1 Introduction

1.1 Purpose/Scope

This Organization for the Advancement of Structured Information Standards (OASIS) Biometric Identity Assurance Services (BIAS) profile specifies how to use the eXtensible Markup Language (XML) [XML10] defined in ISO/IEC 30108-1:2015, Information technology — Biometric Identity Assurance Services [ISO/IEC-BIAS] to invoke Simple Object Access Protocol (SOAP) -based services that implement BIAS operations. These SOAP-based services enable an application to invoke biometric identity assurance operations remotely in a Services Oriented Architecture (SOA) infrastructure.

Not included in the scope of BIAS is the incorporation of biometric authentication as an integral component of an authentication or security protocol. (However, BIAS services may be leveraged to implement biometric authentication in the future.)

1.2 Overview

In addition to this introduction, this standard includes the following:

· Clause 2 presents the design concepts and architecture for invoking SOAP-based services that implement BIAS operations.

· Clause 3 presents the namespaces necessary to implement this profile, ISO/IEC BIAS data elements, and identifies relationships to external data definitions.

· Clause 4 specifies the content of the BIAS messages.

· Clause 5 presents the BIAS message structure, as well as rules and considerations for its application.

· Clause 6 presents information on error handling.

· Clause 7 specifies conformance requirements.

· Annexes include the OASIS BIAS XML schema/sample Web Service Definition Language (WSDL), use cases, sample code, acknowledgements, and the revision history of this profile.

1.3 Background

In late 2005/early 2006, a gap was identified in the existing biometric standards portfolio with respect to biometric services. The Biometric Identity Assurance Services standard proposal was for a collaborative effort between government and private industry to provide a services-based framework for delivering identity assurance capabilities, allowing for platform and application independence. This standard proposal required the attention of two major technical disciplines: biometrics and service architectures. The expertise of both disciplines was required to ensure the standard was technically sound, market relevant, and achieved widespread adoption. The International Standards Organization and the International Electrotechnical Commission (ISO/IEC) provided the standards leadership relevant to biometrics, defining the “taxonomy” of biometric operations and data elements. OASIS provided the standards leadership relevant to service architectures with an initial focus on web services, defining the schema and SOAP messaging.

The driving requirements of the BIAS standard proposal were to provide the ability to remotely invoke biometric operations across an SOA infrastructure; to provide business level operations without constraining the application/business logic that implements those operations; to be as generic as possible – technology, framework, & application domain independent; and to provide basic capabilities that can be used to construct higher level, aggregate/composite operations.

1.4 Relationship to Other Standards

This OASIS BIAS profile comprises a companion standard to ISO/IEC 30108-1:2015, Information technology — Biometric Identity Assurance Services, which defines the BIAS requirements and taxonomy, specifying the identity assurance operations and the associated data elements. This OASIS BIAS profile specifies the design concepts and architecture, data model and data dictionary, message structure and rules, and error handling necessary to invoke SOAP-based services that implement BIAS operations.

Together, the BIAS standard and the BIAS profile provide an open framework for deploying and remotely invoking biometric-based identity assurance capabilities that can be readily accessed across an SOA infrastructure.

This relationship allows the leveraging of the biometrics and web services expertise of the two standards development organizations. Existing standards are available in both domains and many of these standards will provide the foundation and underlying capabilities upon which the biometric services depend.

1.5 Terminology

The key words “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “MAY”, and “OPTIONAL” in this document are to be interpreted as described in [RFC2119].

The following additional terms and definitions are used:

Note: The terms and definitions specified in ISO/IEC 30801-1 [ISO/IEC-BIAS] also apply to this Standard.

BIAS operation and data element names are not defined here, but in their respective sections.

BIAS

Biometric Identity Assurance Services

BIR

Biometric Information Record

ESB

Enterprise Service Bus

HTTP

HyperText Transfer Protocol

HTTPS

HyperText Transfer Protocol over SSL or HTTP Secure

IRI

Internationalized Resource Identifier

SOA

Service-Oriented Architecture

SOAP

Simple Object Access Protocol

SSL

Secure Sockets Layer

TLS

Transport Layer Security

UDDI

Universal Description, Discovery, and Integration

URI

Uniform Resource Identifier

VPN

Virtual Private Network

WSDL

Web Services Description Language

WSS

Web Services Security

XML

eXtensible Markup Language

CBEFF

Common Biometric Exchange Formats Framework - data elements and BIR formats specified in ISO/IEC 19785-1

BIAS implementation

software entity that is capable of creating, processing, sending, and receiving BIAS messages

BIAS endpoint

runtime entity, identified by an endpoint URI/IRI, capable of sending and receiving BIAS messages, and containing a running BIAS implementation

BIAS message

message that can be sent from a BIAS endpoint to another BIAS endpoint through a BIAS link channel

BIAS request message

BIAS message conveying a request for an action to be performed by the receiving BIAS endpoint

BIAS response message

BIAS message conveying a response to a prior BIAS requestmessage

1.6 References

1.6.1 Normative References

[RFC2119] S. Bradner, Key words for use in RFCs to Indicate Requirement Levels, IETF RFC 2119, March 1997
http://www.ietf.org/rfc/rfc2119.txt

[CBEFF] ISO/IEC19785-1:2006, Information technology – Common Biometric Exchange Formats Framework – Part 1: Data element specification, with Amendment 1:2010
http://www.iso.org

[CBEFF-3] ISO/IEC19785-3:2015, Information technology – Common Biometric Exchange Formats Framework – Part 3: Patron format specifications
http://www.iso.org

[DATE-TIME] ISO 8601:2004, Data elements and interchange formats — Information interchange — Representation of dates and times
http://www.iso.org

[INCITS-BIAS] ANSI INCITS 442-2010, Biometric Identity Assurance Services (BIAS), July 2010
http://www.incits.org

[IRI] M. Duerst, et al, Internationalized Resouce Identifiers, RFC3987, January 2005
http://www.ietf.org/rfc/rfc3987.txt

[ISO/IEC-BIAS] ISO/IEC 30108-1:2015, Information technology — Biometric Identity Assurance Services — Part 1: BIAS Services
http://www.iso.org

[SOAP11] Simple Object Access Protocol (SOAP) 1.1, 8 May 2000
http://www.w3.org/TR/2000/NOTE-SOAP-20000508/

[URI] T. Berners-Lee, R. Fielding, L. Masinter, Uniform Resource Identifiers (URI): Generic Syntax, RFC 3986, MIT/LCS, U.C. Irvine, Xerox Corporation, January 2005.
http://ietf.org/rfc/rfc3986

[UTF-8] ISO/IEC 10646:2003, Information technology — Universal Multiple-Octet Coded Character Set (UCS)
http://www.iso.org

[WS-Addr] W3C Recommendation,Web Services Addressing 1.0 - Core, and Web Services Addressing 1.0 - SOAP Binding, 9 May 2006
http://www.w3.org/2002/ws/addr/

[WS-I-Basic] Basic Profile Version 1.1, 10 April 2006
http://www.ws-i.org/Profiles/BasicProfile-1.1-2006-04-10.html

[WS-I-Bind] Web Services-Interoperability Organization (WS-I) Simple SOAP Binding Profile Version 1.0, 24 August 2004
http://www.ws-i.org/Profiles/SimpleSoapBindingProfile-1.0-2004-08-24.html

[WSDL11] Web Services Description Language (WSDL) 1.1, 15 March 2001
http://www.w3.org/TR/2001/NOTE-wsdl-20010315

[XML 10] Extensible Markup Language (XML) 1.0, 16 August 2006
http://www.w3.org/TR/2006/REC-xml-20060816/

[XOP] XML-binary Optimized Packaging, W3C Recommendation, 25 January 2005
http://www.w3.org/TR/2005/REC-xop10-20050125/

1.6.2 Non-Normative References

[BioAPI] ISO/IEC 19784-1:2006, Information technology – Biometric Application Programming Interface – Part 1: BioAPI Specification
http://www.iso.org

[BIO SEC] ISO 19092 Financial services -- Biometrics -- Security framework
http://www.iso.org

[EBTS-DOD] Department of DefenseElectronic Biometric TransmissionSpecification, Version 2.0, 27 March 2009
http://www.biometrics.dod.mil/CurrentInitiatives/Standards/dodebts.aspx

[EBTS-FBI] IAFIS-DOC-01078-8.1, “Electronic Biometric Transmission Specification (EBTS)”, Version 8.1, November 19, 2008, Federal Bureau of Investigation, Criminal Justice Information Services Division
https://www.fbibiospecs.org

[EFTS] IAFIS-DOC-01078-7, “Electronic Fingerprint Transmission Specification (EFTS)”, Version 7.1, May 2, 2005, Federal Bureau of Investigation, Criminal Justice Information Services Division
https://www.fbibiospecs.org

[HR-XML] HR-XML Consortium Library, 2007 April 15
http://www.hr-xml.org

[INT-I] Interpol Implementation of ANSI/NIST ITL1-2000, Ver 4.22b, October 28, 2005, The Interpol AFIS Expert Group
http://www.interpol.int

[NIEM] National Information Exchange Model (NIEM), Ver 2.0, June 2007, US DOJ/DHS
BIAS-v2.0-csprd01.docx

[RFC2246] T. Dierks & C. Allen,The TLS Protocol, Version 1.0, January 1999
http://www.ietf.org/rfc/rfc2246.txt

[RFC2617] J. Franks, et al, HTTP Authentication: Basic and Digest Access Authentication, June 1999
http://www.ietf.org/rfc/rfc2617.txt

[RFC3280] R. Housley, et al, Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile, April 2002
http://www.ietf.org/rfc/rfc3280.txt

[SAML] Security Assertion Markup Language (SAML), Oasis Standard, March 2005
http://docs.oasis-open.org/security/saml/v2.0/saml-core-2.0-os.pdf

[SAML SEC] Security and Privacy Considerations for the OASIS Security Assertion Markup Language (SAML) V2.0, Oasis Standard, 15 March 2005
http://docs.oasis-open.org/security/saml/v2.0/saml-sec-consider-2.0-os.pdf

[SSL3] SSL 3.0 Specification
http://www.freesoft.org/CIE/Topics/ssl-draft/3-SPEC.HTM

[WSS] Web Services Security: SOAP Message Security 1.1, (WS-Security 2004), OASIS Standard Specification, 1 February 2006
http://www.oasis-open.org/committees/download.php/16790/wss-v1.1-spec-os-SOAPMessageSecurity.pdf

[X509] X.509: Information technology - Open Systems Interconnection - The Directory: Public-key and attribute certificate frameworks, ITU-T, August 2005
http://www.itu.int/rec/T-REC-X.509-200508-I

[xNAL] Customer Information Quality Specifications Version 3.0: Name (xNL), Address (xAL), Name and Address (xNAL) and Party (xPIL), Committee Specification 02, 20 September 2008
http://www.oasis-open.org/committees/tc_home.php?wg_abbrev=ciq

2 Design Concepts and Architecture (non-normative)

2.1 Philosophy

Rather than define a totally new and unique messaging protocol for biometric services, this specification instead defines a method for using existing biometric and Web services standards to exchange biometric data and perform biometric operations.

2.2 Context

Today, biometric systems are being developed which collect, process, store and match biometric data for a variety of purposes. In many cases, data and/or capabilities need to be shared between systems or systems serve a number of different client stakeholders. As architectures move towards services-based frameworks, access to these biometric databases and services is via a Web services front-end. However, lack of standardization in this area has led implementers to develop customized services for each system/application.

BIAS is intended to provide a common, yet flexible, Web services interface that can be used within both closed and open SOA systems. Figure 1, below, depicts the context in which the BIAS messages will be implemented.

Figure 1. BIAS Context

The clients (requesters) may use standard discovery mechanisms (i.e., UDDI directories) to discover the BIAS service provider (implementation) or, particularly in closed systems, the URI/IRI and WSDL for the service provider may be known a priori by the client BIAS application developer.

2.3 Architecture

BIAS Web services are intended to be used within systems employing a services framework, such as a services-oriented architecture (SOA) (although implementations are not limited to this environment). As such, it is recognized that the clients may interact directly with the BIAS service provider or layers may exist between the client and the service provider, for example as an ESB or other application layer.

The BIAS Architecture as shown in Figure 2, in which:

· A Client request to the BIAS Web services may be triggered by a human interaction OR any proxy system such as an ESB.

· Client sends and receives SOAP messages that conform to the BIAS schemas

· Calls to the BIAS Implementation use OASIS Service Interfaces and Bindings (via WSDL)

· The BIAS implementation maps the service call to the appropriate internal API or set of APIs and returns data according to the service interface.

Note that services are represented as circles.

Figure 2. Representative BIAS Architecture

NOTE: It is possible that BIAS may also be used between the service provider and the managed resource (e.g., a biometric matcher).

At the heart of the BIAS SOAP Profile are the concepts of BIAS messages and endpoints.

BIAS implementation

A BIAS implementation is a software entity that is capable of creating, processing, sending, and receiving BIAS messages. This standard does not define requirements for the BIAS implementation other than defining the messages and protocols used by the endpoints.

BIAS messages

A BIAS message is a one that can be sent from a BIAS endpoint to another BIAS endpoint over a TCP/IP link.

BIAS endpoints

A BIAS endpoint is a runtime entity, uniquely identified and accessed by an endpoint URI/IRI [URI] [IRI], capable of sending and receiving BIAS messages.

NOTE: When not publicly and directly exposed, the endpoints for purposes of this specification are the BIAS service provider exposing BIAS services and the component that directly interacts with that service provider, e.g., the business application or ESB, rather than the ultimate end client requester.

3 Data Dictionary

This section describes the BIAS data elements used within BIAS messages (as defined in Clause 4). Common data elements are defined for use in one or more operations. These include common data types or return codes. BIAS data elements are defined in ISO/IEC 30108-1. The elements, complex types and simple types described for the BIAS messages belong to the following namespace: http://docs.oasis-open.org/bias/ns/bias-2.0/. See Annex A for the XML schema.

NOTE: Biographic and biometric data included in a native XML format MAY contain elements referencing external namespaces (e.g., ansi-nist).

3.1 Documentation Conventions

Each common element has a section describing its content. Likewise, each operation has a section describing the request and response messages and the associated input and output parameters. The input and output of each message and the comment elements are detailed in a table as described in the figure below. Each field that forms part of the message request/response is detailed in the table.

Header Name	Description	Values	Value Meaning
Field	The name of the field.
Type	The XML schema type of the field.
#	The cardinality of the field	1	One occurrence
		0..1	Zero or one occurrence
		0..*	Zero or more occurrences
		1..*	One or more occurrences
?	Defines if the field must be present.	Y	Yes – is always required
		N	No – is not always required, an optional field.
		C	Conditional – requirement is dependent on system or message conditions.
Meaning	Gives a short description of the field’s use

Figure 3. BIAS Message Input/Output Dictionary Table Headings

Fields Hierarchy Explained:

To denote the field hierarchy the symbol is used to denote the child-of relationship.

All string types/elements MUST consist of ISO/IEC 10646 (Unicode) characters encoded in UTF-8 [UTF-8] (see ISO/IEC 10646:2003, Annex D).

3.2 Common Elements

3.2.1 ApplicationIdentifier

Type:	string
Description:	Identifies an application.
Min Length:	1
Max Length:	255

3.2.2 ApplicationUserIdentifier

Type:	string
Description:	Identifies an application user or instance.
Min Length:	1
Max Length:	255

3.2.3 BaseBIRType

Type:	Schema complexType
Description:	Base type for all BIR subtypes; see BinaryBIR, URI_BIR, and XML_BIR for currently available types.

3.2.4 BIASBiometricDataType

Field	Type	#	?	Meaning
BIASBiometricDataType			Y	Wraps the various BIAS biometric types. The operations that use this type specify which elements are required.
BIRList	CBEFF_BIR_ListType	0..1	N	A list of CBEFF-BIR elements.
BIR	CBEFF_BIR_Type	0..1	N	Contains biometric information in either a non-XML or an XML representation.
InputBIR	CBEFF_BIR_Type	0..1	N	Maps to specific ISO/IEC BIAS elements as required by that specification.
ReferenceBIR	CBEFF_BIR_Type	0..1	N	Maps to specific ISO/IEC BIAS elements as required by that specification.
BiometricDataList	BiometricDataListType	0..1	N	A list of biometric data elements.

3.2.5 BIASFaultCode

Type:	String
Description:	Error code referenced in a SOAP fault.

BIASFaultCode Enumeration Values

Value	Description
UNKNOWN_ERROR	The service failed for an unknown reason.
UNSUPPORTED_CAPABILITY	A requested capability is not supported by the service implementation.
INVALID_INPUT	The data in a service input parameter is invalid.
BIR_QUALITY_ERROR	Biometric sample quality is too poor for the service to succeed.
INVALID_BIR	The input BIR is empty or in an invalid or unrecognized format.
BIR_SIGNATURE_FAILURE	The service could not validate the signature, if used, on the input BIR.
BIR_DECRYPTION_FAILURE	The service could not decrypt an encrypted input BIR.
INVALID_ENCOUNTER_ID	The input encounter ID is empty or in an invalid format.
INVALID_SUBJECT_ID	The input subject ID is empty or in an invalid format.
UNKNOWN_SUBJECT	The subject referenced by the input subject ID does not exist.
UNKNOWN_GALLERY	The gallery referenced by the input gallery ID does not exist.
UNKNOWN_ENCOUNTER	The encounter referenced by the input encounter ID does not exist.
UNKNOWN_BIOGRAPHIC_FORMAT	The biographic data format is not known or not supported.
UNKNOWN_IDENTITY_CLAIM	The identity referenced by the input identity claim does not exist.
INVALID_IDENTITY_CLAIM	The identity claim requested is already in use.
NONEXISTANT_DATA	The data requested for deletion does not exist.
UNKNOWN_DOCUMENT_CATEGORY	The data requested does not exist.
INVALID_TOKEN	The data requested does not exist.
TOKEN_EXPIRED	The data requested does not exist.
DUPLICATE_ENCOUNTER	The input encounter ID for a new encounter already exists for that subject.
IDENTIFICATION_RESULT_NOT_YET_AVAILABLE	The result of an asynchronous identification process is not yet available.

3.2.6 BIASFaultDetail

Field	Type	#	?	Meaning
BIASFaultDetail			Y	Defines the error information associated with a SOAP fault.
BIASFaultType	BIASFaultCode	1	Y	References an error code.
BIASFaultMessage	string	1	Y	Provides a brief explanation of the fault.
BIASFaultDescription	string	0..1	N	Provides detailed information about a BIAS fault, such as trace details.

3.2.7 BIASIdentity

Field	Type	#	?	Meaning
BIASIdentity			Y	Defines a single element for encapsulating the data associated with an Identity. Includes the Identity’s reference identifiers, biographic data, and biometric data. The operations that use this type specify which elements are required.
SubjectID	BIASIDType	0..1	C	A system unique identifier for a subject. Required as input to many operations.
IdentityClaim	BIASIDType	0..1	N	An identifier by which a subject is known to a particular gallery or population group.
EncounterID	BIASIDType	0..1	C	The identifier of an encounter associated with the subject. Required for encounter-centric models.
EncounterList	EncounterListType	0..1	N	A list of encounters associated with a subject.
BiographicData	BiographicDataType	0..1	N	An Identity’s biographic data.
BiometricData	BIASBiometricDataType	0..1	N	An Identity’s biometric data.

3.2.8 BIASIDType

Type:	string
Description:	A BIAS Identifier.

3.2.9 BinaryBIR

Field	Type	#	?	Meaning
BinaryBIR	BaseBIRType		Y	Defines a BIR type of Binary
Binary	base64Binary	1	Y	BIR information in base64 binary format

3.2.10 BiographicDataItemType

Field	Type	#	?	Meaning
BiographicDataItemType			Y	Defines a single biographic data element.
Name	string	1	Y	The name of the biographic data item.
Type	string	1	Y	The data type for the biographic data item.
Value	string	0..1	N	The value assigned to the biographic data item.

NOTE: This element can be used to transmit scanned identity documents or document information (e.g., passports, driver’s license, birth certificates, utility bills, etc. required to establish an identity).

3.2.11 BiographicDataItemListType

Field	Type	#	?	Meaning
BiographicDataItemListType			Y	Defines a list of biographic data elements.
BiographicDataItem	BiographicDataItemType	1..*	Y	Data structure containing information about a biographic record.

3.2.12 BiographicDataListType

Field	Type	#	?	Meaning
BiographicDataListType			Y	Defines a list of biographic data.
BiographicData	BiographicDataType	0..*	N	Data structure containing information about a biographic record.

3.2.13 BiographicDataSetType

Field	Type	#	?	Meaning
BiographicDataSetType			Y	Defines a set of biographic data that is formatted according to the specified format.
name	string	1	Y	The name of the biographic data format. Use these names for common formats: FBI-EFTS [EFTS], FBI-EBTS [EBTS-FBI], DOD-EBTS [EBTS-DOD], INT-I [INT-I], NIEM [NIEM], xNAL [xNAL], HR-XML [HR-XML].
version	string	0..1	N	The version of the biographic data format (e.g., “7.1” for FBI-EFTS or “2.0” for NIEM).
source	string	1	Y	Reference to a URI/IRI describing the biographic data format. For example: (FBI-EFTS and FBI-EBTS) www.fbibiospecs.org, (DOD-EBTS) www.biometrics.dod.mil, (INT-I) www.interpol.int, (NIEM) www.niem.gov, (xNAL) www.oasis-open.org, (HR-XML) www.hr-xml.org.
type	string	1	Y	The biographic data format type. Use these types for common formats: ASCII (e.g., for non-XML versions of FBI-EFTS, FBI-EBTS, DOD-EBTS, or INT-I), XML (e.g., for NIEM, xNAL, and HR-XML or future versions of FBI-EBTS).
unspecified	any	0..*	N	Biographic data formatted according to a specific format.

NOTE: Biographic data formats are not limited to those listed. The string value is not enumerated. If one of the common types are used, it MUST be indicated by the specified name values; however, the service provider MAY offer other formats. See ISO/IEC 30108 for further information.

3.2.14 BiographicDataType

Field	Type	#	?	Meaning
BiographicDataType			Y	Defines a set of biographic data elements, utilizing either the BiographicDataItemListType to represent a list of elements or the BiographicDataSetType to represent a complete, formatted set of biographic information. One of the following elements must be present.
LastName	string	0..1	N	The last name of a subject.
FirstName	string	0..1	N	The first name of a subject.
BiographicDataItemList	BiographicDataItemListType	0..1	N	A list of biographic data elements.
BiographicDataItem	BiographicDataItemType	1..*	Y	A single biographic data element.
BiographicDataSet	BiographicDataSetType	0..1	N	A set of biographic data information.

NOTE: The implementer is given three choices for encoding biographic data:

· Encode only first and last name using the defined fields within BiographicDataType

· Define a list of biographic data elements using the BiographicDataItemListType

· Use a pre-defined set of biographic data (e.g., as specified in another standard) using the BiographicDataSetType.

See also ISO/IEC 30108-1, section 8.1 for further information.

3.2.15 BiometricDataType

Field	Type	#	?	Meaning
BiometricDataType			Y	Provides descriptive information about biometric data, such as the biometric type, subtype, and format, contained in the BDB of the CBEFF-BIR.
BiometricType	oasis_cbeff:MultipleTypesType	1	Y	The type of biological or behavioral data stored in the biometric record, as defined by CBEFF.
BiometricTypeCount	positiveInteger	0..1	N	The number of biometric records having the biometric type recorded in the biometric type field.
BiometricSubType	oasis_cbeff:SubtypeType	0..1	N	More specifically defines the type of biometric data stored in the biometric record, as defined by CBEFF.
BDBFormatOwner	positiveInteger	1	Y	Identifies the standards body, working group, industry consortium, or other CBEFF biometric organization that has defined the format for the biometric data.
BDBFormatType	positiveInteger	1	Y	Identifies the specific biometric data format specified by the CBEFF biometric organization recorded in the BDB Format Owner field.

3.2.16 BiometricDataListType

Field	Type	#	?	Meaning
BiometricDataListType			Y	A list of biometric data elements.
BiometricDataRecord	BiometricDataType	0..*	N	Data structure containing information about a biometric record.

3.2.17 CandidateListResultType

Field	Type	#	?	Meaning
CandidateListResultType			Y	Defines a set of candidates, utilizing the CandidateType to represent each element in the set.
CandidateList	CandidateListType	1	Y	The candidate list.

3.2.18 CandidateListType

Field	Type	#	?	Meaning
CandidateListType			Y	Defines a set of candidates, utilizing the CandidateType to represent each element in the set.
Candidate	CandidateType	0..*	N	A single candidate.

3.2.19 CandidateType

Field	Type	#	?	Meaning
CandidateType			Y	Defines a single candidate as a possible match in response to a biometric identification request.
ScoreList		0..1	N	A list of comparison(s) scores and optionally the type and subtype of the relating biometric
Score	ScoreType	1	Y	The match score.
Rank	integer	1	Y	The rank of the candidate in relation to other candidates for the same biometric identification operation.
Identity
SubjectID	BIASIDType	0..1	Y	The identifier of the subject.
BiographicData	BiographicDataType	0..1	N	Biographic data associated with the candidate match.
BIRList	CBEFF_BIR_ListType	1	Y	Biometric data associated with the candidate match.

3.2.20 CapabilityListType

Field	Type	#	?	Meaning
CapabilityListType			Y	Defines a set of capabilities.
Capability	CapabilityType	0..*	N	A single capability.

3.2.21 CapabilityName

Type:	string
Description:	A list of capability items.

