Server KMIP v1.2
|
0000003C
|
|
Storage Array with Self Encrypting Drive Client KMIP
v1.0
|
0000003D
|
|
Storage Array with Self Encrypting Drive Client KMIP
v1.1
|
0000003E
|
|
Storage Array with Self Encrypting Drive Client KMIP
v1.2
|
0000003F
|
|
Storage Array with Self Encrypting Drive Server KMIP
v1.0
|
00000040
|
|
Storage Array with Self Encrypting Drive Server KMIP
v1.1
|
00000041
|
|
Storage Array with Self Encrypting Drive Server KMIP
v1.2
|
00000042
|
|
HTTPS Client KMIP v1.0
|
00000043
|
|
HTTPS Client KMIP v1.1
|
00000044
|
|
HTTPS Client KMIP v1.2
|
00000045
|
|
HTTPS Server KMIP v1.0
|
00000046
|
|
HTTPS Server KMIP v1.1
|
00000047
|
|
HTTPS Server KMIP v1.2
|
00000048
|
|
JSON Client KMIP v1.0
|
00000049
|
|
JSON Client KMIP v1.1
|
0000004A
|
|
JSON Client KMIP v1.2
|
0000004B
|
|
JSON Server KMIP v1.0
|
0000004C
|
|
JSON Server KMIP v1.1
|
0000004D
|
|
JSON Server KMIP v1.2
|
0000004E
|
|
XML Client KMIP v1.0
|
0000004F
|
|
XML Client KMIP v1.1
|
00000050
|
|
XML Client KMIP v1.2
|
00000051
|
|
XML Server KMIP v1.0
|
00000052
|
|
XML Server KMIP v1.1
|
00000053
|
|
XML Server KMIP v1.2
|
00000054
|
|
Baseline Server Basic KMIP v1.3
|
00000055
|
|
Baseline Server TLS v1.2 KMIP v1.3
|
00000056
|
|
Baseline Client Basic KMIP v1.3
|
00000057
|
|
Baseline Client TLS v1.2 KMIP v1.3
|
00000058
|
|
Complete Server Basic KMIP v1.3
|
00000059
|
|
Complete Server TLS v1.2 KMIP v1.3
|
0000005A
|
|
Tape Library Client KMIP v1.3
|
0000005B
|
|
Tape Library Server KMIP v1.3
|
0000005C
|
|
Symmetric Key Lifecycle Client KMIP v1.3
|
0000005D
|
|
Symmetric Key Lifecycle Server KMIP v1.3
|
0000005E
|
|
Asymmetric Key Lifecycle Client KMIP v1.3
|
0000005F
|
|
Asymmetric Key Lifecycle Server KMIP v1.3
|
00000060
|
|
Basic Cryptographic Client KMIP v1.3
|
00000061
|
|
Basic Cryptographic Server KMIP v1.3
|
00000062
|
|
Advanced Cryptographic Client KMIP v1.3
|
00000063
|
|
Advanced Cryptographic Server KMIP v1.3
|
00000064
|
|
RNG Cryptographic Client KMIP v1.3
|
00000065
|
|
RNG Cryptographic Server KMIP v1.3
|
00000066
|
|
Basic Symmetric Key Foundry Client KMIP v1.3
|
00000067
|
|
Intermediate Symmetric Key Foundry Client KMIP v1.3
|
00000068
|
|
Advanced Symmetric Key Foundry Client KMIP v1.3
|
00000069
|
|
Symmetric Key Foundry Server KMIP v1.3
|
0000006A
|
|
Opaque Managed Object Store Client KMIP v1.3
|
0000006B
|
|
Opaque Managed Object Store Server KMIP v1.3
|
0000006C
|
|
Suite B minLOS_128 Client KMIP v1.3
|
0000006D
|
|
Suite B minLOS_128 Server KMIP v1.3
|
0000006E
|
|
Suite B minLOS_192 Client KMIP v1.3
|
0000006F
|
|
Suite B minLOS_192 Server KMIP v1.3
|
00000070
|
|
Storage Array with Self Encrypting Drive Client KMIP
v1.3
|
00000071
|
|
Storage Array with Self Encrypting Drive Server KMIP
v1.3
|
00000072
|
|
HTTPS Client KMIP v1.3
|
00000073
|
|
HTTPS Server KMIP v1.3
|
00000074
|
|
JSON Client KMIP v1.3
|
00000075
|
|
JSON Server KMIP v1.3
|
00000076
|
|
XML Client KMIP v1.3
|
00000077
|
|
XML Server KMIP v1.3
|
00000078
|
|
Baseline Server Basic KMIP v1.4
|
00000079
|
|
Baseline Server TLS v1.2 KMIP v1.4
|
0000007A
|
|
Baseline Client Basic KMIP v1.4
|
0000007B
|
|
Baseline Client TLS v1.2 KMIP v1.4
|
0000007C
|
|
Complete Server Basic KMIP v1.4
|
0000007D
|
|
Complete Server TLS v1.2 KMIP v1.4
|
0000007E
|
|
Tape Library Client KMIP v1.4
|
0000007F
|
|
Tape Library Server KMIP v1.4
|
00000080
|
|
Symmetric Key Lifecycle Client KMIP v1.4
|
00000081
|
|
Symmetric Key Lifecycle Server KMIP v1.4
|
00000082
|
|
Asymmetric Key Lifecycle Client KMIP v1.4
|
00000083
|
|
Asymmetric Key Lifecycle Server KMIP v1.4
|
00000084
|
|
Basic Cryptographic Client KMIP v1.4
|
00000085
|
|
Basic Cryptographic Server KMIP v1.4
|
00000086
|
|
Advanced Cryptographic Client KMIP v1.4
|
00000087
|
|
Advanced Cryptographic Server KMIP v1.4
|
00000088
|
|
RNG Cryptographic Client KMIP v1.4
|
00000089
|
|
RNG Cryptographic Server KMIP v1.4
|
0000008A
|
|
Basic Symmetric Key Foundry Client KMIP v1.4
|
0000008B
|
|
Intermediate Symmetric Key Foundry Client KMIP v1.4
|
0000008C
|
|
Advanced Symmetric Key Foundry Client KMIP v1.4
|
0000008D
|
|
Symmetric Key Foundry Server KMIP v1.4
|
0000008E
|
|
Opaque Managed Object Store Client KMIP v1.4
|
0000008F
|
|
Opaque Managed Object Store Server KMIP v1.4
|
00000090
|
|
Suite B minLOS_128 Client KMIP v1.4
|
00000091
|
|
Suite B minLOS_128 Server KMIP v1.4
|
00000092
|
|
Suite B minLOS_192 Client KMIP v1.4
|
00000093
|
|
Suite B minLOS_192 Server KMIP v1.4
|
00000094
|
|
Storage Array with Self Encrypting Drive Client KMIP
v1.4
|
00000095
|
|
Storage Array with Self Encrypting Drive Server KMIP
v1.4
|
00000096
|
|
HTTPS Client KMIP v1.4
|
00000097
|
|
HTTPS Server KMIP v1.4
|
00000098
|
|
JSON Client KMIP v1.4
|
00000099
|
|
JSON Server KMIP v1.4
|
0000009A
|
|
XML Client KMIP v1.4
|
0000009B
|
|
XML Server KMIP v1.4
|
0000009C
|
|
Extensions
|
8XXXXXXX
|
|
Unwrap Mode
|
|
Name
|
Value
|
|
Unspecified
|
00000001
|
|
Processed
|
00000002
|
|
Not Processed
|
00000003
|
|
Extensions
|
8XXXXXXX
|
|
Destroy Action
Type
|
|
Name
|
Value
|
|
Unspecified
|
00000001
|
|
Key Material Deleted
|
00000002
|
|
Key Material Shredded
|
00000003
|
|
Meta Data Deleted
|
00000004
|
|
Meta Data Shredded
|
00000005
|
|
Deleted
|
00000006
|
|
Shredded
|
00000007
|
|
Extensions
|
8XXXXXXX
|
|
Shredding
Algorithm
|
|
Name
|
Value
|
|
Unspecified
|
00000001
|
|
Cryptographic
|
00000002
|
|
Unsupported
|
00000003
|
|
Extensions
|
8XXXXXXX
|
|
RNG Mode
|
|
Name
|
Value
|
|
Unspecified
|
00000001
|
|
Shared Instantiation
|
00000002
|
|
Non-Shared Instantiation
|
00000003
|
|
Extensions
|
8XXXXXXX
|
|
Client
Registration Method
|
|
Name
|
Value
|
|
Unspecified
|
00000001
|
|
Server Pre-Generated
|
00000002
|
|
Server On-Demand
|
00000003
|
|
Client Generated
|
00000004
|
|
Client Registered
|
00000005
|
|
Extensions
|
8XXXXXXX
|
|
Key Wrap Type
|
|
Name
|
Value
|
|
Not Wrapped
|
00000001
|
|
As Registered
|
00000002
|
|
Extensions
|
8XXXXXXX
|
|
Mask Generator
|
|
Name
|
Value
|
|
MGF1
|
00000001
|
|
Extensions
|
8XXXXXXX
|
9.1.3.3.1
Cryptographic Usage Mask
|
Cryptographic
Usage Mask
|
|
Name
|
Value
|
|
Sign
|
00000001
|
|
Verify
|
00000002
|
|
Encrypt
|
00000004
|
|
Decrypt
|
00000008
|
|
Wrap Key
|
00000010
|
|
Unwrap Key
|
00000020
|
|
Export
|
00000040
|
|
MAC Generate
|
00000080
|
|
MAC Verify
|
00000100
|
|
Derive Key
|
00000200
|
|
Content Commitment
(Non Repudiation)
|
00000400
|
|
Key Agreement
|
00000800
|
|
Certificate Sign
|
00001000
|
|
CRL Sign
|
00002000
|
|
Generate Cryptogram
|
00004000
|
|
Validate Cryptogram
|
00008000
|
|
Translate Encrypt
|
00010000
|
|
Translate Decrypt
|
00020000
|
|
Translate Wrap
|
00040000
|
|
Translate Unwrap
|
00080000
|
|
Extensions
|
XXX00000
|
Table 325: Cryptographic Usage Mask
This list takes into
consideration values which MAY appear in the Key Usage extension in an X.509
certificate.
9.1.3.3.2 Storage Status Mask
|
Storage Status
Mask
|
|
Name
|
Value
|
|
On-line storage
|
00000001
|
|
Archival storage
|
00000002
|
|
Extensions
|
XXXXXXX0
|
Table
326: Storage Status Mask
KMIP Servers and Clients SHALL
establish and maintain channel confidentiality and integrity, and provide
assurance of authenticity for KMIP messaging as specified in [KMIP-Prof].
