The Solution Deployment Descriptor (SDD)
specification defines a standard, in the form of a schema for XML documents, called
Solution Deployment Descriptors, or SDDs. SDDs define metadata
that describes the packaging and deployment characteristics of resources that
are relevant for their lifecycle management, including creation, configuration
and maintenance.
A.1 Terminology
The following terms are used in this specification in a
specialized sense that might differ from definitions elsewhere.
Artifact
Zero or more files and/or metadata
used to perform a deployment lifecycle operation
on a resource.
Deployment lifecycle
The stages marking maturation of a solution:
develop, package, integrate, manufacture, install, configure, evaluate, deploy
into production, upgrade and/or update, uninstall.
Host Resource
A resource that provides the execution environment for
another resource.
Package
A set of artifacts used to perform deployment lifecycle
operations on a group of related resources that make up a solution.
Resource
A particular element of a computing environment,
such as a computer system, an operating system, a Web server, a software
application, or a complex solution.
Solution
One or more interrelated resources on which deployment
lifecycle operations can be performed.
Target Resource
A resource that processes artifacts to perform deployment
lifecycle operations on another resource. The host resource often
serves as the target resource.
Topology
The physical or logical layout of a solution’s resources.
Update (n.)
A package that replaces a limited set of the resources
in a solution instance. An update does not require migration.
Upgrade (n.)
A package that replaces all, or a significant
portion of, the resources used in a solution. An upgrade might or
might not require migration.
The purpose of this document is to provide the normative
specification of the SDD, including concepts, structure, syntax, semantics and
usage.
This document is the specification for the SDD. It consists
of both normative and non-normative prose, diagrams, schema and examples. The
document is intended to facilitate an understanding of the SDD concepts,
structure, syntax, semantics and usage. This document is not intended to be a
tutorial.
This document is the full SDD specification, but it also is
augmented with other documents produced by the SDD TC, including the SDD XML
Schema and Examples (see Appendix [A]), [SDDP],
[SDDSP] and the set of SDD profiles
(see section [5.3]), as well as documents produced by others (see section [5.3.1]).
This document is intended to assist those who require an
understanding of the nature and details of the SDD. This includes architects,
developers, solution integrators and service/support personnel who generate,
consume, or otherwise use SDDs, as well as those who develop tooling and
applications for constructing and deploying SDDs.
The various audiences of this specification might have
different objectives and purposes when reading the document. You might wish to
generally understand the SDD, or learn the details of the SDD to create or
consume SDDs, or use the document as a reference.
§ If your purpose is to
understand the major capabilities and characteristics of the SDD and how they
fit together, start by reading the Introductions to the major sections: [3], [4] and [4.1]–[4.14].
§ If your purpose is to
understand the major elements of the SDD and how they work together to
accomplish the goals of this specification, read in addition to the above, the
introductions to each of the type sections [3.1]–[3.13] and the type
subsections within sections [4.2]–[4.14].
§ If your purpose is to
understand the syntax of the SDD, look at the tables in each of the Property
Summary sections.
§ If your purpose is to
understand the semantics of the elements and attributes of the SDD, read the
Property Usage Notes sections.
§ If your purpose is to
understand only the package descriptor, subset the above suggestions to focus
on the sub-sections within section [3].
§ If your purpose is to
understand only the deployment descriptor, subset the above suggestions to
focus on the sub-sections within section [4].
The motivation for producing this specification is best
expressed in this excerpt from the SDD Technical Committee’s charter:
Deployment and lifecycle
management of a set of interrelated software, hereinafter referred to as a
solution, is a predominantly manual operation because there is currently no
standardized way to express installation packaging for a multi-platform
environment. Each hosting platform or operating system has its own format for
expressing packaging of a single installable unit but, even on these
homogeneous platforms, there is no standardized way to combine packages into a
single aggregated unit without significant re-creation of the dependency and
installation instructions. The problem is compounded when the solution is to be
deployed across multiple, heterogeneous, platforms. A standard for describing
the packaging and mechanism to express dependencies and various lifecycle management
operations within the package would alleviate these problems and subsequently
enable automation of these highly manual and error-prone tasks.
The purpose of this Technical
Committee is to define XML schema to describe the characteristics of an installable
unit (IU) of software that are relevant for core aspects of its deployment,
configuration and maintenance. This document will be referred to as the
Solution Deployment Descriptor (SDD).
SDDs will benefit member
companies and the industry in general by providing a consistent model and
semantics to address the needs of all aspects of the IT industry dealing with
software deployment, configuration and lifecycle management. The benefits of
this work include:
·
ability to describe software solution packages for both single
and multi-platform heterogeneous environments.
·
ability to describe software solution packages independent of
the software installation technology or supplier.
·
ability to provide information necessary to permit full
lifecycle maintenance of software solutions.
A summary of requirements satisfied by this SDD
specification follows. Detailed requirements that support approved use cases
are available at the SDD TC Web page, http://www.oasis-open.org/committees/sdd.
Solution lifecycle management
The SDD must provide information to support the complete
lifecycle of a software solution. Certain key requirements are applicable to
all phases of deployment lifecycle operation: planning, installation,
configuration, maintenance, upgrade, migration and uninstallation.
Solution requirements for environment
to perform lifecycle management tasks
A deployment lifecycle operation on a target resource is
often dependent on a certain set of conditions that must exist on the target.
This set of pre-existing conditions is known as the environment. If
successful deployment lifecycle operations are dependent on a certain set of
pre-existing conditions (environment), then the SDD specification must support
the ability to specify the required environment.
Projected changes to
environment
The SDD specification must support the definition of
environment changes that become effective once the lifecycle operation is
complete.
Solution instance variability
The SDD specification must support the definition of the
appropriate information for a runtime to vary the ways in which the solution
can be deployed. This information is also needed to enable an integrator to
control the variability according to the needs of their higher-level solution.
This variability includes the information to control (1)
the subset of capability that can be deployed; (2) setting the initial
configuration of the solution; and (3) varying the topology in which the
solution can be deployed.
Solution composition
The SDD specification must support the ability for the
author to compose solution packages from multiple components, products, or
solutions.
Solution and packaging identity
The SDD specification must support the definition of
identity information for the solution package, resources that make up the solution,
and solution itself to support use cases including asset management, license
management, support/update entitlement, component reuse during development, reports
and queries from a package repository, identifying associated documentation,
solution lifecycle management, traceability to build/development environment
and problem management systems, correlation into the hosting environment,
component reuse, and maintenance history. Also, the SDD specification must
support the definition of the identity description information used by a
runtime to assist a user in making correct decisions about solution
installation. The SDD specification must support the definition of the information
that uniquely identifies the SDD descriptor and the ability to identify the
version of the SDD. The customer should be able to identify the solution
packages with consistent names.
Physical packaging
Physical packaging information should be contained in a
separate media descriptor. The deployment model for a solution should be
decoupled from the details of physical packaging. The format and structure of
the physical packaging is outside the scope of SDD v1.0.
Interoperability with existing
software packaging technologies
The SDD specification must support the ability for the
author to compose solutions from existing software packages that do not have an
SDD. This means that the SDD should be able to describe existing software
packages.
Conform to external standards
The SDD specification must provide for alternative
descriptive text to be defined for any images, animations, or audio information
contained in the descriptor.
Decision support
Requirements to perform lifecycle management operations
within various target environments may not be satisfied in the target’s current
state but might be able to be satisfied with additional operations. For
example, successful deployment of a set of Java™
components is dependent on the existence of a Java runtime environment that is
not included with the solution. The SDD should have the ability to specify
information that will assist lifecycle management tools in planning for,
accessing and installing these external requirements.
Specification organization
The SDD specification must provide the semantic behavior
expected by producers and consumers of SDDs. This information allows for the
producers to ensure that the consumers of their SDDs will provide the support
intended.
Solution metadata
The SDD metadata may not encompass all of the information
about the solution in all contexts in which the solution can be deployed.
Additional metadata that is outside of the scope of the SDD is available at the
SDD TC Web page, http://www.oasis-open.org/committees/sdd.
Globalization
For all content in the SDD that would be displayed to a
user, the specification must support the definition of strings for multiple
locales; for example, this content must be localizable.
Align with other standards
bodies
Satisfying all the requirements listed here calls for
extensive standardization in specific areas. The requirements should thus be aligned
with other appropriate standards bodies. The SDD reuses existing OASIS and
other standards where appropriate and aligns with other standards bodies (for
example, [OGF-ACS]) that are
developing standards in the same domain as SDD.
The XML
namespaces defined as part of this specification are:
§ sdd-pd: stands
for the package descriptor portion of the SDD namespace.
§ sdd-dd: stands
for the deployment descriptor portion of the SDD namespace.
§ sdd-common:
stands for the common (shared) types, elements and groups of the SDD namespace.
For XML namespaces not defined as part of this
specification, conventional XML namespace prefixes are used as follows,
regardless of whether a namespace declaration is present in the example:
§ The prefix xsd:
stands for the W3C XML Schema namespace [XSD].
§ The prefix ds:
stands for the digital signature namespace [XMLDSIG-CORE].
Everything in the specification, including the Appendices,
is considered normative except for the abstract, examples and any sections or
other material marked as non-normative.
The keywords “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL
NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “MAY” and “OPTIONAL” in this
document are to be interpreted as described in [RFC2119].
These keywords are capitalized when used unambiguously to
specify requirements or application features and behavior. When these words are
not capitalized, they are meant in their natural-language sense.
In describing XML elements and attributes of the SDD schema,
this document contains many cross-references. Such references appear as the
referenced section number inside square brackets, for example, [4.5]. In
electronic versions of this specification, the cross-references can act as
links the target section.
The following property naming convention is used in the
schema: Element and type names begin with an uppercase letter and attribute
names begin with a lowercase letter.
Italics are used to identify element and attribute names,
type names and enumerated values defined by an SDD type.
In describing the XML schema, each section typically contains
the following subsections:
§ A diagram
illustrating the element, group, or type that is specified in the section.
§ Property Summary: A
table listing the schema elements and attributes, along with the data type,
cardinality and description for each one.
When specified, extension points are listed in the
tables with no name and a type of xsd:any
for element extensions and xsd:anyAttribute
for attribute extensions. Cardinality is also provided.
When a type is an extension of another type, the
extended type is listed in the table with no name and prefixed with [extends].
The extended type’s properties can be referenced from the appropriate section
listed in the description column.
When the schema specifies a default or fixed attribute
value, that value is prefixed with two asterisks, as in **default
value=“true”.
§ Property Usage Notes:
A list of the elements and attributes, along with more detailed prose
descriptions of the properties and how they fit into the schema as a whole.
§ Not all sections
contain every one of the preceding subsections.
Sections 3 and 4 of this specification contain diagrams
that illustrate the structure of elements, data types and groups used
throughout the SDD schema. Figure 1 is an example of this type of diagram.
Figure 1: Sample XML structure diagram.
Elements are represented by the element name inside a
rectangle. A rectangle with a solid border denotes an element.
Where appropriate, the cardinality of an element is
indicated by a rectangle with the cardinality listed underneath, using the form
“min..max”. For example, “1..∞” indicates a minimum of one
occurrence of the element and an unbounded upper limit:
References to global elements are denoted by a small arrow
in the lower right corner of the element’s rectangle:
Attributes are denoted by a “@” symbol followed by the
attribute name, inside a dashed rectangle.
Complex types are denoted by a rectangle with all the
corners truncated and a white square followed by the element name:
Simple types are denoted by a rectangle with all the corners
truncated and a white triangle followed by the element name:
Groups are denoted by a rectangle with three small squares
followed by the group name: black squares and a solid rectangle indicate
element groups and white squares with a dashed rectangle indicate attribute
groups:
A plus sign on the right border of a component indicates
hidden child elements or attributes. When hidden, the child elements are
usually described in a separate section.
There are two connectors (or compositors) used in the SDD
schema diagrams to combine elements:
§ A sequence of
elements is indicated by the following symbol: 
§ A choice among
elements is indicated by the following symbol: 
A large yellow box indicates a data type that is referenced.
Blue shading appearing in a figure has no significance; it
simply indicates that a component was currently selected in the XML editor.
The XSD schema figures were created with <oXygen/>.
1.11
Normative References
[CL2_Schema] Solution
Deployment Descriptor Schema
See Appendix [A] for location.
[CONFORM] OASIS,
OASIS Conformance Requirements for Specifications 1.0, http://www.oasis-open.org/committees/download.php/305/conformance_requirements-v1.pdf.
[IANA-CHARSET] Internet Assigned Numbers Authority, Character
Sets, http://www.iana.org/assignments/character-sets,
modified December 2006.
[IETF-UUID] Internet Engineering Task Force
Draft Specification, http://www.ietf.org/rfc/rfc4122.txt.
[ISO639.2] Library
of Congress, Codes for the Representation of Names of Languages, http://www.loc.gov/standards/iso639-2/englangn.html.
[ISO3166] International
Organization for Standardization, English Country Names and Code Elements,
http://www.iso.ch/iso/en/prods-services/iso3166ma/02iso-3166-code-lists/list-en1.html.
[RFC2119] S.
Bradner, Key words for use in RFCs to Indicate Requirement Levels, http://www.ietf.org/rfc/rfc2119.txt, IETF RFC 2119, March 1997.
[RFC3066] H. Alvestrand, ed. RFC
3066: Tags for the Identification of Languages 1995, http://www.ietf.org/rfc/rfc3066.txt.
[UNIT] Bureau
International des Poids et Mesures, http://www.bipm.fr.
[XMLDSIG-CORE] Bartel et al., XML-Signature Syntax and Processing,
http://www.w3.org/TR/xmldsig-core/, W3C Recommendation, February 2002.
[XSD] W3C Schema Working Group, XML Schema, http://www.w3.org/TR/xmlschema-1/,
W3C Recommendation, October 2004.
[CL1_Schema] Solution
Deployment Descriptor Conformance Level 1 Schema
See Appendix [A] for location.
[CIM] Distributed
Management Task Force, Inc., Common Information Model (CIM) http://www.dmtf.org/standards/cim/.
[OGF-ACS] Open Grid Forum,
Application Contents Service WG (ACS-WG), http://www.ogf.org/gf/group_info/view.php?group=acs-wg.
[SDDP] Solution
Deployment Descriptor Primer
http://docs.oasis-open.org/sdd/v1.0/sdd-primer-v1.0.doc
http://docs.oasis-open.org/sdd/v1.0/sdd-primer-v1.0.pdf
http://docs.oasis-open.org/sdd/v1.0/sdd-primer-v1.0.html
[SDDSP] Solution
Deployment Descriptor Starter Profile
http://docs.oasis-open.org/sdd/v1.0/sdd-starter-profile-v1.0.doc
http://docs.oasis-open.org/sdd/v1.0/sdd-starter-profile-v1.0.pdf
http://docs.oasis-open.org/sdd/v1.0/sdd-starter-profile-v1.0.html
The package descriptor defines package content which
includes artifacts whose processing results in deployment of the software
package. The deployment descriptor defines metadata associated with those
artifacts. The SDD package descriptor defines the package identity, the package
content and various other attributes of the package. Each SDD consists of
exactly one deployment descriptor and one package descriptor. The deployment
descriptor is where the topology, selectability, inputs, requirements and
conditions of the deployment are described.
The SDD’s topology describes all the resources that may be
required, created or modified when any of the deployment operations supported
by the SDD are performed.
Primary identifying characteristics of the resources can be
defined in topology. The topology includes identification of hosts–hosted by relationships
between resources. It is usual that only a subset of the resources described in
topology will play a role in any particular deployment. This is determined by
the selection of content elements for the particular deployment. The resources
that are required, created or modified by the content elements in scope for the
deployment are the ones that will participate in the deployment and so will be
associated with resources in the deployment environment.
At deployment time, definitions of the resources that
participate in that particular deployment are associated with actual resource
instances in the deployment environment. The mechanism for associating resource
definitions with resource instances is not defined by the SDD.
The only resource definitions in the SDD are in topology.
All other mention of resources in the SDD are references to the resource
definitions in the topology.
Metadata throughout the deployment descriptor is associated
with package content in the definition of atomic content elements. The atomic
content elements are InstallableUnit, ConfigurationUnit and LocalizationUnit.
These are the only content elements that define Artifacts elements.
Artifact elements identify an artifact file or set of files
defined in package content whose processing will perform all or a portion of
the deployment for a particular deployment lifecycle operation. Artifact
elements define the inputs and outputs, substitution values and types
associated with the artifact files. The content element’s target resource,
identified by targetResourceRef, processes the artifact files with the
defined inputs to perform deployment operations. Examples of artifact types
include zip files, rpm files and executable install files. Artifact types are
not defined by this specification. The artifact types defined in the SDD need
to be understood by software that processes the SDD. Profiles are used
to communicate the artifact types that an implementation is capable of
processing [5.3].
Composite content elements organize the content of an SDD
but do not define artifacts used to deploy SDD content. There are three types
of composite content elements: CompositeInstallable, CompositeUnit
and CompositeLocalizationUnit.
CompositeInstallable is used any time that more than
one content element is defined in support of one operation on the package; any
time aggregation of SDDs is needed; or any time the package includes selectable
content. CompositeInstallable is the root of a content hierarchy that
supports a single deployment lifecycle operation. It can define a base content
hierarchy, a localization content hierarchy and a selectable content hierarchy that
includes selection criteria. One SDD can have more than one CompositeInstallable–each
supporting a different operation.
CompositeUnit is used to organize content elements
within the base or selectable content hierarchies. CompositeUnits can
define InstallableUnits, ConfigurationUnits, ContainedPackages
and other CompositeUnits. Requirements, conditions and variables that
are common to all content elements defined by the CompositeUnit can be
defined in the CompositeUnit to avoid repetition. Within the selectable
content hierarchy, a CompositeUnit can provide an efficient means for
selection of a set of related content elements by a feature.
CompositeLocalizationUnit serves the same purposes as
CompositeUnit within the LocalizatonContent hierarchy.
SDD packages can aggregate other SDD packages. Metadata
about the aggregation is defined in ContainedPackage, ContainedLocalizationPackage
and Requisite elements. ContainedPackage elements are a content
element that can be defined anywhere in the base and selectable content
hierarchies. ContainedLocalizationPackages are content elements that can
be defined in the localization content hierarchy. Requisites are
packages that can be deployed, if necessary, to satisfy requirements in the
aggregating SDD. They are not content of the SDD package. The type of all three
of these elements is ReferencedPackageType. The term “referenced
package” is used in this specification when referring to these elements as a
group. The term “referenced SDD” is used when referring to any aggregated SDD.
Each referenced package element can further constrain the
deployment of the referenced SDD by defining additional requirements; by
mapping resources defined in the aggregating SDD to those defined in the
referenced SDD; and by determining feature selections for deployment of the
referenced SDD.
Deployment of an SDD package creates or modifies software
resources. These resources are included in the topology definition and
described in more detail in ResultingResource and ResultingChange
elements.
The SDD author can choose to model resulting and modified
resources at a very granular level, at a very coarse level; at any level in
between, or not at all. An example of modeling resulting resources at a
granular level would be modeling every file created by the deployment as a
resulting resource. An example of modeling resulting resources at a very coarse
level would be modeling the software product created by deployment as a single
resulting resource. The choice depends on the needs of the solution deployment.
If a resource is not modeled in the SDD, no requirements can be expressed on
it, no conditions can be based on it and no variables can be set from values of
its properties. It cannot play any of the roles described for resources in the ResourceType
section of this document [4.2.2].
Each CompositeInstallable element can define three
types of content hierarchies. Base content is the default content for the
deployment lifecycle operation associated with the CompositeInstallable.
This is content that will be deployed whenever the associated operation is
performed on the SDD package. Base content may be conditioned on
characteristics of the deployment environment but it is not selectable by the
deployer.
The SDD author can define selectable subsets of optional
content in the selectable content hierarchy. The selection criteria include
features and groups of features that select content from the selectable content
hierarchy. Selectability, as used in the SDD, is a characteristic of the
deployment lifecycle operation and the package. For example, the decision to
provide selectability for one operation in one package has no semantic
relationship to the selectability provided in another package related to the
same software. It also has no semantic relationship to the selectability
provided for a different operation within the same package.
Localization content is the third type of content hierarchy.
Localization refers to enabling a particular piece of software for support for
one or more languages. Anything that needs to be deployed to provide support
for a particular language in that software is considered localization content.
Translated materials are a primary, but not the only, example of localization
content.
Localization content is similar in many ways to other
content, but there are important differences in how localization content is
selected for deployment that lead to the need for a separate content hierarchy
and separate types. There are two criteria for determining that localization
content is in scope for a particular deployment.
§
The first criterion has to do with the language or languages
supported by the localization content. At least one of the languages must be in
scope for the content to be selected.
§
The second criterion has to do with the availability of the
resources to be localized–the localization base. The localization base may be a
resource deployed by base or selectable content, or it may be a resource
previously deployed and found in the deployment environment.
The SDD author needs to communicate constraints on resources
for a variety of purposes.
·
Some constraints must be met for the requirements of a content
element to be met.
·
Other constraints must be met for a resource to serve as the
required base for an update.
·
Still others must be met to satisfy a condition that determines
the applicability of a content element or completion action.
The Constraint types are:
- CapacityConstraint
- ConsumptionConstraint
- PropertyConstraint
- VersionConstraint
- UniquenessConstraint
- RelationshipConstraint
Requirements are defined by content elements. A requirement
consists of resource constraints that the SDD author states MUST be
met prior to successful deployment or use of the software described by the SDD
package. Each requirement definition lists one or more deployment lifecycle
operations to which the requirement applies. When the requirement is specified
in an atomic content element, the operation associates the requirement with
artifacts within the atomic content element
When a requirement can be satisfied in more than one way, alternatives
can be defined within a requirement. A requirement is considered met when any
one of the alternatives is satisfied.
Conditions are expressed on characteristics of resources in
the deployment environment. Conditions are used to indicate when particular
elements of the SDD are applicable, or when they should be ignored. Conditions
are not requirements. Failure to satisfy a condition does not indicate a
failure; it simply means the conditioned element should be ignored. Conditions are
used to:
§
determine if a content element is applicable
§
choose from among values for a variable
§
determine when a feature is applicable
§
determine when a particular result is applicable
§
determine if a particular completion action is necessary.
Because conditions are always based on the characteristics
of resources, they are expressed using resource constraints.
2.9 Variables
Variables provide a way to associate user inputs, resource
property values, fixed strings and values derived from these with input
arguments for artifacts and with constraints on resources.
A package descriptor is an XML document that provides
information about the identity and the contents of a software package. A software
package is a bundle of one or several content elements that deploy or
remove computer software;
add features to existing software; or apply maintenance to existing software. Each
package descriptor is associated with a deployment descriptor.
3.1 PackageDescriptor
Figure 2: PackageDescriptor structure.
The root element of a package descriptor XML document is PackageDescriptor.
PackageDescriptor includes elements that describe the package identity
and the contents that make up the package. The PackageDescriptor includes
the associated deployment descriptor XML document by defining a Content element
with a purpose attribute set to deploymentDescriptor.
|
Name
|
Data
Type
|
*
|
Description
|
|
PackageIdentity
|
PackageIdentityType
|
1
|
Human-understandable
identity information for the software package.
|
|
Contents
|
ContentsType
|
1
|
A
list of package contents.
|
|
ds:Signature
|
ds:SignatureType
|
0..1
|
A
signature for the package descriptor.
|
|
schemaVersion
|
xsd:string
|
1
|
The
descriptor complies with this version of the Solution Deployment Descriptor
Specification.
**fixed
value=“1.0”
|
|
descriptorID
|
UUIDType
|
1
|
Identifier
of a particular package’s descriptor.
|
|
lastModified
|
xsd:dateTime
|
1
|
The
time the descriptor was last modified.
|
|
descriptorLanguageBundle
|
xsd:token
|
0..1
|
The
root name of language bundle files containing translations for display text
elements in the PackageDescriptor.
|
|
|
xsd:anyAttribute
|
0..*
|
|
§ PackageIdentity:
The PackageIdentity element provides identity information about the software
package that can be used by the consumer of the package for deployment planning
or aggregation of the package into a larger solution.
See the PackageIdentityType section for structure
and additional usage details [3.3].
§ Contents: The Contents
element defines a list of one or more Content elements describing all
the files that are part of the package. All files in the package MUST be defined
in Contents.
See the ContentsType section for structure and
additional usage details [3.11].
§ ds:Signature: The
package descriptor and each file in the package MAY be digitally signed. It is
RECOMMENDED that they be digitally signed by using an XML-Signature [XMLDSIG-CORE].
The signature element is an enveloped signature over
the SDD package. Note that each Content element included in the package
is digitally signed indirectly via this digest. Files can also be individually
signed in the Content element.
§ schemaVersion,
descriptorID, lastModified, descriptorLanguageBundle: See
the DescriptorInfoGroup section for structure and additional usage
details [3.2].
3.2 DescriptorInfoGroup
Figure 3: DescriptorInfoGroup structure.
The attributes defined by DescriptorInfoGroup are
included in both PackageDescriptor and DeploymentDescriptor.
§ schemaVersion:
The schemaVersion attribute identifies the Solution Deployment
Descriptor specification version to which the descriptor conforms. It MUST have
a fixed value of “1.0”.
§ descriptorID:
The descriptorID attribute, combined with the lastModified attribute
value, provides a unique identifier for the descriptor. The descriptorID
value MUST be unique within the scope of use of the deployment descriptor or
package descriptor. The descriptorID attribute is an instance of UUIDType,
which is based on xsd:hexBinary with length
16. This enables use of a 128-bit UUID [IETF-UUID]. The descriptorID
value supports descriptor updates by allowing updated descriptors to be
correctly associated with an earlier version of the same descriptor.
For example, if a descriptor contains errors, it may
be replaced by an error-free version using the same descriptorID value
but a different lastModified value.
§ lastModified:
The lastModified value can be used to differentiate between different
versions of the same descriptor, for example, the descriptor for one particular
package. Comparison of lastModified values can be used to determine
which descriptor is newer.
The lastModified
attribute MUST be defined as a value that conforms to the xsd:dateTime type as defined in [XSD] and MUST match the following lexical
representation: [-]CCYY-MM-DDThh:mm:ss[Z|(+|-)hh:mm].
This is a combination of a complete date and time of day, where the time zone
can be specified as Z (UTC) or (+|-)hh:mm.
For example, the following are valid values for the lastModified
attribute:
§
2001-10-26T21:32:52
§
2001-10-26T21:32:52+02:00
§
2001-10-26T19:32:52Z
§
2001-10-26T19:32:52+00:00
§
-2001-10-26T21:32:52
§
2001-10-26T21:32:52.12679
However, the following values would be invalid:
§
2001-10-26
§
2001-10-26T21:32
§
01-10-26T21:32
§
2001-10-26T25:32:52+02:00
The first three invalid examples do not specify all
the required parts, and the fourth includes an out of range hours part, “25”.
§ descriptorLanguageBundle:
Language translations for elements of DisplayTextType in the descriptor MAY
be included in the solution package. Note that these are not translations for
the software deployed by the package, but rather translations only for the text
in the descriptors themselves. The root name of the files containing these
translations can be specified in the descriptorLanguageBundle attribute,
which is an instance of xsd:token. Language
bundles are associated with specific locales at run time using Java-style
resource bundle resolution; that is, the bundle file names SHOULD take the form
languageBundle_locale, where locale consists of optional
language, location (country) and variant codes, separated by an underscore
character. Language codes consist of two lowercase letters [ISO639.2] and location codes consist of two
uppercase letters [ISO3166].
For example, “SampleStrings_en_US” refers to the
United States English version of the SampleStrings bundle and
“SampleStrings_ja” identifies the Japanese version of the same bundle.
See the DisplayTextType section for structure
and additional usage details [4.14.3].
Figure 4: PackageIdentityType structure.
The software package described by the SDD can be identified
for humans and package management software using the properties in PackageIdentity.
The PackageIdentity is not to be confused with the identity of the
deployed software, which is described in the resulting resource elements of the
deployment descriptor; see the ResultingResourceType section [4.8.1].
|
Name
|
Data
Type
|
*
|
Description
|
|
|
[extends]
IdentityType
|
|
See
the IdentityType section for additional properties [3.4].
|
|
packageType
|
PackageTypeType
|
0..1
|
The
type of the package, for example, “baseInstall” or “maintenance”.
**default
value=“baseInstall”.
|
|
contentType
|
xsd:QName
|
0..1
|
The
type of content provided by this package, for example, BIOS.
|
|
label
|
xsd:NCName
|
0..1
|
A
programmatic label for this package.
|
|
|
xsd:anyAttribute
|
0..*
|
|
See the IdentityType section for details of the
inherited attributes and elements [3.4].
§ packageType:
The package type is provided to aid consumer understanding of the type of
content contained in the package. A package can contain more than one type of
content. In this case, a single packageType value should be selected
that represents the primary content type as determined by the SDD author. The
SDD defines a set of enumeration values in PackageTypeType which are
extendable by the SDD author.
The enumerated types defined by the SDD are as follows:
·
baseInstall: The value baseInstall indicates that
the package provides a complete installation of the solution. This package type
is associated with deployment descriptors that contain installable units with
installation artifacts that install the primary solution resources.
When packageType is not specified, this is the
default value.
·
baseUninstall: The value baseUninstall indicates
that the package provides a complete uninstallation of the solution. This
package type is associated with deployment descriptors that contain installable
units with uninstall artifacts that remove the primary solution resources.
·
configuration: The value configuration indicates
that the package configures the solution. This package type is associated with
deployment descriptors that contain configuration units with configuration
artifacts that configure the solution.
·
maintenance: The value maintenance indicates that
the package fixes one or more problems in the solution. This package type is
associated with deployment descriptors that contain installable units with update
artifacts.
·
modification: The value modification indicates that
the package modifies the function of the solution in some way such as by adding
new function. This package type is associated with deployment descriptors that
contain installable units with update artifacts.
·
replacement: The value replacement indicates that
the package installs a solution that replaces a previous version of the solution.
Replacement MAY be associated with migration of data into the new solution
and/or with deletion of the replaced solution. When associated with migration
of data, installation or configuration artifacts within the solution package
would perform the migration. When associated with deletion of the replaced
solution, uninstall artifacts within the solution package would perform the
deletion. This package type is associated with deployment descriptors that contain
installable units with installation artifacts that deploy a set of resources that
replace the set of resources associated with a previous version of the solution.
·
localization: The value localization indicates that
the package contains materials that localize deployed software for one or more
languages.
§ contentType: The
value of contentType is determined by the SDD manufacturer to
communicate a characteristic of the package that MAY be used in the
manufacturer’s package management system or other manufacturer-specific tools
that use the SDD. The SDD author chooses the values; they are not defined in
this specification.
§ label: The
label MAY be used as an index in a package management system. The SDD author
chooses the values; they are not defined in this specification.
3.4 IdentityType
Figure 5: IdentityType structure.
This complex type provides identity information for the
package as a whole, as well as for content elements, which are portions of the
package. Content elements are the InstallableUnit, LocalizationUnit,
ConfigurationUnit, CompositeUnit and CompositeInstallable elements
defined in the deployment descriptor.
|
Name
|
Data
Type
|
*
|
Description
|
|
Description
|
DisplayTextType
|
0..1
|
A
verbose description of the package or content element.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
A
limited description of the package or content element.
|
|
Name
|
DisplayTextType
|
0..1
|
A
human-readable, translatable, name for the package or content element.
|
|
Version
|
VersionType
|
0..1
|
The
package or content element version.
|
|
MaintenanceInformation
|
MaintenanceInformationType
|
0..1
|
Information
about package or content element content used when the package contains
maintenance.
|
|
BuildInformation
|
BuildInformationType
|
0..1
|
A
manufacturer identifier for the build of this package or content element.
This property can be extended with additional manufacturer-specific
information about the build.
|
|
Manufacturer
|
ManufacturerType
|
0..1
|
Information
about the manufacturer of the package or content element.
|
|
|
xsd:any
|
0..*
|
|
|
softwareID
|
xsd:string
|
0..1
|
A
manufacturer’s identification number for the software created or updated by
the package or content element.
|
|
|
xsd:anyAttribute
|
0..*
|
|
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the package.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DisplayTextType
section for structure and additional usage details [4.14.3].