CapabilityName Enumeration Values

Value		Description
AggregateInputDataOptional		A data element accepted as optional input by the implementing system for the aggregate services. The Capability Value should be set to the name of the data element that will be accepted by the aggregate services. The Capability Supporting Value that indicates the which services support the data element, using one or more of the following values, each separated by a comma: “Delete” “Enroll” “Identify” “Verify” “All”
AggregateInputDataRequired		A data element required as input by the implementing system for the aggregate services. The Capability Value should be set to the name of the data element that will be accepted by the aggregate services. The Capability Supporting Value that indicates the which services support the data element, using one or more of the following values, each separated by a comma: “Delete” “Enroll” “Identify” “Verify” “All”
AggregateProcessingOption		A processing option supported by the implementing system for the aggregate services. The Capability Value should be set to the option identifier, or “key” field, for the Processing Option parameter in the aggregate services. The Capability Supporting Value that indicates the option value, or “value” field, for the Processing Option parameter in the aggregate services, if applicable. The Capability Additional Info should indicate which aggreagate services support the processing option, using one or more of the following values, each separated by a comma: “Delete” “Enroll” “Identify” “Verify” “Retrieve” “All”
AggregateReturnData		A data element returned by the implementing system for the aggregate services. The Capability Value should be set to the name of the data element that will be returned by the aggregate services. The Capability Supporting Value that indicates which services support the data element, using one or more of the following values, each separated by a comma: “Delete” “Enroll” “Identify” “Verify” “Retrieve” “All”
AggregateServiceDescription		Describes the processing logic of an aggregate service supported by the implementing system. The Capability Value should be set to the name of the data element that describes the aggregate services. The Capability Supporting Value that indicates the which services support the data element, using one or more of the following values, each separated by a comma: “Delete” “Enroll” “Identify” “Verify” “Retrieve”
BiographicDataSet		Identifies a biographic data set supported by the implementing system. The Capability Value should contain the name of the biographic data format supported by the implementing system (e.g. “EBTS” or “NIEM”). The Capability Supporting Value should contain the version of the biographic data format supported by the implementing system. The Capability Additional Info should contain the biographic data format type supported by the implementing system (e.g. ASCII or XML).
CBEFFPatronFormat		A patron format supported by the implementing system. The Capability Value should contain the format owner. The Capability Supporting Value should contain the format type.
ClassificationAlgorithmType		A classification algorithm type supported by the implementing system. The Capability Value should contain the name of classification alogorithm type supported by the implementing system.
ConformanceClass	Identifies the conformance class of the BIAS implementation. The Capability Value should be set to one of the following: 1 – (Class 1 conformance) 2 – (Class 2 conformance) 3 – (Class 3 conformance) 4 – (Class 4 conformance) 5 – (Class 5 conformance) 6 – (Class 6 conformance) 7 – (Class 7 conformance)
Gallery	A gallery or population group supported by the implementing system. The Capability Value should be the same as the value used for the Gallery ID parameter in the Add Subject to Gallery, Delete Biographic Data, Delete Biometric Data, Delete Subject From Gallery, Identify Subject, Retrieve Biographic Data Retrieve Biometric Data, Retrieve Document Data, Set Biographic Data, Set Biometric Data, Set Document Data, and Verify Subject Services.
IdentityModel	Identifies whether the implementing system is person-centric or encounter-centric based. The Capability Value shall be set to one of the following: “person” “encounter”
MatchAlgorithm	A match algorithm vendor and algorithm vendor product ID supported by the implementing system. The Capability Value shall contain the algorighm vendor. The Capability Supporting Value shall contain the algorithm vendor product ID. The Capability Additional Info shall be set to the biometric type (defined by the XML Patron Format in ISO/IEC 19785-3) that corresponds to the match algorithm. The Capability Description shall contain the software version of the match algorithm.
MatchScore	Identifies the use of match scores returned by the implementing system. The Capability Value shall be set to the end-of-score-range that signifies a match. The Capability Supporting Value shall be set to the end-of-score-range that signifies a no-match. The Capability Additional Info shall be set to the biometric type (defined by the XML Patron Format in ISO/IEC 19785-3) that corresponds to the match score range.
QualityAlgorithm	A quality algorithm vendor and algorithm vendor product ID supported by the implementing system. The Capability Value shall contain the algorighm vendor. The Capability Supporting Value shall contain the algorithm vendor product ID. The Capability Additional Info shall be set to the biometric type (defined by the XML Patron Format in ISO/IEC 19785-3) that corresponds to the quality algorithm. The Capability Description shall contain the software version of the quality algorithm.
SupportedBiometric	A biometric type supported by the implementing system. The Capability Value shall be set to the biometric type, as defined by the ZML Patron Format in ISO/IEC 19785-3 (for example, the biometric type for face is represented a “face”). The Capability Supporting Value shall indicate if the implementing system supports matching for the biometric type, using one of he following values: “1” (identification) “2” (verification) “3” (identification and verification) “4” (no comparison supported)
TransformOperation	A transform operation type supported by the implementing system. The Capability Value shall be equal to the value for the Transform Operation parameter in the Transform Biometric Data service. The Capability Supporting Value shall specify the value of the Transform Control parameter in the Transform Biometric Data service. The value returned may be either a single value or a range of values. If a range of values is returned, the Capability Description shall specify additional information for the value of the Transform Control parameter. If the Transform Operation does not support a Transform Control, the Capability Supporting value shall be set to “NotApplicable”.

3.2.22 CapabilityType

Field	Type	#	?	Meaning
CapabilityType			Y	Defines a single capability supported by an implementing system.
CapabilityName	CapabilityName	1	Y	The name of the capability.
CapabilityID	string	0..1	N	An identifier assigned to the capability by the implementing system.
CapabilityDescription	string	0..1	N	A description of the capability.
CapabilityValue	string	0..1	N	A value assigned to the capability.
CapabilitySupportingValue	string	0..1	N	A secondary value supporting the capability.
CapabilityAdditionalInfo	string	0..1	N	Contains additional information for the supported capability.

3.2.23 CBEFF_BIR_ListType

Field	Type	#	?	Meaning
CBEFF_BIR_ListType			Y	A list of CBEFF-BIR elements.
BIR	CBEFF_BIR_Type	0..*	N	CBEFF structure containing information about a biometric sample.

3.2.24 CBEFF_BIR_Type

Field	Type	#	?	Meaning
CBEFF_BIR_Type			Y	Represents biometric information, with either a non-XML or XML representation.
FormatOwner	positiveInteger	1	Y	Identifies the Patron format owner.
FormatType	positiveInteger	1	Y	Identifies the Patron format type.
BIR_Information		0..1	N	Describes what is contained in a BIR.
BIR_Info	oasis_cbeff:BIRInfoType	0..1	N	Contains information about the CBEFF-BIR.
BDB_Info	oasis_cbeff:BDBInfoType	0..1	N	Contains information about the BDB in a simple CBEFF-BIR.
SB_Info	oasis_cbeff:SBInfoType	0..1	N	Contains information about the security block, if used, in a simple CBEFF-BIR.
BIR	BaseBIRType	1	Y	One of the following sub-elements must be present: BinaryBIR, URI_BIR, or XML_BIR.

NOTE: The implementer is given three choices for encoding a BIR:

As an XML BIR (following the XML Patron format as specified in Annex B)
As a reference to a URI (from which the receiver would retrieve the actual BIR)
As a complete Base64 encoded binary (non-XML) BIR.

The latter two alternatives can use any CBEFF Patron Format. The optional BIR_Information provides a mechanism for exposing metadata associated with a BIR format that is not easily decoded (i.e., a non-XML BIR). See section 5.3 for more information on handling of binary data within BIAS and ISO/IEC 30108, Clause 8.2, for more information on representing biometric data.

NOTE:

(1) XML BIRs MUST conform to the XML patron format in Annex B; however, non-XML (binary) and URI BIRs MAY implement any CBEFF patron format.

(2) It is RECOMMENDED that only registered CBEFF patron formats be used; however, in closed systems, this may not be required.

3.2.25 Classification

Type:	string
Description:	The result of a classification.

3.2.26 ClassificationAlgorithmType

Type:	string
Description:	Type of classification algorithm that was used to perform the classification.

3.2.27 ClassificationData

Field	Type	#	?	Meaning
ClassificationData			Y	Contains information on classification results and the algorithm used to determine the classification.
Classification	Classification	1	Y	The result of the classification.
ClassificationAlgorithmType	ClassificationAlgorithmType	1	Y	Identifies the type of classification algorithm that was used to perform the classification.

3.2.28 DocumentDataType

Field	Type	#	?	Meaning
DocumentDataType			Y	Defines a set of document data elements providing information about the presented identity document.
DocumentCategory	string	1	Y	The type of identity document presented (e.g. passport).
DocumentIDNumber	string	0..1	N	The number associated with the identity document (e.g. passport number)
DocumentIssuanceCountryCode	iso_3166_1:CountryAlpha2CodeType	0..1	N	The ISO 2-character code for the country which issued the document or from within which it was issued.
DocumentIssuingOrganization	string	0..1	N	The entity which issued the identity document.
DocumentIssuanceDate	datetime	0..1	N	The date upon which the identity document was issued.
DocumentExpirationDate	datetime	0..1	N	The date upon which the identity document is no longer valid (expires).
DocumentLastName	string	0..1	N	The family name of the person to whom the identity document was issued, as contained within the document itself.
DocumentFirstName	string	0..1	N	The first given name of the person to whom the identity document was issued, as contained within the document itself.
DocumentMiddleName	string	0..1	N	The second given name of the person to whom the identity document was issued, as contained within the document itself.
DocumentValidity	boolean	0..1	N	The assessed validity of the identity document (e.g. as the result of local or online validity checks).
DocumentValidityText	string	0..1	N	Details or remarks associated with the assessed validity (e.g. description of validity issue).
DocumentImage	xsd:base64binary	0..1	N	A scanned image of the subject document (e.g. passport picture page).

3.2.29 DocumentDataListType

Field	Type	#	?	Meaning
DocumentDataListType			Y	Provides a list of documents.
DocumentData	DocumentDataType	0..*	Y	Data structure containing information about a document and optionally an image of that document.

3.2.30 EncounterCategoryType

Type:	String
Description:	Identifies the type of encounter (interaction) during which the identity (biographic, biometric, and/or document) data was collected from the subject as determined by the requester.

EncounterCategoryType Enumeration Values

Value	Description
Enrollment	The encounter is created during an enrolment interaction.
Recognition	The encounter is created during a recognition interaction.
Unspecified	The type of encounter is unknown.

3.2.31 EncounterListType

Field	Type	#	?	Meaning
EncounterListType			Y	Defines a set of encounters.
EncounterID	BIASIDType	0..*	N	The identifier of an encounter.

3.2.32 FusionDecision

Type:	string
Description:	The match decision assigned by the matching algorithm

3.2.33 FusionIdentityListType

Field	Type	#	?	Meaning
FusionIdentityListType			Y	Contains fusion input elements for one or more identities, utilizing the FusionInformationListType to represent a single set of fusion information for each identity.
FusionIdentity	FusionInformationListType	0..*	Y	A set of fusion information for a single identity.

3.2.34 FusionInformationListType

Field	Type	#	?	Meaning
FusionInformationListType			Y	Contains at a minimum two sets of fusion input elements, as input to the PerformFusion operation.
FusionElement	FusionInformationType	2..*	Y	A set of fusion information.

3.2.35 FusionInformationType

Field	Type	#	?	Meaning
FusionInformationType			Y	Represents the information necessary to perform a fusion operation.
BiometricType	oasis_cbeff:MultipleTypesType	1	Y	The type of biological or behavioral data stored in the biometric record, as defined by CBEFF.
BiometricSubType	oasis_cbeff: SubtypeType	0..1	N	More specifically defines the type of biometric data stored in the biometric record.
AlgorithmOwner	string	1	Y	The owner or vendor of the algorithm used to determine the score or decision.
AlgorithmType	string	1	Y	The Algorithm Owner’s identifier for the specific algorithm product and version used to determine the score or decision.
FusionResult	FusionResult	0..1	C	Either FusionScore or a FusionDecision element MUST be used.

3.2.36 FusionResult

Type:	complexType
Description:	The base type for any resulting types which indicate the status of a Fusion operation

3.2.37 FusionScore

Type:	ScoreType
Description:	The similarity score assigned by the matching algorithm.

3.2.38 GenericRequestParameters

Field	Type	#	?	Meaning
GenericRequestParameters			Y	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested.

NOTE: See section 5.4 for alternatives for identifying the requested BIAS operation in a BIAS SOAP message.

3.2.39 IdentifySubjectResultType

Description:

A base type for all types that could be returned from the IdentifySubject operation

3.2.40 InformationType

Field	Type	#	?	Meaning
InformationType			Y	Allows for an unlimited number of data element types, and it does not specify nor require any particular data element.
unspecified	any	0..*	N

3.2.41 ListFilterType

Field	Type	#	?	Meaning
ListFilterType			Y	Provides a method to filter the amount of information returned in a search of biometric data.
BiometricTypeFilters		1	Y
BiometricTypeFilter	oasis_cbeff:MultipleTypesType	1..*	Y	Limits the returned information to a specific type of biometric, as defined by CBEFF.
IncludeBiometricSubType	boolean	1	Y	A Boolean flag indicating if biometric subtype information should be returned.

3.2.42 MatchType

Type:	boolean
Description:	The result of a fusion method.

3.2.43 OptionType

Field	Type	#	?	Meaning
OptionType			Y	BIAS aggregate operations support the ability to include various processing options which direct and possibly control the business logic for that operation. Together with the ProcessingOptionsType, The OptionType provides a method to represent those options. Processing options SHOULD be defined by the implementing system.
Key	string	1	Y	The identifier of an option supported by the implementing system.
Value	string	0..1	N	The value for an option supported by the implementing system.

3.2.44 ProcessingOptionsType

Field	Type	#	?	Meaning
ProcessingOptionsType			Y	BIAS aggregate operations support the ability to include various processing options which direct and possibly control the business logic for that operation. The ProcessingOptionsType provides a method to represent those options. Processing options SHOULD be defined by the implementing system.
Option	OptionType	0..*	N	An option supported by the implementing system.

3.2.45 ProductID

Type:	string
Description:	The vendor’s ID for a particular product.

3.2.46 QualityData

Field	Type	#	?	Meaning
QualityData			Y	Contains information about a biometric sample’s quality and the algorithm used to compute the quality.
QualityScore	oasis_cbeff:QualityType	0..1	N	The quality of a biometric sample.
AlgorithmVendor	VendorIdentifier	1	Y	The vendor of the quality algorithm used to determine the quality score.
AlgorithmVendorProductID	ProductID	1	Y	The vendor’s ID for the algorithm used to determine the quality.
AlgorithmVersion	VersionType	0..1	N	The version of the algorithm used to determine the quality.

3.2.47 ResponseStatus

Field	Type	#	?	Meaning
ResponseStatus			Y
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.

3.2.48 ReturnCode

Type:	unsignedLong
Description:	Return value specifying success or other condition.

ReturnCode Enumeration Values

Value	Description
0	Success

3.2.49 ScoreType

Field	Type	#	?	Meaning
ScoreType			Y
Value	float	1	Y	Defines a match result or quality score.
BiometricType	oasis_cbeff:MultipleTypesType	0..1	N	The type of biological or behavioral data stored in the biometric record, as defined by CBEFF.
BiometricSubType	oasis_cbeff:SubTypesType	0..1	N	More specifically defines the type of biometric data stored in the biometric record.

NOTE: Matching scores MAY be in a standardized or proprietary form in terms of value range and interpretation. Quality scores, however, follow the definition found in Annex

3.2.50 TokenResultType

Field	Type	#	?	Meaning
TokenResultType			Y	Defines a token that is returned for asynchronous processing.
TokenType	TokenType	1	Y	Defines a token that is returned for asynchronous processing.

3.2.51 TokenType

Field	Type	#	?	Meaning
TokenType			Y	Defines a token that is returned for asynchronous processing.
TokenValue	string	1	Y	A value returned by the implementing system that is used to retrieve the results to an operation at a later time.
Expiration	date	1	Y	A date and time at which point the token expires and the operation results are no longer guaranteed to be available.

NOTE: Date/time format is defined in ISO/IEC 30108 and is consistent with the date format specified in Annex B and ISO 8601[DATE-TIME].See also Annex A for schema definition.

3.2.52 URI_BIR

Field	Type	#	?	Meaning
URI_BIR	BaseBIRType		Y	Defines a BIR type of Binary
URI	anyURI	1	Y	The URI of the BIR

3.2.53 VendorIdentifier

Type:	string
Description:	Identifies a vendor.

NOTE: Vendor identifiers are registered with IBIA as the CBEFF registration authority (see ISO/IEC 19785-2). Registered biometric organizations are listed at: http://www.ibia.org/cbeff/_biometric_org.php.

3.2.54 Version

Field	Type	#	?	Meaning
Version			Y	For a description or definition of each data element, see the referenced CBEFF standards in the CBEFF_BIR_TYPE schema.
major	nonNegativeInteger	1	Y
minor	nonNegativeInteger	1	Y

3.2.55 VersionType

Type:	string
Description:	The version of a component.

3.2.56 XML_BIR

Field	Type	#	?	Meaning
XML_BIR	BaseBIRType		Y	Defines a BIR type of Binary
XML	Oasis_cbeff:BIRType	1	Y	BIR information in XML format

4 BIAS Messages

This section describes the BIAS messages implementing BIAS operations as defined in ISO/IEC 30108-1:2015. The operations are listed alphabetically, with each operation containing a request and a response message. The tables follow the conventions described in section 3.1.

4.1 Primitive Operations

4.1.1 AddSubjectToGallery

AddSubjectToGalleryRequest

AddSubjectToGalleryResponse

The AddSubjectToGallery operation registers a subject to a given gallery or population group. As an OPTIONAL parameter, the value of the claim to identity by which the subject is known to the gallery MAY be specified. This claim to identity MUST be unique across the gallery. If no claim to identity is specified, the subject ID (assigned with the CreateSubject operation) will be used as the claim to identity. In the encounter-centric model, the encounter ID associated with the subject’s biometrics that will be added to the gallery MUST be specified. Additionally, the service provider implementation is responsible for the creation and management of galleries. For this purpose, services are not exposed to the requester.

Request Message

Field	Type	#	?	Meaning
AddSubjectToGallery			Y	Register a subject to a given gallery or population group.
AddSubjectToGalleryRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “AddSubjectToGallery”.
GalleryID	BIASIDType	1	Y	The identifier of the gallery or population group to which the subject will be added.
Identity	BIASIdentity	1	Y	The identity to add to the gallery.
SubjectID	BIASIDType	1	Y	A system unique identifier for a subject.
IdentityClaim	BIASIDType	0..1	N	An identifier by which a subject is known to a particular gallery or population group. (This could be a username or account number, for example.)
EncounterID	BIASIDType	0..1	C	The identifier of an encounter associated with the subject. Required for encounter-centric models.

Response Message

Field	Type	#	?	Meaning
AddSubjectToGalleryResponse			Y	The response to an AddSubjectToGallery operation.
AddSubjectToGalleryResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.

4.1.2 CheckQuality

CheckQualityRequest

CheckQualityResponse

The CheckQuality operation returns a quality score for a given biometric or a specified subject. Either a biometric sample or a subject ID MUST be provided. The biometric input is provided in a CBEFF basic structure or CBEFF record, which in this specification is called a CBEFF-BIR. The algorithm vendor and algorithm vendor product ID MAY be optionally provided in order to request a particular algorithm’s use in calculating the biometric quality. If an algorithm vendor is provided, then the algorithm vendor product ID is REQUIRED. If no algorithm vendor is provided, the implementing system will provide the algorithm vendor and algorithm vendor product ID that were used to calculate the biometric quality as output parameters.

Algorithm Vendors are registered with the ISO Biometric Registration Authority. They are assigned unique identifiers as outlined in ISO/IEC 19785-2. Algorithm Product IDs are assigned by the registered algorithm vendor.

Request Message

Field	Type	#	?	Meaning
CheckQuality			Y	Calculate a quality score for a given biometric.
CheckQualityRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “CheckQuality”.
BiometricData	BIASBiometricDataType	0..1	C	Data structure containing a single biometric sample for which a quality score is to be determined; required if no Subject ID is provided.
BIR	CBEFF_BIR_Type	1	Y	The biometric sample.
Identity	BIASIdentity	0..1	C	Required if no BIR is provided.
SubjectID	BIASIDType	1	Y	Identifies the subject; required if no BIR is provided.
Qualityinfo	QualityData	0..1	N	Specifies a particular algorithm vendor and vender product ID.
AlgorithmVendor	VendorIdentifier	1	Y	The vendor of the quality algorithm used to determine the quality score.
AlgorithmVendorProductID	ProductID	1	C	The vendor assigned ID for the algorithm used to determine the quality; required as input if algorithm vendor is provided

Response Message

Field	Type	#	?	Meaning
CheckQualityResponse			Y	The response to a CheckQuality operation.
CheckQualityResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
QualityInfo	QualityData	1	Y	Contains the quality information for the submitted biometric sample.
QualityScore	oasis_cbeff:QualityType	0..1	N	The quality of a biometric sample.
AlgorithmVendor	VendorIdentifier	1	Y	The vendor of the quality algorithm used to determine the quality score.
AlgorithmVendorProductID	ProductID	1	Y	The vendor’s ID for the algorithm used to determine the quality.
AlgorithmVersion	VersionType	1	Y	The version of the algorithm used to determine the quality.

4.1.3 ClassifyBiometricData

ClassifyBiometricDataRequest

ClassifyBiometricDataResponse

The ClassifyBiometricData operation attempts to classify a biometric sample. For example, a fingerprint biometric sample may be classified as a whorl, loop, or arch (or other classification classes and sub-classes). If no classification algorithm is input, then the BIAS service provider will make the selection.

To obtain the types of classification algorithms and classes, see the QueryCapabilities operation.

Request Message

Field	Type	#	?	Meaning
ClassifyBiometricData			Y	Classifies a biometric sample.
ClassifyBiometricDataRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “ClassifyBiometricData”.
BiometricData	BIASBiometricDataType	1	Y	Data structure containing a single biometric sample for which the classification is to be determined.
BIR	CBEFF_BIR_Type	1	Y	The biometric sample.
ClassificationData		0..1	N	Contains the algorithm to be used to determine the classification.
ClassificationAlgorithmType	ClassificationAlgorithmType	1	Y	Identifies the type of classification algorithm to be used to perform the classification.

Response Message

Field	Type	#	?	Meaning
ClassifyBiometricDataResponse			Y	The response to a ClassifyBiometricData operation, containing the classification of a biometric sample.
ClassifyBiometricDataResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
ClassificationData	ClassificationData	1	Y	Information on the results and type of classification performed.
Classification	Classification	1	Y	The result of the classification.
ClassificationAlgorithmType	ClassificationAlgorithmType	1	Y	Identifies the type of classification algorithm that was used to perform the classification.

4.1.4 CreateEncounter

CreateEncounterRequest

CreateEncounterResponse

The CreateEncounter operation creates a new encounter record for a subject and associates an encounter ID to that record. If an encounter ID is not supplied by the requester, the service generates an encounter ID that uniquely identifies the encounter within the subject record. The CreateEncounter operation is performed prior to a SetBiographicData, SetBiometricData, or SetDocumentData operation.

In encounter mode, for match operations, the BIAS service provider will create the encounter and will set the encounter type to “recognition”. Normally the BIAS implementation will assign the encounter ID. However, if a requester assigns the encounter ID, it should be used unless it duplicates an existing encounter ID. If that happens an error should be returned.

Request Message

Field	Type	#	?	Meaning
CreateEncounter			Y	Create a new encounter record for the specified subject and associate an encounter ID to that record.
CreateEncounterRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “CreateEncounter”.
Identity	BIASIdentity	1	Y
SubjectID	BIASIDType	1	Y	A system unique identifier for a subject
EncounterID	BIASIDType	0..1	N	The identifier of an encounter associated with the subject. Required for encounter-centric models.
EncounterType	EncounterCategoryType	1	Y	Identifies the type of encounter during which data was collected from the subject, as determined by the requester.

Response Message

Field	Type	#	?	Meaning
CreateEncounterResponse			Y	The response to a CreateEncounter operation, containing the new encounterID associated with the specified subject.
CreateEncounterResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
Identity	BIASIdentity	1	Y
EncounterID	BIASIDType	1	Y	The identifier of an encounter associated with the subject. Required for encounter-centric models.

4.1.5 CreateSubject

CreateSubjectRequest

CreateSubjectResponse

The CreateSubject operation creates a new subject record and associates a subject ID to that record. As an optional parameter, the subject ID MAY be specified by the caller. If no subject ID is specified, the CreateSubject operation will generate one. UUIDs should be used for Subject IDs when universal uniqueness is required.

Request Message

Field	Type	#	?	Meaning
CreateSubject			Y
CreateSubjectRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “CreateSubject”.

Response Message

Field	Type	#	?	Meaning
CreateSubjectResponse			Y	The response to a CreateSubject operation, containing the subject ID of the new subject record.
CreateSubjectResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
Identity	BIASIdentity	1	Y
SubjectID	BIASIDType	1	Y	A system unique identifier for a subject.

4.1.6 DeleteBiographicData

DeleteBiographicDataRequest

DeleteBiographicDataResponse

The DeleteBiographicData operation erases all of the biographic data associated with a given subject record. In the encounter-centric model the operation erases all of the biographic data associated with a given encounter, and therefore the encounter ID MUST be specified. If no encounter ID is specified, or it is null, biographic data will be removed from all encounters. If a gallery is specified, biographic data will be deleted from that gallery only.

When deleting data, BIAS implementations MAY completely erase the information in order to prevent the ability to reconstruct a record in whole or in part, or they MAY track and record the deleted information for auditing and/or quality control purposes.

Request Message

Field	Type	#	?	Meaning
DeleteBiographicData			Y	Erase all of the biographic data associated with a given subject record or, in the encounter-centric model, with a given encounter.
DeleteBiographicDataRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “DeleteBiographicData”.
Identity	BIASIdentity	1	Y
SubjectID	BIASIDType	1	Y	A system unique identifier for a subject.
EncounterID	BIASIDType	0..1	C	The identifier of an encounter associated with the subject. Required for encounter-centric models.
GalleryID	BIASIDType	0..1	N	The identifier of the gallery or population group from which the biographic information will be deleted.

