This document specifies conformance clauses in accordance
with the OASIS TC Process ([TC-PROC] section 2.2.6 for the KMIP Specification
[KMIP-SPEC] for a KMIP server or KMIP client through profiles that define the
use of KMIP objects, attributes, operations, message elements and
authentication methods within specific contexts of KMIP server and client
interaction.
These profiles define a set of normative constraints for
employing KMIP within a particular environment or context of use. They may,
optionally, require the use of specific KMIP functionality or in other respects
define the processing rules to be followed by profile actors.
This specification is provided under the RF on
RAND Terms Mode of the OASIS IPR Policy,
the mode chosen when the Technical Committee was established. For information
on whether any patents have been disclosed that may be essential to
implementing this specification, and any offers of patent licensing terms,
please refer to the Intellectual Property Rights section of the TC’s web page (https://www.oasis-open.org/committees/kmip/ipr.php).
The key words "MUST", "MUST NOT", "REQUIRED",
"SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT",
"RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119]
and [RFC8174] when, and only when, they appear in all
capitals, as shown here.
[KMIP-SPEC] Key Management Interoperability Protocol Specification
Version 2.1. Edited by Tony Cox and
Charles White. Latest version: <https://docs.oasis-open.org/kmip/kmip-spec/v2.1/kmip-spec-v2.1.html>.
[RFC2119] Bradner,
S., "Key words for use in RFCs to Indicate Requirement Levels", BCP
14, RFC 2119, DOI 10.17487/RFC2119, March 1997, <http://www.rfc-editor.org/info/rfc2119>.
[RFC2818] E. Rescorla,
HTTP over TLS, IETF RFC 2818, May 2000,<http://www.rfc-editor.org/info/rfc2818>.
[RFC5246] T. Dierks &
E. Rescorla, The Transport Layer Security (TLS) Protocol, Version 1.2, IETF RFC
5246, August 2008, <http://www.rfc-editor.org/info/rfc5246>.
[RFC7159] Bray, T., Ed.,
The JavaScript Object Notation (JSON) Data Interchange Format, RFC 7159, March
2014, <http://www.rfc-editor.org/info/rfc7159>.
[RFC8174] Leiba, B., "Ambiguity of
Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI
10.17487/RFC8174, May 2017, <http://www.rfc-editor.org/info/rfc8174>.
[RFC8446] E. Rescorla, The
Transport Layer Security (TLS) Protocol Version 1.3, IETF RFC 8446, August
2018, <http://www.rfc-editor.org/info/rfc8446>.
[XML] Bray, Tim, et.al. eds, Extensible Markup Language (XML) 1.0
(Fifth Edition), W3C Recommendation 26 November 2008, <http://www.w3.org/TR/2008/REC-xml-20081126>.
[RFC2246] T.
Dierks & C. Allen, The TLS Protocol, Version 1.0, IETF RFC 2246, January
1999, <http://www.rfc-editor.org/info/rfc2246>.
[RFC4346] T.
Dierks & E. Rescorla, The Transport Layer Security (TLS) Protocol, Version
1.1, IETF RFC 4346, April 2006, <http:www.rfc-editor.org/info/rfc4346>.
[TC-PROC] OASIS TC
Process. 1 July 2017. OASIS Process, <https://www.oasis-open.org/policies-guidelines/tc-process>.
[XML-SCHEMA] Paul V. Biron, Ashok Malhotra, XML Schema Part 2: Datatypes
Second Edition, W3C Recommendation 26 November 2008, <https://www.w3.org/TR/2004/REC-xmlschema-2-20041028>.
This document defines a list of KMIP Profiles. A profile may
be standalone or may be specified in terms of changes relative to another
profile.
The following items SHALL be addressed by each profile.
1. Specify
the versions of the KMIP specification (protocol versions) that SHALL be
supported if versions other than [KMIP-SPEC] are supported
2. Specify
the list of Objects that SHALL be supported
3. Specify
the list of Authentication Suites that SHALL be supported
4. Specify
the list of Object Attributes that SHALL be supported
5. Specify
the list of Operations that SHALL be supported
6. Specify
any other requirements that SHALL be supported
7. Specify
the mandatory test cases that SHALL be supported by conforming implementations
Specify the optional test cases that MAY be supported by
conforming implementations
Any vendor or organization, such as other standards bodies,
MAY create a KMIP Profile and publish it.
1.
The profile SHALL be publicly available.
2.
The KMIP Technical Committee SHALL be
formally advised of the availability of the profile and the location of the
published profile.
3.
The profile SHALL meet all the
requirements of section 2.1
4.
The KMIP Technical Committee SHOULD review
the profile prior to final publication.
This section contains the list of the channel security,
channel options, and server and client authentication requirements for a KMIP
profile. Other Authentication Suites MAY be defined for other KMIP Profiles.
An Authentication Suite provides at least the following:
1.
All communication over the security
channel SHALL provide confidentiality and integrity
2.
All communication over the security
channel SHALL provide assurance of server authenticity
3.
All communication over the security
channel SHALL provide assurance of client authenticity
4.
All options such as channel protocol
version and cipher suites for the secuity channel SHALL be specified
When using automated
client provisioning, the assurance of server authenticity and client
authenticity MAY be provided via means outside of the security channel
protocol.
This authentication suite stipulates that a profile
conforming to the Basic Authentication Suite SHALL use TLS to negotiate a secure
channel.
Conformant KMIP servers SHALL support:
·
TLS v1.3 [RFC8446]
Conformant KMIP clients SHOULD support:
·
TLS v1.3 [RFC8446]
Conformant KMIP servers SHOULD support:
·
TLS v1.2 [RFC5246]
Conformant KMIP clients MAY support:
·
TLS v1.2 [RFC5246]
Conformant KMIP clients or servers SHALL NOT support:
·
TLS v1.1 [RFC4346]
·
TLS v1.0 [RFC2246]
·
Any version of the SSL protocol
Conformant KMIP servers SHALL support all of the following
cipher suites for TLSv1.3 if TLSv1.3 is supported:
- TLS13-CHACHA20-POLY1305-SHA256
- TLS13-AES-256-GCM-SHA384
Conformant KMIP clients SHALL support at least one of the
following cipher suites for TLSv1.3 if TLSv1.3 is supported:
- TLS13-CHACHA20-POLY1305-SHA256
- TLS13-AES-256-GCM-SHA384
Conformant KMIP clients or servers SHALL support the
following cipher suites for TLSv1.2 if TLSv1.2 is supported:
·
TLS_RSA_WITH_AES_256_CBC_SHA256
·
TLS_RSA_WITH_AES_128_CBC_SHA256
Conformant KMIP clients or servers
MAY support the following cipher suites for TLSv1.2 if TLSv1.2 is supported:
·
TLS_RSA_WITH_AES_128_CBC_SHA
·
TLS_RSA_WITH_AES_256_CBC_SHA
·
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA
·
TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256
·
TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384
·
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
·
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
·
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
·
TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256
·
TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384
·
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
·
TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
·
TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
·
TLS_PSK_WITH_AES_128_CBC_SHA
·
TLS_PSK_WITH_AES_256_CBC_SHA
·
TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
·
TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
·
TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
·
TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384
Conformant KMIP clients or servers SHALL NOT support any
cipher suite not listed above.
Conformant KMIP servers SHALL require the use of channel
(TLS) mutual authentication to provide assurance of client authenticity for all
operations except when using automated client provisioning.
Conformant KMIP servers SHALL use the identity derived from
the channel mutual authentication to determine the client identity if the KMIP
client requests do not contain an Authentication object.
Conformant KMIP servers SHALL use the identity derived from
the Credential information to determine the client identity if the KMIP client
requests contain an Authentication object.
The exact mechanisms determining the client identity are
outside the scope of this specification.
Conformant KMIP servers SHALL use TCP port number 5696, as
assigned by IANA.
3.2 HTTPS Authentication
Suite
This authentication suite stipulates that a profile
conforming to the HTTPS Authentication Suite SHALL use HTTP over TLS [RFC2818] to
negotiate a secure channel.
Conformant KMIP servers and clients SHALL handle client
authenticity in accordance with Basic Authentication Protocols (3.1.1).
Conformant KMIP servers and clients SHALL handle client
authenticity in accordance with Basic Authentication Cipher Suites (3.1.2).
Conformant KMIP servers and clients SHALL handle client
authenticity in accordance with Basic Authentication Client Authenticity (3.1.3).
KMIP servers conformant to this profile SHOULD use TCP port
number 5696, as assigned by IANA, to receive and send KMIP messages provided
that both HTTPS and non-HTTPS encoded messages are supported.
KMIP clients SHALL enable end user configuration of the TCP
port number used, as a KMIP server MAY specify a different TCP port number for
HTTPS usage.
The test cases define a number of request-response pairs for
KMIP operations. Each test case is provided in the XML format specified in XML Encoding (5.4.1) intended to be both human-readable and usable by automated
tools.
Each test case has a unique label (the section name) which
includes indication of mandatory (-M-) or optional (-O-) status and the
protocol version major and minor numbers as part of the identifier.
The test cases may depend on a specific configuration of a
KMIP client and server being configured in a manner consistent with the test
case assumptions.
Where possible the flow of unique identifiers between tests,
the date-time values, and other dynamic items are indicated using symbolic
identifiers – in actual request and response messages these dynamic values will
be filled in with valid values.
Symbolic identifiers are of the form $UPPERCASE_NAME
followed by optional unique index value. Wherever a symbolic identifier occurs
in a test cases the implementation must replace it with a reasonable appearing
datum of the expected type. Time values can be specified in terms of an offset
from the current time in seconds of the form $NOW or $NOW-n or $NOW+n.
Note: the values for the returned items and the custom
attributes are illustrative. Actual values from a real client or server system may
vary as specified in section 4.1.
4.1
Permitted Test Case Variations
Whilst the test cases provided in a Profile define the
allowed request and response content, some inherent variations MAY occur and
are permitted within a successfully completed test case.
Each test case MAY include allowed variations in the
description of the test case in addition to the variations noted in this
section.
Other variations not explicitly noted in this section SHALL
be deemed non-conformant.
An implementation conformant to a Profile MAY vary the
following values:
- Unique Identifier
- Private Key Unique Identifier
- Public Key Unique Identifier
- Unique Batch Item ID
- Asynchronous Correlation Value
- Time Stamp
- Key Value / Key Material including:
- key material content returned for managed cryptographic
objects which are generated by the server
- wrapped versions of keys where the wrapping key is
dynamic, or the wrapping contains variable output for each wrap operation
- For response containing the output of cryptographic
operation in Data / Signature Data/ MAC Data / IV Counter Nonce where:
- the managed object is generated by the server; or
- the operation inherently contains variable output
- For the following DateTime attributes where the value is
not specified in the request as a fixed DateTime value:
- Activation Date
- Archive Date
- Compromise Date
- Compromise Occurrence Date
- Deactivation Date
- Destroy Date
- Initial Date
- Last Change Date
- Protect Start Date
- Process Stop Date
- Validity Date
- Original Creation Date
- Linked Object Identifier
- Digest Value
- For those managed cryptographic objects which are
dynamically generated
- Key Format Type
- The key format type selected by the server when it
creates managed objects except when the key format type is specified in
the request or there is a default value required in the specification and
in which case the value must match.
- Digest
a. The
Hashing Algorithm selected by the server when it calculates the digest for a
managed object for which it has access to the key material provided that a
Digest is always available with the Hashing Algorithm of SHA256 (the default)
b. The Digest
Value
- Extensions reported in Query for function Query Extension
List and Query Extension Map
- Application Namespaces reported in Query for function
Query Application Namespaces
- Object Types reported in Query other than those noted as
required in the profile
- Operation Types reported in Query other than those noted
as required in the profile
- For TextString attribute values containing test
identifiers:
a. Additional
vendor or application prefixes
- Server Correlation Value
- Client Correlation Value
- Additional attributes beyond those noted in the response
An implementation conformant to a Profile MAY allow the
following response variations:
- Object Group values – May or may not return one or more
Object Group values not included in the requests
- Vendor Attributes – May or may not include additional
server-specific associated attributes not included in requests
- Message Extensions – May or may not include additional
(non-critical) vendor extensions
- Result Message – May or may not be included in responses
and the value (if included) may vary from the text contained within the
test case.
- The list of Protocol Versions returned in a Discover
Version response may include additional protocol versions if the request
has not specified a list of client supported Protocol Versions.
- Vendor Identification - The value (if included) may vary
from the text contained within the test case.
- Random Number Generator – The value returned may vary from
the value returned including any of the defined values for the RNG
Algorithm field within the Random Number Generator attribute including
Unspecified. The other fields within the Random Number Generator (all of
which are defined as optional) may be present or omitted and their value
each field may be set to any value that is permitted for such a field.
- Located Items – The field MAY be present in responses to
Locate even if an Offset Items field is not present in the request.
- Server Information – the contents of the structure
returned MAY vary although the structure itself SHALL be present if
specified in the response.
An implementation conformant to a Profile SHALL allow
variation of the following behavior:
- A test may omit the clean-up requests and responses
(containing Revoke and/or Destroy) at the end of the test provided there
is a separate mechanism to remove the created objects during testing.
- A test may omit the test identifiers if the client is
unable to include them in requests. This includes the following
attributes:
- Name (where the name includes the test
identifier); and
- InteropIdentifier
- A test MAY perform requests with multiple batch items or
as multiple requests with a single batch item provided the sequence of
operations are logically equivalent
- A request MAY contain an optional Authentication
[KMIP_SPEC] structure within each request
- The order of Attributes returned in a Get Attributes
operation is not specified in [KMIP-SPEC] and an implementation MAY return
the list of items in any order provided all noted items are present. Any
permutation of the order of the required entries is allowed.
- For all profiles in each Batch Item of a client
request including multiple batch items (i.e. Batch Count is greater than
one) the Unique Batch Item ID must be specified. Unique Batch
Item ID MAY be specified for client requests containing a single batch
item (Batch Count equals one) or MAY be omitted. Any reasonable
appearing datum of the expected type is permitted.
- A test MAY be preceded by a request containing the
Operation Interop with the Interop Function set to Begin
- A test MAY be followed by a request containing the
Operation Interop with the Interop Function set to End
- Use of the Operation Interop is optional (it is not
expected that production KMIP clients will support the Interop Operation)
however the use of the Interop function during a formal interop
test event may be mandatory (depending on the rules of the specific
interop event).
A Baseline Client provides some of the most basic
functionality that is expected of a conformant KMIP client – the ability to request
information about the server.
An implementation is a conforming Baseline Client if it
meets the following conditions:
- Supports the conditions required by the KMIP Client
Implementation Conformance clauses [KMIP-SPEC]
- Supports the following Attribute Data Structures
[KMIP-SPEC]:
- Attributes
- Supports the following Object Attributes
[KMIP-SPEC]:
- Activation Date
- Deactivation Date
- Digest
- Initial Date
- Last Change Date
- Object Type
- State
- Unique Identifier
- Supports the following Client-to-Server Operations
[KMIP-SPEC]:
- Get
- Get Attributes
- Locate
- Query
- Supports the following Message Data Structures
[KMIP-SPEC]:
- Asynchronous Indicator
- Batch Count
- Batch Error Continuation
Option
- Batch Item
- Batch Order Option
- Maximum Response Size
- Message Extension
- Operation
- Protocol Version
- Result Reason
- Result Status
- Server Correlation Value
- Time Stamp
- Unique Batch Item ID
- Supports the Message
Protocols [KMIP-SPEC]
- Authentication
- Transport
- TTLV
- Optionally
supports any clause within [KMIP-SPEC] that is not listed above.