This section details the specific Result Reasons that
SHALL be returned for errors detected.
11.1 General
These errors MAY occur when
any protocol message is received by the server or client (in response to
server-to-client operations).
|
Error
Definition
|
Action
|
Result
Reason
|
|
Protocol
major version mismatch
|
Response
message containing a header and a Batch Item without Operation, but with the
Result Status field set to Operation Failed
|
Invalid
Message
|
|
Error
parsing batch item or payload within batch item
|
Batch
item fails; Result Status is Operation Failed
|
Invalid
Message
|
|
The
same field is contained in a header/batch item/payload more than once
|
Result
Status is Operation Failed
|
Invalid
Message
|
|
Same
major version, different minor versions; unknown fields/fields the server
does not understand
|
Ignore
unknown fields, process rest normally
|
N/A
|
|
Same
major & minor version, unknown field
|
Result
Status is Operation Failed
|
Invalid
Field
|
|
Client
is not allowed to perform the specified operation
|
Result
Status is Operation Failed
|
Permission
Denied
|
|
Maximum
Response Size has been exceeded
|
Result
Status is Operation Failed
|
Response
Too Large
|
|
Server
does not support operation
|
Result
Status is Operation Failed
|
Operation
Not Supported
|
|
The
Criticality Indicator in a Message Extension structure is set to True, but
the server does not understand the extension
|
Result
Status is Operation Failed
|
Feature
Not Supported
|
|
Message
cannot be parsed
|
Response
message containing a header and a Batch Item without Operation, but with the
Result Status field set to Operation Failed
|
Invalid
Message
|
|
Operation
requires attestation data which was not provided by the client, and the
client has set the Attestation Capable indicator to True
|
Result
Status is Operation Failed
|
Attestation
Required
|
|
Operation
requires attestation data which was not provided by the client, and the
client has set the Attestation Capable indicator to False
|
Result
Status is Operation Failed
|
Permission
Denied
|
|
Operation
requires attestation data and the attestation data provided by the client
does not validate
|
Result
Status is Operation Failed
|
Attestation
Failed
|
Table
327: General Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
Object
Type is not recognized
|
Operation
Failed
|
Invalid
Field
|
|
Templates
that do not exist are given in request
|
Operation
Failed
|
Item
Not Found
|
|
Incorrect
attribute value(s) specified
|
Operation
Failed
|
Invalid
Field
|
|
Error
creating cryptographic object
|
Operation
Failed
|
Cryptographic
Failure
|
|
Trying
to set more instances than the server supports of an attribute that MAY have
multiple instances
|
Operation
Failed
|
Index
Out of Bounds
|
|
Trying
to create a new object with the same Name attribute value as an existing
object
|
Operation
Failed
|
Invalid
Field
|
|
The
particular Application Namespace is not supported, and Application Data
cannot be generated if it was omitted from the client request
|
Operation
Failed
|
Application
Namespace Not Supported
|
|
Template
object is archived
|
Operation
Failed
|
Object
Archived
|
Table
328: Create Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
Templates
that do not exist are given in request
|
Operation
Failed
|
Item
Not Found
|
|
Incorrect
attribute value(s) specified
|
Operation
Failed
|
Invalid
Field
|
|
Error
creating cryptographic object
|
Operation
Failed
|
Cryptographic
Failure
|
|
Trying
to create a new object with the same Name attribute value as an existing
object
|
Operation
Failed
|
Invalid
Field
|
|
Trying
to set more instances than the server supports of an attribute that MAY have
multiple instances
|
Operation
Failed
|
Index
Out of Bounds
|
|
REQUIRED
field(s) missing
|
Operation
Failed
|
Invalid
Message
|
|
The
particular Application Namespace is not supported, and Application Data
cannot be generated if it was omitted from the client request
|
Operation
Failed
|
Application
Namespace Not Supported
|
|
Template
object is archived
|
Operation
Failed
|
Object
Archived
|
Table
329: Create Key Pair Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
Object
Type is not recognized
|
Operation
Failed
|
Invalid
Field
|
|
Object
Type does not match type of cryptographic object provided
|
Operation
Failed
|
Invalid
Field
|
|
Templates
that do not exist are given in request
|
Operation
Failed
|
Item
Not Found
|
|
Incorrect
attribute value(s) specified
|
Operation
Failed
|
Invalid
Field
|
|
Trying
to register a new Template object containing a Name attribute with the
Template structure
|
Operation
Failed
|
Invalid
Field
|
|
Trying
to register a new object with the same Name attribute value as an existing
object
|
Operation
Failed
|
Invalid
Field
|
|
Trying
to set more instances than the server supports of an attribute that MAY have
multiple instances
|
Operation
Failed
|
Index
Out of Bounds
|
|
The
particular Application Namespace is not supported, and Application Data
cannot be generated if it was omitted from the client request
|
Operation
Failed
|
Application
Namespace Not Supported
|
|
Template
object is archived
|
Operation
Failed
|
Object
Archived
|
|
Encoding
Option not permitted when Key Wrapping Specification contains attribute names
|
Operation
Failed
|
Encoding
Option Error
|
|
Key Format
Type is PKCS#12, but missing or multiple PKCS#12 Password Links
|
Operation
Failed
|
Invalid
Field
|
|
Key Format Type is PKCS#12,
but
PKCS#12 Password Link does
not
contain the Unique
Identifier of a
Secret
Data object or the Secret Data Type is not Password.
|
Operation
Failed
|
Invalid
Field
|
Table
330: Register Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
|
Object
specified is not able to be re-keyed
|
Operation
Failed
|
Permission
Denied
|
|
Offset
field is not permitted to be specified at the same time as any of the
Activation Date, Process Start Date, Protect Stop Date, or Deactivation Date
attributes
|
Operation
Failed
|
Invalid
Message
|
|
Cryptographic
error during re-key
|
Operation
Failed
|
Cryptographic
Failure
|
|
The
particular Application Namespace is not supported, and Application Data
cannot be generated if it was omitted from the client request
|
Operation
Failed
|
Application
Namespace Not Supported
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
|
An
offset cannot be used to specify new Process Start, Protect Stop and/or
Deactivation Date attribute values since no Activation Date has been
specified for the existing key
|
Operation
Failed
|
Illegal
Operation
|
|
The
Key Value is not present on the server
|
Operation
Failed
|
Key
Value Not Present
|
Table
331: Re-key Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
|
Object
specified is not able to be re-keyed
|
Operation
Failed
|
Permission
Denied
|
|
Offset
field is not permitted to be specified at the same time as any of the
Activation Date or Deactivation Date attributes
|
Operation
Failed
|
Invalid
Message
|
|
Cryptographic
error during re-key
|
Operation
Failed
|
Cryptographic
Failure
|
|
The
particular Application Namespace is not supported, and Application Data
cannot be generated if it was omitted from the client request
|
Operation
Failed
|
Application
Namespace Not Supported
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
|
An
offset cannot be used to specify new Process Start, Protect Stop and/or
Deactivation Date attribute values since no Activation Date has been
specified for the existing key
|
Operation
Failed
|
Illegal
Operation
|
|
The
Key Value is not present on the server
|
Operation
Failed
|
Key
Value Not Present
|
Table 332: Re-key Key Pair Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
One or
more of the objects specified do not exist
|
Operation
Failed
|
Item
Not Found
|
|
One
or more of the objects specified are not of the correct type
|
Operation
Failed
|
Invalid
Field
|
|
Templates
that do not exist are given in request
|
Operation
Failed
|
Item
Not Found
|
|
Invalid
Derivation Method
|
Operation
Failed
|
Invalid
Field
|
|
Invalid
Derivation Parameters
|
Operation
Failed
|
Invalid
Field
|
|
Ambiguous
derivation data provided both with Derivation Data and Secret Data object.
|
Operation
Failed
|
Invalid
Message
|
|
Incorrect
attribute value(s) specified
|
Operation
Failed
|
Invalid
Field
|
|
One
or more of the specified objects are not able to be used to derive a new key
|
Operation
Failed
|
Invalid
Field
|
|
Trying
to derive a new key with the same Name attribute value as an existing object
|
Operation
Failed
|
Invalid
Field
|
|
The
particular Application Namespace is not supported, and Application Data
cannot be generated if it was omitted from the client request
|
Operation
Failed
|
Application
Namespace Not Supported
|
|
One
or more of the objects is archived
|
Operation
Failed
|
Object
Archived
|
|
The
specified length exceeds the output of the derivation method or other
cryptographic error during derivation.
|
Operation
Failed
|
Cryptographic
Failure
|
|
The
Key Value is not present on the server
|
Operation
Failed
|
Key
Value Not Present
|
|
|
|
|
|
Table 333: Derive Key Errors-
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
|
Object
specified is not able to be certified
|
Operation
Failed
|
Permission
Denied
|
|
The
Certificate Request does not contain a signed certificate request of the
specified Certificate Request Type
|
Operation
Failed
|
Invalid
Field
|
|
The
particular Application Namespace is not supported, and Application Data
cannot be generated if it was omitted from the client request
|
Operation
Failed
|
Application
Namespace Not Supported
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
Table
334: Certify Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
|
Object
specified is not able to be certified
|
Operation
Failed
|
Permission
Denied
|
|
The
Certificate Request does not contain a signed certificate request of the
specified Certificate Request Type
|
Operation
Failed
|
Invalid
Field
|
|
Offset
field is not permitted to be specified at the same time as any of the
Activation Date or Deactivation Date attributes
|
Operation
Failed
|
Invalid
Message
|
|
The
particular Application Namespace is not supported, and Application Data
cannot be generated if it was omitted from the client request
|
Operation
Failed
|
Application
Namespace Not Supported
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
Table
335: Re-certify Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
Non-existing
attributes, attributes that the server does not understand or templates that
do not exist are given in the request
|
Operation
Failed
|
Invalid
Field
|
Table
336: Locate Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
Object
does not exist
|
Operation
Failed
|
Item
Not Found
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
|
Check
cannot be performed on this object
|
Operation
Failed
|
Illegal
Operation
|
|
The
client is not allowed to use the object according to the specified attributes
|
Operation
Failed
|
Permission
Denied
|
Table
337: Check Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
Object
does not exist
|
Operation
Failed
|
Item
Not Found
|
|
Wrapping
key does not exist
|
Operation
Failed
|
Item
Not Found
|
|
Object
with Encryption Key Information exists, but it is not a key
|
Operation
Failed
|
Illegal
Operation
|
|
Object
with Encryption Key Information exists, but it is not able to be used for
wrapping
|
Operation
Failed
|
Permission
Denied
|
|
Object
with MAC/Signature Key Information exists, but it is not a key
|
Operation
Failed
|
Illegal
Operation
|
|
Object
with MAC/Signature Key Information exists, but it is not able to be used for
MACing/signing
|
Operation
Failed
|
Permission
Denied
|
|
Object
exists but cannot be provided in the desired Key Format Type and/or Key
Compression Type
|
Operation
Failed
|
Key
Format Type and/or Key Compression Type Not Supported
|
|
Object
exists and is not a Template, but the server only has attributes for this
object
|
Operation
Failed
|
Illegal
Operation
|
|
Cryptographic
Parameters associated with the object do not exist or do not match those
provided in the Encryption Key Information and/or Signature Key Information
|
Operation
Failed
|
Item
Not Found
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
|
Object
exists but cannot be provided in the desired Encoding Option
|
Operation
Failed
|
Encoding
Option Error
|
|
Encoding
Option not permitted when Key Wrapping Specification contains attribute names
|
Operation
Failed
|
Encoding
Option Error
|
|
Key
Wrap Type is not supported by the server.
