Committee Specification Draft 01 /
Public Review Draft 01
16 April 2013
- Specification URIs
- This version:
- http://docs.oasis-open.org/xliff/xliff-core/v2.0/csprd01/xliff-core-v2.0-csprd01.html
(Authoritative)
http://docs.oasis-open.org/xliff/xliff-core/v2.0/csprd01/xliff-core-v2.0-csprd01.pdf
http://docs.oasis-open.org/xliff/xliff-core/v2.0/csprd01/xliff-core-v2.0-csprd01.xml
- Previous version:
- N/A
- Technical Committee:
- OASIS XML Localisation Interchange File Format (XLIFF) TC
- Chair:
- Bryan Schnabel (bryan.s.schnabel@tektronix.com), Individual
- Editors:
- Tom Comerford (tom@supratext.com), Individual
David Filip (davidf@ul.ie), Localisation Research Centre
Rodolfo M. Raya (rmraya@maxprograms.com), Maxprograms
Yves Savourel (ysavourel@enlaso.com), ENLASO Corporation
- Additional artifacts:
This prose specification is one component of a Work Product that also includes:
XML schemas accessible from http://docs.oasis-open.org/xliff/xliff-core/v2.0/csprd01/schemas/
- Related Work:
This specification replaces or supersedes:
XLIFF Version 1.2. 1 February 2008. OASIS Standard. http://docs.oasis-open.org/xliff/v1.2/os/xliff-core.html
- Declared XML Namespaces:
urn:oasis:names:tc:xliff:document:2.0
urn:oasis:names:tc:xliff:matches:2.0
urn:oasis:names:tc:xliff:glossary:2.0
urn:oasis:names:tc:xliff:fs:2.0
urn:oasis:names:tc:xliff:metadata:2.0
urn:oasis:names:tc:xliff:resourcedata:2.0
urn:oasis:names:tc:xliff:changetracking:2.0
urn:oasis:names:tc:xliff:sizerestriction:2.0
urn:oasis:names:tc:xliff:validation:2.0
- Status:
This document was last revised or approved by the OASIS XML Localisation Interchange File Format (XLIFF) TC on the above date. The level of approval is also listed above. Check the “Latest version” location noted above for possible later revisions of this document.
Technical Committee members should send comments on this specification to the Technical Committee's email list. Others should send comments to the Technical Committee by using the "Send A Comment" button on the Technical Committee's web page at http://www.oasis-open.org/committees/xliff.
For information on whether any patents have been disclosed that may be essential to implementing this specification, and any offers of patent licensing terms, please refer to the Intellectual Property Rights section of the Technical Committee web page (http://www.oasis-open.org/committees/xliff/ipr.php).
- Citation format:
When referencing this specification the following citation format should be used:
[XLIFF v2.0]
XLIFF Version 2.0. 16 April 2013. OASIS Committee Specification Draft 01 / Public Review Draft 01. http://docs.oasis-open.org/xliff/xliff-core/v2.0/csprd01/xliff-core-v2.0-csprd01.html.
Notices
Copyright © OASIS Open 2013. All Rights Reserved.
All capitalized terms in the following text have the meanings assigned to them in the OASIS Intellectual Property Rights Policy (the "OASIS IPR Policy"). The full Policy may be found at the OASIS website.
This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published, and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this section are included on all such copies and derivative works. However, this document itself may not be modified in any way, including by removing the copyright notice or references to OASIS, except as needed for the purpose of developing any document or deliverable produced by an OASIS Technical Committee (in which case the rules applicable to copyrights, as set forth in the OASIS IPR Policy, must be followed) or as required to translate it into languages other than English.
The limited permissions granted above are perpetual and will not be revoked by OASIS or its successors or assigns.
This document and the information contained herein is provided on an "AS IS" basis and OASIS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY OWNERSHIP RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
OASIS requests that any OASIS Party or any other party that believes it has patent claims that would necessarily be infringed by implementations of this OASIS Committee Specification or OASIS Standard, to notify OASIS TC Administrator and provide an indication of its willingness to grant patent licenses to such patent claims in a manner consistent with the IPR Mode of the OASIS Technical Committee that produced this specification.
OASIS invites any party to contact the OASIS TC Administrator if it is aware of a claim of ownership of any patent claims that would necessarily be infringed by implementations of this specification by a patent holder that is not willing to provide a license to such patent claims in a manner consistent with the IPR Mode of the OASIS Technical Committee that produced this specification. OASIS may include such claims on its website, but disclaims any obligation to do so.
OASIS takes no position regarding the validity or scope of any intellectual property or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; neither does it represent that it has made any effort to identify any such rights. Information on OASIS' procedures with respect to rights in any document or deliverable produced by an OASIS Technical Committee can be found on the OASIS website. Copies of claims of rights made available for publication and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this OASIS Committee Specification or OASIS Standard, can be obtained from the OASIS TC Administrator. OASIS makes no representation that any information or list of intellectual property rights will at any time be complete, or that any claims in such list are, in fact, Essential Claims.
The name "OASIS" is a trademark of OASIS, the owner and developer of this specification, and should be used only to refer to the organization and its official outputs. OASIS welcomes reference to, and implementation and use of, specifications, while reserving the right to enforce its marks against misleading uses. Please see http://www.oasis-open.org/policies-guidelines/trademark for above guidance.
Table of Contents
- 1 Introduction
- 2 Detailed Specifications
- 3 Conformance
Appendixes
- A XML Schemas and Catalog
- B Translation Candidates Module
- C Glossary Module
- D Format Style Module
- E Metadata Module
- F Resource Data Module
- G Change Tracking Module
- H Size Restriction Module
- I Validation Module
- J Acknowledgements (Non-Normative)
XLIFF is the XML Localisation Interchange File Format designed by a group of software providers, localization service providers, and localization tools providers. It is intended to give any software provider a single interchange file format that can be understood by any localization provider.
All text is normative unless otherwise labeled.
The key words must, must not, required, shall, shall not, should, should not, recommended, may, and optional are to be interpreted as described in [RFC 2119]. Note that for reasons of style, these words are not capitalized in this document.
- XLIFF Document
XML document that declares the namespace
"urn:oasis:names:tc:xliff:document:2.0"as its main namespace, has<xliff>as root element and complies with the XML Schemas that are part of this specification.- Translation
A rendering of the meaning of source text, expressed in the target language.
- XLIFF Core
The core of XLIFF 2.0 consists of the minimum set of XML elements and attributes required to (a) prepare a document that contains text extracted from one or more files for localization, (b) allow it to be completed with the translation of the extracted text, and (c) allow the generation of translated versions of the original document.
The XML namespace that corresponds to the core subset of XLIFF 2.0 is
"urn:oasis:names:tc:xliff:document:2.0".- XLIFF Module
A module is an optional set of XML elements and attributes that stores information about a process applied to an XLIFF document and the data incorporated into the document as result of that process.
Each official module defined for XLIFF 2.0 has its grammar defined in an independent XML Schema with a separate namespace.
[BCP 47] M. Davis, Tags for Identifying Languages, http://tools.ietf.org/html/bcp47 IETF (Internet Engineering Task Force).
[RFC 2119] S. Bradner, Key words for use in RFCs to Indicate Requirement Levels, http://www.ietf.org/rfc/rfc2119.txt IETF (Internet Engineering Task Force) RFC 2119, March 1997.
[UAX 15] M. Davis, K. Whistler, UNICODE NORMALIZATION FORMS, http://www.unicode.org/reports/tr15/ Unicode Normalization Forms.
[XML I18N BP] Best Practices for XML Internationalization, 13 February 2008, http://www.w3.org/TR/xml-i18n-bp/ W3C Working Group.
[LDML] Unicode Locale Data Markup Language http://unicode.org/reports/tr35/
[SRX] Segmentation Rules eXchange http://www.gala-global.org/oscarStandards/srx/
XLIFF is a bilingual document format designed for containing text that needs translation, its corresponding translation and auxiliary data that makes the translation proccess possible.
At creation time, an XLIFF file may contain only text in source language. Translations expressed in target language may be added at a later time.
The root element of an XLIFF document is <xliff>. It contains a
collection of <file> elements. Each <file> element contains a set
of <unit> elements that contain
the text to be translated in the <source> child of one or
more <segment> elements.
Translations are stored in the <target> child of each
<segment> element.
A tool processing a valid XLIFF document that contains XLIFF-defined elements that it cannot handle must preserve those elements.
A tool processing a valid XLIFF document that contains custom elements that it cannot handle should preserve those elements.
This section contains a description of all elements used in XLIFF 2.0.
Legend:
| 1 = one |
| + = one or more |
| ? = zero or one |
| * = zero, one or more |
<xliff>1 | +---<file>+ | +---<skeleton>? | +---<gls:glossary>? | +---<mda:metadata>? | +---<res:resourceData>* | +---<slr:profile>? | +---<val:validation>? | +---<any> * | +--- At least one of (<group>* or<unit>*) | +---<group>* | | | +--- At least one of (<group>* or<unit>*) | | | +---<mda:metadata>? | +---<val:validation>? | | | +---<any> * | +---<unit>* | +---<segment>+ | | | +---<source>1 | | | +---<target>? | | | +---<notes>? | | | | | +---<note>+ | | | +---<mtc:matches>? | | | +---<mda:metadata>? | | | +---<ctr:changeTrack>? | | | +---<val:validation>? | +---<ignorable>* | | | +---<source>1 | | | +---<target>? | | | +---<mda:metadata>? | +---<notes>? | | | +---<note>+ | +---<originalData>? | | | +---<data>+ | +---<mtc:matches>? | +---<gls:glossary>? | +---<mda:metadata>? | +---<ctr:changeTrack>? | +---<val:validation>? | +---<any> *
The structural elements used in XLIFF 2.0 are:
<xliff>,
<file>,
<skeleton>,
<group>,
<unit>,
<segment>,
<ignorable>,
<notes>,
<note>,
<originalData>,
<data>,
<source>
and <target>.
Root element for XLIFF documents.
Contains:
- One or more <file>
elements |
Attributes:
- version, required |
- srcLang, required |
- tgtLang, optional |
| - attributes from any namespace, optional |
Processing Requirements
The
tgtLangattribute must be present when the XLIFF document contains<target>elements that are children of<segment>or<ignorable>.
Container for localization material extracted from a single document/source.
Contains:
- Zero or one <skeleton> element
followed by |
- Zero or one <gls:glossary>
element followed by |
- Zero or one <mda:metadata>
elements followed by |
- Zero or one <slr:profiles>
elements followed by |
- Zero or one <slr:data>
elements followed by |
- Zero, one or more <res:resourceData> elements
followed by |
- Zero or one <validation:validation>
elements followed by |
| - Zero, one or more elements from any namespace followed by |
- One or more <unit> or <group> elements in any order. |
Attributes:
- id, optional |
- original, optional |
- srcDir, optional |
- trgDir, optional |
- fs:fs, optional |
- fs:subFs, optional |
- slr:storageRestriction, optional |
- slr:sizeRestriction, optional |
- slr:sizeInfo, optional |
- slr:sizeInfoRef, optional |
| - attributes from any namespace, optional |
Container for untranslatable material pertaining to the parent
<file> element.
Contains:
Either
| - Untranslatable text |
| - XML elements from any namespace |
or
| - is empty. |
Attributes:
- href, optional |
Processing Requirements
Tools procesing an XLIFF file that contains
<skeleton>elements must keep those elements unchanged.Tools creating an XLIFF file that contains
<skeleton>elements must leave the<skeleton>element empty if and only if the attributehrefis used.
Provides a way to organize units into a structured hierarchy.
Contains:
- One or more
<unit>
or <group>
elements in any order followed by |
- Zero or one <mda:metadata>
elements followed by |
- Zero or one <slr:data>
elements followed by |
- Zero or one <validation:validation>
elements followed by |
| - Zero, one or more elements from any namespace. |
Attributes:
- id, optional |
- name, optional |
- srcDir, optional |
- trgDir, optional |
- fs:fs, optional |
- fs:subFs, optional |
- slr:storageRestriction, optional |
- slr:sizeRestriction, optional |
- slr:sizeInfo, optional |
- slr:sizeInfoRef, optional |
| - attributes from any namespace, optional |
Extracted translatable text.
Contains:
- One or more
<segment>
or <ignorable>
elements in any order followed by |
- Zero or one
<notes>
element followed by |
- Zero or one
<originalData>
element followed by |
- Zero or one
<mtc:matches>
element followed by |
- Zero or one
<gls:glossary>
element followed by |
- Zero or one <mda:metadata>
elements followed by |
- Zero or one <slr:data>
elements followed by |
- Zero or one <validation:validation>
elements followed by |
| - Zero, one or more elements from any namespace. |
Attributes:
- id, required |
- name, optional |
- translate, optional |
- srcDir, optional |
- trgDir, optional |
- fs:fs, optional |
- fs:subFs, optional |
- slr:storageRestriction, optional |
- slr:sizeRestriction, optional |
- slr:sizeInfo, optional |
- slr:sizeInfoRef, optional |
| - attributes from any namespace, optional |
Minimum portion of translatable text.
Contains:
- One <source> element followed
by |
- Zero or one <target> element followed
by |
- Zero or one <notes> elements followed
by |
- Zero or one <mtc:matches> element
followed by |
- Zero or one <ctr:changeTrack> elements followed
by |
- Zero or one <validation:validation> elements followed by |
- Zero or one <mda:metadata>
elements. |
Attributes:
- id, optional |
- translate, optional |
- approved, optional |
- state, optional |
- subState, optional |
| - attributes from any namespace, optional |
- fs:fs,
optional |
- fs:subFs, optional |
Processing Requirements
The value of the optional
idattribute must be unique among all<segment>and<ignorable>children of the enclosing<unit>element.
Information that needs to be preserved but does not need to be modified/translated.
Contains:
- One <source> element
followed by |
- Zero or one <target>
element followed by |
- Zero or one <mda:metadata>
elements. |
Attributes:
- id, optional |
| - attributes from any namespace, optional |
- fs:fs, optional |
- fs:subFs, optional |
Processing Requirements
The value of the optional
idattribute must be unique among all<segment>and<ignorable>children of the enclosing<unit>element.
Collection of comments.
Contains:
- One or more <note>
elements |
Attributes:
- fs:fs, optional |
- fs:subFs, optional |
A comment that contains information about
<source>,
<target>,
<segment> or
<unit> elements.
Contains:
| - Text |
Attributes:
- id, optional |
- appliestTo, optional |
- category, optional |
- priority, optional |
| - attributes from any namespace, optional |
- fs:fs, optional |
- fs:subFs, optional |
Unit-level collection of original data for the inline codes.
Contains:
- One or more <data> elements |
Attributes:
- fs:fs,
optional |
- fs:subFs, optional |
Storage for the original data of an inline code.
Contains:
| - Untranslatable text |
- Zero, one or more <cp> elements. |
Untranslatable text and <cp> elements may appear in any
order.
Attributes:
- id, required |
- dir, optional |
- fs:fs,
optional |
- fs:subFs, optional |
Processing Requirements
The value of the
idattribute must be unique among all<data>children of the enclosing<originalData>element.
Portion of text to be translated.
Contains:
| - Text |
- Zero, one or more <cp> elements |
- Zero, one or more <ph> elements |
- Zero, one or more <pc> elements |
- Zero, one or more <sc> elements |
- Zero, one or more <ec> elements |
- Zero, one or more <mrk> elements |
- Zero, one or more <sm> elements |
- Zero, one or more <em> elements |
Text and inline elements may appear in any order.
Attributes:
- xml:lang, optional |
- xml:space, optional |
- dir, optional |
| - attributes from any namespace, optional |
- fs:fs, optional |
- fs:subFs, optional |
The translation of the sibling <source> element.
Contains:
| - Text |
- Zero, one or more <cp> elements |
- Zero, one or more <ph> elements |
- Zero, one or more <pc> elements |
- Zero, one or more <sc> elements |
- Zero, one or more <ec> elements |
- Zero, one or more <mrk> elements |
- Zero, one or more <sm> elements |
- Zero, one or more <em> elements |
Text and inline elements may appear in any order.
Attributes:
- xml:lang, optional |
- xml:space, optional |
- dir, optional |
- fs:fs,
optional |
- fs:subFs, optional |
| - attributes from any namespace, optional |
Processing Requirements
When a
<target>element is a child of<segment>or<ignorable>and the optionalxml:langattribute is present, its value must be equal to the value of thetgtLangattribute of the enclosing<xliff>element.When a
<target>child is added to a<segment>element, the value of itsxml:spaceattribute must be set topreserveif thexml:spaceattribute of the sibling<source>element is set topreserve.
The inline elements at the <source> or <target> level are: <cp>,
<ph>, <pc>,
<sc>, <ec>,
<mrk>, <sm>
and <em>.
The elements at the <unit> level directly related
to inline elements are: <originalData> and
<data>.
Represents a Unicode character that is invalid in XML.
Contains:
| This element is always empty. |
Parents:
<data>, <mrk>,
<source>, <target> and <pc> |
Attributes:
- hex, required |
- fs:fs,
optional |
- fs:subFs, optional |
Example:
<unit id="1"> <segment> <source>Ctrl+C=<cp hex="0003"/></source> </segment> </unit>
The example above shows a character U+0003 (Control C) as it must be represented in XLIFF.
Represents a standalone code of the original format.
Contains:
| This element is always empty. |
Parents:
<source>, <target>, <pc> and
<mrk> |
Attributes:
- canCopy, optional |
- canDelete, optional |
- canReorder, optional |
- copyOf, optional |
- disp, optional |
- equiv, optional |
- id, required. |
- dataRef, optional |
- subFlows, optional |
- subType, optional |
- type, optional |
- fs:fs,
optional |
- fs:subFs, optional |
- slr:equivStorage, optional |
- slr:sizeInfo, optional |
- slr:sizeInfoRef, optional |
Example:
<unit id="1"> <segment> <source>Number of entries: <ph id="1" dataRef="d1" /> <ph id="2" dataRef="d2"/>(These entries are only the ones matching the current filter settings)</source> </segment> <originalData> <data id="d1">%d</data> <data id="d2"><br/></data> </originalData> </unit>
Represents a well-formed spanning original code.