- Optionally
supports extensions outside the scope of this standard (e.g., vendor
extensions, conformance clauses) that do not contradict any KMIP
requirements
A Baseline Server provides the most basic functionality that
is expected of a conformant KMIP server – the ability to provide information
about the server and the managed objects supported by the server.
An implementation is a conforming Baseline Server if it
meets the following conditions:
- Supports the conditions required by the KMIP Server
Implementation Conformance clauses [KMIP-SPEC]
- Supports the following Attribute Data Structures
[KMIP-SPEC]:
- Attributes
- Supports the following Message Data Structures
[KMIP-SPEC]:
- Credential
- Supports the following Object Data Structures
[KMIP-SPEC]:
- Key Block
- Key Value
- Supports the following Operations Data Structures
[KMIP-SPEC]:
- Capability Information
- Defaults Information
- Extension Information
- Profile Information
- RNG Parameters
- Server Information
- Validation Information
- Supports the following Object Attributes
[KMIP-SPEC]:
- Activation Date
- Alternative Name
- Always Sensitive
- Comment
- Compromise Date
- Compromise Occurrence Date
- Cryptographic Algorithm
- Cryptographic Length
- Cryptographic Parameters
- Cryptographic Usage Mask
- Deactivation Date
- Description
- Digest
- Extractable
- Fresh
- Initial Date
- Key Value Location
- Key Value Present
- Last Change Date
- Lease Time
- Link
- Name
- Never Extractable
- Object Group
- Object Type
- Original Creation Date
- Process Start Date
- Protect Stop Date
- Protection Storage Mask
- Random Number Generator
- Revocation Reason
- Sensitive
- State
- Usage Limits
- Unique Identifier
- Supports the following Client-to-Server Operations
[KMIP-SPEC]
a.
Activate
b.
Add Attribute
c.
Adjust Attribute
d.
Check
e.
Delete Attribute
f.
Destroy
g.
Discover Versions
h.
Export
i.
Get
j.
Get Attribute List
k.
Get Attributes
l.
Import
m.
Interop
n.
Modify Attribute
o.
Locate
p.
Log
q.
Query
r.
Register
s.
Revoke
t.
Set Attribute
u.
Set Endpoint Role
- Supports Server-to-Client Operations [KMIP-SPEC]
a.
Discover Versions
b.
Notify
c.
Put
d.
Query
e.
Set Endpoint Role
- Supports the following Message Data Structures
[KMIP-SPEC]:
- Asynchronous Indicator
- Attestation Capable
Indicator
- Batch Count
- Batch Error Continuation
Option
- Batch Item
- Batch Order Option
- Client Correlation Value
- Maximum Response Size
- Message Extension
- Operation
- Protocol Version
- Result Reason
- Result Status
- Server Correlation Value
- Time Stamp
- Unique Batch Item ID
- Supports the Message
Protocols [KMIP-SPEC]
- Authentication
- Transport
- TTLV
- Optionally supports extensions outside the scope of this
standard (e.g., vendor extensions, conformance clauses) that do not
contradict any KMIP requirements
See test-cases/kmip-v2.1/mandatory/BL-M-1-21.xml.
See test-cases/kmip-v2.1/mandatory/BL-M-2-21.xml.
See test-cases/kmip-v2.1/mandatory/BL-M-3-21.xml.
See test-cases/kmip-v2.1/mandatory/BL-M-4-21.xml.
See test-cases/kmip-v2.1/mandatory/BL-M-5-21.xml.
See test-cases/kmip-v2.1/mandatory/BL-M-6-21.xml.
See test-cases/kmip-v2.1/mandatory/BL-M-7-21.xml.
See test-cases/kmip-v2.1/mandatory/BL-M-8-21.xml.
See test-cases/kmip-v2.1/mandatory/BL-M-9-21.xml.
See test-cases/kmip-v2.1/mandatory/BL-M-10-21.xml.
See test-cases/kmip-v2.1/mandatory/BL-M-11-21.xml.
See test-cases/kmip-v2.1/mandatory/BL-M-12-21.xml.
See test-cases/kmip-v2.1/mandatory/BL-M-13-21.xml.
5.2 Complete Server
Profile
A Complete Server provides functionality that is expected of
a conformant KMIP server that implements the entire specification.
An implementation is a conforming Complete Server if it
meets the following conditions:
- Supports KMIP Server Implementation Conformance
[KMIP-SPEC]
- Supports Objects [KMIP-SPEC]
- Supports Object Data Structures [KMIP-SPEC]
- Supports Object Attributes [KMIP-SPEC]
- Supports Attribute Data Structures [KMIP-SPEC]
- Supports Operations [KMIP-SPEC]
- Supports Operations Data Structures [KMIP-SPEC]
- Supports Messages [KMIP-SPEC]
- Supports Message Data Structures [KMIP-SPEC]
- Supports Message Protocols [KMIP-SPEC]
- Supports Enumerations [KMIP-SPEC]
- Supports Bit Masks [KMIP-SPEC]
- Optionally supports extensions outside the scope of this
standard (e.g., vendor extensions, conformance clauses) that do not
contradict any KMIP requirements
The Hypertext Transfer Protocol over Transport Layer
Security (HTTPS) is simply the use of HTTP over TLS in the same manner that
HTTP is used over TCP.
KMIP over HTTPS is simply the use of KMIP messages over
HTTPS in the same manner that KMIP is used over TLS.
KMIP clients conformant to this profile:
- SHALL support HTTP/1.0 and/or HTTP/1.1 over TLS conformant
to [RFC2818]
- SHALL use the POST request method
- SHOULD support the value /kmip as the target URI.
- SHALL enable end user configuration of the target URI used
as a KMIP server MAY specify a different target URI.
- SHALL specify a Content-Type of “application/octet-stream”
if the message encoding is TTLV
- SHALL specify a Content-Type of “text/xml" if the
message encoding is XML
- SHALL specify a Content-Type of “application/json" if
the message encoding is JSON
- SHALL specify a Content-Length
- SHALL specify a Cache-Control of “no-cache”
- SHALL send KMIP TTLV message in binary format as the body
of the HTTP request
KMIP clients that support responding to server to client
operations SHALL behave as a HTTPS server.
KMIP servers conformant to this profile:
- SHALL support HTTP/1.0 and HTTP/1.1 over TLS conformant to
[RFC2818]
- SHALL return HTTP response code 200 if a KMIP response is
available
- SHOULD support the value /kmip as the target URI.
- SHALL specify a Content-Type of “application/octet-stream”
if the message encoding is TTLV
- SHALL specify a Content-Type of “text/xml" if the
message encoding is XML
- SHALL specify a Content-Type of “application/json" if
the message encoding is JSON
- SHALL specify a Content-Length
- SHALL specify a Cache-Control of “no-cache”
- SHALL send KMIP TTLV message in binary format as the body
of the HTTP request
KMIP servers that support server to client operations SHALL
behave as a HTTPS client.
Perform a Query operation, querying the Operations and
Objects supported by the server, with a restriction on the Maximum Response
Size set in the request header. Since the resulting Query response is too big,
an error is returned. Increase the Maximum Response Size, resubmit the Query
request, and get a successful response.
The specific list of operations and object types returned in
the response MAY vary.
See test-cases/kmip-v2.1/mandatory/MSGENC-HTTPS-M-1-21.xml.
The informative corresponding wire encoding for the test
case is:
|
Request Time 0
00000000: 50 4f 53 54 20
2f 6b 6d-69 70 20 48 54 54 50 2f POST /kmip HTTP/
00000010: 31 2e 30 0d 0a
50 72 61-67 6d 61 3a 20 6e 6f 2d 1.0..Pragma: no-
00000020: 63 61 63 68 65
0d 0a 43-61 63 68 65 2d 43 6f 6e cache..Cache-Con
00000030: 74 72 6f 6c 3a
20 6e 6f-2d 63 61 63 68 65 0d 0a trol: no-cache..
00000040: 43 6f 6e 6e 65
63 74 69-6f 6e 3a 20 6b 65 65 70 Connection: keep
00000050: 2d 61 6c 69 76
65 0d 0a-43 6f 6e 74 65 6e 74 2d -alive..Content-
00000060: 54 79 70 65 3a
20 61 70-70 6c 69 63 61 74 69 6f Type: applicatio
00000070: 6e 2f 6f 63 74
65 74 2d-73 74 72 65 61 6d 0d 0a n/octet-stream..
00000080: 43 6f 6e 74 65
6e 74 2d-4c 65 6e 67 74 68 3a 20 Content-Length:
00000090: 31 35 32 20 20
20 20 20-20 20 0d 0a 0d 0a 42 00 152 ....B.
000000a0: 15 32 78 01 00
00 00 90-42 00 77 01 00 00 00 48 .2x.....B.w....H
000000b0: 42 00 69 01 00
00 00 20-42 00 6a 02 00 00 00 04 B.i.... B.j.....
000000c0: 00 00 00 01 00
00 00 00-42 00 6b 02 00 00 00 04 ........B.k.....
000000d0: 00 00 00 03 00
00 00 00-42 00 50 02 00 00 00 04 ........B.P.....
000000e0: 00 00 01 00 00
00 00 00-42 00 0d 02 00 00 00 04 ........B.......
000000f0: 00 00 00 01 00
00 00 00-42 00 0f 01 00 00 00 38 ........B......8
00000100: 42 00 5c 05 00
00 00 04-00 00 00 18 00 00 00 00 B.\.............
00000110: 42 00 79 01 00
00 00 20-42 00 74 05 00 00 00 04 B.y.... B.t.....
00000120: 00 00 00 01 00
00 00 00-42 00 74 05 00 00 00 04 ........B.t.....
00000130: 00 00 00 02 00
00 00 00- ........
|
|
Response Time 0
00000000: 48
54 54 50 2f 31 2e 31-20 32 30 30 20 4f 4b 0d HTTP/1.1 200 OK.
00000010: 0a
43 6f 6e 74 65 6e 74-2d 54 79 70 65 3a 20 61 .Content-Type: a
00000020: 70
70 6c 69 63 61 74 69-6f 6e 2f 6f 63 74 65 74 pplication/octet
00000030: 2d
73 74 72 65 61 6d 0d-0a 43 6f 6e 74 65 6e 74 -stream..Content
00000040: 2d
4c 65 6e 67 74 68 3a-20 31 36 38 0d 0a 0d 0a -Length: 168....
00000050: 42
00 7b 01 00 00 00 a0-42 00 7a 01 00 00 00 48 B.{.... B.z....H
00000060: 42
00 69 01 00 00 00 20-42 00 6a 02 00 00 00 04 B.i.... B.j.....
00000070: 00
00 00 01 00 00 00 00-42 00 6b 02 00 00 00 04 ........B.k.....
00000080: 00
00 00 03 00 00 00 00-42 00 92 09 00 00 00 08 ........B.......
00000090: 00
00 00 00 56 8a 5b e2-42 00 0d 02 00 00 00 04 ....V.[bB.......
000000a0: 00
00 00 01 00 00 00 00-42 00 0f 01 00 00 00 48 ........B......H
000000b0: 42
00 5c 05 00 00 00 04-00 00 00 18 00 00 00 00 B.\.............
000000c0: 42
00 7f 05 00 00 00 04-00 00 00 01 00 00 00 00 B...............
000000d0: 42
00 7e 05 00 00 00 04-00 00 00 02 00 00 00 00 B.~.............
000000e0: 42
00 7d 07 00 00 00 09-54 4f 4f 5f 4c 41 52 47 B.}.....TOO_LARG
000000f0: 45
00 00 00 00 00 00 00- E.......
|
|
Request Time 1
00000000: 50 4f 53 54 20
2f 6b 6d-69 70 20 48 54 54 50 2f POST /kmip HTTP/
00000010: 31 2e 30 0d 0a
50 72 61-67 6d 61 3a 20 6e 6f 2d 1.0..Pragma: no-
00000020: 63 61 63 68 65
0d 0a 43-61 63 68 65 2d 43 6f 6e cache..Cache-Con
00000030: 74 72 6f 6c 3a
20 6e 6f-2d 63 61 63 68 65 0d 0a trol: no-cache..
00000040: 43 6f 6e 6e 65 63
74 69-6f 6e 3a 20 6b 65 65 70 Connection: keep
00000050: 2d 61 6c 69 76
65 0d 0a-43 6f 6e 74 65 6e 74 2d -alive..Content-
00000060: 54 79 70 65 3a
20 61 70-70 6c 69 63 61 74 69 6f Type: applicatio
00000070: 6e 2f 6f 63 74
65 74 2d-73 74 72 65 61 6d 0d 0a n/octet-stream..
00000080: 43 6f 6e 74 65
6e 74 2d-4c 65 6e 67 74 68 3a 20 Content-Length:
00000090: 31 35 32 20 20
20 20 20-20 20 0d 0a 0d 0a 42 00 152 ....B.
000000a0: 15 32 78 01 00
00 00 90-42 00 77 01 00 00 00 48 .2x.....B.w....H
000000b0: 42 00 69 01 00
00 00 20-42 00 6a 02 00 00 00 04 B.i.... B.j.....
000000c0: 00 00 00 01 00
00 00 00-42 00 6b 02 00 00 00 04 ........B.k.....
000000d0: 00 00 00 03 00
00 00 00-42 00 50 02 00 00 00 04 ........B.P.....
000000e0: 00 00 08 00 00
00 00 00-42 00 0d 02 00 00 00 04 ........B.......
000000f0: 00 00 00 01 00
00 00 00-42 00 0f 01 00 00 00 38 ........B......8
00000100: 42 00 5c 05 00
00 00 04-00 00 00 18 00 00 00 00 B.\.............
00000110: 42 00 79 01 00
00 00 20-42 00 74 05 00 00 00 04 B.y.... B.t.....
00000120: 00 00 00 01 00
00 00 00-42 00 74 05 00 00 00 04 ........B.t.....
00000130: 00 00 00 02 00
00 00 00- ........
|
|
Response Time 1
00000000: 48
54 54 50 2f 31 2e 31-20 32 30 30 20 4f 4b 0d HTTP/1.1 200 OK.
00000010: 0a
43 6f 6e 74 65 6e 74-2d 54 79 70 65 3a 20 61 .Content-Type: a
00000020: 70
70 6c 69 63 61 74 69-6f 6e 2f 6f 63 74 65 74 pplication/octet
00000030: 2d
73 74 72 65 61 6d 0d-0a 43 6f 6e 74 65 6e 74 -stream..Content
00000040: 2d
4c 65 6e 67 74 68 3a-20 39 30 34 0d 0a 0d 0a -Length: 904....
00000050: 42
00 7b 01 00 00 03 80-42 00 7a 01 00 00 00 48 B.{.....B.z....H
00000060: 42
00 69 01 00 00 00 20-42 00 6a 02 00 00 00 04 B.i.... B.j.....
00000070: 00
00 00 01 00 00 00 00-42 00 6b 02 00 00 00 04 ........B.k.....