|
Operation
Failed
|
Not
Supported.
|
|
Object
is Sensitive
|
Operation
Failed
|
Sensitive
|
|
Object
is not Extractable
|
Operation
Failed
|
Not
Extractble
|
Table
338: Get Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
|
The
same Attribute Name is present more than once
|
Operation
Failed
|
Invalid
Message
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
Table
339: Get Attributes Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
Table
340: Get Attribute List Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
|
Attempt
to add a read-only attribute
|
Operation
Failed
|
Permission
Denied
|
|
Attempt
to add an attribute that is not supported for this object
|
Operation
Failed
|
Permission
Denied
|
|
The specified
attribute already exists
|
Operation
Failed
|
Illegal
Operation
|
|
New
attribute contains Attribute Index
|
Operation
Failed
|
Invalid
Field
|
|
Trying
to add a Name attribute with the same value that another object already has
|
Operation
Failed
|
Illegal
Operation
|
|
Trying
to add a new instance to an attribute with multiple instances but the server
limit on instances has been reached
|
Operation
Failed
|
Index
Out of Bounds
|
|
The
particular Application Namespace is not supported, and Application Data
cannot be generated if it was omitted from the client request
|
Operation
Failed
|
Application
Namespace Not Supported
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
Table
341: Add Attribute Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
|
A
specified attribute does not exist (i.e., it needs to first be added)
|
Operation
Failed
|
Invalid
Field
|
|
No
matching attribute instance exists
|
Operation
Failed
|
Item
Not Found
|
|
The
specified attribute is read-only
|
Operation
Failed
|
Permission
Denied
|
|
Trying
to set the Name attribute value to a value already used by another object
|
Operation
Failed
|
Illegal
Operation
|
|
The
particular Application Namespace is not supported, and Application Data
cannot be generated if it was omitted from the client request
|
Operation
Failed
|
Application
Namespace Not Supported
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
Table
342: Modify Attribute Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
|
Attempt
to delete a read-only/REQUIRED attribute
|
Operation
Failed
|
Permission
Denied
|
|
No
matching attribute instance exists
|
Operation
Failed
|
Item
Not Found
|
|
No
attribute with the specified name exists
|
Operation
Failed
|
Item
Not Found
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
Table
343: Delete Attribute Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
|
The
server determines that a new lease is not permitted to be issued for the
specified cryptographic object
|
Operation
Failed
|
Permission
Denied
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
Table
344: Obtain Lease Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
|
Object
has no Usage Limits attribute, or the object is not able to be used for
applying cryptographic protection
|
Operation
Failed
|
Illegal
Operation
|
|
No
Usage Limits Count is specified
|
Operation
Failed
|
Invalid
Message
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
|
The
server was not able to grant the requested amount of usage allocation
|
Operation
Failed
|
Permission
Denied
|
Table
345: Get Usage Allocation Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
|
Unique
Identifier specifies a template or other object that is not able to be
activated
|
Operation
Failed
|
Illegal
Operation
|
|
Object
is not in Pre-Active state
|
Operation
Failed
|
Permission
Denied
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
Table
346: Activate Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
|
Revocation
Reason is not recognized
|
Operation
Failed
|
Invalid
Field
|
|
Unique
Identifier specifies a template or other object that is not able to be
revoked
|
Operation
Failed
|
Illegal
Operation
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
Table
347: Revoke Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
|
Object
exists, but has already been destroyed
|
Operation
Failed
|
Permission
Denied
|
|
Object
is not in Pre-Active, Deactivated or Compromised state
|
Operation
Failed
|
Permission
Denied
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
Table
348: Destroy Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
|
Object
is already archived
|
Operation
Failed
|
Object
Archived
|
Table
349: Archive Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
Table
350: Recover Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
The
combination of Certificate Objects and Unique Identifiers does not specify a
certificate list
|
Operation
Failed
|
Invalid
Message
|
|
One
or more of the objects is archived
|
Operation
Failed
|
Object
Archived
|
Table
351: Validate Errors
N/A
N/A
N/A
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
outstanding operation with the specified Asynchronous Correlation Value
exists
|
Operation
Failed
|
Item
Not Found
|
Table
352: Poll Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
|
Object
specified is not able to be used for encryption
|
Operation
Failed
|
Permission
Denied
|
|
Cryptographic
error during encryption
|
Operation
Failed
|
Cryptographic
Failure
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
|
The
Key Value is not present on the server
|
Operation
Failed
|
Key
Value Not Present
|
|
No
outstanding operation with the specified Correlation Value exists
|
Operation
Failed
|
Item
Not Found
|
Table 353: Encrypt Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
|
Object
specified is not able to be used for decryption
|
Operation
Failed
|
Permission
Denied
|
|
Cryptographic
error during decryption
|
Operation
Failed
|
Cryptographic
Failure
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
|
The
Key Value is not present on the server
|
Operation
Failed
|
Key
Value Not Present
|
|
No
outstanding operation with the specified Correlation Value exists
|
Operation
Failed
|
Item
Not Found
|
Table 354: Decrypt Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
|
Object
specified is not able to be used for signing
|
Operation
Failed
|
Permission
Denied
|
|
Cryptographic
error during signing
|
Operation
Failed
|
Cryptographic
Failure
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
|
The
Key Value is not present on the server
|
Operation
Failed
|
Key
Value Not Present
|
|
No
outstanding operation with the specified Correlation Value exists
|
Operation
Failed
|
Item
Not Found
|
Table 355: Sign Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
|
Object
specified is not able to be used for signature verification
|
Operation
Failed
|
Permission
Denied
|
|
Cryptographic
error during signature verification
|
Operation
Failed
|
Cryptographic
Failure
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
|
The
Key Value is not present on the server
|
Operation
Failed
|
Key
Value Not Present
|
|
No
outstanding operation with the specified Correlation Value exists
|
Operation
Failed
|
Item
Not Found
|
Table 356: Signature Verify Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No
object with the specified Unique Identifier exists
|
Operation
Failed
|
Item
Not Found
|
|
Object
specified is not able to be used for MACing
|
Operation
Failed
|
Permission
Denied
|
|
Cryptographic
error during MACing
|
Operation
Failed
|
Cryptographic
Failure
|
|
Object
is archived
|
Operation
Failed
|
Object
Archived
|
|
The
Key Value is not present on the server
|
Operation
Failed
|
Key
Value Not Present
|
|
No
outstanding operation with the specified Correlation Value exists
|
Operation
Failed
|
Item
Not Found
|
Table 357: MAC Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
No object with the specified Unique Identifier
exists
|
Operation Failed
|
Item Not Found
|
|
Object specified is not able to be used for MAC
verification
|
Operation Failed
|
Permission Denied
|
|
Cryptographic error during MAC verification
|
Operation Failed
|
Cryptographic Failure
|
|
Object is archived
|
Operation Failed
|
Object Archived
|
|
The Key Value is not present on the server
|
Operation Failed
|
Key Value Not Present
|
|
No outstanding operation with the specified
Correlation Value exists
|
Operation Failed
|
Item Not Found
|
Table 358: MAC Verify Errors
|
Error Definition
|
Result Status
|
Result Reason
|
|
Cryptographic error during RNG Retrieve
|
Operation Failed
|
Cryptographic Failure
|
Table 359: RNG Retrieve Errors
|
Error Definition
|
Result Status
|
Result Reason
|
|
Cryptographic error during RNG Seed
|
Operation Failed
|
Cryptographic Failure
|
Table 360: RNG Seed Errors
|
Error Definition
|
Result Status
|
Result Reason
|
|
Cryptographic error during HASH
|
Operation Failed
|
Cryptographic Failure
|
|
No outstanding operation with the specified
Correlation Value exists
|
Operation Failed
|
Item Not Found
|
Table 361: HASH Errors
|
Error Definition
|
Result Status
|
Result Reason
|
|
Object Type is not recognized
|
Operation Failed
|
Invalid Field
|
|
Templates that do not exist are given in request
|
Operation Failed
|
Item Not Found
|
|
Incorrect attribute value(s) specified
|
Operation Failed
|
Invalid Field
|
|
Error creating cryptographic object
|
Operation Failed
|
Cryptographic Failure
|
|
Trying to set more instances than the server
supports of an attribute that MAY have multiple instances
|
Operation Failed
|
Index Out of Bounds
|
|
Trying to create a new object with the same Name
attribute value as an existing object
|
Operation Failed
|
Invalid Field
|
|
The particular Application Namespace is not
supported, and Application Data cannot be generated if it was omitted from
the client request
|
Operation Failed
|
Application Namespace Not Supported
|
|
Template object is archived
|
Operation Failed
|
Object Archived
|
|
Split Key Method not supported
|
Operation Failed
|
Invalid Field
|
|
No object with the specified Unique Identifier
exists
|
Operation Failed
|
Item Not Found
|
Table 362: Create Split Key Errors
|
Error Definition
|
Result Status
|
Result Reason
|
|
Object Type is not recognized
|
Operation Failed
|
Invalid Field
|
|
Templates that do not exist are given in request
|
Operation Failed
|
Item Not Found
|
|
Incorrect attribute value(s) specified
|
Operation Failed
|
Invalid Field
|
|
Error creating cryptographic object
|
Operation Failed
|
Cryptographic Failure
|
|
Trying to set more instances than the server
supports of an attribute that MAY have multiple instances
|
Operation Failed
|
Index Out of Bounds
|
|
Trying to create a new object with the same Name
attribute value as an existing object
|
Operation Failed
|
Invalid Field
|
|
The particular Application Namespace is not
supported, and Application Data cannot be generated if it was omitted from
the client request
|
Operation Failed
|
Application Namespace Not Supported
|
|
Template object is archived
|
Operation Failed
|
Object Archived
|
|
Number of Unique Identifiers given in request is
less than Split Key Threshold
|
Operation Failed
|
Cryptographic Failure?