Contains:
| - Text |
- Zero, one or more <cp> elements |
- Zero, one or more <ph> elements |
- Zero, one or more <pc> elements |
- Zero, one or more <sc> elements |
- Zero, one or more <ec> elements |
- Zero, one or more <mrk> elements |
- Zero, one or more <sm> elements |
- Zero, one or more <em> elements |
Text and inline elements may appear in any order.
Parents:
<source>, <target>, <pc> and <mrk> |
Attributes:
- canCopy, optional |
- canDelete, optional |
- canOverlap, optional |
- canReorder, optional |
- copyOf, optional |
- dispEnd, optional |
- dispStart, optional |
- equivEnd, optional |
- equivStart, optional |
- id, required |
- dataRefEnd, optional |
- dataRefStart, optional |
- subFlowsEnd,
optional |
- subFlowsStart,
optional |
- subType, optional |
- type, optional |
- dir, optional |
- fs:fs,
optional |
- fs:subFs, optional |
- slr:storageRestriction, optional |
- slr:sizeRestriction, optional |
- slr:equivStorage, optional |
- slr:sizeInfo, optional |
- slr:sizeInfoRef, optional |
Example:
<unit id="1"> <segment><pc id="1" dataRefStart="1" dataRefEnd="2">Important</pc> text</source> </segment> <originalData> <data><B></data> <data></B></data> </originalData> </unit>
Processing Requirements
The
<pc>should not be used to represent standalone codes. Using a spanning code for standalone code may result in having text inside a span where the original format does not allow it.
Start marker of a spanning original code.
Contains:
| This element is always empty. |
Parents:
<source>, <target>, <pc> and
<mrk> |
Attributes:
- canCopy, optional |
- canDelete, optional |
- canOverlap, optional |
- canReorder, optional |
- copyOf, optional |
- disp, optional |
- equiv, optional |
- id, required |
- isolated, optional |
- dataRef, optional |
- subFlows, optional |
- subType, optional |
- type, optional |
- dir, optional |
- fs:fs,
optional |
- fs:subFs, optional |
- slr:storageRestriction, optional |
- slr:sizeRestriction, optional |
- slr:equivStorage, optional |
- slr:sizeInfo, optional |
- slr:sizeInfoRef, optional |
Example:
<unit id="1"> <segment> <source><sc id="1" type="fmt" subType="xlf:b"/>First sentence. </source> </segment> <segment> <source>Second sentence.<ec startRef="1" type="fmt" subType="xlf:b"/></source> </segment> </unit>
Processing Requirements
The values of the attributes
canCopy,canDelete,canReorderandcanOverlapmust be the same as the values the ones in the<ec>element corresponding to this start marker.The attribute
isolatedmust be set toyeswhen the<ec>element corresponding to this start marker is not in the same<unit>, and set tonootherwise.The
<sc>/<ec>pair should not be used to represent standalone codes. Using a spanning code for standalone code may result in having text inside a span where the original format does not allow it.
End marker of a spanning original code.
Contains:
| This element is always empty. |
Parents:
<source>, <target>, <pc> and
<mrk> |
Attributes:
- canCopy, optional |
- canDelete, optional |
- canOverlap, optional |
- canReorder, optional |
- copyOf, optional |
- disp, optional |
- equiv, optional |
- id, optional |
- isolated, optional |
- dataRef, optional |
- startRef, optional |
- subFlows, optional |
- subType, optional |
- type, optional |
- fs:fs,
optional |
- fs:subFs, optional |
- slr:equivStorage, optional |
- slr:sizeInfo, optional |
- slr:sizeInfoRef, optional |
Example:
<unit id="1"> <segment> <source>Text in <sc id="1" dataRef="d1"/>bold <sc id="2" dataRef="d2"/> and<ec startRef="1" dataRef="d3"/> italics<ec startRef="2" dataRef="d4"/>.</source> </segment> <originalData> <data id="d1">\b </data> <data id="d2">\i </data> <data id="d3">\b0 </data> <data id="d4">\i0 </data> </originalData> </unit>
Processing Requirements
The values of the attributes
canCopy,canDelete,canReorderandcanOverlapmust be the same as the values the ones in the<sc>element corresponding to this end marker.The attribute
isolatedmust be set toyeswhen the<sc>element corresponding to this end marker is not in the same<unit>and set tonootherwise.When the attribute
isolatedis set toyes, the attributeidmust be used instead of the attributestartRef.The
<sc>/<ec>pair should not be used to represent standalone codes. Using a spanning code for standalone code may result in having text inside a span where the original format does not allow it.
Represents an annotation.
Contains:
| - Text |
- Zero, one or more <cp> elements |
- Zero, one or more <ph> elements |
- Zero, one or more <pc> elements |
- Zero, one or more <sc> elements |
- Zero, one or more <ec> elements |
- Zero, one or more <mrk> elements |
- Zero, one or more <sm> elements |
- Zero, one or more <em> elements |
Text and inline elements may appear in any order.
Parents:
<source>, <target>, <pc> and
<mrk> |
Attributes:
- id, required |
- translate, optional |
- type, optional |
- ref, optional |
- value, optional |
- fs:fs,
optional |
- fs:subFs, optional |
- slr:storageRestriction, optional |
- slr:sizeRestriction, optional |
| - attributes from any namespace, optional |
See the Annotations section for more details and
examples on how to use the <mrk> element.
Start marker of an annotation.
Contains:
| This element is always empty. |
Parents:
<source>, <target>, <pc> and
<mrk> |
Attributes:
- id, required |
- translate, optional |
- type, optional |
- ref, optional |
- value, optional |
- fs:fs,
optional |
- fs:subFs, optional |
- slr:storageRestriction, optional |
- slr:sizeRestriction, optional |
| - attributes from any namespace, optional |
See the Annotations section for more details and
examples on how to use the <sm> element.
This section lists all the various attributes used in XLIFF core elements.
The attributes defined in XLIFF 2.0 are: appliesTo, approved, canCopy, canDelete, canOverlap, canReorder, category, copyOf, name, dataRef, dataRefEnd, dataRefStart, dir, disp, dispEnd, dispStart, equiv, equivEnd, equivStart, hex, href, id, isolated, original, priority, ref, startRef, skeleton, srcDir, srcLang, subFlows, subFlowsEnd, subFlowsStart, subType, subState, state, tgtLang, translate, trgDir, type, value and version.
Approved - Indicates whether the holding
<segment>
element contains a translation suitable to be used when converting the XLIFF file to original format.
Value description: yes or no.
Default value: no
Used in: <segment>.
Comment target - Indicates the element to whom the content of the note applies.
Value description: source or target.
Default value: undefined.
Used in: <note>.
Replication editing hint - Indicates whether or not the inline code can be copied.
Value description: yes if the code can be copied, no if the code should not be copied.
Default value: yes.
Deletion editing hint - Indicates whether or not the inline code can be deleted.
Value description: yes if the code can be deleted, no if the code should not be deleted.
Default value: yes.
Code can overlap - Indicates that the spanning code where this attribute is used may enclose partial spanning codes (i.e. a start marker without its corresponding end marker, or a end marker without its corresponding start marker).
Value description: yes or
no.
Default value: the default value for this attribute depends on the element in which it is used:
Example:
<unit id="1">
<segment>
<source><pc id="1" dataRefStart="3" dataRefEnd="4" canOverlap="no"/>Bold,
<sc id="2" dataRef="1" canOverlap="yes"/>both</pc>,
italics<ec startRef="2" dataRef="2"/></source>
</segment>
<originalData>
<data id="1">\i1 </data>
<data id="2">\i0 </data>
<data id="3">{\b </data>
<data id="4">}</data>
</originalData>
</unit>Re-ordering editing hint - Indicates whether or not the inline code can be re-ordered. See Editing Hints section for more details.
Value description: yes if the code
can be re-ordered, no if the code should not be
re-ordered.
Default value: yes.
Category - Provides a way to categorize notes.
Value description: Text.
Default value: undefined
Used in: <note>.
Reference to base code - Holds the id of the base code of a copied
code.
Value description: NMTOKEN. The id value of the base
code of which this code is a copy.
Default value: undefined
Used in: <ph>, <pc>, <sc>, <ec>.
Example:
<unit id="1"> <segment> <source>Äter <pc id="1">katter möss</pc>?</source> <target>Do <pc id="1">cats</pc> eat <pc id="2" copyOf="1">mice</pc>?</target> </segment> </unit>
Indicates the directionality of a content.
Value description: ltr
(Left-To-Right) or rtl (Right-To-Left)
Default value: default values for this attribute depend on the element in which it is used:
When used in
<source>:The value of the
srcDirattribute of the<unit>element in which the unit is located.When used in
<target>:The value of the
trgDirattribute of the<unit>element in which the unit is located.The value of the
dirattribute of the<source>or<target>element in which the element is located.When used in
<data>:The value
ltr.
Display text - Holds an alternative user-friendly display representation of the original data of the inline code.
Value description: Text
Default value: undefined
Example:
<unit id="1">
<segment>
<source>Welcome back <ph id="1" disp="[UserName]" dataRef="d1"/>!</source>
</segment>
<originalData>
<data id="d1">{1}</data>
</originalData>
</unit>Note
To provide a plain text equivalent of the code, use the equiv
attribute.
Display text - Holds an alternative user-friendly display representation of the original data of the end marker of an inline code.
Value description: Text
Default value: undefined
Used in: <pc>.
Example:
<unit id="1"> <segment> <source>Example of <pc id="1" dataRefStart="d1" dataRefEnd="d2" dispStart="<span>" dispEnd="</span>">formatted text</pc>.</source> </segment> <originalData> <data id="d1">\cf1\ul\b\f1\fs24 </data> <data id="d2">\cf0\ulnone\b0\f0\fs22 </data> </originalData> </unit>
In the example above, the dispStart and dispEnd
attributes provide a more user-friendly representation of the original
formatting codes.
Note
To provide a plain text equivalent of the code, use the equivEnd attribute.
Display text - Holds an alternative user-friendly display representation of the original data of the start marker of an inline code.
Value description: Text
Default value: undefined
Used in: <pc>.
Example:
<unit id="1"> <segment> <source>Example of <pc id="1" dataRefStart="d1" dataRefEnd="d2" dispStart="<span>" dispEnd="</span>">formatted text</pc>.</source> </segment> <originalData> <data id="d1">\cf1\ul\b\f1\fs24 </data> <data id="d2">\cf0\ulnone\b0\f0\fs22 </data> </originalData> </unit>
In the example above, the dispStart and dispEnd
attributes provide a more user-friendly representation of the original
formatting codes.
Note
To provide a plain text equivalent of the code, use the equivStart attribute.
Equivalent text - Holds a plain text representation of the original data of the inline code that may be used when generating a plain text representation of the content.
Value description: Text
Default value: an empty string.
Example:
<unit id="1"> <segment> <source>Open <ph id="1" equiv="" dataRef="d1"/>File</source> </segment> <originalData> <data id="d1">&</data> </originalData> </unit>
In this example the equiv attribute of the <ph> element is used to indicate
that the original data of the code can be ignored in the text representation
of the string. This could, for instance, help a spell-checker tool to
process the content as "Open File".
Note
To provide a user-friendly representation, use the disp
attribute.
Equivalent text - Holds a plain text representation of the original data of the end marker of an inline code that may be used when generating a plain text representation of the content.
Value description: Text
Default value: an empty string
Used in: <pc>.
Example:
<unit id="1">
<segment>
<source>The jam made of <pc id="1" dataRefStart="d1" equivStart=""
dataRefEnd="d2" equivEnd="">lingonberries</pc> is quite tasty.</source>
</segment>
<originalData>
<data id="d1"><span class="link" onclick="linkTo('dbId5345')"></data>
<data id="d2"></span></data>
</originalData>
</unit>Note
To provide a user-friendly representation, use the dispEnd
attribute.
Equivalent text - Holds a plain text representation of the original data of the start marker of an inline code that may be used when generating a plain text representation of the content.
Value description: Text
Default value: an empty string
Used in: <pc>.
Example:
<unit id="1">
<segment>
<source>The jam made of <pc id="1" dataRefStart="d1" equivStart=""
dataRefEnd="d2" equivEnd="">lingonberries</pc> is quite tasty.</source>
</segment>
<originalData>
<data id="d1"><span class="link" onclick="linkTo('dbId5345')"></data>
<data id="d2"></span></data>
</originalData>
</unit>Note
To provide a user-friendly representation, use the dispStart attribute.
Hexadecimal code point - Holds the value of a Unicode code point that is invalid in XML.
Value description: A canonical representation of the hexBinary XSD data type: Two hexadecimal digits to represent each octet of the Unicode code point. The allowed values are any of the values representing code points invalid in XML, between hexadecimal 0000 and 10FFFF (both included).
Default value: undefined
Used in: <cp>.
Example:
<cp hex="001A"/><cp hex="0003"/>
The example above shows a character U+001A and a character U+0003 as they should be represented in XLIFF.
href - a pointer to the location of an external skeleton file pertaining to the
enclosing <file> element..
Value description: IRI.
Default value: undefined
Used in: <skeleton>.
Identifier - A character string used to identify an element.
Value description: NMTOKEN. The scope of the values for this attribute depend on the element in which it is used
When used in
<unit>:The value must be unique within the
<file>element.When used in
<segment>or<ignorable>:The value must be unique within the
<unit>element.When used in
<data>:The value must be unique within the
<originalData>element.When used in
<mrk>,<sm>,<pc>,<sc>,<ec>or<ph>:The value must be unique within the
<segment>or<ignorable>elements and inline elements with the same id in both source and target must be corresponding elements.
Default value: undefined
Used in: <file>, <unit>, <segment>, <ignorable>, <match>, <data>, <sc>, <ec>, <ph>, <pc>, <mrk> and <sm>.
Orphan code flag - Indicates if the start or end marker of a spanning
inline code is not in the same <unit> as its corresponding end
or start marker.
Value description: yes if this start
or end marker is not in the same <unit> as its corresponding end
or start marker, no if both markers are in the same <unit>.
Default value: no
Example:
<unit id="1">
<segment>
<source><pc id="1">Warning: File not found.</pc></source>
</segment>
<mtc:matches>
<mtc:match>
<segment>
<source><sc id="1" isolated="yes"/>Warning:</source>
<target><sc id="1" isolated="yes"/>Attention :</target>
</segment>
</mtc:match>
</match>
</unit>In the example above the <sc> elements have their isolated
attribute set to yes because they do not have their
corresponding <ec> elements.
Resource Name - The original identifier of the resource corresponding to the extracted
<unit> or <group>. For
example: the key in the key/value pair in a Java properties file, the ID of a string in a
Windows string table, the index value of an entry in a database table, etc.
Value description: text string.
Default value: undefined.
Original data reference - Holds the identifier of the <data> element that contains the
original data for a given inline code.
Value description: An XSD NMTOKEN that
must be the value of the id attribute of
one of the <data> element listed in the
same <unit> element.
Default value: undefined.
Example:
<unit id="1">
<segment>
<source>Error in '<ph id="1" dataRef="d1"/>'.</source>
<target>Erreur dans '<ph id="1" dataRef="d1"/>'.</target>
</segment>
<originalData>
<data id="d1">{0}</data>
</originalData>
</unit>The example above shows a <ph> element that has its original
data stored outside the content, in a <data> element.
Original data reference - Holds the identifier of the <data> element that contains the
original data for the end marker of a given inline code.
Value description: An XSD NMTOKEN that must be
the value of the id attribute of one of the <data> element listed in the
same <unit> element.
Default value: undefined.
Used in: <pc>.
Example:
<unit id="1"> <segment> <source><pc id="1" dataRefStart="d1" dataRefEnd="d2">Efficiency<pc> is the operative word here.</source> <target><pc id="1" dataRefStart="d1" dataRefEnd="d2">Efficacité<pc> est le mot clé ici.</target> </segment> <originalData> <data id="d1"><EM></data> <data id="d2"></EM></data> </originalData> </unit>
The example above shows two <pc> elements with their original
data stored outside the content, in two <data> elements.
Original data reference - Holds the identifier of the <data> element that contains the
original data for the start marker of a given inline code.
Value description: An XSD NMTOKEN that must be
the value of the id attribute of one of the <data> element listed in the
same <unit> element.
Default value: undefined.
Used in: <pc>.
Example:
<unit id="1"> <segment> <source><pc id="1" dataRefStart="d1" dataRefEnd="d2">Efficiency<pc> is the operative word here.</source> <target><pc id="1" dataRefStart="d1" dataRefEnd="d2">Efficacité<pc> est le mot clé ici.</target> </segment> <originalData> <data id="d1"><EM></data> <data id="d2"></EM></data> </originalData> </unit>
The example above shows two <pc> elements with their original
data stored outside the content, in two <data> elements.
Original File - A pointer to the location of the original document from which the content
of the enclosing <file> element is extracted.
Value description: Text.
Default value: undefined
Used in: <file>.
Priority - Provides a way to prioritize notes.
Value description: Integer 1-10.
Default value: 1
Used in: <note>.
Note
Please note that 1 is the highest priority that can be interpeted as an alert, e.g. an ITS Localization Note of the type alert. The best parctice is to use only one alert per an anotated element, and the full scale of 2-10 can be used for prioritizing notes of lesser importance than the alert.
Reference - Holds a reference for the associated annotation.
Value description: A value of the XSD type anyURI. The semantics of the value depends on the type of annotation:
When used in a term annotation, the value is referring to the resource providing information about the term.
When used in a comment annotation, the value is referring to a
<note>element.When used in a custom annotation, the value is defined by each custom annotation.
Default value: undefined
Example:
<unit id="1"> <segment> <source>The <pc id="1">ref</pc> attribute of a term annotation holds a <mrk id="m1" type="term" ref="http://dbpedia.org/page/Uniform_Resource_Identifier">URI</mrk> pointing to more information about the given term.</source> </segment> </unit>
Start marker reference - The id of the <sc> element or the <sm> element a given <ec> element or <em> element corresponds.
Value description: NMTOKEN.
Default value: undefined
Example:
<unit id="1"> <segment> <source><sc id="1"/>Bold, <sc id="2"/>both<ec startRef="1"/>, italics<ec startRef="2"/></source> </segment> </unit>
skeleton attribute - a pointer to the location of the file that contains untranslatable data
for the enclosing <file> element.
Value description: IRI.
Default value: undefined
Used in: <file>.
Indicates the directionality of the source content.