§ Name: When the
manufacturer of the SDD has a package management system, Name in PackageIdentity
should correspond to the name of the package as known in the package management
system. Name in a content element’s Identity should correspond to
the name of the unit of packaging, if it is known in the package management
system.
When the PackageIdentity element is defined, Name
MUST be defined.
Software packages that create software often have the
same name as the deployed software. Software packages that update software
often have a name that reflects the fact that the package is a maintenance
package, differentiating it from the base deployed software. The author of the software
package that is described by PackageIdentity determines whether the Name
is the same as or different from the Name of the deployed software.
See the DisplayTextType section for structure
and additional usage details [4.14.3].
§ Version: This
is a packaging version. In PackageIdentity, it is the version of the
package as a whole. In content element identities, this is the version of the unit
of packaging represented by the content element. In either case, the SDD author
MAY choose to make this version correspond to the version of a resulting or
changed resource, but it should not be confused with resource versions.
In the case of a base install, version MAY be the same
as the top level resulting resource. In the case of a configuration package,
version SHOULD NOT be the same as the top level resulting resource.
See the VersionType section for structure and
additional usage details [3.10].
§ MaintenanceInformation:
This is used when the package or content element describes the deployment of
maintenance.
See the MaintenanceInformationType
section for structure and additional usage details [3.5].
§ BuildInformation:
In PackageIdentity, this describes the build of the package as a whole.
In content element Identity, this describes the build of the artifact(s)
and the content element describing the artifact.
See the BuildInformationType
section for structure and additional usage details [3.7].
§ Manufacturer:
See the ManufacturerType section for structure and additional usage
details [3.8].
§ softwareID: The
software identified by softwareID is the software whose deployment is
described by the SDD. When the manufacturer maintains software identifiers
within a sales and distribution system, the softwareID SHOULD correspond
to an identifier for the software within that system. If a format for software
identifiers is not pre-existing within the manufacturer’s systems, a UUID
SHOULD be used for softwareID. When a UUID is used, it MUST be unique
within the domain in which the described software is used.
Figure 6: MaintenanceInformationType structure.
If the package provides maintenance for deployed software, MaintenanceInformation
declares information about the fix or fixes provided. If the package content is
a single fix, MaintenanceInformation describes the information about
that one fix. If the content is a collection of fixes—for example, a fix pack—MaintenanceInformation
describes each of the fixes provided by the fix pack.
|
Name
|
Data Type
|
*
|
Description
|
|
Severity
|
DisplayTextType
|
0..1
|
Severity
of the maintenance content.
|
|
Category
|
DisplayTextType
|
0..*
|
Category
of the maintenance content.
|
|
Supersedes
|
MaintenanceInformationType
|
0..*
|
A
previously released fix that is superseded by application of this
maintenance.
|
|
Fix
|
FixIdentityType
|
0..*
|
An
included fix.
|
|
|
xsd:any
|
0..*
|
|
§ Severity: This
value SHOULD correspond to a severity value used within the SDD provider’s
support system. It serves as a hint to the deployer about the urgency of
applying the described maintenance.
See the DisplayTextType section for structure
and additional usage details [4.14.3].
§ Category:
These values SHOULD correspond to maintenance categories within the SDD
provider’s support system.
See the DisplayTextType section for structure
and additional usage details [4.14.3].
§ Supersedes:
Superseded fixes are ones that fix a problem also fixed by the superseding
maintenance package or content element and therefore need not be applied.
This element does not indicate
whether or not the superseded fix needs to be removed. To indicate that the
previous fix must be removed before the superseding maintenance can be applied successfully;
the SDD author can create a requirement stating that the fix must not be
present.
Superseded fixes MAY include all
the information defined in MaintenanceInformationType. At a minimum, a
superseded fix MUST include at least one Fix element with the name of
the superseded fix defined.
§ Fix: Fix
elements provide information about individual fixes provided by the maintenance
content.
See the FixIdentityType section for structure
and additional usage details [3.6].
Figure 7: FixIdentityType structure.
Elements of FixIdentityType describe fixes that will
be applied when the package is deployed or the content element is applied.
|
Name
|
Type
|
*
|
Description
|
|
Name
|
xsd:NMTOKEN
|
1
|
A
name for the fix which is, at a minimum, unique within the scope of the
resource fixed.
|
|
Description
|
DisplayTextType
|
1
|
A
complete description of the fix.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
An
abbreviated description of the fix.
|
|
Symptom
|
DisplayTextType
|
0..*
|
A
symptom of the problem fixed.
|
|
|
xsd:any
|
0..*
|
|
§ Name: The Name
element MUST provide a value that uniquely identifies a fix within a scope
defined by the manufacturer. This is a name provided by the manufacturer that
corresponds to the fix name as understood in the deployment environment.
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the fix.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DisplayTextType
section for structure and additional usage details [4.14.3].
§ Symptom:
Symptom strings can be used to correlate a fix with one or more experienced
problems.
See the DisplayTextType section for structure
and additional usage details [4.14.3].
Figure 8: BuildInformationType structure.
BuildInformationType provides the type definition for
the BuildInformation element in package and content element identity. BuildInformation
provides information about the creation of the package and its parts.
|
Name
|
Type
|
*
|
Description
|
|
buildID
|
xsd:token
|
1
|
Identifies
the build of the package or package element.
|
|
|
xsd:anyAttribute
|
0..*
|
|
§ buildID: The buildID
attribute is an identifier provided by the manufacturer and meaningful to
developers that can be used to identify a build of the defining element. This
information MUST correspond with information known in the manufacturer’s build
environment. It is traditionally used during problem determination to allow
maintainers of the software to determine the specifics of package creation.
Inclusion of buildID in the SDD allows the end user to provide this
information to package maintainers, enabling them to correlate the deployed
software with a particular known build of the software.
3.8
ManufacturerType
Figure 9: ManufacturerType structure.
The SDD author can include information about the package
manufacturer that includes name, location and contact information such as the
address of the manufacturer’s Web site or telephone number.
|
Name
|
Type
|
*
|
Description
|
|
Name
|
DisplayTextType
|
1
|
A
translatable name for the manufacturer.
|
|
Location
|
LocationType
|
0..1
|
The
address and country of the manufacturer.
|
|
ContactInformation
|
DisplayTextType
|
0..1
|
Contact
information for the manufacturer.
|
|
|
xsd:any
|
0..*
|
|
§ Name: The
value provided in the Name element MUST be an identifiable name of the
manufacturer of the SDD.
See the DisplayTextType section for structure
and additional usage details [4.14.3].
§ Location: See
the LocationType section for structure and additional usage details [3.9].
§ ContactInformation:
This element MAY provide additional contact information for the named
manufacturer, such as a support Web site address or a technical support
telephone number.
See the DisplayTextType section for structure
and additional usage details [4.14.3].
Figure 10: LocationType structure.
LocationType supports inclusion of the manufacturer’s
address and country in package and content element identity.
|
Name
|
Type
|
*
|
Description
|
|
Address
|
DisplayTextType
|
0..1
|
The
manufacturer’s address.
|
|
Country
|
DisplayTextType
|
0..1
|
The
manufacturer’s country.
|
§ Address: This is
the mailing address or the physical address.
See the DisplayTextType section for structure
and additional usage details [4.14.3].
§ Country: Recording
the manufacturer’s country in the SDD provides information that may be of
interest in relation to import and export of software.
See the DisplayTextType section for structure
and additional usage details [4.14.3].
VersionType provides the type definition for version
elements in the package descriptor and deployment descriptor. It is a simple
type that is based on xsd:string with no
further restrictions. This means that versions in the SDD are represented
simply as strings. Because resource versions exist in the deployment
environment, their formats and semantics vary widely. For this reason, the
format and semantics of versions are not defined by this specification.
Figure 11: Contents structure.
ContentsType is used in PackageDescriptor to
provide a list of one or more Content elements.
|
Name
|
Type
|
*
|
Description
|
|
Content
|
ContentType
|
1..*
|
Describes
the physical contents of the software package.
|
§ Content: A PackageDescriptor
MUST contain a Contents element that is a list of one or more Content
elements.
See the ContentType section for structure and
additional usage details [3.12].
Figure 12: ContentType structure.
A software package includes one or more content files. ContentType
defines the properties of a content file included in the package descriptor. Content
defined in the package descriptor as part of the software package does not need
to be physically co-located. Each element MUST be in a location that can be
identified by a URI. The pathname attribute of each content file defines
a URI for accessing the file. Characteristics of the content files—such as
their length, purpose and character encoding—MAY be declared in the package
descriptor.
|
Name
|
Data Type
|
*
|
Description
|
|
ds:DigestMethod
|
ds:DigestMethodType
|
0..1
|
Specifies the digest method applied to the file.
|
|
ds:DigestValue
|
ds:DigestValueType
|
0..1
|
Specifies the Base64-encoded
value of the digest
of the file.
|
|
id
|
xsd:ID
|
1
|
An identifier used in deployment descriptors to
refer to the file definition in the associated package descriptor.
|
|
pathname
|
xsd:anyURI
|
1
|
The absolute or relative path of the content file
including the file name.
|
|
purpose
|
ContentPurposeType
|
0..1
|
Associates a purpose classification with a file.
**default value=“content”
|
|
charEncoding
|
xsd:string
|
0..1
|
Specifies the character encoding of the contents
of the file.
|
|
length
|
xsd:nonNegativeInteger
|
0..1
|
Specifies the size of the file in bytes.
|
|
|
xsd:anyAttribute
|
0..*
|
|
§ ds:DigestMethod,
ds:DigestValue: These values MAY be used to assist with file verification.
See the DigestInfoGroup section for structure
and additional usage details [3.13].
§ id: This is
the identifier for the content that is used as a reference in artifact elements
in the deployment descriptor.
The id attribute may be useful to software that
processes the SDD, for example, for use in creating log and trace messages.
§ pathname: pathname
is used to access content in the package. The path of the file MUST be a URI
that specifies an absolute path or a path relative to the location of the
package descriptor. It MUST include the file name.
§ purpose: The purpose
attribute enables the PackageDescriptor author to associate a
classification with a file. The classification identifies the file as having a
specific purpose. ContentPurposeType defines a union of SDDContentPurposeType
with xsd:NCName. The purpose value MAY be
chosen from one of the following values enumerated in SDDContentPurposeType
or be a valid NCName value provided by the SDD author. If purpose is not
specified, the default value is content.
Enumerated values for purpose are:
·
readMe: A file with information about the package. An
implementation may choose to display this to a user as part of the deployment
process.
·
endUserLicenseAgreement: A file containing an end user
license agreement. An implementation may choose to display this to a user as
part of the deployment process.
·
responseFile: A file that contains input values for an
operation.
·
deploymentDescriptor: An XML file containing the DeploymentDescriptor
definition associated with the PackageDescriptor. A valid PackageDescriptor
MUST have exactly one Content element with a purpose value of deploymentDescriptor.
·
packageDescriptor: Supports aggregation of packages.
This is used to reference a packageDescriptor of an aggregated package.
·
descriptorLanguageBundle: A file containing translations
of text defined directly in the package descriptor or its associated deployment
descriptor.
·
content: A file used during deployment of solution
content. This is the default value for purpose.
§ charEncoding: This
attribute need only be used for files that a run-time is required to render. Common
charEncoding values include “ASCII”, “UTF-8”, “UTF-16” and “Shift_JIS”.
For an extensive list of character encodings, see [IANA-CHARSET].
§ length: The
file length MAY be used for simple file verification.
3.13
DigestInfoGroup
Figure 13: DigestInfoGroup structure.
When digest information is used to sign a content file, both
the digest method and the digest value MUST be provided.
§ ds:DigestMethod,
ds:DigestValue: ds:digestMethod and ds:digestValue MAY be
used to digitally sign individual files. If files are signed, the digest value
MUST be calculated over the whole of each file.
See [XMLDSIG-CORE]
for details on the usage of ds:DigestMethod and ds:DigestValue.
A solution package contains a deployment descriptor in
addition to a package descriptor. The deployment descriptor describes the
topology, selectability, inputs, requirements and conditions of the deployment.
The deployment descriptor is associated with a package descriptor and refers to
content files in that package descriptor.
4.1 DeploymentDescriptor
Figure 14: DeploymentDescriptor structure.
DeploymentDescriptor is the top level element of a deployment
descriptor. The DeploymentDescriptor defines the information required to
support deployment of the package contents. This includes the Topology,
which declares all of the resources that may participate in deployment. It also
includes one atomic content element or one or more CompositeInstallable
content elements. Atomic content elements are InstallableUnit, ConfigurationUnit,
or LocalizationUnit. Atomic content elements define artifacts that can
be processed to deploy software resources. They are atomic because they cannot
aggregate other content elements. A CompositeInstallable element is the
root of a content element hierarchy that defines content that performs the one
deployment operation supported by the CompositeInstallable. A CompositeInstallable
can define base, selectable and localization content as well as the aggregation
of other content elements.
|
Name
|
Data Type
|
*
|
Description
|
|
Topology
|
TopologyType
|
1
|
Defines resources that are required, created or
modified by deployment.
|
|
InstallableUnit
|
InstallableUnitType
|
0..1
|
Defines content that installs, updates and/or
uninstalls resources. When an InstallableUnit is defined, no
ConfigurationUnit, LocalizationUnit or CompositeInstallable elements can be
defined.
|
|
ConfigurationUnit
|
ConfigurationUnitType
|
0..1
|
Defines content that configures resources. When
a ConfigurationUnit is defined, no InstallableUnit, LocalizationUnit or
CompositeInstallable elements can be defined.
|
|
LocalizationUnit
|
LocalizationUnitType
|
0..1
|
Defines content that installs, updates and/or
uninstalls translated materials. When a LocalizationUnit is defined, no
InstallableUnit, ConfigurationUnit or CompositeInstallable elements can be
defined.
|
|
CompositeInstallable
|
CompositeInstallableType
|
0..*
|
Defines a hierarchy of base, selectable and/or
localization content used to perform one deployment lifecycle operation. When
one or more CompositeInstallable elements are defined, no InstallableUnit,
ConfigurationUnit or LocalizationUnit elements can be defined.
|
|
Requisites
|
RequisitesType
|
0..1
|
A list of references to SDD packages that can
optionally be deployed to satisfy deployment requirements of the defining
SDD.
|
|
|
xsd:any
|
0..*
|
|
|
schemaVersion
|
xsd:string
|
1
|
The
descriptor complies with this version of the Solution Deployment Descriptor
Specification.
**fixed
value=“1.0”
|
|
descriptorID
|
UUIDType
|
1
|
Identifier
of the deployment descriptor for a particular set of deployable content.
|
|
lastModified
|
xsd:dateTime
|
1
|
The
time the descriptor was last modified.
|
|
descriptorLanguageBundle
|
xsd:token
|
0..1
|
The
root name of language bundle files containing translations for display text
elements in the deployment descriptor.
|
|
|
xsd:anyAttribute
|
0..*
|
|
§ Topology: Topology
provides a logical view of all resources that may participate in any particular
deployment. A resource can participate by being required, created or modified
by the deployment. A required resource MAY also play the role of target
resource, meaning that it can process artifacts to perform some portion of the
deployment. The resources that actually participate in a particular deployment
are determined by the user inputs, selections and resource bindings provided
during that deployment.
See the TopologyType section for structure and
additional usage details [4.2.1].
§ InstallableUnit,
ConfigurationUnit, LocalizationUnit, CompositeInstallable: A simple
software deployment that uses a single artifact for each supported deployment
operation MAY be described using an SDD that defines a single atomic content
element–InstallableUnit, ConfigurationUnit or LocalizationUnit.
A software deployment that requires multiple
artifacts, aggregates other deployment packages or has selectable content MAY be
described using an SDD that defines one or more CompositeInstallable
elements. Each CompositeInstallable MUST describe one deployment
lifecycle operation for the package.
See the respective sections (InstallableUnitType
[4.3.1], ConfigurationUnitType [4.3.2], LocalizationUnitType [4.13.2] and CompositeInstallableType [4.9.1]) for structure and additional
usage details.
§ Requisites: When
the package author chooses to provide deployment packages for required
software, those packages are described by Requisite elements in Requisites.
Including requisite packages in the SDD package MAY provide
a convenient way for the deployer to satisfy one or more SDD requirements.
See the RequisitesType section for structure
and additional usage details [4.10.5].
§ schemaVersion,
descriptorID, lastModified, descriptorLanguageBundle: These
attributes can be useful to tooling that manages, creates or modifies
deployment descriptors and to tooling and deployment software that displays
information from the deployment descriptor to humans.
See the DescriptorInfoGroup section for structure
and additional usage details [3.2].
4.2 Topology
The SDD’s topology describes all the resources that may be
required, created or modified when any of the deployment operations supported
by the SDD are performed.
Primary identifying characteristics of the resources can be
defined in topology. Constraints beyond these primary characteristics are not
defined in topology; they are defined in content elements that reference the
resource definitions in topology.
The topology includes identification of hosts–hostedBy
relationships between resources. When both resources in that relationship
participate in a particular deployment, the relationship is considered a
requirement for that deployment.
It is possible that only a subset of the resources described
in topology will play a role in a particular deployment. This is determined by
the selection of content elements for the particular deployment. The resources
that are required, created or modified by the content elements in scope for the
deployment are the ones that will participate in the deployment and so are associated
with resources in the deployment environment.
At deployment time, definitions of the resources that
participate in that particular deployment are associated with actual resource
instances in the deployment environment. The mechanisms for associating
resource definitions with resource instances are not described by the SDD. The
SDD metadata describes the characteristics of the participating resources.
Whether associations of resource instances with matching characteristics are
made by user choice or entirely by software does not affect the success of the
deployment. Resource characteristics used when making this association include
those defined in topology plus all those defined in constraints on the resource
in the content elements that are in scope for the particular deployment.
Some topologies are variable. That is, a particular set of
logical resources of the same type in the topology might be associated with
different physical resource instances or the same physical resource during
deployment. In this case, a separate logical resource definition is created in
topology for each possible physical resource instance. Uniqueness constraints
can then be used to describe the conditions under which the separate resources
can be associated with a single resource.
All resource definitions in the SDD are in topology. All other
descriptions of resources in the SDD are references to the resource definitions
in the topology.
Figure 15: TopologyType structure.
The Topology element defines one or more hierarchies
of resource specifications that describe the resources that MAY play a role in the
deployment of the contents of the solution package. These resource specifications
do not identify specific resource instances in a specific deployment
environment. Instead, they are logical specifications of resources that can be
associated with specific resource instances in the deployment environment for a
particular deployment based on the described resource identity characteristics.
These resources have a role in a particular solution deployment only when they
are required, created or modified by a content element, or referred to by a
variable, in that particular solution deployment.
|
Name
|
Type
|
*
|
Description
|
|
Resource
|
ResourceType
|
1..*
|
The root of a tree of resources that play a role
in the solution.
|
|
|
xsd:any
|
0..*
|
|
§ Resource: The
SDD author’s decision to model a resource in the deployment environment as a
resource in the SDD depends on the need to know about that resource when
planning for deployment, aggregating, deploying and managing the resource
lifecycle using the SDD. All resources required by the solution SHOULD be
included. For all Requirements declared in the SDD, resources MUST be
specified. Resources referred to by ResultingResource or ResultingChange
elements MUST also be included. The more complete the SDD is, the more useful
it will be in guiding successful deployment.
See the ResourceType section for structure and
additional usage details [4.2.2].
4.2.2 ResourceType
Figure 16: ResourceType structure.
Elements of ResourceType—both the top level Resource
elements and the HostedResource elements within the resource hierarchy—make
up the topology of an SDD. Each Resource element declares, at a minimum,
the type of the resource. Values for resource type are not defined by this
specification. A core assumption of this specification is that an understanding
of specific resource types and resource characteristics are shared by the deployment
descriptor author and the deployment software. Therefore, if the deployment
descriptor author declares a new resource type, then deployment software
operating on the SDD needs to understand how to handle that resource type.
In addition to defining type, the resource elements MAY specify
a name and other identity properties that can be used to identify instances of
the resource in the deployment environment. The resource identity elements, Name
and Property, are optional and MAY be specified in content elements rather
than in topology. Identity properties used in the resource specification in
topology MUST be those that do not change during deployment, even when the
resource is updated. Because resource versions can often change during an
update, there is no version element in resource specifications in Topology.
Values can be defined for resource name and resource properties that help to
identify the resource. These represent the basic identity of the resource and
are true for all uses of the resource in the solution.
ResourceType provides the type definition for the Resource
and HostedResource elements defined in Topology. All resources MAY
nest resource definitions for resources that they host. To host a resource
means to provide the execution environment for that resource.
For example, an operating system provides the
execution environment for software, and a database engine provides the
execution environment for a database table. The operating system hosts the
software and the database engine hosts the database table.
Each resource in these hierarchies may play a role in
solution deployment.
Content elements determine a resource’s participation and role(s)
in a particular solution deployment. Content elements can refer to resources in
Topology in several ways. A resource can be identified via xsd:IDREF:
- as the target of the content element’s artifacts. A target
resource is a resource that is capable of processing a particular
artifact. A target resource is often, but not always, the host of the
resources created by the artifacts it processes.
For example, an operating system may be the target of
an artifact that is a zip file. When the files are unzipped, the file system
resource is the host of those files.
See the targetResourceRef attribute
in the InstallableUnitType [4.3.1], ConfigurationUnitType [4.3.2] and LocalizationUnitType [4.13.2] sections.
- as the required base for an update applied by the artifact
referenced by the content element.
See the RequiredBaseType
section [4.7.8].
- as the resource that will be created by deploying the artifact
referenced by the content element.
See the ResultingResourceType
section [4.8.1].
- as the resource that will be changed by deploying the artifact
referenced by the content element.
See the ResultingChangeType
section [4.8.2].
- as the localization base for translated materials. The localization
base is the resource that is localized by deploying the translated
materials.
See the LocalizationBase element
in the LocalizationUnitType section [4.13.2].
- as a required resource named in the content element’s Requirements.
See the RequirementsType
section [4.7.1].
- to establish a variable value from a resource property.
See the ResourcePropertyType
section [4.6.12].
One resource MAY be referred to by any number of content
elements and can be identified to play any or all of the roles just listed. When
a content element participates in a particular solution deployment, the
resources it references participate in that solution deployment and are associated
with resource instances in the deployment environment.
|
Name
|
Type
|
*
|
Description
|
|
Description
|
DisplayTextType
|
0..1
|
A
description of the resource and its role in the solution described by the
SDD.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
A
short description of the resource and its role.
|
|
Name
|
VariableExpressionType
|
0..1
|
The
name of the resource as known in the deployment environment.
|
|
Property
|
PropertyType
|
0..*
|
An
identity property of the resource.
|
|
HostedResource
|
ResourceType
|
0..*
|
A resource
that participates in the solution and that is hosted by the defining
resource.
|
|
|
xsd:any
|
0..*
|
|
|
id
|
xsd:ID
|
1
|
An
identifier of the resource scoped to the descriptor.
|
|
type
|
ResourceTypeNameType
|
1
|
A
well-known resource type.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.2.2.2 ResourceType
Property Usage Notes
§ Description,
ShortDescription: If used, these elements MUST provide a human-readable description
of the resource.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DescriptionGroup section for structure
and additional usage details [4.14.1].
§ Name: The resource
name is an identifying characteristic of the resource that correlates with a
name for the resource in the deployment environment.
The type of the Name element, VariableExpressionType,
allows the resource name to be expressed as a simple string or in terms of a
user input parameter or other variable.
An example of a good use of a variable expression in Resource.Name
is to make sure that the installation directory is hosted on a file system that
has sufficient space available for deployment. In this example, the file system
resource element would define a HostedResource element for the
directory. The Name of the directory would be expressed as a variable
expression that refers to a user input parameter for installation location.
Content elements that use the installation directory would express a
requirement on the directory and on the file system with the additional
constraint that the file system have a certain amount of available space (to
satisfy the consumption constraints). The fact that both resources are required
and that they are defined with a hosts–hostedBy relationship in Topology,
means that the directory that is used must be the installation directory and it
must be hosted by a file system that meets the consumption constraint for available
space.
Only the Variable elements defined in a top
level content element can be used to define a resource Name, because these
are the only variables visible within Topology.
If the name of a resource is changed during
deployment, for example, during an update, then the resource name SHOULD NOT be
included in the resource specification. Instead, the pre-update resource name SHOULD
be specified in the RequiredBase element of the installable unit that
provides the update, and the post-update name SHOULD be specified in the ResultingResource
element of the same installable unit.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
§ Property: Property
elements SHOULD be used when Name alone is not sufficient to identify
the resource. The property used represents an identifying characteristic of a
resource.
See the PropertyType section for structure and
additional usage details [4.2.3].
§ HostedResource:
A Resource MAY define HostedResource elements. Each HostedResource
element is an instance of ResourceType. When both the host and the
hosted resource participate in a particular solution deployment, the associated
resource instances selected for use during that deployment must have a hosts
relationship.
For example, a Web application declared to be hosted
on a Web server must be hosted on the instance of the Web server that is
selected for use during the deployment.
If only the host resource is identified by the DeploymentDescriptor’s
content elements as participating in the solution, then there is no assumption
that the hosted resource exists.
§ id: The id
attribute uniquely identifies the resource element within the DeploymentDescriptor.
This id value is used by other elements in the DeploymentDescriptor
to refer to this resource. This value is created by the descriptor author.
The id attribute may be useful to software that
processes the SDD, for example, for use in creating log and trace messages.
§ type: The type
attribute defines the class of resource. The value of type correlates
with the resource type known for the resource in the deployment environment. ResourceTypeNameType
restricts type to valid xsd:QNames. The
values for type are not defined by this specification. Creators of DeploymentDescriptors
rely on knowledge of resource types that are understood by supporting
infrastructure in the target environment. To honor the descriptor author’s
intent, the deploying infrastructure must be able to discover the existence of
resources of the types defined in the SDD; the values of the resource’s
properties; and the existence and type of resource relationships. The deploying
infrastructure also needs to understand how to use the artifact types
associated with the resource type to create, modify and delete the resource.
4.2.3
PropertyType
Figure 17: PropertyType structure.
PropertyType provides the type definition for
elements used to declare an identity property of a resource, namely, the Property
elements of Resource and HostedResource in Topology. It also
provides the type definition for Property elements in Relationship
and RelationshipConstraint.
4.2.3.1 PropertyType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
PropertyName
|
xsd:QName
|
1
|
The
property name.
|
|
Value
|
VariableExpressionType
|
1
|
The
property value.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.2.3.2 PropertyType Property Usage Notes
§ PropertyName: The
PropertyName MAY be used to provide additional identification for the
resource in the deployment environment.
The PropertyName MAY be used to provide
constraints on the configuration of a resource.
§ Value:
Evaluation of the Value expression provides the value of the property.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
Figure 18: ResultingPropertyType structure.
ResultingPropertyType provides the type definition for
elements used to declare an identity property of a resulting resource or to
declare a configuration change to a resource property which results from
deployment of an artifact.
4.2.4.1 ResultingPropertyType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
PropertyName
|
xsd:string
|
1
|
The resulting
property name.
|
|
Value
|
VariableExpressionType
|
1
|
The resulting
property value.
|
|
|
xsd:anyAttribute
|
0..*
|
Additional
attributes of the resulting property.
|
4.2.4.2 ResultingPropertyType Property Usage Notes
§ PropertyName:
The PropertyName MAY be used to provide additional identification for
the resource in the deployment environment.
The PropertyName MAY be used to declare a
configuration change to a resource.
§ Value:
Evaluation of the Value expression provides the value of the resulting property.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
The package descriptor defines package content that includes
artifacts whose processing results in deployment of the software package. The deployment
descriptor defines metadata associated with those artifacts. The metadata
includes conditions, requirements, results, inputs, outputs and completion
actions. Metadata throughout the deployment descriptor is associated with
package content in the definition of atomic content elements. The atomic content
elements are InstallableUnit, ConfigurationUnit and LocalizationUnit.
These are the only content elements that define Artifacts elements.
Artifact elements identify an artifact file or set of
files defined in package content whose processing will perform all or a portion
of the deployment for a particular deployment lifecycle operation. The name of
the artifact element indicates the operation supported by the artifact. Names
of the artifact elements are created by prefixing “Artifacts” with the
operation name. The artifacts defined for use in the SDD are InstallArtifact,
UpdateArtifact, UndoArtifact, UninstallArtifact, RepairArtifact
and ConfigArtifact.
Artifact elements define the inputs and outputs,
substitution values and types associated with the artifact files. The content
element’s target resource, identified by targetResourceRef, processes
the artifact files with the defined inputs to perform deployment operations.
Examples of artifact types include zip files, rpm files and executable install
files. Artifact types are not defined by this specification. The artifact types
defined in the SDD need to be understood by software that processes the SDD.
There MAY be multiple atomic content elements within a
composite installable that describe the deployment of multiple resources as
part of a single software deployment or there MAY be a single atomic content
element (singleton) in the deployment descriptor that describes the entirety of
a simple deployment. When an atomic content element is used in a CompositeInstallable,
it MUST define exactly one artifact. When an atomic content element is a
singleton, it MUST define at least one artifact element and MAY define one of each
type of artifact element allowed for its type. The inclusion of an artifact
element in a singleton atomic content element implies support for the
associated operation.
For example, a singleton ConfigurationUnit that
defines a ConfigArtifact associates a configure operation with the ConfigArtifact.
Similarly, an SDD with a singleton InstallableUnit that defines an InstallArtifact
and an UpdateArtifact associates an install operation with the InstallArtifact
and an update operation with the UpdateArtifact.
When an atomic content element is defined within a CompositeInstallable
hierarchy, its one artifact MUST support the single top level operation
associated with the CompositeInstallable. The single artifact defined need
not be an artifact for the operation defined for the CompositeInstallable.
For example, in a CompositeInstallable that defines
metadata for an update operation, there may be one InstallableUnit
that defines an InstallArtifact element and another InstallableUnit
that defines an UpdateArtifact element. Both of these artifacts are used
when performing the overall update operation defined for the CompositeInstallable.
Figure 19: InstallableUnitType structure.
The InstallableUnit element is an atomic content
element that defines artifacts that install or update software and defines requirements
for applying those artifacts. It may also define artifacts that undo an update
or that uninstall or repair existing software.
|
Name
|
Type
|
*
|
Description
|
|
Identity
|
IdentityType
|
0..1
|
Human-understandable
identity information about the InstallableUnit.
|
|
Condition
|
ConditionType
|
0..1
|
A
condition that determines if the content element is relevant to a particular
deployment.
|
|
Variables
|
VariablesType
|
0..1
|
Variables
for use within the InstallableUnit’s requirements and artifact definitions.
|
|
RequiredBase
|
RequiredBaseType
|
0..1
|
A
resource that will be updated when the InstallableUnit’s UpdateArtifact is
processed.
|
|
Requirements
|
RequirementsType
|
0..1
|
Requirements
that must be met prior to successful processing of the InstallableUnit’s
artifacts.
|
|
Languages
|
LanguagesType
|
0..1
|
Languages
supported by the InstallableUnit.
|
|
Completion
|
CompletionType
|
0..*
|
Describes
completion actions such as restart and the conditions under which the action
is applied.
|
|
ResultingResource
|
ResultingResourceType
|
0..*
|
A
resource that will be installed or updated by processing the
InstallableUnit’s artifacts.
|
|
ResultingChange
|
ResultingChangeType
|
0..*
|
A
resource that will be configured by processing the InstallableUnit’s
artifacts.
|
|
Artifacts
|
InstallationArtifactsType
|
1
|
The
set of artifacts associated with the InstallableUnit.
|
|
|
xsd:any
|
0..*
|
|
|
id
|
xsd:ID
|
1
|
An identifier
for the InstallableUnit scoped to the deployment descriptor.
|
|
targetResourceRef
|
xsd:IDREF
|
1
|
Reference
to the resource that can process the InstallableUnit’s artifacts.
|
|
|
xsd:anyAttribute
|
0..*
|
|
§ Identity: The InstallableUnit’s
Identity element defines human-understandable information that reflects
the identity of the solution as understood by the end user of the solution.
If the InstallableUnit
defines a resulting resource, the Identity of the InstallableUnit
SHOULD reflect the identity of the resulting resource.
When the InstallableUnit is
the only content element in the deployment descriptor, its Identity MAY define
values that are the same as the corresponding PackageIdentity element
values.
This would be useful, for example, in a case where
the package is known by the same name as the resource created by the InstallableUnit.