|
|
Split Key Method not supported
|
Operation Failed
|
Invalid Field
|
|
No object with the specified Unique Identifier exists
|
Operation Failed
|
Item Not Found
|
|
One or more of the objects is archived
|
Operation Failed
|
Object Archived
|
Table 363: Join Split Key Errors
|
Error Definition
|
Action
|
Result Reason
|
|
Object does not exist
|
Operation Failed
|
Item Not Found
|
|
Wrapping key does not exist
|
Operation Failed
|
Item Not Found
|
|
Object with Encryption Key Information
exists, but it is not a key
|
|
Illegal Operation
|
|
Object with Encryption Key Information exists,
but it is not able to be used for wrapping
|
Operation Failed
|
Permission Denied
|
|
Object with MAC/Signature Key Information
exists, but it is not a key
|
Operation Failed
|
Illegal Operation
|
|
Object with MAC/Signature Key Information
exists, but it is not able to
be used for MACing/signing
|
Operation Failed
|
Permission Denied
|
|
Object exists but cannot be provided in the
desired Key Format Type and/or Key Compression Type
|
Operation Failed
|
Key Format Type and/or Key Compression Type Not
Supported
|
|
Cryptographic Parameters associated with the
object do not exist or do not match those provided in the Encryption Key
Information and/or Signature Key Information
|
Operation Failed
|
Item Not Found
|
|
Object exists but cannot be provided in the
desired Encoding Option
|
Operation Failed
|
Encoding Option Error
|
|
Encoding Option not permitted when Key Wrapping
Specification contains attribute names
|
Operation Failed
|
Encoding Option Error
|
|
Key Wrap Type is not supported by the server
|
Operation Failed
|
Not Supported
|
Table 364: Export Errors
|
Error
Definition
|
Result
Status
|
Result
Reason
|
|
Unique
identifier already exists on the server and Replace Existing is false or not
specified.
|
Operation
Failed
|
Object
Already Exists
|
|
Object
Type is not recognized
|
Operation
Failed
|
Invalid
Field
|
|
Object
Type does not match type of cryptographic object provided
|
Operation
Failed
|
Invalid
Field
|
|
Incorrect
attribute value(s) specified
|
Operation
Failed
|
Invalid
Field
|
|
Trying
to register a new object with the same Name attribute value as an existing
object
|
Operation
Failed
|
Invalid
Field
|
|
Trying
to set more instances than the server supports of an attribute that MAY have
multiple instances
|
Operation
Failed
|
Index
Out of Bounds
|
|
The
particular Application Namespace is not supported, and Application Data
cannot be generated if it was omitted from the client request
|
Operation
Failed
|
Application
Namespace Not Supported
|
|
Encoding
Option not permitted when Key Wrapping Specification contains attribute names
|
Operation
Failed
|
Encoding
Option Error
|
|
Field
is not supported by server
|
Operation
Failed
|
Invalid
Field
|
Table 365: Import Errors
These errors MAY occur when a protocol message with one or
more batch items is processed by the server. If a message with one or more
batch items was parsed correctly, then the response message SHOULD include
response(s) to the batch item(s) in the request according to the table below.
|
Error Definition
|
Action
|
Result Reason
|
|
Processing of batch item fails with Batch Error
Continuation Option set to Stop
|
Batch item fails and Result Status is set to
Operation Failed. Responses to batch items that have already been processed
are returned normally. Responses to batch items that have not been processed
are not returned.
|
See tables above, referring to the operation
being performed in the batch item that failed
|
|
Processing of batch item fails with Batch Error
Continuation Option set to Continue
|
Batch item fails and Result Status is set to
Operation Failed. Responses to other batch items are returned normally.
|
See tables above, referring to the operation
being performed in the batch item that failed
|
|
Processing of batch item fails with Batch Error
Continuation Option set to Undo
|
Batch item fails and Result Status is set to
Operation Failed. Batch items that had been processed have been undone and
their responses are returned with Undone result status.
|
See tables above, referring to the operation
being performed in the batch item that failed
|
Table 366: Batch Items Errors
An implementation is a conforming KMIP Server if the
implementation meets the conditions specified in one or more server profiles
specified in [KMIP-Prof].
A KMIP server implementation SHALL be a conforming KMIP
Server.
If a KMIP server implementation claims support for a
particular server profile, then the implementation SHALL conform to all
normative statements within the clauses specified for that profile and for any
subclauses to each of those clauses.
An implementation is a conforming KMIP Client if the
implementation meets the conditions specified in one or more client profiles
specified in [KMIP-Prof].
A KMIP client implementation SHALL be a conforming KMIP
Client.
If a KMIP client implementation claims support for a
particular client profile, then the implementation SHALL conform to all
normative statements within the clauses specified for that profile and for any
subclauses to each of those clauses.
The following individuals have participated in the creation
of this specification and are gratefully acknowledged:
Participants:
Anthony Berglas, Cryptsoft
Justin Corlett, Cryptsoft
Tony Cox, Cryptsoft
Tim Hudson, Cryptsoft
Bruce Rich, Cryptsoft
Greg Scott, Cryptsoft
Magda Zdunkiewicz, Cryptsoft
Judith Furlong, Dell
Michael Phillips, Dell
Lina Baquero, Fornetix
Jeff Bartell, Fornetix
Stephen Edwards, Fornetix
Gary Gardner, Fornetix
Heather Stevens, Fornetix
Gerald Stueve, Fornetix
Charles White, Fornetix
Alex Downey, Futurex
Hannah Lee, Hancom Secure, Inc.
Indra Fitzgerald, Hewlett Packard
Enterprise (HPE)
Christopher Hillier, Hewlett
Packard Enterprise (HPE)
Matt Suh, Hewlett Packard
Enterprise (HPE)
Nathan Turajski, Hewlett Packard
Enterprise (HPE)
Steve Wierenga, Hewlett Packard Enterprise
(HPE)
Rinkesh Bansal, IBM
Mathias Bjorkqvist, IBM
Kevin Driver, IBM
Prashant Mestri, IBM
Krishna Yellepeddy, IBM
Andre Bereza, KRYPTUS
Tim Chevalier, NetApp
Hai-May Chao, Oracle
Valerie Fenwick, Oracle
Susan Gleeson, Oracle
Hal Lockhart, Oracle
Saikat Saha, Oracle
Radhika Siravara, Oracle
Mark Joseph, P6R, Inc
Jim Susoy, P6R, Inc
John Leiseboer, QuintessenceLabs
Pty Ltd.
David Featherstone, SafeNet, Inc.
Joseph Brand, Semper Fortis
Solutions
Chris Skiscim, Semper Fortis
Solutions
Kathy Kriese, Symantec Corp.
Robert Lockhart, Thales e-Security
Steve He, Vormetric, Inc.
Peter Tsai, Vormetric, Inc.
Joshua Zhu, Vormetric, Inc.
The following table of Attribute names indicates the
Managed Object(s) for which each attribute applies. This table is not
normative.
|
Attribute Name
|
Managed Object
|
|
Certificate
|
Symmetric Key
|
Public Key
|
Private Key
|
Split Key
|
Template
|
Secret Data
|
Opaque Object
|
PGP Key
|
|
Unique Identifier
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
|
Name
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
|
Object Type
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
|
Cryptographic Algorithm
|
x
|
x
|
x
|
x
|
x
|
x
|
|
|
x
|
|
Cryptographic Domain Parameters
|
|
|
x
|
x
|
|
x
|
|
|
|
|
Cryptographic Length
|
x
|
x
|
x
|
x
|
x
|
x
|
|
|
x
|
|
Cryptographic Parameters
|
x
|
x
|
x
|
x
|
x
|
x
|
|
|
x
|
|
Certificate Type
|
x
|
|
|
|
|
|
|
|
x
|
|
Certificate Identifier
|
x
|
|
|
|
|
|
|
|
x
|
|
Certificate Issuer
|
x
|
|
|
|
|
|
|
|
x
|
|
Certificate Length
|
x
|
|
|
|
|
|
|
|
x
|
|
Certificate Subject
|
x
|
|
|
|
|
|
|
|
x
|
|
Digital Signature Algorithm
|
x
|
|
|
|
|
|
|
|
x
|
|
Digest
|
x
|
x
|
x
|
x
|
x
|
|
x
|
|
x
|
|
Operation Policy Name
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
|
Cryptographic Usage Mask
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
|
x
|
|
Lease Time
|
x
|
x
|
x
|
x
|
x
|
|
x
|
x
|
x
|
|
Usage Limits
|
|
x
|
x
|
x
|
x
|
x
|
|
|
|
|
State
|
x
|
x
|
x
|
x
|
x
|
|
x
|
|
x
|
|
Initial Date
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
|
Activation Date
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
|
x
|
|
Process Start Date
|
|
x
|
|
|
x
|
x
|
|
|
|
|
Protect Stop Date
|
|
x
|
|
|
x
|
x
|
|
|
|
|
Deactivation Date
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
|
Destroy Date
|
x
|
x
|
x
|
x
|
x
|
|
x
|
x
|
x
|
|
Compromise Occurrence Date
|
x
|
x
|
x
|
x
|
x
|
|
x
|
x
|
x
|
|
Compromise Date
|
x
|
x
|
x
|
x
|
x
|
|
x
|
x
|
x
|
|
Revocation Reason
|
x
|
x
|
x
|
x
|
x
|
|
x
|
x
|
x
|
|
Archive Date
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
|
Object Group
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
|
Fresh
|
x
|
x
|
x
|
x
|
x
|
|
|
|
x
|
|
Link
|
x
|
x
|
x
|
x
|
x
|
|
x
|
|
x
|
|
Application Specific Information
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
|
Contact Information
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
|
Last Change Date
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
|
Custom Attribute
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
|
Alternative Name
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
|
Key Value Present
|
|
x
|
|
x
|
x
|
|
x
|
|
|
|
Key Value Location
|
|
x
|
|
x
|
x
|
|
x
|
|
|
|
Original Creation Date
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
x
|
Table 367: Attribute Cross-reference
This table is not normative.