Response Message

Field	Type	#	?	Meaning
DeleteBiographicDataResponse			Y	The response to a DeleteBiographicData operation.
DeleteBiographicDataResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.

4.1.7 DeleteBiometricData

DeleteBiometricDataRequest

DeleteBiometricDataResponse

The DeleteBiometricData operation erases all of the biometric data associated with a given subject record. In the encounter-centric model the operation erases all of the biometric data associated with a given encounter, and therefore the encounter ID MUST be specified. If no encounter ID is specified, or it is null, biometric data will be removed from all encounters. If a gallery is specified, biometric data will be deleted from that gallery only. If a biometric type(s) is specified, then only biometric data of that type will be deleted.

Request Message

Field	Type	#	?	Meaning
DeleteBiometricData			Y	Erase all of the biometric data associated with a given subject record or, in the encounter-centric model, with a given encounter.
DeleteBiometricDataRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “DeleteBiometricData”.
Identity	BIASIdentity	1	Y
SubjectID	BIASIDType	1	Y	A system unique identifier for a subject.
EncounterID	BIASIDType	0..1	C	The identifier of an encounter associated with the subject. Required for encounter-centric models.
BiometricType	oasis_cbeff:MultipleTypesType	0..1	N	The type of biological or behavioral data to delete, as defined by CBEFF.
GalleryID	BIASIDType	0..1	N	The identifier of the gallery or population group from which the biometric information will be deleted.

Response Message

Field	Type	#	?	Meaning
DeleteBiometricDataResponse			Y	The response to a DeleteBiometricData operation.
DeleteBiometricDataResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.

4.1.8 DeleteDocumentData

DeleteDocumentDataRequest

DeleteDocumentDataResponse

The DeleteDocumentData operation erases all of the document data of the specified category(ies) associated with a given subject record. In the encounter-centric model the service erases all of the document data associated with a given encounter, and therefore the encounter ID MUST be specified. If no encounter ID is specified, or it is null, document data will be removed from all encounters. If no categories are specified, then all categories (for the specified encounters) will be deleted.

When deleting data, BIAS implementations MAY completely erase the information in order to prevent the ability to reconstruct a record in whole or in part, or they may track and record the deleted information for auditing and/or quality control purposes.

Request Message

Field	Type	#	?	Meaning
DeleteDocumentData			Y	Erase all of the document data associated with a given subject record or, in the encounter-centric model, with a given encounter.
DeleteDocumentDataRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “DeleteDocumentData”.
Identity	BIASIdentity	1	Y
SubjectID	BIASIDType	1	Y	A system unique identifier for a subject
EncounterID	BIASIDType	0..1	C	The identifier of an encounter associated with the subject. Required for encounter-centric models.
DocumentData	DocumentDataType	0..1	N	Defines a set of document data elements providing information about the presented identity document.
DocumentCategory	string	1	Y	The category(ies) of the identity documents to be deleted.

Response Message

Field	Type	#	?	Meaning
DeleteDocumentDataResponse			Y	The response to a DeleteDocumentData operation.
DeleteDocumentDataResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.

4.1.9 DeleteEncounter

DeleteEncounterRequest

DeleteEncounterResponse

The DeleteEncounter operation deletes an existing encounter record from the system. When deleting an encounter, BIAS implementations MAY completely erase the information in order to prevent the ability to reconstruct a record in whole or in part, or they MAY track and record the deleted information for auditing and/or quality control purposes.

Request Message

Field	Type	#	?	Meaning
DeleteEncounter			Y	Delete an existing encounter record and, any associated encounter information.
DeleteEncounterRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “DeleteEncounter”.
Identity	BIASIdentity	1	Y
SubjectID	BIASIDType	1	Y	A system unique identifier for a subject
EncounterID	BIASIDType	1	Y	The identifier of an encounter associated with the subject.

Response Message

Field	Type	#	?	Meaning
DeleteEncounterResponse			Y	The response to a DeleteEncounter operation.
DeleteEncounterResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.

4.1.10 DeleteSubject

DeleteSubjectRequest

DeleteSubjectResponse

The DeleteSubject operation deletes an existing subject record and, in an encounter-centric model, any associated encounter information from the system. This operation also removes the subject from any registered galleries.

When deleting a subject, BIAS implementations MAY completely erase the subject information in order to prevent the ability to reconstruct a record or records in whole or in part, or they MAY track and record the deleted information for auditing and/or quality control purposes.

Request Message

Field	Type	#	?	Meaning
DeleteSubject			Y	Delete an existing subject record and, in an encounter-centric model, any associated encounter information.
DeleteSubjectRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “DeleteSubject”.
Identity	BIASIdentity	1	Y	The identity of the subject to delete.
SubjectID	BIASIDType	1	Y	A system unique identifier for a subject.

Response Message

Field	Type	#	?	Meaning
DeleteSubjectResponse			Y	The response to a DeleteSubject operation.
DeleteSubjectResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.

4.1.11 DeleteSubjectFromGallery

DeleteSubjectFromGalleryRequest

DeleteSubjectFromGalleryResponse

The DeleteSubjectFromGallery operation removes the registration of a subject from a gallery or population group. The subject is identified by either the subject ID or the claim to identity that was specified in the AddSubjectToGallery operation.

Request Message

Field	Type	#	?	Meaning
DeleteSubjectFromGallery			Y	Remove the registration of a subject from a gallery or population group.
DeleteSubjectFromGalleryRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “DeleteSubjectFromGallery”.
GalleryID	BIASIDType	1	Y	The identifier of the gallery or population group from which the subject will be deleted.
Identity	BIASIdentity	1	Y	The identity to remove from the gallery.
SubjectID	BIASIDType	0..1	C	A system unique identifier for a subject. Required if an Identity Claim is not provided.
IdentityClaim	BIASIDType	0..1	C	An identifier by which a subject is known to a particular gallery or population group. Required if a Subject ID is not provided.

Response Message

Field	Type	#	?	Meaning
DeleteSubjectFromGalleryResponse			Y	The response to a DeleteSubjectFromGallery operation.
DeleteSubjectFromGalleryResponsePackage
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.

4.1.12 GetIdentifySubjectResults

GetIdentifySubjectResultsRequest

GetIdentifySubjectResultsResponse

The GetIdentifySubjectResults operation retrieves the identification results for the specified token. This opereation is used in conjunction with the IdentifySubject operation. If the IdentifySubject operation is implemented as an asynchronous service, the implementing system returns a token and the GetIdentifySubjectResults operation is used to poll for the results of the original IdentifySubject request.

Request Message

Field	Type	#	?	Meaning
GetIdentifySubjectResults			Y	Retrieve the identification results for a specified token, which was returned by the IdentifySubject operation.
GetIdentifySubjectResultsRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “GetIdentifySubjectResults”.
Token	TokenType	1	Y	A value used to retrieve the results of an IdentifySubject request.
TokenValue	string	1	Y	A value returned by the implementing system that is used to retrieve the results to an operation at a later time.
Expiration	date	1	Y	A date and time at which point the token expires and the operation results are no longer guaranteed to be available.

Response Message

Field	Type	#	?	Meaning
GetIdentifySubjectResultsResponse			Y	The response to a GetIdentifySubjectResults operation, which includes a candidate list.
GetIdentifySubjectResultsResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
CandidateList	CandidateListType	1	Y	A rank-ordered list of candidates that have a likelihood of matching the input biometric sample.
Candidate	CandidateType	0..*	N	A single candidate.
Score	ScoreType	0..1	N	The match score.
BiographicData	BiographicDataType	0..1	N	Biographic data associated with the candidate match.
BIRList	CBEFF_BIR_ListType	1	Y	Biometric data associated with the candidate match.
BIR	CBEFF_BIR_Type	0..*	N	CBEFF structure containing information about a biometric sample.

4.1.13 IdentifySubject

IdentifySubjectRequest

IdentifySubjectResponse

The IdentifySubject operation performs an identification search against a given gallery for a given biometric, returning a rank-ordered candidate list of a given maximum size. Note that multiple scores/candidates is already incorporated as a score comes with a CandidateType which is a member of CandidateList.

If the IdentifySubject operation is implemented as a synchronous service, the implementing system immediately processes the request and returns the results in the candidate list. If the IdentifySubject operation is implemented as an asynchronous service, the implementing system returns a token, which is an indication that the request is being handled asynchronously. In this case, the GetIdentifySubjectResults operation is used to poll for the results of the IdentifySubject request.

Gallery ID must not be used in conjunction with Gallery parameter. Gallery must not be used in conjunction with Gallery ID parameter. However, Gallery ID or Gallery MUST be present.

Request Message

Field	Type	#	?	Meaning
IdentifySubject			Y	Perform an identification search against a given gallery for a given biometric.
IdentifySubjectRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “IdentifySubject”.
GalleryID	BIASIDType	0..1	C	The identifier of the gallery or population group which will be searched. Must not be used in conjunction with Gallery parameter.
Gallery	CandidateListType	0..1	C	A list of BIRs that must be used instead of a stored gallery. Must not be used in conjunction with GalleryID parameter.
Identity	BIASIdentity	1	Y	Contains the BIR, a data structure containing the biometric sample for the search.
BiometricData	BIASBiometricDataType	1	Y	An Identity’s biometric data.
BIR	CBEFF_BIR_Type	1	Y	Contains biometric information in either a non-XML or an XML representation.
MaxListSize	positiveInteger	1	Y	The maximum size of the candidate list that should be returned.

Response Message

Field	Type	#	?	Meaning
IdentifySubjectResponse			Y	The response to an IdentifySubject operation, returning a rank-ordered candidate list.
IdentifySubjectResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
CandidateList	CandidateListResultType (see IdentifySubjectResultType)	0..1	C	A rank-ordered list of candidates that have a likelihood of matching the input biometric sample (i.e., exceed the system threshold). Rank ordering is from highest to lowest match score. Returned with successful synchronous request processing.
Candidate	CandidateType	0..*	N	A single candidate.
Score	ScoreType	0..1	N	The match score.
BiographicData	BiographicDataType	0..1	N	Biographic data associated with the candidate match.
BIRList	CBEFF_BIR_ListType	1	Y	Biometric data associated with the candidate match.
BIR	CBEFF_BIR_Type	0..*	N	CBEFF structure containing information about a biometric sample.
Token	TokenResultType (see IdentifySubjectResultType)	0..1	C	A token used to retrieve the results of the IdentifySubject operation. Returned with asynchronous request processing.
TokenValue	string	1	Y	A value returned by the implementing system that is used to retrieve the results to an operation at a later time.
Expiration	date	1	Y	A date and time at which point the token expires and the operation results are no longer guaranteed to be available.

NOTES:

(1) In the event that the number of candidates exceeding the threshold exceeds the MaxListSize, the system will determine which candidate is included in the last position of the rank ordered candidate list (i.e., in the event of a tie).

(2) Requesters MAY NOT change the system thresholds.

4.1.14 ListBiographicData

ListBiographicDataRequest

ListBiographicDataResponse

The ListBiographicData operation lists the biographic data elements stored for a subject using the Biographic Data Elements output parameter. Note that no actual biographic data is returned by this operation (see the RetrieveBiographicData operation to obtain the biographic data). In the encounter-centric model, an encounter ID MAY be specified to indicate that only the biographic data elements stored for that encounter should be returned. If an encounter ID is not specified and encounter data exists for the subject, the operation returns the list of encounter IDs which contain biographic data using the Encounter List output parameter, and the Biographic Data Element List output parameter is empty.

Request Message

Field	Type	#	?	Meaning
ListBiographicData			Y	Lists the biographic data elements stored for a subject.
ListBiographicDataRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “ListBiographicData”.
Identity	BIASIdentity	1	Y	Identifies the subject or, in the encounter-centric model, a subject and an encounter.
SubjectID	BIASIDType	1	Y	A system unique identifier for a subject.
EncounterID	BIASIDType	0..1	N	The identifier of an encounter associated with the subject.
EncounterType	EncounterCategoryType	0..1	C	Identifies the category of encounter. If an encounter ID is not specified and encounter data exists for the subject, the operation returns the list of encounter IDs of a specific type which contain biographic data using the Encounter List output parameter, and the Biographic Data Elements output parameter is empty. Should not be used in conjunction with EncounterID.

Response Message

Field	Type	#	?	Meaning
ListBiographicDataResponse			Y	The response to a ListBiographicData request, containing a list of biographic data elements stored for a subject. In the encounter-centric model, the biographic data elements for a specific encounter are returned. If an encounter ID is not specified and encounter data exists for the subject, the list of encounter IDs which contain biographic data is returned.
ListBiographicDataResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
Identity	BIASIdentity	1	Y	Contains a list of biographic data elements associated with a subject or encounter; non-empty if the service was successful, biographic data exists, and either (a) the person-centric model is being used or (b) the encounter-centric model is being used and an encounter identifier was specified.
BiographicData	BiographicDataType	0..1	C	An Identity’s biographic data elements that are stored in the implementing system.
BiographicDataItemList	BiographicDataItemListType	0..1	N	A list of biographic data elements.
BiographicDataItem	BiographicDataItemType	1..*	Y	A single biographic data element.
Name	string	1	Y	The name of the biographic data item.
Type	string	1	Y	The data type for the biographic data item.
Value	string	0..1	N	The value assigned to the biographic data item.
EncounterList	EncounterListType	0..1	C	A list of encounter ID’s associated with a subject and which contain biographic data; non-empty if the service was successful, biographic data exists, the encounter-centric model is being used, and an encounter identifier was not specified.
EncounterID	BIASIDType	0..*	N	The identifier of an encounter.

4.1.15 ListBiometricData

ListBiometricDataRequest

ListBiometricDataResponse

The ListBiometricData operation lists the biometric data elements stored for a subject using the Biometric Data List output parameter. Note that no actual biometric data is returned by this operation (see the RetrieveBiometricData operation to obtain the biometric data). In the encounter-centric model, an encounter ID MAY be specified to indicate that only the biometric data elements stored for that encounter should be returned. If an encounter ID is not specified and encounter data exists for the subject, the operation returns the list of encounter IDs which contain biometric data using the Encounter List output parameter, and the Biometric Data List output parameter is empty.

An optional parameter MAY be used to indicate a filter on the list of returned data. Such a filter may indicate that only biometric types should be listed (e.g., face, finger, iris, etc.) or that only biometric subtypes for a particular biometric type should be listed (e.g., all fingerprints: left slap, right index, etc.). If a filter is not specified, all biometric type and biometric subtype information must both be listed (e.g., left index finger, right iris, face frontal, etc.).

Request Message

Field	Type	#	?	Meaning
ListBiometricData			Y	Lists the biometric data elements stored for a subject.
ListBiometricDataRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “ListBiometricData”.
Identity	BIASIdentity	1	Y	Identifies the subject or, in the encounter-centric model, a subject and an encounter.
SubjectID	BIASIDType	1	Y	A system unique identifier for a subject.
EncounterID	BIASIDType	0..1	N	The identifier of an encounter associated with the subject.
EncounterType	EncounterCategoryType	0..1	C	Identifies the category of encounter. If an encounter ID is not specified and encounter data exists for the subject, the operation may return the list of encounter IDs of a specific type which contain biometric data using the Encounter List output parameter, and the Biometric Data List output parameter is empty. Should not be used in conjunction with EncounterID.
ListFilterType	ListFilterType	0..1	N	Indicates what biometric information should be returned.
BiometricTypeFilter	oasis_cbeff:MultipleTypesType	1..*	Y	Limits the returned information to a specific type of biometric, as defined by CBEFF.
IncludeBiometricSubType	boolean	1	Y	A Boolean flag indicating if biometric subtype information should be returned.

Response Message

Field	Type	#	?	Meaning
ListBiometricDataResponse			Y	The response to a ListBiometricData operation, containing a list of biometric data elements stored for a subject. In the encounter-centric model, the biometric data elements for a specific encounter are returned. If an encounter ID is not specified and encounter data exists for the subject, the list of encounter IDs which contain biometric data is returned.
ListBiometricDataResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
Identity	BIASIdentity	0..1	N	Includes a list of biometric data elements associated with a subject or encounter or a list of encounter ID’s associated with a subject and which contain biometric data.
BiometricData	BIASBiometricDataType	0..1	C	An Identity’s biometric data.
BiometricDataList	BiometricDataListType	0..1	N	A list of biometric data elements.
BiometricDataRecord	BiometricDataType	1..*	Y	Data structure containing information about a biometric record.
BiometricType	oasis_cbeff:MultipleTypesType	1	Y	The type of biological or behavioral data stored in the biometric record, as defined by CBEFF.
BiometricTypeCount	positiveInteger	0..1	N	The number of biometric records having the biometric type recorded in the biometric type field.
BiometricSubType	oasis_cbeff:SubtypeType	0..1	N	More specifically defines the type of biometric data stored in the biometric record, as defined by CBEFF.
BDBFormatOwner	positiveInteger	1	Y	Identifies the standards body, working group, industry consortium, or other CBEFF biometric organization that has defined the format for the biometric data.
BDBFormatType	positiveInteger	1	Y	Identifies the specific biometric data format specified by the CBEFF biometric organization recorded in the BDB Format Owner field.
EncounterList	EncounterListType	0..1	C	A list of encounter ID’s associated with a subject and which contain biometric data; non-empty if the service was successful, biometric data exists, the encounter-centric model is being used, and an encounter identifier was not specified.
EncounterID	BIASIDType	1..*	Y	The identifier of an encounter.

4.1.16 ListDocumentData

ListDocumentDataRequest

ListDocumentDataResponse

The ListDocumentData operation lists the document categories stored for a subject using the Document Data List output parameter. Note that no other document data is returned by this operation (see the RetrieveDocumentData operation to obtain document data by category.) In the encounter-centric model, an encounter ID may be specified to indicate that only the document data elements stored for that encounter should be returned. If an encounter ID is not specified and encounter data exists for the subject, the operation mustl return the list of encounter IDs which contain document data using the Encounter List Output parameter, and the Document Data List output parameter must be empty.

Request Message

Field	Type	#	?	Meaning
ListDocumentData			Y
ListDocumentDataRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “ListDocumentData”.
Identity	BIASIdentity	1	Y	Identifies the subject or, in the encounter-centric model, a subject and an encounter.
SubjectID	BIASIDType	1	Y	A system unique identifier for a subject
EncounterID	BIASIDType	0..1	C	The identifier of an encounter associated with the subject.
EncounterType	EncounterCategoryType	0..1	C	Identifies the category of encounter. If an encounter ID is not specified and encounter data exists for the subject, the operation must return the list of encounter IDs which contain document data using the Encounter List Output parameter, and the Document Data List output parameter must be empty. Should not be used in conjunction with EncounterID.

Response Message

Field	Type	#	?	Meaning
ListDocumentDataResponse			Y	The response to a ListDocumentData operation.
ListDocumentDataResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
DocumentDataList	DocumentDataListType	0..1	C	A list of document categories associated with a subject or encounter; non-empty if the service was successful, document data exists, and either the person-centric model is being used or the encounter-centric model is being used and an encounter identifier was specified.
DocumentData	DocumentDataType	1..*	Y	Defines a set of document data elements providing information about the presented identity document
DocumentCategory	string	1	Y	The type of identity document presented (e.g. passport).
Identity	BIASIdentity	0..1	C
EncounterList	EncounterListType	1	Y	A list of encounter IDs associated with a subject and which contain document data; non-empty if the service was successful, document data exists, the encounter-centric model is being used, and an encounter identifier was not specified.
EncounterID	BIASIDType	1..*	Y	The identifier of an encounter.

4.1.17 PerformFusion

PerformFusionRequest

PerformFusionResponse

The PerformFusion operation accepts either match score or match decision information and creates a fused match result. The FusionInformationListType, through the FusionInformationType, provides specific elements for match score input and match decision input for a single identity, while the FusionIdentityListType provides the ability to submit multiple identities to the Perform Fusion operation. The fusion method and processes are left to the implementing system.

Request Message

Field	Type	#	?	Meaning
PerformFusion			Y	Accepts either match score or match decision information and creates a fused match result.
PerformFusionRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “PerformFusion”.
FusionInput	FusionIdentityListType	1	Y
FusionIdentity	FusionInformationListType	1	Y	Score or decision input information to the fusion method for each identity.
FusionElement	FusionInformationType	2..*	Y	A set of fusion information.
BiometricType	oasis_cbeff:MultipleTypesType	1	Y	The type of biological or behavioral data stored in the biometric record, as defined by CBEFF.
BiometricSubType	oasis_cbeff:SubtypeType	0..1	N	More specifically defines the type of biometric data stored in the biometric record.
AlgorithmOwner	string	1	Y	The owner or vendor of the algorithm used to determine the score or decision.
AlgorithmType	string	1	Y	The Algorithm Owner’s identifier for the specific algorithm product and version used to determine the score or decision.
FusionResult	FusionResult	0..1	C	Either FusionScore or a FusionDecision element MUST be used.

Response Message

Field	Type	#	?	Meaning
PerformFusionResponse			Y	The response to the PerformFusion operation.
PerformFusionResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
Match	MatchType	1	Y	Indicates the result of the fusion method.

4.1.18 QueryCapabilities

QueryCapabilitiesRequest

QueryCapabilitiesResponse

The QueryCapabilities operation returns a list of the capabilities, options, galleries, etc. that are supported by the BIAS implementation. Refer to Annex A in the ISO/IEC BIAS [ISO/IEC-BIAS] standard for conformance requirements regarding which capability names an implementation must use in the QueryCapabilities operation. If the implementing system does not support a capability item, the Capability Value can be set to null in the response.

Proprietary and additional information may be returned by returning capabilities that are not part of those capabilities enumerated in the Capability Name section 3.2.21. When returning capabilities not enumerated in section 3.2.21, the Capability Description should describe the capability. For each capability enumerated in section 3.2.21, the Capability Name should be set to the name in the value column.

Request Message

Field	Type	#	?	Meaning
QueryCapabilities			Y	Returns a list of the capabilities, options, galleries, etc. that are supported by the BIAS implementation.
QueryCapabilitiesRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “QueryCapabilities”.

Response Message

Field	Type	#	?	Meaning
QueryCapabilitiesResponse			Y	The response to a QueryCapabilities operation.
QueryCapabilitiesResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
CapabilityList	CapabilityListType	1	Y	A list of capabilities supported by the BIAS implementation.
Capability	CapabilityType	0..*	N	A single capability.
CapabilityName	CapabilityName	1	Y	The name of the capability.
CapabilityID	string	0..1	N	An identifier assigned to the capability by the implementing system.
CapabilityDescription	string	0..1	N	A description of the capability.
CapabilityValue	string	0..1	N	A value assigned to the capability.
CapabilitySupportingValue	string	0..1	N	A secondary value supporting the capability.
CapabilityAdditionalInfo	string	0..1	N	Contains additional information for the supported capability.

4.1.19 RetrieveBiographicData

RetrieveBiographicDataRequest

RetrieveBiographicDataResponse

The RetrieveBiographicData operation retrieves the biographic data associated with a subject ID. In the encounter-centric model, the encounter ID MAY be specified and the operation will return the set of biographic data associated with that encounter (the list contains a single set). If the encounter ID is not specified in the encounter-centric model, the operation returns the list of biographic information associated with the most recent encounter. If no gallery ID is specified, a list of biographic information from all galleries will be returned.

Request Message

Field	Type	#	?		Meaning
RetrieveBiographicData			Y		Retrieves the biographic data associated with a subject ID.
RetrieveBiographicDataRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N		Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N		Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N		Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N		Identifies the BIAS operation that is being requested: “RetrieveBiographicData”.
Identity	BIASIdentity	1		Y	Identifies the subject or, in the encounter-centric model, a subject and an encounter.
SubjectID	BIASIDType	1		Y	A system unique identifier for a subject.
EncounterID	BIASIDType	0..1		N	The identifier of an encounter associated with the subject.
EncounterType	EncounterCategoryType	0..1		N	Identifies the type of encounter during which data was collected from the subject, as determined by the requester.
GalleryID	BIASIDType	0..1		N	The identifier of the gallery or population group from which the biographic information will be retrieved.

Response Message

Field	Type	#	?	Meaning
RetrieveBiographicDataResponse			Y	The response to a RetrieveBiographicData operation.
RetrieveBiographicDataResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
Identity	BIASIdentity	1	Y	Includes the set of biographic data associated with a subject.
BiographicDataList	BiographicDataListType	1	Y	A list of biographic data associated with the subject or encounter.
BiographicData	BiographicDataType	0..*	N	An Identity’s biographic data. One of the following elements MUST be present
LastName	string	0..1	C	The last name of a subject.
FirstName	string	0..1	C	The first name of a subject.
BiographicDataItemList	BiographicDataItemListType	0..1	C	A list of biographic data elements.
BiographicDataItem	BiographicDataItemType	1..*	Y	A single biographic data elelment.
Name	string	1	Y	The name of the biographic data item.
Type	string	1	Y	The data type for the biographic data item.
Value	string	0..1	N	The value assigned to the biographic data item.
BiographicDataSet	BiographicDataSetType	0..1	C	A set of biographic data information.

4.1.20 RetrieveBiometricData

RetrieveBiometricDataRequest

RetrieveBiometricDataResponse

The RetrieveBiometricData operation retrieves the biometric data associated with a subject ID. In the encounter-centric model, the encounter ID MAY be specified and the operation will return the biometric data associated with that encounter. If the encounter ID is not specified in the encounter-centric model, the operation returns the biometric information associated with the most recent encounter.The operation provides an OPTIONAL input parameter to specify that only biometric data of a certain type should be retrieved.

Request Message

Field	Type	#	?	Meaning
RetrieveBiometricData			Y	Retrieves the biometric data associated with a subject ID.
RetrieveBiometricDataRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “RetrieveBiometricData”.
Identity	BIASIdentity	1	Y	Identifies the subject or, in the encounter-centric model, a subject and an encounter.
SubjectID	BIASIDType	1	Y	A system unique identifier for a subject.
EncounterID	BIASIDType	0..1	N	The identifier of an encounter associated with the subject.
EncounterType	EncounterCategoryType	0..1	N	Identifies the type of encounter during which data was collected from the subject, as determined by the requester.
GalleryID	BIASIDType	0..1	N	The identifier of the gallery or population group from which the biometric information will be retrieved.
BiometricType	oasis_cbeff:MultipleTypesType	0..1	N	The type of biological or behavioral data to retrieve.