See the IdentityType
section for structure and additional usage details [3.4].
§ Condition: A Condition
is used when the InstallableUnit’s content should be deployed only when
certain conditions exist in the deployment environment.
For example, one InstallableUnit may be
applicable only when the operating system resource is resolved to a Linux®
operating system during deployment. The InstallableUnit would define a Condition
stating that the type of the operating system must be Linux for the InstallableUnit
to be considered in scope for a particular deployment.
See the ConditionType
section for structure and additional usage details [4.5.1].
§ Variables: An
InstallableUnit’s Variables element defines variables that are used in the
definition of the InstallableUnit’s requirements and in parameters and
properties passed to the InstallableUnit’s target resource.
When the deployment descriptor
defines a single InstallableUnit at the top level, that is, not inside a
CompositeInstallable, the variables it defines MAY be referred to by any
element under Topology.
See the VariablesType
section for structure and additional usage details [4.6.3].
§ Languages:
When translated materials are deployed by the InstallableUnit’s
artifacts, the languages of the translations are listed in Languages.
See the LanguagesType section for structure and
additional usage details [4.13.6].
§ RequiredBase: When
an InstallableUnit can be used to update resources, the RequiredBase
element identifies the resources that can be updated.
See the RequiredBaseType
section for structure and additional usage details [4.7.8].
§ Requirements: Requirements
specified in an InstallableUnit identify requirements that must be met
prior to successful processing of the InstallableUnit’s artifacts.
See the RequirementsType
section for structure and additional usage details [4.7.1].
§ Completion: A Completion
element MUST be included if the artifact being processed requires a system
operation such as a reboot or logoff to occur to function successfully after
deployment or if the artifact executes a system operation to complete
deployment of the contents of the artifact.
There MUST be an artifact associated with the
operation defined by a Completion element.
For example, if there is a Completion element
for the install operation, the InstallableUnit must define an InstallArtifact.
See the CompletionType
section for structure and additional usage details [4.3.14].
§ ResultingResource:
An InstallableUnit’s ResultingResource element identifies the
resources in Topology that will be installed or updated when the InstallableUnit’s
artifacts are processed.
See the ResultingResourceType
section for structure and additional usage details [4.8.1].
§ ResultingChange:
Multiple content elements within the SDD MAY specify the same resource in their
ResultingChange elements. In this case each content element is capable
of modifying the configuration of that resource.
An example use of the ResultingChange element
is to understand whether or not one content element can satisfy the
requirements specified in another content element.
See the ResultingChangeType
section for structure and additional usage details [4.8.2].
§ Artifacts: When
the InstallableUnit is a singleton defined outside of a CompositeInstallable,
it MUST define at least one artifact element and MAY define one of each type of
artifact element allowed for its type. The inclusion of an artifact element in
a singleton InstallableUnit implies support for the associated operation.
When the InstallableUnit is defined within a CompositeInstallable,
it MUST define exactly one artifact. The artifact defined MAY be any artifact
allowed in an InstallableUnit and it MUST support the single top level
operation defined by the CompositeInstallable. This does not mean the
operation associated with the artifact has to be the same as the one defined by
the CompositeInstallable.
For example, an update of a resource may be required
to support an install of the overall solution, in which case the InstallableUnit
would define an UpdateArtifact to support the top level install
operation.
See the InstallationArtifactsType section for
structure and additional usage details [4.3.4].
§ id: The id attribute
is referenced in features to identify an InstallableUnit selected by the
feature and Dependency elements to indicate a dependency on processing
of the content element.
The id attribute may be useful to software that
processes the SDD, for example, for use in creating log and trace messages.
§ targetResourceRef:
The targetResourceRef attribute identifies the resource that will
process the InstallableUnit’s artifacts.
The resources created or
modified by artifact processing are frequently, but not necessarily, hosted by
the target resource.
This value MUST match an id
of a resource element in Topology.
The target may be a resource
that has not yet been created. In this case, there is a dependency on the
complete installation of the target resource prior to applying the InstallableUnit.
This dependency MUST be represented in a Dependency element within Requirements
that apply to the InstallableUnit.
Figure 20: ConfigurationUnitType structure.
The ConfigurationUnit element defines artifacts that
configure one or more existing resources. It also defines the requirements for
applying those artifacts. It MUST NOT install, update, or uninstall resources.
|
Name
|
Type
|
*
|
Description
|
|
Identity
|
IdentityType
|
0..1
|
Human-understandable
identity information about the ConfigurationUnit.
|
|
Condition
|
ConditionType
|
0..1
|
A
condition that determines if the content element is relevant to a particular
deployment.
|
|
Variables
|
VariablesType
|
0..1
|
Variables
for use within the ConfigurationUnit’s requirement and artifact definitions.
|
|
Requirements
|
RequirementsType
|
0..1
|
Requirements
that must be met prior to successful processing of the ConfigurationUnit’s
artifacts.
|
|
Completion
|
CompletionType
|
0..*
|
Describes
completion actions such as restart and the conditions under which the action
is applied.
|
|
ResultingChange
|
ResultingChangeType
|
0..*
|
A definition
of changes made to a resource that is configured by processing the
ConfigurationUnit’s ConfigArtifact.
|
|
Artifacts
|
ConfigurationArtifactsType
|
1
|
The
artifact associated with the ConfigurationUnit.
|
|
|
xsd:any
|
0..*
|
|
|
id
|
xsd:ID
|
1
|
An identifier
for the ConfigurationUnit scoped to the deployment descriptor.
|
|
targetResourceRef
|
xsd:IDREF
|
1
|
Reference
to the resource that can process the ConfigurationUnit’s artifacts.
|
|
|
xsd:anyAttribute
|
0..*
|
|
§ Identity: The ConfigurationUnit’s
Identity element defines human-understandable information that reflects
the identity of the provided configuration as understood by the end user of the
solution. Identity has elements that are common with elements in the
corresponding PackageDescriptor’s PackageIdentity element, for
example, Name and Version. The values of these common elements
SHOULD be the same as the corresponding PackageIdentity element values.
See the IdentityType section for structure and
additional usage details [3.4].
§ Condition: A Condition
is used when the deployment of configuration content is dependent on the
existence of certain conditions in the deployment environment.
For example, a package that has one configuration
artifact that creates a database table for one database product and a different
artifact that creates a table for a different database product would have two
configuration units, each with a condition on the associated database product.
See the ConditionType section for structure and
additional usage details [4.5.1].
§ Variables: A
ConfigurationUnit’s Variables element defines variables that are used in the
definition of requirements and artifact parameters.
When the deployment descriptor
defines a single ConfigurationUnit at the top level, that is, not inside
a CompositeInstallable, the variables it defines MAY be referred to by any
element under Topology.
See the VariablesType section for structure and
additional usage details [4.6.3].
§ Requirements: Requirements
specified in a ConfigurationUnit identify requirements that MUST be met
prior to successful processing of the ConfigurationUnit’s artifacts.
See the RequirementsType section for structure
and additional usage details [4.7.1].
§ Completion: A Completion
element MUST be included if the artifact being processed requires a system
operation such as a reboot or logoff to occur to function successfully after
deployment or if the artifact executes a system operation to complete
deployment of the contents of the artifact.
There MUST be an artifact associated with the
operation defined by a Completion element.
For example, if there is a Completion element
for the configure operation, the ConfigurationUnit must define a ConfigArtifact.
See the CompletionType section for the structure
and additional usage details [4.3.14].
§ ResultingChange:
Configuration changes made when the configuration artifact is processed SHOULD be
declared here. This information may be necessary when the SDD is aggregated
into another SDD and the resulting change satisfies a constraint in the
aggregation. The information declared here can be compared with resource
constraints to determine if application of the ConfigurationUnit will
satisfy the constraint.
See the ResultingChangeType
section for structure and additional usage details [4.8.2].
§ Artifacts: When
the ConfigurationUnit is a singleton defined outside of a CompositeInstallable,
it MUST define at least one artifact element. The inclusion of an artifact
element in a singleton ConfigurationUnit implies support for the
associated operation.
When the ConfigurationUnit is defined within a CompositeInstallable,
it MUST define exactly one artifact. The artifact defined MUST be a ConfigArtifact
and it MUST support the single top level operation defined by the CompositeInstallable.
See the ConfigurationArtifactsType section for
structure and additional usage details [4.3.5].
§ id: The id
attribute may be useful to software that processes the SDD, for example, for
use in creating log and trace messages.
§ targetResourceRef:
The targetResourceRef attribute identifies the resource in Topology
that will process the ConfigurationUnit’s artifacts to configure the
resources identified by the ConfigurationUnit’s ResultingChange
definition.
This value MUST match an id
of a resource element in Topology.
Figure 21: ArtifactType structure.
ArtifactType elements define the files, arguments and
other information required to perform a particular deployment operation. Every
artifact that can be defined in a content element is an instance of ArtifactType.
These are InstallArtifact, UpdateArtifact, UndoArtifact, UninstallArtifact, RepairArtifact
and ConfigArtifact.
4.3.3.1 ArtifactType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Arguments
|
ArgumentListType
|
0..1
|
Arguments
used during processing of the artifact.
|
|
OutputVariables
|
OutputVariableListType
|
0..1
|
Variables
whose values are set during processing of the artifact.
|
|
AdditionalContent
|
AdditionalContentType
|
0..*
|
Additional
content files that are part of the artifact.
|
|
|
xsd:any
|
0..*
|
|
|
contentRef
|
xsd:token
|
0..1
|
The
primary artifact file. Not used if resourceRef is used.
|
|
resourceRef
|
xsd:IDREF
|
0..1
|
The
resulting resource representing the artifact file. Not used if contentRef is
used.
|
|
type
|
ArtifactTypeNameType
|
0..1
|
Type
of the primary artifact file.
|
|
weight
|
xsd:positiveInteger
|
0..1
|
The
time required to process this artifact relative to all other artifacts in the
SDD.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.3.3.2 ArtifactType Property Usage Notes
§ Arguments:
Inputs to the processing of the artifact MUST be specified by defining an Arguments
element. All required inputs MUST be included in the arguments list. There are
no implied arguments.
For example, there is no implication that the
selected required resource instances will be passed with an InstallArtifact
on the install operation. If knowledge of those selections is required,
instance identifiers should be passed as arguments.
When one Argument refers to the OutputVariable
of another artifact, the output value must be available at the time of
processing the dependent artifact.
For example, an artifact in a content element that is
conditioned on the operating system being Linux should not refer to the output
of an artifact in a content element conditioned on the operating system being
Windows™.
A Dependency requirement MUST be defined
between the content elements to indicate that the artifact that defines the
output variable is a pre-requisite of the content element with the dependent
artifact.
See the ArgumentListType section for structure
and additional usage details [4.3.8].
§ OutputVariables:
OutputVariables are variables whose values are set by artifact
processing.
OutputVariables can also be useful in log and
trace messages.
See the OutputVariableListType section for
structure and additional usage details [4.3.10].
§ AdditionalContent:
AdditionalContent elements MUST be defined when supporting files are
needed by the artifact for this operation. The content file reference is
specified via the contentRef attribute of AdditionalContent.
See the AdditionalContentType section for
structure and additional usage details [4.3.12].
§ contentRef:
The value MUST be a reference to the id of the primary artifact file
defined in a Content element in the package descriptor.
Note that it is valid to have no artifact file and
drive the operation from arguments alone.
When more than one artifact file is needed, contentRef
points to the primary artifact file and AdditionalContent.contentRef
points to any other files used during application of the content element.
When resourceRef is
defined, contentRef MUST NOT be defined.
§ resourceRef:
Sometimes, artifact files are created during a deployment rather than being contained
in the package.
For example, some install programs create an
uninstall program when the software is deployed. The uninstall program is the
artifact file that is needed by the UninstallArtifact, but is created
by, but not contained in, the package. In this case, the created artifact file
is represented as a ResultingResource.
An Artifact element that defines resourceRef
identifies the resulting resource as its artifact file.
When contentRef is defined, resourceRef
MUST NOT be defined.
The value MUST reference the id
of a resource element in Topology.
§ type: The type
attribute identifies the format of the artifact file or files. When there is no
artifact file identified, type MAY be left undefined. If there is an
artifact file or additional files defined, type MUST be defined.
Values for this attribute are
not defined by this specification. ArtifactTypeNameType restricts type
to valid xsd:QNames.
§ weight: Defining
weights for all artifacts and referenced packages in an SDD provides useful
information to software that manages deployment. The weight of the artifact
refers to the relative time taken to deploy the artifact with respect to other artifacts
and referenced packages in this SDD.
For example, if the artifact takes three times as
long to deploy as another artifact whose weight is “2”, then the weight would
be “6”. The weight numbers have no meaning in isolation and do not describe
actual time elapsed. They simply provide an estimate of relative time.
Figure 22: InstallationArtifactsType structure.
InstallationArtifactsType provides the type
definition for the Artifacts element of InstallableUnit and LocalizationUnit.
At least one Artifact element MUST be defined. Within a CompositeInstallable
definition, exactly one Artifact element MUST be defined.
4.3.4.1 InstallationArtifactsType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
InstallArtifact
|
ArtifactType
|
0..1
|
Artifact
for install operation.
|
|
UpdateArtifact
|
ArtifactType
|
0..1
|
Artifact
for update operation.
|
|
UndoArtifact
|
ArtifactType
|
0..1
|
Artifact
for undo operation.
|
|
UninstallArtifact
|
ArtifactType
|
0..1
|
Artifact
for uninstall operation.
|
|
RepairArtifact
|
ArtifactType
|
0..1
|
Artifact
for repair operation.
|
|
|
xsd:any
|
0..*
|
|
4.3.4.2 InstallationArtifactsType Property Usage Notes
§ InstallArtifact:
The InstallArtifact element declares deployment information sufficient
to enable the target resource to perform an install using the named artifact
files. The ResultingResource and ResultingChange elements
describe the characteristics of the new or modified resource(s).
See the ArtifactType section for structure and
additional usage details [4.3.3].
§ UpdateArtifact:
The UpdateArtifact element declares deployment information sufficient to
enable the target resource to perform an update using the named artifact files.
The RequiredBase element defines the resource(s) that can be updated.
The ResultingResource and ResultingChange elements describe the
updated characteristics of the resource(s).
See the ArtifactType section for structure and
additional usage details [4.3.3].
§ UndoArtifact:
The UndoArtifact element declares deployment information sufficient to
enable the target resource to undo an update. This undo will put the resource
back to a previous level.
The update that can be undone is
described in the RequiredBase element. The ResultingResource
definition can be used to describe the state of the resource(s) after the undo
completes.
See the ArtifactType section for structure and
additional usage details [4.3.3].
§ UninstallArtifact:
The UninstallArtifact element declares deployment information sufficient
to enable the target resource to perform an uninstall.
If an InstallArtifact is
defined in the same InstallableUnit, the ResultingResource
element defines the resource(s) that will be uninstalled.
When an UninstallArtifact
is the only artifact defined for an InstallableUnit, the RequiredBase
MUST be defined to declare the resource(s) that will be uninstalled. The ResultingResource
element MUST be left blank because the result of the uninstall is that the
resource(s) are removed.
See the ArtifactType section for structure and
additional usage details [4.3.3].
§ RepairArtifact:
The RepairArtifact element declares deployment information sufficient to
enable the target resource to repair an installation.
If an InstallArtifact is defined in the same InstallableUnit,
the ResultingResource element defines the resource(s) that will be repaired.
When a RepairArtifact is the only artifact
defined for an InstallableUnit, the RequiredBase MUST be defined to
declare the resource(s) that will be repaired.
See the ArtifactType section for structure and
additional usage details [4.3.3].
Figure 23: ConfigurationArtifactsType structure.
ConfigurationArtifactsType provides the type
definition for the Artifacts element of ConfigurationUnit.
4.3.5.1 ConfigurationArtifactsType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
ConfigArtifact
|
ArtifactType
|
0..1
|
Artifact
for configure operation.
|
|
|
xsd:any
|
0..*
|
|
4.3.5.2 ConfigurationArtifactsType Property Usage Notes
§ ConfigArtifact:
The ConfigArtifact element declares deployment information sufficient to
allow the target resource to configure the resources identified in the content
element’s ResultingChange elements.
See the ArtifactType section for structure and
additional usage details [4.3.3].
This simple type extends the xsd:list
type as defined in [XSD], and
adds the restriction that each value in the list must be one of the operations
from the enumeration defined by OperationType [4.3.7].
4.3.7
OperationType
Operations are used in the SDD to associate requirements and
completion actions with particular artifacts.
For example, when a requirement defines an operation
attribute with value undo, it is a statement that the requirement must
be met prior to processing of the undo artifact.
OperationType enumerates the basic resource lifecycle
operations that use the content and information defined in the SDD to change
the state of the resources being installed, updated, or configured.
4.3.7.1 OperationType Property Usage Notes
Elements and attributes of OperationType MUST be set
to one of the following values:
§ configure:
Uses the ConfigArtifact to perform configuration actions on a resource.
§ install: Uses
the InstallArtifact to install resources.
§ repair: Uses
the RepairArtifact to repair an installation.
§ undo: Uses the
UndoArtifact to restore a resource to the state before the most recent
update was applied.
§ update: Uses
the UpdateArtifact to update an existing instance of a resource, as
specified by the required base.
§ use:
Associates a requirement or completion action with use of the deployed software
resources. Setting the operation attribute to use indicates that the
requirement or completion action is not associated with an artifact.
§ uninstall:
Uses the UninstallArtifact to uninstall a resource.
Figure 24: ArgumentListType structure.
Each artifact MAY optionally include an Arguments
element whose type is provided by ArgumentListType. This simply defines
a list of Argument elements.
4.3.8.1 ArgumentListType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Argument
|
ArgumentType
|
1..*
|
An
input to artifact processing.
|
4.3.8.2 ArgumentListType Property Usage Notes
§ Argument: An
argument value is a variable expression used to define a fixed value for the
argument or to define a value in terms of one of the variables visible to the
artifact.
See the ArgumentType section for structure and
additional usage details [4.3.9].
Figure 25: ArgumentType structure.
ArgumentType provides the type definition for Argument
elements in artifacts [4.3.3]. This complex type is used to declare the
argument name and optionally include a value for that argument.
4.3.9.1 ArgumentType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
name
|
VariableExpressionType
|
1
|
The argument
name.
|
|
value
|
VariableExpressionType
|
0..1
|
The argument
value.
|
|
required
|
xsd:boolean
|
0..1
|
Indicates that the argument value must result in a valid
expression for each particular deployment.
**default
value=“true”
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.3.9.2 ArgumentType Property Usage Notes
§ name:
Evaluation of the name expression produces the name of the argument.
This can be useful for arguments with only a name, for example, those that are
not name-value pairs.
When the argument name alone is
sufficient to communicate its meaning, the argument value SHOULD be omitted.
See the VariableExpressionType
section for structure and additional usage details [4.6.1].
§ value:
Evaluation of the value expression provides the value of the argument.
The variable expression MAY be
used to define a fixed value for the argument or to define a value in terms of
one of the variables visible to the artifact.
See the VariableExpressionType
section for structure and additional usage details [4.6.1].
§ required: In
cases where the argument should be ignored when the value expression is not
valid for a particular deployment, set required to "false".
Figure 26: OutputVariableListType structure.
An artifact can
set variables. The variables set by the artifact are defined in the artifact’s OutputVariables.
4.3.10.1 OutputVariableListType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
OutputVariable
|
OutputVariableType
|
1..*
|
An
output from artifact processing.
|
4.3.10.2 OutputVariableListType Property Usage Notes
§ OutputVariable:
This is the definition of the variable, not a reference to a variable defined
elsewhere.
See the OutputVariableType section for
structure and additional usage details [4.3.11].
Figure 27: OutputVariableType structure.
Output variables
are variables whose value is set by artifact processing. OutputVariableType
extends BaseVariableType and so has all of the attributes defined there,
including an id attribute that is used to refer to the output variable
within the SDD. Output variables can be useful in log and trace messages.
4.3.11.1 OutputVariableType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
|
[extends]
BaseVariableType
|
|
See
the BaseVariableType section for additional properties [4.6.2].
|
|
outputParameterName
|
xsd:NCName
|
0..1
|
An
output from artifact processing.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.3.11.2 OutputVariableType Property Usage Notes
See the BaseVariableType section for details of the
inherited attributes and elements [4.6.2].
§ outputParameterName:
This is the name of the output variable as understood within the artifact
processing environment. The output value is associated with the output
variable’s id. The SDD author uses this id within the SDD to
refer to this output value.
Figure 28: AdditionalContentType structure.
When artifact processing requires more than a single file,
the artifact declaration includes information about the additional files
needed. AdditionalContentType provides the type definition. Additional
content MAY include input files that need to be edited to include values
received as input to a particular solution deployment. In this case, the
additional file can include a Substitution element.
4.3.12.1 AdditionalContentType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Substitution
|
SubstitutionType
|
0..*
|
A
value to substitute into the file.
|
|
|
xsd:any
|
0..*
|
|
|
contentRef
|
xsd:token
|
1
|
A
reference to the content element’s id defined in the package descriptor.
|
|
type
|
ArtifactTypeNameType
|
0..1
|
Type
of the additional artifact file.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.3.12.2 AdditionalContentType Property Usage Notes
§ Substitution:
The Substitution element supports the use of files that require some
editing before they can be used in artifact processing. The definitions in this
element support placement of values determined during a particular deployment
into the file identified by the contentRef attribute.
See the SubstitutionType section for structure
and additional usage details [4.3.13].
§ contentRef:
The contentRef attribute points back to the package descriptor for
information about the physical file. This value MUST match an id of a content
element in the package descriptor.
§ type: The type
attribute identifies the format of the additional file. Values for this
attribute are not defined by this specification. ArtifactTypeNameType
restricts values of type to valid xsd:QNames.
Figure 29: SubstitutionType structure.
SubstitutionType provides the type definition for the
Substitution element in AdditionalContent declarations. It
enables declaration of patterns in the file and the values that should replace
the patterns before the file is used in artifact processing.
4.3.13.1 SubstitutionType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Pattern
|
xsd:string
|
1
|
The
search pattern in the file that needs to be substituted.
|
|
Value
|
VariableExpressionType
|
1
|
The
value to be substituted in the file.
|
|
limit
|
xsd:positiveInteger
|
0..1
|
The
number of substitutions that should be made.
|
|
required
|
xsd:boolean
|
0..1
|
Indicates
that substitution's value must result in a valid expression for each
particular deployment.
**default
value=“true”
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.3.13.2 SubstitutionType Property Usage Notes
§ Pattern: This
is the string that will be replaced with the value when found in the file.
§ Value:
Evaluation of the variable expression results in the value that will be
substituted for the pattern.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
§ limit: If limit
is not defined, there is no limit and all instances of the pattern found in the
file will be replaced.
§ required: In
cases where the substitution should be ignored when the value expression is not
valid for a particular deployment, set required to “false”.
Figure 30: CompletionType structure.
For some deployments certain completion actions such as
restart and logoff are required before a deployment operation using a
particular content element can be considered complete. The CompletionType
elements enable the SDD author to indicate either that one of these actions is
required or that one of these actions will be performed by the associated
artifact.
4.3.14.1 CompletionType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
DisplayName
|
DisplayTextType
|
0..1
|
Name
of the completion action.
|
|
Description
|
DisplayTextType
|
0..1
|
Description
of the completion action.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
Short
description of the completion action.
|
|
Condition
|
ConditionType
|
0..1
|
Conditions
that determine when the completion action will be used.
|
|
|
xsd:any
|
0..*
|
|
|
type
|
CompletionTypeNamesType
|
1
|
The
type of the completion action.
|
|
resourceRef
|
xsd:IDREF
|
1
|
The
resource where the completion action will be executed.
|
|
operation
|
OperationListType
|
1
|
Associates
a completion action with the processing of a particular artifact.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.3.14.2 CompletionType Property Usage Notes
§ DisplayName:
This element MAY be used to provide human-understandable information. If used,
it MUST provide a label for the Completion element.
See the DisplayElementGroup section for
structure and additional usage details [4.14.2].
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the Completion element.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DisplayElementGroup
section for structure and additional usage details [4.14.2].
§ Condition: Conditions
specified on resource characteristics determine if the completion action
applies. If the conditions are met, the action applies. If not met, then the
action is not needed. Unmet conditions are not considered a failure. When no
conditions are defined, the action always applies.
See the ConditionType section for structure and
additional usage details [4.5.1].
§ type: This is
the completion action that applies when conditions defined in ResourceConstraint
are met. Allowed values defined in CompletionTypeNameType are:
·
restartRequiredImmediately: A system restart is required
before the deployment operation is considered complete and the artifact
associated with the operation does not perform the restart. The restart MUST
happen before further deployment actions are taken.
·
restartRequiredBeforeUse: A system restart is required
before the deployment operation is considered complete and the artifact
associated with the operation does not perform this action. The restart MUST
happen before the associated resources are used.
·
restartOccurs: The artifact associated with the lifecycle
operation will initiate a system restart.
·
logoffRequired: A logoff and logon to the user account is
required before the deployment operation is considered complete and the
artifact associated with the operation does not perform this action. The logoff
and logon MUST happen before the operation can be considered complete.
§ resourceRef:
This will often be the resource named as the target resource for the defining
content element.
The value MUST reference the id
of a resource element in Topology.
§ operation: A
completion action is associated with the processing of one artifact by setting operation
to the operation associated with that artifact. The element that defines the Completion
MUST also define an artifact associated with the operation defined for the Completion
element.
See the OperationListType section for operation
enumerations and their meaning [4.3.6].
4.4 Constraints
The SDD author needs to communicate constraints on resources
for a variety of purposes.
§ Some constraints must
be met for the requirements of a content element to be met. See the RequirementsType
section [4.7.1].
§ Other constraints
must be met for a resource to serve as the required base for an update. See the
RequiredBaseType section [4.7.8].
§ Still others must be
met for to satisfy a condition that determines the applicability of a content
element or completion action. See the ConditionType section [4.5.1] and the CompletionType section [4.3.14].
The Constraint types described in this section
support identification of resource constraints in these various contexts. These
types are:
§ CapacityConstraint
§ ConsumptionConstraint
§ PropertyConstraint
§ VersionConstraint
§ UniquenessConstraint
§ RelationshipConstraint
All of these constraint types are constraints on a property
of a resource. There are different constraint types because there are distinct
semantics for different types of resource properties. Examples of these varying
semantics include constraints that the property value be:
·
within a certain range;
·
one of a set of values;
·
all of a set of values;
·
equal to a certain value;
·
no more than or no less than a certain value;
·
no more than or no less than a certain value when all constraints
of that type are added together.
In all cases, deployment
software must be able to discover the property’s value to honor the SDD
author’s intent.
Figure 31: CapacityConstraintType structure.
CapacityConstraintType provides the type definition
of the Capacity elements of RequirementResourceConstraintType [4.7.5]. These elements are used to express a requirement on the capacity of a
particular resource property such as memory available from an operating system.
Capacity is shared: multiple capacity constraints expressed on the same
property are evaluated individually without assuming any change to the
available quantity of the property.
4.4.1.1 CapacityConstraintType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Description
|
DisplayTextType
|
0..1
|
A
description of the capacity constraint. Required if ShortDescription is
defined.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
A
short description of the capacity constraint.
|
|
PropertyName
|
xsd:QName
|
1
|
Name
of the constrained property.
|
|
Value
|
CapacityValueType
|
1
|
Bounds
on the value of the constrained property.
|
4.4.1.2 CapacityConstraintType Property Usage Notes
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the capacity constraint on the resource.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DescriptionGroup
section for structure and additional usage details [4.14.1].
§ PropertyName:
This name corresponds to the name of the constrained resource property in the
environment. This name may be specified in profiles [5.3].
§ Value: Value
specifies the bound and optional recommended bound on the resource property
identified in the PropertyName element.
See the CapacityValueType section for structure
and additional usage details [4.4.2].
Figure 32: CapacityValueType structure.
Capacity value is expressed in terms of a minimum or maximum
capacity. CapacityValueType provides the elements that support this
expression. It also supports expression of a recommended minimum or maximum
capacity.
4.4.2.1 CapacityValueType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Minimum
|
VariableExpressionType
|
0..1
|
Minimum
capacity.
|
|
Maximum
|
VariableExpressionType
|
0..1
|
Maximum
capacity.
|
|
MinimumRecommended
|
VariableExpressionType
|
0..1
|
Minimum
recommended capacity.
|
|
MaximumRecommended
|
VariableExpressionType
|
0..1
|
Maximum
recommended capacity.
|
|
unit
|
xsd:string
|
0..1
|
Unit
of measure used to interpret the capacity value.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.4.2.2 CapacityValueType Property Usage Notes
§ Minimum: There
will usually be either a minimum value or a maximum value defined, but not
both. When minimum is specified, the actual value of the capacity property MUST
be equal to or greater than the minimum value.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
§ Maximum: When
specified, the actual value of the capacity property MUST be less than or equal
to the defined maximum.
If Minimum and Maximum are both defined,
Minimum MUST be less than or equal to Maximum.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
§ MinimumRecommended:
The SDD author can indicate a preferred, but not required, minimum by defining
a value for this element.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
§ MaximumRecommended:
The SDD author can indicate a preferred, but not required, maximum by defining
a value for this element.
If MinimumRecommended and MaximumRecommended
are both defined, MinimumRecommended MUST be less than or equal to MaximumRecommended.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
§ unit: Values
for unit SHOULD be well-known units of measure from the International System of
Units [UNIT]. A unit of measure SHOULD be specified for
all properties that are measured in any kind of unit.
Figure 33: ConsumptionConstraintType structure.
ConsumptionConstraintType provides the type
definition of the Consumption elements of RequirementResourceConstraintType
[4.7.5]. These elements are used to express a requirement on the available
quantity of a particular resource property such as disk space on a file system.
ConsumptionConstraints represent exclusive use of the defined quantity
of the resource property. In other words, consumption constraints are additive,
with each consumption constraint specified in the SDD adding to the total
requirement for the specified resource(s). A consumption constraint is assumed
to alter the available quantity such that the portion of the property used to
satisfy one constraint is not available to satisfy another consumption
constraint on the same property.
For example, suppose that the target file system has
80 megabytes available. The application of a content element’s InstallArtifact
results in installation of files that use 5 megabytes of file space. The
application of a second InstallArtifact results in installation of files
that use 2 megabytes of file space. Consumption constraints are additive, so
the total space used for this content element is 7 megabytes, leaving 73 (80–7)
megabytes available on the target file system.
4.4.3.1 ConsumptionConstraintType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Description
|
DisplayTextType
|
0..1
|
A
description of the consumption constraint. Required if ShortDescription is
defined.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
A
short description of the consumption constraint.
|
|
PropertyName
|
xsd:QName
|
1
|
Names
the resource property to test.
|
|
Value
|
ConsumptionConstraintValueType
|
1
|
A
variable expression defining the minimum available quantity.
|
4.4.3.2 ConsumptionConstraintType Property Usage Notes
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the consumption constraint on the resource.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DescriptionGroup
section for structure and additional usage details [4.14.1].
§ PropertyName:
The property name can be used to find the property value in the deployment environment.
This name may be specified in profiles [5.3].
§ Value: The
result of evaluating this variable expression represents the minimum quantity
of the named resource property that MUST be available for successful deployment
of the defining content element’s artifacts. This quantity will be consumed by
application of the associated artifact.
See the ConsumptionConstraintValueType section
for structure and additional usage details [4.4.4].
Figure 34: ConsumptionConstraintValueType structure.
A consumption value is defined using a variable expression. ConsumptionConstraintValueType
provides the variable expression by extending VariableExpressionType.
4.4.4.1 ConsumptionConstraintValueType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
|
[extends]
VariableExpressionType
|
|
See
the VariableExpressionType section for additional properties [4.6.1].
|
|
unit
|
xsd:string
|
0..1
|
Unit
of measure used to interpret the consumption value.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.4.4.2 ConsumptionConstraintValueType Property Usage Notes
See the VariableExpressionType section for details of
the inherited attributes and elements [4.6.1].
§ unit: Values
for unit SHOULD be well-known units of measure from International System of Units [UNIT]. A unit
of measure SHOULD be specified for all properties which are measured in any
kind of unit.
Figure 35: PropertyConstraintType structure.