00000080: 00
00 00 03 00 00 00 00-42 00 92 09 00 00 00 08 ........B.......
00000090: 00
00 00 00 56 8a 5b e2-42 00 0d 02 00 00 00 04 ....V.[bB.......
000000a0: 00 00
00 01 00 00 00 00-42 00 0f 01 00 00 03 28 ........B......(
000000b0: 42
00 5c 05 00 00 00 04-00 00 00 18 00 00 00 00 B.\.............
000000c0: 42
00 7f 05 00 00 00 04-00 00 00 00 00 00 00 00 B...............
000000d0: 42
00 7c 01 00 00 03 00-42 00 5c 05 00 00 00 04 B.|.....B.\.....
000000e0: 00
00 00 18 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
000000f0: 00
00 00 08 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
00000100: 00
00 00 14 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
00000110: 00
00 00 0a 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
00000120: 00
00 00 01 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
00000130: 00
00 00 03 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
00000140: 00
00 00 0b 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
00000150: 00
00 00 0c 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
00000160: 00
00 00 0d 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
00000170: 00
00 00 0e 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
00000180: 00
00 00 0f 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
00000190: 00
00 00 12 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
000001a0: 00
00 00 13 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
000001b0: 00
00 00 1a 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
000001c0: 00
00 00 19 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
000001d0: 00
00 00 09 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
000001e0: 00
00 00 11 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
000001f0: 00
00 00 02 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
00000200: 00
00 00 04 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
00000210: 00
00 00 15 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
00000220: 00
00 00 16 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
00000230: 00
00 00 10 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
00000240: 00
00 00 1d 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
00000250: 00
00 00 06 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
00000260: 00
00 00 07 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
00000270: 00
00 00 1e 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
00000280: 00
00 00 1b 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
00000290: 00
00 00 1c 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
000002a0: 00
00 00 25 00 00 00 00-42 00 5c 05 00 00 00 04 ...%....B.\.....
000002b0: 00
00 00 26 00 00 00 00-42 00 5c 05 00 00 00 04 ...&....B.\.....
000002c0: 00
00 00 1f 00 00 00 00-42 00 5c 05 00 00 00 04 ........B.\.....
000002d0: 00
00 00 20 00 00 00 00-42 00 5c 05 00 00 00 04 ... ....B.\.....
000002e0: 00
00 00 21 00 00 00 00-42 00 5c 05 00 00 00 04 ...!....B.\.....
000002f0: 00
00 00 22 00 00 00 00-42 00 5c 05 00 00 00 04 ..."....B.\.....
00000300: 00
00 00 23 00 00 00 00-42 00 5c 05 00 00 00 04 ...#....B.\.....
00000310: 00
00 00 24 00 00 00 00-42 00 5c 05 00 00 00 04 ...$....B.\.....
00000320: 00
00 00 27 00 00 00 00-42 00 5c 05 00 00 00 04 ...'....B.\.....
00000330: 00
00 00 28 00 00 00 00-42 00 5c 05 00 00 00 04 ...(....B.\.....
00000340: 00
00 00 29 00 00 00 00-42 00 57 05 00 00 00 04 ...)....B.W.....
00000350: 00
00 00 01 00 00 00 00-42 00 57 05 00 00 00 04 ........B.W.....
00000360: 00
00 00 02 00 00 00 00-42 00 57 05 00 00 00 04 ........B.W.....
00000370: 00
00 00 07 00 00 00 00-42 00 57 05 00 00 00 04 ........B.W.....
00000380: 00
00 00 03 00 00 00 00-42 00 57 05 00 00 00 04 ........B.W.....
00000390: 00
00 00 04 00 00 00 00-42 00 57 05 00 00 00 04 ........B.W.....
000003a0: 00
00 00 06 00 00 00 00-42 00 57 05 00 00 00 04 ........B.W.....
000003b0: 00
00 00 08 00 00 00 00-42 00 57 05 00 00 00 04 ........B.W.....
000003c0: 00
00 00 05 00 00 00 00-42 00 57 05 00 00 00 04 ........B.W.....
000003d0: 00
00 00 09 00 00 00 00- ........
|
5.4 XML Profiles
The XML profile specifies the use of KMIP replacing the TTLV
message encoding with an XML message encoding. The results returned using the
XML encoding SHALL be logically the same as if the message encoding was in TTLV
form. All size or length values specified within tag values for KMIP items
SHALL be the same in XML form as if the message encoding were in TTLV form. The
implications of this are that items such as MaximumResponseSize are interpreted
to refer to a maximum length computed as if it were a TTLV-encoded response,
not the length of the XML-encoded response.
KMIP text values of Tags, Types
and Enumerations SHALL be normalized to create a ‘CamelCase’ format that would
be suitable to be used as a variable name in C/Java or an XML element name.
The basic approach to converting
from KMIP text to CamelCase is to separate the text into individual word tokens
(rules 1-4), capitalize the first letter of each word (rule 5) and then join
with spaces removed (rule 6). The tokenizing splits on whitespace and on
dashes where the token following is a valid word. The tokenizing also removes
round brackets and shifts decimals from the front to the back of the first word
in each string. The following rules SHALL be applied to create the normalized
CamelCase form:
- Replace round brackets ‘(‘, ‘)’ with spaces
- If a non-word char (not alpha, digit or underscore)
is followed by a letter (either upper or lower case) then a lower-case
letter, replace the non-word char with space
- Replace remaining non-word chars (except
whitespace) with underscore.
- If the first word begins with a digit, move all
digits at start of first word to end of first word
- Capitalize the first letter of each word
- Concatenate all words with spaces
removed
Hex representations of numbers
must always begin with ‘0x’ and must not include any spaces. They may use
either upper or lower case ‘a’-’f’. The hex representation must include all
leading zeros or sign extension bits when representing a value of a fixed width
such as Tags (3 bytes), Integer (32-bit signed big-endian), Long Integer
(64-bit signed big-endian) and Big Integer (big-endian multiple of 8 bytes).
The Integer values for -1, 0, 1 are represented as "0xffffffff", "0x00000000", "0x00000001". Hex representation for Byte Strings are similar to
numbers, but do not include the ‘0x’ prefix, and can be of any length.
Tags are a String that may contain
either:
- The 3-byte tag hex value prefixed
with ‘0x’
- The normalised text of a Tag as
specified in the KMIP Specification
Other text values may be used such
as published names of Extension tags, or names of new tags added in future KMIP
versions. Producers may however choose to use hex values for these tags to
ensure they are understood by all consumers.
Type must be a String containing a
CamelCase representation of one of the normalized values as defined in the KMIP
specification.
- Structure
- Integer
- LongInteger
- BigInteger
- Enumeration
- Boolean
- TextString
- ByteString
- DateTime
- Interval
- DateTimeExtended
If type is not included, the
default type of Structure SHALL be used.
The specification of a value is
represented differently for each TTLV type.
For XML, each TTLV is represented
as an XML element with attributes. The general form uses a single element
named ‘TTLV’ with ‘tag’, optional ‘name’ and ‘type’ attributes. This form
allows any TTLV including extensions to be encoded. For tags defined in the
KMIP Specification or other well-known extensions, a more specific form can be
used where each tag is encoded as an element with the same name and includes a
‘type’ attribute. For either form, structure values are encoded as nested xml
elements, and non-structure values are encoded using the ‘value’ attribute.
<TTLV tag="0x420001" name="ActivationDate" type="DateTime"
value="2001-01-01T10:00:00+10:00"/>
<TTLV tag="0x420001" type="DateTime" value="2001-01-01T10:00:00+10:00"/>
<ActivationDate type="DateTime" value="2001-01-01T10:00:00+10:00"/>
<TTLV tag="0x54FFFF" name="SomeExtension" type="DateTime"
value="2001-01-01T10:00:00+10:00"/>
The ‘type’ property / attribute SHALL
have a default value of ‘Structure’ and may be omitted for Structures.
If namespaces are required, XML
elements SHALL use the following namespace:
urn:oasis:tc:kmip:xmlns
Tags are a String that may contain
either:
- The 3-byte tag hex value prefixed
with ‘0x’
- The normalised text of a Tag as
specified in the KMIP Specification
Other text values may be used such
as published names of Extension tags, or names of new tags added in future KMIP
versions. Producers may however choose to use hex values for these tags to
ensure they are understood by all consumers.
<ActivationDate
xmlns="urn:oasis:tc:kmip:xmlns"
type="DateTime"
value="2001-01-01T10:00:00+10:00"/>
<IVCounterNonce
type="ByteString"
value="a1b2c3d4"/>
<PrivateKeyTemplateAttribute
type="Structure"/>
<TTLV
tag="0x545352"
name="SomeExtension"
type="TextString"
value="This
is an extension"/>
<WELL_KNOWN_EXTENSION
type="TextString"
value="This
is an extension"/>
For XML, sub-items are nested
elements.
<ProtocolVersion
type="Structure">
<ProtocolVersionMajor type="Integer" value="1"/>
<ProtocolVersionMinor type="Integer" value="0"/>
</ProtocolVersion>
<ProtocolVersion>
<ProtocolVersionMajor type="Integer" value="1"/>
<ProtocolVersionMinor type="Integer" value="0"/>
</ProtocolVersion>
The ‘type’ property / attribute is
optional for a Structure.
For XML, value is a decimal and
uses [XML-SCHEMA] type xsd:int
<BatchCount type="Integer" value="10"/>
(Cryptographic Usage Mask, Storage
Status Mask):
Integer mask values can also be
encoded as a String containing mask components. XML uses an attribute with [XML-SCHEMA]
type xsd:list which uses a space separator. Components may be either the text
of the enumeration value as defined in KMIP
9.1.3.3.1/KMIP 12.1 or as a 32-bit unsigned big-endian hex string.
<CryptographicUsageMask
type="Integer"
value="0x0000100c"/>
<CryptographicUsageMask
type="Integer"
value="Encrypt
Decrypt CertificateSign"/>
<CryptographicUsageMask
type="Integer"
value="CertificateSign
0x00000004 0x0000008"/>
<CryptographicUsageMask
type="Integer"
value="CertificateSign
0x0000000c"/>
For XML, value uses [XML-SCHEMA] type
xsd:long
<x540001
type="LongInteger"
value="-2"/>
<UsageLimitsCount
type="LongInteger"
value="1152921504606846976"/>
For XML, value uses [XML-SCHEMA] type
xsd:hexBinary
<X
type="BigInteger"
value="0000000000000000"/>
For XML, value uses [XML-SCHEMA] type
xsd:string and is either a hex string or the CamelCase enum text. If an XSD
with xsd:enumeration restriction is used to define valid values (as is the case
with the XSD included as an appendix), parsers should also accept any hex
string in addition to defined enum values.
<ObjectType
type="Enumeration"
value="0x00000002"/>
<ObjectType
type="Enumeration"
value="SymmetricKey"/>
For XML, value uses [XML-SCHEMA] type
xsd:Boolean
<BatchOrderOption type=”Boolean"
value="true"/>
XML uses [XML-SCHEMA] type
xsd:string
<AttributeName type="TextString" value="Cryptographic
Algorithm"/>
XML uses [XML-SCHEMA] type
xsd:hexBinary
<MACSignature type="ByteString" value="C50F77"/>
For XML, value uses [XML-SCHEMA] type
xsd:dateTime
<ArchiveDate type="DateTime" value="2001-01-01T10:00:00+10:00"/>
The value SHALL always be “time
zoned” – i.e. a time zone specifier SHALL always be included.
XML uses [XML-SCHEMA] type
xsd:unsignedInt
<Offset type="Interval" value="27"/>
For XML, value uses [XML-SCHEMA] type
xsd:long
<x540001
type="DateTimeExtended"
value="2"/>
<X540001
type="DateTimeExtended"
value="1152921504606846976"/>
KMIP clients conformant to this profile:
- SHALL conform to the Baseline Client (section 5.1.1)
- SHALL conform with XML Encoding (5.4.1)
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.5.2
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
KMIP servers conformant to this profile:
- SHALL conform to the Baseline Server (section 5.1.2)
- SHALL conform with XML Encoding (5.4.1)
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.5.3
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
Perform a Query operation, querying the Operations and
Objects supported by the server, with a restriction on the Maximum Response
Size set in the request header. Since the resulting Query response is too big,
an error is returned. Increase the Maximum Response Size, resubmit the Query
request, and get a successful response.
The specific list of operations and object types returned in
the response MAY vary.
See test-cases/kmip-v2.1/mandatory/MSGENC-XML-M-1-21.xml.
The JSON profile specifies the use of KMIP replacing the
TTLV message encoding with a JSON message encoding. The results returned using
the JSON encoding SHALL be logically the same as if the message encoding was in
TTLV form. All size or length values specified within tag values for KMIP items
SHALL be the same in JSON form as if the message encoding were in TTLV form. The
implications of this are that items such as MaximumResponseSize are interpreted
to refer to a maximum length computed as if it were a TTLV-encoded response,
not the length of the JSON-encoded response.
KMIP text values of Tags, Types
and Enumerations SHALL be normalized to create a ‘CamelCase’ format that would
be suitable to be used as a variable name in C/Java or an JSON name.
The basic approach to converting
from KMIP text to CamelCase is to separate the text into individual word tokens
(rules 1-4), capitalize the first letter of each word (rule 5) and then join
with spaces removed (rule 6). The tokenizing splits on whitespace and on
dashes where the token following is a valid word. The tokenizing also removes
round brackets and shifts decimals from the front to the back of the first word
in each string. The following rules SHALL be applied to create the normalized
CamelCase form:
- Replace round brackets ‘(‘, ‘)’ with spaces
- If a non-word char (not alpha, digit or underscore)
is followed by a letter (either upper or lower case) then a lower-case
letter, replace the non-word char with space
- Replace remaining non-word chars (except
whitespace) with underscore.
- If the first word begins with a digit, move all
digits at start of first word to end of first word
- Capitalize the first letter of each word
- Concatenate all words with spaces
removed
Hex representations of numbers
must always begin with ‘0x’ and must not include any spaces. They may use
either upper or lower case ‘a’-’f’. The hex representation must include all
leading zeros or sign extension bits when representing a value of a fixed width
such as Tags (3 bytes), Integer (32-bit signed big-endian), Long Integer
(64-bit signed big-endian) and Big Integer (big-endian multiple of 8 bytes).
The Integer values for -1, 0, 1 are represented as "0xffffffff", "0x00000000", "0x00000001". Hex representation for Byte Strings are similar to
numbers, but do not include the ‘0x’ prefix, and can be of any length.
Tags are a String that may contain
either:
- The 3-byte tag hex value prefixed
with ‘0x’
- The normalised text of a Tag as
specified in the KMIP Specification
Other text values may be used such
as published names of Extension tags, or names of new tags added in future KMIP
versions. Producers may however choose to use hex values for these tags to
ensure they are understood by all consumers.
Type must be a String containing a
CamelCase representation of one of the normalized values as defined in the KMIP
specification.
- Structure
- Integer
- LongInteger
- BigInteger
- Enumeration
- Boolean
- TextString
- ByteString
- DateTime
- Interval
- DateTimeExtended
If type is not included, the
default type of Structure SHALL be used.
The specification of a value is
represented differently for each TTLV type.
For JSON encoding, each TTLV is
represented as a JSON Object with properties ‘tag’, optional ‘name’, ‘type’ and
‘value’.