Response Message

Field	Type	#	?	Meaning
RetrieveBiometricDataResponse			Y	The response to a RetrieveBiometricData operation.
RetrieveBiometricDataResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
Identity	BIASIdentity	1	Y	Includes the biometric data associated with a subject.
BiometricData	BIASBiometricDataType	1	Y	An Identity’s biometric data.
BIRList	CBEFF_BIR_ListType	1	Y	A list of CBEFF-BIR elements.
BIR	CBEFF_BIR_Type	0..*	N	CBEFF structure containing information about a biometric sample.

4.1.21 RetrieveDocumentData

RetrieveDocumentDataRequest

RetrieveDocumentDataResponse

The RetrieveDocumentData operation retrieves the list of document data associated with a subject ID for the category(ies) specified. In the encounter-centric model, the encounter ID MAY be specified and the operation returns the list of document data associated with that encounter. If the encounter ID is not specified in the encounter-centric model, the operation returns the list of document information associated with the most recent encounter for which document data exist. If no gallery ID is specified, document data from all galleries must be returned. If no document category is specified, all documents associated with the subject (and encounter ID, if present) must be returned.

Request Message

Field	Type	#	?	Meaning
RetrieveDocumentData			Y
RetrieveDocumentDataRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “RetrieveDocumentData”.
Identity	BIASIdentity	1	Y
SubjectID	BIASIDType	1	Y	A system unique identifier for a subject
EncounterID	BIASIDType	0..1	N	The identifier of an encounter associated with the subject.
EncounterType	EncounterCategoryType	0..1	C	Identifies the category of encounter.
DocumentData	DocumentDataType	0..1	N	Defines a set of document data elements providing information about the requested identity document.
DocumentCategory	string	0..1	Y	The category(ies) of the identity documents to be retrieved.
GalleryID	BIASIDType	0..1	N	The identifier of the gallery or population group from which the biographic information will be retrieved.

Response Message

Field	Type	#	?	Meaning
RetrieveDocumentDataResponse			Y	The response to a RetrieveDocumentData operation.
RetrieveDocumentDataResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
DocumentDataList	DocumentDataListType	1	Y	A list of document data associated with a subject or encounter.

4.1.22 SetBiographicData

SetBiographicDataRequest

SetBiographicDataResponse

The SetBiographicData operation associates biographic data to a given subject record. The identity model of the system determines whether the biographic information should replace any existing biographic information (person-centric model) or if a new encounter should be created and associated with the subject (encounter-centric model). For encounter-centric models, the encounter ID MAY be specified by the caller in order to link biographic with biometric and/or document information (assuming biometric and/or document information was previously associated using the SetBiometricData and/or SetDocumentData operations). If the encounter ID is omitted for the encounter-centric model, the operation returns a system-assigned encounter ID.

For encounter-based systems, the Create Encounter operation should be called prior to Set Biographic Data and/or Set Document Data. The Encounter ID assigned as a result should be used as input to this operation.

Request Message

Field	Type	#	?	Meaning
SetBiographicData			Y	Associates biographic data to a given subject record.
SetBiographicDataRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “SetBiographicData”.
Identity	BIASIdentity	1	Y	Identifies the subject or, in the encounter-centric model, a subject and an encounter, and includes the biographic data to store.
SubjectID	BIASIDType	1	Y	A system unique identifier for a subject.
EncounterID	BIASIDType	0..1	C	The identifier of an encounter associated with the subject.
BiographicData	BiographicDataType	1	Y	An Identity’s biographic data. One of the following elements MUST be present.
LastName	string	0..1	C	The last name of a subject.
FirstName	string	0..1	C	The first name of a subject.
BiographicDataItemList	BiographicDataItemListType	0..1	C	A list of biographic data elements.
BiographicDataSet	BiographicDataSetType	0..1	C	A set of biographic data information.
GalleryID	BIASIDType	0..1	N	The identifier of the gallery or population group to which the biographic will be added.

Response Message

Field	Type	#	?	Meaning
SetBiographicDataResponse			Y	The response to a SetBiographicData operation.
SetBiographicDataResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
Identity	BIASIdentity	0..1	C	In an encounter-centric model, identifies the encounter ID assigned to a new encounter.
EncounterID	BIASIDType	1	Y	The identifier of an encounter associated with the subject.

4.1.23 SetBiometricData

SetBiometricDataRequest

SetBiometricDataResponse

The SetBiometricData operation associates biometric data to a given subject record. The identity model of the system determines whether the biometric information should replace any existing biometric information (person-centric model) or if a new encounter should be created and associated with the subject (encounter-centric model). For encounter-centric models, the encounter ID MAY be specified by the caller in order to link biometric with biographic and/or document information (assuming biographic and/or document information was previously associated using the SetBiographicData and/or SetDocumentData operation). If the encounter ID is omitted for the encounter-centric model, the operation returns a system-assigned encounter ID.

For encounter-based systems, the Create Encounter operation should be called prior to Set Biometric Data. The Encounter ID assigned as a result should be used as input to this operation.

Request Message

Field	Type	#	?	Meaning
SetBiometricData			Y	Associates biometric data to a given subject record.
SetBiometricDataRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “SetBiometricData”.
Identity	BIASIdentity	1	Y	Identifies the subject or, in the encounter-centric model, a subject and an encounter, and includes the biometric data to store.
SubjectID	BIASIDType	1	Y	A system unique identifier for a subject.
EncounterID	BIASIDType	0..1	C	The identifier of an encounter associated with the subject.
BiometricData	BIASBiometricDataType	1	Y	An Identity’s biometric data.
BIRList	CBEFF_BIR_ListType	1	Y	A list of CBEFF-BIR elements.
BIR	CBEFF_BIR_Type	1..*	Y	CBEFF structure containing information about a biometric sample.
GalleryID	BIASIDType	0..1	N	The identifier of the gallery or population group to which the biometric will be added.

Response Message

Field	Type	#	?	Meaning
SetBiometricDataResponse			Y	The response to a SetBiometricData operation.
SetBiometricDataResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.

4.1.24 SetDocumentData

SetDocumentDataRequest

SetDocumentDataResponse

The SetDocumentData operation associates identity document data to a given subject record. The identity model of the system determines whether the document information should replace any existing document information for the same document category (person-centric model) or if a new encounter should be created and associated with the subject (encounter-centric model). For encounter-centric models, the encounter ID MAY be specified by the caller in order to link document with biographic and/or biometric information (assuming biographic and/or biometric information was previously associated using the SetBiographicData and/or SetBiometricData operation). If the encounter ID is omitted for the encounter-centric model, the operation returns a system-assigned encounter ID.

Request Message

Field	Type	#	?	Meaning
SetDocumentData			Y
SetDocumentDataRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “SetDocumentData”.
Identity	BIASIdentity	1	Y
SubjectID	BIASIDType	1	Y	A system unique identifier for a subject
EncounterID	BIASIDType	0..1	N	The identifier of an encounter associated with the subject.
DocumentDataList	DocumentDataListType	1	Y	A list of document data to associate with the subject or encounter.
GalleryID	BIASIDType	0..1	N	The identifier of the gallery or population group to which the document information will be added.

Response Message

Field	Type	#	?	Meaning
SetDocumentDataResponse			Y	The response to a SetDocumentData operation.
SetDocumentDataResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
Identity	BIASIdentity	1	Y
EncounterID	BIASIDType	1	Y	The identifier of an encounter associated with the subject.

4.1.25 TransformBiometricData

TransformBiometricDataRequest

TransformBiometricDataResponse

The TransformBiometricData operation transforms or processes a given biometric in one format into a new target format.

Request Message

Field	Type	#	?	Meaning
TransformBiometricData			Y	Transforms or processes a given biometric in one format into a new target format.
TransformBiometricDataRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “TransformBiometricData”.
InputBIR	CBEFF_BIR_Type	1	Y	Data structure containing the biometric information to be transformed.
TransformOperation	unsignedLong	1	Y	Value indicating the type of transformation to perform.
TransformControl	string	0..1	N	Specifies controls for the requested transform operation. Note: This could be a compression ratio, target data format, etc.

NOTE: The values for TransformOperation and TransformControl are implementation specific.

Response Message

Field	Type	#	?	Meaning
TransformBiometricDataResponse			Y	The response to a TransformBiometricData operation.
TransformBiometricDataResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
OutputBIR	CBEFF_BIR_Type	1	Y	Data structure containing the new, transformed biometric information.

4.1.26 UpdateBiographicData

UpdateBiographicDataRequest

UpdateBiographicDataResponse

The UpdateBiographicData operation updates the biographic data for an existing subject record. The operation replaces any existing biographic data with the new biographic data. In the encounter-centric model, the encounter ID MUST be specified.

Request Message

Field	Type	#	?	Meaning
UpdateBiographicData			Y	Updates the biographic data for a given subject record.
UpdateBiographicDataRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “UpdateBiographicData”.
Identity	BIASIdentity	1	Y	Identifies the subject or, in the encounter-centric model, a subject and an encounter, and includes the biographic data to update.
SubjectID	BIASIDType	1	Y	A system unique identifier for a subject.
EncounterID	BIASIDType	0..1	C	The identifier of an encounter associated with the subject. Required for encounter-centric models.
BiographicData	BiographicDataType	1	Y	An Identity’s biographic data. One of the following elements MUST be present.
LastName	string	0..1	C	The last name of a subject.
FirstName	string	0..1	C	The first name of a subject.
BiographicDataItemList	BiographicDataItemListType	0..1	C	A list of biographic data elements.
BiographicDataItem	BiographicDataItemType	1..*	Y	A single biographic data element.
Name	string	1	Y	The name of the biographic data item.
Type	string	1	Y	The data type for the biographic data item.
Value	string	0..1	N	The value assigned to the biographic data item.
BiographicDataSet	BiographicDataSetType	0..1	C	A set of biographic data information.

Response Message

Field	Type	#	?	Meaning
UpdateBiographicDataResponse			Y	The response to an UpdateBiographicData operation.
UpdateBiographicDataResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.

4.1.27 UpdateBiometricData

UpdateBiometricDataRequest

UpdateBiometricDataResponse

The UpdateBiometricData operation updates the biometric data for an existing subject record. The operation includes an OPTIONAL parameter indicating if the new biometric sample should be merged with the existing biometric sample. If this parameter is set to “False” or is not used in the request, the operation replaces the existing biometric sample with the new biometric sample. The “merge” process is determined by the implementation. It may be accomplished by adding the sample to a multi-sample record or by performing some level of biometric fusion (for example, feature or sample level fusion). In the encounter-centric model, the encounter ID MUST be specified.

Request Message

Field	Type	#	?	Meaning
UpdateBiometricData			Y	Updates a single biometric sample for a given subject record.
UpdateBiometricDataRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “UpdateBiometricData”.
Identity	BIASIdentity	1	Y	Identifies the subject or, in the encounter-centric model, a subject and an encounter, and includes the biometric data to update.
SubjectID	BIASIDType	1	Y	A system unique identifier for a subject.
EncounterID	BIASIDType	0..1	C	The identifier of an encounter associated with the subject. Required for encounter-centric models.
BiometricData	BIASBiometricDataType	1	Y	An Identity’s biometric data.
BIR	CBEFF_BIR_Type	1	Y	Contains biometric information in either a non-XML or an XML representation.
Merge	boolean	0..1	N	Value indicating if the input biometric sample should be merged with any existing biometric information.

Response Message

Field	Type	#	?	Meaning
UpdateBiometricDataResponse			Y	The response to an UpdateBiometricData operation.
UpdateBiometricDataResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.

4.1.28 UpdateDocumentData

UpdateDocumentDataRequest

UpdateDocumentDataResponse

The UpdateDocumentData operation updates the document data for an existing subject record. The operation replaces any existing document data of the same category with the new document data. In the encounter-centric model, the encounter ID MUST be specified.

Request Message

Field	Type	#	?	Meaning
UpdateDocumentData			Y	Updates the document data for a given subject record.
UpdateDocumentDataRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “UpdateDocumentData”.
Identity	BIASIdentity	1	Y	Identifies the subject or, in the encounter-centric model, a subject and an encounter, and includes the document data to update.
SubjectID	BIASIDType	1	Y	A system unique identifier for a subject.
EncounterID	BIASIDType	0..1	C	The identifier of an encounter associated with the subject. Required for encounter-centric models.
DocumentDataList	DocumentDataListType	1	Y	A list of updated document data.

Response Message

Field	Type	#	?	Meaning
UpdateDocumentDataResponse			Y	The response to an UpdateDocumentData operation.
UpdateDocumentDataResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.

4.1.29 VerifySubject

VerifySubjectRequest

VerifySubjectResponse

The VerifySubject operation performs a 1:1 verification match between a given biometric and either a claim to identity in a given gallery or another provided biometric. As such either the Identity Claim or Reference BIR input parameters are REQUIRED.

In the encounter-centric model, for match operations, it is not necessary to explicitly create an encounter. The BIAS service provider will create the encounter and will set the encounter type to “recognition”.

Request Message

Field	Type	#	?	Meaning
VerifySubject			Y	Performs a 1:1 verification match between a given biometric and either a claim to identity in a given gallery or another given biometric.
VerifySubjectRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “VerifySubject”.
GalleryID	BIASIDType	0..1	N	The identifier of the gallery or population group of which the subject must be a member. Required if an Identity Claim is provided.
Identity	BIASIdentity	1	Y	Includes the identifying information and/or input and reference biometric samples.
IdentityClaim	BIASIDType	0..1	C	A unique identifier by which a subject is known to a particular gallery or population group. (e.g. Subject ID or account number) Required if a Reference BIR is not provided.
BiometricData	BIASBiometricDataType	1	Y	An Identity’s biometric data.
InputBIR	CBEFF_BIR_Type	1	Y	Maps to specific ISO/IEC BIAS elements as required by that specification. When multiple samples are included as input (e.g. in a multimodal operation), a complex BIR is used.
ReferenceBIR	CBEFF_BIR_Type	0..1	C	Maps to specific ISO/IEC BIAS elements as required by that specification. Required if an Identity Claim is not provided.

Response Message

Field	Type	#	?	Meaning
VerifySubjectResponse			Y	The response to a VerifySubject operation.
VerifySubjectResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
Match	boolean	0..1	Y	Indicates if the Input BIR matched either the biometric information associated with the Identity Claim or the Reference BIR.
Score	ScoreType	0..1	N	The score if the biometric information matched.

4.2 Aggregate Operations

4.2.1 Delete

DeleteRequest

DeleteResponse

The Delete operation deletes an existing subject or, in an encounter-centric model, an existing encounter from the system. This may be accomplished in a number of different ways according to system requirements and/or resources. If the Delete operation is implemented as a synchronous service, the implementing system immediately processes the request and returns the results in the Return Data parameter. If the Delete operation is implemented as an asynchronous service, the implementing system returns a token in the Token parameter, which is an indication that the request is being handled asynchronously. In this case, the GetDeletionResults operation is used to poll for the results of the Delete request.

Request Message

Field	Type	#	?	Meaning
Delete			Y	Deletes a subject or, in an encounter-centric model, an existing encounter from the system.
DeleteRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “Delete”.
ProcessingOptions	ProcessingOptionsType	1	Y	Options that guide how the aggregate service request is processed.
Option	OptionType	0..*	N	An option supported by the implementing system.
InputData	InformationType	0..1	N	Contains the input data for the operation, as required by the implementing system.
Identity	BIASIdentity	0..1	N	The identifier for the subject, or in encounter-centric model the encounter to be deleted; required for encounter-centric models.
SubjectID	BIASIDType	0..1	C	The identifier assigned to the subject.
EncounterID	BIASIDType	0..1	C	The identifier for the encounter; required for encounter-centric models.

Response Message

Field	Type	#	?	Meaning
DeleteResponse			Y	The response to a Delete operation.
DeleteResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
Identity	BIASIdentity	1	Y
SubjectID	BIASIDType	0..1	C	The identifier assigned to the subject.
EncounterID	BIASIDType	0..1	C	The identifier of the encounter; required for encounter-centric models.
ReturnData	InformationType	0..1	N	Contains the output data for the response.
Token	TokenType	0..1	C	A token used to retrieve the results of the Delete request; returned with asynchronous request processing. If set to zero, operation is processed synchronously. If set to a non-zero value, operation is processed asynchronously and Get Deletion Results must be used to retrieve the results.
TokenValue	string	1	Y	A value returned by the implementing system that is used by Get Deletion Results to retrieve the results at a later time.
Expiration	date	1	Y	A date and time at which point the token expires and the operation results are no longer guaranteed to be available.

4.2.2 Enroll

EnrollRequest

EnrollResponse

The Enroll operation adds a new subject or, in an encounter-centric model, a new encounter to the system. This may be accomplished in a number of different ways according to system requirements and/or resources.If the Enroll operation is implemented as a synchronous service, the implementing system immediately processes the request and returns the results in the Return Data parameter. If the Enroll operation is implemented as an asynchronous service, the implementing system returns a non-zero token in the Token parameter, which is an indication that the request is being handled asynchronously. In this case, the GetEnrollResults operation is used to poll for the results of the Enroll request.

If the identity model is encounter-centric, the encounter ID may optionally be specified by the caller. If the encounter ID is omitted the operation returns a system-assigned encounter ID.

Request Message

Field	Type	#	?	Meaning
Enroll			Y	Adds a new subject or, in an encounter-centric model, a new encounter to the system.
EnrollRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “Enroll”.
ProcessingOptions	ProcessingOptionsType	1	Y	Options that guide how the aggregate service request is processed.
Option	OptionType	0..*	N	An option supported by the implementing system.
InputData	InformationType	1	Y	Contains the input data for the operation, as required by the implementing system.
Identity	BIASIdentity	0..1	N
EncounterID	BIASIDType	0..1	N	The identifier for the encounter; required for encounter-centric models.

Response Message

Field	Type	#	?	Meaning
EnrollResponse			Y	The response to an Enroll operation.
EnrollResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
Identity	BIASIdentity	1	Y
SubjectID	BIASIDType	0..1	C	The identifier assigned to the subject.
EncounterID	BIASIDType	0..1	C	The identifier of the encounter; required for encounter-centric models.
ReturnData	InformationType	0..1	N	Contains the output data for the response.
Token	TokenType	0..1	C	A token used to retrieve the results of the Enroll request; returned with asynchronous request processing. If set to zero, operation is processed synchronously. If set to a non-zero value, operation is processed asynchronously and Get Enroll Results must be used to retrieve the results.
TokenValue	string	1	Y	A value returned by the implementing system that is used by Get Enroll Results to retrieve the results at a later time.
Expiration	date	1	Y	A date and time at which point the token expires and the operation results are no longer guaranteed to be available.

4.2.3 GetDeletionResults

GetDeletionResultsRequest

GetDeletionResultsResponse

The GetDeletionResults operation retrieves the deletion results for the specified token. This operation is used in conjunction with the Delete operation. If the Delete operation is implemented as an asynchronous service, the implementing system returns a token and the GetDeletionResults operation is used to poll for the results of the original Delete request.

If the service provider implements an asynchronous Delete operation, then it MUST also implement the Get Deletion Results operation.

Request Message

Field	Type	#	?	Meaning
GetDeletionResults			Y	Retrieves the deletion results for the specified token.
GetDeletionResultsRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “GetDeletionResults”.
Token	TokenType	1	Y	A value used to retrieve the results of the Delete request.
TokenValue	string	1	Y	A value returned by the implementing system that is used to retrieve the results to an operation at a later time.
Expiration	date	1	Y	A date and time at which point the token expires and the operation results are no longer guaranteed to be available.

Response Message

Field	Type	#	?	Meaning
GetDeletionResultsResponse			Y	The response to a GetDeletionResults operation.
GetDeletionResultsResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
ReturnData	InformationType	0..1	N	Contains the output data for the response.

4.2.4 GetEnrollResults

GetEnrollResultsRequest

GetEnrollResultsResponse

The GetEnrollResults operation retrieves the enrollment results for the specified token. This operation is used in conjunction with the Enroll operation. If the Enroll operation is implemented as an asynchronous service, the implementing system returns a token and the GetEnrollResults operation is used to poll for the results of the original Enroll request.

If the service provider implements an asynchronous Enroll operation, then it MUST also implement the GetEnrollResults operation.

Request Message

Field	Type	#	?	Meaning
GetEnrollResults			Y	Retrieves the enrollment results for the specified token.
GetEnrollResultsRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “GetEnrollResults”.
Token	TokenType	1	Y	A value used to retrieve the results of the Enroll request.
TokenValue	string	1	Y	A value returned by the implementing system that is used to retrieve the results to an operation at a later time.
Expiration	date	1	Y	A date and time at which point the token expires and the operation results are no longer guaranteed to be available.

Response Message

Field	Type	#	?	Meaning
GetEnrollResultsResponse			Y	The response to a GetEnrollResults operation.
GetEnrollResultsResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
ReturnData	InformationType	0..1	N	Contains the output data for the response.
Identity	BIASIdentity	1	Y
SubjectID	BIASIDType	0..1	C	The identifier assigned to the subject.
EncounterID	BIASIDType	0..1	C	The identifier of the encounter; if assigned.

4.2.5 GetIdentifyResults

GetIdentifyResultsRequest

GetIdentifyResultsResponse

The GetIdentifyResults operation retrieves the identification results for the specified token. This operation is used in conjunction with the Identify operation. If the Identify operation is implemented as an asynchronous service, the implementing system returns a token and the GetIdentifyResults operation is used to poll for the results of the original Identify request.

If the service provider implements an asynchronous Identify operation, then it MUST also implement the GetIdentifyResults operation.

Request Message

Field	Type	#	?	Meaning
GetIdentifyResults			Y	Retrieves the identification results for the specified token
GetIdentifyResultsRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “GetIdentifyResults”.
Token	TokenType	1	Y	A value used to retrieve the results of the Identify request.
TokenValue	string	1	Y	A value returned by the implementing system that is used to retrieve the results to an operation at a later time.
Expiration	date	1	Y	A date and time at which point the token expires and the operation results are no longer guaranteed to be available.

Response Message

Field	Type	#	?	Meaning
GetIdentifyResultsResponse			Y	The response to a GetIdentifyResults operation.
GetIdentifyResultsResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
Identity	BIASIdentity
EncounterID	BIASIDType	0..1	C	The identifier of the encounter, if assigned.
CandidateList	CandidateListType	0..1	C	A rank-ordered list of candidates that have a likelihood of matching the input biometric sample.
ReturnData	InformationType	0..1	N	Contains the output data for the response.

4.2.6 GetUpdateResults

GetUpdateResultsRequest

GetUpdateResultsResponse

The GetUpdateResults operation retrieves the update results for the specified token. This operation is used in conjunction with the Update operation. If the Update operation is implemented as an asynchronous service, the implementing system returns a token and the GetUpdateResults operation is used to poll for the results of the original Update request.

If the service provider implements an asynchronous Update operation, then it MUST also implement the GetUpdateResults operation.

Request Message

Field	Type	#	?	Meaning
GetUpdateResults			Y	Retrieves the Update results for the specified token
GetUpdateResultsRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “GetUpdateResults”.
Token	TokenType	1	Y	A value used to retrieve the results of the Update request.
TokenValue	string	1	Y	A value returned by the implementing system that is used to retrieve the results to an operation at a later time.
Expiration	date	1	Y	A date and time at which point the token expires and the operation results are no longer guaranteed to be available.

Response Message

Field	Type	#	?	Meaning
GetUpdateResultsResponse			Y	The response to a GetUpdateResults operation.
GetUpdateResultsResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
ReturnData	InformationType	0..1	N	Contains the output data for the response.

4.2.7 GetVerifyResults

GetVerifyResultsRequest

GetVerifyResultsResponse

The GetVerifyResults operation retrieves the verification results for the specified token. This operation is used in conjunction with the Verify operation. If the Verify operation is implemented as an asynchronous service, the implementing system returns a non-zero token and the GetVerifyResults operation is used to poll for the results of the original Verify request.

If the service provider implements an asynchronous Verifyoperation, then it MUST also implement the GetVerifyResults operation.

Request Message

Field	Type	#	?	Meaning
GetVerifyResults			Y	Retrieves the verification results for the specified token
GetVerifyResultsRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “GetVerifyResults”.
Token	TokenType	1	Y	A value used to retrieve the results of the Verify request.
TokenValue	string	1	Y	A value returned by the implementing system that is used to retrieve the results to an operation at a later time.
Expiration	date	1	Y	A date and time at which point the token expires and the operation results are no longer guaranteed to be available.

Response Message

Field	Type	#	?	Meaning
GetVerifyResultsResponse			Y	The response to a GetVerifyResults operation.
GetVerifyResultsResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
ReturnData	InformationType	0..1	N	Contains the output data for the response.
Identity	BIASIdentity	0..1	C
EncounterID	BIASIDType	1	Y	The identifier of the encounter, if assigned.
Match	boolean	1	Y	Indicates if the Input BIR matched either the biometric information associated with the Identity Claim or the Reference BIR.
Score	ScoreType	0..1	N	The score if the biometric information matched.

4.2.8 Identify

IdentifyRequest

IdentifyResponse

The Identify operation performs an identification function according to system requirements and/or resources.If the Identify operation is implemented as a synchronous service, the implementing system immediately processes the request and returns the results in the Return Data parameter. If the Identify operation is implemented as an asynchronous service, the implementing system returns a non-zero token in the Token parameter, which is an indication that the request is being handled asynchronously. In this case, the GetIdentifyResults operation is used to poll for the results of the Identify request.