PropertyConstraintType provides the type definition
of the Property elements of RequirementResourceConstraintType [4.7.5]. It supports definition of a required value or set of acceptable values
for a particular resource property.
4.4.5.1 PropertyConstraintType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Description
|
DisplayTextType
|
0..1
|
A
description of the property constraint. Required if ShortDescription is
defined.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
A
short description of the property constraint.
|
|
PropertyName
|
xsd:QName
|
1
|
Name
of the constrained property.
|
|
Value
|
VariableExpressionType
|
0..1
|
Required
property value.
|
|
ListOfValues
|
PropertyValueListType
|
0..1
|
List
of required property values.
|
4.4.5.2 PropertyConstraintType Property Usage Notes
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the property constraint on the resource.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DescriptionGroup
section for structure and additional usage details [4.14.1].
§ PropertyName:
The property name can be used to find the property value in the deployment
environment. This name may be specified in profiles [5.3].
§ Value: The
result of evaluating this variable expression represents the required value of
the named resource property.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
§ ListOfValues:
A list of required values can be defined in place of a single required value.
See the PropertyValueListType section for
structure and additional usage details [4.4.6].
Figure 36: PropertyValueListType structure.
A property value list is expressed as one or more strings
representing valid values for the property.
4.4.6.1 PropertyValueListType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Value
|
VariableExpressionType
|
1..*
|
A
property value.
|
|
match
|
PropertyMatchType
|
0..1
|
Determines
whether the actual property value must match any or all of the listed values.
**default
value=“any”
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.4.6.2 PropertyValueListType Property Usage Notes
§ Value: The
result of this variable expression represents one possible required value of
the named resource property.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
§ match: The
value or values of the property found in the deployment environment are
compared to the value or values listed in the property constraint. PropertyMatchType
defines two enumerated values: any and all. When match is
set to any, the property constraint is considered met when any one of
the found property values matches any one of the declared property values. When
match is set to all, the constraint is considered met when all of
the declared property values match values found for the property.
Figure 37: VersionConstraintType structure.
VersionConstraintType provides the type definition of
the VersionConstraint elements of RequirementResourceConstraintType
[4.7.5]. A VersionConstraint can define a set of individual versions or
ranges of versions that are supported and a similar set that are certified.
4.4.7.1 VersionConstraintType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Description
|
DisplayTextType
|
0..1
|
A
description of the version constraint. Required if ShortDescription is
defined.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
A
short description of the version constraint.
|
|
Supported
|
VersionConstraintValueType
|
1
|
A
supported version or set of versions.
|
|
Certified
|
VersionConstraintValueType
|
0..1
|
A
subset of the supported versions that are certified as tested.
|
4.4.7.2 VersionConstraintType Property Usage Notes
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the version constraint on the resource.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DescriptionGroup
section for structure and additional usage details [4.14.1].
§ Supported: If
the resource version is in the Supported set, it meets the requirements.
See the VersionConstraintValueType section for
structure and additional usage details [4.4.8].
§ Certified: In
some cases the set of required versions may be different from the set of
versions that are certified by the manufacturer as thoroughly tested.
See the VersionConstraintValueType section for
structure and additional usage details [4.4.8].
Figure 38: VersionConstraintValueType structure.
A version constraint can be specified using any number of
individual version values in combination with any number of version ranges.
4.4.8.1 VersionConstraintValueType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Value
|
VersionValueType
|
0..*
|
A
version value with associated fixes specified.
|
|
Range
|
VersionRangeType
|
0..*
|
A
range of version values with associated fixes specified for each range.
|
4.4.8.2 VersionConstraintValueType Property Usage Notes
§ Value:
Discrete version values can be defined when the set of required versions
includes versions that do not fall within a range. There is no assumption by
this specification that version values are numerically comparable. The method
of comparing version values may be resource-specific.
See the VersionValueType section for structure
and additional usage details [4.4.9].
§ Range: See the
VersionRangeType section for structure and additional usage details [4.4.10].
Figure 39: VersionValueType structure.
A version value includes a version and a list of required
fixes associated with that version.
4.4.9.1 VersionValueType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Version
|
VersionType
|
1
|
An
allowable version value.
|
|
FixName
|
xsd:string
|
0..*
|
The
name of a fix.
|
4.4.9.2 VersionValueType Property Usage Notes
§ Version: A
string containing a single, exact version value. This is compared with the version
value of specific resource instances. Only equal values satisfy this part of
the constraint.
See the VersionType section for structure and
additional usage details [3.10].
§ FixName: Any
number of FixName elements can be defined, identifying fixes that must
be discovered to be applied for the version constraint to be considered met.
Figure 40: VersionRangeType structure.
A VersionRange is specified with a minimum and
maximum version value and a list of required fixes associated with that range.
The method of comparing version strings in a version range is
resource-specific.
4.4.10.1 VersionRangeType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
MinVersion
|
VersionType
|
0..1
|
The
least allowable version value.
|
|
MaxVersion
|
MaxVersionType
|
0..1
|
The
greatest allowable version value.
|
|
FixName
|
xsd:string
|
0..*
|
The
name of a fix.
|
4.4.10.2 VersionRangeType Property Usage Notes
§ MinVersion:
This is the lower bound of a version range. If MinVersion is defined but
MaxVersion is not, there is no upper bound. A version that is equal to MinVersion
is within the defined range.
See the VersionType section for structure and
additional usage details [3.10].
§ MaxVersion:
This is the upper bound of a version range. If MaxVersion is defined but
MinVersion is not, there is no lower bound. A version that is equal to MaxVersion
may be within the defined range depending on the value specified for the inclusive
attribute.
See the MaxVersionType section for structure
and additional usage details [4.4.11].
§ FixName: Any
number of FixNames can be defined identifying fixes that must be found
to be applied for the version constraint is to be considered satisfied. This is
true for all versions within the defined range.
When FixName is defined,
either a MinVersion or a MaxVersion element MUST also be defined.
Figure 41: MaxVersionType structure.
A maximum version can be inclusive or exclusive.
4.4.11.1 MaxVersionType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
|
[extends]
VersionType
|
|
See
the VersionType section for additional properties [3.10].
|
|
inclusive
|
xsd:boolean
|
0..1
|
Indicates
whether the max version value is included in the supported range of versions.
**default
value=“false”
|
|
|
xsd:any
|
0..*
|
|
4.4.11.2 MaxVersionType Property Usage Notes
See the VersionType section for details of the
inherited attributes and elements [3.10].
§ inclusive: The
inclusive attribute allows the SDD author to choose the semantics of
maximum version. Supported ranges are often everything equal to or greater than
the minimum version and up to, but not including, the maximum version.
Sometimes it is more convenient for the range to include the maximum version.
Figure 42: UniquenessConstraintType structure.
A UniquenessConstraint is used to indicate when two
resources defined in topology MUST or MUST NOT resolve to the same resource
instance during a particular deployment. A UniquenessConstraint
indicates that the two resources MUST NOT be the same when it is defined in a ResourceConstraint
element with testValue=“true”. A UniquenessConstraint indicates that the
two resources MUST be the same when defined in a ResourceConstraint with
testValue=“false”.
When no UniquenessConstraint is in scope for a
particular pair of resources, the two resources MAY resolve to the same
resource when their identifying characteristics are the same and when all
in-scope constraints on both resources are satisfied.
The first of the pair of resources is identified in the resourceRef
attribute of the ResourceConstraint element that defines the UniquenessConstraint.
The second of the pair is identified in the distinctResourceRef
attribute of the UniquenessConstraint.
4.4.12.1 UniquenessConstraintType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Description
|
DisplayTextType
|
0..1
|
A
description of the uniqueness constraint, for example what must or must not
be unique and why.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
A
short description of the uniqueness constraint.
|
|
distinctResourceRef
|
xsd:IDREF
|
1
|
One
of the pair of resources referred to by the constraint.
|
4.4.12.2 UniquenessConstraintType Property Usage Notes
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the uniqueness constraint on the resource.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DescriptionGroup
section for structure and additional usage details [4.14.1].
§ distinctResourceRef:
The second resource in the pair of resources.
The value MUST reference the id
of a resource element in Topology.
Figure 43: RelationshipConstraintType structure.
A RelationshipConstraint identifies a particular
relationship between two resources that is constrained in some way by the SDD.
The value of the testValue attribute of the ResourceConstraint
that contains the RelationshipConstraint determines whether the
constraint MUST be satisfied or MUST NOT be satisfied.
The first resource of the pair is defined by the resourceRef
attribute of the ResourceConstraint containing the RelationshipConstraint.
4.4.13.1 RelationshipConstraintType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Description
|
DisplayTextType
|
0..1
|
A
description of the relationship and its purpose in the overall solution.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
A
short description of the relationship.
|
|
Property
|
PropertyType
|
0..*
|
A
property constraint that further constrains the relationship.
|
|
relatedResourceRef
|
xsd:IDREF
|
0..1
|
The
second resource in the relationship.
|
|
type
|
xsd:QName
|
1
|
The
type of the relationship.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.4.13.2 RelationshipConstraintType Property Usage Notes
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the relationship constraint on the resource.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DescriptionGroup
section for structure and additional usage details [4.14.1].
§ Property: This
element MAY be used to provide additional constraints on the relationship.
For example, a connectivity relationship might
specify additional information such as the specific protocol used (for
instance, TCP/IP) and/or particular characteristics of a protocol (for
instance, port number).
See the PropertyType section for structure and
additional usage details [4.2.3].
§ relatedResourceRef:
Naming the second resource is optional. When it is not named, the relationship
constraint is satisfied if the first resource has the defined relationship with
any other resource.
When it is named, the value MUST
reference the id of a resource element in Topology.
§ type: Values
for relationship type are not defined by the SDD specification.
Conditions are expressed on characteristics of resources in
the deployment environment. Conditions are used to indicate when particular
elements of the SDD are applicable, or when they should be ignored. Conditions
are not requirements. Failure to satisfy a condition does not indicate a
failure; it simply means the conditioned element should be ignored. Conditions
are used to:
§
determine if a content element is applicable
§
choose from among values for a variable
§
determine when a feature is applicable
§
determine when a particular result is applicable
§
determine if a particular completion action is necessary.
Because conditions are always based on the characteristics
of resources, they are expressed using resource constraints.
Figure 44: ConditionType structure.
ConditionType allows expression of the particular
resource characteristics that must be true for the condition to be considered
met. These are resource characteristics that may vary from one particular
deployment to another.
For example, one deployment using the SDD might use
one version of an application server and a different deployment might use a
different version. The differences in the version might be great enough to:
·
select among content elements.
For example, one content element has an artifact for
a Web application that works in a particular version and a different content
element has an artifact for a later version of the same Web application.
·
select among variable values.
For example, the default installation path on one
operating system may be different from the default install path on another
operating system.
·
select among completion actions.
For example, a reboot may be required when deploying
on one operating system but not another.
4.5.1.1 ConditionType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
DisplayName
|
DisplayTextType
|
0..1
|
Name
of the condition.
|
|
Description
|
DisplayTextType
|
0..1
|
Description
of the condition.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
Short
description of the condition.
|
|
Alternative
|
AlternativeConditionalType
|
0..*
|
An
alternative set of resource constraints.
|
|
ResourceConstraint
|
ConditionalResourceConstraintType
|
0..*
|
A
set of constraints on one resource.
|
|
|
xsd:any
|
0..*
|
|
|
operation
|
OperationListType
|
0..1
|
The
condition applies only when processing the artifact associated with this
operation.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.5.1.2 ConditionType Property Usage Notes
§ DisplayName: This
element MAY be used to provide human-understandable information. If used, it MUST
provide a label for the condition.
See the DisplayElementGroup section for
structure and additional usage details [4.14.2].
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the condition.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DisplayElementGroup
section for structure and additional usage details [4.14.2].
§ Alternative: When
a condition can be satisfied in multiple ways, two or more Alternative elements
are defined.
As a convenience for tooling that produces SDDs, it is
also possible to define a single Alternative. This is semantically
identical to directly defining ResourceConstraints.
To meet a condition, at least one of the specified Alternatives
must be satisfied.
See the AlternativeConditionalType section for
structure and additional usage details [4.5.2].
§ ResourceConstraint:
When a condition can be satisfied in only one way, constraints MAY be defined
directly under Condition or in a single Alternative element.
Constraints are defined using a sequence of ResourceConstraints.
Every constraint in the sequence must be met for the condition to be met.
See the ConditionalResourceConstraintType
section for structure and additional usage details [4.5.3].
§ operation: In
a singleton atomic content element, a condition MAY be associated with
application of one or more artifacts. The association is made by setting the operation
attribute to the operations associated with those artifacts.
Conditions defined for CompositeInstallable
and for atomic content elements defined within a CompositeInstallable
SHOULD NOT define operation. If the operation is defined for a CompositeInstallable
Condition, it MUST be set to the operation defined in the CompositeInstallable’s
operation attribute. If operation is defined for an atomic
content element’s Condition, it MUST be set to the operation associated
with the single artifact defined by the atomic content element.
When operation is not specified, the condition
applies to the processing of all artifacts.
See the OperationListType section for operation
enumerations and their meaning [4.3.6].
Figure 45: AlternativeConditionalType structure.
When a condition can be met in more than one way,
alternative sets of conditional resource constraints can be defined. AlternativeConditionalType
provides the type definition for these elements.
4.5.2.1 AlternativeConditionalType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
DisplayName
|
DisplayTextType
|
0..1
|
Name
of the alternative.
|
|
Description
|
DisplayTextType
|
0..1
|
Description
for the alternative.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
Short
description of the alternative.
|
|
ResourceConstraint
|
ConditionalResourceConstraintType
|
1..*
|
A
set of constraints on one resource.
|
|
|
xsd:any
|
0..*
|
|
|
id
|
xsd:IDREF
|
1
|
Identifier
for the alternative that is unique within the deployment descriptor.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.5.2.2 AlternativeConditionalType Property Usage Notes
§ DisplayName: This
element MAY be used to provide human-understandable information. If used, it MUST
provide a label for the alternative condition.
See the DisplayElementGroup section for
structure and additional usage details [4.14.2].
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the alternative condition.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DisplayElementGroup
section for structure and additional usage details [4.14.2].
§ ResourceConstraint:
All constraints defined in the individual Alternative MUST be met for
the Alternative condition to evaluate to true.
See the ConditionalResourceConstraintType
section for structure and additional usage details [4.5.3].
§ id: The id
attribute may be useful to software that processes the SDD, for example, for
use in creating log and trace messages.
Figure 46: ConditionalResourceConstraintType structure.
ConditionalResourceConstraintType provides the type
definitions for the ResourceConstraint elements used in conditions. These
constraints do not represent requirements for deployment. They identify the
resource characteristics associated with a condition. Name, version, property
and the existence or absence of the resource can be specified with a resource
constraint used in a condition.
4.5.3.1 ConditionalResourceConstraintType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
DisplayName
|
DisplayTextType
|
0..1
|
Name
of the resource constraint.
|
|
Description
|
DisplayTextType
|
0..1
|
Description
for the resource constraint.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
Short
description of the resource constraint.
|
|
Name
|
VariableExpressionType
|
0..1
|
Name
of the resource constraint.
|
|
VersionConstraint
|
VersionConstraintValueType
|
0..1
|
A
resource version set.
|
|
PropertyConstraint
|
ConditionalPropertyConstraintType
|
0..*
|
A
resource property name and required value.
|
|
UniquenessConstraint
|
UniquenessConstraintType
|
0..*
|
A
required mapping of two resources in the topology to unique instances in the
deployment environment.
|
|
RelationshipConstraint
|
RelationshipConstraintType
|
0..*
|
A
required relationship between the resource identified in the resourceRef and
another resource in the topology.
|
|
|
xsd:any
|
0..*
|
|
|
id
|
xsd:ID
|
1
|
Identifier
for the resource constraint that is unique within the deployment descriptor.
|
|
resourceRef
|
xsd:IDREF
|
1
|
The
resource to which the conditions apply.
|
|
testValue
|
xsd:boolean
|
0..1
|
The
result of evaluating the contained constraints, which will result in the ResourceConstraint
being met.
**default
value=“true”
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.5.3.2 ConditionalResourceConstraintType Property Usage Notes
§ DisplayName:
This element MAY be used to provide human-understandable information. If used,
it MUST provide a label for the resource constraint.
See the DisplayElementGroup section for
structure and additional usage details [4.14.2].
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the resource constraint.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DisplayElementGroup
section for structure and additional usage details [4.14.2].
§ Name: The name
of the resource identified by resourceRef. If the resource name is
defined in topology it SHOULD NOT be defined here. If it is defined in both
places, the one defined in the condition is used when evaluating the condition.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
§ VersionConstraint:
The actual version of the resource MUST be one of the set of versions defined
here for the version condition to be considered met.
See the VersionConstraintValueType section for
structure and additional usage details [4.4.8].
§ PropertyConstraint:
The actual value of the property MUST match the value defined here for the
condition to be considered met.
See the ConditionalPropertyConstraintType
section for structure and additional usage details [4.5.4].
§ UniquenessConstraint:
UniquenessConstraint elements are used in ResourceConstraints to indicate
when two resources defined in topology MUST or MUST NOT resolve to the same
resource instance during a particular deployment.
See the UniquenessConstraintType section for
structure and additional usage details [4.4.12].
§ RelationshipConstraint:
RelationshipConstraint elements are used in ResourceConstraints
to indicate a constraint on a particular relationship between resources.
See the RelationshipConstraintType section for
structure and additional usage details [4.4.13].
§ id: The id
attribute may be useful to software that processes the SDD, for example, for
use in creating log and trace messages.
§ resourceRef:
The version and property constraints defined here all apply to the one resource
specification in topology identified by this attribute.
The value MUST reference the id
of that resource element in Topology.
§ testValue:
When the result of evaluating Name and all of the constraints defined in
the ResourceConstraint matches the value of testValue, the ResourceConstraint
is considered met.
When no name, version or
property constraints are defined, and testValue is “true”, the
constraint is met if the resource exists as defined in topology.
When no name, version or
property constraints are defined, and testValue is “false”, the
constraint is met if the resource, as defined in topology, does not exist.
Figure 47: ConditionalPropertyConstraintType structure.
ConditionalPropertyConstraintType provides the type
definition for a PropertyConstraint included within Alternatives
specified in Condition elements. The ConditionalPropertyConstraintType
is very similar to the PropertyConstraintType; the only difference is
that the Value element defined in the ConditionalPropertyConstraintType
is of type xsd:string which is less
restrictive than the Value element defined in the PropertyConstraintType
which is of VariableExpressionType.
4.5.4.1 ConditionalPropertyConstraintType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Description
|
DisplayTextType
|
0..1
|
A
description of the property constraint. Required if ShortDescription is
defined.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
A
short description of the property constraint.
|
|
PropertyName
|
xsd:QName
|
1
|
Name
of the constrained property.
|
|
Value
|
xsd:string
|
0..1
|
Required
property value.
|
|
ListOfValues
|
PropertyValueListType
|
0..1
|
List
of required property values.
|
4.5.4.2 ConditionalPropertyConstraintType Property Usage Notes
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the PropertyConstraint element.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DescriptionGroup
section for structure and additional usage details [4.14.1].
§ PropertyName:
The property name can be used to find the property value in the deployment
environment. The name may be defined in a profile [5.3].
§ Value: In a
condition, the value used in a property constraint is a string rather than a
variable expression.
§ ListOfValues:
A list of required values can be defined in place of a single required value.
See the PropertyValueListType
section for structure and additional usage details [4.4.6].
Variables provide a means to associate user inputs, resource
property values, fixed strings and values derived from these with input
arguments for artifacts and with constraints on resources.
Figure 48: VariableExpressionType structure.
Variable expressions are used in many places in the SDD.
They allow the value of a variable to be used as all, or part of, the value of
some other SDD element. A variable expression is a string that can include a
reference to a variable. The string is evaluated by replacing all references to
variables with the value of the variable. A variable reference is a variable id
placed inside parentheses preceded by a dollar sign.
For example, the variable expression “C:\Program
Files\$(InstallDirectory)” resolves to “C:\Program Files\Acme Software Product”
if the value of the variable with the id “InstallDirectory” has the value “Acme
Software Product”.
The value of a variable that is replaced into a variable
expression can itself have a variable reference. This reference is resolved
before using the value. This nesting of variable expressions is unlimited. Any
number of variable references can be used in a variable expression. If a
variable expression string does not contain a variable reference, it is used as
is.
A variable is considered defined if it has a value provided,
even if that value is the empty string. A variable expression is considered
valid if it contains no variable references, or if all contained variable
references are defined.
Specifically, a ResourceProperty variable is
undefined when the resource does not participate in the particular deployment
or when the specified property has no value. A Parameter variable is
undefined when it has no default value and has no value provided by the
deployer. A DerivedVariable that uses ConditionalExpression
elements is undefined when none of its conditions evaluates to true, or the
selected condition's value expression is not valid. A DerivedVariable
that uses an unconditioned Expression is undefined when its value expression
is undefined.
To avoid an undefined Parameter variable, default
parameter values may be used. To avoid an undefined ResourceProperty
variable, replace references to the ResourceProperty variable with
references to a DerivedVariable defined to provide a default value in
cases where the ResourceProperty is undefined. This DerivedVariable
would define one expression, conditioned on the resource, that refers to the ResourceProperty
variable and another, low priority, catch-all expression that defines the
desired “default” value. Note that the default value in either of these cases
MAY be an empty string, for example, “”. An empty string acts just like any
other defined variable value. When the provided value of a variable is an empty
string, the variable reference in a variable expression is replaced by an empty
string.
Figure 49: BaseVariableType structure.
BaseVariableType is the base type of the DerivedVariable
and ResourceProperty elements defined by VariablesType [4.6.3]. It provides the id attribute, which is used to reference the variable
in a variable expression.
4.6.2.1 BaseVariableType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Description
|
DisplayTextType
|
0..1
|
Description
of the variable.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
Short
description of the variable.
|
|
id
|
xsd:ID
|
1
|
Identifier
used for referencing the variable within the descriptor.
|
|
sensitive
|
xsd:boolean
|
0..1
|
A
“true” value indicates the variable contains sensitive data.
**default
value=“false”
|
4.6.2.2 BaseVariableType Property Usage Notes
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the variable.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DescriptionGroup
section for structure and additional usage details [4.14.1].
§ id: Variables
may be referenced in deployment descriptor elements of type VariableExpression
within the scope of the variable. The scope of the variable includes the
content element where defined and all nested content elements. Variables
defined in the top level content element are also visible in Topology.
The Variable is referenced by placing the variable id within
parentheses preceded by a dollar sign.
For example, a variable with id value
“InstallLocation” is referenced with the string “$(InstallLocation)”.
The id attribute may be useful to software that
processes the SDD, for example, for use in creating log and trace messages.
§ sensitive: The
sensitive attribute provides an indication of whether the data within a
variable is likely to be considered sensitive. User name and password are
examples of data that may be considered sensitive.
For example, sensitive data typically would
not be displayed in a user interface, written to a log file, stored without
protection, or in any way made visible except to authorized users.
The default value is “false”.
Figure 50: VariablesType structure.
There are three types of variables that can be defined in a content
element: input parameter variables, variables that take the value of a resource
property, and variables whose value is derived from a variable expression.
A variable is in scope for a particular deployment when the
content element that defines the variable is in scope for that deployment.
4.6.3.1 VariablesType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Parameters
|
ParametersType
|
0..*
|
A
list of variables whose values can be supplied as input to the deployment
process.
|
|
ResourceProperty
|
ResourcePropertyType
|
0..*
|
A
variable whose value is set from the value of a resource property.
|
|
DerivedVariable
|
DerivedVariableType
|
0..*
|
A
set of expressions with optional associated conditions. The DerivedVariable’s
value is determined by evaluating the conditions and then setting the
variable value to the result of the top priority expression from the set of
expressions whose conditions evaluate to true.
|
|
|
xsd:any
|
0..*
|
|
4.6.3.2 VariablesType Property Usage Notes
§ Parameters:
See the ParametersType section for structure and additional usage
details [4.6.4].
§ ResourceProperty:
See the ResourcePropertyType section for structure and additional usage
details [4.6.12].
§ DerivedVariable:
See the DerivedVariableType section for structure and additional usage
details [4.6.13].
Figure 51: ParametersType structure.
Parameters are variables whose value is expected to be
received as input to the deployment process. The SDD author can specify
multiple specific types of parameters, including validation rules for the
values of the parameters.
4.6.4.1 ParametersType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
IntegerParameter
|
IntegerParameterType
|
0..*
|
An
integer input parameter.
|
|
StringParameter
|
StringParameterType
|
0..*
|
A
string input parameter.
|
|
BooleanParameter
|
BooleanParameterType
|
0..*
|
A
boolean input parameter.
|
|
URIParameter
|
URIParameterType
|
0..*
|
A
Universal Resource Identifier input parameter.
|
|
|
xsd:any
|
0..*
|
|
4.6.4.2 ParametersType Property Usage Notes
§ IntegerParameter:
See the IntegerParameterType section for structure and additional usage
details [4.6.6].
§ StringParameter:
See the StringParameterType section for structure and additional usage
details [4.6.8].
§ BooleanParameter:
See the BooleanParameterType section for structure and additional usage
details [4.6.10].
§ URIParameter: See
the URIParameterType section for structure and additional usage details
[4.6.11].
Figure 52: BaseParameterType structure.
BaseParameterType provides a default value, along
with other attributes used by all parameter types. It also provides the id
attribute, which is used to reference the parameter in variable expressions.
4.6.5.1 BaseParameterType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
DisplayName
|
DisplayTextType
|
0..1
|
Name
of the parameter.
|
|
Description
|
DisplayTextType
|
0..1
|
Description
of the parameter.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
Short
description of the parameter.
|
|
id
|
xsd:ID
|
1
|
Identifier
used for referencing the variable within the descriptor.
|
|
defaultValue
|
VariableExpressionType
|
0..1
|
Default
value for the parameter.
|
|
sensitive
|
xsd:boolean
|
0..1
|
A
“true” value indicates the variable contains sensitive data.
**default
value=“false”
|
|
required
|
xsd:boolean
|
0..1
|
A
“true” value indicates that a value for the parameter must be provided.
**default
value=“true”
|
|
operation
|
OperationListType
|
0..1
|
The
parameter is used when the specified operation(s) is (are) performed.
|
4.6.5.2 BaseParameterType Property Usage Notes
§ DisplayName: This
element MAY be used to provide human-understandable information. If used, it MUST
provide a label for the parameter.
See the DisplayElementGroup section for
structure and additional usage details [4.14.2].
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the parameter.
These elements may be used to
assist the deployer in understanding the purpose and expected values for the
parameters.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DisplayElementGroup
section for structure and additional usage details [4.14.2].
§ id: Parameters
may be referenced in DeploymentDescriptor elements of type VariableExpression
within the scope of the parameter variable. The scope of the variable includes
the content element where the variable is defined and all nested content
elements. Variables defined in the top level content element are also visible
in Topology. The Variable is referenced by placing the variable id
within parentheses preceded by a dollar sign.
For example, a variable with id value
“InstallLocation” is referenced with the string “$(InstallLocation)”.
The id attribute may be useful to software that
processes the SDD, for example, for use in creating log and trace messages.
§ defaultValue:
The defaultValue is used if no other value is provided as input to the
deployment process.
The value is interpreted based on the type of the
defining parameter.
For example, the defaultValue for a BooleanParameter
must be either “true” or “false”; the defaultValue for a StringParameter
must be a string; etc.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
§ sensitive: The
sensitive attribute provides an indication of whether the data within a
variable is likely to be considered sensitive. User name and password are
examples of data that may be considered sensitive.
For example, sensitive data typically would not
be displayed in a user interface, written to a log file, stored without
protection, or in any way made visible except to authorized users.
§ required: A
“true” value for required indicates that a value for the parameter must
be provided when the parameter is in scope for a particular deployment.
In cases where the parameter
should be ignored when the value expression is not valid for a particular
deployment, set required to "false".
A “false” value for the required attribute has
no effect when defaultValue is set.
§ operation: This
attribute enables unique parameters to be defined per operation. Note that the
use of a parameter for a particular operation is determined by a reference to
the parameter in a variable expression or artifact argument used when performing
that operation. The operation(s) associated with a parameter’s use can be
determined by examining its use in the SDD. The operation attribute
provides a quick way to know which operation(s) will use the parameter without
having to examine the use of the parameter.
All parameters defined within a CompositeInstallable
are associated with the single operation supported by the CompositeInstallalbe.
The operation attribute SHOULD NOT be set in this situation.
See the OperationListType section for operation
enumerations and their meaning [4.3.6].
Figure 53: IntegerParameterType structure.
IntegerParameterType defines upper and lower bounds
that can be used to validate the input received for that parameter.
4.6.6.1 IntegerParameterType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
|
[extends]
BaseParameterType
|
|
See
the BaseParameterType section for additional properties [4.6.5].
|
|
Bounds
|
BoundaryType
|
0..*
|
Specifies
the boundaries for the value of the parameter.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.6.6.2 IntegerParameterType Property Usage Notes
See the BaseParameterType section for details of the
inherited attributes and elements [4.6.5].
§ Bounds: If
there are restrictions on the range of values that are valid for a parameter, those
restrictions MUST be specified in Bounds.
See the BoundaryType section for structure and
additional usage details [4.6.7].
Figure 54: BoundaryType structure.
BoundaryType defines upper and lower bounds that can
be used to validate the input received for that parameter.
4.6.7.1 BoundaryType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
LowerBound
|
VariableExpressionType
|
0..1
|
Lowest
valid value for the parameter.
|
|
UpperBound
|
VariableExpressionType
|
0..1
|
Highest
valid value for the parameter.
|
4.6.7.2 BoundaryType Property Usage Notes
§ LowerBound: This
variable expression MUST resolve to an integer.
If no LowerBound is
specified, no integer value is too low.
A LowerBound of “0” restricts the integer
parameter to positive integer values.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
§ UpperBound: This
variable expression MUST resolve to an integer.
If no UpperBound is
specified, no integer value is too high.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
Figure 55: StringParameterType structure.
StringParameterType supports definition of minimum
and maximum lengths that can be used to validate the input received for the
string parameter. It also supports definition of a list of valid input values.
4.6.8.1 StringParameterType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
|
[extends]
BaseParameterType
|
|
See
the BaseParameterType section for additional properties [4.6.5].
|
|
ValidValue
|
xsd:string
|
0..*
|
A
string representing one valid value for the parameter.
|
|
minLength
|
xsd:positiveInteger
|
0..1
|
Minimum
length of the parameter value.
|
|
maxLength
|
xsd:positiveInteger
|
0..1
|
Maximum
length of the parameter value.
|
|
case
|
StringCaseType
|
0..1
|
The
case of the string–“upper”, “lower” or “mixed”.
**default
value=“mixed”
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.6.8.2 StringParameterType Property Usage Notes
See the BaseParameterType section for details of the
inherited attributes and elements [4.6.5].
§ ValidValue: Any
number of valid values for the parameter can be listed using ValidValue
elements.
When both defaultValue
and one or more ValidValues are specified, defaultValue MUST
match one of the ValidValues.
ValidValues should be in
the correct case as identified in the case attribute.
§ minLength:
When no minimum length is specified, no string is too short, including an empty
string.
§ maxLength:
When no maximum length is specified, no string is too long.
§ case: Used
when the case of the string is restricted. Defaults to mixed if not
defined.
See the StringCaseType
section for enumeration values and their meaning [4.6.9].
StringCaseType defines the enumeration values for
specifying case restrictions on a string parameter.
4.6.9.1 StringCaseType Property Usage Notes
§ lower: The
string MUST be lower case.
§ upper: The
string MUST be upper case.
§ mixed: The
string SHOULD be mixed case.
Figure 56: BooleanParameterType structure.
BooleanParameterType extends BaseParameterType
without adding any additional attributes or elements. When the defaultValue
attribute is defined for a boolean parameter, its value MUST be either “true”
or “false”. See the BaseParameterType section for details of the inherited
attributes and elements [4.6.5].
4.6.10.1 BooleanParameterType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
|
[extends]
BaseParameterType
|
|
See
the BaseParameterType section for additional properties [4.6.5].
|
|
|
xsd:anyAttribute
|
0..*
|
|
Figure 57: URIParameterType structure.
When the default value attribute is specified for a URI
parameter, its value MUST be a valid Uniform Resource Identifier. See the BaseParameterType
section for details of the inherited attributes and elements [4.6.5].