{"tag": "ActivationDate",
"type":"DateTime",
"value":"2001-01-01T10:00:00+10:00"}
{"tag": "0x54FFFF",
"name":"SomeExtension",
"type":"Integer",
"value":"0x00000001"}
The ‘type’ property / attribute SHALL
have a default value of ‘Structure’ and may be omitted for Structures.
Tags are a String that may contain
either:
- The 3-byte tag hex value prefixed
with ‘0x’
- The normalised text of a Tag as
specified in the KMIP Specification
Other text values may be used such
as published names of Extension tags, or names of new tags added in future KMIP
versions. Producers may however choose to use hex values for these tags to
ensure they are understood by all consumers.
{"tag": "0x420001",
"type":"DateTime",
"value":"2001-01-01T10:00:00+10:00"}
{"tag": "ActivationDate",
"type":"DateTime",
"value":"2001-01-01T10:00:00+10:00"}
{"tag": "IVCounterNonce",
"type":"ByteString",
"value":"a1b2c3d4"}
{"tag": "PrivateKeyTemplateAttribute",
"type":"Structure",
"value":[]}
{"tag": "0x545352",
"type":"TextString",
"value":"This
is an extension"}
{"tag": "WELL_KNOWN_EXTENSION",
"type":"TextString",
"value":"This
is an extension"}
For JSON, value is an Array
containing sub-items, or may be null.
{"tag":
"ProtocolVersion", "type":"Structure",
"value":[
{"tag": "ProtocolVersionMajor",
"type":"Integer",
"value":1},
{"tag": "ProtocolVersionMajor",
"type":"Integer",
"value":0}
]}
{"tag":
"ProtocolVersion", "value":[
{"tag": "ProtocolVersionMajor",
"type":"Integer",
"value":1},
{"tag":
"ProtocolVersionMajor", "type":"Integer",
"value":0}
]}
The ‘type’ property / attribute is
optional for a Structure.
For JSON, value is either a Number
or a hex string.
{"tag": "BatchCount", "type":"Integer", "value":10}
{"tag":
"BatchCount", "type":"Integer",
"value":"0x0000000A"}
(Cryptographic Usage Mask, Storage
Status Mask):
Integer mask values can also be
encoded as a String containing mask components. JSON uses ‘|’ as the
separator. Components may be either the text of the enumeration value as
defined in the KMIP Specification or a 32-bit unsigned big-endian hex string.
{"tag": "CryptographicUsageMask", "type":"Integer",
"value": "0x0000100c"}
{"tag":
"CryptographicUsageMask", "type":"Integer",
"value": "Encrypt|Decrypt|CertificateSign"}
{"tag":
"CryptographicUsageMask", "type":"Integer",
"value": "CertificateSign|0x00000004|0x0000008"}
{"tag": "CryptographicUsageMask", "type":"Integer",
"value": "CertificateSign|0x0000000c"}
For JSON, value is either a Number
or a hex string. Note that JS Numbers are 64-bit floating point and can only
represent 53-bits of precision, so any values >= 2^52 must be represented as
hex strings.
{"tag": "0x540001", "type":"LongInteger", "value":"0xfffffffffffffffe"}
{"tag":
"0x540001", "type":"LongInteger",
"value":-2}
{"tag":
"UsageLimitsCount", "type":"LongInteger",
"value":"0x1000000000000000"}
Note that this value (2^60) is too
large to be represented as a Number in JSON.
For JSON, value is either a Number
or a hex string. Note that Big Integers must be sign extended to contain a
multiple of 8 bytes, and as per LongInteger, JS numbers only support a limited
range of values.
{"tag": "X", "type":"BigInteger", "value":0}
{"tag":
"X", "type":"BigInteger", "value":"0x0000000000000000"}
For JSON, value may contain:
- Number representing the
enumeration 32-bit unsigned big-endian value
- Hex string representation of
32-bit unsigned big-endian value
- CamelCase of the enum text as
defined in KMIP 9.1.3.2.x
{"tag": "0x420057", "type":"Enumeration", "value":2}
{"tag":
"ObjectType", "type":"Enumeration",
"value":"0x00000002"}
{"tag":
"ObjectType", "type":"Enumeration",
"value":"SymmetricKey"}
For JSON, value must be either a
hex string, or a JSON Boolean ‘true’ or ‘false’.
{"tag": "BatchOrderOption", "type":"Boolean",
"value":true}
{"tag":
"BatchOrderOption", "type":"Boolean",
"value":"0x0000000000000001"}
For JSON, value must be a String
{"tag": "AttributeName", "type":"TextString",
"value":"Cryptographic
Algorithm"}
For JSON, value must be a hex
string. Note Byte Strings do not include the ‘0x’ prefix, and do not have any
leading bytes.
{"tag": "MACSignature", "type":"ByteString", "value":"C50F77"}
For JSON, value must be either a
hex string, or an ISO8601 DateTime as used in XSD using format:
'-'? yyyy '-' mm '-' dd 'T' hh ':' mm ':' ss ('.' s+)? ((('+' |
'-') hh ':' mm) | 'Z')?
Fractional seconds are not used in
KMIP and should not generally be shown. If they are used, they should be
ignored (truncated).
{"tag": "ArchiveDate", "type":"DateTime", "value":"0x000000003a505520"}
{"tag":
"ArchiveDate", "type":"DateTime",
"value":"2001-01-01T10:00:00+10:00"}
The value SHALL always be “time
zoned” – i.e. a time zone specifier SHALL always be included.
For JSON, value is either a Number
or a hex string. Note that intervals are 32-bit unsigned big-endian values.
{"tag": "Offset", "type":"Interval", "value":27}
{"tag":
"Offset", "type":"Interval", "value":"0x0000001b"}
For JSON, value is either a Number
or a hex string. Note that JS Numbers are 64-bit floating point and can only
represent 53-bits of precision, so any values >= 252 must be
represented as hex strings.
{"tag": "0x540001", "type":"DateTimeExtended", "value":"0xfffffffffffffffe"}
{"tag":
"0x540001", "type":"DateTimeExtended",
"value":2}
Note that this value (260)
is too large to be represented as a Number in JSON.
KMIP clients conformant to this profile:
- SHALL conform to the Baseline Client (section 5.1.1)
- SHALL conform with JSON Encoding (5.5.1)
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.5.2
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
KMIP servers conformant to this profile:
- SHALL conform to the Baseline Server (section 5.1.2)
- SHALL conform with JSON Encoding (5.5.1)
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.5.3
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
Perform a Query operation, querying the Operations and
Objects supported by the server, with a restriction on the Maximum Response
Size set in the request header. Since the resulting Query response is too big,
an error is returned. Increase the Maximum Response Size, resubmit the Query
request, and get a successful response.
The specific list of operations and object types returned in
the response MAY vary.
See test-cases/kmip-v2.1/mandatory/MSGENC-JSON-M-1-21.xml.
The normative corresponding wire encoding in JSON for the
test case is:
|
Request Time 0
{"tag":"RequestMessage",
"value":[
{"tag":"RequestHeader", "value":[
{"tag":"ProtocolVersion", "value":[
{"tag":"ProtocolVersionMajor",
"type":"Integer",
"value":"0x00000001"},
{"tag":"ProtocolVersionMinor",
"type":"Integer", "value":"0x00000004"}
]},
{"tag":"MaximumResponseSize",
"type":"Integer", "value":"0x00000100"},
{"tag":"BatchCount",
"type":"Integer",
"value":"0x00000001"}
]},
{"tag":"BatchItem", "value":[
{"tag":"Operation",
"type":"Enumeration",
"value":"Query"},
{"tag":"RequestPayload", "value":[
{"tag":"QueryFunction",
"type":"Enumeration",
"value":"QueryOperations"},
{"tag":"QueryFunction",
"type":"Enumeration",
"value":"QueryObjects"}
]}
]}
]}
|
|
Response Time 0
{"tag":"ResponseMessage",
"value":[
{"tag":"ResponseHeader", "value":[
{"tag":"ProtocolVersion", "value":[
{"tag":"ProtocolVersionMajor",
"type":"Integer",
"value":"0x00000001"},
{"tag":"ProtocolVersionMinor",
"type":"Integer", "value":"0x00000004"}
]},
{"tag":"TimeStamp",
"type":"DateTime", "value":"2016-01-04T11:47:46+00:00"},
{"tag":"BatchCount",
"type":"Integer",
"value":"0x00000001"}
]},
{"tag":"BatchItem", "value":[
{"tag":"Operation",
"type":"Enumeration",
"value":"Query"},
{"tag":"ResultStatus",
"type":"Enumeration", "value":"OperationFailed"},
{"tag":"ResultReason",
"type":"Enumeration",
"value":"ResponseTooLarge"},
{"tag":"ResultMessage",
"type":"TextString",
"value":"TOO_LARGE"}
]}
]}
|
|
Request Time 1
{"tag":"RequestMessage",
"value":[
{"tag":"RequestHeader",
"value":[
{"tag":"ProtocolVersion", "value":[
{"tag":"ProtocolVersionMajor",
"type":"Integer",
"value":"0x00000001"},
{"tag":"ProtocolVersionMinor",
"type":"Integer", "value":"0x00000004"}
]},
{"tag":"MaximumResponseSize",
"type":"Integer",
"value":"0x00000800"},
{"tag":"BatchCount",
"type":"Integer",
"value":"0x00000001"}
]},
{"tag":"BatchItem", "value":[
{"tag":"Operation",
"type":"Enumeration",
"value":"Query"},
{"tag":"RequestPayload", "value":[
{"tag":"QueryFunction",
"type":"Enumeration",
"value":"QueryOperations"},
{"tag":"QueryFunction",
"type":"Enumeration",
"value":"QueryObjects"}
]}
]}
]}
|
|
Response Time 1
{"tag":"ResponseMessage",
"value":[
{"tag":"ResponseHeader", "value":[
{"tag":"ProtocolVersion", "value":[
{"tag":"ProtocolVersionMajor",
"type":"Integer",
"value":"0x00000001"},
{"tag":"ProtocolVersionMinor",
"type":"Integer", "value":"0x00000004"}
]},
{"tag":"TimeStamp", "type":"DateTime",
"value":"2016-01-04T11:47:46+00:00"},
{"tag":"BatchCount",
"type":"Integer",
"value":"0x00000001"}
]},
{"tag":"BatchItem", "value":[
{"tag":"Operation",
"type":"Enumeration",
"value":"Query"},
{"tag":"ResultStatus", "type":"Enumeration",
"value":"Success"},
{"tag":"ResponsePayload", "value":[
{"tag":"Operation",
"type":"Enumeration",
"value":"Query"},
{"tag":"Operation",
"type":"Enumeration",
"value":"Locate"},
{"tag":"Operation", "type":"Enumeration",
"value":"Destroy"},
{"tag":"Operation",
"type":"Enumeration", "value":"Get"},
{"tag":"Operation",
"type":"Enumeration",
"value":"Create"},
{"tag":"Operation",
"type":"Enumeration",
"value":"Register"},
{"tag":"Operation",
"type":"Enumeration",
"value":"GetAttributes"},
{"tag":"Operation",
"type":"Enumeration",
"value":"GetAttributeList"},
{"tag":"Operation",
"type":"Enumeration",
"value":"AddAttribute"},
{"tag":"Operation",
"type":"Enumeration",
"value":"ModifyAttribute"},
{"tag":"Operation",
"type":"Enumeration",
"value":"DeleteAttribute"},
{"tag":"Operation",
"type":"Enumeration",
"value":"Activate"},
{"tag":"Operation",
"type":"Enumeration",
"value":"Revoke"},
{"tag":"Operation",
"type":"Enumeration",
"value":"Poll"},
{"tag":"Operation",
"type":"Enumeration",
"value":"Cancel"},
{"tag":"Operation",
"type":"Enumeration",
"value":"Check"},
{"tag":"Operation",
"type":"Enumeration",
"value":"GetUsageAllocation"},
{"tag":"Operation",
"type":"Enumeration",
"value":"CreateKeyPair"},
{"tag":"Operation",
"type":"Enumeration",
"value":"ReKey"},
{"tag":"Operation",
"type":"Enumeration",
"value":"Archive"},
{"tag":"Operation", "type":"Enumeration",
"value":"Recover"},
{"tag":"Operation",
"type":"Enumeration",
"value":"ObtainLease"},
{"tag":"Operation",
"type":"Enumeration",
"value":"ReKeyKeyPair"},
{"tag":"Operation",
"type":"Enumeration",
"value":"Certify"},
{"tag":"Operation",
"type":"Enumeration",
"value":"ReCertify"},
{"tag":"Operation",
"type":"Enumeration",
"value":"DiscoverVersions"},
{"tag":"Operation",
"type":"Enumeration",
"value":"Notify"},
{"tag":"Operation",
"type":"Enumeration", "value":"Put"},
{"tag":"Operation",
"type":"Enumeration",
"value":"RNGRetrieve"},
{"tag":"Operation",
"type":"Enumeration",
"value":"RNGSeed"},
{"tag":"Operation",
"type":"Enumeration",
"value":"Encrypt"},
{"tag":"Operation", "type":"Enumeration",
"value":"Decrypt"},
{"tag":"Operation",
"type":"Enumeration",
"value":"Sign"},
{"tag":"Operation",
"type":"Enumeration",
"value":"SignatureVerify"},
{"tag":"Operation",
"type":"Enumeration", "value":"MAC"},
{"tag":"Operation",
"type":"Enumeration",
"value":"MACVerify"},
{"tag":"Operation",
"type":"Enumeration",
"value":"Hash"},
{"tag":"Operation",
"type":"Enumeration",
"value":"CreateSplitKey"},
{"tag":"Operation",
"type":"Enumeration", "value":"JoinSplitKey"},
{"tag":"ObjectType",
"type":"Enumeration",
"value":"Certificate"},
{"tag":"ObjectType",
"type":"Enumeration",
"value":"SymmetricKey"},
{"tag":"ObjectType",
"type":"Enumeration",
"value":"SecretData"},
{"tag":"ObjectType",
"type":"Enumeration",
"value":"PublicKey"},
{"tag":"ObjectType",
"type":"Enumeration",
"value":"PrivateKey"},
{"tag":"ObjectType",
"type":"Enumeration",
"value":"Template"},
{"tag":"ObjectType",
"type":"Enumeration", "value":"OpaqueObject"},
{"tag":"ObjectType",
"type":"Enumeration",
"value":"SplitKey"},
{"tag":"ObjectType",
"type":"Enumeration",
"value":"PGPKey"}
]}
]}
]}
|
5.6 Symmetric Key
Lifecycle Profiles
The Symmetric Key Lifecycle Profile is a KMIP server performing
symmetric key lifecycle operations based on requests received from a KMIP
client.
KMIP clients conformant to this profile:
- SHALL conform to the Baseline Client (section 5.1.1)
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.6.1
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
KMIP servers conformant to this profile:
- SHALL conform to the Baseline Server (section 5.1.2)
- SHALL support the following Objects [KMIP-SPEC]
- Symmetric Key
- SHALL support the following Object Attributes
[KMIP-SPEC]
a. Cryptographic
Algorithm
b. Object
Type
c. Process
Start Date
d. Protect
Stop Date
- SHALL support the following Client-to-Server Operations
[KMIP-SPEC:
a. Create
- SHALL support the following Enumerations
[KMIP-SPEC]:
a. Cryptographic
Algorithm with values:
i. 3DES
ii. AES
b. Object
Type with value:
i. Symmetric
Key
c. Key
Format Type with value:
i. Raw
ii. Transparent
Symmetric Key
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.6.2
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
See test-cases/kmip-v2.1/mandatory/SKLC-M-1-21.xml.