Value description: ltr
(Left-To-Right) or rtl (Right-To-Left)
Default value: default values for this attribute depend on the element in which it is used:
Source Language - The code of the language in which the text to be translated is expressed.
Value description: A language code as described in [BCP 47].
Default value: undefined
Used in: <xliff>.
Sub-flows list - Holds a list of id attributes corresponding to the
<unit> elements that contain the
sub-flows for a given inline code.
Value description: A list of NMTOKEN values
separated by spaces. Each value corresponds to the id attribute of a <unit> element.
Default value: undefined
Example:
See the example in the Sub-Flows section.
Sub-flows list - Holds a list of id attributes corresponding to the
<unit> elements that contain the
sub-flows for the end marker of a given inline code.
Value description: A list of NMTOKEN values
separated by spaces. Each value corresponds to the id attribute of a <unit> element.
Default value: undefined
Used in: <pc>.
Example:
See the example in the Sub-Flows section.
Sub-flows list - Holds a list of id attributes corresponding to the
<unit> elements that contain the
sub-flows for the start marker of a given inline code.
Value description: A list of NMTOKEN values
separated by spaces. Each value corresponds to the id attribute of a <unit> element.
Default value: undefined
Used in: <pc>.
Example:
See the example in the Sub-Flows section.
subType - Indicates the secondary level type of an inline code.
Value description:
The value is composed of a prefix and a sub-value separated by a
character : (U+003A).
The prefix is a string uniquely identifying a collection of values for a specific authority. The sub-value is any string value defined by an authority.
The prefix xlf is reserved for this specification, and
the following sub-values are defined:
xlf:lb - Line break |
xlf:pb - Page break |
xlf:b - Bold |
xlf:i - Italics |
xlf:u - Underlined |
xlf:var - Variable |
Other prefixes and sub-values may be defined by the users.
Default value: Undefined
subState - indicates a user-defined status for the <segment> element.
Value description:
The value is composed of a prefix and a sub-value separated by a
character : (U+003A).
The prefix is a string uniquely identifying a collection of values for a specific authority. The sub-value is any string value defined by an authority.
The prefix xlf is reserved for this specification.
Other prefixes and sub-values may be defined by the users.
Default value: Undefined
Used in: <segment>
Type - indicates the state of the translation of a segment.
Value description: The value must be set to one of the following values:
initial - indicates the segment is in its initial state. |
translated - indicates the segment has been translated. |
reviewed - indicates the segment has been reviewed. |
final - indicates the segment is finalized and ready to be used. |
One can further specify the state of the translation using the subState attribute.
Default value: initial
Used in: <segment>
Target Language - The code of the language in which the translated text is expressed.
Value description: A language code as described in [BCP 47].
Default value: undefined
Used in: <xliff>.
Translate - Indicates whether or not the source text text of a
<segment>
element should be translated.
Value description: yes or no.
Default value: yes
Indicates the directionality of the target content.
Value description: ltr
(Left-To-Right) or rtl (Right-To-Left)
Default value: default values for this attribute depend on the element in which it is used:
Type - Indicates the type of an element.
Value description: allowed values for this attribute depend on the element in which it is used.
When used in
<pc>,<sc>,<ec>or<ph>:The value must be set to one of the following values:
fmt- Formatting (e.g. a <b> element in HTML)ui- User interface elementquot- Inline quotationlink- Link (e.g. an <a> element in HTML)image- Image or graphicother- Type of element not covered by any of the other top-level types.One can further specify the type of a code using the
subTypeattribute.Default value: Undefined
One of the following values:
generic,comment,term, or a user-defined value that is composed of a prefix and a value separated by a character:(U+003A).Default value:
generic
Value - Holds a value for the associated annotation.
Value description: Text.
When used in a term annotation, the value is a definition of the term.
When used in a comment annotation, the value is the text of the comment.
When used in a custom annotation, the value is defined by each custom annotation.
Default value: undefined
Used in: <mrk>.
XLIFF version - The version attribute is used to specify the format version of the XLIFF document. This corresponds to the version number of the XLIFF specification that is being adhered to.
Value description: Text.
Default value: 2.0
Used in: <xliff>.
The attributes from XML namespace used in XLIFF 2.0 are xml:lang and xml:space.
Language - The xml:lang attribute specifies the language variant of the text of a given element.
For example: xml:lang="fr-FR" indicates the French language as spoken in France.
Value description: A language code as described in [BCP 47].
Default value: undefined
White spaces - The xml:space attribute specifies how white spaces (ASCII spaces, tabs and line-breaks) should be treated.
Value description: default or preserve. The value default signals
that an application's default white-space processing modes are acceptable for this element; the value preserve
indicates the intent that applications preserve all the white space. This declared intent is considered to apply to all elements
within the content of the element where it is specified, unless overridden with another instance of the xml:space attribute.
For more information see the section on xml:space in the XML specification.
Default value: default
CDATA sections (<![CDATA[...]]>) are allowed in
XLIFF content, but on output they may be changed into normal escaped
content.
Note that avoiding CDATA sections is considered a best practice from the internationalization viewpoint [XML I18N BP].
Processing Requirements
Readers must process CDATA sections.
Writers may preserve the original CDATA sections.
XML comments (<!--...--!>) are allowed in XLIFF
content, but they are ignored in the parsed content.
For example:
<source>Text content <!--IMPORTANT-->that is important</source>
and
<source>Text content that is important</source>
are identical after parsing and correspond to the same following parsed content:
Text content that is important
To annotate a section of the content with a comment that is
recognized and preserved by XLIFF user agents, use the <note> element,
or the <mrk>
element.
Processing Requirements
Readers must ignore XML comments. That is the XLIFF parsed content is the same whether or not there is an XML comment in the document.
Writers may preserve XML comments on output.
The XLIFF inline content defines how to encode the content extracted from the original source. The content includes the following types of data:
Text -- Textual content.
Inline codes -- Sequences of content that are not linguistic text, such as formatting codes, variable placeholders, etc.
For example: the element
<b>in HTML, or the placeholder{0}in a Java string.Annotations -- Markers that delimit a span of the content and carry or point to information about the specified content.
For example: a flag indicating that a given section of text is not intended for translation, or an element indicating that a given expression in the text is a term associated with a definition.
There are two elements that contain inline markup in XLIFF: <source> and <target>.
In some cases, data directly associated with inline elements may also
be stored at the <unit> level.
The XLIFF inline markup does not prescribe how to represent normal text, besides that it must be valid XML.
Because the content represented in XLIFF can be extracted from anywhere, including software resources and other material that can contain control characters, XLIFF needs to be able to represent all Unicode code points.
However, XML does not have the capability to represent all Unicode code points, and does not provide any official mechanism to escape the forbidden code points.
To remedy this, the inline markup provides the <cp> element.
The syntax and semantic of <cp> in XLIFF are similar to
the ones of <cp> in the Unicode Locale Data Markup
Language [LDML].
The specification takes into account two types of codes:
Any code (original or added) belongs to one of the two following categories:
- Standalone
A standalone code is a code that corresponds to a single position in the content. An example of such code is the
<br/>element in HTML.- Spanning
A spanning code is a code that encloses a section of the content using a start and an end marker. There are two kinds of spanning codes:
Codes that can overlap, that is: they can enclose a non-closing or a non-opening spanning code. Such codes do not have an XML-like behavior. For example the RTF code
\b1...\b0is a spanning code that is allowed to overlap.Codes that must not overlap, that is: they cannot enclose a partial spanning code and have an XML-like behavior at the same time. An example of such code is the
<emphasis>...</emphasis>element in DocBook.
When the opening or closing marker of a spanning code does not have its corresponding closing or opening marker in the same unit, it is an orphan code.
Spanning codes present a set of challenges in XLIFF:
First, because the code format of the original data extracted to XLIFF does not need to be XML, spanning codes can overlap.
For example, in the following RTF content, the format markers are in a sequence: start bold, start italics, end bold, end italics. This does not translate into a well-formed mapping.
Text in \b bold \i and\b0 italics\i0
Another challenge is the possible effect of segmentation: A spanning code can start in one segment and end in another.
For example, in the following HTML content, the segmentation
splits the text independently of the codes so the starting and ending
tags of the <B>...</B> element end up in
different parts of the <unit> element:
[Sentence <B>one. ][Sentence two.][ ][Sentence</B> three.]
Finally, a third potential cause of complication is that the start
or the end markers of a spanning code can become orphans if their
segment is used outside of its original <unit>.
For example, an entry with bold text can be broken down into two segments:
Segment 1 = "<b>Warning found: " Segment 2 = "The file is read-only</b>"
And later, one of the segments can be re-used outside its original
<unit>, for instance as a
translation candidate:
New segment = "<b>Warning found - see log</b>" Fuzzy match = "<b>Warning found: "
Because of these use cases, the representation of a spanning code cannot always be mapped to a similar spanning element in XLIFF.
When taking into account these issues, the possible use cases and their corresponding XLIFF representations are as follow:
Table 1. Inline code use cases
| Use Case | Example of Representation |
|---|---|
| Standalone code | <ph id='1'/> |
| Well-formed spanning code | <pc
id='1'>text</pc> |
| Start marker of spanning code | <sc id='1'/> |
| End marker of spanning code | <ec startRef='1'/> |
| Orphan start marker of spanning code | <sc id='1'
isolated='yes'/> |
| Orphan end marker of spanning code | <ec id='1'
isolated='yes'/> |
A spanning code must be represented using a <sc> element and a <ec> element if the code is
not well-formed or orphan.
For example, the following RTF content has two spans of formatting:
Text in \b bold \i and\b0 italics\i0
They can only be represented using two pairs of <sc> and <ec> elements:
Text in <sc id="1">\b </sc>bold <sc id="2">\i </sc>and<ec startRef="1">\b0 </ec> italics<ec startRef="2">\i0</ec>
If the spanning code is well-formed it may be represented using
either a single <pc> element or using a pair
of <sc> and a <ec> elements.
For example, the following RTF content has a single span of formatting:
Text in \b bold\b0 .
It can be represented using either notations:
Text in <pc id="1" canOverlap="yes" dataRefStart="c1" dataRefEnd="c2">bold</pc>.
Text in <sc id="1" dataRef="c1"/>bold<ec startRef="1" dataRef="c2"/>.
Processing Requirements
When both the
<pc>and the<sc>/<ec>representations are possible, writers may use either one as long as all the information of the inline code (e.g. original data, sub-flow indicators, etc.) are preserved.When converting representation between a pair of
<sc>and<ec>elements and a<pc>element or vice-versa, the user agents must map their attributes as shown in the following table:Table 2. Mapping between attributes
<pc>attributes<sc>attributes<ec>attributesid id startRef / id type type type dispStart disp dispEnd disp equivStart equiv equivEnd equiv subFlowsStart subFlows subFlowsEnd subFlows dataRefStart dataRef dataRefEnd dataRef isolated isolated canCopy canCopy canCopy canDelete canDelete canDelete canReorder canReorder canReorder copyOf copyOf copyOf canOverlap canOverlap canOverlap dir dir Readers must be able to handle any types of inline code representation.
Most of the time, inline codes correspond to an original construct in the format from which the content was extracted. This is the original data.
XLIFF tries to abstract and normalize as much as possible the extracted content because this allows a better re-use of the material across projects. Some tools require access to the original data in order to create the translated document back into its original format. Others do not.
In this option, the original data of the inline code is not preserved inside the XLIFF document.
The tool that created the initial XLIFF document is responsible for providing a way to re-create the original format properly when merging back the content.
For example, for the following HTML content:
This <B>naked mole rat</B> is <B>pretty ugly</B>.
one possible XLIFF representation is the following:
<unit id="1"> <segment> <source>This <pc id="1">naked mole rat</pc> is <pc id="2">pretty ugly</pc>.</source> <target>Cet <pc id="1">hétérocéphale</pc> est <pc id="2">plutôt laid</pc>.</target> </segment> </unit>
In this option, the original data of the inline code is stored
in a structure that resides outside the content (i.e. outside <source> or <target>) but still
inside the <unit> element.
The structure is an element <originalData>
that contains a list of <data> entries uniquely
identified within the <unit> by an id attribute. In the content, each
inline code using this mechanism includes a dataRef attribute that points to a
<data>
For example, for the following HTML content:
This <B>naked mole rat</B> is <B>pretty ugly</B>.
The following XLIFF representation stores the original data:
<unit id="1"> <segment> <source>This <pc id="1" dataRefStart="d1" dataRefEnd="d2">naked mole rat</pc> is <pc id="2" dataRefStart="d1" dataRefEnd="d2">pretty ugly</pc>.</source> <target>Cet <pc id="1" dataRefStart="d1" dataRefEnd="d2">hétérocéphale</pc> est <pc id="2" dataRefStart="d1" dataRefEnd="d2">plutôt laid</pc>.</target> </segment> <originalData> <data id="d1"><B></data> <data id="d2"></B></data> </originalData> </unit>
Note
This mechanism allows to re-use identical original data by
pointing to the same <data> element.
When processing a content, there are possible cases when new inline codes need to be added.
For example, in the following HTML help content, the text has the name of a button in bold:
Press the <b>Emergency Stop</b> button to interrupt the count-down sequence.
In the translated version, the original label needs to remain in English because the user interface, unlike the help, is not translated. However, for convenience, a translation is also provided and emphasized using another style. That new formatting needs to be added:
Appuyez sur le bouton <b>Emergency Stop</b> (<i>Arrêt d'urgence</i>) pour interrompre le compte à rebours.
Having to split a single formatted span of text into several separate parts during translation, can serve as another example. For instance, the following sentence in Swedish uses bold on the names of two animals:
Äter <b>katter möss</b>?
But the English translation separates the two names and therefore needs to duplicate the bold codes.
Do <b>cats</b> eat <b>mice</b>?
Processing Requirements
There are several ways to add codes:
One way to create a new code is to duplicate an existing one (called the base code).
If the base code is associated with some original data: the new code simply use these data.
For example, the translation in the following unit, the second inline code is a duplicate of the first one:
<unit id="1"> <segment> <source>Äter <pc id="1" dataRefStart="d1" dataRefEnd="d2">katter möss</pc>?</source> <target>Do <pc id="1" dataRefStart="d1" dataRefEnd="d2">cats</pc> eat <pc id="2" dataRefStart="d1" dataRefEnd="d2">mice</pc>?</target> </segment> <originalData> <data id="d1"><b></data> <data id="d2"></b></data> </originalData> </unit>
If the base code has no associated data, the new code must use
the copyOf attribute to indicate
the id of the base code. This allows the merging tool to
know what original data to re-use.
For example, the translation in the following unit, the second inline code is a duplicate of the first one:
<unit id="1"> <segment> <source>Esznek <pc id="1">a magyarok svéd húsgombócot</pc>?</source> <target>Do <pc id="1">Hungarians</pc> eat <pc id="2" copyOf="1">Swedish meatballs</pc>?</target> </segment> </unit>
Another way to add a code is to create it from scratch. For example, this can happen when the translated text requires additional formating.
For example, in the following unit, the UI text needs to stay in English, and is also translated into French as an hint for the reader. The French translation for the UI text is formatted in italics:
<unit id="1"> <segment> <source>Press the <pc id="1" dataRefStart="d1" dataRefEnd="d2">Emergency Stop</pc> button to interrupt the count-down sequence.</source> <target>Appuyez sur le bouton <pc id="1" dataRefStart="d1" dataRefEnd="d2">Emergency Stop</pc> (<pc id="2" dataRefStart="n2" dataRefEnd="n2">Arrêt d'urgence</pc>) pour interrompre le compte à rebours.</target> </segment> <originalData> <data id="d1"><b></data> <data id="d2"></b></data> <data id="n1"><i></data> <data id="n2"></i></data> </originalData> </unit>
Another way to add a code is to convert part of the extracted text into code. In some cases the inline code can be created after extraction, using part of the text content. This can be done, for instance, to get better matches from an existing TM, or better candidates from an MT system.
For example, it can happen that a tool extracting a Java properties file to XLIFF is not sophisticated enough to treat HTML or XML snippets inside the extracted text as inline code:
# text property for the widget 'next' nextText: Click <ui>Next</ui>
Resulting XLIFF content:
<unit id="1"> <segment> <source>Click <ui>Next</ui></source> </segment> </unit>
But another tool, later in the process, can be used to process
the initial XLIFF document and detect additional inline codes. For
instance here the XML elements such as <ui>.
The original data of the new code is the part of the text content that is converted as inline code.
<unit id="1"> <segment> <source>Click <pc id="1" dataRefStart="d1" dataRefEnd="d2">Next</pc></source> </segment> <originalData> <data id="d1"><ui></data> <data id="d2"></ui></data> </originalData> </unit>
Warning
Converting XLIFF text content into original data for inline code might need a tool-specific process as the tool which did the initial extraction could have applied some conversion to the original content to create the XLIFF content (e.g. un-escape special characters).
When processing a content, there are some possible cases when existing inline codes need to be removed.
For an example the translation of a sentence can result in grouping of several formatted parts into a single one. For instance, the following sentence in English uses bold on the names of two animals:
Do <b>cats</b> eat <b>mice</b>?
But the Swedish translation group the two names and therefore needs only a single bolded part.
Äter <b>katter möss</b>?
Processing Requirements
User agents may remove a given inline code only if its
canDeleteattribute is set toyes.When removing a given inline code, the user agents must remove its associated original data, except if the original data is shared with another inline code that remains in the unit. Note that having to delete the original data is unlikely because such original data is likely to be associated to an inline code in the source content.
There are several ways to remove codes:
One way to remove a code is to delete it from the extracted content. For example, in the following unit, the translated text does not use the italics formatting. It is removed from the target content, but the original data are preserved because they are still used in the source content.
<unit id="1">
<segment>
<source>I read <pc id="1" dataRefStart="d1" dataRefEnd="d2">Little
House on the Prairie</pc> to my children.</source>
<target>子供に「大草原の小さな家」を読みました。</target>
</segment>
<originalData>
<data id="d1"><i></data>
<data id="d2"></i></data>
</originalData>
</unit>Another way to remove an inline code is to convert it into text content. This is likely to be a rare use case. It is equivalant to deleting the code, with the addition to place the original data for the given code into the content, as text. This can be done, for example, to get better matches from an existing TM, or better candidates from an MT system.
For instance, the following unit has an inline code corresponding to a variable place-holder. A tool can temporarily treat this variable as text to get better matches from an existing TM.