4.6.11.1 URIParameterType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
|
[extends]
BaseParameterType
|
|
See
the BaseParameterType section for additional properties [4.6.5].
|
|
|
xsd:anyAttribute
|
0..*
|
|
Figure 58: ResourcePropertyType structure.
ResourcePropertyType provides the type definition for
the ResourceProperty element of VariablesType [4.6.3]. ResourceProperty is a variable whose value is set from the property of a specific
instance of a resource during a particular solution deployment. All content
elements can define ResourceProperty elements.
4.6.12.1 ResourcePropertyType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
|
[extends]
BaseVariableType
|
|
See
the BaseVariableType section for additional properties [4.6.2].
|
|
resourceRef
|
xsd:IDREF
|
1
|
The
resource in Topology that owns the property.
|
|
propertyName
|
xsd:QName
|
1
|
Name
of the property whose value provides the variable’s values.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.6.12.2 ResourcePropertyType Property Usage Notes
See the BaseVariableType section for details of the
inherited attributes and elements [4.6.2].
§ resourceRef: The
resourceRef attribute MUST identify the resource in Topology that
owns the property and will provide the value for ResourceProperty.
§
propertyName: The propertyName attribute identifies
the name of the resource property whose value is to be used as the value of ResourceProperty.
Figure 59: DerivedVariableType structure.
A DerivedVariable defines a series of expressions
with optional conditions. The value of the variable is determined by evaluating
the boolean conditions and then setting the variable to the result of the top priority
expression from the set of expressions whose conditions evaluate to true. This
restriction does not apply to variables of the same name in different
descriptors. The SDD author MUST create DerivedVariables in a way that
makes the selection of the expression unambiguous.
4.6.13.1 DerivedVariableType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
|
[extends]
BaseVariableType
|
|
See
the BaseVariableType section for additional properties [4.6.2].
|
|
Expression
|
VariableExpressionType
|
1
|
An
expression whose results become the value of the variable.
|
|
ConditionalExpression
|
ConditionalDerivedVariableExpressionType
|
1..*
|
An
expression and an associated condition.
|
4.6.13.2 DerivedVariableType Property Usage Notes
See the BaseVariableType section for details of the
inherited attributes and elements [4.6.2].
§ Expression:
When the DerivedVariable is used to define one variable whose value is
not conditional, the SDD author can include one variable expression defined in
one Expression element.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
§ ConditionalExpression:
When the variable will take one of a number of possible values depending on the
characteristics of the resources that participate in the particular deployment,
then one ConditionalExpression element is defined for each
value-condition pair.
See the ConditionalDerivedVariableExpressionType
section for structure and additional usage details [4.6.14].
Figure 60: ConditionalDerivedVariableExpressionType
structure.
ConditionalDerivedVariableExpressionType is the type
of the ConditionalExpression elements in derived variables. These
elements associate a condition with a variable expression.
4.6.14.1 ConditionalDerivedVariableExpressionType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Condition
|
ConditionType
|
1
|
A
set of resource characteristics that are evaluated to determine if the
associated expression is a candidate for determining the value of the derived
variable.
|
|
Expression
|
VariableExpressionType
|
1
|
Evaluation
of this expression produces a candidate value for the derived variable.
|
|
priority
|
xsd:positiveInteger
|
0..1
|
A
priority used as a tie-breaker when multiple expressions are available to
determine the value of the variable.
**default
value=“1”
|
4.6.14.2 ConditionalDerivedVariableExpressionType Property Usage Notes
§ Condition:
Selection of conditioned expressions is based on the characteristics of one or
more resources that participate in a particular solution deployment. These characteristics
are defined in the Condition element.
See the ConditionType section for structure and
additional usage details [4.5.1].
§ Expression:
The Expression element contains the expressions that evaluate to a
potential value of the DerivedVariable. Only one expression will be
selected for use in a particular solution deployment.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
§ priority: When
multiple conditions evaluate to true for a particular deployment, the expression
chosen is determined by the priority value. A higher priority is
indicated by a lower value. “1” is the highest priority.
Requirements are defined by content elements. A
Requirement consists of resource constraints that the SDD author
states MUST be met prior to successful deployment or use of the software
described by the SDD package. Each Requirement definition lists one or
more deployment lifecycle operations to which the Requirement applies.
When the Requirement is specified in an atomic content element, the
operation associates the Requirement with artifacts within the atomic
content element. (See the OperationType section for the mapping between
operations and artifacts [4.3.7]. Note that the use operation indicates
that the Requirement is associated with running of the software after
deployment and not with content element artifacts.) When the Requirement
is specified in a CompositeUnit or CompositeInstallable, the operation
value MUST either be use or be the same top level operation
as defined in the CompositeInstallable element. When the Requirement is
specified for a ReferencedPackage, the operation associates the Requirement
with a top level operation within the referenced SDD.
All Requirements specified for content elements that
are in scope for a particular deployment MUST be met.
When a Requirement can be satisfied in more than one
way, Alternatives can be defined within a Requirement. A Requirement
is considered met when any one of the Alternatives is satisfied.
Figure 61: RequirementsType structure.
RequirementsType provides the type definition for Requirements
in InstallableUnit and LocalizationUnit elements. It defines a
list of Requirement elements.
4.7.1.1 RequirementsType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Requirement
|
RequirementType
|
1..*
|
A
requirement that must be met prior to processing the defining content
element’s artifacts.
|
4.7.1.2 RequirementsType Property Usage Notes
§ Requirement: The
Requirements element contains a sequence of Requirement elements.
The Requirement elements define requirements that MUST be met prior to
successful processing of the content element’s artifacts.
See the RequirementType section for structure
and additional usage details [4.7.2].
Figure 62: RequirementType structure.
A Requirement either directly defines a single set of
resource constraints that MUST be met or defines one or more alternative sets
of resource constraints, only one of which MUST be met.
When multiple Requirement elements are declared for
the same operation, all MUST be met prior to processing the associated
artifact.
The association is made between a requirement and an
artifact via the operation attribute.
4.7.2.1 RequirementType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
DisplayName
|
DisplayTextType
|
0..1
|
Name
of the requirement.
|
|
Description
|
DisplayTextType
|
0..1
|
Description
of the requirement.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
Short
description of the requirement.
|
|
Alternative
|
AlternativeRequirementType
|
0..*
|
An
alternative that can satisfy the requirement.
|
|
ResourceConstraint
|
RequirementResourceConstraintType
|
0..*
|
A
set of constraints on one resource.
|
|
Dependency
|
InternalDependencyType
|
0..*
|
A
dependency on another content element.
|
|
|
xsd:any
|
0..*
|
|
|
id
|
xsd:ID
|
1
|
Identifier
for requirement scoped to the deployment descriptor.
|
|
operation
|
OperationListType
|
1
|
Requirement
must be met before this operation is performed.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.7.2.2 RequirementType Property Usage Notes
§ DisplayName:
This element MAY be used to provide human-understandable information. If used,
it MUST provide a label for the requirement.
See the DisplayElementGroup section for
structure and additional usage details [4.14.2].
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the requirement.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DisplayElementGroup
section for structure and additional usage details [4.14.2].
§ Alternative:
Alternative elements are used when a requirement can be satisfied in multiple
ways.
As a convenience for tooling that produces SDDs, it is
also possible to define a single Alternative. This is semantically
identical to directly defining ResourceConstraints under Requirements.
To satisfy a requirement, at least one of the
specified alternatives MUST be satisfied.
See the AlternativeRequirementType section for
structure and additional usage details [4.7.3].
§ ResourceConstraint:
When a requirement can be satisfied in only one way, constraints MAY be defined
directly under Requirement or in a single Alternative element.
Constraints are defined using a sequence of ResourceConstraints.
Every constraint in the sequence MUST be met for the requirement to be met.
See the RequirementResourceConstraintType
section for structure and additional usage details [4.7.5].
§ Dependency:
When one content element must be processed before another for any reason, a pre-req
type Dependency MUST be defined. Reasons for a pre-requisite dependency
include the use of an output variable from one artifact as an argument to
another; the deployment of a resource before it is configured; and the
configuration of a resource before deployment of another resource that depends
on it.
See the InternalDependencyType section for
structure and additional usage details [4.7.6].
§ id: The id
attribute may be useful to software that processes the SDD, for example, for
use in creating log and trace messages.
§ operation: A Requirement
is associated with application of one or more operations by setting its operation
attribute value to one of the enumerated values defined in OperationListType
[4.3.6].
If the Requirement is not a pre-requisite for application
of an operation, but rather is required before the resulting resources are
considered usable, then the value SHOULD be set to use. (Note that a
completion action may also be required before a resulting resource is
considered usable. See the CompletionType section [4.3.14].)
The value of operation for a Requirement
defined in an atomic content element MUST be set either to use or to an operation
that is associated with an artifact element defined in the content element’s Artifacts.
The operation value(s) associate the Requirement with one or more
artifact(s).
When the Requirement is specified in a CompositeUnit
or CompositeInstallable, the operation value MUST be set either
to use or be the same top level operation as defined in the CompositeInstallable
element.
There is no default value for operation. The
SDD author must define it explicitly.
See the OperationType section for enumeration
values and their meaning [4.3.7].
Figure 63: AlternativeRequirementType structure.
AlternativeRequirementType provides the type
definition for Alternative elements used within requirements to define
alternative sets of resource constraints that will satisfy the requirement.
4.7.3.1 AlternativeRequirementType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
DisplayName
|
DisplayTextType
|
0..1
|
Name
of the alternative.
|
|
Description
|
DisplayTextType
|
0..1
|
Description
of the alternative.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
Short
description of the alternative.
|
|
ResourceConstraint
|
RequirementResourceConstraintType
|
1..*
|
A
set of requirements on one resource.
|
|
Dependency
|
InternalDependencyType
|
0..*
|
A
dependency on another content element.
|
|
|
xsd:any
|
0..*
|
|
|
id
|
xsd:ID
|
1
|
Identifier
for the alternative scoped to the deployment descriptor.
|
|
priority
|
xsd:positiveInteger
|
0..1
|
Assists
in determining alternative selected when multiple alternatives evaluate to
true.
**default
value=“1”
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.7.3.2 AlternativeRequirementType Property Usage Notes
§ DisplayName:
This element MAY be used to provide human-understandable information. If used,
it MUST provide a label for the alternative requirement.
See the DisplayElementGroup section for
structure and additional usage details [4.14.2].
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the alternative requirement.
The Description element MUST
be defined if the ShortDescription element is defined.
See the DisplayElementGroup
section for structure and additional usage details [4.14.2].
§ ResourceConstraint:
Every ResourceConstraint defined in a single Alternative MUST be
met for the alternative requirement to be considered satisfied.
See the RequirementResourceConstraintType
section for structure and additional usage details [4.7.5].
§ Dependency:
When one content element must be processed before another for any reason, a pre-req
type Dependency MUST be defined. Reasons for a pre-requisite dependency
include the use of an output variable from one artifact as an argument to
another; the deployment of a resource before it is configured; and the
configuration of a resource before deployment of another resource that depends
on it.
See the InternalDependencyType section for
structure and additional usage details [4.7.6].
§ id: The id
attribute may be useful to software that processes the SDD, for example, for
use in creating log and trace messages.
§ priority: If
there are multiple satisfied alternatives during a particular solution
deployment, one of the alternatives must be selected. The priority
attribute communicates the SDD author’s prioritization of the alternatives. A
lower number represents a higher priority with “1” representing the highest
priority. Other inputs may also be used to select an alternative. The criteria
for making this selection are outside of the scope of the SDD.
Figure 64: ResourceConstraintGroup structure.
The elements of ResourceConstraintGroup are used when
defining content element requirements on resources. The ResourceConstraint
element is used to group one or more constraints on a single resource.
4.7.4.1 ResourceConstraintGroup Property Summary
|
Name
|
Type
|
*
|
Description
|
|
CapacityConstraint
|
CapacityConstraintType
|
0..1
|
A
bound on a quantifiable property of a resource.
|
|
ConsumptionConstraint
|
ConsumptionConstraintType
|
0..1
|
A
required quantity of a property of a resource in any state.
|
|
PropertyConstraint
|
PropertyConstraintType
|
0..1
|
A
required value or set of values of a property.
|
|
VersionConstraint
|
VersionConstraintType
|
0..1
|
A
required value or set of values of a version property.
|
|
UniquenessConstraint
|
UniquenessConstraintType
|
0..1
|
A
required mapping of two resources in the topology to unique instances in the
deployment environment.
|
|
RelationshipConstraint
|
RelationshipConstraintType
|
0..1
|
A
required relationship between the resource identified in the resourceRef and
another resource in the topology.
|
|
|
xsd:any
|
0..*
|
|
4.7.4.2 ResourceConstraintGroup Property Usage Notes
§
CapacityConstraint: CapacityConstraint elements are
used in ResourceConstraints to express constraints on the available
capacity of a particular property of a particular resource.
A CapacityConstraint tests a numeric value
representing a bound on a quantifiable property of a resource, such as
processor speed. The test may be for a lower (minimum) or upper (maximum)
bound. This constraint differs from a ConsumptionConstraint in that it
is comparative, not cumulative.
When multiple CapacityConstraint elements are defined
by content elements participating in a particular solution deployment apply to
the same property of the same resource, the most restrictive constraint
applies.
See the CapacityConstraintType section for
structure and additional usage details [4.4.1].
§ ConsumptionConstraint:
ConsumptionConstraint elements are used in ResourceConstraints to
express constraints on the quantity of a particular property of a specific
resource that is available for consumption.
A ConsumptionConstraint defines a required
quantity of a consumable resource property. The ConsumptionConstraint is
cumulative rather than comparative.
An example of a consumable resource property is the
disk space property of a file system resource.
When multiple ConsumptionConstraint elements
are defined for the same resource by content elements participating in a
particular solution deployment, the sum of all the expressed consumption
constraints must be met by the resource.
See the ConsumptionConstraintType section for
structure and additional usage details [4.4.3].
§ PropertyConstraint:
PropertyConstraint elements are used in ResourceConstraints to indicate
that specific resource properties must have a specific value or set of values.
See the PropertyConstraintType section for
structure and additional usage details [4.4.5].
§ VersionConstraint:
VersionConstraint elements are used in ResourceConstraints to
express a constraint on the version of a specific resource.
A VersionConstraint defines a required resource
version or a range of versions. It MAY include a certified version or range of
versions representing a more restrictive set of versions whose use carries a
higher degree of confidence.
Version formats and comparison rules vary greatly. The
SDD does not provide information on how to interpret version strings.
See the VersionConstraintType section for
structure and additional usage details [4.4.7].
§ UniquenessConstraint:
UniquenessConstraint elements are used in ResourceConstraints to indicate
when two resources defined in topology MUST or MUST NOT resolve to the same
resource instance during a particular deployment.
See the UniquenessConstraintType section for
structure and additional usage details [4.4.12].
§ RelationshipConstraint:
RelationshipConstraint elements are used in ResourceConstraints
to indicate a constraint on a particular relationship between resources.
See the RelationshipConstraintType
section for structure and additional usage details [4.4.13].
Figure 65: RequirementResourceConstraintType structure.
ResourceConstraintType provides the Type section for
the ResourceConstraint element in content element Requirements. A
ResourceConstraint is a set of zero or more constraints on one resource.
4.7.5.1 RequirementResourceConstraintType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
DisplayName
|
DisplayTextType
|
0..1
|
Name
for the resource constraint.
|
|
Description
|
DisplayTextType
|
0..1
|
Description
of the resource constraint.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
Short
description of the resource constraint.
|
|
Name
|
VariableExpressionType
|
0..1
|
The
name of the resource.
|
|
CapacityConstraint
|
CapacityConstraintType
|
0..1
|
A
capacity constraint that applies to the resource identified in resourceRef.
|
|
ConsumptionConstraint
|
ConsumptionConstraintType
|
0..1
|
A
consumption constraint that applies to the resource identified in
resourceRef.
|
|
PropertyConstraint
|
PropertyConstraintType
|
0..1
|
A
property constraint that applies to the resource identified in resourceRef.
|
|
VersionConstraint
|
VersionConstraintType
|
0..1
|
A
version constraint that applies to the resource identified in resourceRef.
|
|
UniquenessConstraint
|
UniquenessConstraintType
|
0..1
|
A
required mapping of two resources in the topology to unique instances in the
deployment environment.
|
|
RelationshipConstraint
|
RelationshipConstraintType
|
0..1
|
A
required relationship between the resource identified in the resourceRef and
another resource in the topology.
|
|
|
xsd:any
|
0..*
|
|
|
id
|
xsd:ID
|
1
|
Identifier
for the ResourceConstraint scoped to the deployment descriptor.
|
|
resourceRef
|
xsd:IDREF
|
1
|
Reference
to a resource specification in topology.
|
|
testValue
|
xsd:boolean
|
0..1
|
Indicates
whether the ResourceConstraint must evaluate to true or to false.
**default
value=“true”.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.7.5.2 RequirementResourceConstraintType Property Usage Notes
§ DisplayName:
This element MAY be used to provide human-understandable information. If used, it
MUST provide a label for the resource constraint.
See the DisplayElementGroup section for
structure and additional usage details [4.14.2].
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of the
resource constraint.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DisplayElementGroup
section for structure and additional usage details [4.14.2].
§ Name: This
name is used to identify the resource in the deployment environment. If the
resource identified by resourceRef does not have the name defined here,
then the constraint is not met.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
§ CapacityConstraint,
ConsumptionConstraint, PropertyConstraint, VersionConstraint,
UniquenessConstraint, RelationshipConstraint: See the ResourceConstraintGroup
section for structure and additional usage of the individual constraints [4.7.4].
§ id: The id
attribute may be useful to software that processes the SDD, for example, for
use in creating log and trace messages.
§ resourceRef:
This is the resource to which the constraints apply.
This reference MUST refer to the
id of a resource in Topology.
§ testValue:
When the result of evaluating Name and all of the constraints defined in
the ResourceConstraint matches the value of testValue, the ResourceConstraint
is considered met.
When no Name or
constraints are defined, and testValue is “true”, the constraint is met
if the resource exists as defined in topology.
When no Name or
constraints are defined, and testValue is “false”, the constraint is met
if the resource, as defined in topology, does not exist.
Figure 66: InternalDependencyType structure.
InternalDependencyType provides the type definition
for Dependency elements defined in all types of content elements. Dependency
elements allow the expression of dependence on the application of a particular
operation to a content element defined in the deployment descriptor before
application of a particular operation on the defining content element. The
dependency is associated with an operation on the defining content element by
the operation attribute in the Requirement defining the Dependency
element. The dependency is associated with an operation on the depended on
content element by the contentRefOperation attribute in the Dependency.
There are three types of dependencies: pre-requisites, co-requisites and
ex-requisites.
4.7.6.1 InternalDependencyType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Description
|
DisplayTextType
|
0..1
|
A
human-understandable description of the dependency.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
A short
human-understandable description of the dependency.
|
|
type
|
DependencyType
|
0..1
|
Type
can be “pre-req”, “co-req”, or “ex-req”.
**default
value=“pre-req”
|
|
contentElementRef
|
xsd:IDREF
|
1
|
A
reference to the content element which is depended on.
|
|
contentElementRefOperation
|
OperationListType
|
0..1
|
The
dependency is on application of this operation to the content element
identified in contentRef.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.7.6.2 InternalDependencyType Property Usage Notes
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the dependency.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DescriptionGroup
section for structure and additional usage details [4.14.1].
§ type: See the DependencyType
section for an explanation of the semantics of each of the possible dependency
types [4.7.7].
§ contentElementRef:
The contentElementRef value is the id of the content element that
is depended on.
The value MUST reference the id
of a content element.
§ contentElementRefOperation:
When the depended-on content element is an atomic content element, the
operation defined here effectively identifies the artifact that must be
processed for a pre-requisite or co-requisite or not processed for an
ex-requisite.
When the depended-on content
element is a CompositeUnit, the operation defined in contentElementRefOperation
MUST be the top level operation defined by the containing CompositeInstallable.
See the OperationListType
section for structure and additional usage details [4.3.6].
The DependencyType enumeration provides the value for
the type attribute in Dependency elements.
4.7.7.1 DependencyType Property Usage Notes
§ pre-req: A pre-req
dependency is satisfied if the other content element is in scope for the
deployment. The pre-req indicates that the other content element MUST be
processed before the content element that defines the pre-req.
The dependency is not met if the other content element
is not in scope.
§ co-req: A co-req
dependency is satisfied if the other content element is in scope for the
deployment. There is no dependence on order of processing.
The dependency is not met if the other content element
is not in scope.
§ ex-req: An ex-req
dependency indicates that the other content element MUST NOT be in scope.
The dependency is not met if the other content element
is in scope.
Figure 67: RequiredBaseType structure.
RequiredBaseType provides the type definition for the
RequiredBase element of InstallableUnit and LocalizationUnit
elements and the LocalizationBase element of LocalizationUnits.
These elements declare the identity characteristics of one or more resources
that will be modified or localized by applying of the content element’s
artifacts. Definition of a RequiredBase element represents a requirement
that a resource matching the declared characteristic exists. Definition of a LocalizationBase
element represents a condition on the existence of a resource that matches the
declared characteristics.
4.7.8.1 RequiredBaseType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
DisplayName
|
DisplayTextType
|
0..1
|
Display
name for the requirement on a resource to serve as the base of an update or
localization.
|
|
Description
|
DisplayTextType
|
0..1
|
Description
of the requirement. Required if ShortDescription is defined.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
Short
description of the requirement.
|
|
Alternative
|
AlternativeRequiredBaseConstraintType
|
0..*
|
Alternative
set of constraints on a required base resource.
|
|
ResourceConstraint
|
RequiredBaseConstraintType
|
1..*
|
Constraints
on the required base resource.
|
|
|
xsd:any
|
0..*
|
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.7.8.2 RequiredBaseType Property Usage Notes
§ DisplayName: This
element MAY be used to provide human-understandable information. If used, it MUST
provide a label for the required base element.
See the DisplayElementGroup section for
structure and additional usage details [4.14.2].
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the required base for this content element.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DisplayElementGroup
section for structure and additional usage details [4.14.2].
§ Alternative: When
more than one resource can be used as the update or localization base, two or
more Alternative elements are defined to describe the choices. As a
convenience for tooling that produces SDDs, a single Alternative can be
defined in place of a ResourceConstraint.
See the AlternativeRequiredBaseConstraintType
section for structure and additional usage details [4.7.10].
§ ResourceConstraint:
ResourceConstraints defined here identify one or more particular
resources that can serve as the update or localization base. If ResourceConstraints
are defined for multiple resources, they are all updated or localized by
application of the content element.
See the RequiredBaseConstraintType
section for structure and additional usage details [4.7.9].
Figure 68: RequiredBaseConstraintType structure.
RequiredBaseConstraintType provides the type
definition for the ResourceConstraint elements used in RequiredBase
and LocalizationBase elements. A required base definition differs from a
requirement definition in the limited nature of the constraints that can be
specified. The purpose of constraints within a required base is to identify
resource instances that can be correctly updated or localized by the content
element. Only constraints related to the basic identity characteristics of the
resource are allowed.
4.7.9.1 RequiredBaseConstraintType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
DisplayName
|
DisplayTextType
|
0..1
|
Name
of the constraint.
|
|
Description
|
DisplayTextType
|
0..1
|
Description
of the constraint.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
Short
description of the constraint.
|
|
Name
|
VariableExpressionType
|
0..1
|
Name
of the required base resource as understood in the deployment environment.
|
|
VersionConstraint
|
VersionConstraintType
|
0..1
|
Allowed
versions for the required base resource.
|
|
|
xsd:any
|
0..*
|
|
|
id
|
xsd:ID
|
1
|
Constraint
identifier scoped to the deployment descriptor.
|
|
resourceRef
|
xsd:IDREF
|
1
|
Reference
to the resource representing the required base for an update operation.
|
|
testValue
|
xsd:boolean
|
0..1
|
Defines
the desired result of the required base constraint
**default
value=“true”
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.7.9.2 RequiredBaseConstraintType Property Usage Notes
§ DisplayName: This
element MAY be used to provide human-understandable information. If used, it MUST
provide a label for the constraint.
See the DisplayElementGroup section for
structure and additional usage details [4.14.2].
§ Description,
ShortDescription: These elements MAY be used to provide human-understandable
information. If used, they MUST provide a description of the constraint on the
required base.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DisplayElementGroup
section for structure and additional usage details [4.14.2].
§ Name: The Name
element provides the name by which the resource is known in the deployment
environment. The value of Name is compared to resource names found in
the deployment environment as part of constraint evaluation.
If the resource name is declared in the referenced
resource definition, it SHOULD NOT be declared here. If the resource name is
changed by application of the update, the original name SHOULD be declared here
and the updated name SHOULD be declared in ResultingResource. The name
declared here is always the one that represents the required value for the
required base.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
§ VersionConstraint:
The VersionConstraint element defines the set of versions that can serve
as a base for the update.
See the VersionConstraintType section for
structure and additional usage details [4.4.7].
§ id: The id
attribute may be useful to software that processes the SDD, for example, for
use in creating log and trace messages.
§ resourceRef: The
resourceRef attribute value MUST reference the id of the resource
element in Topology to which this constraint refers.
§ testValue: The
required base constraint is met when the boolean result of comparing the
declared name and/or version to the actual name and/or version is equal to the
boolean value specified in testValue.
Because the purpose of a
required base constraint is to positively identify one or more resources that can
serve as the base for an update or localization, there MUST always be one ResourceConstraint
that has testValue set to “true”.
Additional ResourceConstraints can be defined
with testValue set to “false”. These constraints identify
characteristics of the same required base resource that must not be true for
that resource to serve as the base.
Figure 69: AlternativeRequiredBaseConstraintType structure.
AlternativeRequiredBaseConstraintType provides the
type definition for the Alternative elements used in RequiredBase
and LocalizationBase elements.
4.7.10.1 AlternativeRequiredBaseConstraintType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
DisplayName
|
DisplayTextType
|
0..1
|
Name
of the constraint.
|
|
Description
|
DisplayTextType
|
0..1
|
Description
of the constraint.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
Short
description of the constraint.
|
|
ResourceConstraint
|
RequiredBaseConstraintType
|
1..*
|
A
set of requirements on one resource.
|
|
|
xsd:any
|
0..*
|
|
|
id
|
xsd:ID
|
1
|
Constraint
identifier scoped to the deployment descriptor.
|
|
priority
|
xsd:positiveInteger
|
0..1
|
Assists
in determining alternative selected when multiple alternatives evaluate to
true.
**default
value=“1”
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.7.10.2 AlternativeRequiredBaseConstraintType Property Usage Notes
§ DisplayName: This
element MAY be used to provide human-understandable information. If used, it MUST
provide a label for the alternative.
See the DisplayElementGroup section for
structure and additional usage details [4.14.2].
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the alternative.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DisplayElementGroup
section for structure and additional usage details [4.14.2].
§ ResourceConstraint:
ResourceConstraints defined here identify one or more particular
resources that can serve as the update or localization base. If ResourceConstraints
are defined for multiple resources, they are all updated or localized by
application of the content element.
See the RequiredBaseConstraintType section for
structure and additional usage details [4.7.9].
§ id: The id
attribute may be useful to software that processes the SDD, for example, for
use in creating log and trace messages.
§ priority: If
there are multiple satisfied alternatives during a particular solution
deployment, one of the alternatives must be selected. The priority
attribute communicates the SDD author’s prioritization of the alternatives. A
lower number represents a higher priority with “1” representing the highest
priority. Other inputs may also be used to select an alternative. The criteria
for making this selection are outside of the scope of the SDD.
Deployment of an SDD package creates or modifies software
resources. These resources are included in the Topology definition and
described in more detail in ResultingResource and ResultingChange
elements.
The SDD author can choose to model resulting and modified
resources at a very granular level, at a very coarse level; at any level in
between, or not at all. An example of modeling resulting resources at a
granular level would be modeling every file created by the deployment as a
resulting resource. An example of modeling resulting resources at a very coarse
level would be modeling the software product created by deployment as a single
resulting resource. The choice depends on the needs of the solution deployment.
If a resource is not modeled in the SDD, no requirements can be expressed on
it, no conditions can be based on it and no variables can be set from values of
its properties. It cannot play any of the roles described for resources in the ResourceType
section of this document [4.2.2].
Figure 70: ResultingResourceType structure.
InstallableUnit and LocalizationUnit content
elements can include zero or more ResultingResource elements that describe
the key resources installed or updated when the content element’s artifacts are
processed. The type definition for these elements is provided by ResultingResourceType.
ResultingResource elements refer to resources in topology and define
characteristics of those resources that will become true when the artifact is
applied. The deployment descriptor author MAY omit the ResultingResource
element from the content element and the definition of the resource from Topology
when no knowledge of their existence is required for deployment of the solution
or for aggregation of the solution. Characteristics that exist in ResultingResource
and elsewhere, such as Topology or ResultingChange, MUST NOT
conflict.
For example, if Topology specifies a property
that indicates that a file must be writable, it would be incorrect for ResultingResource
to specify that the resulting file resource is read-only.
Example uses of the ResultingResource element are to:
·
determine whether potentially resulting resources will actually
be installed or updated;
·
identify the resource associated with a content element that may
be subsequently uninstalled using the uninstall information in this SDD;
·
discover the components of a logical solution resource previously
installed using this SDD;
·
check whether or not a content element has already been
installed.
4.8.1.1 ResultingResourceType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Description
|
DisplayTextType
|
0..1
|
Description
of the effect of the content element on the resulting resource.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
Short
description of the effect of the content element on the resulting resource.
|
|
Condition
|
ConditionType
|
0..1
|
A
condition that determines if the resulting resource definition is relevant to
a particular deployment.
|
|
Name
|
VariableExpressionType
|
0..1
|
Name
of the resulting resource as known in the deployment environment.
|
|
Version
|
VersionType
|
0..1
|
Version
of the resulting resource.
|
|
FixName
|
xsd:string
|
0..*
|
Name
of a resulting fix.
|
|
Property
|
ResultingPropertyType
|
0..*
|
A
resulting property setting of the resulting resource.
|
|
Relationship
|
RelationshipType
|
0..*
|
A
relationship that will exist after creating or updating the resource.
|
|
|
xsd:any
|
0..*
|
|
|
resourceRef
|
xsd:IDREF
|
1
|
Reference
to a resource in topology.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.8.1.2 ResultingResourceType Property Usage Notes
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the effect of the content element on the resulting resource.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DescriptionGroup
section for structure and additional usage details [4.14.1].
§ Condition: A Condition
is used when the resulting resource will be created by the content element only
when certain conditions exist in the deployment environment.
See the ConditionType
section for structure and additional usage details [4.5.1].
§ Name: The name
of the resulting resource SHOULD be defined in the ResultingResource
element and not in Topology when the content element installs the
resulting resource. The resource name comes into existence when the resulting
resource is created. When the content element updates the resulting resource without
changing the resource name, Name SHOULD be defined in Topology. Name
SHOULD NOT be defined in both places. If a resource name is defined in both Topology
and ResultingResource, the values MUST match.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
§ Version: This
is the version of the resource after processing the content element’s
artifacts. Version SHOULD be defined for all resulting resources.
For example, when update artifacts are processed,
this version describes the resource after the update is complete.
See the VersionType section for structure and
additional usage details [3.10].
§ FixName:
Multiple FixName elements MAY be included to identify the resulting
resource fixes that will exist once the content element is applied. The FixName
SHOULD match the names of fixes that can be detected on the system.
§ Property: Property
elements SHOULD be included to identify property values of the resulting
resource that will exist after applying the content element.
Properties of the resulting resource SHOULD be defined
in the ResultingResource element and not in Topology. They SHOULD
NOT be defined in both places. If a property is defined in both Topology
and ResultingResource, the values MUST match.
See the ResultingPropertyType section for
structure and additional usage details [4.2.4].
§ Relationship: Relationship
elements SHOULD be included to identify relationships that will exist after
applying the content element.
See the RelationshipType section for structure
and additional usage details [4.8.3].
§ resourceRef:
The resourceRef attribute MUST identify the resource in Topology
that will be installed or updated when the defining content element is applied.
Figure 71: ResultingChangeType structure.