See test-cases/kmip-v2.1/mandatory/SKLC-M-2-21.xml.
See test-cases/kmip-v2.1/mandatory/SKLC-M-3-21.xml.
See test-cases/kmip-v2.1/optional/SKLC-O-1-21.xml.
The Symmetric Key Lifecycle Profile is a KMIP server
performing symmetric key lifecycle operations based on requests received from a
KMIP client. The use of algorithms within this profile set has been limited to
those permitted under the NIST FIPS 140 validation program.
KMIP clients conformant to this profile:
- SHALL conform to the Baseline Client (section 5.1.1)
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.7.1
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
KMIP clients conformant to this profile:
- SHALL conform to the Baseline Client (section 5.1.1)
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.7.2
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
KMIP clients conformant to this profile:
- SHALL conform to the Baseline Client (section 5.1.1)
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.7.3
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
KMIP servers conformant to this profile:
- SHALL conform to the Baseline Server (section 5.1.2)
- SHALL support the following Objects [KMIP-SPEC]
a. Symmetric
Key
- SHALL support the following Object Attributes
[KMIP-SPEC]
a. Cryptographic
Algorithm
b. Cryptographic
Length with values:
i.
168 (3DES)
ii.
128 (AES)
iii.
192 (AES)
iv.
256 (AES)
c. Object
Type
d. Process
Start Date
e. Protect
Stop Date
- SHALL support the following Client-to-Server Operations
[KMIP-SPEC:
a. Create
- SHALL support the following Enumerations
[KMIP-SPEC]:
a. Cryptographic
Algorithm with values:
i.
3DES
ii.
AES
b. Key
Format Type with value:
i.
Raw
ii.
Transparent Symmetric Key
c. Object
Type with value:
i.
Symmetric Key
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.7.4
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
See test-cases/kmip-v2.1/mandatory/SKFF-M-1-21.xml.
See test-cases/kmip-v2.1/mandatory/SKFF-M-2-21.xml.
See test-cases/kmip-v2.1/mandatory/SKFF-M-3-21.xml.
See test-cases/kmip-v2.1/mandatory/SKFF-M-4-21.xml.
See test-cases/kmip-v2.1/mandatory/SKFF-M-5-21.xml.
See test-cases/kmip-v2.1/mandatory/SKFF-M-6-21.xml.
See test-cases/kmip-v2.1/mandatory/SKFF-M-7-21.xml.
See test-cases/kmip-v2.1/mandatory/SKFF-M-8-21.xml.
See test-cases/kmip-v2.1/mandatory/SKFF-M-9-21.xml.
See test-cases/kmip-v2.1/mandatory/SKFF-M-10-21.xml.
See test-cases/kmip-v2.1/mandatory/SKFF-M-11-21.xml.
See test-cases/kmip-v2.1/mandatory/SKFF-M-12-21.xml
The Asymmetric Key Lifecycle Profile is a KMIP server
performing symmetric key lifecycle operations based on requests received from a
KMIP client.
KMIP clients conformant to this profile:
- SHALL conform to the Baseline Client (section 5.1.1)
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.8.1
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
KMIP servers conformant to this profile:
- SHALL conform to the Baseline Server (section 5.1.2)
- SHALL support the following Objects [KMIP-SPEC]
a. Public
Key
b. Private
Key
- SHALL support the following Object Attributes [KMIP-SPEC]
a. Cryptographic
Algorithm
b. Object
Type
c. Process
Start Date
d. Process
Stop Date
- SHALL support the following Enumerations [KMIP-SPEC]:
a. Cryptographic
Algorithm with values:
i. RSA
b. Key
Format Type with value:
i.
PKCS#1
ii.
PKCS#8
iii.
Transparent RSA Public Key
iv.
Transparent RSA Private Key
c. Object
Type with value:
i.
Public Key
ii.
Private Key
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.8.2
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
See test-cases/kmip-v2.1/mandatory/AKLC-M-1-21.xml.
See test-cases/kmip-v2.1/mandatory/AKLC-M-2-21.xml
See test-cases/kmip-v2.1/mandatory/AKLC-M-3-21.xml
See test-cases/kmip-v2.1/optional/AKLC-O-1-21.xml.
5.9 Cryptographic Profiles
The Basic Cryptographic Client and Server profiles specify
the use of KMIP to request encryption and decryption operations from a KMIP
server.
The Advanced Cryptographic Client and Server profiles specify
the use of KMIP to request encryption, decryption, signature, and verification
operations from a KMIP server.
The RNG Cryptographic Client and Server profiles specify the
use of KMIP to request random number generator operations from a KMIP server.
KMIP clients conformant to this profile:
- SHALL conform to the Baseline Client (section 5.1.1)
- SHALL support at least one of the Client-to-Server
Operations [KMIP-SPEC]:
- Decrypt
- Encrypt
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.9.1
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
KMIP clients conformant to this profile:
- SHALL conform to the Baseline Client (section 5.1.1)
- SHALL support at least one of the Client-to-Server
Operations [KMIP-SPEC]:
- Decrypt
- Encrypt
- Hash
- MAC
- MAC Verify
- RNG Retrieve
- RNG Seed
- Sign
- Signature Verify
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.9.2
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
KMIP clients conformant to this profile:
- SHALL conform to the Baseline Client (section 5.1.1)
- SHALL support at least one of the Client-to-Server
Operations [KMIP-SPEC]:
- RNG Retrieve
- RNG Seed
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.9.3
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
KMIP servers conformant to this profile:
- SHALL conform to the Baseline Server (section 5.1.2)
- SHALL support the following Client-to-Server Operations
[KMIP-SPEC]:
- Decrypt
- Encrypt
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.9.4
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
KMIP servers conformant to this profile:
- SHALL conform to the Baseline Server (section 5.1.2)
- SHALL support the following Client-to-Server Operations
[KMIP-SPEC]:
- Decrypt
- Encrypt
- Hash
- MAC
- MAC Verify
- RNG Retrieve
- RNG Seed
- Sign
- Signature Verify
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.9.5
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
KMIP servers conformant to this profile:
- SHALL conform to the Baseline Server (section 5.1.2)
- SHALL support the following Client-to-Server Operations
[KMIP-SPEC]:
- RNG Retrieve
- RNG Seed
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.9.6
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
See test-cases/kmip-v2.1/mandatory/CS-BC-M-1-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-BC-M-2-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-BC-M-3-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-BC-M-4-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-BC-M-5-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-BC-M-6-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-BC-M-7-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-BC-M-8-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-BC-M-9-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-BC-M-10-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-BC-M-11-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-BC-M-12-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-BC-M-21-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-BC-M-20-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-BC-M-GCM-1-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-BC-M-GCM-2-21.xml
See test-cases/kmip-v2.1/mandatory/CS-BC-M-GCM-3-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-BC-M-CHACHA20-1-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-BC-M-CHACHA20-2-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-BC-M-CHACHA20-3-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-BC-M-CHACHA20POLY1305-1-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-AC-M-1-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-AC-M-2-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-AC-M-3-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-AC-M-4-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-AC-M-5-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-AC-M-6-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-AC-M-7-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-AC-M-8-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-AC-M-OAEP-1-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-AC-M-OAEP-2-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-AC-M-OAEP-3-21.xml
See test-cases/kmip-v2.1/mandatory/CS-AC-M-OAEP-4-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-AC-M-OAEP-5-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-AC-M-OAEP-6-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-AC-M-OAEP-7-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-AC-M-OAEP-8-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-AC-M-OAEP-9-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-AC-M-OAEP-10-21.xml.
See test-cases/kmip-v2.1/mandatory/CS-RNG-M-1-21.xml.
See test-cases/kmip-v2.1/optional/CS-RNG-O-1-21.xml
See test-cases/kmip-v2.1/optional/CS-RNG-O-2-21.xml
See test-cases/kmip-v2.1/optional/CS-RNG-O-3-21.xml
See test-cases/kmip-v2.1/optional/CS-RNG-O-4-21.xml
The Opaque Managed Object Store Profile is a KMIP server
performing storage related operations on opaque objects based on requests
received from a KMIP client.
KMIP clients conformant to this profile:
- SHALL conform to the Baseline Client (section 5.1.1)
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.10.1
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
KMIP servers conformant to this profile:
- SHALL conform to the Baseline Server (section 5.1.2)
- SHALL support the following Objects [KMIP-SPEC]
a. Opaque
Object
- SHALL support the following Object Attributes
[KMIP-SPEC]
a. Object
Type
- SHALL support the following Client-to-Server Operations
[KMIP-SPEC]:
a. Register
- SHALL support the following Enumerations
[KMIP-SPEC]:
a. Opaque
Data Type
b. Object
Type with value:
i.
Opaque Object
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.10.2
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
See test-cases/kmip-v2.1/mandatory/OMOS-M-1-21.xml.
See test-cases/kmip-v2.1/optional/OMOS-O-1-21.xml.
The Storage Array with Self-Encrypting Drives Profile is a storage
array containing self-encrypting drives operating as a KMIP client interacting
with a KMIP server.
KMIP clients conformant to this profile:
- SHALL conform to the Baseline Client (section 5.1.1)
- SHOULD NOT use a Custom Attribute [KMIP-SPEC] that
duplicates information that is already in standard Attributes [KMIP-SPEC]
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.11.1
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
KMIP servers conformant to this profile:
- SHALL conform to the Baseline Server (section 5.1.2)
- SHALL support the following Objects [KMIP-SPEC]
- Secret Data
- SHALL support the following Attributes [KMIP-SPEC]
a. Vendor
Attribute
- SHALL support the following Client-to-Server Operations
[KMIP-SPEC]:
a. Register
- SHALL support the following Enumerations [KMIP-SPEC]::
a. Name
Type value:
i.
Uninterpreted Text String
b. Object
Type values:
i.
Secret Data
c. Secret
Data Type value:
i. Password
- SHALL support Vendor Attribute [KMIP-SPEC] with the
following data types and properties:
a. TextString
- SHALL support a minimum length of 128 characters for Vendor
Attributes [KMIP-SPEC] and Name [KMIP-SPEC] values where the
attribute type is of variable length.
- SHALL support a minimum of 20 Vendor Attributes [KMIP-SPEC]
per managed object
- SHALL support a minimum of 128 characters in Vendor
Attributes [KMIP-SPEC] names
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.11.2
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
Determine server configuration details including operations
supported (only the mandatory operations are listed in the response example),
objects supported (only the mandatory objects types are listed in the response
example), and optional server information.
See test-cases/kmip-v2.1/mandatory/SASED-M-1-21.xml.
The secret data for the authentication key is registered.
The server must allow the registration of managed objects for Object Groups
either by allowed arbitrary values for Object Groups or by pre-configuration of
specific Object Groups prior to the storage array registering the
authentication key. The authentication key may be a new authentication key or
a replacement authentication key.
See test-cases/kmip-v2.1/mandatory/SASED-M-2-21.xml.
Locate and retrieve the previously registered authentication
key and finally destroy the authentication key.
See test-cases/kmip-v2.1/mandatory/SASED-M-3-21.xml.
The Tape Library Profile specifies the behavior of a tape
library operating as a KMIP client interacting with a KMIP server.
|
Key Associated Data (KAD)
|
Part of the tape format. May be segmented into
authenticated and unauthenticated fields. KAD usage is detailed in the SCSI
SSC-3 standard from the T10 organization available as ANSI INCITS 335-2000.
|
|
Hexadecimal Numeric Characters
|
Case-sensitive, printable, single byte ASCII characters
representing the numbers 0 through 9 and uppercase alpha A through F.
(US-ASCII characters 30h-39h and 41h-46h). Each byte (single 8-bit numeric
value) is represented as two hexadecimal numeric characters with the
high-nibble represented by the first (left-most) hexadecimal numeric
character and the low-nibble represented by the second (right-most)
hexadecimal numeric character.
|
|
N(a)
|
The maximum number of bytes in the tape authenticated KAD
field.
For LTO4, N(a) is 12 bytes.
For LTO5, N(a) is 60 bytes.
For LTO6, N(a) is 60 bytes.
|
|
N(u)
|
The maximum number of bytes in the tape unauthenticated
KAD field.
For LTO4, N(u) is 32 bytes.
For LTO5, N(u) is 32 bytes.
For LTO6, N(u) is 32 bytes.
|
|
N(k)
|
The maximum number of bytes in the tape format KAD fields
– i.e. N(a) + N(u).
For LTO4, N(k) is 44 bytes.
For LTO5, N(k) is 92 bytes.
For LTO6, N(k) is 92 bytes.
|
This information applies to Tape Libraries that use the Application
Specific Information [KMIP-SPEC] attribute to store key identifiers. KMIP
clients are not required to use Application Specific Information [KMIP-SPEC]
however KMIP servers conforming to the Tape Library Profiles are required to
support KMIP clients that use Application Specific Information [KMIP-SPEC]
and KMIP clients that do not use Application Specific Information [KMIP-SPEC].
The Application Specific Information [KMIP-SPEC] MAY
be used to store data that is specific to the application (Tape Library) using
the object.
The following Application Namespaces SHOULD be used in the
Application Namespace field of the Application Specific Information
[KMIP-SPEC]:
·
LIBRARY-LTO, LIBRARY-LTO4, LIBRARY-LTO5, LIBRARY-LTO6,
LIBRARY-LTO7
Application Specific Information [KMIP-SPEC] supports
key identifiers being created either on the server or on the client (Tape
Library), but not both. This profile specifies use of key identifiers created
by the client.
The Application Specific Information [KMIP-SPEC]
method of key identification relies on the ability to uniquely identify a key
based only on its Application Data (preferably), or (alternatively) on some
combination of Application Data and Custom Attributes [KMIP-SPEC], which
the key creator guarantees to be unique within the Application Namespace.
Key identifiers stored in the KMIP server's Application
Specific Information [KMIP-SPEC] are in text format. Key identifiers
stored in the KMIP client's tape format KAD fields are numeric format. The
specific algorithm for converting between text and numeric formats is specified
below.
All information contained in the tape format’s KAD fields is
converted to a text format consisting of hexadecimal numeric character pairs as
follows:
- The unauthenticated KAD is converted to text format by
converting each byte value to exactly two Hexadecimal Numeric Characters;
- The authenticated KAD is converted to text format by
converting each byte value to exactly two Hexadecimal Numeric Characters
and;
- The converted authenticated KAD Hexadecimal Numeric
Characters are concatenated to the end of the converted unauthenticated
KAD Hexadecimal Numeric Characters.
If the implementation uses client-created key identifiers,
then the client generates a new identifier in text format that SHALL be unique
within the chosen namespace. The source material for generating the string is
dependent on client policy. The numeric representation of this identifier
SHALL be no larger than the N(k) bytes of the KAD for the tape media being
used.
For KMIP clients and servers conforming to this profile, Application
Specific Information [KMIP-SPEC] SHALL be created by the Tape Library KMIP
client based on the tape format's KAD fields as follows:
1.