<unit id="1"> <segment> <source>Cannot find '<ph id="1" dataRef="d1"/>'.</source> </segment> <originalData> <data id="d1">%s</data> </originalData> </unit>
The modified unit would end up like as shown below. Note that because the original data was not associated with other inline code it has been removed from the unit:
<unit id="1"> <segment> <source>Cannot find '%s'.</source> </segment> </unit>
Warning
Converting the original data of an inline code into text content might need a tool-specific process as the tool which did the initial extraction could have applied some conversion to the original content.
XLIFF provides some information about what editing operations are applicable to inline codes:
A code can be deleted: That is, the code element as well as its original data (if any are attached) are removed from the document. This hint is represented with the
canDeleteattribute. The default value isyes: deletion is allowed.For example, the following extracted C string has the code
<ph id='1'/>set to be not deletable because removing the original data (the variable placeholder%s) from the string would result in an error when running the application:A code can be copied: That is, the code is used as a base code for adding another inline code. See Section 2.6.2.4.1, “Duplicating an existing code” for more details. This hint is represented with the
canCopyattribute. The default value isyes: copy is allowed.A code can be re-ordered: That is, a given code can be moved before or after another inline code. This hint is represented with the
canReorderattribute. The default value isyes: re-ordering is allowed.
Note that often those properties are related and appear together. For example, the code in the firt unit shown below is a variable placeholder that has to be preserved and cannot be duplicated, and when several of such variables are present, as in the second unit, they cannot be re-ordered:
<unit id="1"> <segment> <source>Can't open '<ph id="1" dataRef="d1" canCopy="no" canDelete="no"/>'.</source> </segment> <originalData> <data id="d1">%s</data> </originalData> </unit> <unit id="2"> <segment> <source>Number of <ph id="1" dataRef="d1" canCopy="no" canDelete="no" canReorder="no"/>: <ph id="2" dataRef="d2" canCopy="no" canDelete="no" canReorder="no"/>.</source> </segment> <originalData> <data id="d1">%s</data> <data id="d2">%d</data> </originalData> </unit>
See the Target Content Modification section for additional details on editing.
Processing Requirements
Extraction tools should set the
canDelete,canCopyandcanReorderattributes for the codes that need to be treated differently than with the default settings.User agents should not delete inline codes that have their attribute
canDeleteset tono.User agents should not replicate inline codes that have their attribute
canCopyset tono.When the attribute
canReorderis set tono, the attributescanCopyandcanDeletemust also be set tono.
An annotation is an element that associates a section of the content with some metadata information.
Annotation may be created by the tool that generates the initial XLIFF document, or by any other user agent later in the process. For example, after a first tool creates the document, a second tool can annotate the source content with terminological information.
Annotations are represented using the <mrk> element, or the pair of
<sm> and <em> elements.
Processing Requirements
When a user agent removes a
<mrk>element or a pair of<sm>/<em>elements and therefattribute is present, it must check whether or not the URI pointed by therefattribute is within the same<unit>as the removed element. If it is and no other element has a reference to the pointed element, the user agent must remove the pointed element.
There are several pre-defined types of annotation and user agents can also define custom types.
This annotation is used to indicate whether a span of content is translatable or not.
Usage:
For example:
He saw his <mrk id="m1" translate="no">doppelgänger</mrk>.
Note
The translate attribute can
also be used at the same time as another type of annotation. For
example:
He saw his <mrk id="m1" translate="no" type="term">doppelgänger</mrk>.
This annotation is used to mark up a term in the content, and possibly associate information to it.
Usage:
For example:
<unit id="1"> <segment> <source>He is my <mrk id="m1" type="term">doppelgänger</mrk>.</source> <target>Il est mon <mrk id="m1" type="term">alter ego</mrk>.</target> </segment> </unit>
This annotation is used to associate a span of content with a comment.
Usage:
The
idattribute is requiredThe
typeattribute is required and set tocommentIf the
valueattribute is present it contains the text of the comment, otherwise therefattribute must be present and contains the id value (in URI format) of a<note>element that holds the comment.The
translateattribute is optional and set toyesorno
For example, here with the value
The <mrk id="m1" type="comment" value="Possible values: Printer or Stacker"><ph id="1" dataRef="d1"/></mrk> has been enabled.
And here using the ref attribute:
<unit id="1"> <segment> <source>You use your own namespace.</source> <target>Vous pouvez utiliser votre propre <mrk id="m1" type="comment" ref="#n1">namespace</mrk>.</target> <notes> <note id="n1" appliesTo="target">Please check the translation for 'namespace'. On also can use 'espace de nom', but I think most technical manuals use the English term.</note> </notes> </segment> </unit>
The <mrk> element can be used
to implement custom annotations.
A custom annotation must not provide the same functionality as a pre-defined annotation.
Usage:
For example:
One of the earliest surviving works of literature is <mrk id="m1" type="myCorp:isbn" value="978-0-14-44919-8">The Epic of Gilgamesh</mrk>.
Annotations can overlap spanning inline codes or other
annotations. They also can be split by segmentation. Because of this, a
single annotation span can be represented using a pair of <sm> and <em> elements instead of a
single <mrk> element.
For example, one can have the following content:
<unit id="1"> <segment> <source>Sentence A. <mrk id="m1" type="comment" value="Comment for B and C">Sentence B. Sentence C.</mrk></source> </segment> </unit>
After a user agent performs segmentation, the annotation element
<mrk> is changed to a pair of
<sm> and <em> elements:
<unit id="1"> <segment> <source>Sentence A. </source> </segment> <segment> <source><sm id="m1" type="comment" value="Comment for B and C"/>Sentence B. </source> </segment> <segment> <source>Sentence C.<em startRef="m1"/></source> </segment> </unit>
A sub-flow is a section of text embedded inside an inline code, or inside another section of text.
For example, the following HTML content includes two sub-flows: The
first one is the value of the title attribute ("Start
button"), and the second one is the value of the alt
attribute ("Click here to start!"):
Click to start: <img title="Start button" src="btnStart.png" alt="Click here to start!"/>
Another example is the following DITA content where the footnote
"A Palouse horse is the same as an Appaloosa." is defined at
the middle of a sentence:
Palouse horses<fn>A Palouse horse is the same as an Appaloosa.</fn> have spotted coats.
In XLIFF, each sub-flow is stored in its own <unit> element, and the
subFlows
Therefore the HTML content of the example above can be represented like below:
<unit id="1"> <segment> <source>Start button</source> </segment> </unit> <unit id="2"> <segment> <source>Click here to start!</source> </segment> </unit> <unit id="3"> <segment> <source>Click to start: <ph id="1" subFlows="1 2"/></source> </segment> </unit>
Processing Requirements
The extraction tool should store each sub-flow in its own
<unit>element.An inline code containing or delimiting one or more sub-flows must have an attribute
subFlowsthat holds a list of the identifiers of the<unit>elements where the sub-flows are stored.The extraction tool may order the
<unit>elements of the sub-flows and the<unit>element of their parent in any order it sees fit. User agents coming later in the process must keep the<unit>elements in their initial order.
While white spaces can be significant or insignificant in the original format, they are always treated as significant when stored as original data in XLIFF.
Processing Requirements
For the elements
<sc>,<ec>,<ph>and<data>: The white spaces of their content must be preserved in all cases, even if the value forxml:spaceis set or inherited asdefault.For the inline content and all other inline elements: The white spaces must be preserved if the value for
xml:spaceis set topreserve, and they may be preserved if the value is set todefault.
Text directionality in XLIFF content is defined by inheritance. Source and target content can have different directionality.
The initial directionality for both the source and the target
content is defined in the <file> element, using the
optional attributes srcDir for the source and trgDir for the target. The default
value for both attributes is ltr.
The <unit> element has also the
two optional attributes srcDir and trgDir. Their values must be
either ltr or rtl.The default value of the
srcDir is inherited from the value
of the srcDir attribute in the parent
<file> element. The default
value of the trgDir attribute is inherited from
the value of the trgDir attribute in the parent
<file> element.
The <source> element has an
optional attribute dir with a value ltr or
rtl. The default value is inherited from the value of the
<unit> in which the element is
located.
The <target> element has an
optional attribute dir with a value ltr or
rtl. The default value is inherited from the value of the
<unit> in which the element is
located.
The <pc> and <sc> elements have an optional
attribute dir with a value ltr or
rtl. The default value is inherited from the parent <source> or <target> in which the
element is located.
Adding bidirectional information in the text content is done using the Unicode bidirectional control characters.
In addition, the <data> element has an optional
attribute dir with a value ltr or
rtl that is not inherited. The default value is
ltr.
This section defines the rules tools need to follow when working with the target content of a given segment in order to provide interoperability throughout the whole process.
The extraction tool can create the initial target content as it sees fit.
The merging tool is assumed to have the same level of processing and native format knowledge as the extraction tool. Providing an interoperable way to convert native documents into XLIFF with one tool and back to the native format with another tool without the same level of knowledge is outside the scope of this specification.
The user agents modifying the target content of a document between the extraction and the merging tools ensure interoperability by applying specific rules. These rules are separated into two cases: When there is an existing target and when there is no existing target.
When there is no existing target, the processing requirements for a given segment are the following:
Processing Requirements
User agents may leave the segment without a target.
User agents may create a new target as follow:
User agents may add translatable text.
User agents must put all non-removable inline codes in the target.
User agents must preserve the order of all the non-reorderable inline codes.
User agents may put any removable inline code in the target.
User agents may add inline codes.
User agents may add or remove annotations.
User agents may split the segment into two segments.
User agents may join the segment with the following one.
User agents may convert any
<pc>element into a pair of<sc>and<ec>elements.User agents may convert, if it is possible, any pair or
<sc>and<ec>elements into a<pc>element.
When working with a segment with content already in the target, user agents must choose one of the three behaviors described below:
Processing Requirements
User agents may leave the existing target unchanged.
User agents may modify the existing target as follow:
User agents may add or modify translatable text.
User agents must preserve all non-removable inline codes, regardless whether or not they exist in the source.
User agents must preserve any non-reorderable inline codes in the existing target.
User agents must not add any non-reorderable inline codes to the target.
User agents must not split the segment. The reason to not allow splitting of segments with content in the target node is because there is no guarantee that the content in the two nodes are linguistically in the same order, performing that operation would pose a risk to the integrity of the content.
User agents may remove any removable inline codes in the target.
User agents may add inline codes (including copying any cloneable inline codes of the existing target).
User agents may add or remove annotations.
User agents may join the segment with the following segment.
User agents may convert any
<pc>element into a pair of<sc>and<ec>elements.User agents may convert, if it is possible, any pair or
<sc>and<ec>elements into a<pc>element.
User agents may delete the existing target and start over as if working without an existing target.
This specification defines two types of content equality:
Equality type A: Two contents are equals if their normalized forms are equal.
Equality type B: Two contents are equals if, in their normalized forms and with all inline code markers replaced by the value of their
equivattributes, the resulting strings are equal.
A content is normalized when:
The text nodes are in Unicode Normalized Form C defined in the Unicode Annex #15: Unicode Normalization Forms [LDML].
All annotation markers are removed.
All pairs of
<sc>and<ec>elements that can be converted into a<pc>element, are converted.All adjacent text nodes are merged into a single text node.
For all the text nodes with the white space property set to
default, all adjacent white spaces are collapsed into a single space.
XLIFF 2.0 offers two mechanisms for storing custom data in an XLIFF document:
Using the Metadata module for storing custom data in elements defined by the official XLIFF specification.
Using the standard XML namespace mechanism for storing data in elements or attributes defined in a custom XML Schema.
Both mechanisms can be used simultaneously.
The following elements allow storing custom data in
<mda:metadata>
elements or in elements from a custom XML namespace:
- <file> |
- <group> |
- <unit> |
Custom extensions using
<mda:metadata>
are allowed in:
- <segment> |
- <ignorable> |
- <mtc:match> |
The following elements accept custom attributes:
- <file> |
- <group> |
- <unit> |
- <segment> |
- <ignorable> |
- <source> |
- <target> |
- <note> |
- <mrk> |
- <sm> |
A user extension, whether implemented using
<mda:metadata>or using a custom namespace, must not provide the same functionality as an existing XLIFF core or module feature, however it may complement an extensible XLIFF core feature or module feature or provide a new funtionality at provided extensin points.Tools must not rely on user extensions (either in the Metadata module or custim namespace based) other than the ones possibly defined in
<skeleton>to create the translated version of the original document.User agents that do not support a given custom namespace based user extension should preserve that extension without modifications, except if the element where the extension is located is removed.
In the context of XLIFF, a segment is a content which is either a unit of extracted text, or has been created from a unit of extracted text by means of a segmentation mechanism such as sentence boundary detection. For example, a segment can be a title, the text of a menu item, a paragraph or a sentence in a paragraph.
In the context of XLIFF, other types representations sometimes called "segmentation" can be represented using annotations. For example: the terms in a segment can be identified and marked up using the term annotation.
XLIFF does not specify how segmentation is carried out, only how to represent its result. The Segmentation Rules eXchange standard [SRX] provides detailed information about segmenting a content.
In XLIFF each segment is represented by a <segment> element.
A <unit> can be made of a single
<segment>.
Each <segment> element has one
<source> element that
contains the source content and one optional <target> element that can be
empty or contain the translation of the source content at a given
state.
Content parts between segments are represented with the <ignorable> element,
which has the same content model as <segment>.
For example:
<unit id="1"> <segment> <source>First sentence.</source> <target>Première phrase.</target> </segment> <ignorable> <source> </source> </ignorable> <segment> <source>Second sentence.</source> </segment> </unit>
Some applications (e.g. aligner tools) may create segmented content where the target segments are not in the same order as the source.
To be able to map order differences, the <target> element has an
optional order attribute that indicates its position in the
sequence of segments (and inter-segments). Its value is an integer from 1
to N, including the parts between segments.
For example, the following HTML documents have the same paragraph with three sentences in different order:
<p lang='en'>Sentence A. Sentence B. Sentence C.</p>
<p lang='fr'>Phrase B. Phrase C. Phrase A.</p>
The XLIFF representation of the content, after segmentation and alignment, would be:
<unit id="1"> <segment id="1"> <source>Sentence A.</source> <target order="5">Phrase A.</target> </segment> <ignorable> <source> </source> </ignorable> <segment id="2"> <source>Sentence B.</source> <target order="1">Phrase B.</target> </segment> <ignorable> <source> </source> </ignorable> <segment id="3"> <source>Sentence C.</source> <target order="3">Phrase C.</target> </segment> </unit>
Segments within the same <unit> may be split, joined or
moved as needed.
When modifying the segmentation, the user agents must make sure the integrity of the relations between segments and associated data (such as candidate translations, comments, etc.) is preserved.
Processing Requirements
When merging, joining, or moving
<segment>or<ignorable>elements, the user agent must update, add or remove theorderattributes of the<target>elements as needed.[[TODO: PRs for how elements and attributes in segment, source, target should behave when re-segmenting.]]
XLIFF is an XML vocabulary, thereafter conformant XLIFF documents must be well formed and valid XML documents.
Conformant XLIFF documents must be valid instances of the official Core XML Schema that is part of this XLIFF specification.
As not all aspects of the XLIFF specification can be expressed in terms of XML Schemas, conformant XLIFF documents must also comply with all requirements indicated in this specification document.
Applications that generate XLIFF documents must generate conformant XLIFF documents to be considered XLIFF compliant.
XLIFF documents may contain custom extensions, as defined in the Extension Mechanisms section. Applications that process conformant XLIFF files that contain custom extensions are not required to understand and process non-XLIFF elements or attributes. However, conformant applications should preserve existing custom extensions when processing conformant XLIFF files, provided that the elements that contain custom extensions are not removed according to XLIFF processing requirements or the extension's own processing requirements.
XLIFF is a format explicitly designed for exchanging data. Thus, a conformant XLIFF application must be able to accept XLIFF files it generated after those XLIFF files have been processed by a different tool, provided that the processed files are conformant XLIFF documents.
Appendix A XML Schemas and Catalog
The grammar of XLIFF 2.0 is defined using eight (8) XML Schemas and one (1) XML catalog. The module schemas are referenced from their respective modules.
Core XML Schema| +---Candidates Module XML Schema| +---Glossary Module XML Schema| +---Metadatata Module XML Schema| +---Resource Data Module XML Schema| +---Change Tracking Module XML Schema| +---Size and Length Restriction Module XML Schema| +---Validation Module XML Schema
The catalog listed below for reading convenience is accessible at http://docs.oasis-open.org/xliff/xliff-core/v2.0/csprd01/schemas/catalog.xml.
<?xml version="1.0" encoding="UTF-8"?>
<catalog xmlns="urn:oasis:names:tc:entity:xmlns:xml:catalog">
<uri name="urn:oasis:names:tc:xliff:document:2.0" uri="xliff_core_2.0.xsd"/>
<uri name="urn:oasis:names:tc:xliff:changetracking:2.0" uri="modules/change_tracking.xsd"/>
<uri name="urn:oasis:names:tc:xliff:glossary:2.0" uri="modules/glossary.xsd"/>
<uri name="urn:oasis:names:tc:xliff:matches:2.0" uri="modules/matches.xsd"/>
<uri name="urn:oasis:names:tc:xliff:metadata:2.0" uri="modules/metadata.xsd"/>
<uri name="urn:oasis:names:tc:xliff:resourcedata:2.0" uri="modules/resource_data.xsd"/>
<uri name="urn:oasis:names:tc:xliff:sizerestriction:2.0" uri="modules/size_restriction.xsd"/>
<uri name="urn:oasis:names:tc:xliff:validation:2.0" uri="modules/validation.xsd"/>
</catalog>
The schema listed below for reading convenience is accessible at http://docs.oasis-open.org/xliff/xliff-core/v2.0/csprd01/schemas/xliff_core_2.0.xsd.