InstallableUnit and ConfigurationUnit content
elements can include zero or more ResultingChange elements that describe
the key resources whose configuration is modified when the content element’s
artifacts are processed. ResultingChange elements refer to resources in Topology
and define characteristics of those resources that will become true when the
content element is applied.
4.8.2.1 ResultingChangeType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Description
|
DisplayTextType
|
0..1
|
Description
of the effect of the content element on the changing resource.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
Short
description of the effect of the content element on the changing resource.
|
|
Condition
|
ConditionType
|
0..1
|
A
condition that determines if the resulting change definition is relevant to a
particular deployment.
|
|
Name
|
VariableExpressionType
|
0..1
|
Name
of the resulting resource as known in the deployment environment.
|
|
Property
|
ResultingPropertyType
|
0..*
|
A
resulting property setting of the changing resource.
|
|
Relationship
|
RelationshipType
|
0..*
|
Specifies
a relationship(s) with another resource that will result from this
deployment.
|
|
|
xsd:any
|
0..*
|
|
|
resourceRef
|
xsd:IDREF
|
1
|
Reference
to the resource in topology that will be changed by application of the
content element.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.8.2.2 ResultingChangeType Property Usage Notes
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the effect of the content element on the changing resource.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DescriptionGroup
section for structure and additional usage details [4.14.1].
§ Condition: A Condition
is used when the resulting change will be performed by applying the content
element only when certain conditions exist in the deployment environment.
See the ConditionType section for structure and
additional usage details [4.5.1].
§ Name: The Name
corresponds with the name of the changed resource as known in the deployment
environment. Name SHOULD be defined in Topology and not in ResultingChange,
because the name is not changed by processing the content elements artifacts.
If Name is defined in both places, the values MUST match.
See the VariableExpressionType
section for structure and additional usage details [4.6.1].
§ Property: Property
elements MAY be included to identify property values of the identified resource
as they will exist after applying the content element.
Properties defined in ResultingChange
MUST be properties that are modified by processing the content element’s
artifacts.
See the ResultingPropertyType
section for structure and additional usage details [4.2.4].
§ Relationship: When
application of the content element results in the creation or modification of
relationships, the Relationship elements SHOULD be included to identify
relationships as they will exist after application of the content element.
See the RelationshipType section for structure
and additional usage details [4.8.3].
§ resourceRef:
The resourceRef attribute MUST identify the resource whose configuration
will be modified when the defining content element is applied.
The value MUST reference the id
of a resource specified in Topology.
Figure 72: RelationshipType structure.
4.8.3.1 RelationshipType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Property
|
PropertyType
|
0..*
|
A
property definition that further constrains the relationship.
|
|
|
xsd:any
|
0..*
|
|
|
relatedResourceRef
|
xsd:IDREF
|
1
|
The
second resource in the relationship.
|
|
type
|
xsd:QName
|
1
|
The
type of the relationship.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.8.3.2 RelationshipType Property Usage Notes
§ Property: This
element MAY be used to provide additional information about the relationship.
For example, a connectivity relationship might
specify additional information such as the specific protocol used (for
instance, TCP/IP) and/or particular characteristics of a protocol (for
instance, port number).
See the PropertyType
section for structure and additional usage details [4.2.3].
§ relatedResourceRef:
There are two resources in any relationship. The first is the resource defined
in the resourceRef of the ResultingResource or RelationshipConstraint
element that defines the Relationship element. The second resource is
the one identified by relatedResourceRef.
The value MUST reference the id
of a resource specified in Topology.
§ type: Values
for relationship type are not defined by the SDD specification. This type may
be specified in profiles [5.3].
Composite content elements organize the content of an SDD
but do not define artifacts used to deploy SDD content. There are three types
of composite content elements: CompositeInstallable, CompositeUnit
and CompositeLocalizationUnit.
CompositeInstallable is used any time that more than
one content element is defined in support of one operation on the package; any
time aggregation of SDDs is needed or any time the package includes selectable
content.
CompositeInstallable is the root of a content
hierarchy that supports a single deployment lifecycle operation. It can define
a base content hierarchy, a localization content hierarchy, and/or a selectable
content hierarchy and selection criteria. Base content defines content that is
deployed by default. Selectable content defines content that can be selected or
not by the deployer. Localization content defines content that provides
language support. One SDD can have more than one CompositeInstallable–each
supporting a different operation.
CompositeUnit is used to organize content elements
within the base or selectable content hierarchies. CompositeUnits can
define InstallableUnits, ConfigurationUnits, ContainedPackages
and other CompositeUnits. Requirements, conditions and variables that
are common to all content elements defined by the CompositeUnit can be
defined on the CompositeUnit to avoid repetition. Within the selectable
content hierarchy, a CompositeUnit can provide an efficient means for
selection of a set of related content elements by a Feature.
CompositeLocalizationUnit is described in the
Localization section [4.13].
Figure 73: CompositeInstallableType structure.
A CompositeInstallable supports the definition of
metadata about package content for one deployment lifecycle operation. One CompositeInstallable
can be defined for each operation supported by the software package. When more
than one CompositeInstallable is defined in an SDD, there MUST NOT be
more than one CompositeInstallable in scope for a particular deployment
defined for any one operation.
4.9.1.1 CompositeInstallableType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Identity
|
IdentityType
|
0..1
|
Human-understandable
identity information about the CompositeInstallable.
|
|
Condition
|
ConditionType
|
0..1
|
A
condition that determines if the content of the CompositeInstallable is
relevant to a particular deployment.
|
|
Variables
|
VariablesType
|
0..1
|
Variables
for use anywhere below the CompositeInstallable and in Topology.
|
|
RequiredBase
|
RequiredBaseType
|
0..1
|
Resource
or resources that can be updated by the CompositeInstallable.
|
|
Requirements
|
RequirementsType
|
0..1
|
Requirements
that must be met before successful application of the CompositeInstallable.
|
|
Languages
|
LanguageSelectionsType
|
0..1
|
Defines
required and selectable languages and groups of languages.
|
|
ResultingResource
|
ResultingResourceType
|
0..*
|
Resources
that result from applying the CompositeInstallable.
|
|
ResultingChange
|
ResultingChangeType
|
0..*
|
Configuration
changes that result from applying the CompositeInstallable.
|
|
BaseContent
|
BaseContentType
|
0..1
|
Defines
content describing the deployment of core resources.
|
|
SelectableContent
|
SelectableContentType
|
0..1
|
Defines
content describing the deployment of selectable resources.
|
|
LocalizationContent
|
LocalizationContentType
|
0..1
|
Defines
content whose sole purpose is to provide language support.
|
|
id
|
xsd:ID
|
1
|
A
unique identifier for the CompositeInstallable element.
|
|
operation
|
OperationType
|
1
|
The
deployment lifecycle operation described by the CompositeInstallable
definition.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.9.1.2 CompositeInstallableType Property Usage Notes
§ Identity: This
identity MAY have values in common with the identity of a resulting resource
created when artifacts defined by content of the composite are processed.
If the unit of packaging
described by the CompositeInstallable is known to a package management
system, the Identity elements SHOULD correspond to values associated
with that package in the package management system.
See the IdentityType
section for structure and additional usage details [3.4].
§ Condition: When
the condition defined in the CompositeInstallable is not met for a
particular deployment, the CompositeUnit and all the content elements
defined below the CompositeUnit are out of scope for that particular
deployment.
See the ConditionType
section for structure and additional usage details [4.5.1].
§ Variables:
Variables defined here are visible throughout the CompositeInstallable
and in Topology.
See the VariablesType section for structure and
additional usage details [4.6.3].
§ RequiredBase:
When a resource or resources corresponding to the overall software will be
modified during deployment, that resource or those resources MAY be defined in
the RequiredBase element. The RequiredBase definition represents
a requirement that the described resource be available for modification to
apply the single operation defined by the CompositeInstallable.
When RequiredBase is defined, the operation defined by CompositeInstallable
MUST be one of the following: update, undo, uninstall, or repair.
By specifying the required base separately from other requirements, it is
possible for consumers of the SDD to easily determine if the base is available
before processing other requirements.
See the RequiredBaseType
section for structure and additional usage details [4.7.8].
§ Requirements:
These are requirements that must be met regardless of what content is selected
for deployment and which conditions within the content hierarchy evaluates to
true.
Requirements that apply only to a
portion of the content SHOULD be defined at the point in the content hierarchy
where they apply.
All requirements specified on
content elements that are in scope for a particular deployment MUST be met.
This represents a logical “AND” of the requirements. Care should be taken by
the SDD author to ensure that conflicting requirements cannot be in scope for
the same deployment.
See the RequirementsType
section for structure and additional usage details [4.7.1].
§ Languages:
When the SDD contains language support, the Languages element can be
defined to describe the languages supported; which languages are required and
which are selectable; and how language selections are grouped.
Languages defined in the Mandatory
element under Languages are always in scope. Languages defined in the Optional
element under Languages are in scope if selected by the deployer.
The Languages element is
used to declare the mandatory and optional language support available in the
package. Languages whose support is deployed by LocalizationUnits in LocalizationContent
MUST be defined as either a mandatory language or an optional
language. In addition, languages whose support is deployed along with other
content by InstallableUnits in BaseContent or SelectableContent
SHOULD be defined as a mandatory language.
See the LanguageSelectionsType
section for structure and additional usage details [4.13.4].
§ ResultingResource:
The software whose deployment is described by the SDD can be described in the CompositeInstallable’s
ResultingResource element. This software may consist of many resources that
are described in the ResultingResource elements of the InstallableUnits
and/or LocalizationUnits defined within the CompositeInstallable.
See the ResultingResourceType
section for structure and additional usage details [4.8.1].
§ ResultingChange:
Configuration changes that result from deployment regardless of selected
content or condition evaluation can be described in the CompositeInstallable’s
ResultingChange element.
Note that a ResultingChange
is a change that is made to an existing resource. This is in contrast with ResultingResource,
which describes newly created resources.
See the ResultingChangeType
section for structure and additional usage details [4.8.2].
§ BaseContent:
The base content hierarchy defines content elements that are in scope by
default. These content elements MAY be conditioned out based on characteristics
of the deployment environment, but are not optional from the deployer’s
perspective.
See the BaseContentType
section for structure and additional usage details [4.11.1].
§ SelectableContent:
Content that is selected by feature MUST be defined in the selectable content
hierarchy. Groups and Features that select this content are also
defined within SelectableContent.
See the SelectableContentType
section for structure and additional usage details [4.12.1].
§ LocalizationContent:
All LocalizationUnits and ContainedLocalizationPackages MUST be
defined in the LocalizationContent hierarchy. Each LocalizationUnit
contains information about the languages it supports and the resources it
localizes. This information is evaluated to determine if the LocalizationUnit
is in scope for a particular deployment.
Each LocalizationUnit and ContainedLocalizationPackage
defined in LocalizationContent MAY support any combination of Mandatory
and Optional languages and can localize any combination of base and
selectable resources, as well as resources already deployed.
Some language support may be
deployed incidentally by artifacts in an InstallableUnit along with
deployment of other solution content. LocalizationContent holds only
content elements whose sole purpose is to provide language support.
LocalizationContent supports
advanced management of language support, including definition of mandatory and
optional languages and support of localization materials with a lifecycle that
is somewhat independent of the resources localized. When an SDD author has no
need for advanced management of language support, all language support MAY be
delivered with other content in InstallableUnits.
See the LocalizationContentType
section for structure and additional usage details [4.13.1].
§ id: The id
attribute may be useful to software that processes the SDD, for example, for
use in creating log and trace messages.
§ operation:
This is the operation that may be applied to the SDD package whose
metadata is described by the CompositeInstallable.
See the OperationType section for enumeration
values and their meaning [4.3.7].
Figure 74: CompositeUnitType structure.
The CompositeUnit element is used to organize content
elements within the base or selectable content hierarchies. It can define any
number of InstallableUnits, ConfigurationUnits, ContainedPackages
and other CompositeUnits. Composite units assist in organizing the
deployment package. A composite unit can provide a convenient way to specify
variables, requirements, conditions and other information that applies to every
content element defined below the composite unit. Within the selectable content
hierarchy, composite units can be used to group content elements that are
selected by feature sets or groups. When a feature containing a composite unit
is selected, all its child content elements are selected by association.
Organization of content within a composite unit does not imply any relationships
among the resources that result from deployment of the composite content.
4.9.2.1 CompositeUnitType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Identity
|
IdentityType
|
0..1
|
Human-understandable
identity information about the CompositeUnit.
|
|
Condition
|
ConditionType
|
0..1
|
A
condition that determines if the CompositeUnit and its child content elements
are relevant to a particular deployment.
|
|
Variables
|
VariablesType
|
0..1
|
Variables
for use within the CompositeUnit’s and its child content elements’
requirement and artifact definitions.
|
|
Requirements
|
RequirementsType
|
0..1
|
Requirements
that must be met prior to successful processing of any of the CompositeUnit’s
content.
|
|
InstallableUnit
|
InstallableUnitType
|
0..*
|
An
InstallableUnit that is part of the composite content.
|
|
ConfigurationUnit
|
ConfigurationUnitType
|
0..*
|
A
ConfigurationUnit that is part of the composite content.
|
|
CompositeUnit
|
CompositeUnitType
|
0..*
|
A
CompositeUnit that organizes a subset of the composite’s content.
|
|
ContainedPackage
|
ReferencedPackageType
|
0..*
|
A
ContainedPackage that is part of the composite content.
|
|
|
xsd:any
|
0..*
|
|
|
id
|
xsd:ID
|
1
|
An
identifier for the CompositeUnit scoped to the deployment descriptor.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.9.2.2 CompositeUnitType Property Usage Notes
§ Identity: This
identity MAY have values in common with the identity of a resulting resource
created when artifacts defined by content of the composite are processed.
If the unit of packaging
described by the CompositeUnit is known to a package management system,
some of the identity elements MAY correspond to values associated with that
package in the package management system.
See the IdentityType
section for structure and additional usage details [3.4].
§ Condition:
When the condition defined in the CompositeInstallable is not met for a
particular deployment, the CompositeUnit and all the content elements
defined below the CompositeUnit are out of scope for that particular
deployment.
See the ConditionType
section for structure and additional usage details [4.5.1].
§ Variables:
Variables defined here are visible within the CompositeUnit and every
content element defined below the CompositeUnit.
These variables are in scope for
a particular deployment only if the CompositeUnit is in scope for that
deployment.
See the VariablesType
section for structure and additional usage details [4.6.3].
§ Requirements:
These are requirements that must be met before any of the artifacts in the CompositeUnit
hierarchy can be processed.
These requirements are in scope
for a particular deployment only if the CompositeUnit is in scope for
that deployment.
The operation defined for
a Requirement defined in a CompositeUnit MUST be the same as the operation
defined by the CompositeInstallable containing the CompositeUnit.
See the RequirementsType
section for structure and additional usage details [4.7.1].
§ InstallableUnit:
See the InstallableUnitType section for structure and additional usage
details [4.3.1].
§ ConfigurationUnit:
See the ConfigurationUnitType section for structure and additional usage
details [4.3.2].
§ CompositeUnit:
A CompositeUnit element MAY contain child CompositeUnits.
§ ContainedPackage:
See the ReferencedPackageType section for structure and additional usage
details [4.10.1].
§ id: The id
attribute may be useful to software that processes the SDD, for example, for
use in creating log and trace messages.
SDD packages can aggregate other SDD packages. Metadata
about the aggregation is defined in ContainedPackage, ContainedLocalizationPackage
and Requisite elements. ContainedPackage elements are content
elements that can be defined anywhere in the base and selectable content
hierarchies. ContainedLocalizationPackages are content elements that can
be defined in the localization content hierarchy. Requisites are
packages that can be deployed, if necessary, to satisfy requirements in the
aggregating SDD. They are not content of the SDD package. The type of all three
of these elements is ReferencedPackageType. The term referenced
package is used in this specification when referring to these elements as a
group. The term referenced SDD is used when referring to any aggregated
SDD.
When an SDD aggregates other SDDs, the package descriptors
of the aggregated SDDs are included in the Contents list in the package
descriptor of the aggregating SDD (see Figure 75). The referenced package
elements in the deployment descriptor identify a referenced SDD package by
referencing its package descriptor definition in Contents. Each
referenced package element can further constrain the deployment of the
referenced SDD by defining additional requirements; by mapping resources
defined in the aggregating SDD to those defined in the referenced SDD; and by
determining feature selections for deployment of the referenced SDD.
Figure 75: The aggregating SDD identifies
the package descriptor of the aggregated SDD and maps resource definitions in
the aggregating SDD to resource definitions in the aggregated SDD.
Referenced packages can create and modify software resources
that may be required by the aggregating SDD or other SDDs in the aggregation.
These resources are mapped to the associated resource definitions in the
aggregating SDD by using the ResultingResourceMap, the ResultingChangeMap
and the RequiredResourceMap elements of a referenced package element.
The characteristics of these resources that other SDDs in the aggregation depend
on in some way MUST be exposed in the ResultingResourceMap, the ResultingChangeMap
and the RequiredResourceMap elements of the aggregating SDD (see Figure 76). These exposed characteristics are mapped to requirements, conditions and
resource variables in the SDDs to determine if requirements are satisfied, conditions
are met and to set the values of resource property variables (see Figure 77).
Figure 76: The list of resource maps is
segmented by the role the resource plays in the referenced SDD.
Figure 77: Arguments and OutputVariables
of ReferencedPackageType map variables in the aggregating SDD to variables in
the referenced SDD.
Figure 78: ReferencedPackageType structure.
A referenced package identifies an aggregated SDD and
describes the conditions of its aggregation. ReferencedPackageType provides
the type definition for ContainedPackage and Requisite elements. ContainedPackage
elements identify an SDD package that is treated like a content element of the
defining SDD. Requisite elements identify an SDD package that can be
deployed, if necessary, to satisfy resource constraints.
4.10.1.1 ReferencedPackageType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Condition
|
ConditionType
|
0..1
|
A
condition that determines if the referenced package is relevant to a
particular deployment.
|
|
RequiredContentSelection
|
RequiredContentSelectionType
|
0..1
|
A
list of groups and features that MUST be selected when the referenced package
is deployed.
|
|
Arguments
|
ArgumentListType
|
0..1
|
Inputs
to the reference package.
|
|
OutputVariables
|
OutputVariableListType
|
0..1
|
Outputs
from the referenced package.
|
|
Requirements
|
RequirementsType
|
0..1
|
Additional
requirements for deploying the referenced package as part of the aggregation.
|
|
ResultingResourceMap
|
ResultingResourceMapType
|
0..*
|
Maps
resulting resources in the referenced package to resources in the referencing
package and exposes properties of the resulting resource.
|
|
ResultingChangeMap
|
ResultingChangeMapType
|
0..*
|
Maps
changed resources defined in the referenced package to resources in the
referencing package and exposes changed properties of the resource.
|
|
RequiredResourceMap
|
ResourceMapType
|
0..*
|
Maps
required resources in the referenced package to resources in the referencing
package.
|
|
Languages
|
LanguagesType
|
0..1
|
Languages
supported by the referenced package.
|
|
|
xsd:any
|
0..*
|
|
|
id
|
xsd:ID
|
1
|
Identifier
for the referenced package element that is unique within the deployment
descriptor.
|
|
contentRef
|
xsd:token
|
1
|
Reference
to the identifier of the package Content defined in the package descriptor
which identifies the package descriptor of the referenced package.
|
|
weight
|
xsd:positiveInteger
|
0..1
|
The
time required to process the referenced package relative to all artifacts and
other referenced packages in the SDD.
|
|
operation
|
OperationType
|
0..1
|
Specifies
which operation in the referenced SDD is performed.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.10.1.2 ReferencedPackageType Property Usage Notes
§ Condition: A Condition
is used when the ReferencedPackage’s content should only be deployed
when certain conditions exist in the deployment environment.
See the ConditionType section for structure and
additional usage details [4.5.1].
§ RequiredContentSelection:
Certain Groups or Features may need to be selected when deploying
the referenced package. These can be identified in the RequiredContentSelection
element.
If one particular aggregated SDD
requires the selection of different groups or features, depending on other
choices made during a particular deployment, different Requisite or ContainedPackage
elements can be defined in a way that will cause the correct combination of Groups
and Features to be used in each situation.
See the RequiredContentSelectionType
section for structure and additional usage details [4.12.13].
§ Arguments:
Arguments are used to provide values for input variables defined in the
deployment descriptor of the referenced package. The argument name specified
MUST reference the id of a parameter in the referenced package.
See the ArgumentListType
section for structure and additional usage details [4.3.8].
§ OutputVariables:
The output variable mapping can be used to set variables to outputs created by
processing the referenced SDD. The output variables in the referenced package
are mapped to output variables in the aggregating SDD.
Each output variable value specified
MUST reference the id of an output variable in the referenced package.
This can be an output variable from an artifact or an output variable from a referenced
package defined within the referenced SDD.
See the OutputVariableListType
section for structure and additional usage details [4.3.10].
§ Requirements:
When the aggregating SDD has stricter requirements for the use of the
referenced SDD than are defined by the referenced SDD itself, those
requirements can be defined in Requirements. This is not intended to
repeat requirements expressed in the referenced SDD, but rather to add
additional stricter requirements.
Requirements expressed in the
referenced SDD need to be satisfied, in addition to the requirements expressed
in the Requisite or ContainedPackage element of the aggregating
SDD.
Requirements expressed in the
aggregating SDD MUST NOT conflict with requirements expressed in the referenced
SDD. The requirements specified MUST further constrain the referenced package.
See the RequirementsType
section for structure and additional usage details [4.7.1].
§ ResultingResourceMap:
Resources created by the referenced package may be resources that are defined
in the aggregating SDD. The ResultingResourceMap is used to identify the
correspondence between resource definitions in the aggregating SDD and
resulting resource definitions in the aggregated SDD.
Characteristics of the resulting
resources MAY be exposed in the ResultingResourceMap element. ResourceConstraints
defined on those resources anywhere in the aggregation are mapped to the
resource properties exposed in the resulting maps of the referenced package to
determine if the referenced package will satisfy the constraints. Each
individual constraint is considered met by the referenced package if a property
exposed in the resulting resource map that is in scope for the particular
deployment satisfies the constraint.
For example, a property constraint in a ResourceConstraint
element states that the property named “FileAttributes” has the value
“Writeable”. The resourceRef in the ResourceConstraint identifies
a resource defined in Topology that is also identified in the ResultingResourceMap
of a Requisite or ContainedPackage element that is in scope for
the particular deployment. If the ResultingResourceMap element contains
a statement that the property named “FileAttributes” has the value “Writeable”,
then the ResourceConstraint is met when the Requisite or ContainedPackage
is deployed.
This same logic applies to ResourceConstraints
in aggregated packages. If the SDD in the preceding example also aggregates
another SDD and maps the same resource to a required resource in that
aggregated SDD, then all ResourceConstraints in the aggregated SDD are
met only if the ResultingResourceMap of the referenced SDD that creates
that resource contains a Name, Version or Property definition
that satisfies the constraint.
See the ResultingResourceMapType
section for structure and additional usage details [4.10.3].
§ ResultingChangeMap:
Resources configured by the referenced package may be resources that are defined
in the aggregating SDD. The ResultingChangeMap is used to identify the
correspondence between resource definitions in the aggregating SDD and changed
resources defined in ResultingChange elements of the aggregated SDD.
Characteristics of resources that
are changed by the referenced SDD MAY be exposed in the ResultingChangeMap.
These are correlated with ResourceConstraints on the changed resource in
the same manner as the exposed characteristics of a resulting resource. See the
property usage notes for ResultingResourceMap above.
See the ResultingChangeMapType
section for structure and additional usage details [4.10.4].
§ RequiredResourceMap:
When a resource required by the aggregated SDD is a resource also defined in
the aggregating SDD, the RequiredResourceMap is used to identify the
correspondence. This element is a simple mapping of a resource in one SDD to a
resource in another. There is no need to expose characteristics of the resource
because it is not created or modified by the referenced package.
One resource MAY be required,
resulting, changed, all three or any combination of these within one SDD. When
a resource in the referenced SDD plays more than one role, the mapping MUST be
repeated everywhere it applies. This allows exposure of all the created or
modified properties in the ResultingChangeMap and ResultingResourceMap.
In this situation–when one resource in the referenced SDD plays more than one
of the roles identified earlier (required, resulting or changed)–all mappings
MUST be to the same resource in the aggregating SDD. Only the exposed resulting
and changed properties differ.
See the ResourceMapType
section for structure and additional usage details [4.10.2].
§ Languages:
Languages supported by the referenced package MAY be identified here. This list
does not identify mandatory versus optional languages; it is for informational
purposes only. The SDD author is not limiting use of the referenced package to
deployments where all in-scope languages are found in this list. There may be
cases where aggregated packages are deployed even though they cannot support
all of the languages supported by the aggregation as a whole.
Each language specified MUST
match a language in the referenced package.
See the LanguagesType
section for structure and additional usage details [4.13.6].
§ id: The id
attribute may be useful to software that processes the SDD, for example, for
use in creating log and trace messages.
§ contentRef:
The package descriptor of an SDD that aggregates other SDDs, either through ContainedPackage
elements or Requisite elements, will list the package descriptor files
of the aggregated SDDs in its content list. The contentRef attribute of
a referenced package element MUST be a reference to the id of a Content
element in the aggregating SDD’s package descriptor that defines the aggregated
package descriptor.
§ weight:
Defining weights for all artifacts and referenced packages in an SDD provides
useful information to software that manages deployment. The weight of the
referenced package refers to the relative time taken to deploy the referenced
package with respect to other packages in this SDD.
For example, if the referenced package takes twice as
long to deploy as a particular install artifact whose weight is “4”, then the
weight of the referenced package would be “8”. The weight numbers have no
meaning in isolation and do not describe actual time elapsed. They simply
provide an estimate of relative time.
§ operation: The
referenced SDD may support more than one deployment lifecycle operation. The operation
attribute MUST include the operations that are applicable when this is the
case.
See the OperationType
section for enumeration values and their meaning [4.3.7].
Figure 79: ResourceMapType structure.
ResourceMapType is used in the definition of elements
that map resources in an SDD to resources in a referenced SDD. The purpose of a
resource map is to identify when two resources in separate SDDs MUST resolve to
the same resource instance during any particular deployment. The
characteristics of a mapped resource that are defined in the topology sections
of the two SDDs MUST NOT conflict.
For example, if a Name is defined for the
resource in both topologies, it MUST be the same in both definitions and if a Property
definition is included for the same property in both places, the value MUST be
the same.
Additional characteristics of a mapped resource may be
constrained by Requirements or Conditions in either SDD. All
constraints on a mapped resource that are in scope for a particular deployment
MUST NOT conflict.
Resources that are not mapped between the two SDDs MAY
resolve to the same instance when their characteristics defined in topology do
not conflict and when the constraints in scope for any particular deployment do
not conflict.
The RequiredResourceMap, ResultingResourceMap
and ResultingChangeMap elements all use ResourceMapType, either directly
or as a base type that is extended.
4.10.2.1 ResourceMapType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
resourceRef
|
xsd:IDREF
|
1
|
Reference
to a resource defined in the deployment descriptor.
|
|
foreignID
|
xsd:NCName
|
0..1
|
Reference
to a resource defined in a referenced deployment descriptor.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.10.2.2 ResourceMapType Property Usage Notes
§ resourceRef:
The value of the resourceRef MUST be set to the id of the
resource in the SDD to be mapped to a resource in a referenced SDD.
§ foreignID: The
value MUST reference the id of a resource in the referenced package.
This is the resource in the referenced SDD that MUST resolve to the same
resource instance as the resource identified in resourceRef.
Figure 80: ResultingResourceMapType structure.
ResultingResourceMapType defines an element type that
maps resources that result from deployment of the referenced SDD to a resource
in the referencing SDD. In addition to identifying the two resources that MUST
resolve to the same resource instance, the resulting resource map allows
characteristics of the resulting resource to be exposed. There may be
constraints defined on the mapped resource in the referencing SDD or any
referenced SDD in the hierarchy of SDDs. These constraints can be evaluated by
comparing the constraint to the exposed characteristics defined in the
resulting resource map. The resulting resource map MUST expose sufficient
characteristics of the resulting resource to support successful evaluation of constraints
on that resource.
For example, say that the SDD defines a resource with
id=”Database” in its topology. The solution can work with Database Product A or
Database Product B. Database Product A is created by a referenced SDD defined
in a Requisites element. The SDD will contain Requirements and/or
Conditions that have alternatives for each of the database products. All
constraints on the Database resource that apply to Database Product A must be
satisfied by a resource characteristic exposed in the ResultingResourceMap
element of the Requisite element that points to the SDD that deploys
Database Product A.
4.10.3.1 ResultingResourceMapType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
|
[extends]
ResourceMapType
|
|
See
the ResourceMapType section for additional properties [4.10.2].
|
|
Condition
|
ConditionType
|
0..1
|
A
condition that determines if the resulting resource definition is relevant to
a particular deployment.
|
|
Name
|
VariableExpressionType
|
0..1
|
The
name of the resource created or updated by the referenced SDD.
|
|
Version
|
VersionType
|
0..1
|
The
version of the resource created or updated by the referenced SDD.
|
|
FixName
|
xsd:string
|
0..*
|
Names
of fixes to the mapped resource that are created by the referenced SDD.
|
|
Property
|
ResultingPropertyType
|
0..*
|
Properties
set when the mapped resource is created or updated by the referenced SDD.
|
|
Relationship
|
RelationshipType
|
0..*
|
Relationship
that will exist after creating or updating the resource.
|
|
|
xsd:any
|
0..*
|
|
4.10.3.2 ResultingResourceMapType Property Usage Notes
See the ResourceMapType section for details of the
inherited attributes and elements [4.10.2].
§ Condition: A Condition
is used when the resulting resource will be created by the referenced package
only when certain conditions exist in the deployment environment.
See the ConditionType
section for structure and additional usage details [4.5.1].
§ Name: The Name
of the resulting resource created or updated by the referenced SDD MUST be
defined if it is not defined elsewhere and there are constraints on this
resource that contain a Name element. “Defined elsewhere” means defined
in the topology of the referencing SDD or in the topology of any other
referenced SDD for a resource that is also mapped to the same resource.
“Constraints on this resource” means a constraint that applies to the
particular instantiation of the resource that is created or updated by the
referenced SDD, for example a constraint that needs to successfully map to the
referenced SDD for the referenced SDD to be used in a particular deployment.
See the VariableExpressionType
section for structure and additional usage details [4.6.1].
§ Version: The Version
of the resulting resource created or updated by the referenced SDD MUST be
defined if it is not defined elsewhere and there are version constraints
defined on this resource. (See the usage note for Name above for a
definition of “defined elsewhere”.)
See the VersionType
section for structure and additional usage details [3.10].
§ FixName: One
or more names of fixes to the resulting resource created or updated by the
referenced SDD MUST be defined if they are not defined elsewhere and there are
version constraints defined on this resource that include fix names. (See the
usage note for Name above for a definition of “defined elsewhere”.)
§ Property: A Property
of the resulting resource created or updated by the referenced SDD MUST be
defined if it is not defined elsewhere and there are property constraints on
this property. (See the usage note for Name above for a definition of
“defined elsewhere”.)
See the ResultingPropertyType
section for structure and additional usage details [4.2.4].
§ Relationship:
Any number of Relationship elements can be included to identify
relationships that will exist after applying the referenced package.
See the RelationshipType section for structure
and additional usage details [4.8.3].
Figure 81: ResultingChangeMapType structure.
ResultingChangeMapType is very similar to ResultingResourceMapType.
It defines an element type that maps resources that are changed by deployment
of the referenced SDD to a resource in the referencing SDD. In addition to
identifying the two resources that MUST resolve to the same resource instance,
the resulting change map allows characteristics of the modified resource to be
exposed. There may be constraints defined on the mapped resource in the
referencing SDD or any referenced SDD in the hierarchy of SDDs. These
constraints can be evaluated by comparing the constraint to the exposed
characteristics defined in the resulting change map. The resulting change map
MUST expose sufficient characteristics of the resulting change to support
successful evaluation of constraints on that resource.
For example, say that the SDD defines a resource with
id=”OS” in its topology. The solution can work with Windows or Linux. Linux is
configured by a referenced SDD defined in a Requisites element. The SDD
will contain Requirements and/or Conditions that have
alternatives for Windows and for Linux. All constraints on the modified
characteristics of Linux must be satisfied by a resource characteristic exposed
in the ResultingChangeMap element of the Requisite element that
points to the SDD that configures Linux.