|
Object
|
Defined
|
Type
|
Notes
|
|
Activation Date
|
3.24
|
Date-Time
|
|
|
Application Data
|
3.36
|
Text String
|
|
|
Application Namespace
|
3.36
|
Text String
|
|
|
Application Specific
Information
|
3.36
|
Structure
|
|
|
Archive Date
|
3.32
|
Date-Time
|
|
|
Asynchronous
Correlation Value
|
6.8
|
Byte String
|
|
|
Asynchronous Indicator
|
6.7
|
Boolean
|
|
|
Attribute
|
2.1.1
|
Structure
|
|
|
Attribute Index
|
2.1.1
|
Integer
|
|
|
Attribute Name
|
2.1.1
|
Text String
|
|
|
Attribute Value
|
2.1.1
|
*
|
type varies
|
|
Authentication
|
6.6
|
Structure
|
|
|
Batch Count
|
6.14
|
Integer
|
|
|
Batch Error
Continuation Option
|
6.13, 9.1.3.2.30
|
Enumeration
|
|
|
Batch Item
|
6.15
|
Structure
|
|
|
Batch Order Option
|
6.12
|
Boolean
|
|
|
Block Cipher Mode
|
3.6, 9.1.3.2.14
|
Enumeration
|
|
|
Cancellation Result
|
4.27, 9.1.3.2.25
|
Enumeration
|
|
|
Certificate
|
2.2.1
|
Structure
|
|
|
Certificate Identifier
|
3.13
|
Structure
|
deprecated as of version
1.1
|
|
Certificate Issuer
|
3.13
|
Structure
|
deprecated as of
version 1.1
|
|
Certificate Issuer
Alternative Name
|
3.15
|
Text String
|
deprecated as of
version 1.1
|
|
Certificate Issuer
Distinguished Name
|
3.15
|
Text String
|
deprecated as of
version 1.1
|
|
Certificate Length
|
3.9
|
Integer
|
|
|
Certificate Request
|
4.7, 4.8
|
Byte String
|
|
|
Certificate Request
Type
|
4.7, 4.8, 9.1.3.2.22
|
Enumeration
|
|
|
Certificate Serial
Number
|
3.9
|
Byte String
|
|
|
Certificate Subject
|
3.14
|
Structure
|
deprecated as of
version 1.1
|
|
Certificate Subject
Alternative Name
|
3.14
|
Text String
|
deprecated as of
version 1.1
|
|
Certificate Subject
Distinguished Name
|
3.14
|
Text String
|
deprecated as of
version 1.1
|
|
Certificate Type
|
2.2.1, 3.8 , 9.1.3.2.6
|
Enumeration
|
|
|
Certificate Value
|
2.2.1
|
Byte String
|
|
|
Common
Template-Attribute
|
2.1.8
|
Structure
|
|
|
Compromise Occurrence
Date
|
3.29
|
Date-Time
|
|
|
Compromise Date
|
3.30
|
Date-Time
|
|
|
Contact Information
|
3.37
|
Text String
|
|
|
Credential
|
2.1.2
|
Structure
|
|
|
Credential Type
|
2.1.2, 9.1.3.2.1
|
Enumeration
|
|
|
Credential Value
|
2.1.2
|
*
|
type varies
|
|
Criticality Indicator
|
6.16
|
Boolean
|
|
|
CRT Coefficient
|
2.1.7
|
Big Integer
|
|
|
Cryptographic Algorithm
|
3.4, 9.1.3.2.13
|
Enumeration
|
|
|
Cryptographic Length
|
3.5
|
Integer
|
|
|
Cryptographic
Parameters
|
3.6
|
Structure
|
|
|
Cryptographic Usage
Mask
|
3.19, 9.1.3.3.1
|
Integer
|
Bit mask
|
|
Custom Attribute
|
3.39
|
*
|
type varies
|
|
D
|
2.1.7
|
Big Integer
|
|
|
Deactivation Date
|
3.27
|
Date-Time
|
|
|
Derivation Data
|
4.6
|
Byte String
|
|
|
Derivation Method
|
4.6, 9.1.3.2.21
|
Enumeration
|
|
|
Derivation Parameters
|
4.6
|
Structure
|
|
|
Destroy Date
|
3.28
|
Date-Time
|
|
|
Device Identifier
|
2.1.2
|
Text String
|
|
|
Device Serial Number
|
2.1.2
|
Text String
|
|
|
Digest
|
3.17
|
Structure
|
|
|
Digest Value
|
3.17
|
Byte String
|
|
|
Digital Signature
Algorithm
|
3.16
|
Enumeration
|
|
|
Encoding Option
|
2.1.5, 2.1.6, 9.1.3.2.32
|
Enumeration
|
|
|
Encryption Key
Information
|
2.1.5
|
Structure
|
|
|
Extension Information
|
2.1.9
|
Structure
|
|
|
Extension Name
|
2.1.9
|
Text String
|
|
|
Extension Tag
|
2.1.9
|
Integer
|
|
|
Extension Type
|
2.1.9
|
Integer
|
|
|
Extensions
|
9.1.3
|
|
|
|
Fresh
|
3.34
|
Boolean
|
|
|
G
|
2.1.7
|
Big Integer
|
|
|
Hashing Algorithm
|
3.6, 3.17, 9.1.3.2.16
|
Enumeration
|
|
|
Initial Date
|
3.23
|
Date-Time
|
|
|
Initialization Vector
|
4.6
|
Byte String
|
|
|
Issuer
|
3.13
|
Text String
|
deprecated as of
version 1.1
|
|
Issuer Alternative Name
|
3.12
|
Byte String
|
|
|
Issuer Distinguished
Name
|
3.12
|
Byte String
|
|
|
Iteration Count
|
4.6
|
Integer
|
|
|
IV/Counter/Nonce
|
2.1.5
|
Byte String
|
|
|
J
|
2.1.7
|
Big Integer
|
|
|
Key
|
2.1.7
|
Byte String
|
|
|
Key Block
|
2.1.3
|
Structure
|
|
|
Key Compression Type
|
9.1.3.2.2
|
Enumeration
|
|
|
Key Format Type
|
2.1.4, 9.1.3.2.3
|
Enumeration
|
|
|
Key Material
|
2.1.4, 2.1.7
|
Byte String / Structure
|
|
|
Key Part Identifier
|
2.2.5
|
Integer
|
|
|
Key Role Type
|
3.6, 9.1.3.2.17
|
Enumeration
|
|
|
Key Value
|
2.1.4
|
Byte String / Structure
|
|
|
Key Wrapping Data
|
2.1.5
|
Structure
|
|
|
Key Wrapping Specification
|
2.1.6
|
Structure
|
|
|
Last Change Date
|
3.38
|
Date-Time
|
|
|
Lease Time
|
3.20
|
Interval
|
|
|
Link
|
3.35
|
Structure
|
|
|
Link Type
|
3.35, 9.1.3.2.20
|
Enumeration
|
|
|
Linked Object
Identifier
|
3.35
|
Text String
|
|
|
MAC/Signature
|
2.1.5
|
Byte String
|
|
|
MAC/Signature Key
Information
|
2.1.5
|
Text String
|
|
|
Machine Identifier
|
2.1.2
|
Text String
|
|
|
Maximum Items
|
4.9
|
Integer
|
|
|
Maximum Response Size
|
6.3
|
Integer
|
|
|
Media Identifier
|
2.1.2
|
Text String
|
|
|
Message Extension
|
6.16
|
Structure
|
|
|
Modulus
|
2.1.7
|
Big Integer
|
|
|
Name
|
3.2
|
Structure
|
|
|
Name Type
|
3.2, 9.1.3.2.11
|
Enumeration
|
|
|
Name Value
|
3.2
|
Text String
|
|
|
Network Identifier
|
2.1.2
|
Text String
|
|
|
Object Group
|
3.33
|
Text String
|
|
|
Object Group Member
|
4.9
|
Enumeration
|
|
|
Object Type
|
3.3, 9.1.3.2.12
|
Enumeration
|
|
|
Offset
|
4.4, 4.8
|
Interval
|
|
|
Opaque Data Type
|
2.2.8, 9.1.3.2.10
|
Enumeration
|
|
|
Opaque Data Value
|
2.2.8
|
Byte String
|
|
|
Opaque Object
|
2.2.8
|
Structure
|
|
|
Operation
|
6.2, 9.1.3.2.27
|
Enumeration
|
|
|
Operation Policy Name
|
3.18
|
Text String
|
|
|
P
|
2.1.7
|
Big Integer
|
|
|
Password
|
2.1.2
|
Text String
|
|
|
Padding Method
|
3.6, 9.1.3.2.15
|
Enumeration
|
|
|
Prime Exponent P
|
2.1.7
|
Big Integer
|
|
|
Prime Exponent Q
|
2.1.7
|
Big Integer
|
|
|
Prime Field Size
|
2.2.5
|
Big Integer
|
|
|
Private Exponent
|
2.1.7
|
Big Integer
|
|
|
Private Key
|
2.2.4
|
Structure
|
|
|
Private Key
Template-Attribute
|
2.1.8
|
Structure
|
|
|
Private Key Unique
Identifier
|
4.2
|
Text String
|
|
|
Process Start Date
|
3.25
|
Date-Time
|
|
|
Protect Stop Date
|
3.26
|
Date-Time
|
|
|
Protocol Version
|
6.1
|
Structure
|
|
|
Protocol Version Major
|
6.1
|
Integer
|
|
|
Protocol Version Minor
|
6.1
|
Integer
|
|
|
Public Exponent
|
2.1.7
|
Big Integer
|
|
|
Public Key
|
2.2.3
|
Structure
|
|
|
Public Key
Template-Attribute
|
2.1.8
|
Structure
|
|
|
Public Key Unique
Identifier
|
4.2
|
Text String
|
|
|
Put Function
|
5.2, 9.1.3.2.26
|
Enumeration
|
|
|
Q
|
2.1.7
|
Big Integer
|
|
|
Q String
|
2.1.7
|
Byte String
|
|
|
Qlength
|
3.7
|
Integer
|
|
|
Query Function
|
4.25, 9.1.3.2.24
|
Enumeration
|
|
|
Recommended Curve
|
2.1.7, 3.7, 9.1.3.2.5
|
Enumeration
|
|
|
Replaced Unique Identifier
|
5.2
|
Text String
|
|
|
Request Header
|
7.2
|
Structure
|
|
|
Request Message
|
7.1
|
Structure
|
|
|
Request Payload
|
4, 5, 7.2
|
Structure
|
|
|
Response Header
|
7.2
|
Structure
|
|
|
Response Message
|
7.1
|
Structure
|
|
|
Response Payload
|
4, 7.2
|
Structure
|
|
|
Result Message
|
6.11
|
Text String
|
|
|
Result Reason
|
6.10, 9.1.3.2.29
|
Enumeration
|
|
|
Result Status
|
6.9, 9.1.3.2.28
|
Enumeration
|
|
|
Revocation Message
|
3.31
|
Text String
|
|
|
Revocation Reason
|
3.31
|
Structure
|
|
|
Revocation Reason Code
|
3.31, 9.1.3.2.19
|
Enumeration
|
|
|
Salt
|
4.6
|
Byte String
|
|
|
Secret Data
|
2.2.7
|
Structure
|
|
|
Secret Data Type
|
2.2.7, 9.1.3.2.9
|
Enumeration
|
|
|
Serial Number
|
3.13
|
Text String
|
deprecated as of
version 1.1
|
|
Server Information
|
4.25
|
Structure
|
contents
vendor-specific
|
|
Split Key
|
2.2.5
|
Structure
|
|
|
Split Key Method
|
2.2.5, 9.1.3.2.8
|
Enumeration
|
|
|
Split Key Parts
|
2.2.5
|
Integer
|
|
|
Split Key Threshold
|
2.2.5
|
Integer
|
|
|
State
|
3.22, 9.1.3.2.18
|
Enumeration
|
|
|
Storage Status Mask
|
4.9, 9.1.3.3.2
|
Integer
|
Bit mask
|
|
Subject Alternative
Name
|
3.11
|
Byte String
|
|
|
Subject Distinguished
Name
|
3.11
|
Byte String
|
|
|
Symmetric Key
|
2.2.2
|
Structure
|
|
|
Template
|
2.2.6
|
Structure
|
|
|
Template-Attribute
|
2.1.8
|
Structure
|
|
|
Time Stamp
|
6.5
|
Date-Time
|
|
|
Transparent*
|
2.1.7
|
Structure
|
|
|
Unique Identifier
|
3.1
|
Text String
|
|
|
Unique Batch Item ID
|
6.4
|
Byte String
|
|
|
Username
|
2.1.2
|
Text String
|
|
|
Usage Limits
|
3.21
|
Structure
|
|
|
Usage Limits Count
|
3.21
|
Long Integer
|
|
|
Usage Limits Total
|
3.21
|
Long Integer
|
|
|
Usage Limits Unit
|
3.21
|
Enumeration
|
|
|
Validity Date