Request Message

Field	Type	#	?	Meaning
Identify			Y	Performs an identification function.
IdentifyRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “Identify”.
ProcessingOptions	ProcessingOptionsType	1	Y	Options that guide how the aggregate service request is processed.
Option	OptionType	0..*	N	An option supported by the implementing system.
InputData	InformationType	1	Y	Contains the input data for the aggregate services.
GalleryID	BIASIDType	0..1	N	The identifier of the gallery or population group which will be searched; this parameter may also be used to identify an external system where the identification request should be forwarded, if this capability is supported by the implementing system.
MaxListSize	positiveInteger	1	Y	The maximum size of the candidate list that should be returned.

Response Message

Field	Type	#	?	Meaning
IdentifyResponse			Y	The response to an Identify operation.
IdentifyResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
ReturnData	InformationType	0..1	N	Contains the output data for the response.
Identity	BIASIdentity	0..1	C
EncounterID	BIASIDType	1	Y	The identifier of the encounter, if assigned.
CandidateList	CandidateListType	0..1	C	A rank-ordered list of candidates that have a likelihood of matching the input biometric sample; returned with successful, synchronous processing.
Token	TokenType	0..1	C	A value used to retrieve the results of the Identify request; returned with asynchronous request processing. If set to zero, operation is processed synchronously and candidate list is returned. If set to a non-zero value, operation is processed asynchronously and Get Identify Results must be used to retrieve the results.
TokenValue	string	1	Y	A value returned by the implementing system that is used to retrieve the results to an operation at a later time.
Expiration	date	1	Y	A date and time at which point the token expires and the operation results are no longer guaranteed to be available.

4.2.9 RetrieveData

RetrieveDataRequest

RetrieveDataResponse

The RetrieveData operation retrieves requested information about a subject, or in an encounter-centric model about an encounter. In a person-centric model, this operation can be used to retrieve both biographic and biometric information for a subject record. In an encounter-centric model, this operation can be used to retrieve biographic and/or biometric information for either a single encounter or all encounters. Either a subject ID or encounter ID MUST be specified.

Request Message

Field	Type	#	?	Meaning
RetrieveData			Y	Retrieves requested information about a subject or encounter.
RetrieveDataRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “RetrieveData”.
ProcessingOptions	ProcessingOptionsType	1	Y	Options that guide how the aggregate service request is processed, and MAY identify what type(s) of information should be returned.
Option	OptionType	0..*	N	An option supported by the implementing system.
Identity	BIASIdentity	1	Y	Includes the identifier of the subject or encounter.
SubjectID	BIASIDType	0..1	C	A system unique identifier for a subject. Required if an Encounter ID is not provided.
EncounterID	BIASIDType	0..1	C	The identifier of an encounter associated with the subject. Required if a Subject ID is not provided.

Response Message

Field	Type	#	?	Meaning
RetrieveDataResponse			Y	Response to a RetrieveData operation.
RetrieveDataResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
ReturnData	InformationType	0..1	N	Contains the output data for the response.

4.2.10 Update

UpdateRequest

UpdateResponse

The Update operation updates specified information about a subject, or in an encounter-centric model about an encounter. In a person-centric model, this operation can be used to update both biographic, biometric and document information for a subject record. In an encounter-centric model, this operation can be used to update biographic, biometric and/or document information for either a single encounter or all encounters. Either a subject ID or encounter ID MUST be specified.

Request Message

Field	Type	#	?	Meaning
Update			Y	Updates requested information about a subject or encounter.
UpdateRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “Update”.
ProcessingOptions	ProcessingOptionsType	1	Y	Options that guide how the aggregate service request is processed, and MAY identify what type(s) of information should be returned.
Option	OptionType	0..*	N	An option supported by the implementing system.
InputData	InformationType	1	Y	Contains the subject data to update.
Identity	BIASIdentity	1	Y	Includes the identifier of the subject or encounter.
SubjectID	BIASIDType	0..1	C	The identifier of the subject; Required if an Encounter ID is not provided.
EncounterID	BIASIDType	0..1	C	The identifier of an encounter associated with the subject. Required if a Subject ID is not provided.

Response Message

Field	Type	#	?	Meaning
UpdateResponse			Y	Response to an Update operation.
UpdateResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
ReturnData	InformationType	0..1	N	Contains the output data for the response.
Token	TokenType	0..1	C	A value used to retrieve the results of the Update request; returned with asynchronous request processing. If set to zero, operation is processed synchronously. If set to a non-zero value, operation is processed asynchronously and Get Update Results must be used to retrieve the results.
TokenValue	string	1	Y	A value returned by the implementing system that is used to retrieve the results to an operation at a later time.
Expiration	date	1	Y	A date and time at which point the token expires and the operation results are no longer guaranteed to be available.

4.2.11 Verify

VerifyRequest

VerifyResponse

The Verify operation performs a 1:1 verification function according to system requirements and/or resources. Either the Identity Claim or Reference BIR input parameters are REQUIRED.If the Verify operation is implemented as a synchronous service, the implementing system immediately processes the request and returns the results in the Return Data parameter. If the Verify operation is implemented as an asynchronous service, the implementing system returns a non-zero token in the Token parameter, which is an indication that the request is being handled asynchronously. In this case, the GetVerifyResults operation is used to poll for the results of the Verify request.

In encounter mode, for match operations, the BIAS service provider will create the encounter and will set the encounter type to “recognition”. Additionally the encounter ID may optionally be specified by the caller. If the encounter ID is omitted for the encounter-centric model, the service should return a system-assigned encounter ID.

Request Message

Field	Type	#	?	Meaning
Verify			Y	Performs a 1:1 verification function.
VerifyRequest		1	Y
GenericRequestParameters	GenericRequestParameters	0..1	N	Common request parameters that can be used to identify the requester.
Application	ApplicationIdentifier	0..1	N	Identifies the requesting application.
ApplicationUser	ApplicationUserIdentifier	0..1	N	Identifies the user or instance of the requesting application.
BIASOperationName	string	0..1	N	Identifies the BIAS operation that is being requested: “Verify”.
ProcessingOptions	ProcessingOptionsType	1	Y	Options that guide how the aggregate service request is processed.
Option	OptionType	0..*	N	An option supported by the implementing system.
InputData	InformationType	1	Y	Contains the input data for the aggregate services.
Identity	BIASIdentity	1	Y	Includes either the Identity Claim or Reference BIR.
IdentityClaim	BIASIDType	0..1	C	An identifier by which a subject is known to a particular gallery or population group. Required if a Reference BIR is not provided.
BiometricData	BIASBiometricDataType	0..1	N	An Identity’s biometric data.
ReferenceBIR	CBEFF_BIR_Type	0..1	C	Maps to specific ISO/IEC BIAS elements as required by that specification. Required if an Identity Claim is not provided.
GalleryID	BIASIDType	0..1	C	The identifier of the gallery or population group of which the subject must be a member. Required if an Identity Claim is provided.

Response Message

Field	Type	#	?	Meaning
VerifyResponse			Y	The response to a Verify operation.
VerifyResponsePackage		1	Y
ResponseStatus	ResponseStatus	1	Y	Returned status for the operation.
Return	ReturnCode	1	Y	The return code indicates the return status of the operation.
Message	string	0..1	N	A short message corresponding to the return code.
ReturnData	InformationType	0..1	N	Contains the output data for the response.
Match	boolean	0..1	N	Indicates if the Input BIR matched either the biometric information associated with the Identity Claim or the Reference BIR.
Score	ScoreType	0..1	N	The score if the biometric information matched.
Identity	BIASIdentity	0..1	C
EncounterID	BIASIDType	1	Y	The identifier of the encounter, if assigned.
Token	TokenType	0..1	C	A value used to retrieve the results of the Verify request; returned with asynchronous request processing. If set to zero, operation is processed synchronously. If set to a non-zero value, operation is processed asynchronously and Get Verify Results must be used to retrieve the results.
TokenValue	string	1	Y	A value returned by the implementing system that is used to retrieve the results to an operation at a later time.
Expiration	date	1	Y	A date and time at which point the token expires and the operation results are no longer guaranteed to be available.

5 Message structure and rules

BIAS operations and data elements are defined in XML in the ISO/IEC 30108 BIAS standard. This OASIS standard further specifies the full XML schema (see Annex A) and specifies how this XML is packaged and exchanged as SOAP messages.

Annex A provides a WSDL of operations and structures aggregated from all the conformance classes, both synchronous and asynchronous. A specific implementation’s WSDL must only expose its respective operations and structures. For example, for a Class 5-only conformant implementation, all of the primitive operations must not be exposed as operations (with the exception of QueryCapabilities) unless that functionality is supported. Additionally, the WSDL exposed by an implementation shall not contain instances of xsd:any, xsd:anyType, or xsd:anyAttribute; these instances must be replaced with explicit schema contents. An example is the XML complex type, InformationType, which has xsd:any as its only child. This type is used to represent implementation-specific input data and return data. The children of InformationType must be replaced with explicit content. Doing so removes the ability to transmit unexpected or arbitrary data. Also, it provides a clear definition of information that a client needs to provide to the server,or expect to receive,to optimally perform an operation.

SOAP 1.1 messages consist of three elements: an envelope, header data, and a message body. BIAS request-response elements MUST be enclosed within the SOAP message body. The general structure of the BIAS SOAP message is shown in Figure 4, below. The data model for BIAS is addressed in Section3 and BIAS messages in Section 4.

Figure 4. BIAS SOAP Structure

Biometric data, regardless of native format, is carried as a binary structure. As such, options exist on how this data is carried within the SOAP structure. It can be carried as embedded Base-64 objects or [XOP] can be used – this standard allows for either method (See section 5.3).

5.1 Purpose and constraints

This document defines a SOAP profile describing how the XML elements defined in ISO/IEC 30108 are to be used as the payload of a SOAP message and the rules for structuring and exchanging such messages. Philosophical tenets include:

· SOAP messages will carry BIAS XML [XML10] payloads.

· SOAP messages will follow WS-I and will deviate only when absolutely necessary.

· Message structures and interchanges will be kept as simple as possible – “nice to have” features will be addressed in future revisions.

· XML schemas will be produced based on ISO/IEC 30108.

· BIAS will support a broad range of application domains.

· BIAS will allow for a variety of biometric and biographic data formats to be used

· Only the SOAP messaging will be defined – no message protocols or client/server agents will be defined.

· Basic usage/formatting rules (beyond WS-I) will be defined.

· Existing biometric and Web services standards will be leveraged wherever possible.

· Sample WSDL and use cases will be provided as an aid in implementation.

· Use of basic SOAP will allow all other compatible WS* standards (and discovery mechanisms) to be used in conjunction with BIAS messaging.

· BIAS will support both secure (i.e., using existing security mechanisms such as WS-Security, SAML, etc,) and non-secure implementations.

· Generic biometric operations will be defined – use of biometrics within a Web services authentication protocol is not addressed.

· OASIS namespace rules will be followed, though some external schemas MAY also be referenced.

5.2 Message requirements

BIAS SOAP messages MUST conform to [WS-I-Basic] and [WS-I-Bind]. A single BIAS SOAP message MUST contain only one BIAS service request (or single BIAS service response). Binary components of BIAS messages are already Base-64 encoded and therefore do not need to be conveyed as SOAP attachments (though XOP MAY be utilized).

The system model used for BIAS conversations over SOAP is a simple request-response model. BIAS comprises both synchronous and asynchronous operations, with the majority being of the former type. Asynchronous operations are implemented through message pairs. That is, there are separate messages to request the operation and to request the results of the operation. These have been defined for those operations that are likely to take significant time to complete. For example, an identify operation can be implemented as either a synchronous or asynchronous service as follows:

Figure 5. Example of Synchronous and Asynchronous BIAS Operations

The basic process for using SOAP for BIAS operations is:

A system entity acting as a BIAS requester transmits a BIAS request element within the body of a SOAP message to a system entity acting as a BIAS responder. The BIAS requester MUST NOT include more than one BIAS request per SOAP message or include any additional XML elements in the SOAP body.
The BIAS responder MUST return either a BIAS response element within the body of another SOAP message or generate a SOAP fault. The BIAS responder MUST NOT include more than one BIAS response per SOAP message or include any additional XML elements in the SOAP body. If a BIAS responder cannot, for some reason, process a BIAS request, it MUST generate a SOAP fault. (SOAP 1.1 faults and fault codes are discussed in [SOAP11] section 5.1.)
On receiving a BIAS response in a SOAP message, the BIAS requester MUST NOT send a fault code or other error messages to the BIAS responder. Since the format for the message interchange is a simple request-response pattern, adding additional items such as error conditions would needlessly complicate the protocol.

SOAP 1.1 also defines an optional data encoding system. This system is not used within the BIAS SOAP binding. This means that BIAS messages can be transported using SOAP without re-encoding from the “standard” BIAS schema to one based on the SOAP encoding.

NOTE: [SOAP11] references an early draft of the XML Schema specification including an obsolete namespace. BIAS requesters SHOULD generate SOAP documents referencing only the final XML schema namespace. BIAS responders MUST be able to process both the XML schema namespace used in [SOAP11] as well as the final XML schema namespace.

5.3 Handling binary data

BIAS messages frequently contain binary data (e.g., biometric data, scanned identity documents, etc.). Two methods are provided for dealing with this:

Embedded Base64 encoding
XOP [XOP]

Use of SOAP with Attachments (SWA) is deprecated.

5.3.1 Base64 encoding

This method is the default method for including binary data. Binary data is Base64 encoded and included between the tags in the XML SOAP body for the appropriate data elements. Data elements using this method are indicated as such in the schema.

As an example, the CBEFF_BIR_Type includes, as one of the BIR types, BinaryBIR of type base64binary.

<xsd:element name="BinaryBIR" type="xsd:base64Binary" />

However, even an XML_BIR as defined within [CBEFF3], contains a biometric data block (BDB) which may be entirely binary (most common),

<xsd:element name="bdb" type="xsd:base64Binary" minOccurs="0"/>

or contain an element which is binary (e.g., an image within an XML BDB).

5.3.2 Use of XOP

When XOP is used, the binary content is replaced with a reference (URI) to an attachment (i.e., MIME) which contains that “stripped” content via an xop:include. The advantage of this method is overall message size during transmission since the overhead of the embedded Base64 is not present (since the MIME attachment contains the native binary format).

Use of XOP is generally transparent to the developer, other than in how they configure their toolset. Most frameworks support this; however, there is a possibility of mismatch if the transmitter supports and uses XOP but the receiver does not.

5.4 Discovery

BIAS implementers (service providers) MUST provide WSDL [WSDL11] to describe their implementations. This WSDL MAY or may not be made public via a standard discovery mechanism (such as UDDI) or other method.

In addition, it is REQUIRED that the BIAS implementation include the QueryCapabilities operation to provide dynamic information regarding BIAS capabilities, options, galleries, etc. that are supported.

5.5 Identifying operations

Receivers of BIAS SOAP messages require a method of easily identifying the operation being requested (or response being provided). This SHOULD be possible without the receiver needing to infer it from the sum of the elements provided within the body of the SOAP message. The BIAS SOAP profile allows for two methods of identifying BIAS operations:

Explicit named element in body of the SOAP message
Use of WS-Addressing Action element

5.5.1 Operation name element

The BIAS message sender (requester) will include within the body of the BIAS SOAP message an XML element <BIASOperationName>. The receiver (service provider) can search for this tag within a received BIAS SOAP message to determine what operation is being requested. There is no requirement related to the ordering of this element within the message, though it is RECOMMENDED that it be included early in the message to aid in human readability.

An example of this method for the CreateSubject operation is shown below:

POST /bias HTTP/1.1

Host: www.acme.com

Content-Type: application/soap+xml; charset=”utf-8”

Content-Length: nnnn

SOAPAction: “”

<?xml version=”1.0”?>

<soap:Envelope xmlns:soap=”http://www.w3.org/2003/05/soap-envelope”>

<soap:Body>

<tns:CreateSubjectRequest xmlns:tns=”http://docs.oasis‐open.org/bias/bias‐1.0/”>

<tns:GenericRequestParameters>

<tns:Application>BIAS Application</tns:Application>

<tns:ApplicationUser>BIAS User</tns:ApplicationUser>

<tns:BIASOperationName>CreateSubject</tns:BIASOperationName>

</tns:GenericRequestParameters>

<tns:Identity>

<tns:SubjectID>123456789</tns:SubjectID>

</tns:Identity>

</tns:CreateSubjectRequest>

</soap:Body>

</soap:Envelope>

5.5.2 WS-Addressing Action

WS-Addressing [WS-Addr] provides a mechanism for including action information inside any SOAP message. The information is in the SOAP Header. The WS-Addressing ‘Action’ element is used to indicate the intent of the message. The value is a URI/IRI identifying that intent; however, there are no restrictions on the format or specificity of the URI/IRInor a requirement that it can be resolved. Adoption of this option also requires that the WS-Addressing ‘To’, ‘ReplyTo’, and ‘MessageID’ elements are supplied, as they are mandatory elements in a request-reply message pattern as used within BIAS. Response messages would also need to use WS-Addressing, requiring the ‘To’ (matching the ‘ReplyTo’ element in the request), ‘RelatesTo’ (matching the ‘MessageID’ element in the request), and ‘RelationshipType’ (default value to “wsa:Reply”) elements.

Use of WS-Addressing is OPTIONAL in this profile as is this method of using the ‘Action’ field for this purpose. However, when BIAS is used within an environment using WS-Addressing, it is RECOMMENDED that this approach for use of the ‘Action’ field to carry the BIAS operation name is employed, either alone or in combination with the BIASOperationName approach described in section 5.5.1.

An example for a message request for the CreateSubject operation would look likethe following:

POST /bias HTTP/1.1

Host: www.acme.com

Content-Type: application/soap+xml; charset=”utf-8”

Content-Length: nnnn

SOAPAction: “”

<?xml version=”1.0”?>

<soap:Envelope xmlns:soap=”http://www.w3.org/2003/05/soap-envelope”

xmlns:wsa=”http://schemas.xmlsoap.org/ws/2004/08/addressing”>

<soap:Header>

<wsa:MessageID>some-ID</wsa:MessageID>

<wsa:ReplyTo>

<wsa:Address>response-URI</wsa:Address>

</wsa:ReplyTo>

<wsa:To>destination-URI</wsa:To>

<wsa:Action>CreateSubject</wsa:Action>

</soap:Header>

<soap:Body>

<tns:CreateSubjectRequest

xmlns:tns=”http://docs.oasis‐open.org/bias/bias‐1.0/” />

</soap:Body>

</soap:Envelope>

5.6 Security

The end-points that exchange SOAP messages (or handle the contents of the BIAS operations) are expected to be protected and trusted such that message-level security mechanisms may not be required. The use of SSL (HTTPS) or VPN technology that provides end-point to end-point security is RECOMMENDED and MAY be sufficient in some cases. Other mechanisms such as Signed XML or WSS [WSS] could also be implemented.

Unless stated otherwise, the following security statements apply to all BIAS bindings.

5.6.1 Use of SSL 3.0 or TLS 1.0

Unless otherwise specified, in any BIAS binding’s use of SSL 3.0 [SSL3] or TLS1.0 [RFC2246], servers MUST authenticate clients using a X.509 v3 certificate [X509]. The client MUST establish server identity based on contents of the certificate (typically through examination of the certificate’s subject DN field, subjectAltName attribute, etc.).

Use of transport level security in the form of SSL or TLS is OPTIONAL but highly RECOMMENDED. Use of these mechanisms alone may not be sufficient for end-to-end integrity and confidentiality, however (see 5.6.3 and 5.6.4 below).

5.6.2 Data Origin Authentication

Authentication of both the BIAS requester and the BIAS responder associated with a message is OPTIONAL and depends on the environment of use: Authentication mechanisms available at the SOAP message exchange layer or from the underlying substrate protocol (for example, in many bindings the SSL/TLS or HTTP protocol) MAY be utilized to provide data origin authentication.

Transport authentication will not meet end-to-end origin authentication requirements in bindings where the BIAS SOAP message passes through an intermediary – in this case, message authentication is RECOMMENDED.

Note that SAML [SAML] MAY be used as the mechanism for parties to authenticate to one another.

5.6.3 Message Integrity

Message integrity of both BIAS requests and BIAS responses is OPTIONAL and depends on the environment of use. The security layer in the underlying substrate protocol or a mechanism at the SOAP message exchange layer MAY be used to ensure message integrity.

Transport integrity will not meet end-to-end integrity requirements in bindings where the BIAS SOAP message passes through an intermediary – in this case, message integrity is RECOMMENDED.

5.6.4 Message Confidentiality

Message confidentiality of both BIAS requests and BIAS responses is OPTIONAL and depends on the environment of use. The security layer in the underlying substrate protocol or a mechanism at the SOAP message exchange layer MAY be used to ensure message confidentiality.

Transport confidentiality will not meet end-to-end confidentiality requirements in bindings where the BIAS SOAP message passes through an intermediary.

NOTE: Biometric and biographic data is likely to contain personal information the confidentiality of which SHOULD be protected accordingly. See ISO/IEC 30108, section 6.5 for further discussion.

5.6.5 CBEFF BIR security features

Within BIAS, biometric data is transferred within a CBEFF BIR (as defined in ISO/IEC 19785-1). CBEFF provides for the optional encryption of the Biometric Data Block (BDB) of the BIR and for the integrity of the entire BIR. If implemented, this is indicated in the BIR header. The BIR structure defines an optional Security Block which MAY contain a digital signature (or message authentication code), encryption parameters (e.g., key name, algorithm, etc.), and/or other security related data. Such protections are associated with an individual BIR and are separate from any other protections provided at the message level.

5.6.6 Security Considerations

Before deployment, each combination of authentication, message integrity, and confidentiality mechanisms SHOULD be analyzed for vulnerability in the context of the specific protocol exchange and the deployment environment.

Special care should be given to the impact of possible caching on security.

IETF RFC 2617 [RFC2617] describes possible attacks in the HTTP environment when basic or message digest authentication schemes are used.

Many of the security considerations identified in [SAML SEC] MAY also apply.

ISO/IEC 19092 [BIO SEC] describes a security framework for biometric systems including a minimum set of security requirements addressing integrity, authenticity, and confidentiality of biometric information during transmission and storage. These SHOULD be considered as part of an overall risk management approach.

NOTE: The requirements of ISO/IEC 19092, though useful across many application domains, are required for most biometric system implementations in the financial services environment. Application of this standard would make the requirements of sections 5.5.3 through 5.5.5 mandatory rather than optional. This is highly RECOMMENDED for any high security environment or where privacy concerns exist.

5.6.7 Security of Stored Data

This specification does not address security considerations for stored data. It is the purview of the BIAS service provider to implement security mechanisms and protect data at rest as per their own security policies.

5.6.8 Key Management

This specification does not address key management considerations with respect to implementation of cryptographic security mechanisms (e.g., for authenticity, integrity, or confidentiality).

5.7 Use with other WS* standards

The intent of specifying SOAP bindings for BIAS messages is to enable the full range of existing Web services standards to be able to be applied. Some may be normative while others can be optionally applied (i.e., WS-Security, WS-Addressing). Still others may require additional profiling to be used in an interoperable manner (e.g., WS-Notification); this is left to a future revision. However, the intent is to avoid specifying anything in the first, base version that would preclude the use of such standards in the future.

5.8 Tailoring

This standard provides for a common method of implementing biometric Web services; however, it does not guarantee interoperability in a specific application. In some cases further tailoring or profiling of this standard may be required in order to further constrain the implementation options available.

NOTE: As an example, BIAS allows for a number of different biographic and biometric data formats to be used, whereas a given application/domain MAY wish to limit this to a small set or just one of each type. Other examples (not comprehensive) include:

· Identification of a subset of BIAS operations to be used

· Specification of security features to be implemented (e.g., SSL, CBEFF BIR encryption, etc.)

· Choice of operation name identification method

· Choice of BIR type to be used (XML, non-XML, or URI)

· Further definition of aggregate operations

· Use (or not) of the encounter model

· Use (or not) of asynchronous operations

· Process sequences

· Implementation specific values (e.g., Transform operations/controls)

6 Error handling

There are two levels of errors that can be returned in an error response: system and service errors.

System-level errors occur when the implementing system cannot service a request. They could result due to an internal logic error or because the implementing system does not support a particular request.
Service-level errors occur when there is a problem transmitting or representing the service request. They could result due to an invalid service request or because of a communications error.

The ISO/IEC BIAS standard defines the error condition codes for system-level errors.

If successful, a response message (containing a return code) will be generated.
If unsuccessful, a SOAP fault message (containing a fault code) will be generated.

6.1 BIAS operation return codes

If a BIAS operation is successful, a response (service output) will be sent to the requester by the service provider. Each response message contains a response status (see section 3.2.37) and return code (see section 3.2.38) along with any response data as defined for that operation, if any. A response code of ‘0’ indicates success.

6.2 SOAP fault codes

If a BIAS operation is unsuccessful, no BIAS response message is sent. Instead a SOAP fault message is returned.

Every Web service (operation) described in the BIAS WSDL may result in a fault message that will be returned in the response by the service provider in the event of an error. The fault message contains a FaultCode element as defined by the SOAP 1.1 specification (see section 3.2.5). The fault message MUST contain a Detail element in a common format, as described by the BIASFault element (see section 3.2.6).

The schema provided in Annex A defines “BIASFaultCode” and “BIASFaultDetail” types as well as “BIASFault”, “BIASFaultType”, “BIASFaultMessage” and “BIASFaultDescription” elements.

The list of defined BIAS fault codes is provided in section 3.2.5. Note that BIAS service providers MAY define additional fault codes unique to their service.

NOTE: See also section 5.2 for additional information on message returns and faults.

7 Conformance

Implementations claiming conformance to this standard, MUST implement, at a minimum, all mandatory requirements and provisions set forth in Clauses 3, 4, 5 and 6. If such implementations claim conformance to any OPTIONAL requirements and provisions stated in Clauses 3, 4, 5 and 6, these requirements and provisions MUST be implemented as set forth in these Clauses.