4.10.4.1 ResultingChangeMapType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
|
[extends]
ResourceMapType
|
|
See
the ResourceMapType section for additional properties [4.10.2].
|
|
Condition
|
ConditionType
|
0..1
|
A
condition that determines if the resulting change definition is relevant to a
particular deployment.
|
|
Name
|
VariableExpressionType
|
0..1
|
The name
of the modified resource.
|
|
Property
|
ResultingPropertyType
|
0..*
|
A
modified property of the resource.
|
|
Relationship
|
RelationshipType
|
0..*
|
Relationship
that will exist after the change is applied to the resource.
|
|
|
xsd:any
|
0..*
|
|
4.10.4.2 ResultingChangeMapType Property Usage Notes
See the ResourceMapType section for details of the
inherited attributes and elements [4.10.2].
§ Condition: A Condition
is used when the resource mapped from the external package will be changed only
when certain conditions exist in the deployment environment.
See the ConditionType section for structure and
additional usage details [4.5.1].
§ Name: The Name
of the resource that is modified by the referenced SDD is defined here to
assist with identifying the resource instance that is changed. It is not an
indication that the resource name itself is modified by the referenced SDD. If
resource characteristics defined in the topology of any SDD defining a resource
mapped to the changed resource are sufficient to identify the resource, then Name
SHOULD NOT be defined in the ResultingChangeMap.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
§ Property: A
modified property MUST be exposed in a ResultingChangeMap if it is not
defined elsewhere and there are property constraints on the modified property.
“Defined elsewhere” means defined in the topology of the referencing SDD or in
the topology of any other referenced SDD for a resource that is also mapped to
the same resource. “Constraints on the modified property” means a property
constraint that applies to the particular instantiation of the resource that is
modified by the referenced SDD, for example a constraint that needs to
successfully map to the referenced SDD for the referenced SDD to be used in a
particular deployment.
See the ResultingPropertyType
section for structure and additional usage details [4.2.4].
§ Relationship:
Relationship elements SHOULD be included to identify relationships that
will exist after the application of the referenced package.
Relationships that need to be known
by the aggregate MUST be mapped. Relationships need to be known when they are
referred to in one or more resource constraints.
See the RelationshipType section for structure
and additional usage details [4.8.3].
Figure 82: RequisitesType structure.
The Requisites element contains a list of references
to SDD packages that can be used to satisfy one or more of the requirements
defined by content elements. The definition of a requisite does not imply that
it must be used; only that it is available for use if needed.
Requisite definitions can map values and resources defined
in the SDD to inputs and resources defined in the requisite SDD.
4.10.5.1 RequisitesType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
ReferencedPackage
|
ReferencedPackageType
|
1..*
|
An
SDD package that can, but is not required to, be deployed to satisfy a
requirement.
|
4.10.5.2 RequisitesType Property Usage Notes
§ ReferencedPackage:
See the ReferencedPackageType section for structure and additional usage
details [4.10.1].
Base content is the default content for the deployment
lifecycle operation associated with the CompositeInstallable that contains
the base content. This is content that is deployed whenever the associated
operation is performed on the SDD package. Base content may be conditioned on
characteristics of the deployment environment but it is not selectable by the
deployer.
Resources associated with base content for one operation may
be different from resources associated with base content for a different
operation in the same SDD package.
For example, base content in the CompositeInstallable
for the configuration operation may configure resources that were created by
selectable content in the CompositeInstallable for the install
operation. In this example, the configuration is in base content because it
must be done if the resource exists. It is not selectable by the deployer
during the configuration operation.
Figure 83: BaseContentType structure.
The BaseContent hierarchy defines the default content
for the deployment operation described by the CompositeInstallable. This
content MAY be conditioned.
4.11.1.1 BaseContentType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
InstallableUnit
|
InstallableUnitType
|
0..*
|
An
InstallableUnit that defines base content.
|
|
ConfigurationUnit
|
ConfigurationUnitType
|
0..*
|
A
ConfigurationUnit that defines base configuration content.
|
|
CompositeUnit
|
CompositeUnitType
|
0..*
|
A
CompositeUnit that organizes base content.
|
|
ContainedPackage
|
ReferencedPackageType
|
0..*
|
An
SDD whose content is considered to be base content in the context of this
aggregation.
|
|
|
xsd:any
|
0..*
|
|
4.11.1.2 BaseContentType Property Usage Notes
§ InstallableUnit:
See the InstallableUnitType section for structure and additional usage
details [4.3.1].
§ ConfigurationUnit:
See the ConfigurationUnitType section for structure and additional usage
details [4.3.2].
§ CompositeUnit:
See the CompositeUnitType section for structure and additional usage
details [4.9.2].
§ ContainedPackage:
See the ReferencedPackageType section for structure and additional usage
details [4.10.1].
The SDD author MAY define selectable subsets of content
using Groups and Features. Selectability, as used in the SDD, is
a characteristic of the deployment lifecycle operation and the package. The
decision to provide selectability for one operation in one package has no
semantic relationship to the selectability provided in another package related
to the same software. It also has no semantic relationship to the selectability
provided for a different operation within the same package.
For example, when the SDD author chooses to create a
feature in a maintenance package, that feature is designed to allow selectable
application of the maintenance, not to reflect the original set of features for
the base content.
Figure 84: SelectableContentType structure.
Content elements defined here make up the selectable content
hierarchy. These elements are selected via Groups and Features
also defined under SelectableContent.
4.12.1.1 SelectableContentType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Groups
|
GroupsType
|
0..1
|
Groups
of features that can be selected as a unit.
|
|
Features
|
FeaturesType
|
0..1
|
A
definition of user-selectable content.
|
|
InstallableUnit
|
InstallableUnitType
|
0..*
|
An
InstallableUnit that defines selectable content.
|
|
ConfigurationUnit
|
ConfigurationUnitType
|
0..*
|
A
ConfigurationUnit that defines selectable configuration.
|
|
CompositeUnit
|
CompositeUnitType
|
0..*
|
A
CompositeUnit that organizes content elements that define selectable content.
|
|
ContainedPackage
|
ReferencedPackageType
|
0..*
|
An
SDD package whose content is selectable in the context of the aggregating
SDD.
|
|
|
xsd:any
|
0..*
|
|
4.12.1.2 SelectableContentType Property Usage Notes
§ Groups: Groups
can be used by the SDD author to define a convenient way for deployers to
select a group of features.
“Typical” and “Custom” are examples of groups that
are commonly presented in installation interfaces.
See the GroupsType
section for structure and additional usage details [4.12.2].
§ Features: Features
can be used to organize optional functionality into meaningful selections. Features
should be meaningful from the deployer’s point of view.
See the FeaturesType
section for structure and additional usage details [4.12.4].
§ InstallableUnit:
See the InstallableUnitType section for structure and additional usage
details [4.3.1].
§ ConfigurationUnit:
See the ConfigurationUnitType section for structure and additional usage
details [4.3.2].
§ CompositeUnit:
See the CompositeUnitType section for structure and additional usage
details [4.9.2].
§ ContainedPackage:
See the ReferencedPackageType section for structure and additional usage
details [4.10.1].
Figure 85: Groups structure.
GroupsType is used in SelectableContent to
provide a list of one or more Group elements.
4.12.2.1 GroupsType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Group
|
GroupType
|
1..*
|
A
group of features that can be selected together.
|
4.12.2.2 GroupsType Property Usage Notes
§ Group: Associating
features in a Group is based on the characteristics of the package and
the ways in which the SDD author chooses to expose function variability to the
deployer.
One example is a “Typical” group that allows easy
selection of the most common grouping of features, along with a “Custom” group that
allows an advanced user to select from among all features. Another example is a
“Client” group that selects features that deploy the client software for an
application, along with a “Server” group that selects features that deploy the
server software for the same application.
If alternative sets of
selections are desired, Groups MUST be used to define these sets. Zero or one
set can be selected for any particular deployment
See the GroupType section
for structure and additional usage details [4.12.3].
Figure 86: GroupType structure.
GroupType provides the type definition for each Group
element in SelectableContent’s list of Groups. For a particular
deployment, zero or one groups may be selected by the deployer.
4.12.3.1 GroupType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
DisplayName
|
DisplayTextType
|
0..1
|
A
human-readable name for the group.
|
|
Description
|
DisplayTextType
|
0..1
|
A
human-readable description of the group.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
A
human-readable short description of the group.
|
|
SelectedFeature
|
FeatureReferenceType
|
1..*
|
A
feature that is part of the group.
|
|
|
xsd:any
|
0..*
|
|
|
id
|
xsd:ID
|
1
|
An
identifier of the group that is unique within the descriptor.
|
|
default
|
xsd:boolean
|
0..1
|
Indicates
that the group is selected by default when no selections are provided by the
deployer.
**default
value=“false”
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.12.3.2 GroupType Property Usage Notes
§ DisplayName:
This element MAY be used to provide human-understandable information. If used,
it MUST provide a label for the group.
See the DisplayElementGroup section
for structure and additional usage details [4.14.2].
§ Description,
ShortDescription: These elements MAY be used to provide human-understandable
information. If used, they MUST provide a description of the group.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DisplayElementGroup
section for structure and additional usage details [4.14.2].
§ SelectedFeature:
Each SelectedFeature is considered selected if inputs identify the group
as selected.
Selection of a nested feature
causes its parent feature to be selected.
See the FeatureReferenceType section for
structure and additional usage details [4.12.8].
§ id: The
group’s id may be used to refer to the group when aggregating the SDD
into another SDD.
The id attribute may be useful to software that
processes the SDD, for example, for use in creating log and trace messages.
§ default:
Multiple default Groups MUST NOT be defined.
Figure 87: FeaturesType structure.
FeaturesType provides the type definition for the
single, optional, Features element in SelectableContent. Features
defined directly under the Features element in SelectableContent
are the top level features. A Features element may also include a MultiSelect
element that refers to features whose selections are interdependent.
4.12.4.1 FeaturesType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Feature
|
FeatureType
|
1..*
|
A top
level feature in the hierarchy of features defined in SelectableContent.
|
|
MultiSelect
|
MultiSelectType
|
0..*
|
A
list of feature references whose selection is controlled as a multi-select
list with defined minimum and maximum selections.
|
|
|
xsd:any
|
0..*
|
|
4.12.4.2 FeaturesType Property Usage Notes
§ Feature: Each top
level Feature can define NestedFeatures. All features can define
required relationships with other features that cause the required feature to
be selected.
See the FeatureType
section for structure and additional usage details [4.12.5].
§ MultiSelect:
The MultiSelect element MUST refer to Feature or NestedFeature
elements.
See the MultiSelectType
section for structure and additional usage details [4.12.15].
Figure 88: FeatureType structure.
FeatureType provides the type definition for each
feature defined directly below SelectableContent. A Feature can
define NestedFeatures and identify ContentElements and other
features that will be selected when the feature is selected. A feature can also
be defined to be available for selection only under certain conditions.
4.12.5.1 FeatureType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
|
[extends]
NestedFeatureType
|
|
See
the NestedFeatureType section for additional properties [4.12.6].
|
|
required
|
xsd:boolean
|
0..1
|
Indicates
the feature must be selected.
**default
value=“false”
|
4.12.5.2 FeatureType Property Usage Notes
See the NestedFeatureType section for details of the
inherited attributes and elements [4.12.6].
§ required: A
top level Feature MUST be selected when the value of the required
attribute is “true”. In this case, the user cannot choose to deselect this top level
Feature.
In Features that define Multiplicity,
the SDD author can state a minimum number of instances of the Feature.
This minimum applies only if the Feature is selected. The required
attribute can be used to indicate that the Feature is always selected
and so the minimum number of instances applies.
The required attribute
SHOULD be used only when Multiplicity is applied to the Feature.
Figure 89: NestedFeatureType structure.
NestedFeatureType is identical to FeatureType except
that NestedFeatureType does not define a required attribute. All
features other than those defined directly below SelectableContent use the
NestedFeatureType.
4.12.6.1 NestedFeatureType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
DisplayName
|
DisplayTextType
|
0..1
|
A
human-readable name for the feature.
|
|
Description
|
DisplayTextType
|
0..1
|
A
human-readable description of the feature.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
A
human-readable short description of the feature.
|
|
Condition
|
ConditionType
|
0..1
|
A
condition that determines if the feature is relevant to a particular
deployment.
|
|
Multiplicity
|
MultiplicityType
|
0..1
|
Both
an indication that multiple instances of the feature can be selected and the
specification of their constraints.
|
|
Languages
|
LanguageSelectionsType
|
0..1
|
A
list of language support available for the feature’s content.
|
|
NestedFeature
|
NestedFeatureType
|
0..*
|
A
nested feature.
|
|
ContentElement
|
ContentElementReferenceType
|
0..*
|
A
reference to a content element to be deployed when the feature is selected.
|
|
PackageFeatureReference
|
PackageFeatureReferenceType
|
0..*
|
A
reference to a feature to be selected in a ContainedPackage defined in either
the BaseContent or SelectableContent hierarchies.
|
|
RequiredFeature
|
FeatureReferenceType
|
0..*
|
A
reference to a feature that is required when the defining feature is selected
and so is selected automatically.
|
|
Variable
|
DerivedVariableType
|
0..*
|
The
definition of a variable that can be used anywhere in any variable expression
in the SDD.
|
|
|
xsd:any
|
0..*
|
|
|
id
|
xsd:ID
|
1
|
Used
within the SDD to refer to the feature.
|
|
addOn
|
xsd:boolean
|
0..1
|
A
“true” value indicates that the feature can be added to a deployed instance
of the solution.
**default
value=“false”
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.12.6.2 NestedFeatureType Property Usage Notes
§ DisplayName:
This element MAY be used to provide human-understandable information. If used,
it MUST provide a label for the nested feature.
See the DisplayElementGroup section for
structure and additional usage details [4.14.2].
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the nested feature.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DisplayElementGroup
section for structure and additional usage details [4.14.2].
§ Condition: If
the features and its nested features are only applicable in certain
environments, a Condition can be defined. When the Condition is
not met, the feature and its nested features are not in scope.
For example, some features may be available only on a
Linux operating system, even though the software can be applied on other
operating systems. In this case, a Condition can be defined to cause the
feature to be ignored when the operating system is not Linux.
See the ConditionType section for structure and
additional usage details [4.5.1].
§ Multiplicity:
When multiple instances of a feature can be selected, a Multiplicity
element MUST be defined.
For example, a solution that includes a server and a
client may allow the deployment of multiple clients. In this situation, a feature
that defines a Multiplicity element would select the content elements
that deploy the client software.
See the MultiplicityType
section for structure and usage details [4.12.7].
§ Languages:
Sometimes language support for a feature is different than that available for
the overall solution. This is especially likely when features are implemented
by aggregation of packages provided by different teams. When language support
differs, the Languages element of the feature MUST be defined to state
which languages are supported for the feature.
When Languages is defined in a feature, it
overrides the global declaration of supported languages and MUST declare the
complete set of language support available for that feature.
If Languages is not
defined, the global declaration of supported languages in CompositeInstallable
applies for the feature.
See the LanguageSelectionsType section for
structure and additional usage details [4.13.4].
§ NestedFeature:
A NestedFeature must be explicitly selected. It is not assumed to be selected
when the parent feature is selected. Selection of a nested feature causes its parent
feature to be selected, but not vice-versa. The definition of a NestedFeature
indicates that application of the NestedFeature is dependent on
application of the parent feature.
§ ContentElement:
The ContentElement referred to MUST be in the selectable content
hierarchy defined by the SelectableContent element.
When the content reference is to a CompositeUnit,
the composite and all content elements below it in the content hierarchy are
considered to be in scope when the feature is selected. Ease of referencing a
group of content from a feature can be one reason for using a composite in the
content hierarchy.
See the ContentElementReferenceType section for
structure and additional usage details [4.12.9].
§ PackageFeatureReference:
Selection of a feature may result in selection of an aggregated package’s
feature identified by a ContainedPackage element anywhere in the BaseContent
or SelectableContent hierarchies. A PackageFeatureReference
identifies both the ContainedPackage and the applicable features to be
selected in that package.
See the PackageFeatureReferenceType section for
structure and additional usage details [4.12.10].
§ RequiredFeature:
When the selection of one feature requires the selection of another feature,
the RequiredFeature can be used to specify this requirement.
When two features identify each other as required
features, they are always selected together.
The selection of the defining feature MUST cause the
required feature to be selected.
See the FeatureReferenceType section for
structure and additional usage details [4.12.8].
§ Variable: Variables
defined in features are useful when inputs to an artifact need to vary based on
which features are selected for a particular deployment. Artifact arguments can
be defined in terms of feature Variables to allow for this variation. When
an artifact deploys selectable content, inputs to the artifact that indicate
the selections for a particular deployment can be associated with feature
selection in the SDD via feature Variables.
For example, a Feature that deploys a trace
facility might define a Variable called “TraceSettings”. The value of an
argument to a base content artifact might define its value as “$(TraceSettings)”.
If the feature is selected, this argument would be used and its value would be
taken from the feature Variable. If the feature is not selected, the
argument would be ignored.
A Variable defined in a feature differs from Variable
elements defined in content elements in one important way. A reference to an
undefined feature Variable is treated as an empty string and is
considered to be defined.
See the DerivedVariableType section for
structure and additional usage details [4.6.13].
§ id: Provides
the means to reference a feature from other features.
The id attribute may be useful to software that
processes the SDD, for example, for use in creating log and trace messages.
§ addOn: When a
solution and the artifacts that deploy the various parts of the solution are
designed in a way that supports the addition of a particular feature at
a later time (after the deployment of the base solution), the addOn
attribute is set to “true”.
Figure 90: MultiplicityType structure.
Some solutions allow multiple instances of some portion of
the solution’s resources to be deployed as part of the solution.
For example, a solution that includes a server and a
client may allow the deployment of multiple clients. The deployment of each
client may involve content elements that represent several different resulting
resources, features that control optional functionality of the client and
configuration elements that configure the client. All of these can be defined within
a “Client” feature that declares a Multiplicity element that indicates
that multiple clients are allowed. Each selection or “instance” of the feature
results in the deployment of a client.
The phrase “feature instance” is used to refer to the set of
instances of all resources deployed when the feature is selected. It does not
imply that features themselves are represented as having lifecycle or that features
in the SDD correspond with feature instances in the deployment environment.
4.12.7.1 MultiplicityType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
ConstrainedFeature
|
FeatureReferenceType
|
0..*
|
A
nested feature whose selection must be the same for all instances of the
defining feature in a particular deployment.
|
|
ConstrainedResource
|
ConstrainedResourceType
|
0..*
|
A
resource that must resolve to the same resource instance for all instances of
the feature in a particular deployment.
|
|
|
xsd:any
|
0..*
|
|
|
multiplesAllowed
|
xsd:boolean
|
1
|
Indicates
that multiple instances of the feature are allowed.
**fixed
value=“true”
|
|
minSelections
|
xsd:positiveInteger
|
0..1
|
The
minimum number of instances of the feature that must be selected if the feature
is selected at all.
**default
value=“1”
|
|
maxSelections
|
xsd:positiveInteger
|
0..1
|
That
maximum number of instances of the feature that can be selected.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.12.7.2 MultiplicityType Property Usage Notes
§ ConstrainedFeature:
A feature with multiplicity may contain NestedFeature elements. When a NestedFeature
is identified in a ConstrainedFeature, then all instances of the
defining Feature MUST make the same selection choice for that NestedFeature.
See the FeatureReferenceType
section for structure and additional usage details [4.12.8].
§ ConstrainedResource:
The content elements selected by a feature may express constraints on
resources. When the resource constraints for each instance of a feature must
resolve to the same resource instance, or when all must resolve to unique
resource instances, the resource is referred to and the constraint type is
identified in the ConstrainedResource element.
See the ConstrainedResourceType
section for structure and additional usage details [4.12.11].
§ multiplesAllowed:
This is an attribute with a fixed value of “true”. It is included because all
other elements and attributes of MultiplicityType are optional. A feature
that allows multiples but has no need to define constraints on resources,
features or number of instances would define a Multiplicity element that
had only the multiplesAllowed attribute.
§ minSelections:
When a feature is selected, if more than one instance of the feature is
required, minSelections MUST be specified.
§ maxSelections:
When a feature is selected, if there is a limit on the number of instances of the
feature that can be selected, maxSelections MUST be specified. If maxSelections
is defined, it MUST be equal to or greater than minSelections.
Figure 91: FeatureReferenceType structure.
FeatureReferenceType provides a way to reference a feature
defined in the SDD from within the SDD.
4.12.8.1 FeatureReferenceType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
featureRef
|
xsd:IDREF
|
1
|
Reference
to a feature defined in the deployment descriptor.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.12.8.2 FeatureReferenceType Property Usage Notes
§ featureRef: The
value MUST reference the id of a feature in the deployment descriptor.
Figure 92: ContentElementReferenceType structure.
ContentElementReferenceType provides a way to
reference a content element defined in the SDD from within a feature.
4.12.9.1 ContentElementReferenceType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
contentElementRef
|
xsd:IDREF
|
1
|
Reference
to a content element in the deployment descriptor’s selectable content.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.12.9.2 ContentElementReferenceType Property Usage Notes
§ contentElementRef:
The value MUST reference the id of a content element in the deployment
descriptor.
Figure 93: PackageFeatureReferenceType structure.
PackageFeatureReferenceType provides a way to
reference a feature defined in a referenced SDD. It identifies the ContainedPackage
element that references the SDD and the feature in the referenced SDD.
4.12.10.1 PackageFeatureReferenceType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
contentElementRef
|
xsd:IDREF
|
1
|
Reference
to a content element in the deployment descriptor.
|
|
packageFeatureRef
|
xsd:NCName
|
1
|
The
feature’s id as defined in the referenced package’s deployment descriptor.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.12.10.2 PackageFeatureReferenceType Property Usage Notes
§ contentElementRef:
This value MUST reference the id of a ContainedPackage element in
SelectableContent or BaseContent. This reference does not cause
the ContainedPackage to be in scope.
§ packageFeatureRef:
Specifies the value of the id of a feature element from the SDD of the ContainedPackage
identified in contentElementRef. This feature reference is ignored
when the ContainedPackage identified in contentElementRef is not
in scope for a particular deployment.
Figure 94: ConstrainedResourceType structure.
A resource may be required during deployment of the content
selected by a Feature instance. The requirement may exist because the
resource is used in a Requirement statement, referred to in a Variable
whose value is in scope for the particular deployment or referred to in a
constraint in a Condition that is satisfied for the particular
deployment. This is an in-scope, required resource for the particular
deployment. The SDD author may wish to constrain in-scope, required resources
to resolve to the same resource instance for all Feature instances or to
resolve to unique resource instances for each Feature instance. This is
done using a ConstrainedResource element.
4.12.11.1 ConstrainedResourceType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
resourceRef
|
xsd:IDREF
|
1
|
A
reference to the constrained resource.
|
|
constraintType
|
MultiplicityConstraintType
|
0..1
|
Indicates
whether the constraint requires every instance of the resource to be the same
or requires every instance to be different.
**default
value=“same”
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.12.11.2 ConstrainedResourceType Property Usage Notes
§ resourceRef:
The value MUST reference the id of a resource element in Topology.
§ constraintType:
If there is a constraint, constraintType indicates that all resource
instances be unique or that all resource instances be the same.
For example, all clients for a particular solution
may need to connect to the same database. In this case, constraintType
would be set to same. In other cases, each of the deployed resources might
need to use its own unique instance of a required resource. If there could be
only one client per operating system, a constraint on the operating system
resource would set constraintType to unique.
See the MultiplicityConstraintType section for
the enumeration values for constraintType [4.12.12].
This is a simple type that is used to indicate how resources
declared in the Multiplicity element should be treated. Enumeration
values are same, unique, or if a value is not specified, the SDD
author is indicating that it doesn’t matter.
4.12.12.1 MultiplicityConstraintType Property Usage Notes
§ same: The
value same is used to indicate that the constraint requires all resource
instances MUST be the same.
§ unique: The
value unique is used to indicate that each resource instance MUST be
unique.
Figure 95: RequiredContentSelectionType structure.
When one SDD aggregates another, there needs to be an
indication of which Groups and/or Features in the aggregated SDD
should be selected. The RequiredContentSelection of the referenced
package element identifies which elements MUST be selected when the defining
package is selected.
4.12.13.1 RequiredContentSelectionType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Group
|
xsd:token
|
0..1
|
A
reference to the group to be selected.
|
|
Feature
|
ContentSelectionFeatureType
|
0..*
|
A
reference to a feature to be selected.
|
4.12.13.2 RequiredContentSelectionType Property Usage Notes
§ Group: The Group
value is the identifier of a Group in the aggregated SDD. This value
MUST reference the id of a Group element in the deployment
descriptor denoted by the referenced package.
§ Feature: The Feature
element value is the identifier of the feature in the aggregated SDD.
Attributes indicating the number of selections to be made can be included. The feature
value MUST be the id of a feature element in the deployment descriptor
denoted by the referenced package.
If Group is also defined,
Feature SHOULD be a feature that is not selected by the Group.
See the ContentSelectionFeatureType
section for structure and additional usage details [4.12.14].
Figure 96: ContentSelectionFeatureType structure.
The ContentSelectionFeatureType allows for the
definition of the number of times a feature can be referenced if that feature
includes a Multiplicity element.
For example, a software package has a server and
client; the server can be deployed only on one machine, but the client can be
deployed on multiple machines and configured to reference the one server. The
server, for performance reasons, is limited to 10 client connections. To limit
the number of times the client can be deployed, the selections attribute
should be set to “10”.
4.12.14.1 ContentSelectionFeatureType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
|
[extends]
xsd:token
|
|
See
the xsd:token definition in [XSD].
|
|
selections
|
VariableExpressionType
|
0..1
|
The
number of times a feature with Multiplicity in the referenced package should
be deployed.
|
4.12.14.2 ContentSelectionFeatureType Property Usage Notes
See the xsd:token
definition in [XSD] for
inherited attributes and elements.
§ selections: The
value of selections MUST be, or resolve to, a positive integer that is
within the bounds of the minSelections and maxSelections attributes
defined in the Multiplicity element of the referenced feature.
See the VariableExpressionType section for
structure and additional usage details [4.6.1].
Figure 97: MultiSelectType structure.
MultiSelectType defines a way to associate features
with a defined minimum and maximum number of selections allowed. A MultiSelect
element MAY be used to support identification of mutually exclusive features.
4.12.15.1 MultiSelectType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Feature
|
FeatureReferenceType
|
2..*
|
A reference to a feature in the list of features
defined in the MultiSelect element.
|
|
minSelections
|
xsd:nonNegativeInteger
|
0..1
|
Minimum number of features that must be
selected.
**default value=“0”
|
|
maxSelections
|
xsd:positiveInteger
|
0..1
|
Maximum number of features that can be selected.
|
4.12.15.2 MultiSelectType Property Usage Notes
§ Feature: The
value MUST reference the id of a feature element.
See the FeatureReferenceType
section for structure and additional usage details [4.12.8].
§ minSelections,
maxSelections: When it is not necessary that any of the features in the MultiSelect
list be selected, the default of “0” can be used.
Mutually exclusive features can be defined using a MultiSelect
element with two features, minSelections set to “0” and maxSelections
set to “1”.
If multiple instances of a single feature are selected
via multiplicity, the set of multiple instances count only once toward the
minimum and maximum. In other words, the count is based solely on the features
selected, not on how many instances of each feature are selected.
When maxSelections is not defined, all of the
features in the MultiSelect MAY be selected for a particular deployment.
If defined, the maxSelections value MUST be
greater than or equal to the minSelections value and MUST be less than
or equal to the number of referenced features.
Localization refers to enabling a particular piece of
software to support one or more languages. Anything that needs to be deployed
to provide support for a particular language in that software is considered
localization content. Translated materials are a primary, but not the only,
example of localization content.
Localization content is similar in many ways to other
content, but there are important differences in how localization content is
selected for deployment that lead to the need for a separate content hierarchy
and separate types. Two criteria determine whether or not localization content
is in scope for a particular deployment:
§ The first criterion
has to do with the language or languages supported by the localization content.
At least one of the languages must be in scope for the content to be selected.
§ The second criterion
has to do with the availability of the resources to be localized–the
localization base. The localization base may be a resource deployed by base or
selectable content, or it may be a resource previously deployed and found in
the deployment environment.
The types described in this section support definition of
metadata describing the criteria for determining when localization content is
in scope.
Figure 98: LocalizationContentType structure.
The LocalizationContent tree contains all content
created specifically to provide localization by deploying language-specific
materials for a particular location. The localization support provided can be
for content defined in the SDD or it can be for resources in the deployment
environment that are not created or modified by deployment of the SDD. Each
element defined in the LocalizationContent hierarchy is in scope for a
particular deployment when it supports a language that is in scope for that
deployment and when its localization base, if any, is available.
4.13.1.1 LocalizationContentType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
LocalizationUnit
|
LocalizationUnitType
|
0..*
|
Contains
artifacts that create, modify or delete language support.
|
|
ContainedLocalizationPackage
|
ReferencedPackageType
|
0..*
|
Identifies
an SDD whose contents are aggregated to create, modify or delete language
support.
|
|
CompositeLocalizationUnit
|
CompositeLocalizationUnitType
|
0..*
|
An
organizational element that groups localization content and defines metadata
common to all the grouped content.
|
4.13.1.2 LocalizationContentType Property Usage Notes
§ LocalizationUnit:
When there is no need to group a LocalizationUnit with other units that
have common metadata, the LocalizationUnit is defined at the top level
of the hierarchy. A LocalizationUnit defined at the top level of the LocalizationContent
hierarchy is in scope for a particular deployment when its Condition and
LocalizationBase, if any, evaluate to true and its Languages
element, if any, defines a language that is in scope for the deployment.
See the LocalizationUnitType
section for structure and additional usage details [4.13.2].
§ ContainedLocalizationPackage:
ContainedLocalizationPackage definitions include a list of languages
supported by the contained package. The package need not be processed if none
of those languages is in scope for a particular deployment.
See the ReferencedPackageType
section for structure and additional usage details [4.10.1].
§ CompositeLocalizationUnit:
CompositeLocalizationUnit is a construct that allows organization of
localization content in a way that is meaningful to the SDD author.
One example use of a CompositeLocalizationUnit
is to group a set of LocalizationUnits that provide support for a
variety of languages for the same resource. This eliminates the need to define
identical LocalizationBase elements in every LocalizationUnit. It
can be defined once in the CompositeLocalizationUnit.
If evaluation of the CompositeLocalizationUnit's
Condition, Languages and LocalizationBase determines that
it is not selected for deployment, none of the content elements defined below
it in the hierarchy are selected.
Requirements, Variables,
Conditions and Completion elements common to all child content
elements MAY be defined once in the CompositeLocalizationUnit rather
than once in each nested element.
See the CompositeLocalizationUnitType
section for structure and additional usage details [4.13.3].
Figure 99: LocalizationUnitType structure.
The LocalizationUnit element defines artifacts that
deploy localization content for one group of resources whose translations are
packaged together. Localization content consists of materials that have been
translated into one or more languages.
4.13.2.1 LocalizationUnitType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Identity
|
IdentityType
|
0..1
|
Human-understandable
identity information about the LocalizationUnit.
|
|
Condition
|
ConditionType
|
0..1
|
A
condition that determines if the content element is relevant to a particular
deployment.
|
|
Variables
|
VariablesType
|
0..1
|
Variables
that can be referenced in the LocalizationUnit’s requirement and artifact
definitions.
|
|
RequiredBase
|
RequiredBaseType
|
0..1
|
A
resource that will be updated when the LocalizationUnit’s UpdateArtifact is
processed.
|
|
Requirements
|
RequirementsType
|
0..1
|
Requirements
that must be met prior to successful processing of the LocalizationUnit’s
artifacts.
|
|
Languages
|
LanguagesType
|
0..1
|
The
LocalizationUnit’s artifacts contain materials translated into these
languages.
|
|
Completion
|
CompletionType
|
0..*
|
Describes
completion actions such as restart and the conditions under which the action
is applied.
|
|
LocalizationBase
|
RequiredBaseType
|
0..1
|
A
resource whose translatable characteristics will be localized by processing
the LocalizationUnit’s InstallArtifact.
|
|
ResultingResource
|
ResultingResourceType
|
0..*
|
A
resource that will be installed or updated by processing the
LocalizationUnit’s artifacts.
|
|
Artifacts
|
InstallationArtifactsType
|
1
|
The
set of artifacts associated with the LocalizationUnit.
|
|
|
xsd:any
|
0..*
|
|
|
id
|
xsd:ID
|
1
|
An
identifier for the LocalizationUnit scoped to the deployment descriptor.
|
|
targetResourceRef
|
xsd:IDREF
|
1
|
Reference
to the resource that can process the LocalizationUnit’s artifacts.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.13.2.2 LocalizationUnitType Property Usage Notes
§ Identity: The Identity
element defines human-understandable information that reflects the identity of
the provided localization resources as understood by the end user of the
solution. Identity has elements that are common with elements in the
corresponding PackageDescriptor’s PackageIdentity element, for
example, Name and Version. The values of these common elements
SHOULD be the same as the corresponding PackageIdentity element values.