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
elementFormDefault="qualified"
xmlns:xlf="urn:oasis:names:tc:xliff:document:2.0"
xmlns:ctr="urn:oasis:names:tc:xliff:changetracking:2.0"
xmlns:gls="urn:oasis:names:tc:xliff:glossary:2.0"
xmlns:mtc="urn:oasis:names:tc:xliff:matches:2.0"
xmlns:mda="urn:oasis:names:tc:xliff:metadata:2.0"
xmlns:res="urn:oasis:names:tc:xliff:resourcedata:2.0"
xmlns:slr="urn:oasis:names:tc:xliff:sizerestriction:2.0"
xmlns:val="urn:oasis:names:tc:xliff:validation:2.0"
targetNamespace="urn:oasis:names:tc:xliff:document:2.0">
<xs:import namespace="http://www.w3.org/XML/1998/namespace"
schemaLocation="http://www.w3.org/2001/xml.xsd"/>
<xs:import namespace="urn:oasis:names:tc:xliff:changetracking:2.0"
schemaLocation="modules/change_tracking.xsd"/>
<xs:import namespace="urn:oasis:names:tc:xliff:glossary:2.0"
schemaLocation="modules/glossary.xsd"/>
<xs:import namespace="urn:oasis:names:tc:xliff:matches:2.0"
schemaLocation="modules/matches.xsd"/>
<xs:import namespace="urn:oasis:names:tc:xliff:metadata:2.0"
schemaLocation="modules/metadata.xsd"/>
<xs:import namespace="urn:oasis:names:tc:xliff:resourcedata:2.0"
schemaLocation="modules/resource_data.xsd"/>
<xs:import namespace="urn:oasis:names:tc:xliff:sizerestriction:2.0"
schemaLocation="modules/size_restriction.xsd"/>
<xs:import namespace="urn:oasis:names:tc:xliff:validation:2.0"
schemaLocation="modules/validation.xsd"/>
<!-- Attribute definitions -->
<xs:simpleType name="yesNo">
<xs:restriction base="xs:string">
<xs:enumeration value="yes"/>
<xs:enumeration value="no"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="dirValue">
<xs:restriction base="xs:string">
<xs:enumeration value="ltr"/>
<xs:enumeration value="rtl"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="appliesTo">
<xs:restriction base="xs:string">
<xs:enumeration value="source"/>
<xs:enumeration value="target"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="userDefinedValue">
<xs:restriction base="xs:string">
<xs:pattern value="[^\s:]+:[^\s:]+"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="attrType_type">
<xs:restriction base="xs:string">
<xs:pattern value="(fmt|quot|link|image|other)"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="typeForMrkValues">
<xs:restriction base="xs:NMTOKEN">
<xs:enumeration value="generic"/>
<xs:enumeration value="comment"/>
<xs:enumeration value="term"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="attrType_typeForMrk">
<xs:union memberTypes="xlf:typeForMrkValues xlf:userDefinedValue"/>
</xs:simpleType>
<!-- Structural elements -->
<xs:element name="xliff">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="1" maxOccurs="unbounded" ref="xlf:file"/>
</xs:sequence>
<xs:attribute name="version" fixed="2.0" use="required"/>
<xs:attribute name="srcLang" use="required"/>
<xs:attribute name="tgtLang" use="optional"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
</xs:complexType>
</xs:element>
<xs:element name="file">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" maxOccurs="1" ref="xlf:skeleton"/>
<xs:element minOccurs="0" maxOccurs="1" ref="gls:glossary"/>
<xs:element minOccurs="0" maxOccurs="1" ref="mda:metadata"/>
<xs:element minOccurs="0" maxOccurs="1" ref="slr:profiles"/>
<xs:element minOccurs="0" maxOccurs="1" ref="slr:data"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="res:resourceData"/>
<xs:element minOccurs="0" maxOccurs="1" ref="validation:validation"/>
<xs:any maxOccurs="unbounded" minOccurs="0" namespace="##other"
processContents="skip"/>
<xs:choice minOccurs="1" maxOccurs="unbounded">
<xs:element ref="xlf:unit"/>
<xs:element ref="xlf:group"/>
</xs:choice>
</xs:sequence>
<xs:attribute name="id" use="optional" type="xs:NMTOKEN"/>
<xs:attribute name="original" use="optional"/>
<xs:attribute name="srcDir" use="optional" type="xlf:dirValue"
default="ltr"/>
<xs:attribute name="trgDir" use="optional" type="xlf:dirValue"
default="ltr"/>
<xs:attribute ref="fs:fs" use="optional"/>
<xs:attribute ref="fs:subFs" use="optional"/>
<xs:attribute ref="slr:storageRestriction" use="optional"/>
<xs:attribute ref="slr:sizeRestriction" use="optional"/>
<xs:attribute ref="slr:sizeInfo" use="optional"/>
<xs:attribute ref="slr:sizeInfoRef" use="optional"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
</xs:complexType>
</xs:element>
<xs:element name="skeleton">
<xs:complexType mixed="true">
<xs:sequence>
<xs:any maxOccurs="unbounded" minOccurs="0" namespace="##other"
processContents="skip"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="group">
<xs:complexType>
<xs:sequence>
<xs:choice minOccurs="1" maxOccurs="unbounded">
<xs:element ref="xlf:unit"/>
<xs:element ref="xlf:group"/>
</xs:choice>
<xs:element minOccurs="0" maxOccurs="1" ref="mda:metadata"/>
<xs:element minOccurs="0" maxOccurs="1" ref="slr:data"/>
<xs:element minOccurs="0" maxOccurs="1" ref="validation:validation"/>
<xs:any maxOccurs="unbounded" minOccurs="0" namespace="##other"
processContents="skip"/>
</xs:sequence>
<xs:attribute name="id" use="optional" type="xs:NMTOKEN"/>
<xs:attribute name="name" use="optional"/>
<xs:attribute name="srcDir" use="optional" type="xlf:dirValue"/>
<xs:attribute name="trgDir" use="optional" type="xlf:dirValue"/>
<xs:attribute ref="fs:fs" use="optional"/>
<xs:attribute ref="fs:subFs" use="optional"/>
<xs:attribute ref="slr:storageRestriction" use="optional"/>
<xs:attribute ref="slr:sizeRestriction" use="optional"/>
<xs:attribute ref="slr:sizeInfo" use="optional"/>
<xs:attribute ref="slr:sizeInfoRef" use="optional"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
</xs:complexType>
</xs:element>
<xs:element name="unit">
<xs:complexType>
<xs:sequence>
<xs:choice minOccurs="1" maxOccurs="unbounded">
<xs:element ref="xlf:segment"/>
<xs:element ref="xlf:ignorable"/>
</xs:choice>
<xs:element minOccurs="0" maxOccurs="1" ref="xlf:notes"/>
<xs:element minOccurs="0" maxOccurs="1" ref="xlf:originalData"/>
<xs:element minOccurs="0" maxOccurs="1" ref="mtc:matches"/>
<xs:element minOccurs="0" maxOccurs="1" ref="gls:glossary"/>
<xs:element minOccurs="0" maxOccurs="1" ref="mda:metadata"/>
<xs:element minOccurs="0" maxOccurs="1" ref="slr:data"/>
<xs:element minOccurs="0" maxOccurs="1" ref="validation:validation"/>
<xs:any maxOccurs="unbounded" minOccurs="0" namespace="##other"
processContents="skip"/>
</xs:sequence>
<xs:attribute name="id" use="required" type="xs:NMTOKEN"/>
<xs:attribute name="name" use="optional" />
<xs:attribute name="translate" use="optional" type="xlf:yesNo" default="yes"/>
<xs:attribute name="srcDir" use="optional" type="xlf:dirValue"/>
<xs:attribute name="trgDir" use="optional" type="xlf:dirValue"/>
<xs:attribute ref="fs:fs" use="optional"/>
<xs:attribute ref="fs:subFs" use="optional"/>
<xs:attribute ref="slr:storageRestriction" use="optional"/>
<xs:attribute ref="slr:sizeRestriction" use="optional"/>
<xs:attribute ref="slr:sizeInfo" use="optional"/>
<xs:attribute ref="slr:sizeInfoRef" use="optional"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
</xs:complexType>
</xs:element>
<xs:element name="segment">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="1" maxOccurs="1" ref="xlf:source"/>
<xs:element minOccurs="0" maxOccurs="1" ref="xlf:target"/>
<xs:element minOccurs="0" maxOccurs="1" ref="xlf:notes"/>
<xs:element minOccurs="0" maxOccurs="1" ref="mtc:matches"/>
<xs:element minOccurs="0" maxOccurs="1" ref="ctr:changeTrack"/>
<xs:element minOccurs="0" maxOccurs="1" ref="validation:validation"/>
<xs:element minOccurs="0" maxOccurs="1" ref="mda:metadata"/>
</xs:sequence>
<xs:attribute name="id" use="optional" type="xs:NMTOKEN"/>
<xs:attribute name="translate" use="optional" type="xlf:yesNo" default="yes"/>
<xs:attribute name="approved" type="xlf:yesNo" default="no"/>
<xs:attribute name="state" use="optional" default="initial"/>
<xs:attribute name="subState" use="optional"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
<xs:attribute ref="fs:fs" use="optional"/>
<xs:attribute ref="fs:subFs" use="optional"/>
</xs:complexType>
</xs:element>
<xs:element name="ignorable">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="1" maxOccurs="1" ref="xlf:source"/>
<xs:element minOccurs="0" maxOccurs="1" ref="xlf:target"/>
<xs:element minOccurs="0" maxOccurs="1" ref="mda:metadata"/>
</xs:sequence>
<xs:attribute name="id" use="optional" type="xs:NMTOKEN"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
<xs:attribute ref="fs:fs" use="optional"/>
<xs:attribute ref="fs:subFs" use="optional"/>
</xs:complexType>
</xs:element>
<xs:element name="originalData">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="1" maxOccurs="unbounded" ref="xlf:data"/>
</xs:sequence>
<xs:attribute ref="fs:fs" use="optional"/>
<xs:attribute ref="fs:subFs" use="optional"/>
</xs:complexType>
</xs:element>
<xs:element name="data">
<xs:complexType mixed="true">
<xs:sequence>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="xlf:cp"/>
</xs:sequence>
<xs:attribute name="id" use="required" type="xs:NMTOKEN"/>
<xs:attribute name="dir" use="optional" type="xlf:dirValue"/>
<xs:attribute ref="fs:fs" use="optional"/>
<xs:attribute ref="fs:subFs" use="optional"/>
</xs:complexType>
</xs:element>
<xs:element name="notes">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="1" maxOccurs="unbounded" ref="xlf:note"/>
</xs:sequence>
<xs:attribute ref="fs:fs" use="optional"/>
<xs:attribute ref="fs:subFs" use="optional"/>
</xs:complexType>
</xs:element>
<xs:element name="note">
<xs:complexType mixed="true">
<xs:attribute name="id" use="optional" type="xs:NMTOKEN"/>
<xs:attribute name="appliesTo" use="optional" type="xlf:appliesTo"/>
<xs:attribute name="category" use="optional"/>
<xs:attribute name="priority" use="optional"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
<xs:attribute ref="fs:fs" use="optional"/>
<xs:attribute ref="fs:subFs" use="optional"/>
</xs:complexType>
</xs:element>
<xs:element name="source">
<xs:complexType mixed="true">
<xs:group ref="xlf:inline" minOccurs="0" maxOccurs="unbounded"/>
<xs:attribute ref="xml:lang" use="optional"/>
<xs:attribute ref="xml:space" use="optional"/>
<xs:attribute name="dir" use="optional" type="xlf:dirValue"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
<xs:attribute ref="fs:fs" use="optional"/>
<xs:attribute ref="fs:subFs" use="optional"/>
</xs:complexType>
</xs:element>
<xs:element name="target">
<xs:complexType mixed="true">
<xs:group ref="xlf:inline" minOccurs="0" maxOccurs="unbounded"/>
<xs:attribute ref="xml:lang" use="optional"/>
<xs:attribute ref="xml:space" use="optional"/>
<xs:attribute name="dir" use="optional" type="xlf:dirValue"/>
<xs:attribute ref="fs:fs" use="optional"/>
<xs:attribute ref="fs:subFs" use="optional"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
</xs:complexType>
</xs:element>
<!-- Inline elements -->
<xs:group name="inline">
<xs:choice>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="xlf:sc"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="xlf:ec"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="xlf:ph"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="xlf:pc"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="xlf:cp"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="xlf:mrk"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="xlf:sm"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="xlf:em"/>
</xs:choice>
</xs:group>
<xs:element name="sc">
<!-- Start Code -->
<xs:complexType mixed="false">
<xs:attribute name="canCopy" use="optional" type="xlf:yesNo" default="yes"/>
<xs:attribute name="canDelete" use="optional" type="xlf:yesNo" default="yes"/>
<xs:attribute name="canOverlap" use="optional" type="xlf:yesNo"/>
<xs:attribute name="canReorder" use="optional" type="xlf:yesNo" default="yes"/>
<xs:attribute name="copyOf" use="optional" type="xs:NMTOKEN"/>
<xs:attribute name="disp" use="optional"/>
<xs:attribute name="equiv" use="optional"/>
<xs:attribute name="id" use="required" type="xs:NMTOKEN"/>
<xs:attribute name="isolated" use="optional" type="xlf:yesNo" default="no"/>
<xs:attribute name="dataRef" use="optional"/>
<xs:attribute name="subFlows" use="optional" type="xs:NMTOKENS"/>
<xs:attribute name="subType" use="optional" type="xlf:userDefinedValue"/>
<xs:attribute name="type" use="optional" type="xlf:attrType_type"/>
<xs:attribute name="dir" use="optional" type="xlf:dirValue"/>
<xs:attribute ref="fs:fs" use="optional"/>
<xs:attribute ref="fs:subFs" use="optional"/>
<xs:attribute ref="slr:storageRestriction" use="optional"/>
<xs:attribute ref="slr:sizeRestriction" use="optional"/>
<xs:attribute ref="slr:equivStorage" use="optional"/>
<xs:attribute ref="slr:sizeInfo" use="optional"/>
<xs:attribute ref="slr:sizeInfoRef" use="optional"/>
</xs:complexType>
</xs:element>
<xs:element name="ec">
<!-- End Code -->
<xs:complexType mixed="false">
<xs:attribute name="canCopy" use="optional" type="xlf:yesNo" default="yes"/>
<xs:attribute name="canDelete" use="optional" type="xlf:yesNo" default="yes"/>
<xs:attribute name="canOverlap" use="optional" type="xlf:yesNo"/>
<xs:attribute name="canReorder" use="optional" type="xlf:yesNo" default="yes"/>
<xs:attribute name="copyOf" use="optional" type="xs:NMTOKEN"/>
<xs:attribute name="disp" use="optional"/>
<xs:attribute name="equiv" use="optional"/>
<xs:attribute name="id" use="optional" type="xs:NMTOKEN"/>
<xs:attribute name="isolated" use="optional" type="xlf:yesNo" default="no"/>
<xs:attribute name="dataRef" use="optional"/>
<xs:attribute name="startRef" use="optional"/>
<xs:attribute name="subFlows" use="optional" type="xs:NMTOKENS"/>
<xs:attribute name="subType" use="optional" type="xlf:userDefinedValue"/>
<xs:attribute name="type" use="optional" type="xlf:attrType_type"/>
<xs:attribute ref="fs:fs" use="optional"/>
<xs:attribute ref="fs:subFs" use="optional"/>
<xs:attribute ref="slr:equivStorage" use="optional"/>
<xs:attribute ref="slr:sizeInfo" use="optional"/>
<xs:attribute ref="slr:sizeInfoRef" use="optional"/>
</xs:complexType>
</xs:element>
<xs:element name="ph">
<!-- Placeholder -->
<xs:complexType mixed="false">
<xs:attribute name="canCopy" use="optional" type="xlf:yesNo" default="yes"/>
<xs:attribute name="canDelete" use="optional" type="xlf:yesNo" default="yes"/>
<xs:attribute name="canReorder" use="optional" type="xlf:yesNo" default="yes"/>
<xs:attribute name="copyOf" use="optional" type="xs:NMTOKEN"/>
<xs:attribute name="disp" use="optional"/>
<xs:attribute name="equiv" use="optional"/>
<xs:attribute name="id" use="required" type="xs:NMTOKEN"/>
<xs:attribute name="dataRef" use="optional"/>
<xs:attribute name="subFlows" use="optional" type="xs:NMTOKENS"/>
<xs:attribute name="subType" use="optional" type="xlf:userDefinedValue"/>
<xs:attribute name="type" use="optional" type="xlf:attrType_type"/>
<xs:attribute ref="fs:fs" use="optional"/>
<xs:attribute ref="fs:subFs" use="optional"/>
<xs:attribute ref="slr:equivStorage" use="optional"/>
<xs:attribute ref="slr:sizeInfo" use="optional"/>
<xs:attribute ref="slr:sizeInfoRef" use="optional"/>
</xs:complexType>
</xs:element>
<xs:element name="pc">
<!-- Paired Code -->
<xs:complexType mixed="true">
<xs:group ref="xlf:inline" minOccurs="0" maxOccurs="unbounded"/>
<xs:attribute name="canCopy" use="optional" type="xlf:yesNo" default="yes"/>
<xs:attribute name="canDelete" use="optional" type="xlf:yesNo" default="yes"/>
<xs:attribute name="canOverlap" use="optional" type="xlf:yesNo"/>
<xs:attribute name="canReorder" use="optional" type="xlf:yesNo" default="yes"/>
<xs:attribute name="copyOf" use="optional" type="xs:NMTOKEN"/>
<xs:attribute name="dispEnd" use="optional"/>
<xs:attribute name="dispStart" use="optional"/>
<xs:attribute name="equivEnd" use="optional"/>
<xs:attribute name="equivStart" use="optional"/>
<xs:attribute name="id" use="required" type="xs:NMTOKEN"/>
<xs:attribute name="dataRefEnd" use="optional"/>
<xs:attribute name="dataRefStart" use="optional"/>
<xs:attribute name="subFlowsEnd" use="optional" type="xs:NMTOKENS"/>
<xs:attribute name="subFlowsStart" use="optional" type="xs:NMTOKENS"/>
<xs:attribute name="subType" use="optional" type="xlf:userDefinedValue"/>
<xs:attribute name="type" use="optional" type="xlf:attrType_type"/>
<xs:attribute name="dir" use="optional" type="xlf:dirValue"/>
<xs:attribute ref="fs:fs" use="optional"/>
<xs:attribute ref="fs:subFs" use="optional"/>
<xs:attribute ref="slr:storageRestriction" use="optional"/>
<xs:attribute ref="slr:sizeRestriction" use="optional"/>
<xs:attribute ref="slr:equivStorage" use="optional"/>
<xs:attribute ref="slr:sizeInfo" use="optional"/>
<xs:attribute ref="slr:sizeInfoRef" use="optional"/>
</xs:complexType>
</xs:element>
<xs:element name="cp">
<!-- Code Point -->
<xs:complexType mixed="false">
<xs:attribute name="hex" use="required"/>
<xs:attribute ref="fs:fs" use="optional"/>
<xs:attribute ref="fs:subFs" use="optional"/>
</xs:complexType>
</xs:element>
<xs:element name="mrk">
<!-- Annotation Marker -->
<xs:complexType mixed="true">
<xs:group ref="xlf:inline" minOccurs="0" maxOccurs="unbounded"/>
<xs:attribute name="id" use="required" type="xs:NMTOKEN"/>
<xs:attribute name="translate" use="optional" type="xlf:yesNo" default="yes"/>
<xs:attribute name="type" use="optional" type="xlf:attrType_type"/>
<xs:attribute name="ref" use="optional" type="xs:anyURI"/>
<xs:attribute name="value" use="optional"/>
<xs:attribute ref="fs:fs" use="optional"/>
<xs:attribute ref="fs:subFs" use="optional"/>
<xs:attribute ref="slr:storageRestriction" use="optional"/>
<xs:attribute ref="slr:sizeRestriction" use="optional"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
</xs:complexType>
</xs:element>
<xs:element name="sm">
<!-- Start Annotation Marker -->
<xs:complexType mixed="false">
<xs:attribute name="id" use="required" type="xs:NMTOKEN"/>
<xs:attribute name="translate" use="optional" type="xlf:yesNo" default="yes"/>
<xs:attribute name="type" use="optional" type="xlf:attrType_type"/>
<xs:attribute name="ref" use="optional" type="xs:anyURI"/>
<xs:attribute name="value" use="optional"/>
<xs:attribute ref="fs:fs" use="optional"/>
<xs:attribute ref="fs:subFs" use="optional"/>
<xs:attribute ref="slr:storageRestriction" use="optional"/>
<xs:attribute ref="slr:sizeRestriction" use="optional"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
</xs:complexType>
</xs:element>
<xs:element name="em">
<!-- End Annotation Marker -->
<xs:complexType mixed="false">
<xs:attribute name="startRef" use="required"/>
<xs:attribute ref="fs:fs" use="optional"/>
<xs:attribute ref="fs:subFs" use="optional"/>
</xs:complexType>
</xs:element>
</xs:schema>
Appendix B Translation Candidates Module
The source text of a document can be pre-processed against various translation resources (TM, MT, etc.) to provide translation candidates. This module provides an XLIFF capability to store lists of possible translations along with information about the similarity of the match, the quality of the translation, its provenance, etc.
