OASIS logo

XLIFF Version 1.2

OASIS Standard

1 February 2008

Specification URIs:

This Version:

http://docs.oasis-open.org/xliff/v1.2/os/xliff-core.html

http://docs.oasis-open.org/xliff/v1.2/os/xliff-core.pdf

Previous Version:

http://docs.oasis-open.org/xliff/v1.2/cs02/xliff-core.html

http://docs.oasis-open.org/xliff/v1.2/cs02/xliff-core.pdf

Latest Version:

http://docs.oasis-open.org/xliff/xliff-core/xliff-core.html

http://docs.oasis-open.org/xliff/xliff-core/xliff-core.pdf

Latest Approved Version:

http://docs.oasis-open.org/xliff/xliff-core/xliff-core.html

http://docs.oasis-open.org/xliff/xliff-core/xliff-core.pdf

Technical Committee:

OASIS XML Localisation Interchange File Format (XLIFF) TC

Chair(s):

Bryan Schnabel < bryan.s.schnabel@exgate.tek.com >

Tony Jewtushenko < tony.jewtushenko@productinnovator.com>

Editor(s):

Yves Savourel < ysavourel@translate.com>

John Reid <jreid@novell.com>

Tony Jewtushenko < tony.jewtushenko@productinnovator.com>

Rodolfo M. Raya <rmraya@heartsome.net>

Related Work:

This specification replaces or supersedes:

XLIFF 1.1 Commitee Specification, 31 Oct 2003

Namespace:

urn:oasis:names:tc:xliff:document:1.2

Abstract:

This document defines the XML Localization Interchange File Format (XLIFF). The purpose of this vocabulary is to store localizable data and carry it from one step of the localization process to the other, while allowing interoperability between tools.

Status:

This document was last revised or approved by the XLIFF TC on the above date. The level of approval is also listed above. Check the current location noted above for possible later revisions of this document. This document is updated periodically on no particular schedule.

Technical Committee members should send comments on this specification to the Technical Committee's email list. Others should send comments to the Technical Committee by using the "Send A Comment" button on the Technical Committee' s web page at www.oasis-open.org/committees/xliff

For information on whether any patents have been disclosed that may be essential to implementing this specification, and any offers of patent licensing terms, please refer to the Intellectual Property Rights section of the Technical Committee web page ( http://www.oasis-open.org/committees/xliff/ipr.php).

The non-normative errata page for this specification is located at www.oasis-open.org/committees/xliff/

Notices

Copyright © OASIS® 1993 - 2007. All Rights Reserved.

All capitalized terms in the following text have the meanings assigned to them in the OASIS Intellectual Property Rights Policy (the "OASIS IPR Policy"). The full Policy may be found at the OASIS website.

This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published, and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this section are included on all such copies and derivative works. However, this document itself may not be modified in any way, including by removing the copyright notice or references to OASIS, except as needed for the purpose of developing any document or deliverable produced by an OASIS Technical Committee (in which case the rules applicable to copyrights, as set forth in the OASIS IPR Policy, must be followed) or as required to translate it into languages other than English.

The limited permissions granted above are perpetual and will not be revoked by OASIS or its successors or assigns.

This document and the information contained herein is provided on an "AS IS" basis and OASIS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY OWNERSHIP RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

OASIS requests that any OASIS Party or any other party that believes it has patent claims that would necessarily be infringed by implementations of this OASIS Committee Specification or OASIS Standard, to notify OASIS TC Administrator and provide an indication of its willingness to grant patent licenses to such patent claims in a manner consistent with the IPR Mode of the OASIS Technical Committee that produced this specification.

OASIS invites any party to contact the OASIS TC Administrator if it is aware of a claim of ownership of any patent claims that would necessarily be infringed by implementations of this specification by a patent holder that is not willing to provide a license to such patent claims in a manner consistent with the IPR Mode of the OASIS Technical Committee that produced this specification. OASIS may include such claims on its website, but disclaims any obligation to do so.