|
4.24
|
Date-Time
|
|
|
Validity Indicator
|
4.24, 9.1.3.2.23
|
Enumeration
|
|
|
Vendor Extension
|
6.16
|
Structure
|
contents
vendor-specific
|
|
Vendor Identification
|
4.25, 6.16
|
Text String
|
|
|
Wrapping Method
|
2.1.5, 9.1.3.2.4
|
Enumeration
|
|
|
X
|
2.1.7
|
Big Integer
|
|
|
X.509 Certificate
Identifier
|
3.9
|
Structure
|
|
|
X.509 Certificate
Issuer
|
3.12
|
Structure
|
|
|
X.509 Certificate
Subject
|
3.11
|
Structure
|
|
|
Y
|
2.1.7
|
Big Integer
|
|
Table 368: Tag Cross-reference
The following table indicates the types of Managed
Object(s) that each Operation accepts as input or provides as output. This
table is not normative.
|
Operation
|
Managed
Objects
|
|
Certificate
|
Symmetric
Key
|
Public
Key
|
Private
Key
|
Split
Key
|
Template
|
Secret
Data
|
Opaque
Object
|
PGP
Key
|
|
Create
|
N/A
|
Y
|
N/A
|
N/A
|
N/A
|
Y
|
N/A
|
N/A
|
N/A
|
|
Create Key
Pair
|
N/A
|
N/A
|
Y
|
Y
|
N/A
|
Y
|
N/A
|
N/A
|
N/A
|
|
Register
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
|
Re-key
|
N/A
|
Y
|
N/A
|
N/A
|
N/A
|
Y
|
N/A
|
N/A
|
N/A
|
|
Re-key Key
Pair
|
N/A
|
N/A
|
Y
|
Y
|
N/A
|
Y
|
N/A
|
N/A
|
N/A
|
|
Derive Key
|
N/A
|
Y
|
N/A
|
N/A
|
N/A
|
Y
|
Y
|
N/A
|
N/A
|
|
Certify
|
Y
|
N/A
|
Y
|
N/A
|
N/A
|
Y
|
N/A
|
N/A
|
Y
|
|
Re-certify
|
Y
|
N/A
|
N/A
|
N/A
|
N/A
|
Y
|
N/A
|
N/A
|
Y
|
|
Locate
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
|
Check
|
Y
|
Y
|
Y
|
Y
|
Y
|
N/A
|
Y
|
Y
|
Y
|
|
Get
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
|
Get Attributes
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
|
Get Attribute
List
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
|
Add Attribute
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
|
Modify
Attribute
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
|
Delete
Attribute
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
|
Obtain Lease
|
Y
|
Y
|
Y
|
Y
|
Y
|
N/A
|
Y
|
N/A
|
Y
|
|
Get Usage
Allocation
|
N/A
|
Y
|
Y
|
Y
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
|
Activate
|
Y
|
Y
|
Y
|
Y
|
Y
|
N/A
|
Y
|
N/A
|
Y
|
|
Revoke
|
Y
|
Y
|
N/A
|
Y
|
Y
|
N/A
|
Y
|
Y
|
Y
|
|
Destroy
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
|
Archive
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
|
Recover
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
|
Validate
|
Y
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
Y
|
|
Query
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
|
Cancel
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
|
Poll
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
|
Notify
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
|
Put
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
Y
|
|
Discover Versions
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
N/A
|
Table 369: Operation and Object Cross-reference
The following abbreviations and acronyms are used in this
document:
|
Item
|
Description
|
|
3DES
|
Triple Data Encryption Standard specified in
ANSI X9.52
|
|
AES
|
Advanced Encryption Standard specified in [FIPS197]FIPS 197
|
|
ASN.1
|
Abstract Syntax Notation One specified in ITU-T
X.680
|
|
BDK
|
Base Derivation Key specified in ANSI X9 TR-31
|
|
CA
|
Certification Authority
|
|
CBC
|
Cipher Block Chaining
|
|
CCM
|
Counter with CBC-MAC specified in [SP800-38C]
|
|
CFB
|
Cipher Feedback specified in [SP800-38A]
|
|
CMAC
|
Cipher-based MAC specified in [SP800-38B]
|
|
CMC
|
Certificate Management Messages over CMS
specified in [RFC5272]
|
|
CMP
|
Certificate Management Protocol specified in [RFC4210]
|
|
CPU
|
Central Processing Unit
|
|
CRL
|
Certificate Revocation List specified in [RFC5280]
|
|
CRMF
|
Certificate Request Message Format specified in [RFC4211]
|
|
CRT
|
Chinese Remainder Theorem
|
|
CTR
|
Counter specified in [SP800-38A]
|
|
CVK
|
Card Verification Key specified in ANSI X9 TR-31
|
|
DEK
|
Data Encryption Key
|
|
DER
|
Distinguished Encoding Rules specified in ITU-T
X.690
|
|
DES
|
Data Encryption Standard specified in FIPS 46-3
|
|
DH
|
Diffie-Hellman specified in ANSI X9.42
|
|
DNS
|
Domain Name Server
|
|
DSA
|
Digital Signature Algorithm specified in FIPS
186-3
|
|
DSKPP
|
Dynamic Symmetric Key Provisioning Protocol
|
|
ECB
|
Electronic Code Book
|
|
ECDH
|
Elliptic Curve Diffie-Hellman specified in [X9.63][SP800-56A]
|
|
ECDSA
|
Elliptic Curve Digital Signature Algorithm
specified in [X9.62]
|
|
ECMQV
|
Elliptic Curve Menezes Qu Vanstone specified in [X9.63][SP800-56A]
|
|
FFC
|
Finite Field Cryptography
|
|
FIPS
|
Federal Information Processing Standard
|
|
GCM
|
Galois/Counter Mode specified in [SP800-38D]
|
|
GF
|
Galois field (or finite field)
|
|
HMAC
|
Keyed-Hash Message Authentication Code specified
in [FIPS198-1][RFC2104]
|
|
HTTP
|
Hyper Text Transfer Protocol
|
|
HTTP(S)
|
Hyper Text Transfer Protocol (Secure socket)
|
|
IEEE
|
Institute of Electrical and Electronics
Engineers
|
|
IETF
|
Internet Engineering Task Force
|
|
IP
|
Internet Protocol
|
|
IPsec
|
Internet Protocol Security
|
|
IV
|
Initialization Vector
|
|
KEK
|
Key Encryption Key
|
|
KMIP
|
Key Management Interoperability Protocol
|
|
MAC
|
Message Authentication Code
|
|
MKAC
|
EMV/chip card Master Key: Application
Cryptograms specified in ANSI X9 TR-31
|
|
MKCP
|
EMV/chip card Master Key: Card Personalization
specified in ANSI X9 TR-31
|
|
MKDAC
|
EMV/chip card Master Key: Data Authentication
Code specified in ANSI X9 TR-31
|
|
MKDN
|
EMV/chip card Master Key: Dynamic Numbers
specified in ANSI X9 TR-31
|
|
MKOTH
|
EMV/chip card Master Key: Other specified in
ANSI X9 TR-31
|
|
MKSMC
|
EMV/chip card Master Key: Secure Messaging for
Confidentiality specified in X9 TR-31
|
|
MKSMI
|
EMV/chip card Master Key: Secure Messaging for
Integrity specified in ANSI X9 TR-31
|
|
MD2
|
Message Digest 2 Algorithm specified in [RFC1319]
|
|
MD4
|
Message Digest 4 Algorithm specified in [RFC1320]
|
|
MD5
|
Message Digest 5 Algorithm specified in [RFC1321]
|
|
NIST
|
National Institute of Standards and Technology
|
|
OAEP
|
Optimal Asymmetric Encryption Padding specified
in [PKCS#1]
|
|
OFB
|
Output Feedback specified in [SP800-38A]
|
|
PBKDF2
|
Password-Based Key Derivation Function 2 specified
in [RFC2898]
|
|
PCBC
|
Propagating Cipher Block Chaining
|
|
PEM
|
Privacy Enhanced Mail specified in [RFC1421]
|
|
PGP
|
OpenPGP specified in [RFC4880]
|
|
PKCS
|
Public-Key Cryptography Standards
|
|
PKCS#1
|
RSA Cryptography Specification Version 2.1
specified in [RFC3447]
|
|
PKCS#5
|
Password-Based Cryptography Specification
Version 2 specified in [RFC2898]
|
|
PKCS#8
|
Private-Key Information Syntax Specification
Version 1.2 specified in [RFC5208] [RFC5958]
|
|
PKCS#10
|
Certification Request Syntax Specification
Version 1.7 specified in [RFC2986]
|
|
PKCS#11
|
Cryptographic Token Interface Standard
|
|
PKCS#12
|
Personal Information Exchange Syntax
|
|
POSIX
|
Portable Operating System Interface
|
|
RFC
|
Request for Comments documents of IETF
|
|
RSA
|
Rivest, Shamir, Adelman (an algorithm)
|
|
RNG
|
Random Number Generator
|
|
SCEP
|
Simple Certificate Enrollment Protocol
|
|
SCVP
|
Server-based Certificate Validation Protocol
|
|
SHA
|
Secure Hash Algorithm specified in FIPS 180-2
|
|
SP
|
Special Publication
|
|
SSL/TLS
|
Secure Sockets Layer/Transport Layer Security
|
|
S/MIME
|
Secure/Multipurpose Internet Mail Extensions
|
|
TDEA
|
see 3DES
|
|
TCP
|
Transport Control Protocol
|
|
TTLV
|
Tag, Type, Length, Value
|
|
URI
|
Uniform Resource Identifier
|
|
UTC
|
Coordinated Universal Time
|
|
UTF-8
|
Universal Transformation Format 8-bit specified
in [RFC3629]
|
|
XKMS
|
XML Key Management Specification
|
|
XML
|
Extensible Markup Language
|
|
XTS
|
XEX Tweakable Block Cipher with Ciphertext
Stealing specified in [SP800-38E]
|
|
X.509
|
Public Key Certificate specified in [RFC5280]
|
|
ZPK
|
PIN Block Encryption Key specified in ANSI X9
TR-31
|
Figure 1: Cryptographic Object States
and Transitions
63
Table 1: Terminology. 14
Table 2: Attribute Object Structure. 19
Table 3: Credential Object Structure. 20
Table 4: Credential Value Structure
for the Username and Password Credential 20
Table 5: Credential Value Structure
for the Device Credential 20
Table 6: Credential Value Structure
for the Attestation Credential 21
Table 7: Key Block Object Structure. 22
Table 8: Key Value Object Structure. 23