Define an empty
output buffer sufficient to contain a string with a maximum length of 2*N(k)
bytes.
2.
Copy the tape
format’s unauthenticated KAD (if present) to the output buffer, converting each
byte value to exactly two Hexadecimal Numeric Characters. The first byte
(i.e., byte 0) of the output buffer is the first byte of unauthenticated KAD.
3.
Concatenate the tape
format’s authenticated KAD to the output buffer, converting each byte value to
exactly two Hexadecimal Numeric Characters.
Note: the contents of the unauthenticated KAD and
authenticated KAD fields may be less than the maximum permitted lengths; the
implementation provides the correct length values to use in the algorithm
rather than using fixed maximum length fields.
If Application Specific Information [KMIP-SPEC] is
supported, then it SHALL be used by the client for locating the object for the
purpose of encrypting and decrypting data on tape. The Application Specific
Information [KMIP-SPEC] value SHALL solely be used for this purpose.
The Tape Library client
SHALL assign a text (i.e., human-readable) representation of the media barcode
to the Alternative Name [KMIP-SPEC] of the object. This SHALL occur on
first use of the object for encryption, which normally is when the library
requests the server to create the object.
The relationship
between key identifiers in Application Specific Information [KMIP-SPEC]
and Alternative Name [KMIP-SPEC] is as follows:
a) The values for
both are provided by the client
b) The identifier
in Alternative Name [KMIP-SPEC] (i.e., the barcode) SHALL be used by the
server administrator for finding keys associated with specific tape media
(e.g., a server administrator may want to find the key(s) associated with a
missing tape cartridge, where the barcode of that tape cartridge is known).
c) The Alternative
Name [KMIP-SPEC] SHALL NOT be used by a client for locating the object to
encrypt or decrypt data, since the value (barcode) is not required to be unique
and therefore does not ensure retrieval of the correct key.
KMIP clients conformant to this profile:
- SHALL conform to the Baseline Client (section 5.1.1)
- SHOULD support Application Specific Information
[KMIP-SPEC] with Application Data provided by the client in
accordance with Tape Library Application Specific Information (5.12.2 )
- SHOULD NOT use a Vendor Attributes [KMIP-SPEC] that
duplicates information that is already in standard Attributes [KMIP-SPEC]
- MAY use x-Barcode as a Vendor Attribute [KMIP-SPEC]
of type Text String to store the barcode
- SHALL support the following Attributes [KMIP-SPEC]
- Alternative Name
- SHALL support the following Enumerations
[KMIP-SPEC]:
a. Alternative
Name Type with value:
i. Uninterpreted
Text String
- SHALL store the media barcode information in an Alternative
Name [KMIP-SPEC] Attribute [KMIP-SPEC] in accordance with Tape
Library Alternative Name (5.12.3)
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.12.4
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
KMIP servers conformant to this profile:
- SHALL conform to the Baseline Server (section 5.1.2)
- SHALL support the following Objects [KMIP-SPEC]
- Symmetric Key
- SHALL support the following Attributes [KMIP-SPEC]:
a. Alternative Name
b. Application
Specific Information
c. Cryptographic
Algorithm
d. Name
e. Vendor
Attribute
- SHALL support the following Client-to-Server Operations
[KMIP-SPEC]:
a. Create
- SHALL support the following Message Data Structures
[KMIP-SPEC]:
a. Batch
Count value:
i.
1 to 32
b. Batch
Order Option value:
i. True
- SHALL support the following Enumerations
[KMIP-SPEC]:
a. Alternative
Name Type value:
i.
Uninterpreted Text String
b. Cryptographic
Algorithm value:
i.
AES
c. Cryptographic
Length value :
i.
256
d. Key
Format Type value:
i.
Raw
e. Name
Type value:
i.
Uninterpreted Text String
f. Object
Type value:
i.
Symmetric Key
- SHALL support Vendor Attributes [KMIP-SPEC] with
the following data types and properties:
a. Date
Time
b. Integer
c. Text
String
- SHALL support a minimum length of 255 characters for Vendor
Attributes [KMIP-SPEC] and Name [KMIP-SPEC] values where the
attribute type is of variable length
- SHALL support a minimum of 30 Vendor Attributes
[KMIP-SPEC] per managed object
- SHALL support a minimum of 64 characters in Vendor
Attributes [KMIP-SPEC] names
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.12.5
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
Determine server configuration details including operations
supported (only the mandatory operations are listed in the response example),
objects supported (only the mandatory objects types are listed in the response
example), optional server information, and optional list of application name
spaces. Additional information MAY be returned by tape library clients and
servers.
See test-cases/kmip-v2.1/mandatory/TL-M-1-21.xml.
This case may occur when the Write operation starts with the
first block on a tape. The implementation may choose which Write operations qualify
for creation of a new key. Regardless of the initiating circumstances, the Tape
Library requests the server to create a new AES-256 symmetric key with
appropriate identifying information which is unique within the Application
Namespace.
Additional custom attributes MAY be specified in order to:
- ensure uniqueness of the key identifier when later
Locating the key via Application Specific Information
- provide human-readable information (such as the tape
Barcode value)
- provide information to support client-specific purposes
Tape Library implementations are not required to use custom
attributes and custom attributes within the create request MAY be omitted.
A Tape Library client MAY elect to perform the steps in
separate requests. A Tape Library server SHALL support both requests containing
multiple batch items and multiple equivalent requests containing single batch
items within each request.
See test-cases/kmip-v2.1/mandatory/TL-M-2-21.xml.
The Tape Library constructs an identifier string based on
the method in Tape Library Application Specific Information (5.12.2),
and requests the server to locate the matching managed object for that
Application Specific Information value. A Get is then requested based on the
key's unique identifier. The Tape Library MAY update attributes associated with
the Symmetric Key Managed Object. The following test case shows extensive use
of custom attributes. Custom attributes are not required if the Application
Name is unique within the Application Namespace. An implementation may also use
custom attributes for vendor-unique purposes, or to improve usability.
Tape Library implementations are not required to use custom
attributes and those steps within the test case that refer to custom attribute
setting and update are optional, and MAY be omitted. The steps using Get
Attribute List, Get Attributes and Modify Attribute are optional for a client
to use but remain mandatory for a server to support for those clients that
elect to use the custom attributes.
A Tape Library client MAY elect to perform the steps in
separate requests. A Tape Library server SHALL support both requests containing
multiple batch items and multiple equivalent requests containing single batch
items within each request.
The test case destroys the key created in the previous test
case to clean up after the test. Tape Library implementations MAY elect to not
perform this step.
See test-cases/kmip-v2.1/mandatory/TL-M-3-21.xml.
The AES XTS Profile is a KMIP server performing AES XTX key
generation related operations based on requests received from a KMIP client.
KMIP clients conformant to this profile:
- SHALL conform to the Baseline Client (section 5.1.1)
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.10.1
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
KMIP servers conformant to this profile:
- SHALL conform to the Baseline Server (section 5.1.2)
- SHALL support the following Objects [KMIP-SPEC]
a. Symmetric
Key
- SHALL support the following Attributes [KMIP-SPEC]
a. Object
Type
- SHALL support the following Client-to-Server Operations
[KMIP-SPEC]:
- Create
- SHALL support the following Enumerations
[KMIP-SPEC]:
d. Cryptographic
Algorithm with values:
i. AES
e. Key
Format Type with value:
i. Raw
ii. Transparent
Symmetric Key
f. Object
Type with value:
i. Symmetric
Key
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.13.2
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
Usage of AES XTS directly without a key encrypting key
(KEK).
See test-cases/kmip-v2.1/mandatory/AX-M-1-21.xml.
Usage of AES XTS directly with a key encrypting key (KEK).
See test-cases/kmip-v2.1/mandatory/AX-M-2-21.xml.
KMIP clients conformant to this profile under [KMIP-SPEC]:
- SHALL conform to the Baseline Client (section 5.1.1)
2. SHALL
support TLS v1.3 [RFC8446]
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section
4. MAY
support extensions outside the scope of this standard (e.g., vendor extensions,
conformance clauses) that do not contradict any KMIP requirements.
KMIP servers conformant to this profile under [KMIP-SPEC]:
- SHALL conform to the Baseline Server (section 5.1.2)
2.
SHALL support TLS
v1.3 [RFC8446]
- SHALL support the following Objects [KMIP-SPEC]
- Certificate
- Private Key
- Public Key
- Symmetric Key
- SHALL support the following Attributes [KMIP-SPEC]
a. Cryptographic
Algorithm
b. Cryptographic
Length
c. Protection
Level
d. Protection
Period
e. Quantum
Safe
- SHALL support the following Client-to-Server Operations
[KMIP-SPEC]:
a. Certify
b. Create
c. Create
Key Pair
d. Decrypt
e. Encrypt
f. Re-Certify
g. Register
h. Re-key
i. Re-key
Key Pair
j. Sign
k. Signature
Verify
- SHALL support the following Server-to-Client
Operations [KMIP-SPEC]:
a. Notify
b. Put
- SHALL support the following Enumerations
[KMIP-SPEC]:
a. Recommended
Curve value:
i. P-384
(SECP384R1)
ii. P-521
b. Certificate
Type value:
i. X.509
c. Cryptographic
Algorithm value:
i. AES
ii. ChaCha20
iii. ChaChar20Poly1305
iv. McEliece-6960119
v. McEliece-8192128
vi. SPHINCS-256
d. Hashing
Algorithm value:
i. SHA-384
ii. SHA-512
iii. SHA3-256
iv. SHA3-384
v. SHA3-512
e. Object
Type value:
i. Certificate
ii. Private
Key
iii. Public
Key
iv. Symmetric
Key
f. Key
Format Type value:
i. Raw
ii. X.509
g. Digital
Signature Algorithm value:
i. ECDSA
with SHA384 (on P-384)
ii. Ed25519 with Ed25519
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.14.
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not conflict with
any KMIP requirements.
This section documents the test cases that a client or
server conformant to this profile SHALL support.
Perform a Query operation, querying the Operations and
Objects supported by the server, and get a successful response.
The specific list of operations noted in the test case are
the minimum list of operations – additional operations MAY be supported.
The TLS protocol version and cipher suite SHALL be TLS v1.3 [RFC8446].
See test-cases/kmip-v2.1/mandatory/QS-M-1-21.xml.
5.17.2 QS-M-2-21 - Create
Perform a Create operation, stating the period the key must
be able to offer protection (Protection Period) and the relative sensitivity of
the information (Protection Type).
The TLS protocol version and cipher suite SHALL be TLS v1.3 [RFC8446].
See test-cases/kmip-v2.1/mandatory/QS-M-2-21.xml.
The PKCS profile specifies the
use of KMIP to encapsulate PKCS#11 calls.
PKCS#11 function calls are
mapped into a KMIP PKCS#11 operation. The parameters are a direct
representation of the parameters of the PKCS#11 functions, attributes and other
structures defined in [PKCS#11],
The function return values are
provided directly in the PKCS#11 Return Code field in the Response Payload.
Output Parameters may be omitted in the case of an error status.
For scalar types, CK_BYTE is
represented as a single byte, while CK_ULONG and CK_LONG values are transmitted
as 8 bytes, network byte order (big-endian). Other PKCS#11 types are built
upon those base types as defined in [PKCS#11]. For example, a CK_DATE is a
four-byte year followed by a two-byte month and a two-byte day, each byte
representing an ASCII character. Strings are either space padded, or null
terminated as defined in [PKCS#11].
If a parameter or element of a
structure represents a pointer to a structure, then the elements of that
structure are inserted in line, with its input or output elements listed
recursively. If a parameter represents a fixed length array, then the elements
appear in order. If the length is variable, then the count of the number of
elements is provided immediately before the array and removed from its original
position in the parameter list or structure. CK_ULONGs that represent a count
or length are represented as 4 bytes big-endian values.
PKCS#11 functions that handle
variable length data structures use a pattern in which the caller first calls
with null pointers and the library then fills in the required length. This
enables the caller to allocate sufficient memory for the result and call the
function a second time with non-null pointers. An additional byte is inserted
before such parameters in requests to indicate whether the values are required,
or just the lengths.
Templates are represented by a
4-byte big-endian count of attributes followed by the attributes themselves.
They may be encoded with or without the values for C_GetAttributeValue which
reflects whether it has been called with null pointers or has maximum lengths
already determined.
For each attribute a one-byte value
indicator flag that indicates whether a value was defined via the pValue field
of the attribute. This is followed by a second one-byte count indicator flag
that indicates if a multiple of the count of values was defined via the
ulValueLen field of the attribute. If the count indicator is set to false (0),
then the value indicator SHALL be set to false (0) also. In the case of a
C_GetAttributeValue input request, the value indicator SHALL be set to false
(0) unless the value is an array attribute other than CKA_ALLOWED_MECHANISMS. .
Fixed length attributes (attributes
of type CK_ULONG, CK_BYTE, CK_BOOL, CK_CHAR and fixed length arrays of those
types) are provided in line, with an implicit count of the number of elements
which is not present in the encoding. Byte strings are also provided in line
but preceded by a 4-byte big-endian count of the number of bytes. CKA_ALLOWED_MECHANISMS
attribute values are preceded by a count of the number of elements followed by
the values themselves; all other array attributes are stored recursively in the
same manner as the encapsulating template.
Mechanisms are encoded by an
8-byte big-endian mechanism number followed by a one-byte flag that indicates
whether the parameter field follows. If the flag is set (to 1), it is
followed by a 4-byte big-endian field that stores the length in bytes of any
mechanism parameter followed by the parameter itself. If the parameter is
a byte string such as an Initialization Vector it is preceded by a second
4-byte big-endian length. The fields in structured parameters such as
CK_GCM_PARAMS are simply stored sequentially, with any contained byte strings
also preceded by a 4-byte big-endian length.
Values and functions that are
only meaningful to the API itself are not encapsulated, nor are void pointers
that do not have any well-defined meaning. In particular:-
- C_Initialize does
not pass through the pInitArgs structure. (It contains pointers to
multi-threading functions.)
- C_Initialize passes
a single BYTE parameter that encodes the version of this encoding. The
version SHALL be set to 1 for implementations conformant to this profile.
- C_Finalize does not
pass through its parameter.
- C_GetFunctionList
is not used. A PKCS#11 stub is expected to provide the function list
without reference to the KMIP server.
- C_GetInterface is
not used. A PKCS#11 stub is expected to provide the interface without
reference to the KMIP server.
- C_WaitForSlotEvent
is not used.
- Callbacks are not
supported. Accordingly, the Notify parameter on C_OpenSession is not
passed to the server.