The namespace for the Translation Candidates module is: urn:oasis:names:tc:xliff:matches:2.0
The elements defined in the Translation Candidates module are:
<matches> and
<match>.
Legend:
| 1 = one |
| + = one or more |
| ? = zero or one |
<matches>1 | +---<match>+ | +---<xlf:source>1 | +---<xlf:target>1 | +---<xlf:originalData>? | | | +---<xlf:data>+ | +---<mda:metadata>?
Collection of matches retrieved from any leveraging system (MT, TM, etc.)
Contains:
- One or more <match> elements |
A potential translation suggested for the enclosing
<unit>
or
<segment>
element.
Contains:
- One <source> element
followed by |
- One <target>
element followed by |
- Zero or one <originalData> element followed by |
- Zero or one <mda:metadata> element. |
Attributes:
- id, optional |
- origin, optional |
- similarity, optional |
- matchQuality, optional |
- matchSuitability, optional |
- type, optional |
- reference, optional
|
| - attributes from any namespace, optional |
The attributes defined in the Translation Candidates module are: id, similarity, matchQuality, matchSuitability, origin, type, subtype and reference.
Identifier - A character string used to identify a <match> element.
Value description: NMTOKEN.
Default value: undefined
The value must be unique within the <matches> element.
Used in: <match>.
Similarity - indicates the similarity level between the content of the
<source>
child of a
<match>
element and the translatable text being matched.
Value description: a decimal number between 0.0 and 100.0.
Default value: undefined
Used in: <match>.
Match quality - indicates the quality of the <target> child of a <match> element based on an external benchmark or metric.
Value description: a decimal number between 0.0 and 100.0.
Default value: undefined
Used in: <match>.
Note
This attribute can carry a human review based metrics score, a Machine Translation self-reported confidence score etc.
Match suitability - indicates the general suitability and relevance of its <match> element with the regard to populating the <target> child of the enclosing <segment> element based on various external benchmarks or
metrics pertaining to both the <source> child of the enclosing <segment> and the <target> child of the <match>.
This attribute is intended to carry a value that can be combined from values provided in
similarity and matchQuality attributes based on an external algorithm.
Value description: a decimal number between 0.0 and 100.0.
Default value: undefined
Used in: <match>.
Note
This attribute is also useful for mapping match-quality as specified in XLIFF 1.2.
Processing Requirements
Tools processing this module must make use of
matchSuitabilityfor match ordering purposes if the attribute is specified.
Match origin - indicates the data origin of a
<match>
element.
Value description: Text.
Default value: undefined
Used in: <match>.
Type - Indicates the type of a <match> element, it gives the value providing
additional information on how the match was generated or qualifying further the relevance of the
match. The list of pre-defined values is general and user-specific information can be added
using the subtype attribute.
Value description:
Table B.1. Standard Values
| Value | Description |
|---|---|
| am | Assembled Match: match generated by assembling parts of different translations. |
| mt | Machine Translation: candidate generated by a machine translation system. |
| icm | In Context Match: match for which the context is the same as the context of the source content. E.g. the source text for both contents is also preceded by an identical source segment, or both appear as level 2 headings. |
| idm | Identifier-based Match: match that has an identifier identical to the source content. For example the previous translation of a given UI component with the same ID. |
| tb | Term Base: match obtained from a terminological database, i.e. the whole segment matches with a term base entry. |
| tm | Translation Memory: just an ordinary translation memory match. |
| other | match of a top level type not covered by any of the above definitions |
Default value: tm
Used in: <match>
Subtype - Indicates the subtype, i.e. a secondary level type, of a <match> element.
Value description:
The value is composed of a prefix and a sub-value separated by a character : (U+003A). The prefix is a string uniquely identifying a collection of values for a specific authority. The sub-value is any string value defined by an authority.
The prefix xlf is reserved for this specification, but no sub-values are defined for it at this time. Other prefixes and sub-values may be defined by the users.
Default value: undefined
Used in: <match>
The schema listed below for reading convenience is accessible at http://docs.oasis-open.org/xliff/xliff-core/v2.0/csprd01/schemas/modules/matches.xsd.
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
elementFormDefault="qualified"
xmlns:mtc="urn:oasis:names:tc:xliff:matches:2.0"
xmlns:mda="urn:oasis:names:tc:xliff:metadata:2.0"
xmlns:xlf="urn:oasis:names:tc:xliff:document:2.0"
targetNamespace="urn:oasis:names:tc:xliff:matches:2.0">
<xs:import namespace="urn:oasis:names:tc:xliff:document:2.0"
schemaLocation="../xliff_core_2.0.xsd"/>
<xs:import namespace="urn:oasis:names:tc:xliff:metadata:2.0"
schemaLocation="metadata.xsd"/>
<xs:simpleType name="similarity">
<xs:restriction base="xs:decimal">
<xs:minInclusive value="0.0"/>
<xs:maxInclusive value="100.0"/>
</xs:restriction>
</xs:simpleType>
<xs:simpleType name="typeValues">
<xs:restriction base="xs:string">
<xs:enumeration value="am"/>
<xs:enumeration value="ebm"/>
<xs:enumeration value="idm"/>
<xs:enumeration value="ice"/>
<xs:enumeration value="mt"/>
<xs:enumeration value="tm"/>
</xs:restriction>
</xs:simpleType>
<!-- Elements for holding translaton candidates -->
<xs:element name="matches">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="1" maxOccurs="unbounded"
ref="mtc:match"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="match">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="1" maxOccurs="1" ref="xlf:source"/>
<xs:element minOccurs="1" maxOccurs="1" ref="xlf:target"/>
<xs:element minOccurs="0" maxOccurs="1" ref="xlf:originalData"/>
<xs:element minOccurs="0" maxOccurs="1" ref="mda:metadata"/>
</xs:sequence>
<xs:attribute name="id" use="optional" type="xs:NMTOKEN"/>
<xs:attribute name="type" use="optional" type="mtc:typeValues"/>
<xs:attribute name="origin" use="optional"/>
<xs:attribute name="similarity" use="optional" type="mtc:similarity"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
</xs:complexType>
</xs:element>
</xs:schema>
Appendix C Glossary Module
Simple glossaries, consisting of a list of terms with a definition or translation, can be optionally embedded in an XLIFF document using the namespace mechanism to include elements from the Glossary module.
The namespace for the Glossary module is: urn:oasis:names:tc:xliff:glossary:2.0
The elements defined in the Glossary module are:
<glossary>,
<glossentry>,
<term>,
<translation> and
<definition>.
Legend:
| 1 = one |
| + = one or more |
| ? = zero or one |
<glossary>1 | +---<glossentry>+ | +---<term>1 | +---<translation>? | +---<definition>?
Glossary entry.
Contains:
One <term> element followed by |
Zero or one <translation>
element followed by |
Zero or one <definition>
element. |
Processing Requirements
A
<glossentry>element must contain a<translation>or a<definition>element to be valid.
A term in the glossary, expressed in the source language of the enclosing
<xliff> element.
Contains:
| Plain text. |
A translation of the sibling <term>
element expressed in the target language of the enclosing
<xliff> element.
Contains:
| Plain text. |
Optional definition in plain text for the term stored in the sibling
<term> element.
Contains:
| - Plain text. |
Attributes
- source, required |
The schema listed below for reading convenience is accessible at http://docs.oasis-open.org/xliff/xliff-core/v2.0/csprd01/schemas/modules/glossary.xsd.
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified"
xmlns:gls="urn:oasis:names:tc:xliff:glossary:2.0"
targetNamespace="urn:oasis:names:tc:xliff:glossary:2.0">
<xs:import namespace="http://www.w3.org/XML/1998/namespace"
schemaLocation="http://www.w3.org/2001/xml.xsd"/>
<!-- Elements for holding simple glossary data -->
<xs:element name="glossary">
<xs:complexType mixed="false">
<xs:sequence>
<xs:element minOccurs="1" maxOccurs="unbounded" ref="gls:glossentry" />
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="glossentry">
<xs:complexType mixed="false">
<xs:sequence>
<xs:element minOccurs="1" maxOccurs="1" ref="gls:term"/>
<xs:element minOccurs="0" maxOccurs="1" ref="gls:translation" />
<xs:element minOccurs="0" maxOccurs="1" ref="gls:definition" />
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="term">
<xs:complexType mixed="true"/>
</xs:element>
<xs:element name="translation">
<xs:complexType mixed="true"/>
</xs:element>
<xs:element name="definition">
<xs:complexType mixed="true">
<xs:attribute name="source" use="required" />
</xs:complexType>
</xs:element>
</xs:schema>
Appendix D Format Style Module
This is intended as a namespace mechanism to carry inside an XLIFF document information needed for generating a quick at a glance html preview of XLIFF content using a predefined set of simple html formatting elements.
Format Style module consists of just two attributes: fs and subFs. It does not specify any elements.
Format Style allows most structural and inline XLIFF core elements to convey basic formatting information using a predefined subset of HTML formatting elements. It primarily enables the generation of HTML pages or snippets for preview and review purposes. It must not be used to prescibe a roundtrip to a source document format.
The fs attribute holds the name of an HTML formatting element. If additional style
information is needed, the optional subFs attribute is provided.
The attributes defined in the Format Style module are:
fs,
subFs.
Format style attribute, fs - allows most structural and inline XLIFF core elements to convey
basic formatting information using a predefined subset of HTML formatting elements (for example,
HTML elements names like <script> are not included). It enables the generation of HTML pages
or snippets for preview and review purposes. This attribute is not intended to facilitate round-tripping back into the original
format. If additional style information is needed, the optional subFs attribute is provided.
Value description:
Table D.1. fs attribute values
| a | anchor |
| b | bold text style |
| bdo | I18N BiDi over-ride |
| big | large text style |
| blockquote | long quotation |
| body | document body |
| br | forced line break |
| button | push button |
| caption | table caption |
| center | shorthand for DIV align=center |
| cite | citation |
| code | computer code fragment |
| col | table column |
| colgroup | table column group |
| dd | definition description |
| del | deleted text |
| div | generic language/style container |
| dl | definition list |
| dt | definition term |
| em | emphasis |
| h1 | heading |
| h2 | heading |
| h3 | heading |
| h4 | heading |
| h5 | heading |
| h6 | heading |
| head | document head |
| hr | horizontal rule |
| html | document root element |
| i | italic text style |
| img | image |
| label | form field label text |
| legend | fieldset legend |
| li | list item |
| ol | ordered list |
| p | paragraph |
| pre | preformatted text |
| q | short inline quotation |
| s | strike-through text style |
| samp | sample program output, scripts, etc. |
| select | option selector |
| small | small text style |
| span | generic language/style container |
| strike | strike-through text |
| strong | strong emphasis |
| sub | subscript |
| sup | superscript |
| table | |
| tbody | table body |
| td | table data cell |
| tfoot | table footer |
| th | table header cell |
| thead | table header |
| title | document title |
| tr | table row |
| tt | teletype or monospaced text style |
| u | underlined text style |
| ul | unordered list |
Default value: undefined.
Used in:
<file>,
<unit>, <segment>, <ignorable>, <notes>, <note>,
<originalData>, <data>, <source>, <target>, <cp>, <sc>, <ec>, <ph>, <pc>, <mrk>, <sm> and <em>.
Example:To facilitate HTML preview, fs can be applied to XLIFF like this like:
<xliff>
<file fs:fs="html">
<unit id="1" fs:fs="div">
<segment>
<source fs:fs="p">Mick Jones renewed his interest in the Vintage <pc id="1" fs:fs="strong">'72 Telecaster Thinline </pc> guitar. <x fs:fs="br" />He says <pc fs:fs="q">I love 'em</pc></source>
</segment>
</unit>
</file>
</xliff>With an XSL stylesheet like this:
<xsl:template match="node()|@*">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="*" priority="2">
<xsl:choose>
<xsl:when test="@fs:fs">
<xsl:element name="{@fs:fs}">
<xsl:apply-templates />
</xsl:element>
</xsl:when>
<xsl:otherwise>
<xsl:apply-templates />
</xsl:otherwise>
</xsl:choose>
</xsl:template>You can generate a an HTML page like this:
<html>
<div>
<p>Mick Jones renewed his interest in the Vintage <strong>'72 Telecaster Thinline </strong> guitar. <br/>He says <q>I love 'em</q>
</p>
</div>
</html>Sub-format style, subFs - allows extra metadata, like URL for example, to be added in concert
with the fs attribute.
The subFs must only be used to carry attribute name/value
comma-delimited pairs for attributes that are valid for the HTML element identified by the
accompanying fs. Example: fs:fs="img" fs:subFs="src,smileface.png".
Commas (,) and backslashes (\) in the value part of the pair must be escaped with a backslash.
The subFs attribute is not intended to facilitate round-tripping back into the original format.
Value description: IRI.
Default value: undefined.
Used in:
<file>,
<unit>, <segment>, <ignorable>, <notes>, <note>,
<originalData>, <data>, <source>, <target>, <cp>, <sc>, <ec>, <ph>, <pc>, <mrk>, <sm> and <em>.
Appendix E Metadata Module
The Metadata module provides a mechanism for storing custom metadata using elements that are part of the official XLIFF specification.
The namespace for the Metadata module is: urn:oasis:names:tc:xliff:metadata:2.0
The elements defined in the Metadata module are: <metadata>, <metagroup>, and <meta>.
Container for metadata associated with the enclosing element.
Contains:
- One or more <metagroup> elements |
The attribues defined in the Metadata module are:
category and type.
category - indicates a category for metadata contained in the enclosing <metagroup> element.
Default value: undefined
Used in: <metagroup>.
type - indicates the type of metadata contained by the enclosing element.
Default value: undefined
Used in: <meta>.
The schema listed below for reading convenience is accessible at http://docs.oasis-open.org/xliff/xliff-core/v2.0/csprd01/schemas/modules/metadata.xsd.
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified"
xmlns:mda="urn:oasis:names:tc:xliff:metadata:2.0"
targetNamespace="urn:oasis:names:tc:xliff:metadata:2.0">
<xs:import namespace="http://www.w3.org/XML/1998/namespace"
schemaLocation="http://www.w3.org/2001/xml.xsd"/>
<!-- Elements for holding custom metadata -->
<xs:element name="metadata">
<xs:complexType mixed="false">
<xs:sequence>
<xs:element minOccurs="1" maxOccurs="unbounded" ref="mda:metagroup" />
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="metagroup">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="1" maxOccurs="unbounded" ref="mda:meta" />
</xs:sequence>
<xs:attribute name="category" use="optional"/>
</xs:complexType>
</xs:element>
<xs:element name="meta">
<xs:complexType mixed="true">
<xs:attribute name="type" use="required" type="xlf:attrType_type"/>
</xs:complexType>
</xs:element>
</xs:schema>
Appendix F Resource Data Module
The Resource Data module provides a mechanism for referencing external resource data that may need to be modified or used as contextual reference during translation.
The namespace for the Resource Data module is: urn:oasis:names:tc:xliff:resourceData:2.0
The elements defined in the Resource Data module are: <resourceData>, <source>, <target>, and <reference>.
Legend:
| ? = zero or one |
| * = zero, one or more |
<resourceData>* | +---<source>? | +---<target>? | +---<reference>*
Specifies the references to external resource data that may need to be modified or used as contextual reference during translation.
Contains:
- Zero or One <source> element followed by |
- Zero or One <target> element followed by |
- Zero, one, or more <reference> elements |
Attributes:
- id, optional |
- mimeType, required |
- context, optional |
| - attributes from any namespace, optional |
Processing Requirements
If a user agent does not understand how to process the
mimeType, or the file it references, the Resource Data module can be ignored, but still must be preserved.The value of the optional id attribute must be unique among all
<resourceData>children of the enclosing<file>element.The required
mimeTypeattribute should only be modified or removed if the referenced files are modified or removed.For each instance of
<resourceData>containing only<source>:User agents may leave
<resourceData>unchanged, e.g. they are not required to create<target>or<reference>.User agents may create
<target>or<reference>as a siblings of<source>.