OASIS takes no position regarding the validity or scope of any intellectual property or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; neither does it represent that it has made any effort to identify any such rights. Information on OASIS' procedures with respect to rights in any document or deliverable produced by an OASIS Technical Committee can be found on the OASIS website. Copies of claims of rights made available for publication and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this OASIS Committee Specification or OASIS Standard, can be obtained from the OASIS TC Administrator. OASIS makes no representation that any information or list of intellectual property rights will at any time be complete, or that any claims in such list are, in fact, Essential Claims.

The names "OASIS" and "XLIFF" are trademarks of OASIS, the owner and developer of this specification, and should be used only to refer to the organization and its official outputs. OASIS welcomes reference to, and implementation and use of, specifications, while reserving the right to enforce its marks against misleading uses. Please see http://www.oasis-open.org/who/trademark.php for above guidance.

Table of Contents

1. Introduction

1.1. Transitional and Strict

2. General Structure

2.1. Header

2.2. Body

2.3. Named Groups

2.4. Inline Elements

2.5. Extensibility

2.5.1. Adding Elements

2.5.2. Adding Attributes

2.5.3. Adding Attribute Values

2.5.4. Validating Documents with Extensions

2.6. Embedding XLIFF

2.7. Non equivalent translations

2.8. Grouping translations across <trans-unit> elements

2.9. Segmentation

3. Detailed Specifications

3.1. XML Declaration

3.2. Elements

3.2.1. Top-level and Header Elements

3.2.2. Named Group Elements

3.2.3. Structural Elements

3.2.4. Inline Elements

3.2.5. Delimiter Element

3.3. Attributes

3.3.1. XLIFF Attributes

3.3.2. XML Namespace Attributes

A. XLIFF Tree Structure

B. Schema

C. Changes Since Previous Version (Non-Normative)

D. Naming Guidelines (Non-Normative)

E. XLIFF Technical Committee (Non-Normative)

F. References


1. Introduction

XLIFF is the XML Localization Interchange File Format designed by a group of software providers, localization service providers, and localization tools providers. It is intended to give any software provider a single interchange file format that can be understood by any localization provider. It is loosely based on the OpenTag version 1.2 specification and borrows from the TMX 1.2 specification. However, it is different enough from either one to be its own format.

1.1 Transitional and Strict

XLIFF is specified in two "flavors". Indicate which of these variants you are using by selecting the appropriate schema. The schema may be specified in the XLIFF document itself or in an OASIS catalog. The namespace is the same for both variants. Thus, if you want to validate the document, the tool used knows which variant you are using. Each variant has its own schema that defines which elements and attributes are allowed in certain circumstances.

As newer versions of XLIFF are approved, sometimes changes are made that render some elements, attributes or constructs in older versions obsolete. Obsolete items are deprecated and should not be used even though they are allowed. The XLIFF specification details which items are deprecated and what new constructs to use.

2. General Structure

XLIFF is an XML application, as such it begins with an XML declaration. After the XML declaration comes the XLIFF document itself, enclosed within the <xliff> element. An XLIFF document is composed of one or more sections, each enclosed within a <file> element. The <file> element consists of a <header> element, which contains metadata about the <file> , and a <body> element, which contains the extracted translatable data from the <file>. The translatable data within <trans-unit> elements is organized into <source> and <target> paired elements. These <trans-unit> elements can be grouped recursively in <group> elements.

In addition, XLIFF provides the ability to maintain information about the processing of the file via the <phase> element. Possible translations for a specific <source> element can be generated from any number of MT (Machine Translation) and CAT (Computer Assisted Translation) systems and stored near the <source> in <alt-trans> elements. Context for a <source> that could be used by a translator or a TM (Translation Memory) system is provided by the <context> element. Binary data can be made available via the <bin-unit>, which may also be translated and contain an associated <trans-unit> .