CK_RV rv;
CK_FUNCTION_LIST_PTR
pFunctionList;
CK_C_Initialize
pC_Initialize;
rv = C_GetFunctionList(&pFunctionList);
/* C_GetFunctionLists in V3.0 */
pC_Initialize =
pFunctionList -> C_Initialize;
/* Call the C_Initialize
function in the library */
CK_C_INITIALIZE_ARGS
InitArgs;
InitArgs.CreateMutex =
&MyCreateMutex;
InitArgs.DestroyMutex =
&MyDestroyMutex;
InitArgs.LockMutex =
&MyLockMutex;
InitArgs.UnlockMutex =
&MyUnlockMutex;
InitArgs.flags =
CKF_OS_LOCKING_OK;
InitArgs.pReserved =
NULL_PTR;
rv = (*pC_Initialize)((CK_VOID_PTR)&InitArgs);
CK_INFO info;
rv = (*(pFunctionList
-> C_GetInfo))(&info);
if(info.version.major ==
2) {...}
CK_SLOT_ID pSlotList[64];
CK_ULONG ulSlotCount = 64;
rv = (*(pFunctionList
->C_GetSlotList))(CK_TRUE, pSlotList, ulSlotCount);
C_GetFunctionList
Not passed through
Input C_Initialize
<PKCS_11Function
type="Enumeration" value="C_Initialize"/>
<PKCS_11InputParameters type="Byte String" value= ...
01 Version
of encoding
Output C_Initialize
<PKCS_11Function
type="Enumeration" value="C_Initialize"/>
<CorrelationValue type="ByteString"
value="ABCD1234"/>
<PKCS_11ReturnCode
type="Enumeration" value="OK"/>
<!-- No Output
parameters -->
Input C_GetInfo
<PKCS_11Function
type="Enumeration" value="C_GetInfo"/>
<CorrelationValue type="ByteString"
value="ABCD1234"/>
<!-- No Input
Parameters -->
Output C_GetInfo
<PKCS_11Function
type="Enumeration" value="C_GetInfo"/>
<CorrelationValue type="ByteString"
value="ABCD1234"/>
<PKCS_11OutputParameters
type="Byte String" value=
<!-- Fields defined
by CK_INFO structure. -->
0228 cryptokiVersion
4142...
manufacturerID 32 bytes, blank filled
0000 0000 0000 0000 flags
4142... libraryDescription
32 bytes, blank filled
0101
libraryVersion
<PKCS_11ReturnCode
type="Enumeration" value="OK"/>
Input C_GetSlotList
<PKCS_11Function type="Enumeration"
value="C_GetSlotList"/>
<CorrelationValue type="ByteString"
value="ABCD1234"/>
<PKCS_11InputParameters
type="Byte String" value=
01 CK_TRUE,
tokenPresent indicator
01 Slot
info required
0000 0040 64
slots in the request array
Output C_GetSlotList
<PKCS_11Function
type="Enumeration" value="C_GetSlotList"/>
<CorrelationValue type="ByteString"
value="ABCD1234"/>
<PKCS_11OutputParameters
type="Byte String" value=
<!-- Fields defined
by parameter list. -->
01 Slot
values are present
0000 0002 ulSlotCount
returned
0000 0000 1234 5678 First
CK_SLOT_ID
0000 0000 ABCD 0987 Second
CK_SLOT_ID
<PKCS_11ReturnCode
type="Enumeration" value="OK"/>
#define PLAINTEXT_BUF_SZ
195
#define CIPHERTEXT_BUF_SZ
256
CK_ULONG firstPartLen,
secondPartLen;
CK_SESSION_HANDLE hSession
= 0x12345678; /* For example only */
CK_OBJECT_HANDLE hKey =
0x87654321;
CK_BYTE iv[8] = {1 ,2 ,3,
4, 5, 6, 7, 8};
CK_MECHANISM mechanism = {
CKM_DES_CBC_PAD, iv,
sizeof(iv)
};
CK_BYTE
data[PLAINTEXT_BUF_SZ] = {01, 02, 03, …};
CK_BYTE
encryptedData[CIPHERTEXT_BUF_SZ];
CK_ULONG
ulEncryptedData1Len; /* Output only(!) */
CK_ULONG
ulEncryptedData2Len;
CK_ULONG ulEncryptedData3Len;
.
.
firstPartLen = 90;
secondPartLen =
PLAINTEXT_BUF_SZ-firstPartLen;
C_EncryptInit(hSession, &mechanism, hKey);
/* Encrypt first Part */
ulEncryptedData1Len =
sizeof(encryptedData);
C_EncryptUpdate(
hSession,
&data[0], firstPartLen,
&encryptedData[0],
&ulEncryptedData1Len);
/* Encrypt second Part */
ulEncryptedData2Len =
sizeof(encryptedData)-ulEncryptedData1Len;
C_EncryptUpdate(
hSession,
&data[firstPartLen], secondPartLen,
&encryptedData[ulEncryptedData1Len], &ulEncryptedData2Len);
/* Get last little
encrypted bit */
ulEncryptedData3Len =
sizeof(encryptedData)-ulEncryptedData1Len-ulEncryptedData2Len;
C_EncryptFinal(
hSession,
&encryptedData[ulEncryptedData1Len+ulEncryptedData2Len],
&ulEncryptedData3Len);
Input C_EncryptInit
<PKCS_11Function
type="Enumeration" value="C_EncryptInit"/>
<CorrelationValue type="ByteString"
value="ABCD1234"/>
<PKCS_11InputParameters type="Byte String" value= ...
0000 0000 1234 5678 hSession
0000 0000 0000 0125 CKM_DES_CBC_PAD
01 Parameter
is present
0000 000C Entire
parameter length encoding
0000 0008
ulParameterLen (for simple CK_BYTE array)
0102 0304 0506 0708 pParameter,
the IV
0000 0000 8765 4321 hKey
Output C_EncryptInit
<PKCS_11Function
type="Enumeration" value="C_EncryptInit"/>
<CorrelationValue type="ByteString"
value="ABCD1234"/>
<PKCS_11ReturnCode type="Enumeration" value="OK"/>
Input C_EncryptUpdate 1
<PKCS_11Function
type="Enumeration" value="C_EncryptUpdate"/>
<CorrelationValue type="ByteString"
value="ABCD1234"/>
<PKCS_11InputParameters
type="Byte String" value= ...
0000 0000 1234 5678 hSession
0000 005A
90, firstPartLen
0102 0304 … 595A 90
bytes of plain text
01 encryptedPart
wanted
0000 0100 256
available in encryptedPart buffer
Output C_EncryptUpdate 1
<PKCS_11Function
type="Enumeration" value="C_EncryptUpdate"/>
<CorrelationValue type="ByteString"
value="ABCD1234"/>
<PKCS_11OutputParameters
type="Byte String" value= ...
0000 0058 88,
SIZE OF the first 11 blocks
A698 C3D8 ... 88
bytes of cipher text
<PKCS_11ReturnCode
type="Enumeration" value="OK"/>
Input C_EncryptUpdate 2
<PKCS_11Function
type="Enumeration" value="C_EncryptUpdate"/>
<CorrelationValue type="ByteString"
value="ABCD1234"/>
<PKCS_11InputParameters
type="Byte String" value= ...
0000 0000 1234 5678 hSession
0000 006E
105, secondPartLen
5B5C 5D5E ... C2C3
105 bytes of plain text
01 encryptedPart
wanted
0000 00A8 256
- 88 available in encryptedPart buffer
Output C_EncryptUpdate 2
<PKCS_11Function
type="Enumeration" value="C_EncryptUpdate"/>
<CorrelationValue type="ByteString"
value="ABCD1234"/>
<PKCS_11OutputParameters
type="Byte String" value= ...
0000 0058 104,
size the second 13 blocks
4A69 5C3D … 104
bytes of cipher text; 1 byte outstanding.
<PKCS_11ReturnCode
type="Enumeration" value="OK"/>
Input C_EncryptFinal
<PKCS_11Function
type="Enumeration" value="C_EncryptFinal"/>
<CorrelationValue type="ByteString"
value="ABCD1234"/>
<PKCS_11InputParameters
type="Byte String" value= ...
0000 0000 1234 5678 hSession
01 encryptedPart
wanted
0000 0040 256
- 88 - 104 available in encryptedPart buffer
Output C_EncryptFinal
<PKCS_11Function
type="Enumeration" value="C_EncryptFinal"/>
<CorrelationValue type="ByteString"
value="ABCD1234"/>
<PKCS_11OutputParameters
type="Byte String" value= ...
0000 0000 1234 5678 hSession
0000 0008 8,
size the final block
65BA C53D … 8
bytes of cipher text
<PKCS_11ReturnCode
type="Enumeration" value="OK"/>
CK_SESSION_HANDLE hSession
= 0x12345678; /* For example only */
CK_OBJECT_HANDLE hObject =
0x87654321;
CK_BYTE sensitive;
CK_BYTE_PTR
checkValue[16];
CKA_MECHANISM_TYPE
mechanisms[64];
CK_ATTRIBUTE template[] =
{
{CKA_SENSITIVE,
sensitive, sizeof(sensitive)},
{CKA_CHECK_VALUE,
checkValue, sizeof(checkValue)},
{CKA_ALLOWED_MECHANISMS,
mechanisms, sizeof(mechanisms)},
{CKA_LABEL, NULL_PTR, 42
}
};
CK_RV rv;
rv = C_GetAttributeValue(hSession,
hObject, &template, 4);
Input
<PKCS_11Function type="Enumeration"
value="C_GetAttributeValue"/>
<CorrelationValue type="ByteString"
value="ABCD1234"/>
<PKCS_11InputParameters
type="Byte String" value= ...
0000 0000 1234 5678 hSession
0000 0000 8765 4321 hObject
0000 0004 ulCount
(Number of templates, moved up)
0000 0000 0000 0103 CKA_SENSITIVE
00 Value
not defined
01 Length
defined
0000 0000 0000 0090 CKA_CHECK_VALUE
00 Value
not defined
01 Length
defined
0000 0000 4000 0600 CKA_ALLOWED_MECHANISMS
00 Value
not defined
01 Length
defined
0000 0040 64
mechanisms available
00 Value
not defined
00 Length
not defined (is output only)
Output
<PKCS_11Function
type="Enumeration" value="C_GetAttributeValue"/>
<CorrelationValue type="ByteString"
value="ABCD1234"/>
<PKCS_11OutputParameters
type="Byte String" value= ...
0000 0004 ulCount
(Number of templates, moved up)
0000 0000 0000 0103 CKA_SENSITIVE
01 Value
defined
01 Length
defined
01 CK_TRUE
0000 0000 0000 0090 CKA_CHECK_VALUE
01 Value
defined
01 Length
defined
0000 0010 ulValueLen
16 -- number of byte values
1234 ..... ABCD Check value
0000 0000 4000 0600 CKA_ALLOWED_MECHANISMS
01 Value
defined
01 Length
defined
0000 0002 2
mechanisms
0000 0000 0000 0121 CKM_DES_ECB
0000 0000 0000 0125 CKM_DES_CBC_PAD
0000 0000 0000 0003
CKA_LABEL
00 Value
not defined
01 Length
defined
0000 00003 3
bytes (for an example label of “foo”)
<PKCS_11ReturnCode
type="Enumeration" value="OK"/>
KMIP clients conformant to this profile:
- SHALL conform to the Baseline Client (section 5.1.1)
- SHALL conform with PKCS#11 Encoding (5.18.1)
- SHALL support the following Client-to-Server Operations
[KMIP-SPEC]:
- PKCS#11
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.5.2
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
KMIP servers conformant to this profile:
- SHALL conform to the Baseline Server (section 5.1.2)
- SHALL conform with PKCS#11 Encoding (5.18.1)
- SHALL support the following Client-to-Server Operations
[KMIP-SPEC]:
- PKCS#11
- MAY support any clause within [KMIP-SPEC] provided it does
not conflict with any other clause within this section 5.5.3
- MAY support extensions outside the scope of this standard
(e.g., vendor extensions, conformance clauses) that do not contradict any
KMIP requirements.
See test-cases/kmip-v2.1/mandatory/PKCS11-M-1-21.xml.
The baseline server and client profiles provide the most
basic functionality that is expected of a conformant KMIP client or server. The
complete server profile defines a KMIP server that implements the entire
specification. A KMIP implementation conformant to this specification (the Key
Management Interoperability Protocol Profiles) SHALL meet all the conditions
documented in one or more of the following sections.
6.1 Baseline Client Basic
KMIP v2.1 Profile Conformance
KMIP client implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Baseline Client conditions (5.1.1) and;
- SHALL support one or more of the Baseline Mandatory Test
Cases KMIP v2. (5.1.3, 5.6.3).
KMIP server implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Baseline Server conditions (5.1.2) and;
- SHALL support all of the Baseline Mandatory Test Cases
KMIP v2. (5.1.3, 5.6.3).