Table 9: Key Wrapping Data Object
Structure. 24
Table 10: Encryption Key Information
Object Structure. 24
Table 11: MAC/Signature Key
Information Object Structure. 25
Table 12: Key Wrapping Specification
Object Structure. 26
Table 13: Parameter mapping. 27
Table 14: Key Material Object
Structure for Transparent Symmetric Keys. 27
Table 15: Key Material Object
Structure for Transparent DSA Private Keys. 28
Table 16: Key Material Object
Structure for Transparent DSA Public Keys. 28
Table 17: Key Material Object
Structure for Transparent RSA Private Keys. 28
Table 18: Key Material Object
Structure for Transparent RSA Public Keys. 29
Table 19: Key Material Object
Structure for Transparent DH Private Keys. 29
Table 20: Key Material Object
Structure for Transparent DH Public Keys. 29
Table 21: Key Material Object
Structure for Transparent ECDSA Private Keys. 30
Table 22: Key Material Object
Structure for Transparent ECDSA Public Keys. 30
Table 23: Key Material Object
Structure for Transparent ECDH Private Keys. 30
Table 24: Key Material Object
Structure for Transparent ECDH Public Keys. 31
Table 25: Key Material Object
Structure for Transparent ECMQV Private Keys. 31
Table 26: Key Material Object
Structure for Transparent ECMQV Public Keys. 31
Table 27: Key Material Object
Structure for Transparent EC Private Keys. 31
Table 28: Key Material Object
Structure for Transparent EC Public Keys. 32
Table 29: Template-Attribute Object
Structure. 32
Table 30: Extension Information
Structure. 32
Table 31: Data Structure. 33
Table 32: Data Length Structure. 33
Table 33: Signature Data Structure. 33
Table 34: MAC Data Structure. 33
Table 35: Nonce Structure. 33
Table 36: Correlation Value Structure. 34
Table 37: Init Indicator Structure. 34
Table 38: Final Indicator Structure. 34
Table 39: RNG Parameters Structure. 35
Table 40: Profile Information
Structure. 35
Table 41: Validation Information
Structure. 36
Table 42: Capability Information
Structure. 37
Table 43 Authenticated Encryption
Additional Data. 37
Table 44 Authenticated Encryption Tag. 37
Table 45: Certificate Object Structure. 38
Table 46: Symmetric Key Object
Structure. 38
Table 47: Public Key Object Structure. 38
Table 48: Private Key Object Structure. 38
Table 49: Split Key Object Structure. 39
Table 50: Template Object Structure. 40
Table 51: Secret Data Object Structure. 40
Table 52: Opaque Object Structure. 40
Table 53: PGP Key Object Structure. 41
Table 54: Attribute Rules. 43
Table 55: Unique Identifier Attribute. 43
Table 56: Unique Identifier Attribute
Rules. 44
Table 57: Name Attribute Structure. 44
Table 58: Name Attribute Rules. 44
Table 59: Object Type Attribute. 45
Table 60: Object Type Attribute Rules. 45
Table 61: Cryptographic Algorithm
Attribute. 45
Table 62: Cryptographic Algorithm
Attribute Rules. 45
Table 63: Cryptographic Length
Attribute. 46
Table 64: Cryptographic Length
Attribute Rules. 46
Table 65: Cryptographic Parameters
Attribute Structure. 47
Table 66: Cryptographic Parameters
Attribute Rules. 48
Table 67: Key Role Types. 48
Table 68: Cryptographic Domain
Parameters Attribute Structure. 49
Table 69: Cryptographic Domain
Parameters Attribute Rules. 49
Table 70: Certificate Type Attribute. 49
Table 71: Certificate Type Attribute
Rules. 50
Table 72: Certificate Length Attribute. 50
Table 73: Certificate Length Attribute
Rules. 50
Table 74: X.509
Certificate Identifier Attribute Structure. 50
Table 75: X.509 Certificate Identifier
Attribute Rules. 51
Table 76: X.509 Certificate Subject
Attribute Structure. 51
Table 77: X.509 Certificate Subject
Attribute Rules. 51
Table 78: X.509 Certificate Issuer
Attribute Structure. 52
Table 79: X.509 Certificate Issuer
Attribute Rules. 52
Table 80: Certificate
Identifier Attribute Structure. 52
Table 81: Certificate Identifier
Attribute Rules. 53
Table 82: Certificate Subject
Attribute Structure. 53
Table 83: Certificate Subject
Attribute Rules. 53
Table 84: Certificate Issuer Attribute
Structure. 54
Table 85: Certificate Issuer Attribute
Rules. 54
Table 86: Digital
Signature Algorithm Attribute. 54
Table 87: Digital Signature Algorithm
Attribute Rules. 55
Table 88: Digest Attribute Structure. 55
Table 89: Digest Attribute Rules. 56
Table 90: Operation Policy Name
Attribute. 56
Table 91: Operation Policy Name
Attribute Rules. 57
Table 92: Default Operation Policy for
Secret Objects. 58
Table 93: Default Operation Policy for
Certificates and Public Key Objects. 59
Table 94: Default Operation Policy for
Private Template Objects. 59
Table 95: Default Operation Policy for
Public Template Objects. 60
Table 96: X.509 Key Usage to
Cryptographic Usage Mask Mapping. 61
Table 97: Cryptographic
Usage Mask Attribute. 61
Table 98: Cryptographic Usage Mask
Attribute Rules. 61
Table 99: Lease Time Attribute. 62
Table 100: Lease Time Attribute Rules. 62
Table 101: Usage Limits
Attribute Structure. 62
Table 102: Usage Limits Attribute
Rules. 63
Table 103: State Attribute. 64
Table 104: State Attribute Rules. 65
Table 105: Initial Date Attribute. 65
Table 106: Initial Date Attribute
Rules. 65
Table 107: Activation Date Attribute. 66
Table 108: Activation Date Attribute
Rules. 66
Table 109: Process Start Date
Attribute. 66
Table 110: Process Start Date
Attribute Rules. 67
Table 111: Protect Stop Date Attribute. 67
Table 112: Protect Stop Date Attribute
Rules. 67
Table 113: Deactivation Date Attribute. 68
Table 114: Deactivation Date Attribute
Rules. 68
Table 115: Destroy Date Attribute. 68
Table 116: Destroy Date Attribute
Rules. 69
Table 117: Compromise
Occurrence Date Attribute. 69
Table 118: Compromise Occurrence Date
Attribute Rules. 69
Table 119: Compromise Date Attribute. 69
Table 120: Compromise Date Attribute
Rules. 70
Table 121: Revocation Reason Attribute
Structure. 70
Table 122: Revocation Reason Attribute
Rules. 70
Table 123: Archive Date Attribute. 70
Table 124: Archive Date Attribute
Rules. 71
Table 125: Object Group Attribute. 71
Table 126: Object Group Attribute
Rules. 71
Table 127: Fresh Attribute. 71
Table 128: Fresh Attribute Rules. 72
Table 129: Link Attribute Structure. 73
Table 130: Link Attribute Structure
Rules. 73
Table 131: Application Specific
Information Attribute. 73
Table 132: Application Specific
Information Attribute Rules. 74
Table 133: Contact Information
Attribute. 74
Table 134: Contact Information
Attribute Rules. 74
Table 135: Last Change Date Attribute. 74
Table 136: Last Change Date Attribute
Rules. 75
Table 137 Custom Attribute. 75
Table 138: Custom Attribute Rules. 75
Table 139: Alternative Name Attribute
Structure. 76
Table 140: Alternative Name Attribute
Rules. 76
Table 141: Key Value Present Attribute. 76
Table 142: Key Value Present Attribute
Rules. 77
Table 143: Key Value Location
Attribute. 77
Table 144: Key Value Location
Attribute Rules. 77
Table 145: Original Creation Date
Attribute. 78
Table 146: Original Creation Date
Attribute Rules. 78
Table 147: Random Number Generator
Attribute. 78
Table 148: Random Number Generator
Attribute Rules. 79
Table 149: PKCS#12 Friendly Name
Attribute. 79
Table 150: Friendly Name Attribute
Rules. 79
Table 151: Description Attribute. 80
Table 152: Description Attribute Rules. 80
Table 153: Comment Attribute. 80
Table 154: Comment Rules. 80
Table 155: Sensitive Attribute. 80
Table 156: Sensitive Attribute Rules. 81
Table 157: Always Sensitive Attribute. 81
Table 158: Always Sensitive Attribute
Rules. 81
Table 159: Extractable Attribute. 81
Table 160: Extractable Attribute Rules. 82
Table 161: Never Extractable Attribute. 82
Table 162: Never Extractable Attribute
Rules. 82
Table 163: Create Request Payload. 84
Table 164: Create Response Payload. 85
Table 165: Create Attribute
Requirements. 85
Table 166: Create Key Pair Request
Payload. 86
Table 167: Create Key Pair Response
Payload. 87
Table 168: Create Key Pair Attribute
Requirements. 88
Table 169: Register Request Payload. 89
Table 170: Register Response Payload. 89
Table 171: Register Attribute
Requirements. 90
Table 172: Computing New Dates from
Offset during Re-key. 91
Table 173: Re-key Attribute
Requirements. 91
Table 174: Re-key Request Payload. 92
Table 175: Re-key Response Payload. 92
Table 176: Computing New Dates from
Offset during Re-key Key Pair 93
Table 177: Re-key Key Pair Attribute
Requirements. 94