It is strongly recommended that content within the <file> element be uniformly bilingual. In other words, each <source> and <target> element that is a child of <trans-unit> is of the same language as the source-language and target-language attributes of the <file> element, respectively. The xml:lang attribute should not be used in those elements. The exception is that <source> and <target> elements that are children of <alt-trans> may contain an xml:lang attribute of a different language than that of the source-language and target-language attributes of the <file> element.

<xliff version='1.2'
       xmlns='urn:oasis:names:tc:xliff:document:1.2'>
<file original='hello.txt' source-language='en' target-language='fr'
       datatype='plaintext'>
<body>
<trans-unit id='hi'>
<source>Hello world</source>
<target>Bonjour le monde</target>
<alt-trans>
<target xml:lang='es'>Hola mundo</target>
</alt-trans>
</trans-unit>
</body>
</file>
</xliff>

The complete tree structure is available in Appendix A.

2.1. Header

The XLIFF <header> contains metadata about the file and the localization process. It contains the <skl>, <phase-group>, <glossary>, <reference>, <count-group>, <tool>, <prop-group>, and <note> elements. The <skl> element contains either a skeleton file of the file submitted for localization or a hypertext link to that file.

The <phase-group> element contains information about each processing phase used in localizing the file; references to these phases are stored along with the translations. The <glossary> and <reference> elements may contain hypertext links to a glossary and reference file, respectively, or the actual glossary and reference data that can be used in the localization process.

The <count-group> element is a grouping element of count information of the entire file. The <prop-group> element (deprecated) contains tool-specific information used in combining the data with the skeleton file or storing the data in a repository. The <note> element contains instructions for the localization process. The <count-group>, <prop-group>, and <note> elements can also appear in the body of the file.

2.2. Body

The XLIFF <body> contains the structure and the localizable content from the file. It contains the <group>, <trans-unit> and <bin-unit> elements. The structure is described using the <group>, <trans-unit>, <bin-unit> elements. The <group> element is a general purpose structural element used in describing the hierarchy of the file; it can contain other <group> elements as children as well as <trans-unit> and <bin-unit> elements.

The <trans-unit> and <bin-unit> elements contain the translatable portions of the document. The <trans-unit> element contains the text to be translated, the translations, and other related information. The <bin-unit> contains binary data that may or may not need to be translated; it also can contain translated versions of the binary object as well as other related information.

In the <trans-unit> element the text to be translated is contained in a <source> element. This element may contain inline elements that either remove the codes from the source (<g>, <x/>, <bx/> , <ex/>) or that mask off codes left inline (<bpt>, <ept>, <sub> , <it>, <ph>). The translated text is contained in a <target> element that has the same inline codes available to it as does the <source> element. Translation matches generated by a TM or MT or entered by a translator may be provided in an <alt-trans> element, which also contains the <source> and <target> elements.

At every structural level contextual information for the localization process can be provided by the <context-group> named group element, count information by the <count-group> named group element, and tool-specific information by the <prop-group> named group element (deprecated).

2.3. Named Groups

XLIFF allows grouping of certain elements into named groups. A named group is simply a grouping element with a name attribute. These named groups can be interspersed throughout the file with information designed for specific purposes. Using XML processing instructions different actions can be performed with specific named groups. The named group elements are <context-group>, <count-group> and <prop-group> (deprecated).

The <count-group> element contains counts of words, translations, dialogs, or anything else that may need to be counted in the file. A different named group could be stored by the client, translator, reviewer, and localization engineer. Processing instructions could inform a system which of these <count-group> to update during the localization process.

The <prop-group> element contains tool specific data that can be used in creating the translated file, storing the translations, and any other specific task. Processing instructions can indicate to the tools which named <prop-group> to use when updating the repository or combining the localized data with the skeleton file to create a translated file. Note that the <prop-group> has been deprecated since version 1.1.