ISO/IEC 30108 [ISO/IEC-BIAS] (Annex A) specifies seven BIAS conformance classes. For each class, a set of mandatory BIAS operations is identified in order for implementations (BIAS service providers) to claim conformance. These categories are:

Class 1: Full Primitive Services Implementation

Class 2: Full Aggregate Services Implementation
Class 3: Limited Primitive Services Implementation
Class 4: Minimum Primitive Services Implementation
Class 5: Minimum Aggregate Services Implementation
Class 6: Matcher Primitive Services Implementation
Class 7: Matcher Aggregate Services Implementation

In addition, the minimum capability information to be returned in response to a Query Capabilities request (the only mandatory BIAS operation across all 5 classes) is specified for each class.

These conformance classes and their associated requirements apply to this BIAS SOAP Profile.

There are no minimum set of operations required to be implemented by BIAS requesters; however, any operations implemented must conform to the requirements of Clauses 3 and 4 and those requirements within Clause 5 that are mandatory and are not specific to BIAS responders.

Appendix A. XML Schema

<?xml version="1.0" encoding="UTF-8"?>

<!--

Biometric Identity Assurance Services (BIAS) SOAP Profile Version 2.0

05 August 2016

-->

<!--

Document: BIAS.xml

Created on: December 17, 2009, 9:31 AM

Last Edit: August 5, 2016 by Kevin Mangold, National Institute of Standards and Technology

Description:

This document represents the WSDL definitions of BIAS Profile.

-->

<wsdl:definitions

xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"

xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"

xmlns:http="http://schemas.xmlsoap.org/wsdl/http/"

xmlns:xsd="http://www.w3.org/2001/XMLSchema"

xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"

xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"

xmlns:cbeff="http://standards.iso.org/iso-iec/19785/-3/ed-2/"

xmlns:iso_3166_1="http://standards.iso.org/iso/3166/-1/ed-3/"

xmlns:tns="http://docs.oasis-open.org/bioserv/ns/bias-2.0"

targetNamespace="http://docs.oasis-open.org/bioserv/ns/bias-2.0">

<wsdl:types>

<xsd:schema elementFormDefault="qualified" targetNamespace="http://docs.oasis-open.org/bioserv/ns/bias-2.0">

<xsd:import namespace="http://standards.iso.org/iso-iec/19785/-3/ed-2/" schemaLocation="cbeff_ed2.xsd"/>

<xsd:import namespace="http://standards.iso.org/iso/3166/-1/ed-3/" schemaLocation="iso_country_codes.xsd"/>

<xsd:complexType name="AggregateRequestTemplate">

<xsd:annotation>

<xsd:documentation>Base template for BIAS aggregate service requests.</xsd:documentation>

</xsd:annotation>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="ProcessingOptions" type="tns:ProcessingOptionsType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Options that guide how the aggregate service request is processed.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="InputData" type="tns:InformationType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Contains the input data for the aggregate service request.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

<xsd:complexType name="AggregateResponseTemplate">

<xsd:annotation>

<xsd:documentation>Base template for BIAS aggregate service responses.</xsd:documentation>

</xsd:annotation>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate">

<xsd:sequence>

<xsd:element name="ReturnData" type="tns:InformationType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Contains the output data for the aggregate service response.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

<xsd:simpleType name="ApplicationIdentifier">

<xsd:annotation>

<xsd:documentation>Identifies an application.</xsd:documentation>

</xsd:annotation>

<xsd:restriction base="xsd:string">

<xsd:minLength value="1"/>

<xsd:maxLength value="255"/>

</xsd:restriction>

</xsd:simpleType>

<xsd:simpleType name="ApplicationUserIdentifier">

<xsd:annotation>

<xsd:documentation>Identifies an application user or instance.</xsd:documentation>

</xsd:annotation>

<xsd:restriction base="xsd:string">

<xsd:minLength value="1"/>

<xsd:maxLength value="255"/>

</xsd:restriction>

</xsd:simpleType>

<xsd:complexType name="BIASBiometricDataType">

<xsd:annotation>

<xsd:documentation>Wraps the various BIAS biometric types.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="BIRList" type="tns:CBEFF_BIR_ListType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A list of CBEFF-BIR elements.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="BIR" type="tns:CBEFF_BIR_Type" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Contains biometric information in either a non-XML and an XML representation.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="InputBIR" type="tns:CBEFF_BIR_Type" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Maps to specific INCITS BIAS elements as required by that specification.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="ReferenceBIR" type="tns:CBEFF_BIR_Type" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Maps to specific INCITS BIAS elements as required by that specification.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="BiometricDataList" type="tns:BiometricDataListType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A list of biometric data elements.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:simpleType name="BIASFaultCode">

<xsd:annotation>

<xsd:documentation>Error code referenced in a SOAP fault. </xsd:documentation>

</xsd:annotation>

<xsd:restriction base="xsd:string">

<xsd:enumeration value="UNKNOWN_ERROR">

<xsd:annotation>

<xsd:documentation>The service failed for an unknown reason.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="UNSUPPORTED_CAPABILITY">

<xsd:annotation>

<xsd:documentation>A requested capability is not supported by the service implementation.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="INVALID_INPUT">

<xsd:annotation>

<xsd:documentation>The data in a service input parameter is invalid.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="BIR_QUALITY_ERROR">

<xsd:annotation>

<xsd:documentation>Biometric sample quality is too poor for the service to succeed.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="INVALID_BIR">

<xsd:annotation>

<xsd:documentation>The input BIR is empty or in an invalid or unrecognized format.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="BIR_SIGNATURE_FAILURE">

<xsd:annotation>

<xsd:documentation>The service could not validate the signature, if used, on the input BIR.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="BIR_DECRYPTION_FAILURE">

<xsd:annotation>

<xsd:documentation>The service could not decrypt an encrypted input BIR.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="INVALID_ENCOUNTER_ID">

<xsd:annotation>

<xsd:documentation>The input encounter ID is empty or in an invalid format.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="INVALID_SUBJECT_ID">

<xsd:annotation>

<xsd:documentation>The input subject ID is empty or in an invalid format.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="UNKNOWN_SUBJECT">

<xsd:annotation>

<xsd:documentation>The subject referenced by the input subject ID does not exist.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="UNKNOWN_GALLERY">

<xsd:annotation>

<xsd:documentation>The gallery referenced by the input gallery ID does not exist.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="UNKNOWN_ENCOUNTER">

<xsd:annotation>

<xsd:documentation>The encounter referenced by the input encounter ID does not exist.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="UNKNOWN_BIOGRAPHIC_FORMAT">

<xsd:annotation>

<xsd:documentation>The biographic data format is not known or not supported.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="UNKNOWN_IDENTITY_CLAIM">

<xsd:annotation>

<xsd:documentation>The identity referenced by the input identity claim does not exist.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="INVALID_IDENTITY_CLAIM">

<xsd:annotation>

<xsd:documentation>The identity claim requested is already in use.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="NONEXISTANT_DATA">

<xsd:annotation>

<xsd:documentation>The data requested for deletion does not exist.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

</xsd:restriction>

</xsd:simpleType>

<xsd:complexType name="BIASFaultDetail">

<xsd:annotation>

<xsd:documentation>Defines the error information associated with a SOAP fault.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element minOccurs="1" maxOccurs="1" name="BIASFaultType" type="tns:BIASFaultCode">

<xsd:annotation>

<xsd:documentation>References an error code.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element minOccurs="1" maxOccurs="1" name="BIASFaultMessage" type="xsd:string">

<xsd:annotation>

<xsd:documentation>Provides an explanation of the fault.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element minOccurs="0" maxOccurs="1" name="BIASFaultDescription" type="xsd:string">

<xsd:annotation>

<xsd:documentation>Provides detailed information about a BIAS fault, such as trace details.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="BIASIdentity">

<xsd:annotation>

<xsd:documentation>

Defines a single element for encapsulating the data associated

with an Identity. Includes the Identity's reference identifiers,

biographic data, and biometric data.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="SubjectID" type="tns:BIASIDType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A system unique identifier for a subject.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="IdentityClaim" type="tns:BIASIDType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>An identifier by which a subject is known to a particular gallery or population group.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="EncounterID" type="tns:BIASIDType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier of an encounter associated with the subject, required for encounter-centric models.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="EncounterList" type="tns:EncounterListType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A list of encounters associated with a subject.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="BiographicData" type="tns:BiographicDataType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>An Identity's biographic data.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<!--<xsd:annotation>

<xsd:documentation>An Identity's biographic data elements that are stored in the implementing system.</xsd:documentation>

</xsd:annotation>

</xsd:element>-->

<xsd:element name="BiometricData" type="tns:BIASBiometricDataType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>An Identity's biometric data.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:simpleType name="BIASIDType">

<xsd:annotation>

<xsd:documentation>A BIAS identifier</xsd:documentation>

</xsd:annotation>

<xsd:restriction base="xsd:string"/>

</xsd:simpleType>

<xsd:complexType name="BiographicDataListType">

<xsd:annotation>

<xsd:documentation>Defines a list of biographic data.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="BiographicData" type="tns:BiographicDataType" minOccurs="0" maxOccurs="unbounded">

<xsd:annotation>

<xsd:documentation>Data structure containing information about a biographic record.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="BiographicDataItemType">

<xsd:annotation>

<xsd:documentation>Defines a single biographic data element.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="Name" type="xsd:string" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The name of the biographic data item.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Type" type="xsd:string" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The data type for the biographic data item.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Value" type="xsd:string" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The value assigned to the biographic data item.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="BiographicDataItemListType">

<xsd:annotation>

<xsd:documentation>Defines a list of biographic data elements.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="BiographicDataItem" type="tns:BiographicDataItemType" minOccurs="1" maxOccurs="unbounded">

<xsd:annotation>

<xsd:documentation>Data structure containing information about a biographic record.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="BiographicDataSetType">

<xsd:annotation>

<xsd:documentation>Defines a set of biographic data that is formatted according to the specified format.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="name" type="xsd:string" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The name of the biographic data format. Use these names for common formats: FBI-EFTS, FBI-EBTS, DOD-EBTS, INT-I, NIEM, xNAL, HR-XML.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="version" type="xsd:string" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The version of the biographic data format (e.g., “7.1" for FBI-EFTS or “2.0" for NIEM).</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="source" type="xsd:string" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Reference to a URI/IRI describing the biographic data format. For example: (FBI-EFTS) www.fbibiospecs.org, (DOD-EBTS) www.biometrics.dod.mil, (INT-I) www.interpol.int, (NIEM) www.niem.gov, (xNAL) www.oasis-open.org, (HR-XML) www.hr-xml.org.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="type" type="xsd:string" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The biographic data format type. Use these types for common formats: ASCII (e.g., for non-XML versions of FBI-EFTS, FBI-EBTS, DOD-EFTS, or INT-I), XML (e.g., for NIEM, xNAL, and HR-XML or future version of FBI-EBTS).</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:any namespace="##any">

<xsd:annotation>

<xsd:documentation>Biographic data formatted according to a specific format.</xsd:documentation>

</xsd:annotation>

</xsd:any>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="BiographicDataType">

<xsd:annotation>

<xsd:documentation>

Defines a set of biographic data elements, utilizing either the

BiographicDataItemType to represent a list of elements or the

BiographicDataSetType to represent a complete, formatted set of

biographic information.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="LastName" type="xsd:string" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The last name of a subject.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="FirstName" type="xsd:string" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The first name of a subject.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="BiographicDataItemList" type="tns:BiographicDataItemListType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A list of biographic data elements.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="BiographicDataItem" type="tns:BiographicDataItemType" minOccurs="1" maxOccurs="unbounded">

<xsd:annotation>

<xsd:documentation>A single biographic data element.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="BiographicDataSet" type="tns:BiographicDataSetType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A set of biographic data information.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="BiometricDataType">

<xsd:annotation>

<xsd:documentation>

Provides descriptive information about biometric data, such as

the biometric type, subtype, and format, contained in the BDB of

the CBEFF-BIR.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="BiometricType" type="cbeff:MultipleTypesType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The type of biological or behavioral data stored in the biometric record, as defined by CBEFF.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="BiometricTypeCount" type="xsd:positiveInteger" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The number of biometric records having the biometric type recorded in the biometric type field.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="BiometricSubType" type="cbeff:SubtypeType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>More specifically defines the type of biometric data stored in the biometric record, as defined by CBEFF.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="BDBFormatOwner" type="xsd:positiveInteger" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the standards body, working group, industry consortium, or other CBEFF biometric organization that has defined the format for the biometric data.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="BDBFormatType" type="xsd:positiveInteger" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the specific biometric data format specified by the CBEFF biometric organization recorded in the BDB Format Owner field.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="BiometricDataListType">

<xsd:annotation>

<xsd:documentation>A list of biometric data elements.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="BiometricData" type="tns:BiometricDataType" minOccurs="0" maxOccurs="unbounded">

<xsd:annotation>

<xsd:documentation>Data structure containing information about a biometric record.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="CandidateListType">

<xsd:annotation>

<xsd:documentation>

Defines a set of candidates, utilizing the Candidate Type to

represent each element in the set.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="Candidate" type="tns:CandidateType" minOccurs="0" maxOccurs="unbounded">

<xsd:annotation>

<xsd:documentation>A single candidate.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="CandidateType">

<xsd:annotation>

<xsd:documentation>

Defines a single candidate as a possible match in response to a

biometric identification request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="ScoreList" minOccurs="0" >

<xsd:complexType>

<xsd:sequence>

<xsd:element name="Score" type="tns:ScoreType"/>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="Identity" type="tns:BIASIdentity" />

<xsd:element name="Rank" type="xsd:integer" minOccurs="1" maxOccurs="1" >

<xsd:annotation>

<xsd:documentation>The rank of the candidate in relation to other candidates for the same biometric identification operation.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="BiographicData" type="tns:BiographicDataType" minOccurs="0" >

<xsd:annotation>

<xsd:documentation>Biographic data associated with the candidate match.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="CapabilityListType">

<xsd:annotation>

<xsd:documentation>Defines a set of capabilities.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="Capability" type="tns:CapabilityType" minOccurs="0" maxOccurs="unbounded">

<xsd:annotation>

<xsd:documentation>A single capability.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:simpleType name="CapabilityName">

<xsd:annotation>

<xsd:documentation>A list of capability items.</xsd:documentation>

</xsd:annotation>

<xsd:restriction base="xsd:string">

<xsd:enumeration value="AggregateInputDataOptional">

<xsd:annotation>

<xsd:documentation>A data element accepted as optional input by the implementing system for the aggregate services.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="AggregateInputDataRequired">

<xsd:annotation>

<xsd:documentation>A data element required as input by the implementing system for the aggregate services.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="AggregateProcessingOption">

<xsd:annotation>

<xsd:documentation>A processing option supported by the implementing system for the aggregate services.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="AggregateReturnData">

<xsd:annotation>

<xsd:documentation>A data element returned by the implementing system for the aggregate services.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="AggregateServiceDescription">

<xsd:annotation>

<xsd:documentation>Describes the processing logic of an aggregate service supported by the implementing system.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="BiographicDataSet">

<xsd:annotation>

<xsd:documentation>Identifies a biographic data set supported by the implementing system.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="CBEFFPatronFormat">

<xsd:annotation>

<xsd:documentation>A patron format supported by the implementing system.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="ClassificationAlgorithmType">

<xsd:annotation>

<xsd:documentation>A classification algorithm type supported by the implementing system.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="ConformanceClass">

<xsd:annotation>

<xsd:documentation>Identifies the conformance class of the BIAS implementation.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="Gallery">

<xsd:annotation>

<xsd:documentation>A gallery or population group supported by the implementing system.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="IdentityModel">

<xsd:annotation>

<xsd:documentation>Identifies whether the implementing system is person-centric or encounter-centric based.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="MatchAlgorithm">

<xsd:annotation>

<xsd:documentation>A match algorithm vendor and algorithm vendor product ID supported by the implementing system.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="MatchScore">

<xsd:annotation>

<xsd:documentation> Identifies the use of match scores returned by the implementing system.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="QualityAlgorithm">

<xsd:annotation>

<xsd:documentation>A quality algorithm vendor and algorithm vendor product ID supported by the implementing system.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="SupportedBiometric">

<xsd:annotation>

<xsd:documentation>A biometric type supported by the implementing system.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="TransformOperation">

<xsd:annotation>

<xsd:documentation>A transform operation type supported by the implementing system.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

</xsd:restriction>

</xsd:simpleType>

<xsd:complexType name="CapabilityType">

<xsd:annotation>

<xsd:documentation>Defines a single capability supported by an implementing system.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="CapabilityName" type="tns:CapabilityName" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The name of the capability.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="CapabilityID" type="xsd:string" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>An identifier assigned to the capability by the implementing system.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="CapabilityDescription" type="xsd:string" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A description of the capability.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="CapabilityValue" type="xsd:string" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A value assigned to the capability.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="CapabilitySupportingValue" type="xsd:string" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A secondary value supporting the capability.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="CapabilityAdditionalInfo" type="xsd:string" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation> Contains additional information for the supported capability.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="CBEFF_BIR_ListType">

<xsd:annotation>

<xsd:documentation>A list of CBEFF-BIR elements.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="BIR" type="tns:CBEFF_BIR_Type" minOccurs="0" maxOccurs="unbounded">

<xsd:annotation>

<xsd:documentation>CBEFF structure containing information about a biometric sample.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="CBEFF_BIR_Type">

<xsd:annotation>

<xsd:documentation>Represents biometric information, with either a non-XML or XML representation.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="FormatOwner" type="xsd:positiveInteger" minOccurs="1" maxOccurs="1"/>

<xsd:element name="FormatType" type="xsd:positiveInteger" minOccurs="1" maxOccurs="1"/>

<xsd:element name="BIR_Information" minOccurs="0" maxOccurs="1">

<xsd:complexType>

<xsd:sequence>

<xsd:element name="BIR_Info" type="cbeff:BIRInfoType" minOccurs="0" maxOccurs="1"/>

<xsd:element name="BDB_Info" type="cbeff:BDBInfoType" minOccurs="0" maxOccurs="1"/>

<xsd:element name="SB_Info" type="cbeff:SBInfoType" minOccurs="0" maxOccurs="1"/>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="BIR" type="tns:BaseBIRType"/>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="BaseBIRType">

</xsd:complexType>

<xsd:complexType name="BinaryBIR">

<xsd:complexContent>

<xsd:extension base="tns:BaseBIRType">

<xsd:sequence>

<xsd:element name="Binary" type="xsd:base64Binary"/>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

<xsd:complexType name="URI_BIR">

<xsd:complexContent>

<xsd:extension base="tns:BaseBIRType">

<xsd:sequence>

<xsd:element name="URI" type="xsd:anyURI"/>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

<xsd:complexType name="XML_BIR">

<xsd:complexContent>

<xsd:extension base="tns:BaseBIRType">

<xsd:sequence>

<xsd:element name="XML" type="cbeff:BIRType"/>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

<xsd:simpleType name="Classification">

<xsd:annotation>

<xsd:documentation>The result of a classification.</xsd:documentation>

</xsd:annotation>

<xsd:restriction base="xsd:string"/>

</xsd:simpleType>

<xsd:simpleType name="ClassificationAlgorithmType">

<xsd:annotation>

<xsd:documentation>Type of classification algorithm that was used to perform the classification.</xsd:documentation>

</xsd:annotation>

<xsd:restriction base="xsd:string"/>

</xsd:simpleType>

<xsd:complexType name="ClassificationData">

<xsd:annotation>

<xsd:documentation>Contains information on classification results and the algorithm used to determine the classification.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="Classification" type="tns:Classification" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The result of the classification.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="ClassificationAlgorithmType" type="tns:ClassificationAlgorithmType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the type of classification algorithm that was used to perform the classification.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="DocumentDataType">

<xsd:annotation>

<xsd:documentation>Defines a set of document data elements providing information about the presented identity document. </xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="DocumentCategory" type="xsd:string" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The type of identity document presented (e.g. passport).</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="DocumentIDNumber" type="xsd:string" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The number associated with the identity document (e.g. passport number).</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="DocumentIssuanceCountryCode" type="iso_3166_1:CountryAlpha2CodeType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The ISO 2-character code for the country which issued the document or from within which it was issued.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="DocumentIssuingOrganization" type="xsd:string" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The entity which issued the identity document.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="DocumentIssuanceDate" type="xsd:dateTime" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The date upon which the identity document was issued.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="DocumentExpirationDate" type="xsd:dateTime" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The date upon which the identity document is no longer valid (expires).</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="DocumentLastName" type="xsd:string" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The family name of the person to whom the identity document was issued, as contained within the document itself.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="DocumentFirstName" type="xsd:string" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The first given name of the person to whom the identity document was issued, as contained within the document itself.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="DocumentMiddleName" type="xsd:string" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The second given name of the person to whom the identity document was issued, as contained within the document itself.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="DocumentValidity" type="xsd:boolean" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The assessed validity of the identity document (e.g. as the result of local or online validity checks).</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="DocumentValidityText" type="xsd:string" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Details or remarks associated with the assessed validity (e.g. description of validity issue).</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="DocumentImage" type="xsd:base64Binary" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A scanned image of the subject document (e.g. passport picture page).</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="DocumentDataListType">

<xsd:annotation>

<xsd:documentation>Defines a list of documents. </xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="DocumentData" type="tns:DocumentDataType" minOccurs="0" maxOccurs="unbounded">

<xsd:annotation>

<xsd:documentation>Data structure containing information about a document and optionally an image of that document.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:simpleType name="EncounterCategoryType">

<xsd:annotation>

<xsd:documentation>Identifies the type of encounter (interaction) during which the identity (biographic, biometric, and/or document) data was collected from the subject as determined by the requester.</xsd:documentation>

</xsd:annotation>

<xsd:restriction base="xsd:string">

<xsd:enumeration value="Enrolment">

<xsd:annotation>

<xsd:documentation>The encounter is created during an enrolment interaction.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="Recognition">

<xsd:annotation>

<xsd:documentation>The encounter is created during a recognition interaction.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:enumeration value="Unspecified">

<xsd:annotation>

<xsd:documentation>The type of encounter is unknown.</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

<xsd:pattern value="([a-zA-Z0-9])+"/>

</xsd:restriction>

</xsd:simpleType>

<xsd:complexType name="EncounterListType">

<xsd:annotation>

<xsd:documentation>Defines a set of encounters.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="EncounterID" type="tns:BIASIDType" minOccurs="0" maxOccurs="unbounded">

<xsd:annotation>

<xsd:documentation>The identifier of an encounter.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="FusionIdentityListType">

<xsd:annotation>

<xsd:documentation>

Contains fusion input elements for one or more identities, utilizing the FusionInformationListType to represent a single set of fusion information for each identity.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="FusionIdentity" type="tns:FusionInformationListType" minOccurs="0" maxOccurs="unbounded">

<xsd:annotation>

<xsd:documentation>A set of fusion information for a single identity.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="FusionInformationListType">

<xsd:annotation>

<xsd:documentation>

Contains at a minimum two sets of fusion input

elements, as input to the PerformFusion request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="FusionElement" type="tns:FusionInformationType" minOccurs="2" maxOccurs="unbounded">

<xsd:annotation>

<xsd:documentation>A set of fusion information.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="FusionInformationType">

<xsd:annotation>

<xsd:documentation>Represents the information necessary to perform a fusion operation.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="BiometricType" type="cbeff:MultipleTypesType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The type of biological or behavioral data stored in the biometric record, as defined by CBEFF.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="BiometricSubType" type="cbeff:SubtypeType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>More specifically defines the type of biometric data stored in the biometric record.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="AlgorithmOwner" type="xsd:string" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The owner or vendor of the algorithm used to determine the score or decision.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="AlgorithmType" type="xsd:string" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The Algorithm Owner's identifier for the specific algorithm product and version used to determine the score or decision.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="FusionResult" type="tns:FusionResult"/>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="FusionResult">

<xsd:sequence/>

</xsd:complexType>

<xsd:complexType name="FusionScore">

<xsd:complexContent>

<xsd:extension base="tns:FusionResult">

<xsd:sequence>

<xsd:element name="Score" type="tns:ScoreType">

<xsd:annotation>

<xsd:documentation>The similarity score assigned by the matching algorithm.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

<xsd:complexType name="FusionDecision">

<xsd:complexContent>

<xsd:extension base="tns:FusionResult">

<xsd:sequence>

<xsd:element name="Decision" type="xsd:string">

<xsd:annotation>

<xsd:documentation>The match decision assigned by the matching algorithm.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

<xsd:complexType name="GenericRequestParameters">

<xsd:annotation>

<xsd:documentation>Common request parameters that can be used to identify the requester.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="Application" type="tns:ApplicationIdentifier" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the requesting application.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="ApplicationUser" type="tns:ApplicationUserIdentifier" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifers the user or instance of the requesting application.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="BIASOperationName" type="xsd:string" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifers the BIAS operation name that is being requested.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="InformationType">

<xsd:annotation>

<xsd:documentation>

Allows for an unlimited number of data element types, and it does

not specify nor require any particular data element.