See the IdentityType section for structure and
additional usage details [3.4].
§ Condition: A Condition
is used when the LocalizationUnit’s content should be deployed only when
certain conditions exist in the deployment environment.
For example, for a package that has one artifact that
should be processed when the operating system is Linux and another artifact
that should be processed when the operating system is Windows, the LocalizationUnit
defining metadata for the Linux artifact would have a condition on the
operating system being Linux. The LocalizationUnit defining metadata for
the Windows artifact would have a condition on the operating system being
Windows.
Conditions should not be used to identify the
resource that will be localized by the LocalizationUnit. The LocalizationBase
element is used for that purpose. A LocalizationUnit can have both a Condition
and a LocalizationBase.
See the ConditionType section for structure and
additional usage details [4.5.1].
§ Variables: A
Variables element defines variables that can be used in the definition of
requirements and artifact parameters.
When the deployment descriptor
defines a single LocalizationUnit at the top level, that is, not inside
a CompositeInstallable, the variables it defines can also be referred to
in any element under Topology.
See the VariablesType section
for structure and additional usage details [4.6.3].
§ RequiredBase: RequiredBase
identifies the resource that must exist prior to applying the LocalizationUnit’s
update artifact.
See the RequiredBaseType section for structure
and additional usage details [4.7.8].
§ Requirements: Requirements
MUST be met prior to processing the LocalizationUnit’s artifacts.
See the RequirementsType section for structure
and additional usage details [4.7.1].
§ Languages: Languages
lists the languages of the translated material deployed by the LocalizationUnit.
See the LanguagesType section for structure and
additional usage details [4.13.6].
§ Completion: A Completion
element MUST be included if the artifact being processed requires a system
operation such as a reboot or logoff to occur to function successfully after
deployment or if the artifact executes a system operation to complete
deployment of the contents of the artifact.
There MUST be an artifact associated with the operation
defined by a Completion element.
For example, if there is a Completion element
for the install operation, the LocalizationUnit must define an InstallArtifact.
See the CompletionType section for structure
and additional usage details [4.3.14].
§ LocalizationBase:
LocalizationBase identifies the resource or resources that can be
localized by processing the LocalizationUnit. A resource that satisfies
the constraints defined in the LocalizationBase is one that can be
localized by applying the LocalizationUnit.
If no resource is found that meets the constraints
defined in LocalizationBase during a particular deployment, then the LocalizationUnit
is not considered to be in scope for that deployment. This does not represent
an error.
Translations created or modified by the LocalizationUnit
are for human-readable text included with the LocalizationBase
resources.
See the RequiredBaseType section for structure
and additional usage details [4.7.8].
§ ResultingResource:
The ResultingResources for a LocalizationUnit MUST NOT
identify resources other than localization resources.
See the ResultingResourceType section for
structure and additional usage details [4.8.1].
§ Artifacts: When
the LocalizationUnit is a singleton defined outside of a CompositeInstallable,
it MUST define at least one artifact element and MAY define one of each type of
artifact element allowed for its type. The inclusion of an artifact element in
a singleton LocalizationUnit implies support for the associated
operation.
When the LocalizationUnit is defined within a CompositeInstallable,
it MUST define exactly one artifact. The artifact defined MAY be any artifact
allowed in a LocalizationUnit and it MUST support the single top level operation
defined by the CompositeInstallable. This does not mean the operation
associated with the artifact has to be the same as the one defined by the CompositeInstallable.
For example, an install of a localization resource
may be required during the update of the overall solution, in which case the LocalizationUnit
would define an InstallArtifact to support the top level update
operation.
See the InstallationArtifactsType section for
structure and additional usage details [4.3.4].
§ id: The id
attribute may be useful to software that processes the SDD, for example, for
use in creating log and trace messages.
§ targetResourceRef:
The targetResourceRef attribute MUST reference the id of a resource
element in Topology that will process the LocalizationUnit’s
artifacts to create or modify the localization resources identified in the LocalizationUnit’s
ResultingResource elements.
Figure 100: CompositeLocalizationUnitType structure
CompositeLocalizationUnitType
provides the type definition for all CompositeLocalizationUnit elements
in the LocalizationContent hierarchy. CompositeLocalizationUnit
elements define nested localization content elements and metadata that applies
to all of the nested elements.
4.13.3.1 CompositeLocalizationUnitType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Identity
|
IdentityType
|
0..1
|
Human-understandable
identity information about the CompositeLocalizationUnit.
|
|
Condition
|
ConditionType
|
0..1
|
A
condition that determines if the CompositeLocalizationUnit is relevant to a
particular deployment.
|
|
Variables
|
VariablesType
|
0..1
|
Variables
for use within the CompositeLocalizationUnit and content elements nested
beneath it in the hierarchy.
|
|
RequiredBase
|
RequiredBaseType
|
0..1
|
A
resource that will be updated when the nested elements are processed.
|
|
Requirements
|
RequirementsType
|
0..1
|
Requirements
that must be met prior to successful processing of the nested content
elements.
|
|
Languages
|
LanguagesType
|
0..1
|
Localization
elements defined within CompositeLocalizationUnit contain materials
translated into these languages.
|
|
Completion
|
CompletionType
|
0..*
|
Describes
completion actions such as restart and the conditions under which the action
is applied.
|
|
LocalizationBase
|
RequiredBaseType
|
0..1
|
A
resource whose translatable characteristics will be localized by processing
the nested content elements.
|
|
ResultingResource
|
ResultingResourceType
|
0..*
|
A
localization resource that will be installed or updated by processing the
nested content elements.
|
|
LocalizationUnit
|
LocalizationUnitType
|
0..*
|
Contains
artifacts that will create, modify or delete language support.
|
|
ContainedLocalizationPackage
|
ReferencedPackageType
|
0..*
|
Identifies
an SDD whose contents are aggregated to create, modify or delete language
support.
|
|
CompositeLocalizationUnit
|
CompositeLocalizationUnitType
|
0..*
|
An
organizational element that groups localization content and defines metadata
common to all the grouped content.
|
|
|
xsd:any
|
0..*
|
|
|
id
|
xsd:ID
|
1
|
An
identifier for the CompositeLocalizationUnit that is unique within the
deployment descriptor.
|
|
|
xsd:anyAttribute
|
0..*
|
|
4.13.3.2 CompositeLocalizationUnitType Property Usage Notes
§ Identity: The CompositeLocalizationUnit,
like all content elements, is a unit of packaging. Its identity is the identity
of a unit of packaging and may be useful to package management tools. The
identity MAY be similar or identical to the identity of the ResultingResource(s).
See the IdentityType
section for structure and additional usage details [3.4].
§ Condition: If
the composite and the elements nested beneath it are applicable only in certain
environments, a Condition can be defined. When the Condition is
not met, the composite and its nested elements are not in scope.
See the ConditionType
section for structure and additional usage details [4.5.1].
§ Variables: Variables
used by more than one nested element can be defined in the CompositeLocalizationUnit
for efficiency both in composing and processing the SDD. Variables are
visible to all nested content elements.
See the VariablesType
section for structure and additional usage details [4.6.3].
§ RequiredBase:
If the processing of all the update artifacts in the nested content elements
results in a single resource being updated, that resource can be defined in the
CompositeLocalizationUnit’s RequiredBase element.
See the RequiredBaseType
section for structure and additional usage details [4.7.8].
§ Requirements:
When a CompositeLocalizationUnit is in scope for a particular deployment–as
determined by evaluation of its LocalizationBase and Languages
properties–then its requirements MUST be met.
See the RequirementsType
section for structure and additional usage details [4.7.1].
§ Languages: The
Languages element in the CompositeLocalizationUnit MUST NOT be
defined or MUST define the union of all languages supported by the nested
content elements. For nested content elements to be evaluated to determine if
they are in scope, the CompositeLocalizationUnit must be in scope. When Languages
is present in the CompositeLocalizationUnit, it must define one of the
languages in scope for the particular deployment if any of the nested elements
are to be evaluated. If Languages is not present in a CompositeLocalizationUnit,
evaluation of all the child elements still is required, as long as the other
elements of CompositeLocalizationUnit have evaluated to true. When the Languages
and/or the LocalizationBase element in a CompositeLocalizationUnit
is not defined, the nested content elements must be evaluated to determine if
they are in scope.
See the LanguagesType section for structure and
additional usage details [4.13.6].
§ Completion:
When a particular completion action applies to all nested elements and should
be performed only once for the entire group, it can be defined in the CompositeLocalizationUnit
rather than in each individual element.
See the CompletionType
section for structure and additional usage details [4.3.14].
§ LocalizationBase:
A LocalizationBase element evaluates to true when the resource
identified in the base is created by a content element that is in scope for the
deployment or it already exists in the deployment environment.
When the LocalizationBase
is defined it must evaluate to true for any of the nested content elements to
be evaluated. If it evaluates to false, none of the nested content elements are
in scope. If it evaluates to true, the nested content elements may be in scope.
When the LocalizationBase
and/or the Languages element in a CompositeLocalizationUnit is
not defined, the nested content elements must be evaluated to determine if they
are in scope.
See the RequiredBaseType
section for structure and additional usage details [4.7.8].
§ ResultingResource:
If there are one or more resources that will be created when the nested content
elements are processed, they can be defined here.
See the ResultingResourceType
section for structure and additional usage details [4.8.1].
§ LocalizationUnit:
LocalizationUnits defined within the composite typically have common
metadata. Metadata defined in the composite does not need to be repeated in the
nested element. Definitions in the nested LocalizationUnit are additions
to those defined in the composite.
See the LocalizationUnitType
section for structure and additional usage details [4.13.2].
§ ContainedLocalizationPackage:
A ContainedLocalizationPackage is defined in a CompositeLocalizationUnit
for the same reasons that a LocalizationUnit is–because it has metadata
in common with other elements defined in the composite.
See the ReferencedPackageType section for
structure and additional usage details [4.10.1].
§ CompositeLocalizationUnit:
A CompositeLocalizationUnit can be nested inside another CompositeLocalizationUnit
when some of the metadata is shared only by a subset of the elements nested in
the higher level composite.
For example, the higher level composite might contain
operating system requirements that apply to all localization content and nested
composites might group localization content by localization base.
§ id: This id
is not referred to by any other element in the deployment descriptor.
The id attribute may be useful to software that
processes the SDD, for example, for use in creating log and trace messages. It
also may be useful for associating custom discovery logic with the CompositeLocalizationUnit’s
resource-related elements.
Figure 101: LanguageSelectionsType structure.
LanguageSelectionsType provides the type definition
for the Languages element in CompositeInstallable that describes
the languages supported by the SDD as a whole. It also provides the type
definition for the Languages element in features that allows a feature
to override the SDD-wide definitions.
4.13.4.1 LanguageSelectionsType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Mandatory
|
LanguagesType
|
0..1
|
The
set of languages that will be deployed.
|
|
Optional
|
OptionalLanguagesType
|
0..1
|
The
set of language selections available to the deployer.
|
4.13.4.2 LanguageSelectionsType Property Usage Notes
§ Mandatory: The
deployer has no ability to determine if a mandatory language will be deployed.
See the LanguagesType
section for structure and additional usage details [4.13.6].
§ Optional: Each
language group in the list of optional languages defines a list of one or more
languages that can be selected together.
Language groups defined in LanguageSelections
MAY be used to allow the deployer to select individual languages or to allow
selection of multiple languages as a single choice.
See the OptionalLanguagesType
section for structure and additional usage details [4.13.5].
Figure 102: OptionalLanguagesType structure
OptionalLanguagesType supports definition of a
language or sets of languages that the deployer can optionally choose for
deployment. This type is used to define the global set of optional languages in
CompositeInstallable as well as any Feature-specific set that
overrides the global set for a particular Feature.
4.13.5.1 OptionalLanguagesType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Language
|
LanguageType
|
1..*
|
A
single language that can be chosen individually.
|
|
LanguageSet
|
LanguageSetType
|
1..*
|
A
set of languages that can be chosen together.
|
4.13.5.2 OptionalLanguagesType Property Usage Notes
§ Language: When
the SDD author allows the deployer to individually select a language for
deployment, it is defined in a Language element within OptionalLanguages.
See the LanguageType
section for structure and usage details [4.13.7].
§ LanguageSet: When
the SDD author allows the deployer to select languages for deployment as a set,
it is defined in a LanguageSet element within OptionalLanguages.
One example of a reason to define optional languages
in a set rather than individually is for a group of languages that are packaged
together and whose deployment cannot be separated.
See the LanguageSetType section for structure
and additional usage details [4.13.8].
Figure 103: LanguagesType structure.
LanguagesType supports expression of a list of
languages. It is used in the Languages elements of content elements to
list languages supported by that content element. It is also used as the type
of the Mandatory element that lists languages that are deployed by
default.
4.13.6.1 LanguagesType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
Language
|
LanguageType
|
1..*
|
A
single language definition.
|
4.13.6.2 LanguagesType Property Usage Notes
§ Language: Each
language definition MAY include display information as well as the language
code that identifies the language.
See the LanguageType
section for structure and additional usage details [4.13.7].
Figure 104: LanguageType structure.
LanguageType supports the definition of display
information and the language code for one language. It is used everywhere a
language is defined in the SDD.
4.13.7.1 LanguageType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
DisplayName
|
DisplayTextType
|
0..1
|
A
name for the language.
|
|
Description
|
DisplayTextType
|
0..1
|
A
description of the language.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
A
short description of the language.
|
|
type
|
xsd:language
|
1
|
The
locale code for the language.
|
4.13.7.2 LanguageType Property Usage Notes
§ DisplayName:
This element MAY be used to provide human-understandable information. If used,
it MUST provide a label for the language.
See the DisplayElementGroup section for
structure and additional usage details [4.14.2].
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the language.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DisplayElementGroup
section for structure and additional usage details [4.14.2].
§ type: The type
attribute MUST be defined as a value that conforms to the set of
language codes defined by [RFC3066].
For example, “de” is a locale code for German and
“en-US” is the locale code for English in the United States.
Figure 105: LanguageSetType structure.
LanguageSetType
provides the type definition for the OptionalLanguages elements of CompositeInstallable
and Feature. It defines a set of languages that can be selected together.
4.13.8.1 LanguageSetType Property Summary
|
Name
|
Type
|
*
|
Description
|
|
DisplayName
|
DisplayTextType
|
0..1
|
A
name for the set of languages.
|
|
Description
|
DisplayTextType
|
0..1
|
A
description of the set of languages.
|
|
ShortDescription
|
DisplayTextType
|
0..1
|
A
short description of the set of languages.
|
|
Language
|
LanguageType
|
1..*
|
A set
of one or more language codes.
|
4.13.8.2 LanguageSetType Property Usage Notes
§ DisplayName:
This element MAY be used to provide human-understandable information. If used,
it MUST provide a label for the set of languages.
For example,
“Eastern European Languages” or “French, English and German”.
See the DisplayElementGroup section for
structure and additional usage details [4.14.2].
§ Description,
ShortDescription: These elements MAY be used to provide
human-understandable information. If used, they MUST provide a description of
the set of languages.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DisplayElementGroup
section for structure and additional usage details [4.14.2].
§ Language: The
languages defined in this element MUST be selected together.
See the LanguageType
section for structure and additional usage details [4.13.7].
4.14 Display
Information
There are many places throughout the SDD where translatable
information intended for display to humans MAY be defined. All display
information definitions can include a translationKey that can be used as
an index into a file containing translations.
Figure 106: DescriptionGroup structure.
The DescriptionGroup type is used throughout the SDD
to provide human-readable, translatable, descriptive-text elements.
4.14.1.1 DescriptionGroup Property Usage Notes
§ Description:
This is a description of the defining element unless usage notes for that
element state otherwise. It can be as long as necessary to provide a useful
description.
The Description element
MUST be defined if the ShortDescription element is defined.
See the DisplayTextType
section for details about associating this text with translated text [4.14.3].
§ ShortDescription:
This is a short description of the defining element unless usage notes for that
element state that it refers to something else. It SHOULD provide a limited
description that can be used by tools where limited text is allowed, for
example, fly-over help.
See the DisplayTextType section for details about
associating this text with translated text [4.14.3].
Figure 107: DisplayElementGroup structure.
The DisplayElementGroup is used throughout the package
descriptor and deployment descriptor to provide human-readable, translatable
names, descriptions and/or short descriptions for a variety of elements.
4.14.2.1 DisplayElementGroup Property Usage Notes
§ DisplayName:
This is a label for the defining element unless usage notes for that element
state otherwise.
See the DisplayTextType section for details about
associating this text with translated text [4.14.3].
Figure 108: DisplayTextType Structure.
Elements of DisplayTextType define translatable
strings and an optional key to translated text in language bundle files. DisplayTextType
extends the xsd:string type with an optional translationKey
attribute.
4.14.3.1 DisplayTextType Property Usage Notes
§ translationKey: The translationKey attribute is a value that
can be used as an index into a file containing translations of DisplayTextType
elements in the DeploymentDescriptor and/or PackageDescriptor. The
value of the translationKey MUST match an entry in the message bundle
referenced by the descriptorLanguageBundle attribute in the package
descriptor.
An implementation MAY claim conformance to the entirety of
the SDD specification (including all conformance levels) or one or more
particular conformance levels, and/or one or more particular profiles (SDD
conformance levels and profiles are detailed next).
An SDD conformance level (CL) is defined, consistent with [CONFORM], as a subset of the schema intended to
enable a certain set of capabilities to be achieved, based on SDDs that
restrict their content to the particular CL. The purpose of conformance levels
is to allow subsets of the full set of capabilities that can be expressed using
an SDD to be implemented. The proper subsets are expected to be easier to
implement, but still offer features, value and interoperability that make it
worthwhile to implement a particular CL in certain circumstances.
SDD conformance levels are designated as CL1 and CL2. CL1 is
a proper subset of the schema; CL2 represents the full schema. CL1 is the
minimal set or core of the specification that shall be implemented by all
products. CL2 includes all of CL1 and consists of the entire specification.
The following sections describe the defined CLs for SDD.
Table 1 expresses the capabilities for each defined CL.
|
|
Conformance Level 1
|
Conformance Level 2
|
|
Description
|
Single target, simple package.
|
Multi-target, aggregated packages; full deployment
capabilities with all functions enabled by the SDD schema.
|
|
Objective
|
Serve as the “on-ramp” for SDD adoption. Deploy
pre-prepared content that needs limited customization (basic parameters).
Descriptors serve as contract between assembly and operations. Exemplary use
case is “wrappering” existing packages in SDD.
|
Serve as the expected level for newly-authored non-legacy
SDDs. Deploy newly-prepared content that has related components in a
solution, with various topologies. Most robust specification (and
corresponding run-time implementations) of SDD. Exemplary use case is
non-trivial, non-legacy solution deployment.
|
|
Included Schema Functions
|
·
Solution package with single component (singleton IU, CU, or
LU; no composite) and single target topology
·
Solution package dependency checking for given environment
·
base installations and maintenance
·
Simple uninstall (based on information in single descriptor)
·
Ability to deploy existing artifact formats appropriate for the
target environment
·
Some localization possible (localization of the units that are
supplied)
|
All functions,
including:
·
Aggregation (composites)
·
Features
·
Selectable features
·
Conditional content
·
Variable-target topology
·
Robust localization
|
|
Excluded Functions
|
·
Features
·
Selectable content
·
Requisites
·
Aggregation
·
Multi-target topology
·
Robust localization
·
Replacements and modifications that change base
resource/solution composition (including obsolescence)
·
Backwards compatibility, range enforcement
·
Verification of installation and configuration
|
None
|
Table 1: SDD conformance level
capabilities summary.
CL1 SDDs can be used to describe
the inputs, requirements and results of processing a single deployment
artifact. This artifact could be one that deploys, updates, configures or
localizes software resources. This is useful for simple deployments that
require only a single artifact. CL2 SDDs add support for aggregation of
multiple artifacts and SDDs into solutions; definition of features that
optionally select content; and requisite software that can be deployed if
needed to satisfy requirements. CL1 SDDs can be aggregated by CL2 SDDs.
For
example, CL2 SDDs can describe a solution that consists of a Web server, an
application server, a database and one or more applications, in which each of
these components is described by its own individual SDD and an aggregating CL2
SDD aggregates them into the composite solution.
The differences between CL1 and CL2 that are summarized in Table 1 are detailed next. These make use of the information that is in the SDD
schema; see [CL1_Schema] for
the CL1 schema files, and [CL2_Schema]
for the CL2 schema files. The differences between the CL1 and CL2 schema files
are isolated to the “sdd-dd” namespace. The “sdd-common” and “sdd-pd”
namespaces contain identical schema files for each namespace with respect to
CL1 and CL2.
5.2.2.1 Type Definitions Modified in CL2
A few SDD types used in CL1 have additional elements added
in CL2. The types listed in the left column of Table 2 exist in both CL1 and
CL2 with different definitions. The elements in the right column are the
sub-elements added to the type definitions in CL2.
|
Type Name
|
CL2 Sub-Element Names
|
|
DeploymentDescriptorType
|
Requisites
CompositeInstallable
|
|
InstallationArtifactsType
|
RepairArtifact
|
|
ResultingResourceType
|
Relationship
|
|
ResultingChangeType
|
Relationship
|
|
ResourceConstraintGroup
|
UniquenessConstraint
RelationshipConstraint
|
|
ConditionalResourceConstraintType
|
UniquenessConstraint
RelationshipConstraint
|
|
RequirementType
|
Dependency
|
|
AlternativeRequirementType
|
Dependency
|
Table
2. Modified Types.
Several SDD types have altered structure between CL1 and
CL2. The types listed in the left column of Table 3 are valid for both CL1 and
CL2; however, valid structure for these types differs between CL1 and CL2, as
shown in the center and right columns.
|
Type
|
CL1 Structure
|
CL2 Structure
|
|
DeploymentDescriptorType
|
Choice of one of the following: InstallableUnit, ConfigurationUnit,
or LocalizationUnit
|
Choice of one of the following: InstallableUnit, ConfigurationUnit,
or LocalizationUnit;
or one or more
CompositeInstallable
elements
|
|
RequirementType
|
Sequence of ResourceConstraint elements
|
Unbounded choice of ResourceConstraint elements and
Dependency elements
|
|
AlternativeRequirementType
|
Sequence of ResourceConstraint elements
|
Unbounded choice of ResourceConstraint elements and
Dependency elements
|
Table 3. Altered types in CL2.
As seen in Table 2, CL2 adds two new elements to DeploymentDescriptor.
The CompositeInstallable element provides the definition of an aggregate
deployment. CompositeInstallable is a complex element with many
sub-elements. The second element added to DeploymentDescriptor is Requisites.
Requisites is a list of references to SDDs that can be used, if needed,
to satisfy deployment requirements defined in the CompositeInstallable.
Table 4 includes the CL2 types that are introduced in
support CompositeInstallable and Requisites
|
BaseContentType
|
FeatureType
|
PackageFeatureReferenceType
|
|
CompositeInstallableType
|
GroupsType
|
ReferencedPackageType
|
|
CompositeLocalizationType
|
GroupType
|
RelationshipConstraintType
|
|
CompositeUnitType
|
InternalDependencyType
|
RelationshipType
|
|
ConstrainedResourceType
|
LanguageSelectionType
|
RequiredContentSelectionType
|
|
ContentElementReferenceType
|
LocalizationContentType
|
RequisitesType
|
|
ContentListGroup
|
MultiplicityConstraintType
|
ResourceMapType
|
|
ContentSelectionFeatureType
|
MultiplicityType
|
ResultingChangeMapType
|
|
DependencyType
|
MultiSelectType
|
ResultingResourceMapType
|
|
FeatureReferenceType
|
NestedFeatureType
|
SelectableContentType
|
|
FeaturesType
|
OptionalLanguagesType
|
UniquenessConstraintType
|
Table 4 SDD types introduced in CL2.
One SDD type has an additional enumeration value that is
valid only for CL2-based implementations. The type listed in the left column of
Table 5 is valid for both CL1 and CL2; however, the value in the right column
is valid only for CL2.
|
Type
|
CL2 Enumeration Value
|
|
OperationType
|
repair
|
Table 5 Extended enumeration value in CL2.
Profiles are intended to specify detailed information that
can be used in an SDD to promote interoperability. An SDD profile is defined
consistent with [CONFORM], to identify
the functionality, parameters, options and/or implementation requirements
necessary to satisfy the requirements of a particular community of users. SDD
profiles are intended to enable a specific set of use cases, typically in a
particular domain. Profiles are considered largely orthogonal to CLs; whereas a
CL is a subset of the schema, a profile specifies the usage of the schema,
including appropriate conventions and content values, to accomplish a particular
set of use cases (typically in a particular domain).
A starter profile is initially defined with version
1.0 of this specification and is published separately. This starter profile
defines terms and patterns that can be used to generate other specific profiles
and addresses the content values that are required to support the SDD XML
examples that also are published separately.
The starter profile is not intended to be a complete
vocabulary for all SDDs, but rather to illustrate the format and provide example
content so that additional profiles can be generated in the future. The starter
profile leverages and extends the CIM standard [CIM]
for many content values, but other profiles MAY use other content values.
Other profiles MAY be published by the TC in the future, and
new profiles can be created as specified in 5.3.1.
An implementation MAY claim conformance to one or more
particular profiles.
The SDD TC has created a starter profile as described in 5.3. The SDD TC MAY create additional profiles in the future.
Others MAY create SDD profiles for use cases, domains, or user
communities that are not addressed by the currently available profiles from the
SDD TC. When creating new profiles, it is RECOMMENDED that profile creators
follow the model of the starter profile and any existing profiles and reuse
content from existing standards where possible. It is also RECOMMENDED that
implementations publish the profile(s) that they support.
The SDD TC publishes the starter profile and MAY publish any
other profiles created by the SDD TC.
Profiles created by the SDD TC SHALL be made available by
the SDD TC.
Profiles created by others MAY be published and made
available by those parties and/or submitted to the SDD TC for consideration for
publication by the SDD TC, according to the OASIS policies and procedures,
including intellectual property rights. The SDD TC MAY publish and make
available the new profiles through majority vote of the TC.
Profiles are applicable to particular usage models, domains
and/or user communities. An implementation MAY claim conformance to one or more
particular profiles.
Versions of the specification use the version value defined
in the schemaVersion attribute described in section 3.2. New versions of the specification MAY update the conformance level contents.
Profiles also use the schemaVersion attribute described
in section 3.2. New versions of profiles MAY update the profile contents.
Minor version updates of the schema, specification and
profiles SHALL be backward-compatible with proceeding major versions (for
example, all “1.x” versions are backward-compatible with version “1.0”).
Moreover, minor version updates of the schema, specification
and profiles SHALL be backward-compatible with proceeding minor versions of the
same major version (for example, version “1.4” is backward-compatible with
versions “1.3”, “1.2”, “1.1” and “1.0”).
Major version updates of the schema, specification and
profiles are NOT REQUIRED to be backward-compatible with previous versions and
MAY NOT be backward-compatible with previous versions. For example, if
non-backward-compatible changes occur in version “1.x”, the new version is
“2.0”. Although new major versions MAY have substantial backward compatibility,
backward compatibility is not guaranteed for all aspects of the schema across
major versions.
An SDD conforms to this specification if it conforms to the
SDD schema and follows the syntax and semantics defined in the normative
portions of this specification. An SDD MAY conform to conformance levels CL1 or
CL2.
An implementation conforms to this specification if it
conforms to, at minimum, conformance level CL1 of the SDD schema; supports at
least one SDD profile; and follows the syntax and semantics defined in the
normative portions of this specification. An implementation MAY support
conformance levels CL1 or CL2 and MAY support additional SDD profiles.
This section is the conformance claim for how this document
conforms to [CONFORM]. The conformance
issues in section 8 of [CONFORM] apply
to this document as follows:
1.
This document is applicable to SDDs as defined in this specification. To
claim conformance to this document, all the requirements in section 5.5.1 SHALL
be met.
2.
This document MAY be implemented in its entirety or in defined
conformance levels CL1 and CL2. This document does not define profiles, but the
SDD TC MAY define profiles that MAY be implemented.
3.
This document allows extensions. Each implementation SHALL fully support
all required functionality of the specification exactly as specified. The use
of extensions SHALL NOT contradict nor cause the non-conformance of
functionality defined in the specification.
4.
This document contains no discretionary items.
5.
This document’s normative language is English. Translation into other
languages is permitted.
The SDD schema is implemented by multiple schema files.
Types defined in each file are identified by a specific namespace prefix, as
indicated in the following list:
§ cd04-sdd-common-1.0.xsd
(prefix: sdd-common)
Contains definitions of common types used in the SDD
specification, including identity and fix-identity types, UUID and version
types, and the display text type.
http://docs.oasis-open.org/sdd/v1.0/cs01/CL1Schema/cs01-sdd-common-1.0.xsd
http://docs.oasis-open.org/sdd/v1.0/cs01/FullSchema/cs01-sdd-common-1.0.xsd
§ cd04-sdd-deploymentDescriptor-1.0.xsd
(prefix: sdd-dd)
Contains the deployment descriptor specification,
including various content types.
http://docs.oasis-open.org/sdd/v1.0/cs01/CL1Schema/cs01-sdd-deploymentDescriptor-1.0.xsd
http://docs.oasis-open.org/sdd/v1.0/cs01/FullSchema/cs01-sdd-deploymentDescriptor-1.0.xsd
§ cd04-sdd-packageDescriptor-1.0.xsd
(prefix: sdd-pd)
Contains the package descriptor specification,
including types related to packages and files.
http://docs.oasis-open.org/sdd/v1.0/cs01/CL1Schema/cs01-sdd-packageDescriptor-1.0.xsd
http://docs.oasis-open.org/sdd/v1.0/cs01/FullSchema/cs01-sdd-packageDescriptor-1.0.xsd
Example SDDs
showing the use of the schema can be found at the following address.
http://docs.oasis-open.org/sdd/v1.0/sdd-examples-v1.0.zip
The following individuals have participated in the creation
of this specification and are gratefully acknowledged:
Participants:
Dr. Howard Abrams, CA
Mr. Joshua Allen, Macrovision Corporation
Mr. Rich Aquino, Macrovision Corporation
Mr. Lazar Borissov, SAP AG
Ms. Debra Danielson, CA
Mr. Robert DeMason, SAS Institute, Inc.
Mr. Robert Dickau, Macrovision Corporation
Mr. Quenio dos Santos, Macrovision Corporation
Mrs. Christine Draper, IBM
Mr. Adrian Dunston, SAS Institute, Inc.
Mr. James Falkner, Sun Microsystems
Mr. Keisuke Fukui, Fujitsu
Limited
Mr. Randy George, IBM
Mr. Nico Groh, SAP AG
Mr. Frank Heine, SAP
AG
Ms. Merri Jensen, SAS
Institute, Inc.
Dr. Hiro Kishimoto,
Fujitsu Limited
Mr. Thomas Klink, SAP
AG
Mr. Jason Losh, SAS
Institute, Inc.
Ms. Julia McCarthy,
IBM
Mr. Art Middlekauff,
Macrovision Corporation
Mr. Brent Miller, IBM
Mr. Ed Overton, SAS
Institute, Inc.
Mr. Chris Robsahm, SAP
AG
Dr. David Snelling,
Fujitsu Limited
Mr. Thomas Studwell,
Dell
Dr. Weijia (John)
Zhang, Dell