References the actual resource data that may need to be modified or used as contextual reference during translation.
Contains:
| - This element is always empty. |
Attributes:
- href, required |
- xml:lang, optional |
| - attributes from any namespace, optional |
Processing Requirements
When the optional
xml:langattribute is present, its value must be equal to the value of thesrcLangattribute of the enclosing<xliff>element.When the
contextattribute of<resourceData>is set to yes:When the
contextattribute of<resourceData>is set to no:
References the localized counterpart of the sibling <source> element.
Contains:
| - This element is always empty. |
Attributes:
- href, required |
- xml:lang, optional |
| - attributes from any namespace, optional |
Processing Requirements
When the optional
xml:langattribute is present, its value must be equal to the value of thetgtLangattribute of the enclosing<xliff>element.When the
contextattribute of<resourceData>is set to yes:When the
contextattribute of<resourceData>is set to no:
References contextual data relating to the sibling <source> and <target> elements, such as a German screenshot for a Luxembourgish translator.
Contains:
| - This element is always empty. |
Attributes:
- href, required |
- xml:lang, optional |
| - attributes from any namespace, optional |
Processing Requirements
When the optional
xml:langattribute is present, its value does not need to be equal to the value of thesrcLangortgtLangattribute of the enclosing<xliff>element.User agents may create
<reference>if not already present.User agents should not modify
<reference>.User agents may remove
<reference>.
The attributes defined in the Resource Data module are: id, xml:lang, mimeType, context, href, and resourceDataId.
Identifier - A character string used to identify a <resourceData> element.
Value description: NMTOKEN
Default value: undefined
Used in:<resourceData>
Language - The xml:lang attribute specifies the language variant of the text of a given element.
For example: xml:lang="fr-FR" indicates the French language as spoken in France.
Value description: A language code as described in [BCP 47].
Default value: undefined
Used in: <source>,
<target>, and
<reference>.
MIME type, mimeType - indicates the type of a resource object. This generally corresponds to the content type of [RFC 2045], the MIME specification; e.g. mimeType="text/xml" indicates the resource data is a text file of XML format.
Value description: A MIME type. An existing MIME type must be used from a list of standard values.
Default value: undefined
Used in:<resourceData>
Note
If you cannot use any of the standard MIME type values as specified above, a new MIME type can be registered according to [RFC 2048].
Contextual Information - Indicates whether an external resource is to be used for context only and not modified.
Value description: yes or no
Default value: yes
Used in:<resourceData>
Hypertext Reference, href - IRI referencing an external resource.
Value description: IRI.
Default value: undefined
Used in:<source>, <target>, and <reference>
Resopurce Data Reference - Holds a reference to an associated <resourceData> element.
Value description: An XSD NMTOKEN that must be the value of the id attribute of the <resourceData> element being referenced.
Default value: undefined
Used in: <xlf:unit>
In this example, referenced XML contains resource data for a user interface control. The
control is the container for the text “Load Registry Config” and needs to be resized to
accommodate the increased length of the string due to translation. The res:resourceDataId attribute in the
<unit> element refers to the appropriate <resourceData> element, which references the data to be modified.
The name attribute of the <unit> element serves as the key for a user agent
to associate <source> and <target> text with resource data contained in the referenced
XML.
<file id="1">
<res:resourceData id="r1" mimeType="text/xml" context="no">
<res:source href="resources\en\registryconfig.resources.xml" />
<res:target href="resources\de\registryconfig.resources.xml" />
</res:resourceData>
<unit id="1" name="130;WIN_DLG_CTRL_" res:resourceDataId="r1">
<segment id="1" state="translated">
<source>Load Registry Config</source>
<target>Registrierungskonfiguration laden</target>
</segment>
</unit>
</file>
In this example, referenced images are used for context when translating. The res:ResourceDataRef
attribute in the <unit> element refers to the appropriate
<resourceData> element, which references
the image to be displayed to the user.
<file id="1">
<res:resourceData id="r1" mimeType="image/jpeg" context="yes">
<res:source href="resources\en\registryconfig.resources.jpg" />
<res:target href="resources\de\registryconfig.resources.jpg" />
</res:resourceData>
<unit id="1" name="133;WIN_DLG_CTRL_" res:ResourceDataId="r1">
<segment id="1" state="translated">
<source>Remove Registry Config</source>
<target>Registrierungskonfiguration entfernen</target>
</segment>
</unit>
</file>
The schema listed below for reading convenience is accessible at http://docs.oasis-open.org/xliff/xliff-core/v2.0/csprd01/schemas/modules/resource_data.xsd.
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified"
xmlns:res="urn:oasis:names:tc:xliff:resourceData:2.0"
targetNamespace="urn:oasis:names:tc:xliff:resourceData:2.0">
<xs:import namespace="http://www.w3.org/XML/1998/namespace"
schemaLocation="http://www.w3.org/2001/xml.xsd"/>
<xs:element name="resourceData">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="0" maxOccurs="1" ref="res:source"/>
<xs:element minOccurs="0" maxOccurs="1" ref="res:target"/>
<xs:element minOccurs="0" maxOccurs="unbounded" ref="res:reference"/>
</xs:sequence>
<xs:attribute name="id" use="optional" type="xs:NMTOKEN"/>
<xs:attribute name="mimeType" use="required"/>
<xs:attribute name="context" use="optional"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
</xs:complexType>
</xs:element>
<xs:element name="source">
<xs:complexType mixed="false">
<xs:attribute name="href" use="required"/>
<xs:attribute ref="xml:lang" use="optional"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
</xs:complexType>
</xs:element>
<xs:element name="target">
<xs:complexType mixed="false">
<xs:attribute name="href" use="required"/>
<xs:attribute ref="xml:lang" use="optional"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
</xs:complexType>
</xs:element>
<xs:element name="reference">
<xs:complexType mixed="false">
<xs:attribute name="href" use="required"/>
<xs:attribute ref="xml:lang" use="optional"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
</xs:complexType>
</xs:element>
</xs:schema>
Appendix G Change Tracking Module
The Change Tracking module is used to store revision information for XLIFF elements and attributes.
The namespace for the Change Tracking module is: urn:oasis:names:tc:xliff:changeTracking:2.0
The elements defined in the Change Tracking module are: <changeTrack>, <revisions>, <revision>, and <item>.
Legend:
| ? = zero or one |
| + = one or more |
<changeTrack>? | +---<revisions>+ | +---<revision>+ | +---<item>+
Parent container for change tracking information associated with the enclosing element.
Contains:
- One or more <revisions> elements. |
Container for logical groups of revisions associated with the enclosing element.
Contains:
- One or more <revision> elements. |
Attributes:
- appliesTo, required |
- nid, optional |
- currentVersion, optional |
| - attributes from any namespace, optional |
Processing Requirements
User agents may create
<revisions>elements with attributes.User agents should not modify
<revisions>and its attributes defined in this module, except in the case where thecurrentVersionattribute is used. This attribute should be updated when a new revision becomes the most current.User agents should not remove
<revisions>and its attributes defined in this module.When the
appliesToattribute refers to an element that is a multiple instance within the enclosing element, thenidattribute must be used to reference an individual instance if and only if the referenced instance has an id. Using<notes>as an example:<notes> <note id="n1">new note</note> <note id="n2">another note</note> </notes> <changeTrack> <revisions appliesTo="note" nid="n1"> <revision><item property="content">old note</item></revision> </revisions> </changeTrack>
Container for specific revisions associated with the enclosing element.
Contains:
- One or more <item> elements. |
Attributes:
- author, optional |
- datetime, optional |
- version, optional |
- checksum, optional |
| - attributes from any namespace, optional |
Processing Requirements
User agents may create
<revision>elements with attributes.User agents should not modify
<revision>and its attributes defined in this module.User agents may remove
<revision>and its attributes defined in this module if and only if there is more than one instance of<revision>present. For example, a user agent can decide to preserve only the most current revision.When the
checksumattribute is used, a user agent should compute and store the checksum on the initial instance of the element and any revisions being tracked. It should also detect that the current checksum of an element is out of date and allow the changes to be committed as a new revision or be reverted back to the latest tracked state.
Container for a specific revision associated with the enclosing element.
Contains:
| - Text. |
Attributes:
- property, required |
| - attributes from any namespace, optional |
Processing Requirements
User agents may create
<item>elements with attributes.User agents should not modify
<item>and its attribute defined in this module.User agents should not remove
<item>and its attribute defined in this module, unless they are removed as part of a<revision>elemnent removed according to its own processiing requirements.
The attributes defined in the Change Tracking module are: appliesTo, author, checksum, currentVersion, datetime, nid, property, and version.
appliesTo – indicates the XLIFF element to which the change track information applies.
Value description: Any valid XLIFF element name.
Default value: undefined
Used in:<revisions>
author - indicates the user or agent that created or modified the referenced element or its attributes.
Value description: Text.
Default value: undefined
Used in:<revision>.
checksum – a checksum of the revision data used to detect changes made by non-compliant XLIFF user agents, such as a manual search and replace operation using a text editor.
Value description: A CRC-32 checksum of the revision data.
Note
[Editorial Note: ITU reference along with Joachim's pseudocode must be added here..]
Default value: undefined
Used in:<revision>, any XLIFF element that accepts attributes from any namespace.
currentVersion - holds a reference to the most current version of a revision.
Value description: An XSD NMTOKEN that must be the value of the version attribute of one of the <revision> elements listed in the same <revisions> element.
Default value: none
Used in:<revisions>.
Date and Time, datetime - indicates the date and time the referenced element or its attributes were created or modified.
Value description: Date in [ISO 8601] format.
Default value: undefined
Used in:<revision>.
Original data reference, nid - holds a reference to a single instance of an element that has multiple instances within the enclosing element.
Value description: An XSD NMTOKEN that must be the value of the id attribute of a single instance of an element that is a multiple instance within the enclosing element.
Default value: undefined
Used in:<revisions>
property – the type of revision data.
Value description: The value must be either content to signify the content of an element, or the name of the attribute relating to the revision data.
Default value: none
Used in:<item>.
version - indicates the version of the referenced element or its attributes that were created or modified.
Value description: NMTOKEN.
Default value: undefined
Used in:<revision>.
The following example shows simple change tracking for <source>,
<target>, and
<notes>.
The core elements serve as the current version and previous versions are stored in the Change Tracking module.
<unit id="1">
<segment id="1">
<source ctr:author="system" ctr:datetime="2013-02-15T10:00:00+8:00">
Hello World</source>
<target ctr:author="Erik" ctr:datetime="2013-02-17T11:00:00+8:00">
Hallo Welt</target>
<notes>
<note id="n1" category="instruction" ctr:author="Ryan"
ctr:datetime="2013-02-15T10:30:00+8:00">A formal greeting</note>
<note id="n2" category="request" ctr:author="Erik"
ctr:datetime="2013-02-17T11:30:00+8:00">Please Review</note>
</notes>
<changeTrack>
<revisions appliesTo="source">
<revision author="system" datetime="2013-01-15T10:00:00+8:00">
<item property="content">Hello</item>>
</revision>
<revision author="system" datetime="2012-12-15T10:00:00+8:00">
<item property="content">Hi</item>
</revision>
</revisions>
<revisions appliesTo="target">
<revision author="Erik" datetime="2013-01-17T11:00:00+8:00">
<item property="content">Hallo</item>
</revision>
<revision author="Erik" datetime="2012-12-17T11:00:00+8:00">
<item property="content">Gruesse</item>
</revision>
</revisions>
<revisions appliesTo="note" nid="n1">
<revision author="Ryan" datetime="2012-12-15T10:30:00+8:00">
<item property="content">An informal greeting</item>
<item property="category">comment</item>
</revision>
</revisions>
</changeTrack>
</segment>
</unit>
The following example shows change tracking for <source>,
<target>, and
<notes>
using a checksum to detect changes that may have been made outside of an XLIFF aware user agent. Current versions and previous versions are both stored in the Change Tracking module. A checksum on a core element and the most current version of its revision in the Change Tracking module can be checked to determine the existence of an external revision, for example the addition of an exclamation point in the target string.
<unit id="1">
<segment id="1">
<source ctr:checksum="4A17B156">Hello World</source>
<!-- checksum is no longer valid due to the addition of an exclamation point -->
<target ctr:checksum="50281475">Hallo Welt!</target>
<notes>
<note category="instruction" id="n1" ctr:checksum="59890430">A formal greeting</note>
<note category="comment" id="n2" ctr:checksum="80E3EB9D">Please Review</note>
</notes>
<changeTrack>
<revisions appliesTo="source" currentVersion="r1">
<revision author="system" datetime="2013-02-15T10:00:00+8:00"
version="r1" checksum="4A17B156">
<item property="content">Hello World</item>>
</revision>
<revision author="system" datetime="2013-01-15T10:00:00+8:00"
version="r2" checksum="F7D18982">
<item property="content">Hello</item>>
</revision>
<revision author="system" datetime="2012-12-15T10:00:00+8:00"
version="r3" checksum="F7D18982">
<item property="content">Hi</item>
</revision>
</revisions>
<revisions appliesTo="target" currentVersion="r1">
<revision author="Erik" datetime="2013-02-17T11:00:00+8:00"
version="r1" checksum="50281475">
<item property="content">Hallo Welt</item>
</revision>
<revision author="Erik" datetime="2013-01-17T11:00:00+8:00"
version="r2" checksum="78B31ED5">
<item property="content">Hallo</item>
</revision>
<revision author="Erik" datetime="2012-12-17T11:00:00+8:00"
version="r3" checksum="089D3926">
<item property="content">Gruesse</item>
</revision>
</revisions>
<revisions appliesTo="note" nid="n1" currentVersion="r1">
<revision author="Ryan" datetime="2013-02-15T10:30:00+8:00"
version="r1" checksum="59890430">
<item property="content">A formal greeting</item>
<item property="category">instruction</item>
</revision>
<revision author="Ryan" datetime="2012-12-15T10:30:00+8:00"
version="r2" checksum="885537C1">
<item property="content">An informal greeting</item>
<item property="category">comment</item>
</revision>
</revisions>
</changeTrack>
</segment>
</unit>
The schema listed below for reading convenience is accessible at http://docs.oasis-open.org/xliff/xliff-core/v2.0/csprd01/schemas/modules/change_tracking.xsd.
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified"
xmlns:ctr="urn:oasis:names:tc:xliff:changeTrack:2.0"
targetNamespace="urn:oasis:names:tc:xliff:changeTrack:2.0">
<xs:import namespace="http://www.w3.org/XML/1998/namespace"
schemaLocation="http://www.w3.org/2001/xml.xsd"/>
<xs:element name="changeTrack">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="1" maxOccurs="unbounded" ref="ctr:revisions"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="revisions">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="1" maxOccurs="unbounded" ref="ctr:revision"/>
</xs:sequence>
<xs:attribute name="appliesTo" use="required" type="xlf:appliesTo"/>
<xs:attribute name="nid" use="optional" type="xs:NMTOKEN"/>
<xs:attribute name="currentVersion" use="optional"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
</xs:complexType>
</xs:element>
<xs:element name="revision">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="1" maxOccurs="unbounded" ref="ctr:item"/>
</xs:sequence>
<xs:attribute name="author" use="optional"/>
<xs:attribute name="datetime" use="optional"/>
<xs:attribute name="version" fixed="2.0" use="required"/>
<xs:attribute name="checksum" use="optional"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
</xs:complexType>
</xs:element>
<xs:element name="item">
<xs:complexType mixed="true">
<xs:attribute name="property" use="required"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
</xs:complexType>
</xs:element>
</xs:schema>
Appendix H Size Restriction Module
The Size Restriction module provides a mechanism to annotate the XLIFF content with information on storage and general size restrictions.
The restriction framework has support for two distinct types of restrictions; storage
size restrictions and general size restriction. The reason for this is that it is often
common to have separate restrictions between storage and display / physical
representation of data. Since it would be impossible to define all restrictions here a
concept of restriction profile is introduced. The profiles for storage size and general
size are independent. The information related to restriction profiles are stored in the
processing invariant part of the XLIFF file like the <xlf:file>, <xlf:group> and <xlf:unit> elements and contained within elements
defined in this module. The information regarding the specific restrictions are stored
on the processing invariant parts and on the inline elements as attributes or attributes
referencing data in the elements defined in this module. To avoid issues with
segmentation no information regarding size restrictions is present on <xlf:segment>, <xlf:source> and <xlf:target> elements. The module defines a namespace
for all the elements and attributes it introduce, in the rest of the module
specification elements and atributes are in this namespace unless stated otherwise. In
other parts of the XLIFF specification the prefix "slr" is used to refer to this modules
namespace. For clarity the prefix "xlf" will be used for core XLIFF elements and
attributes. Profile names use the same namespace like naming conventions as parts of the
XLIFF Core specification. The name should be composed of two components separated by a
colon. <authority>:<name>. The authority "xliff" is reserved for profiles defined
by the OASIS XLIFF Technical Committee.
The namespace for the Size and Length restriction module is:
urn:oasis:names:tc:xliff:sizerestriction:2.0
The elements defined in the Size and Length restriction module are: <profiles>, <normalization> and <data>.
This element selects the restriction profiles to use in the document. If no storage or general profile is specified the default values (empty) of those elements will disable restriction checking in the file.
Contains:
- Zero or one <normalization> element
followed by |
| - elements from any namespace, optional |
Attributes:
- generalProfile, optional |
- storageProfile, optional |
Processing Requirements
Any overall configuration or settings related to the selected profile must be placed in child elements of this element.
Data not related to the configuration of the selected profiles must not be placed in this element.
This element is used to hold the attributes specifying normalization form to apply to storage and size restrictions defined in the standard profiles.
Contains:
| - empty element |
Attributes:
- general, optional |
- storage, optional |
Processing Requirements
If this element is not present no normalization should be performed for the standard profiles.
Other profiles may use this element in its specified form but must not add new extensions to it.
This elements act as a container for data needed by the specified profile to check the part of the XLIFF document that is a sibling or descendant of a sibling of this element. It is not used by the default profiles.