</xsd:documentation>

</xsd:annotation>

<!-- THE FOLLOWING COMMENTED SECTION IS PROVIDED AS AN INFORMATIVE

EXAMPLE OF WHAT 'InformationType'S CONTENT COULD BE -->

<!-- xsd:sequence>

<xsd:element name="GUID" type="xsd:string" minOccurs="0" />

<xsd:element name="GivenName" type="xsd:string" minOccurs="0" />

<xsd:element name="FamilyName" type="xsd:string" minOccurs="0" />

<xsd:element name="DateOfBirth" type="xsd:string" minOccurs="0" />

<xsd:element name="Sex" type="xsd:string" minOccurs="0" />

<xsd:element name="Citizenship" type="xsd:string" minOccurs="0" />

<xsd:element name="Images" minOccurs="0">

<xsd:complexType>

<xsd:sequence>

<xsd:element name="Image" minOccurs="0" maxOccurs="unbounded">

<xsd:complexType>

<xsd:sequence>

<xsd:element name="ContentType" type="xsd:string" minOccurs="0" />

<xsd:element name="FingerPosition" type="xsd:string" minOccurs="0" />

<xsd:element name="HandPosition" type="xsd:string" minOccurs="0" />

<xsd:element name="ImageData" type="xsd:base64Binary" minOccurs="0" />

</xsd:sequence>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="Identities" minOccurs="0">

<xsd:complexType>

<xsd:sequence>

<xsd:element name="Identity" type="xsd:string" maxOccurs="unbounded" />

</xsd:sequence>

</xsd:complexType>

</xsd:element>

</xsd:sequence-->

</xsd:complexType>

<xsd:complexType name="ListFilterType">

<xsd:annotation>

<xsd:documentation>Provides a method to filter the amount of information returned in a search of biometric data.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="BiometricTypeFilters">

<xsd:complexType>

<xsd:sequence>

<xsd:element name="BiometricTypeFilter" type="cbeff:MultipleTypesType" minOccurs="1" maxOccurs="unbounded">

<xsd:annotation>

<xsd:documentation>Limits the returned information to a specific type of biometric, as defined by CBEFF.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="IncludeBiometricSubtype" type="xsd:boolean" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A Boolean flag indicating if biometric subtype information should be returned.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:simpleType name="MatchType">

<xsd:annotation>

<xsd:documentation>The result of a fusion method.</xsd:documentation>

</xsd:annotation>

<xsd:restriction base="xsd:boolean"/>

</xsd:simpleType>

<xsd:complexType name="OptionType">

<xsd:annotation>

<xsd:documentation>

BIAS aggregate operations support the ability to include various processing options which direct and possibly control the business logic for that operation. Together with the ProcessingOptionsType, The OptionType provides a method to represent those options. Processing options SHOULD be defined by the implementing system.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="Key" type="xsd:string" >

<xsd:annotation>

<xsd:documentation>The identifier of an option supported by the implementing system.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Value" type="xsd:string" minOccurs="0" >

<xsd:annotation>

<xsd:documentation>The value for an option supported by the implementing system.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="ProcessingOptionsType">

<xsd:annotation>

<xsd:documentation>

BIAS aggregate services support the ability to include various

processing options which direct and possibly control the business

logic for that service. The ProcessingOptionsType provides a

method to represent those options. Processing options should be

defined by the implementing system.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="Option" type="tns:OptionType" minOccurs="0" maxOccurs="unbounded">

<xsd:annotation>

<xsd:documentation>An option supported by the implementing system.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:simpleType name="ProductID">

<xsd:annotation>

<xsd:documentation>The vendor's ID for a particular product.</xsd:documentation>

</xsd:annotation>

<xsd:restriction base="xsd:string"/>

</xsd:simpleType>

<xsd:complexType name="QualityData">

<xsd:annotation>

<xsd:documentation>Contains information about a biometric sample's quality and the algorithm used to compute the quality.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="QualityScore" type="cbeff:QualityType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The quality of a biometric sample.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="AlgorithmVendor" type="tns:VendorIdentifier" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The vendor of the qualilty algorithm used to determine the quality score.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="AlgorithmVendorProductID" type="tns:ProductID" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The vendor's ID for the algorithm used to determine the quality.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="AlgorithmVersion" type="tns:VersionType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The version of the algorithm used to determine the quality.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="RequestTemplate">

<xsd:annotation>

<xsd:documentation>Base template for BIAS primitive service requests.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="GenericRequestParameters" type="tns:GenericRequestParameters" minOccurs="0" maxOccurs="1"/>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="ResponseStatus">

<xsd:sequence>

<xsd:element name="Return" type="tns:ReturnCode" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The return code indicates the return status of the operation.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Message" type="xsd:string" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A short message corresponding to the return code.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="ResponseTemplate">

<xsd:annotation>

<xsd:documentation>Base template for BIAS responses.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="ResponseStatus" type="tns:ResponseStatus" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Returned status for the operation.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:simpleType name="ReturnCode">

<xsd:annotation>

<xsd:documentation>BIAS Operation Return Codes</xsd:documentation>

</xsd:annotation>

<xsd:restriction base="xsd:unsignedLong">

<xsd:enumeration value="0">

<xsd:annotation>

<xsd:documentation>Success</xsd:documentation>

</xsd:annotation>

</xsd:enumeration>

</xsd:restriction>

</xsd:simpleType>

<!--<xsd:simpleType name="Score">

<xsd:annotation>

<xsd:documentation>Match result or quality score.</xsd:documentation>

</xsd:annotation>

<xsd:restriction base="xsd:float"/>

</xsd:simpleType>-->

<xsd:complexType name="ScoreType">

<xsd:annotation>

<xsd:documentation>Match result or quality score.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="Value" type="xsd:float"/>

<xsd:element name="BiometricType" type="cbeff:MultipleTypesType" minOccurs="0"/>

<xsd:element name="BiometricSubType" type="cbeff:SubtypeType" minOccurs="0"/>

</xsd:sequence>

</xsd:complexType>

<xsd:complexType name="TokenType">

<xsd:annotation>

<xsd:documentation>Defines a token that is returned for asynchronous processing.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="TokenValue" type="xsd:string" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A value returned by the implementing system that is used to retrieve the results to a service at a later time.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Expiration" type="xsd:date" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A date and time at which point the token expires and the service results are no longer guaranteed to be available.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

<xsd:simpleType name="VendorIdentifier">

<xsd:annotation>

<xsd:documentation>Identifies a vendor.</xsd:documentation>

</xsd:annotation>

<xsd:restriction base="xsd:string"/>

</xsd:simpleType>

<xsd:complexType name="Version">

<xsd:annotation>

<xsd:documentation>

For a description or definition of each data element, see the

referenced CBEFF standards in the CBEFF_XML_BIR_Type schema.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="major" type="xsd:nonNegativeInteger" minOccurs="1" maxOccurs="1"/>

<xsd:element name="minor" type="xsd:nonNegativeInteger" minOccurs="1" maxOccurs="1"/>

</xsd:sequence>

</xsd:complexType>

<xsd:simpleType name="VersionType">

<xsd:annotation>

<xsd:documentation>The version of a component.</xsd:documentation>

</xsd:annotation>

<xsd:restriction base="xsd:string"/>

</xsd:simpleType>

<xsd:element name="AddSubjectToGallery">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="AddSubjectToGalleryRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="GalleryID" type="tns:BIASIDType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier of the gallery or population group to which the subject will be added.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identity to add to the gallery.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="AddSubjectToGalleryResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to an AddSubjectToGallery request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="AddSubjectToGalleryResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate"/>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="CheckQuality">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Calculate a quality score for a given biometric.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="CheckQualityRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="BiometricData" type="tns:BIASBiometricDataType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Data structure containing a single biometric sample for which a quality score is to be determined; required if no SubjectID is provided.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Data structure containing a Subject ID associated with a single biometric sample for which a quality score is to be determined; required if no BIR is provided.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="QualityInfo" type="tns:QualityData" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Specifies a particular algorithm vendor and vender product ID.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="CheckQualityResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a CheckQuality request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="CheckQualityResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate">

<xsd:sequence>

<xsd:element name="QualityInfo" type="tns:QualityData" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Contains the quality information for the submitted biometric sample.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="ClassifyBiometricData">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Classifies a biometric sample.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="ClassifyBiometricDataRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="BiometricData" type="tns:BIASBiometricDataType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Data structure containing a single biometric sample for which the classification is to be determined.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="ClassificationData" type="tns:ClassificationData" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Contains the algorithm to be used to determine the classification.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="ClassifyBiometricDataResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a ClassifyBiometricData request, containing

the classification of a biometric sample.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="ClassifyBiometricDataResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate">

<xsd:sequence>

<xsd:element name="ClassificationData" type="tns:ClassificationData" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Information on the results and type of classification performed.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="CreateEncounter">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Create a new encounter record.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="CreateEncounterRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate"/>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="CreateEncounterResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a CreateEncounter request, containing the encounter

ID of the new encounter record.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="CreateEncounterResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Contains the encounter ID of the new encounter record.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="CreateSubject">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Create a new subject record.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="CreateSubjectRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate"/>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="CreateSubjectResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a CreateSubject request, containing the subject

ID of the new subject record.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="CreateSubjectResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Contains the subject ID of the new subject record.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="DeleteBiographicData">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Erase all of the biographic data associated with a given

subject record or, in the encounter-centric model, with a

given encounter.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="DeleteBiographicDataRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Contains either the subject ID or encounter ID reference.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="GalleryID" type="tns:BIASIDType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier of the gallery or population group from which the biographic information will be deleted.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="DeleteBiographicDataResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a DeleteBiographicData request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="DeleteBiographicDataResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate"/>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="DeleteBiometricData">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Erase all of the biometric data associated with a given

subject record or, in the encounter-centric model, with a

given encounter.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="DeleteBiometricDataRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Contains either the subject ID or encounter ID reference.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="BiometricType" type="cbeff:MultipleTypesType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The type of biological or behavioral data to delete, as defined by CBEFF.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="GalleryID" type="tns:BIASIDType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier of the gallery or population group from which the biometric information will be deleted.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="DeleteBiometricDataResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a DeleteBiometricData request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="DeleteBiometricDataResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate"/>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="DeleteDocumentData">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>Erase all of the document data associated with a given subject record or, in the encounter-centric model, with a given encounter.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="DeleteDocumentDataRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Contains either the subject ID or encounter ID reference.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="DocumentData" type="tns:DocumentDataType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Defines a set of document data elements providing information about the presented identity document. </xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="DeleteDocumentDataResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a DeleteDocumentData request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="DeleteDocumentDataResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate"/>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="DeleteEncounter">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Delete an existing encounter record from the system.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="DeleteEncounterRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Subject ID and encounter ID of the identity to delete.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="DeleteEncounterResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a DeleteEncounter request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="DeleteEncounterResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate"/>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="DeleteSubject">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Delete an existing subject record and, in an encounter-centric

model, any associated encounter information.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="DeleteSubjectRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Subject ID of the identity to delete.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="DeleteSubjectResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a DeleteSubject request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="DeleteSubjectResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate"/>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="DeleteSubjectFromGallery">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Remove the registration of a subject from a gallery or

population group.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="DeleteSubjectFromGalleryRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="GalleryID" type="tns:BIASIDType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier of the gallery or population group from which the subject will be deleted.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identity to remove from the gallery.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="DeleteSubjectFromGalleryResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a DeleteSubjectFromGallery request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="DeleteSubjectFromGalleryResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate"/>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="GetIdentifySubjectResults">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Retrieve the identification results for a specified token,

which was returned by the Identify Subject service.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="GetIdentifySubjectResultsRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Token" type="tns:TokenType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A value used to retrieve the results of an IdentifySubject request.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="GetIdentifySubjectResultsResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a GetIdentifySubjectResults request, which includes a candidate list.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="GetIdentifySubjectResultsResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate">

<xsd:sequence>

<xsd:element name="CandidateList" type="tns:CandidateListType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A rank-ordered list of candidates that have a likelihood of matching the input biometric sample.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="IdentifySubject">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Perform an identification search against a given gallery for

a given biometric.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="IdentifySubjectRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="GalleryID" type="tns:BIASIDType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier of the gallery or population group which will be searched. Must not be used in conjunction with Gallery parameter</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Gallery" type="tns:CandidateListType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A list of BIRs to be used instead of a stored gallery. Must not be used in conjunction with GalleryID parameter.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Contains the BIR, a data structure containing the biometric sample for the search.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="MaxListSize" type="xsd:positiveInteger" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The maximum size of the candidate list that should be returned.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="IdentifySubjectResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to an IdentifySubject request, returning a

rank-ordered candidate list.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="IdentifySubjectResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate">

<xsd:sequence>

<xsd:element name="IdentifySubjectResult" type="tns:IdentifySubjectResultType"/>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:complexType name="IdentifySubjectResultType">

<xsd:sequence/>

</xsd:complexType>

<xsd:complexType name="CandidateListResultType">

<xsd:complexContent>

<xsd:extension base="tns:IdentifySubjectResultType">

<xsd:sequence>

<xsd:element name="CandidateList" type="tns:CandidateListType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A rank-ordered list of candidates that have a likelihood of matching the input biometric sample; returned with successful synchronous request processing.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

<xsd:complexType name="TokenResultType">

<xsd:complexContent>

<xsd:extension base="tns:IdentifySubjectResultType">

<xsd:sequence>

<xsd:element name="Token" type="tns:TokenType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A token used to retrieve the results of the IdentifySubject request; returned with asynchronous request processing.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

<xsd:element name="ListBiographicData">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Lists the biographic data elements stored for a subject.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="ListBiographicDataRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the subject or, in the encounter-centric model, a subject and an encounter.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="EncounterType" type="tns:EncounterCategoryType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the category of encounter. If an encounter ID is not specified

and encounter data exists for the subject, the operation returns the list of encounter IDs of a specific

type which contain biographic data using the Encounter List output parameter, and the Biographic

Data Elements output parameter is empty. Should not be used in conjunction with EncounterID.

</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="ListBiographicDataResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a ListBiographicData request, containing a list

of biographic data elements stored for a subject. In the

encounter-centric model, the biographic data elements for a

specific encounter are returned. If an encounter ID is not

specified and encounter data exists for the subject, the list

of encounter IDs which contain biographic data is returned.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="ListBiographicDataResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>

Contains a list of biographic data elements associated with a

subject or encounter; non-empty if the service was

successful, biographic data exists, and either (a) the

person-centric model is being used or (b) the

encounter-centric model is being used and an encounter

identifier was specified.

</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="ListBiometricData">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Lists the biometric data elements stored for a subject. Note

that no actual biometric data is returned by this service (see

the RetrieveBiometricData service to obtain the biometric

data).

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="ListBiometricDataRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the subject or, in the encounter-centric model, a subject and an encounter.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="EncounterType" type="tns:EncounterCategoryType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the category of encounter. If an encounter ID is not specified and

encounter data exists for the subject, the operation may return the list of encounter IDs of a specific

type which contain biometric data using the Encounter List output parameter, and the Biometric Data

List output parameter is empty. Should not be used in conjunction with EncounterID.

</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="ListFilter" type="tns:ListFilterType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Indicates what biometric information should be returned.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="ListBiometricDataResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a ListBiometricData request, containing a list

of biometric data elements stored for a subject. In the

encounter-centric model, the biometric data elements for a

specific encounter are returned. If an encounter ID is not

specified and encounter data exists for the subject, the list

of encounter IDs which contain biometric data is returned.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="ListBiometricDataResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity">

<xsd:annotation>

<xsd:documentation>

Includes a list of biometric data elements associated

with a subject or encounter or a list of encounter ID's

associated with a subject and which contain biometric

data.

</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="ListDocumentData">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Lists the document categories stored for a subject.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="ListDocumentDataRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the subject or, in the encounter-centric model, a subject and an encounter.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="EncounterType" type="tns:EncounterCategoryType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the category of encounter. If an encounter ID is not specified and encounter data exists for the

subject, the operation shall return the list of encounter IDs which contain document data using the Encounter List Output parameter,

and the Document Data Elements output parameter shall be empty. Should not be used in conjunction with EncounterID.

</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="ListDocumentDataResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a ListDocumentData request, containing a list of document categories stored for a subject.

In the encounter-centric model, an encounterID may be specified to indicate that only document data categories

stored for that encounter should be returned. If an encounter ID is not

specified and encounter data exists for the subject, the list

of encounter IDs which contain document data is returned.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="ListDocumentDataResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate">

<xsd:sequence>

<xsd:element name="DocumentDataList" type="tns:DocumentDataListType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>

A list of document categories associated with a subject or encounter; non-empty if the service

was successful, document data exists, and either the person-centric model is being used or the

encounter-centric model is being used and an encounter identifier was specified.

</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>

A list of encounter IDs associated with a subject and which contain document data; non-empty

if the service was successful, document data exists, the encounter-centric model is being used,

and an encounter identifier was not specified..

</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="PerformFusion">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Accepts either match score or match decision information and creates a fused match result.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="PerformFusionRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="FusionInput" type="tns:FusionIdentityListType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Score or decision input information to the fusion method for each identity.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="PerformFusionResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to the PerformFusion request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="PerformFusionResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate">

<xsd:sequence>

<xsd:element name="Match" type="tns:MatchType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Indicates the result of the fusion method</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="QueryCapabilities">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Returns a list of the capabilities, options, galleries, etc.

that are supported by the BIAS implementation.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="QueryCapabilitiesRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate"/>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="QueryCapabilitiesResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a QueryCapabilities request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="QueryCapabilitiesResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate">

<xsd:sequence>

<xsd:element name="CapabilityList" type="tns:CapabilityListType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A list of capabilities supported by the BIAS implementation.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="RetrieveBiographicData">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Retrieves the biographic data associated with a subject ID.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="RetrieveBiographicDataRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the subject or, in the encounter-centric model, a subject and an encounter.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="EncounterType" type="tns:EncounterCategoryType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the type of encounter during which data was collected from the subject,

as determined by the requester.

</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="GalleryID" type="tns:BIASIDType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier of the gallery or population group from which the biographic information will be retrieved.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="RetrieveBiographicDataResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a RetrieveBiographicData request,

containing the biographic data associated with a subject ID. In

the encounter-centric model, the biographic data associated with

a specified encounter is returned. If the encounter ID is not

specified in the encounter-centric model, the biographic

information associated with the most recent encounter is returned.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="RetrieveBiographicDataResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Includes the set of biographic data associated with a subject.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="RetrieveBiometricData">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Retrieves the biometric data associated with a subject ID.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="RetrieveBiometricDataRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the subject or, in the encounter-centric model, a subject and an encounter.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="EncounterType" type="tns:EncounterCategoryType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the type of encounter during which data was collected from the subject,

as determined by the requester.

</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="GalleryID" type="tns:BIASIDType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier of the gallery or population group from which the biometric information will be retrieved.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="BiometricType" type="cbeff:MultipleTypesType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The type of biological or behavioral data to retrieve.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="RetrieveBiometricDataResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a RetrieveBiometricData request,

containing the biometric data associated with a subject ID. In

the encounter-centric model, the biometric data associated with

a specified encounter is returned. If the encounter ID is not

specified in the encounter-centric model, the biometric

information associated with the most recent encounter is returned.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="RetrieveBiometricDataResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Includes the biometric data associated with a subject.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="RetrieveDocumentData">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>Retrieves the list of document data associated with a subject ID for the category(ies) specified. </xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="RetrieveDocumentDataRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Contains either the subject ID or encounter ID reference.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="DocumentData" type="tns:DocumentDataType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Defines a set of document data elements providing information about the requested identity document. </xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="EncounterType" type="tns:EncounterCategoryType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the category of encounter.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="GalleryID" type="tns:BIASIDType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier of the gallery or population group from which the biographic information will be retrieved. </xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="RetrieveDocumentDataResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a RetrieveDocumentData request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="RetrieveDocumentDataResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate"/>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

<xsd:element name="DocumentDataList" type="tns:DocumentDataListType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A list of document data associated with a subject or encounter</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="SetBiographicData">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Associates biographic data to a given subject record.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="SetBiographicDataRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the subject or, in the encounter-centric model, a subject and an encounter, and includes the biographic data to store.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="GalleryID" type="tns:BIASIDType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier of the gallery or population group to which the biographic will be added.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="SetBiographicDataResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a SetBiographicData request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="SetBiographicDataResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>In an encounter-centric model, identifies the encounter ID assigned to a new encounter.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="SetBiometricData">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Associates biometric data to a given subject record.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="SetBiometricDataRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the subject or, in the encounter-centric model, a subject and an encounter, and includes the biometric data to store.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="GalleryID" type="tns:BIASIDType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier of the gallery or population group to which the biometric will be added.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="SetBiometricDataResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a SetBiometricData request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="SetBiometricDataResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>In an encounter-centric model, identifies the encounter ID assigned to a new encounter.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="SetDocumentData">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Associates document data to a given subject record.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="SetDocumentDataRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the subject or, in the encounter-centric model, a subject and an encounter, and includes the document data to store.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="GalleryID" type="tns:BIASIDType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier of the gallery or population group to which the document data will be added.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="DocumentDataList" type="tns:DocumentDataListType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Defines a set of document data elements to associate with the subject or encounter. </xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="SetDocumentDataResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a SetDocumentData request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="SetDocumentDataResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>In an encounter-centric model, identifies the encounter ID assigned to a new encounter.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="TransformBiometricData">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Transforms or processes a given biometric in one format into a new target format.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="TransformBiometricDataRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="InputBIR" type="tns:CBEFF_BIR_Type" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Data structure containing the biometric information to be transformed.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="TransformOperation" type="xsd:unsignedLong" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Value indicating the type of transformation to perform.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="TransformControl" type="xsd:string" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation> Specifies controls for the requested transform operation.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="TransformBiometricDataResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a TransformBiometricData request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="TransformBiometricDataResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate">

<xsd:sequence>

<xsd:element name="OutputBIR" type="tns:CBEFF_BIR_Type" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Data structure containing the new, transformed biometric information.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="UpdateBiographicData">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Updates the biographic data for a given subject record.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="UpdateBiographicDataRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the subject or, in the encounter-centric model, a subject and an encounter, and includes the biographic data to update.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="UpdateBiographicDataResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to an UpdateBiographicData request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="UpdateBiographicDataResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate"/>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="UpdateBiometricData">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Updates a single biometric sample for a given subject record.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="UpdateBiometricDataRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the subject or, in the encounter-centric model, a subject and an encounter, and includes the biometric data to update.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Merge" type="xsd:boolean" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Value indicating if the input biometric sample should be merged with any existing biometric information.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="UpdateBiometricDataResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to an UpdateBiometricData request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="UpdateBiometricDataResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate"/>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="UpdateDocumentData">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Updates the document data for a given subject record.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="UpdateDocumentDataRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Identifies the subject or, in the encounter-centric model, a subject and an encounter, and includes the document data to update.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="DocumentDataList" type="tns:DocumentDataListType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Defines a set of updated document data elements to associate with the subject or encounter. </xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="UpdateDocumentDataResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to an UpdateDocumentData request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="UpdateDocumentDataResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate"/>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="VerifySubject">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

Performs a 1:1 verification match between a given biometric and

either a claim to identity in a given gallery or another given

biometric.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="VerifySubjectRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="GalleryID" type="tns:BIASIDType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier of the gallery or population group of which the subject must be a member.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Includes the identifying information and/or input and reference biometric samples.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="VerifySubjectResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The response to a VerifySubject request.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="VerifySubjectResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate">

<xsd:sequence>

<xsd:element name="Match" type="xsd:boolean" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Indicates if the Input BIR matched either the biometric information associated with the Identity Claim or the Reference BIR.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Score" type="tns:ScoreType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The score if the biometric information matched.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="Delete">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The Delete operation deletes an existing subject or, in an encounter-centric model, an existing encounter from the

system.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="DeleteRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:AggregateRequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier for the subject, or in encounter-centric model the encounter to be

deleted; required for encounter-centric models.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="DeleteResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>The response to an Delete request.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="DeleteResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:AggregateResponseTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier for the subject, or in encounter-centric model, the encounter being deleted;

required for encounter-centric models.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Token" type="tns:TokenType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A value used to retrieve the results of the Delete request.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="Enroll">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The Enroll aggregate service adds a new subject or, in an

encounter-centric model, a new encounter to the system.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="EnrollRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:AggregateRequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier for the encounter; required for encounter-centric models.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="EnrollResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>The response to an Enroll request.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="EnrollResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:AggregateResponseTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier for the encounter; required for encounter-centric models.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Token" type="tns:TokenType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A value used to retrieve the results of the Enroll request.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="GetDeletionResults">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The GetDeletionResults operation retrieves the deletion results for the specified token.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="GetDeletionResultsRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Token" type="tns:TokenType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A value used to retrieve the results of the Deletion request.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="GetDeletionResultsResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>The response to a GetDeletionResults request.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="GetDeletionResultsResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:ResponseTemplate">

<xsd:sequence>

<xsd:element name="ReturnData" type="tns:InformationType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Contains the output data for the response.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="GetEnrollResults">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The GetEnrollResults aggregate service retrieves the enrollment

results for the specified token.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="GetEnrollResultsRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Token" type="tns:TokenType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A value used to retrieve the results of the Enroll request.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="GetEnrollResultsResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>The response to a GetEnrollResults request.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="GetEnrollResultsResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:AggregateResponseTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier for the subject, and in encounter-centric models, the encounter.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="GetIdentifyResults">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The GetIdentifyResults aggregate service retrieves the

identification results for the specified token.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="GetIdentifyResultsRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Token" type="tns:TokenType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A value used to retrieve the results of the Identify request.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="GetIdentifyResultsResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>The response to a GetIdentifyResults request.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="GetIdentifyResultsResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:AggregateResponseTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier of the encounter, if assigned.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="CandidateList" type="tns:CandidateListType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A rank-ordered list of candidates that have a likelihood of matching the

input biometric sample.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="GetUpdateResults">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The GetUpdateResults operation retrieves the update results for the specified token.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="GetUpdateResultsRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Token" type="tns:TokenType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A value used to retrieve the results of the Update request.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="GetUpdateResultsResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>The response to a GetUpdateResults request.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="GetUpdateResultsResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:AggregateResponseTemplate">

<xsd:sequence>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="GetVerifyResults">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The GetVerifyResults aggregate service retrieves the verification

results for the specified token.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="GetVerifyResultsRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="Token" type="tns:TokenType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A value used to retrieve the results of the Verify request.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="GetVerifyResultsResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>The response to a GetVerifyResults request.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="GetVerifyResultsResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:AggregateResponseTemplate">

<xsd:sequence>

<xsd:element name="Match" type="xsd:boolean" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Indicates if the Input BIR matched either the biometric information

associated with the Identity Claim or the Reference BIR.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Score" type="tns:ScoreType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The score if the biometric information matched.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier of the encounter, if assigned.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="Identify">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The Identify aggregate service performs an identification

function according to system requirements and/or resources.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="IdentifyRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:AggregateRequestTemplate">

<xsd:sequence>

<xsd:element name="GalleryID" type="tns:BIASIDType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier of the gallery or population group which will be searched.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="MaxListSize" type="xsd:positiveInteger" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The maximum size of the candidate list that should be returned.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="IdentifyResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>The response to an Identify request.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="IdentifyResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:AggregateResponseTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier of the encounter, if assigned.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="CandidateList" type="tns:CandidateListType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A rank-ordered list of candidates that have a likelihood of matching the input

biometric sample; returned with successful, synchronous processing.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Token" type="tns:TokenType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A value used to retrieve the results of the Identify request.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="RetrieveData">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The RetrieveData aggregate service retrieves requested

information about a subject, or in an encounter-centric model

about an encounter.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="RetrieveDataRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:RequestTemplate">

<xsd:sequence>

<xsd:element name="ProcessingOptions" type="tns:ProcessingOptionsType" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Options that guide how the service request is processed, and may identify what

type(s) of information should be returned.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Includes the identifier of the subject or encounter.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="RetrieveDataResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>The response to a RetrieveData request.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="RetrieveDataResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:AggregateResponseTemplate"/>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="Update">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The Update operation updates specified information about a subject, or in an

encounter-centric model about an encounter.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="UpdateRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:AggregateRequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Includes the identifier of the subject or encounter.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="UpdateResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>The response to a Update request.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="UpdateResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:AggregateResponseTemplate">

<xsd:sequence>

<xsd:element name="Token" type="tns:TokenType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A value used to retrieve the results of the Update request.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="Verify">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>

The Verify aggregate service performs a 1:1 verification

function according to system requirements and/or resources.