KMIP server implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Complete Server conditions (5.2) and;
- SHALL support all of the server conformance clauses
contained within Conformance (6)
KMIP client implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the HTTPS Authentication Suite conditions (3.2) and;
- SHALL support the HTTPS Client conditions (5.3.1) and;
- SHALL support all of the HTTPS Mandatory Test Cases KMIP
v2. (5.3.3); and
- SHALL support Baseline Client Basic KMIP v2.1 Profile
Conformance (6.1)
KMIP server implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the HTTPS Authentication Suite conditions (3.2) and;
- SHALL support the HTTPS Server conditions (5.3.2) and;
- SHALL support all of the HTTPS Mandatory Test Cases KMIP
v2. (5.3.3) and;
- SHALL support Baseline Server Basic KMIP v2.1 Profile
Conformance (6.2)
6.6 XML Client KMIP v2.1
Profile Conformance
KMIP client implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the XML Client conditions (5.4.2) and;
- SHALL support one or more of the XML
Mandatory Test Cases KMIP v2. (5.4.4) and;
- SHALL support Baseline Client Basic KMIP v2.1 Profile
Conformance (6.1)
KMIP server implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the XML Server conditions (5.4.3) and;
- SHALL support mapping to/from XML of all TTLV tags and
enumerations specified within [KMIP-SPEC] and;
- SHALL support all of the XML
Mandatory Test Cases KMIP v2. (5.4.4) and;
- SHALL support Baseline Server Basic KMIP v2.1 Profile
Conformance (6.2)
KMIP client implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the JSON Client conditions (5.5.2) and;
- SHALL support one or more of the JSON Mandatory Test Cases
KMIP v2. (5.5.4) and;
- SHALL support Baseline Client Basic KMIP v2.1 Profile
Conformance (6.1)
KMIP server implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the JSON Client conditions (5.5.2) and;
- SHALL support mapping to/from JSON all TTLV tags and
enumerations specified within [KMIP-SPEC] and;
- SHALL support all of the JSON Mandatory Test Cases KMIP
v2. (5.5.4) and;
- SHALL support Baseline Server Basic KMIP v2.1 Profile
Conformance (6.2)
KMIP client implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Symmetric Key Lifecycle Client
conditions (5.6.1) and;
- SHALL support one or more of the Symmetric Key Lifecycle
Mandatory Test Cases KMIP v2. (5.6.3) and;
- SHALL support Baseline Client Basic KMIP v2.1 Profile
Conformance (6.1)
6.11 Symmetric Key
Lifecycle Server KMIP v2.1 Profile Conformance
KMIP server implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Symmetric Key Lifecycle Server
conditions (5.6.2) and;
- SHALL support all of the Symmetric Key Lifecycle Mandatory
Test Cases KMIP v2. (5.6.3) and;
- SHALL support Baseline Server Basic KMIP v2.1 Profile
Conformance (6.2)
KMIP client implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Basic Symmetric Key Foundry Client
conditions (5.7.1) and;
- SHALL support one or more of the Basic Symmetric Key Foundry
Mandatory Test Cases KMIP v2. (5.7.5) and;
- SHALL support Baseline Client Basic KMIP v2.1 Profile
Conformance (6.1)
KMIP client implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Basic Symmetric Key Foundry Client
conditions (5.7.1) and;
- SHALL support one or more of the Intermediate Symmetric Key
Foundry Mandatory Test Cases KMIP v2. (5.7.6) and;
- SHALL support Baseline Client Basic KMIP v2.1 Profile
Conformance (6.1)
KMIP client implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Basic Symmetric Key Foundry Client
conditions (5.7.1) and;
- SHALL support one or more of the Advanced Symmetric Key Foundry
Mandatory Test Cases KMIP v2. (5.7.7) and;
- SHALL support Baseline Client Basic KMIP v2.1 Profile
Conformance (6.1)
KMIP server implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Symmetric Key Foundry Server conditions
(5.7.4) and;
- SHALL support all of the Basic Symmetric Key Foundry Mandatory
Test Cases KMIP v2. (5.7.5) and;
- SHALL support all of the Intermediate Symmetric Key Foundry
Mandatory Test Cases KMIP v2. (5.7.6) and;
- SHALL support all of the Advanced Symmetric Key Foundry Mandatory
Test Cases KMIP v2. (5.7.7) and;
- SHALL support Baseline Server Basic KMIP v2.1 Profile
Conformance (6.2)
KMIP client implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Asymmetric Key Lifecycle Client
conditions (5.8.1) and;
- SHALL support one or more of the Asymmetric Key Lifecycle
Mandatory Test Cases KMIP v2. (5.8.3) and;
- SHALL support Baseline Client Basic KMIP v2.1 Profile
Conformance (6.1)
KMIP server implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Asymmetric Key Lifecycle Server
conditions (5.8.2) and;
- SHALL support all of the Asymmetric Key Lifecycle
Mandatory Test Cases KMIP v2. (5.8.3) and;
- SHALL support Baseline Server Basic KMIP v2.1 Profile
Conformance (6.2)
KMIP client implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Basic Cryptographic Client conditions (5.9.1) and;
- SHALL support one or more of the Basic Cryptographic
Mandatory Test Cases KMIP v2. (5.9.7) and;
- SHALL support Baseline Client Basic KMIP v2.1 Profile
Conformance (6.1)
KMIP client implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Advanced Cryptographic Client conditions
(5.9.2) and;
- SHALL support one or more of the Advanced Cryptographic
Mandatory Test Cases KMIP v2. (5.9.8) and;
- SHALL support Baseline Client Basic KMIP v2.1 Profile
Conformance (6.1)
KMIP client implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the RNG Cryptographic Client conditions (5.9.3) and;
- SHALL support one or more of the RNG Cryptographic
Mandatory Test Cases KMIP v2. (5.9.9) and;
- SHALL support Baseline Client Basic KMIP v2.1 Profile
Conformance (6.1)
KMIP server implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Basic Cryptographic Server conditions (5.9.4) and;
- SHALL support all of the Basic Cryptographic Mandatory
Test Cases KMIP v2. (5.9.7) and;
- SHALL support Baseline Server Basic KMIP v2.1 Profile
Conformance (6.2)
KMIP server implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Advanced Cryptographic Server conditions
(5.9.5) and;
- SHALL support all of the Advanced Cryptographic Mandatory
Test Cases KMIP v2. (5.9.8) and;
- SHALL support Baseline Server Basic KMIP v2.1 Profile
Conformance (6.2)
KMIP server implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the RNG Cryptographic Server conditions (5.9.6) and;
- SHALL support all of the RNG Cryptographic Mandatory Test
Cases KMIP v2. (5.9.9) and;
- SHALL support Baseline Server Basic KMIP v2.1 Profile
Conformance (6.2)
KMIP client implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Opaque Managed Object Store Client
conditions (5.10.1) and;
- SHALL support one or more of the Opaque Managed Object
Mandatory Test Cases KMIP v2. (5.10.3) and;
- SHALL support Baseline Client Basic KMIP v2.1 Profile
Conformance (6.1)
KMIP server implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Opaque Managed Object Store Server
conditions (5.10.2) and;
- SHALL support all of the Opaque Managed Object Mandatory
Test Cases KMIP v2. (5.10.3) and;
- SHALL support Baseline Server Basic KMIP v2.1 Profile
Conformance (6.2)
KMIP client implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Storage Array with Self-Encrypting
Drives Client conditions (5.11.1) and;
- SHALL support one or more of the Storage
Array with Self-Encrypting Drives Mandatory Test Cases KMIP v2. (5.11.3 ) and;
- SHALL support Baseline Client Basic KMIP v2.1 Profile
Conformance (6.1)
KMIP server implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Storage Array with Self-Encrypting
Drives Server conditions (5.11.2) and;
- SHALL support all of the Storage Array with
Self-Encrypting Drives Mandatory Test Cases KMIP v2. (5.11.3)
and;
- SHALL support Baseline Server Basic KMIP v2.1 Profile
Conformance (6.2)
KMIP client implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Tape Library Client conditions (5.12.4 ) and;
- SHALL support the Tape Library Application Specific
Information conditions (5.12.2) and;
- SHALL support the Tape Library Alternative Name conditions
(5.12.3) and;
- SHALL support one or more of the Tape Library Mandatory
Test Cases KMIP v2. (5.12.6) and;
- SHALL support Baseline Client Basic KMIP v2.1 Profile
Conformance (6.1)
KMIP server implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Tape Library Server conditions (5.12.5 ) and;
- SHALL support the Tape Library Application Specific
Information conditions (5.12.2) and;
- SHALL support the Tape Library Alternative Name conditions
(5.12.3) and;
- SHALL support all of the Tape Library Mandatory Test Cases
KMIP v2. (5.12.6) and;
- SHALL support Baseline Server Basic KMIP v2.1 Profile
Conformance (6.2)
KMIP client implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the AES XTS Client conditions (5.13.1 ) and;
- SHALL support one or more of the AES XTS Mandatory Test
Cases KMIP v2. (5.13.3) and;
- SHALL support Baseline Client Basic KMIP v2.1 Profile
Conformance (6.1)
KMIP server implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the AES XTS Server conditions (5.13.2 ) and;
- SHALL support all of the AES XTS Mandatory Test Cases KMIP
v2. (5.13.3) and;
- SHALL support Baseline Server Basic KMIP v2.1 Profile
Conformance (6.2)
KMIP client implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Quantum Safe Client conditions (5.15) and;
- SHALL support one or more of the Mandatory Quantum Safe
Test Cases KMIP v2. (5.17); and
- SHALL support Baseline Client Basic KMIP v2.1 Profile
Conformance (6.1)
KMIP server implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the Quantum Safe Server conditions (5.16) and;
- SHALL support all of the Mandatory
Quantum Safe Test Cases KMIP v2. (5.17)
and;
- SHALL support Baseline Server Basic KMIP v2.1 Profile
Conformance (6.2)
KMIP client implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the PKCS#11 Client conditions (5.18.3 ) and;
- SHALL support one or more of the PKCS#11 Mandatory Test
Cases KMIP v2. (5.18.5) and;
- SHALL support Baseline Client Basic KMIP v2.1 Profile
Conformance (6.1)
KMIP server implementations conformant to this profile:
- SHALL support [KMIP-SPEC]
- SHALL support the Basic Authentication Suite conditions (3.1) and;
- SHALL support the PKCS#11 Server conditions (5.18.4 ) and;
- SHALL support one or more of the PKCS#11 Mandatory Test
Cases KMIP v2. (5.18.5) and;
- SHALL support Baseline Server Basic KMIP v2.1 Profile
Conformance (6.2)
The following individuals have participated in the creation
of this specification and are gratefully acknowledged:
Participants:
|
Salutation
|
First Name
|
Last Name
|
Company
|
|
Mr.
|
Ray
|
An
|
PlatON
|
|
Dr.
|
Warren
|
Armstrong
|
QuintessenceLabs Pty Ltd.
|
|
Mr.
|
Todd
|
Arnold
|
IBM
|
|
Mr.
|
Dan
|
Ashbaugh
|
Hewlett Packard Enterprise
(HPE)
|
|
Mr.
|
Rinkesh
|
Bansal
|
IBM
|
|
|
Jeff
|
Bartell
|
Individual
|
|
Mr.
|
Tom
|
Benjamin
|
IBM
|
|
|
Anthony
|
Berglas
|
Cryptsoft Pty Ltd.
|
|
Mr.
|
Dieter
|
Bong
|
Utimaco IS GmbH
|
|
|
Todd
|
Bottger
|
Oracle
|
|
Mr.
|
Patrick
|
Bredenberg
|
Oracle
|
|
Mr.
|
Alan
|
Brown
|
Thales e-Security
|
|
|
Andrew
|
Byrne
|
Dell
|
|
|
Mike
|
Capone
|
Fornetix
|
|
|
Solomon
|
Cates
|
Thales e-Security
|
|
Mr.
|
Ed
|
Chang
|
Utimaco IS GmbH
|
|
|
Tim
|
Chevalier
|
NetApp
|
|
|
Kenli
|
Chong
|
QuintessenceLabs Pty Ltd.
|
|
|
James Bryce
|
Clark
|
OASIS
|
|
Mr.
|
Justin
|
Corlett
|
Cryptsoft Pty Ltd.
|
|
Mr.
|
Tony
|
Cox
|
Cryptsoft Pty Ltd.
|
|
Mr.
|
James
|
Crossland
|
Northrop Grumman
|
|
Mr
|
Quan
|
Dinh
|
Oracle
|
|
Mr.
|
Stephen
|
Edwards
|
Semper Fortis Solutions
|
|
Mr.
|
Chet
|
Ensign
|
OASIS
|
|
Mr.
|
Faisal
|
Faruqui
|
"Fortanix, Inc."
|
|
|
David
|
Featherstone
|
Thales e-Security
|
|
Dr.
|
Robert
|
Fitzpatrick
|
Thales e-Security
|
|
Mr.
|
Jan
|
Friedel
|
Oracle
|
|
|
Judith
|
Furlong
|
Dell
|
|
Mr.
|
Deepak
|
Gaikwad
|
Dell
|
|
Mr.
|
Gary
|
Gardner
|
Fornetix
|
|
Mr.
|
Xiaoyu
|
Ge
|
"Huawei Technologies
Co., Ltd."
|
|
Ms.
|
Susan
|
Gleeson
|
Oracle
|
|
Dr.
|
Robert
|
Haas
|
IBM
|
|
Mr.
|
Thomas
|
Hardjono
|
M.I.T.
|
|
Mrs.
|
Jane
|
Harnad
|
OASIS
|
|
Ms.
|
Varsharani
|
Hawanna
|
IBM
|
|
Mr.
|
Steve
|
He
|
Thales e-Security
|
|
Mr.
|
Christopher
|
Hillier
|
Hewlett Packard Enterprise
(HPE)
|
|
|
Tim
|
Hudson
|
Cryptsoft Pty Ltd.
|
|
Mr.
|
Gershon
|
Janssen
|
Individual
|
|
|
Michael
|
Jenkins
|
National Security Agency
|
|
Mrs.
|
Elysa
|
Jones
|
Individual
|
|
Dr.
|
Mark
|
Joseph
|
"P6R, Inc"
|
|
Mr.
|
Shubham
|
Kale
|
IBM
|
|
Mr.
|
Mahadev
|
Karadigudda
|
NetApp
|
|
Mr.
|
Jason
|
Katonica
|
IBM
|
|
Mr.
|
Richard
|
Kisley
|
IBM
|
|
Ms.
|
Dina
|
Kurktchi-Nimeh
|
Oracle
|
|
Mr.
|
Paul
|
Lechner
|
KeyNexus Inc
|
|
Dr.
|
Sun-ho
|
Lee
|
"Hancom Secure,
Inc."
|
|
|
John
|
Leiseboer
|
QuintessenceLabs Pty Ltd.
|
|
Mr.
|
Jarrett
|
Lu
|
Oracle
|
|
|
Jeff
|
MacMillan
|
KeyNexus Inc
|
|
|
Chris
|
Malafis
|
Red Hat
|
|
|
Web
|
Master
|
OASIS
|
|
Dr.
|
Jane
|
Melia
|
QuintessenceLabs Pty Ltd.
|
|
Mr.
|
Prashant
|
Mestri
|
IBM
|
|
Ms.
|
Ladan
|
Nekuii
|
Thales e-Security
|
|
|
Jason
|
Novecosky
|
KeyNexus Inc
|
|
Mr.
|
Martin
|
Oczko
|
PrimeKey Solutions AB
|
|
Mr.
|
Oreste
|
Panaia-Costa
|
PrimeKey Solutions AB
|
|
Mr.
|
Sanjay
|
Panchal
|
IBM
|
|
Mr.
|
Mahesh
|
Paradkar
|
IBM
|
|
Dr.
|
Sung-Wook
|
Park
|
"Hancom Secure,
Inc."
|
|
Mr.
|
John
|
Peck
|
IBM
|
|
Mr.
|
Michael
|
Phillips
|
Dell
|
|
|
James
|
Qu
|
PlatON
|
|
Mr.
|
Saravanan
|
Ramalingam
|
Thales e-Security
|
|
Mr.
|
Bruce
|
Rich
|
Cryptsoft Pty Ltd.
|
|
Mr.
|
Jack
|
Richins
|
Microsoft
|
|
Mr.
|
Rick
|
Robinson
|
IBM
|
|
Mr.
|
Greg
|
Scott
|
Cryptsoft Pty Ltd.
|
|
|
Faiyaz
|
Shahpurwala
|
"Fortanix, Inc."
|
|
Mr.
|
Martin
|
Shannon
|
QuintessenceLabs Pty Ltd.
|
|
|
Jacob
|
Sheppard
|
IBM
|
|
Mr.
|
Duncan
|
Sparrell
|
sFractal Consulting LLC
|
|
Mr.
|
Benton
|
Stark
|
Cisco Systems
|
|
Mr.
|
Petko
|
Stoyanov
|
McAfee
|
|
Mr.
|
Gerald
|
Stueve
|
Fornetix
|
|
|
Jim
|
Susoy
|
"P6R, Inc"
|
|
Mr.
|
Jason
|
Thatcher
|
Cryptsoft Pty Ltd.
|
|
|
Peter
|
Tsai
|
Thales e-Security
|
|
Mr.
|
Manish
|
Upasani
|
Utimaco IS GmbH
|
|
Mr.
|
Saarthak
|
Vadhera
|
IBM
|
|
Mr.
|
Nishank
|
Vaish
|
"Fortanix, Inc."
|
|
Mr.
|
Charles
|
White
|
Fornetix
|
|
Mr.
|
Steven
|
Wierenga
|
Utimaco IS GmbH
|
|
|
Kyle
|
Wuolle
|
KeyNexus Inc
|
|
|
Xiang
|
Xie
|
PlatON
|
|
|
Krishna
|
Yellepeddy
|
IBM
|
|
|
Tao
|
Yuan
|
SAP SE
|
|
Ms.
|
Magda
|
Zdunkiewicz
|
Cryptsoft Pty Ltd.
|
|
Revision
|
Date
|
Editor
|
Changes Made
|
|
wd01
|
25-July-2019
|
Tim Chevalier
|
Initial draft
|