2.4. Inline Elements

The content of the <source> and the <target> elements can include one or more inline elements (also called "content markup"). Those elements are used to represent codes that reside within the source or target text, for example the formatting codes to mark a section of a sentence in bold.

There are three different types of inline elements:

  1. Elements that have a content, and for which this content is the actual native code of the original data (escaped for XML if necessary). These elements are: <bpt>, <ept>, <it>, and <ph> .
  2. Elements that are empty and act as placeholders for a native code that is either in the Skeleton file or generated automatically. These elements are: <g>, <bx/>, <ex/> , and <x/>.
  3. The <sub> element, which can be inside <bpt>, <ept>, <it>, and <ph> to delimit a translatable run of text within a native inline code, for example the value of an ALT attribute in a <IMG> element in HTML.

The first two types of inline elements can be classified into three main categories depending on their function, and regardless the method they use to hold the native codes:

A) Codes that either begin or end an instruction, and whose beginning and ending functions both appear within a translation unit. For example, an instruction to begin embolden for a range of words which is then followed in the same translation unit by an instruction to end bold formatting. The elements that can handle such cases are: <bpt>, <ept>, <g>, <bx/>, and <ex/> .

B) Codes that either begin or end an instruction, but whose beginning and ending functions are not both contained within a single translation unit. For example, an instruction to embolden text may apply to the first of three sentences in a paragraph contained within a single translation unit, but the instruction to turn off bolding may only appear at the end of the third sentence. Its beginning instruction is present in the first translation unit, while its closing tag is present in the third translation unit. The elements that can handle such cases are: <it> and <x/>.

C) Codes that represent self-contained functions that do not require explicit ending instructions. Images or cross-reference tokens are examples of these standalone codes. The elements that can handle such cases are: <ph> and <x/>.

The guidelines for using the inline elements are as follows:

As XLIFF inline elements are closely related to TMX inline elements, further examples of usage of these tags may be found in their specification's Content Markup section.

Inline elements are normally treated as being transparent with regard to lexical processing such as segmentation or word tokenisation. If the inline element also represents a lexical function, such as implying spacial characteristics or a string of characters or symbols, then the equiv-text attribute must be used to denote any such lexical characteristics.

For example:

<p>This HTML break element<br/>is not followed by a white space character</p>
    

is represented in an XLIFF document as:

<source>This HTML break element<x id="x1" ctype="x-html-br" equiv-text=" "/>is not followed
by a white space character.</source>
    

2.5. Extensibility

At times, it may be useful to extend the set of information available in an XLIFF document by inserting constructs defined in various other XML vocabularies. You can add non-XLIFF elements, as well as attributes and attribute values. Adding elements and attributes use the namespace mechanism [ XML Names]. Adding attribute values generally involves preceding the value by an "x-" (e.g. <context context-type='x-for-engineers'>).

Although XLIFF offers this extensibility mechanism, in order to avoid a nimiety of information and increase interoperability between tools, it is strongly recommended to use XLIFF capabilities whenever possible, rather than to create non-standard user-defined elements or attributes.

2.5.1. Adding Elements

XLIFF provides several extension points in the following elements: <alt-trans>, <bin-unit>, <group>, <header>, <tool>, <trans-unit>, and <xliff>.

Several non-XLIFF elements can be used at each extension point. The content of each element can be any valid XML content (empty content, PCDATA, mixed content, and so forth).

For example, the following XLIFF code shows how to add user-defined elements (in bold) within an XLIFF document:

<xliff version='1.2'
             xmlns='urn:oasis:names:tc:xliff:document:1.2'
             xmlns:sup='http://www.ChaucerState.ac.pg/Frm/XLFSup-v1'>
<file original='passus-1.doc' source-language='enm' datatype='plaintext'>
<group>
<sup:SourceInfo>
<sup:Book>Piers Plowman, Passus 1</sup:Book>
<sup:Author>William Langland</sup:Author>
</sup:SourceInfo>
<sup:WorkInfo Task='transcription' Context='Middle-English:1360'/> 
<trans-unit id='1'>
<source xml:lang='enm'>What this mountaigne bymeneth</source>
<target xml:lang='en'>What this mountain means</target>
<sup:Reference Type='strophe'>1-a</sup:Reference> 
</trans-unit>
<trans-unit id='2'>
<source xml:lang='enm'>and the merke dale</source>
<target xml:lang='en'>and the dark dale</target>
<sup:Reference Type='strophe'>1-b</sup:Reference> 
</trans-unit>
<trans-unit id='3'>
<source xml:lang='enm'>And the feld ful of folk</source>
<target xml:lang='en'>And the field full of folk</target>
<sup:Reference Type='strophe'>2-a</sup:Reference>
</trans-unit>
<trans-unit id='4'>
<source xml:lang='enm'>I shal yow faire shewe.</source>
<target xml:lang='en'>I fairly will show.</target>
<sup:Reference Type='strophe'>2-b</sup:Reference>
</trans-unit>
</group>
</file>
</xliff>

The non-XLIFF elements used in the example above would be defined as the following:

<xsd:schema targetNamespace="XLFSup-v1"
             xmlns:xsd="http://www.w3.org/2001/XMLSchema"
             xmlns:sup="http://www.ChaucerState.ac.pg/Frm/XLFSup-v1"
            elementFormDefault="qualified" attributeFormDefault="unqualified">
<xsd:element name="SourceInfo">
<xsd:complexType>
<xsd:sequence maxOccurs="unbounded"> <xsd:element name="Book" type="xsd:string"/> <xsd:element name="Author" type="xsd:string"/> </xsd:sequence>
</xsd:complexType> </xsd:element> <xsd:element name="WorkInfo"> <xsd:complexType> <xsd:attribute name="Task" type="xsd:string"/> <xsd:attribute name="Context" type="xsd:string"/> </xsd:complexType> </xsd:element> <xsd:element name="Reference"> <xsd:complexType> <xsd:simpleContent> <xsd:extension base="xsd:string">Struct_InLine <xsd:attribute name="Type" type="xsd:string"/> </xsd:extension> </xsd:simpleContent> </xsd:complexType> </xsd:element> </xsd:schema>

It is not possible to add non-XLIFF elements in either the <source> or <target> elements. However, the <mrk> element can be used to markup sections of the text with user-defined values assigned to the mtype attribute. You can also add non-XLIFF attributes to most of the inline elements used in <source> and <target>.

2.5.2. Adding Attributes

Attributes of a namespace different than XLIFF can be included in several XLIFF elements.

The following elements allow non-XLIFF attributes: <alt-trans>, <bin-source>, <bin-target>, <bin-unit>, <bpt>, <bx/>, <ept> , <ex/>, <file>, <g> , <group>, <it>, <mrk> , <ph>, <seg-source>, <source>, <target>, <tool>, <trans-unit>, <x/>, and <xliff>.

For instance, the following XLIFF code illustrates how to use attributes from the XHTML vocabulary (in bold) in the <group> and <trans-unit> XLIFF elements. The example shows how to carry formatting information about an extracted table:

<xliff version='1.2'
            xmlns='urn:oasis:names:tc:xliff:document:1.2'
            xmlns:htm='http://www.w3.org/1999/xhtml'>
<file original='table.htm' source-language='en' datatype='html'>
<group restype='table' htm:border='1' htm:cellpadding='5'
htm:cellspacing='0' htm:width='100%'>
<group restype='row'>
<trans-unit id='1' htm:valign='top' htm:width='30%'>
<source>Text of row 1 column 1</source>
</trans-unit>
<trans-unit id='2' htm:valign='top' htm:width='30%'>
<source>Text of row 1 column 2</source>
</trans-unit>
</group> <group restype='row'> <trans-unit id='3' htm:valign='top' htm:width='30%'> <source>Text of row 2 column 1</source> </trans-unit> <trans-unit id='4' htm:valign='top' htm:width='30%'> <source>Text of row 2 column 2</source> </trans-unit> </group> </group> </file> </xliff>

In each of the XLIFF elements allowing non-XLIFF attributes: there is no specific location where to insert the non-XLIFF attributes, and there is no limit to the number of non-XLIFF attributes that can be used.