Either the IdentityClaim or ReferenceBIR input data elements in

the Identity parameter are required.

</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="VerifyRequest" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:AggregateRequestTemplate">

<xsd:sequence>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="1" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Includes either the IdentityClaim or ReferenceBIR.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="GalleryID" type="tns:BIASIDType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier of the gallery or population group of which the subject must be a member.</xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="VerifyResponse">

<xsd:complexType>

<xsd:annotation>

<xsd:documentation>The response to a Verify request.</xsd:documentation>

</xsd:annotation>

<xsd:sequence>

<xsd:element name="VerifyResponsePackage" nillable="true">

<xsd:complexType>

<xsd:complexContent>

<xsd:extension base="tns:AggregateResponseTemplate">

<xsd:sequence>

<xsd:element name="Match" type="xsd:boolean" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>Indicates if the Input BIR matched either the biometric information

associated with the Identity Claim or the Reference BIR.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Score" type="tns:ScoreType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The score if the biometric information matched.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Identity" type="tns:BIASIdentity" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>The identifier of the encounter, if assigned.</xsd:documentation>

</xsd:annotation>

</xsd:element>

<xsd:element name="Token" type="tns:TokenType" minOccurs="0" maxOccurs="1">

<xsd:annotation>

<xsd:documentation>A value used to retrieve the results of the Verify request; </xsd:documentation>

</xsd:annotation>

</xsd:element>

</xsd:sequence>

</xsd:extension>

</xsd:complexContent>

</xsd:complexType>

</xsd:element>

</xsd:sequence>

</xsd:complexType>

</xsd:element>

<xsd:element name="BIASFault" type="tns:BIASFaultDetail"/>

</xsd:schema>

</wsdl:types>

<wsdl:message name="BIASFaultMessage">

<wsdl:part name="parameters" element="tns:BIASFault"/>

</wsdl:message>

<wsdl:message name="AddSubjectToGalleryRequestMessage">

<wsdl:part name="parameters" element="tns:AddSubjectToGallery"/>

</wsdl:message>

<wsdl:message name="AddSubjectToGalleryResponseMessage">

<wsdl:part name="parameters" element="tns:AddSubjectToGalleryResponse"/>

</wsdl:message>

<wsdl:message name="CheckQualityRequestMessage">

<wsdl:part name="parameters" element="tns:CheckQuality"/>

</wsdl:message>

<wsdl:message name="CheckQualityResponseMessage">

<wsdl:part name="parameters" element="tns:CheckQualityResponse"/>

</wsdl:message>

<wsdl:message name="ClassifyBiometricDataRequestMessage">

<wsdl:part name="parameters" element="tns:ClassifyBiometricData"/>

</wsdl:message>

<wsdl:message name="ClassifyBiometricDataResponseMessage">

<wsdl:part name="parameters" element="tns:ClassifyBiometricDataResponse"/>

</wsdl:message>

<wsdl:message name="CreateSubjectRequestMessage">

<wsdl:part name="parameters" element="tns:CreateSubject"/>

</wsdl:message>

<wsdl:message name="CreateSubjectResponseMessage">

<wsdl:part name="parameters" element="tns:CreateSubjectResponse"/>

</wsdl:message>

<wsdl:message name="DeleteBiographicDataRequestMessage">

<wsdl:part name="parameters" element="tns:DeleteBiographicData"/>

</wsdl:message>

<wsdl:message name="DeleteBiographicDataResponseMessage">

<wsdl:part name="parameters" element="tns:DeleteBiographicDataResponse"/>

</wsdl:message>

<wsdl:message name="DeleteBiometricDataRequestMessage">

<wsdl:part name="parameters" element="tns:DeleteBiometricData"/>

</wsdl:message>

<wsdl:message name="DeleteBiometricDataResponseMessage">

<wsdl:part name="parameters" element="tns:DeleteBiometricDataResponse"/>

</wsdl:message>

<wsdl:message name="DeleteSubjectRequestMessage">

<wsdl:part name="parameters" element="tns:DeleteSubject"/>

</wsdl:message>

<wsdl:message name="DeleteSubjectResponseMessage">

<wsdl:part name="parameters" element="tns:DeleteSubjectResponse"/>

</wsdl:message>

<wsdl:message name="DeleteSubjectFromGalleryRequestMessage">

<wsdl:part name="parameters" element="tns:DeleteSubjectFromGallery"/>

</wsdl:message>

<wsdl:message name="DeleteSubjectFromGalleryResponseMessage">

<wsdl:part name="parameters" element="tns:DeleteSubjectFromGalleryResponse"/>

</wsdl:message>

<wsdl:message name="GetIdentifySubjectResultsRequestMessage">

<wsdl:part name="parameters" element="tns:GetIdentifySubjectResults"/>

</wsdl:message>

<wsdl:message name="GetIdentifySubjectResultsResponseMessage">

<wsdl:part name="parameters" element="tns:GetIdentifySubjectResultsResponse"/>

</wsdl:message>

<wsdl:message name="IdentifySubjectRequestMessage">

<wsdl:part name="parameters" element="tns:IdentifySubject"/>

</wsdl:message>

<wsdl:message name="IdentifySubjectResponseMessage">

<wsdl:part name="parameters" element="tns:IdentifySubjectResponse"/>

</wsdl:message>

<wsdl:message name="ListBiographicDataRequestMessage">

<wsdl:part name="parameters" element="tns:ListBiographicData"/>

</wsdl:message>

<wsdl:message name="ListBiographicDataResponseMessage">

<wsdl:part name="parameters" element="tns:ListBiographicDataResponse"/>

</wsdl:message>

<wsdl:message name="ListBiometricDataRequestMessage">

<wsdl:part name="parameters" element="tns:ListBiometricData"/>

</wsdl:message>

<wsdl:message name="ListBiometricDataResponseMessage">

<wsdl:part name="parameters" element="tns:ListBiometricDataResponse"/>

</wsdl:message>

<wsdl:message name="PerformFusionRequestMessage">

<wsdl:part name="parameters" element="tns:PerformFusion"/>

</wsdl:message>

<wsdl:message name="PerformFusionResponseMessage">

<wsdl:part name="parameters" element="tns:PerformFusionResponse"/>

</wsdl:message>

<wsdl:message name="QueryCapabilitiesRequestMessage">

<wsdl:part name="parameters" element="tns:QueryCapabilities"/>

</wsdl:message>

<wsdl:message name="QueryCapabilitiesResponseMessage">

<wsdl:part name="parameters" element="tns:QueryCapabilitiesResponse"/>

</wsdl:message>

<wsdl:message name="RetrieveBiographicDataRequestMessage">

<wsdl:part name="parameters" element="tns:RetrieveBiographicData"/>

</wsdl:message>

<wsdl:message name="RetrieveBiographicDataResponseMessage">

<wsdl:part name="parameters" element="tns:RetrieveBiographicDataResponse"/>

</wsdl:message>

<wsdl:message name="RetrieveBiometricDataRequestMessage">

<wsdl:part name="parameters" element="tns:RetrieveBiometricData"/>

</wsdl:message>

<wsdl:message name="RetrieveBiometricDataResponseMessage">

<wsdl:part name="parameters" element="tns:RetrieveBiometricDataResponse"/>

</wsdl:message>

<wsdl:message name="SetBiographicDataRequestMessage">

<wsdl:part name="parameters" element="tns:SetBiographicData"/>

</wsdl:message>

<wsdl:message name="SetBiographicDataResponseMessage">

<wsdl:part name="parameters" element="tns:SetBiographicDataResponse"/>

</wsdl:message>

<wsdl:message name="SetBiometricDataRequestMessage">

<wsdl:part name="parameters" element="tns:SetBiometricData"/>

</wsdl:message>

<wsdl:message name="SetBiometricDataResponseMessage">

<wsdl:part name="parameters" element="tns:SetBiometricDataResponse"/>

</wsdl:message>

<wsdl:message name="TransformBiometricDataRequestMessage">

<wsdl:part name="parameters" element="tns:TransformBiometricData"/>

</wsdl:message>

<wsdl:message name="TransformBiometricDataResponseMessage">

<wsdl:part name="parameters" element="tns:TransformBiometricDataResponse"/>

</wsdl:message>

<wsdl:message name="UpdateBiographicDataRequestMessage">

<wsdl:part name="parameters" element="tns:UpdateBiographicData"/>

</wsdl:message>

<wsdl:message name="UpdateBiographicDataResponseMessage">

<wsdl:part name="parameters" element="tns:UpdateBiographicDataResponse"/>

</wsdl:message>

<wsdl:message name="UpdateBiometricDataRequestMessage">

<wsdl:part name="parameters" element="tns:UpdateBiometricData"/>

</wsdl:message>

<wsdl:message name="UpdateBiometricDataResponseMessage">

<wsdl:part name="parameters" element="tns:UpdateBiometricDataResponse"/>

</wsdl:message>

<wsdl:message name="VerifySubjectRequestMessage">

<wsdl:part name="parameters" element="tns:VerifySubject"/>

</wsdl:message>

<wsdl:message name="VerifySubjectResponseMessage">

<wsdl:part name="parameters" element="tns:VerifySubjectResponse"/>

</wsdl:message>

<wsdl:message name="EnrollRequestMessage">

<wsdl:part name="parameters" element="tns:Enroll"/>

</wsdl:message>

<wsdl:message name="EnrollResponseMessage">

<wsdl:part name="parameters" element="tns:EnrollResponse"/>

</wsdl:message>

<wsdl:message name="GetEnrollResultsRequestMessage">

<wsdl:part name="parameters" element="tns:GetEnrollResults"/>

</wsdl:message>

<wsdl:message name="GetEnrollResultsResponseMessage">

<wsdl:part name="parameters" element="tns:GetEnrollResultsResponse"/>

</wsdl:message>

<wsdl:message name="GetIdentifyResultsRequestMessage">

<wsdl:part name="parameters" element="tns:GetIdentifyResults"/>

</wsdl:message>

<wsdl:message name="GetIdentifyResultsResponseMessage">

<wsdl:part name="parameters" element="tns:GetIdentifyResultsResponse"/>

</wsdl:message>

<wsdl:message name="GetVerifyResultsRequestMessage">

<wsdl:part name="parameters" element="tns:GetVerifyResults"/>

</wsdl:message>

<wsdl:message name="GetVerifyResultsResponseMessage">

<wsdl:part name="parameters" element="tns:GetVerifyResultsResponse"/>

</wsdl:message>

<wsdl:message name="IdentifyRequestMessage">

<wsdl:part name="parameters" element="tns:Identify"/>

</wsdl:message>

<wsdl:message name="IdentifyResponseMessage">

<wsdl:part name="parameters" element="tns:IdentifyResponse"/>

</wsdl:message>

<wsdl:message name="RetrieveDataRequestMessage">

<wsdl:part name="parameters" element="tns:RetrieveData"/>

</wsdl:message>

<wsdl:message name="RetrieveDataResponseMessage">

<wsdl:part name="parameters" element="tns:RetrieveDataResponse"/>

</wsdl:message>

<wsdl:message name="VerifyRequestMessage">

<wsdl:part name="parameters" element="tns:Verify"/>

</wsdl:message>

<wsdl:message name="VerifyResponseMessage">

<wsdl:part name="parameters" element="tns:VerifyResponse"/>

</wsdl:message>

<wsdl:portType name="BIAS_v2">

<wsdl:operation name="AddSubjectToGallery">

<wsdl:input name="AddSubjectToGallery" message="tns:AddSubjectToGalleryRequestMessage"/>

<wsdl:output name="AddSubjectToGalleryResponse" message="tns:AddSubjectToGalleryResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="CheckQuality">

<wsdl:input name="CheckQuality" message="tns:CheckQualityRequestMessage"/>

<wsdl:output name="CheckQualityResponse" message="tns:CheckQualityResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="ClassifyBiometricData">

<wsdl:input name="ClassifyBiometricData" message="tns:ClassifyBiometricDataRequestMessage"/>

<wsdl:output name="ClassifyBiometricDataResponse" message="tns:ClassifyBiometricDataResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="CreateSubject">

<wsdl:input name="CreateSubject" message="tns:CreateSubjectRequestMessage"/>

<wsdl:output name="CreateSubjectResponse" message="tns:CreateSubjectResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="DeleteBiographicData">

<wsdl:input name="DeleteBiographicData" message="tns:DeleteBiographicDataRequestMessage"/>

<wsdl:output name="DeleteBiographicDataResponse" message="tns:DeleteBiographicDataResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="DeleteBiometricData">

<wsdl:input name="DeleteBiometricData" message="tns:DeleteBiometricDataRequestMessage"/>

<wsdl:output name="DeleteBiometricDataResponse" message="tns:DeleteBiometricDataResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="DeleteSubject">

<wsdl:input name="DeleteSubject" message="tns:DeleteSubjectRequestMessage"/>

<wsdl:output name="DeleteSubjectResponse" message="tns:DeleteSubjectResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="DeleteSubjectFromGallery">

<wsdl:input name="DeleteSubjectFromGallery" message="tns:DeleteSubjectFromGalleryRequestMessage"/>

<wsdl:output name="DeleteSubjectFromGalleryResponse" message="tns:DeleteSubjectFromGalleryResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="GetIdentifySubjectResults">

<wsdl:input name="GetIdentifySubjectResults" message="tns:GetIdentifySubjectResultsRequestMessage"/>

<wsdl:output name="GetIdentifySubjectResultsResponse" message="tns:GetIdentifySubjectResultsResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="IdentifySubject">

<wsdl:input name="IdentifySubject" message="tns:IdentifySubjectRequestMessage"/>

<wsdl:output name="IdentifySubjectResponse" message="tns:IdentifySubjectResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="ListBiographicData">

<wsdl:input name="ListBiographicData" message="tns:ListBiographicDataRequestMessage"/>

<wsdl:output name="ListBiographicDataResponse" message="tns:ListBiographicDataResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="ListBiometricData">

<wsdl:input name="ListBiometricData" message="tns:ListBiometricDataRequestMessage"/>

<wsdl:output name="ListBiometricDataResponse" message="tns:ListBiometricDataResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="PerformFusion">

<wsdl:input name="PerformFusion" message="tns:PerformFusionRequestMessage"/>

<wsdl:output name="PerformFusionResponse" message="tns:PerformFusionResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="QueryCapabilities">

<wsdl:input name="QueryCapabilities" message="tns:QueryCapabilitiesRequestMessage"/>

<wsdl:output name="QueryCapabilitiesResponse" message="tns:QueryCapabilitiesResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="RetrieveBiographicData">

<wsdl:input name="RetrieveBiographicData" message="tns:RetrieveBiographicDataRequestMessage"/>

<wsdl:output name="RetrieveBiographicDataResponse" message="tns:RetrieveBiographicDataResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="RetrieveBiometricData">

<wsdl:input name="RetrieveBiometricData" message="tns:RetrieveBiometricDataRequestMessage"/>

<wsdl:output name="RetrieveBiometricDataResponse" message="tns:RetrieveBiometricDataResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="SetBiographicData">

<wsdl:input name="SetBiographicData" message="tns:SetBiographicDataRequestMessage"/>

<wsdl:output name="SetBiographicDataResponse" message="tns:SetBiographicDataResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="SetBiometricData">

<wsdl:input name="SetBiometricData" message="tns:SetBiometricDataRequestMessage"/>

<wsdl:output name="SetBiometricDataResponse" message="tns:SetBiometricDataResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="TransformBiometricData">

<wsdl:input name="TransformBiometricData" message="tns:TransformBiometricDataRequestMessage"/>

<wsdl:output name="TransformBiometricDataResponse" message="tns:TransformBiometricDataResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="UpdateBiographicData">

<wsdl:input name="UpdateBiographicData" message="tns:UpdateBiographicDataRequestMessage"/>

<wsdl:output name="UpdateBiographicDataResponse" message="tns:UpdateBiographicDataResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="UpdateBiometricData">

<wsdl:input name="UpdateBiometricData" message="tns:UpdateBiometricDataRequestMessage"/>

<wsdl:output name="UpdateBiometricDataResponse" message="tns:UpdateBiometricDataResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="VerifySubject">

<wsdl:input name="VerifySubject" message="tns:VerifySubjectRequestMessage"/>

<wsdl:output name="VerifySubjectResponse" message="tns:VerifySubjectResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="Enroll">

<wsdl:input name="Enroll" message="tns:EnrollRequestMessage"/>

<wsdl:output name="EnrollResponse" message="tns:EnrollResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="GetEnrollResults">

<wsdl:input name="GetEnrollResults" message="tns:GetEnrollResultsRequestMessage"/>

<wsdl:output name="GetEnrollResultsResponse" message="tns:GetEnrollResultsResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="GetIdentifyResults">

<wsdl:input name="GetIdentifyResults" message="tns:GetIdentifyResultsRequestMessage"/>

<wsdl:output name="GetIdentifyResultsResponse" message="tns:GetIdentifyResultsResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="GetVerifyResults">

<wsdl:input name="GetVerifyResults" message="tns:GetVerifyResultsRequestMessage"/>

<wsdl:output name="GetVerifyResultsResponse" message="tns:GetVerifyResultsResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="Identify">

<wsdl:input name="Identify" message="tns:IdentifyRequestMessage"/>

<wsdl:output name="IdentifyResponse" message="tns:IdentifyResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="RetrieveData">

<wsdl:input name="RetrieveData" message="tns:RetrieveDataRequestMessage"/>

<wsdl:output name="RetrieveDataResponse" message="tns:RetrieveDataResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

<wsdl:operation name="Verify">

<wsdl:input name="Verify" message="tns:VerifyRequestMessage"/>

<wsdl:output name="VerifyResponse" message="tns:VerifyResponseMessage"/>

<wsdl:fault name="BIASFault" message="tns:BIASFaultMessage"/>

</wsdl:operation>

</wsdl:portType>

<wsdl:binding name="BIAS_v2HttpBinding" type="tns:BIAS_v2">

<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>

<wsdl:operation name="AddSubjectToGallery">

<soap:operation soapAction="AddSubjectToGallery"/>

<wsdl:input name="AddSubjectToGallery">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="AddSubjectToGalleryResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="CheckQuality">

<soap:operation soapAction="CheckQuality"/>

<wsdl:input name="CheckQuality">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="CheckQualityResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="ClassifyBiometricData">

<soap:operation soapAction="ClassifyBiometricData"/>

<wsdl:input name="ClassifyBiometricData">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="ClassifyBiometricDataResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="CreateSubject">

<soap:operation soapAction="CreateSubject"/>

<wsdl:input name="CreateSubject">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="CreateSubjectResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="DeleteBiographicData">

<soap:operation soapAction="DeleteBiographicData"/>

<wsdl:input name="DeleteBiographicData">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="DeleteBiographicDataResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="DeleteBiometricData">

<soap:operation soapAction="DeleteBiometricData"/>

<wsdl:input name="DeleteBiometricData">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="DeleteBiometricDataResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="DeleteSubject">

<soap:operation soapAction="DeleteSubject"/>

<wsdl:input name="DeleteSubject">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="DeleteSubjectResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="DeleteSubjectFromGallery">

<soap:operation soapAction="DeleteSubjectFromGallery"/>

<wsdl:input name="DeleteSubjectFromGallery">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="DeleteSubjectFromGalleryResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="GetIdentifySubjectResults">

<soap:operation soapAction="GetIdentifySubjectResults"/>

<wsdl:input name="GetIdentifySubjectResults">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="GetIdentifySubjectResultsResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="IdentifySubject">

<soap:operation soapAction="IdentifySubject"/>

<wsdl:input name="IdentifySubject">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="IdentifySubjectResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="ListBiographicData">

<soap:operation soapAction="ListBiographicData"/>

<wsdl:input name="ListBiographicData">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="ListBiographicDataResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="ListBiometricData">

<soap:operation soapAction="ListBiometricData"/>

<wsdl:input name="ListBiometricData">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="ListBiometricDataResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="PerformFusion">

<soap:operation soapAction="PerformFusion"/>

<wsdl:input name="PerformFusion">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="PerformFusionResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="QueryCapabilities">

<soap:operation soapAction="QueryCapabilities"/>

<wsdl:input name="QueryCapabilities">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="QueryCapabilitiesResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="RetrieveBiographicData">

<soap:operation soapAction="RetrieveBiographicData"/>

<wsdl:input name="RetrieveBiographicData">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="RetrieveBiographicDataResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="RetrieveBiometricData">

<soap:operation soapAction="RetrieveBiometricData"/>

<wsdl:input name="RetrieveBiometricData">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="RetrieveBiometricDataResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="SetBiographicData">

<soap:operation soapAction="SetBiographicData"/>

<wsdl:input name="SetBiographicData">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="SetBiographicDataResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="SetBiometricData">

<soap:operation soapAction="SetBiometricData"/>

<wsdl:input name="SetBiometricData">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="SetBiometricDataResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="TransformBiometricData">

<soap:operation soapAction="TransformBiometricData"/>

<wsdl:input name="TransformBiometricData">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="TransformBiometricDataResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="UpdateBiographicData">

<soap:operation soapAction="UpdateBiographicData"/>

<wsdl:input name="UpdateBiographicData">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="UpdateBiographicDataResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="UpdateBiometricData">

<soap:operation soapAction="UpdateBiometricData"/>

<wsdl:input name="UpdateBiometricData">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="UpdateBiometricDataResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="VerifySubject">

<soap:operation soapAction="VerifySubject"/>

<wsdl:input name="VerifySubject">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="VerifySubjectResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="Enroll">

<soap:operation soapAction="Enroll"/>

<wsdl:input name="Enroll">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="EnrollResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="GetEnrollResults">

<soap:operation soapAction="GetEnrollResults"/>

<wsdl:input name="GetEnrollResults">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="GetEnrollResultsResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="GetIdentifyResults">

<soap:operation soapAction="GetIdentifyResults"/>

<wsdl:input name="GetIdentifyResults">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="GetIdentifyResultsResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="GetVerifyResults">

<soap:operation soapAction="GetVerifyResults"/>

<wsdl:input name="GetVerifyResults">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="GetVerifyResultsResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="Identify">

<soap:operation soapAction="Identify"/>

<wsdl:input name="Identify">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="IdentifyResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="RetrieveData">

<soap:operation soapAction="RetrieveData"/>

<wsdl:input name="RetrieveData">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="RetrieveDataResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

<wsdl:operation name="Verify">

<soap:operation soapAction="Verify"/>

<wsdl:input name="Verify">

<soap:body use="literal"/>

</wsdl:input>

<wsdl:output name="VerifyResponse">

<soap:body use="literal"/>

</wsdl:output>

<wsdl:fault name="BIASFault">

<soap:fault name="BIASFault" use="literal"/>

</wsdl:fault>

</wsdl:operation>

</wsdl:binding>

<wsdl:service name="BIAS_v2">

<wsdl:port name="BIAS_v2HttpBindingPort" binding="tns:BIAS_v2HttpBinding">

<soap:address location="http://your_URI/IRI_to_your_BIAS_implementation"/>

</wsdl:port>

</wsdl:service>

</wsdl:definitions>

Name	Affiliation
Mr. Young Bang	Booz Allen Hamilton
Mr. Ed. Clay	Sun
Mr. Murty Gurajada *	Raining Data Corporation
Mr. Dale Hapeman	US Department of Defense
Dr. Charles Li	Raytheon
Mr. Kevin Mangold	NIST
Mr. John Mayer-Splain	US Department of Homeland Security
Dr. Ross Michaels	NIST
Mr. Ramesh Nagappan	Sun
Mr. Ash Parikh *	Raining Data Corporation
Mr. Matthew Swayze	Daon
Mr. Guy Swope*	Raytheon
Mrs. Catherine Tilton	Daon
Mr. Alessandro Triglia*	OSS Nokalva
Mr. Matthew Young	US Department of Defense
Mr. Brad Wing	NIST (formerly DHS)
Mr. Michael Wittman*	Raytheon
Mr. Gregory Zektser	Booz Allen Hamilton

Revision	Date	Editor	Changes Made
WD 1	2015-XX-XX	Kevin Mangold