Contains:
| - elements from any namespace, optional |
Attributes:
- profile, required |
| - attributes from any namespace, optional |
Processing Requirements
Third party profiles must place all data in this element instead of using other extension points if the data serves no other purpose in the processing of the document.
Data not used by the specified profile must not be placed in this element.
The attributes defined in the Size and Length restriction module are: storageProfile, generalProfile, storage, general, profile, storageRestriction, sizeRestriction, equivStorage , sizeInfo and sizeInfoRef.
This attribute specifies which profile should be used to check storage size restrictions. Empty means that no restrictions should be applied.
Value description: Name of restriction profile to use for storage size restrictions.
Default value: empty
Used in:<profiles>.
This attribute specifies which profile should be used to check general size restrictions. Empty means that no restrictions should be applied.
Value description: Name of restriction profile to use for general size restrictions.
Default value: empty
Used in:<profiles>.
This attribute specifies the normalization to apply for storage size restrictions. The only normalization forms C and D as specified by the Unicode Consortium are supported, see Unicode Standard Annex #15.
Value description: normalization to apply.
Table H.1. Values
| Value | Description |
|---|---|
| none | No additional normalization should be done, content should be used as represented in the document. It is possible that other agents have already done some type of normalization when modifying content. This means that this setting could give different results depending on what agent(s) are used to preform a specific action on the document. |
| nfc | Normalization Form C should be used |
| nfd | Normalization Form D should be used |
Default value: "none"
Used in: <normalization>.
This attribute specifies the normalization to apply for general size restrictions. The only normalization forms C and D as specified by the Unicode Consortium are supported, see Unicode Standard Annex #15.
Value description: normalization to apply.
Table H.2. Values
| Value | Description |
|---|---|
| none | No additional normalization should be done, content should be used as represented in the document. It is possible that other agents have already done some type of normalization when modifying content. This means that this setting could give different results depending on what agent(s) are used to preform a specific action on the document. |
| nfc | Normalization Form C should be used |
| nfd | Normalization Form D should be used |
Default value: "none"
Used in:<normalization>.
This attribute is used on the <data> element to indicate what profile the contents of that element apply to.
Value description: Name of a restriction profile
Default value: undefined
Used in:<data>.
This attribute specifies the storage restriction to apply to the collection descendants of the element it is defined on.
Value description: Interpretation of the value is dependent on selected storageProfile. It must represent the restriction to apply to the indicated sub part of the document.
Default value: undefined
Used in:
<file>,
<group>,
<unit>,
<mrk>,
<sm>,
<pc> and
<sc>.
This attribute specifies the size restriction to apply to the collection descendants of the element it is defined on.
Value description: Interpretation of the value is dependent on selected generalProfile. It must represent the restriction to apply to the indicated sub part of the document.
Default value: undefined
Used in:
<file>,
<group>,
<unit>,
<mrk>,
<sm>,
<pc> and
<sc>.
This attribute provide a means to specify how much storaqge space an inline element will use in the native format. This size contribution is then added to the size contributed by the textual parts.
This attribute is only allowed on the <ec> element if that elemnt has the isolated attribute set to yes. Otherwise the attribute on the paired <sc>
element also cover its partner <ec> element.
Value description: Interpretation of the value is dependent on selected storageProfile. It must represent the equivalent storage size represented by the inline element.
Default value: undefined
This attribute is used to associate profile specific information to inline elements so that size information can be decoupled from the native format or represented when the native data is not available in the XLIFF document.
It can be used on both inline elements and structural elements to provide information on things like GUI dialog or control sizes, expected padding or margins to consider for size, what font is used for contained text and so on.
This attribute is only allowed on the <ec> element if that elemnt has the isolated attribute set to yes. Otherwise the attribute on the paired <sc>
element also cover its partner <ec> element.
Value description: Interpretation of the value is dependent on selected
generalProfile. It
must represent information related to how the element it is attached to
contributes to the size of the text or entity in which it occurs or represents.
Default value: undefined
Restriction: at most one of this attribute and sizeInfoRef can occur. Both cannot be specified at the same time.
Used in:
<file>,
<group>,
<unit>,
<pc>,
<sc> and
<ec> and
<ph>,
This attribute is used to point to data that provide the same function as the sizeInfo attribute does, but with the data stored outside the inline content of the XLIFF segment.
This attribute is only allowed on the <ec> element if that elemnt has the isolated attribute set to yes. Otherwise the attribute on the paired <sc>
element also cover its partner <ec> element.
Value description: a reference to data that provide the same information that could be put in a sizeInfo attribute.
The reference must point to an element in a <data> element that is a sibling to the element this attribute is attached to or a sibling to one of its ancestors.
Default value: undefined
Restriction: at most one of this attribute and sizeInfo can occur. Both cannot be specified at the same time.
Used in:
<file>,
<group>,
<unit>,
<pc>,
<sc> and
<ec> and
<ph>,
This profile implements a simple string length restriction based on the number of
Unicode code points. It is possible to specify if normalization should be applied
using the <normalization> element
and the general attribute. This profile
make use of the following attributes from this module:
The value of this attribute holds the ”maximum” or ”minimum and maximum” size of the string. Either size must be an integer. The maximum size can also be ’*’ to denote that there is no maximum restriction. If only a maximum is specified it is implied that the minimum is 0 (empty string). The format of the value is the optional minimum size and a coma followed by a maximum size (”[minsize,]maxsize”). The default value is ’*’ which evaluates to a string with unbounded size.
These three profiles define the standard size restriction profiles for the common
Unicode character encoding schemes. It is possible to specify if normalization
should be applied using the <normalization>element and
the storage. All sizes are represented
in 8bit bytes. The size of text for these profiles is the size of the text converted
to the selected encoding without any byte order marks attached. The encodings are
specified by the Unicode Consortium in chapter 2.5 of the
Unicode specification.
Table H.3. Profiles
| Name | Description |
|---|---|
| xliff:utf8 | The number of 8bit bytes needed to represent the string encoded as UTF-8 as specified by the Unicode consortium. |
| xliff:utf16 | The number of 8bit bytes needed to represent the string encoded as UTF-16 as specified by the Unicode consortium. |
| xliff:utf32 | The number of 8bit bytes needed to represent the string encoded as UTF-32 as specified by the Unicode consortium. |
These profiles make use of the following attributes from this module:
The value of this attribute holds the ”maximum” or ”minimum and maximum” size of the string. Either size must be an integer. The maximum size can also be ’*’ to denote that there is no maximum restriction. If only a maximum is specified it is implied that the minimum is 0 (empty string). The format of the value is the optional minimum size and a coma followed by a maximum size (”[minsize,]maxsize”). The default value is ’*’ which evaluates to a string with unbounded size.
The value of this attribute is an integer representing how many bytes the
element it is set on should be considered to contribute to the total size. If
empty the default is 0. The <cp> is always converted to its representation in
the profiles encoding and the size of that representation is used as the size
contributed by the <cp>.
The general structure of this module together with the extensibility mechanisms provided, should lend itself to most size restriction schemes. For example to represent two dimensional data a profile might adopt using a coordinate style for the values of the general restriction attributes. Like ”{x,y}” to represent width and height or ”{{x1,y1},{x2,y2}}” to represent a bounding box. It should also be possible to embed information necessary to drive a display simulator and attach that data to text to do device specific checking. Or to provide font information and to glyph based general size checking.
To claim conformance to the XLIFF size and length restriction module a tool must meet the following criteria.
must Follow the schema of the XLIFF Core specification and the extensions provided in this module
must follow all processing requirements set forth in this module specification regarding the general use of elements and attributes
must support all standard profiles with normalization set to ”none”
should support all standard profiles with all modes of normalization
may support additional third party profiles for storage or general restrictions
must provide at least one of the following
Add size and length restriction information to a document
If it supports the specified profile(s) in the document it must provide a way to check if the size and length restrictions in the document are met according to the profile(s)
The schema listed below for reading convenience is accessible at http://docs.oasis-open.org/xliff/xliff-core/v2.0/csprd01/schemas/modules/size_restriction.xsd.
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified"
xmlns:slr="urn:oasis:names:tc:xliff:sizerestriction:2.0"
targetNamespace="urn:oasis:names:tc:xliff:sizerestriction:2.0">
<xs:import namespace="http://www.w3.org/XML/1998/namespace"
schemaLocation="http://www.w3.org/2001/xml.xsd"/>
<!-- Attributes for size and length restriction used on core elements-->
<xs:attribute name="equiv-storage" type="xs:string"/>
<xs:attribute name="size-info" type="xs:string"/>
<xs:attribute name="size-info-ref" type="xs:NMTOKEN"/>
<xs:attribute name="size-restriction" type="xs:string"/>
<xs:attribute name="storage-restriction" type="xs:string"/>
<!-- Elements for size and length restriction -->
<xs:element name="profiles">
<xs:complexType mixed="false">
<xs:sequence>
<xs:element minOccurs="0" maxOccurs="1" ref="slr:normalization" />
<xs:any maxOccurs="unbounded" minOccurs="0" namespace="##other" processContents="skip"/>
</xs:sequence>
<xs:attribute name="generalProfile" use="optional"/>
<xs:attribute name="storageProfile" use="optional"/>
</xs:complexType>
</xs:element>
<xs:element name="normalization">
<xs:complexType mixed="false">
<xs:attribute name="general" use="optional"/>
<xs:attribute name="storage" use="optional"/>
</xs:complexType>
</xs:element>
<xs:element name="data">
<xs:complexType mixed="false">
<xs:sequence>
<xs:any maxOccurs="unbounded" minOccurs="0" namespace="##other" processContents="skip"/>
</xs:sequence>
<xs:attribute name="profile" use="required"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
</xs:complexType>
</xs:element>
</xs:schema>
Appendix I Validation Module
This module defines a specific set of validation rules that can be applied to target text both globally and locally. Further constraints can be defined that allow rules to be applied to target text based on conditions in the source text or disabled to override a global scope.
The namespace for the Validation module is:
urn:oasis:names:tc:xliff:validation:2.0
The elements defined in the Validation module are:
<validation> and
<rule>.
Parent container for a list of rules and constraints to apply to the target text of the enclosing element.
Contains:
- One or more <rule> elements. |
Attributes:
| - attributes from any namespace, optional |
Processing Requirements
When the
<validation>element occurs at the<file>level, rules must be applied to all<target>elements within the scope of that<file>element, except where overrides are specified at the<group>or<unit>level.When
<validation>occurs at the<group>level, rules must be applied to all<target>elements within the scope of<group>, except where overrides are specified at the<unit>level.When
<validation>occurs at the<unit>level, rules must be applied to all<target>elements within the scope of<unit>.When
<validation>occurs at the<segment>level, rules must be applied to the<target>element within the scope of the<segment>.
A specific rule and constraint to apply to the target text of the enclosing element.
Contains:
| - This element is always empty. |
Attributes:
- startsWith, optional |
- endsWith, optional |
- occurrences, optional |
- mustLoc, optional |
- noLoc, optional |
- disabled, optional |
- existsInSource, optional |
- normalization, optional |
| - attributes from any namespace, optional |
Processing Requirements
Exactly one of the following attributes:
must be used in any one
<rule>element.User agents may create
<rule>elements.User agents must not modify attributes defined in this module present in any
<rule>element.User agents must not remove either
<rule>elements or their attributes defined in this module.
The attributes defined in the Validation module are:
startsWith,
endsWith,
occurrences,
mustLoc,
noLoc,
disabled,
existsInSource,
normalization,
Target text starts with, startsWith - is a test to verify that the target text starts with a defined value.
Value description: Text
Default value: none
Used in:<rule>
Processing Requirements
The target text must start with the value of
startsWith.
Target text ends with, endsWith - is a test to verify that the target text ends with a defined value.
Value description: Text
Default value: none
Used in:<rule>
Processing Requirements
The target text must end with the value of
endsWith.
occurrences - is a test to verify that a certain number of occurences of a specified string exists in the target text.
Value description: Text.
Characters left parenthesis ( (U+0028), right parenthesis )
(U+0029), and quotation mark " (U+0022) must be escaped by
enclosing within a pair of quotation marks, " (U+0022). The value
must follow this pattern: "(string)(integer)".
For example: In this occurrences="( )(0)", the value patern
prohibits any occurences of two non-breaking spaces next to each other. Here
occurrences="(:)(1)", exactly one occurrence of the colon is enforced.
Default value: none
Used in:<rule>
Processing Requirements
The target text must contain the
integernumber of occurences of thestringas specified inoccurrences.
Must localize, mustLoc - is a test for the presence of a string (substring) in the source text and a verification that it does not exist in the target text. Alternatively it can be used to verify presence of a prescribed replacement string in the target text.
Value description: Text.
Characters left parenthesis ( (U+0028), right parenthesis )
(U+0029), and quotation mark " (U+0022) must be escaped by
enclosing within a pair of quotation marks, " (U+0022). The value
must follow one of two patterns: either mustLoc="string"
or mustLoc="(string)(string)", where the prescribed replacement string is enclosed
within the second pair of parentheses.
Default value: none
Used in:<rule>
Processing Requirements
When
mustLoccontains only onestringfrom the source text, for example:mustLoc="hello world"; the target text must not contain thatstring.When
mustLoccontains astringfrom the source text and a replacementstringfor the target text, for example:mustLoc="(Hello world)(Hallo Welt)"; the target text must contain that replacementstring.
Not to localize, noLoc - is a test for the presence of a string (substring) in the source text and verification that it exists also in the target text.
Value description: Text
Default value: none
Used in:<rule>
Processing Requirements
The target text must contain the string specified by the value of
noLoc.
Disabled rule, disabled – determines whether a rule must or must not be applied within the
scope of its enclosing element. For example, a rule defined at the <file>
level may be disabled at the <unit> level.
This attribute is provided to allow for overriding execution of rules set at higher levels,
see <validation>.
Value description: yes or no
Default value: no
Used in:<rule>
Processing Requirements
When the
disabledattribute is set toyes, the rule must not be applied within the scope of its enclosing element.
Exists in source, existsInSource – determines whether a target text rule depends on the
rule’s being satisfied in the source text or not. For example, with this attribute set to
yes a test would check if the target text ends with a non-breaking space if and
only if the source text ends with a non-breaking space. The default value no means
that the rule will always be enforced in target text, irrespective if the source text satisfies
it. This attribute is only relevant when used with one of the following attributes: startsWith, endsWith, or occurrences, attributes, it must not be used with either the mustLoc attribute or with the noLoc attribute.
Using existsInSource set to
no will have no impact on execution of rules, except for overriding rules
behavior set with existsInSource on a
higher level.
Value description: yes or no
Default value: no
Used in:<rule>
Processing Requirements
When using the
existsInSourceattribute, exactly one of the following attributes:must be present within the same
<rule>element.Within one
<rule>element, with theexistsInSourceattribute set toyes, the rule must be applied to the target text if and only if the the rule is satisfied in the source text.When using one of the following attributes:
the
existsInSourceattribute must not be present within the same<rule>element.
normalization - specifies the normalization type to apply when validating a rule. Only the normalization forms C and D as specified by the Unicode Consortium are supported, see Unicode Standard Annex #15.
Value description: The allowed values are are listed in the table below along with their corresponding types of normalization to be applied.
Table I.1. Values
| Value | Description |
|---|---|
| none | No normalization should be done. |
| nfc | Normalization Form C must be used. |
| nfd | Normalization Form D must be used. |
Default value: nfc
Used in:<rule>
<file>
<validation>
<rule noLoc="Hello" />
</validation>
<unit>
<source>[Hello World from the XLIFF TC]"</source>
<target>[Hallo Welt vom XLIFF TC]"</target>
<validation>
<rule startsWith="[" existsInSource="yes" />
<rule endsWith="]" existsInSource="yes" />
<rule occurrences="( )(0)" />
<rule mustLoc="(World)(Welt)" />
<rule noLoc="Hello" disabled="yes" />
</validation>
</unit>
</file>
The schema listed below for reading convenience is accessible at http://docs.oasis-open.org/xliff/xliff-core/v2.0/csprd01/schemas/modules/validation.xsd.
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified"
xmlns:val="urn:oasis:names:tc:xliff:validation:2.0"
targetNamespace="urn:oasis:names:tc:xliff:validation:2.0">
<xs:import namespace="http://www.w3.org/XML/1998/namespace"
schemaLocation="http://www.w3.org/2001/xml.xsd"/>
<xs:element name="validation">
<xs:complexType>
<xs:sequence>
<xs:element minOccurs="1" maxOccurs="unbounded" ref="val:rule"/>
</xs:sequence>
<xs:anyAttribute namespace="##any" processContents="skip"/>
</xs:complexType>
</xs:element>
<xs:element name="rule">
<xs:complexType mixed="false">
<xs:attribute name="startsWith" use="optional"/>
<xs:attribute name="endsWith" use="optional"/>
<xs:attribute name="occurrences" use="optional"/>
<xs:attribute name="mustLoc" use="optional"/>
<xs:attribute name="noLoc" use="optional"/>
<xs:attribute name="disabled" use="optional"/>
<xs:attribute name="existsInSource" use="optional"/>
<xs:attribute name="normalization" use="optional"/>
<xs:anyAttribute namespace="##any" processContents="skip"/>
</xs:complexType>
</xs:element>
</xs:schema>
Appendix J Acknowledgements (Non-Normative)
The following individuals have participated in the creation of this specification and are gratefully acknowledged:
Amaya, Victor - Oracle
Chapman, Helena - IBM
Coady, Shirley - MultiCorpora R&D Inc.
Comerford, Tom - Individual
Estreen, Fredrik - Lionbridge
Filip, David - Localisation Research Centre
King, Ryan - Microsoft
Lieske, Christian - SAP AG
Loomis, Steven - IBM
Michael, Alan - Microsoft
Morado Vazquez, Lucia - Localisation Research Centre
O'Donnell, Kevin - Microsoft
Ow, Michael - IBM
Prause, Ingo - SDL
Raya, Rodolfo - Maxprograms
Ryoo, Jung Woo - Oracle
Savourel, Yves - ENLASO Corporation
Schnabel, Bryan - Individual
Schurig, Joachim - Lionbridge
Stahlschmidt, Uwe - Microsoft
Waldhör, Klemens - TAUS
Walters, David - IBM
Wasala, Asanka - Localisation Research Centre