Table 178: Re-key Key Pair Request
Payload. 95
Table 179: Re-key Key Pair Response
Payload. 96
Table 180: Derive Key Request Payload. 97
Table 181: Derive Key Response Payload. 98
Table 182: Derivation Parameters
Structure (Except PBKDF2) 98
Table 183: PBKDF2 Derivation
Parameters Structure. 99
Table 184: Certify Request Payload. 100
Table 185: Certify Response Payload. 100
Table 186: Computing New Dates from
Offset during Re-certify. 101
Table 187: Re-certify Attribute
Requirements. 101
Table 188: Re-certify Request Payload. 102
Table 189: Re-certify Response Payload. 102
Table 190: Locate Request Payload. 104
Table 191: Locate Response Payload. 104
Table 192: Check Request Payload. 105
Table 193: Check Response Payload. 106
Table 194: Get Request Payload. 107
Table 195: Get Response Payload. 107
Table 196: Get Attributes Request
Payload. 107
Table 197: Get Attributes Response
Payload. 108
Table 198: Get Attribute List Request
Payload. 108
Table 199: Get Attribute List Response
Payload. 108
Table 200: Add Attribute Request
Payload. 108
Table 201: Add Attribute Response Payload. 109
Table 202: Modify Attribute Request
Payload. 109
Table 203: Modify Attribute Response
Payload. 109
Table 204: Delete Attribute Request
Payload. 110
Table 205: Delete Attribute Response
Payload. 110
Table 206: Obtain Lease Request
Payload. 110
Table 207: Obtain Lease Response
Payload. 111
Table 208: Get Usage Allocation
Request Payload. 111
Table 209: Get Usage Allocation
Response Payload. 111
Table 210: Activate Request Payload. 112
Table 211: Activate Response Payload. 112
Table 212: Revoke Request Payload. 112
Table 213: Revoke Response Payload. 113
Table 214: Destroy Request Payload. 113
Table 215: Destroy Response Payload. 113
Table 216: Archive Request Payload. 113
Table 217: Archive Response Payload. 114
Table 218: Recover Request Payload. 114
Table 219: Recover Response Payload. 114
Table 220: Validate Request Payload. 115
Table 221: Validate Response Payload. 115
Table 222: Query Request Payload. 116
Table 223: Query Response Payload. 117
Table 224: Discover Versions Request
Payload. 118
Table 225: Discover Versions Response
Payload. 118
Table 226: Cancel Request Payload. 118
Table 227: Cancel Response Payload. 118
Table 228: Poll Request Payload. 119
Table 229: Encrypt Request Payload. 120
Table 230: Encrypt Response Payload. 121
Table 231: Decrypt Request Payload. 122
Table 232: Decrypt Response Payload. 123
Table 233: Sign Request Payload. 124
Table 234: Sign Response Payload. 125
Table 235: Signature Verify Request
Payload. 126
Table 236: Signature Verify Response
Payload. 127
Table 237: MAC Request Payload. 128
Table 238: MAC Response Payload. 128
Table 239: MAC Verify Request Payload. 129
Table 240: MAC Verify Response Payload. 130
Table 241: RNG Retrieve Request
Payload. 130
Table 242: RNG Retrieve Response
Payload. 130
Table 243: RNG Seed Request Payload. 131
Table 244: RNG Seed Response Payload. 131
Table 245: Hash Request Payload. 131
Table 246: Hash Response Payload. 132
Table 247: Create Split Key Request
Payload. 132
Table 248: Create Split Key Response
Payload. 133
Table 249: Join Split Key Request
Payload. 133
Table 250: Join Split Key Response
Payload. 133
Table 251: Export Request Payload. 134
Table 252: Export Response Payload. 134
Table 253: Export Request Payload. 135
Table 254: Export Response Payload. 135
Table 255: Notify Message Payload. 136
Table 256: Put Message Payload. 137
Table 257: Query Request Payload. 138
Table 258: Query Response Payload. 139
Table 259: Discover Versions Request
Payload. 140
Table 260: Discover Versions Response
Payload. 140
Table 261: Protocol Version Structure
in Message Header 141
Table 262: Operation in Batch Item.. 141
Table 263: Maximum Response Size in
Message Request Header 141
Table 264: Unique Batch Item ID in
Batch Item.. 142
Table 265: Time Stamp in Message
Header 142
Table 266: Authentication Structure in
Message Header 142
Table 267: Asynchronous Indicator in
Message Request Header 142
Table 268: Asynchronous Correlation
Value in Response Batch Item.. 143
Table 269: Result Status in Response
Batch Item.. 143
Table 270: Result Reason in Response
Batch Item.. 144
Table 271: Result Message in Response
Batch Item.. 144
Table 272: Batch Order Option in
Message Request Header 144
Table 273: Batch Error Continuation
Option in Message Request Header 145
Table 274: Batch Count in Message
Header 145
Table 275: Batch Item in Message. 145
Table 276: Message Extension Structure
in Batch Item.. 145
Table 277: Attestation Capable
Indicator in Message Request Header 146
Table 278: Client Correlation Value in
Message Request Header 146
Table 279: Server Correlation Value in
Message Request Header 146
Table 280: Request Message Structure. 147
Table 281: Response Message Structure. 147
Table 282: Request Header Structure. 148
Table 283: Request Batch Item
Structure. 148
Table 284: Response Header Structure. 149
Table 285: Response Batch Item
Structure. 149
Table 286: Allowed Item Type Values. 151
Table 287: Allowed Item Length Values. 152
Table 288: Tag Values. 162
Table 289: Credential Type Enumeration. 163
Table 290: Key Compression Type
Enumeration. 163
Table 291: Key Format Type Enumeration. 164
Table 292: Wrapping Method Enumeration. 164
Table 293: Recommended Curve
Enumeration for ECDSA, ECDH, and ECMQV. 166
Table 294: Certificate Type
Enumeration. 167
Table 295: Digital Signature Algorithm
Enumeration. 167
Table 296: Split Key Method
Enumeration. 168
Table 297: Secret Data Type
Enumeration. 168
Table 298: Opaque Data Type
Enumeration. 168
Table 299: Name Type Enumeration. 168
Table 300: Object Type Enumeration. 169
Table 301: Cryptographic Algorithm
Enumeration. 171
Table 302: Block Cipher Mode
Enumeration. 171
Table 303: Padding Method Enumeration. 172
Table 304: Hashing Algorithm
Enumeration. 172
Table 305: Key Role Type Enumeration. 173
Table 306: State Enumeration. 174
Table 307: Revocation Reason Code
Enumeration. 174
Table 308: Link Type Enumeration. 175
Table 309: Derivation Method
Enumeration. 175
Table 310: Certificate Request Type
Enumeration. 175
Table 311: Validity Indicator
Enumeration. 176
Table 312: Query Function Enumeration. 176
Table 313: Cancellation Result
Enumeration. 176
Table 314: Put Function Enumeration. 177
Table 315: Operation Enumeration. 179
Table 316: Result Status Enumeration. 179
Table 317: Result Reason Enumeration. 180
Table 318: Batch Error Continuation
Option Enumeration. 181
Table 319: Usage Limits
Unit Enumeration. 181
Table 320: Encoding Option Enumeration. 181
Table 321: Object Group Member
Enumeration. 181
Table 322: Alternative Name Type
Enumeration. 182
Table 323: Key Value Location Type
Enumeration. 182
Table 324: Attestation Type
Enumeration. 182
Table 325: Cryptographic Usage Mask. 192
Table 326: Storage Status Mask. 192
Table 327: General Errors. 196
Table 328: Create Errors. 196
Table 329: Create Key Pair Errors. 197
Table 330: Register Errors. 198
Table 331: Re-key Errors. 199
Table 332: Re-key Key Pair Errors. 200
Table 333: Derive Key Errors- 201
Table 334: Certify Errors. 202
Table 335: Re-certify Errors. 202
Table 336: Locate Errors. 203
Table 337: Check Errors. 203
Table 338: Get Errors. 204
Table 339: Get Attributes Errors. 205
Table 340: Get Attribute List Errors. 205
Table 341: Add Attribute Errors. 205
Table 342: Modify Attribute Errors. 206
Table 343: Delete Attribute Errors. 206
Table 344: Obtain Lease Errors. 206
Table 345: Get Usage Allocation Errors. 207
Table 346: Activate Errors. 207
Table 347: Revoke Errors. 207
Table 348: Destroy Errors. 208
Table 349: Archive Errors. 208
Table 350: Recover Errors. 208
Table 351: Validate Errors. 208
Table 352: Poll Errors. 209
Table 353: Encrypt Errors. 209
Table 354: Decrypt Errors. 209
Table 355: Sign Errors. 210
Table 356: Signature Verify Errors. 210
Table 357: MAC Errors. 211
Table 358: MAC Verify Errors. 211
Table 359: RNG Retrieve Errors. 211
Table 360: RNG Seed Errors. 211
Table 361: HASH Errors. 212
Table 362: Create Split Key Errors. 212
Table 363: Join Split Key Errors. 213
Table 364: Export Errors. 214
Table 365: Import Errors. 215
Table 366: Batch Items Errors. 216
Table 367: Attribute Cross-reference. 220
Table 368: Tag Cross-reference. 226
Table 369: Operation and Object
Cross-reference. 228