2.5.3. Adding Attribute Values

Many attributes in XLIFF offer a list of enumerated values. Some applications may find it necessary to add user-defined values to these lists. XLIFF allows for such extension.

The attributes where the list of values can be extended are the following: alttranstype, context-type, count-type, ctype, datatype, mtype, purpose, reformat, restype, size-unit, state, state-qualifier , and unit .

User-defined values must start with an "x-" prefix. There is no specified mechanism to validate individual user-defined values. The XLIFF schema will allow any value starting with "x-" in addition to the pre-defined values.

For example, the following excerpt shows how the user-defined value x-for-engineer can be utilized in a document:

...
<group>
<context-group name='EngineersData'>
<context context-type='x-for-engineers'>Data...</context>
...

2.5.4. Validating Documents with Extensions

In order to validate an XLIFF document that contains non-XLIFF parts, you can use the schema validation mechanism: In addition to the namespace declarations, add the schemaLocation attribute of the XML Schema-instance namespace to define what schemas to use to validate the document (XLIFF and the non-XLIFF namespaces).

Note: XLIFF 1.2 XML Schemas set the attribute processContents to value "skip", so the only validation requirement for non-XLIFF content is to ensure it is well-formed.

<xliff version='1.2'
        xmlns='urn:oasis:names:tc:xliff:document:1.2'
xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'
xsi:schemaLocation='
urn:oasis:names:tc:xliff:document:1.2 xliff-core-1.2.xsd http://www.ChaucerState.ac.pg/Frm/XLFSup-v1 XLFSup-v1.xsd'
> ... </xliff>

See http://www.w3.org/XML/Schema for more information on XML Schema and validation.

2.6. Embedding XLIFF

XML Namespace provides a convenient mechanism to use XLIFF constructs within another XML vocabulary.

If necessary an XLIFF document, or parts of a document, can be embedded within another XML document. The only requirement for this is on the side of the XML format that includes the XLIFF data. For the document to be valid, the schema of the given document type must include a definition for external elements.

If the including XML format uses XML Schema, it should include an <any> element in the definition of the element where the XLIFF data can be inserted. For example, the following XSD excerpt illustrates the case of an element type dataBlockType that can contain zero, one or more XLIFF constructs after a mandatory <type> element:

...
<xsd:complexType name="dataBlockType">
<xsd:sequence>
<xsd:element name="type" type="string" minOccurs="0"/>
<xsd:any namespace="##other" processContents="strict" minOccurs="0" maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
...

The ways of inserting different vocabulary in an XML document using XSD are described in section "Any Element, Any Attribute" in the document "XML Schema Part 0: Primer" available here: http://www.w3.org/TR/xmlschema-0/#any.

2.7 Non equivalent translations

Linguistically complete text may have to be broken into a number of <trans-unit> elements due to message size constraints or other reasons. In these instances the translator is not providing an equivalent translation for each <source>, but rather fitting in the target language text over a number of <trans-unit> <source> / <target> pair elements to meet the requirements of the target application.

Example:

<trans-unit id="t1">
<source>Constrained text for limited</source>
<target>Tekst angielski dla</target>
</trans-unit>
<trans-unit id="t2">
<source>display for English</source>
<target>ograniczonego pola</target>
</trans-unit>

In this circumstance the equiv-trans attribute for the <target> element is used to denote that the translation should not be regarded as a direct translation of the <source> element. The attribute is optional, and default value is "yes". The other possible value will be "no" to indicate that the translation in <target> for the given <source> is not a direct equivalent linguistically of the source language text. The following example demonstrates the use of the equiv-trans attribute:

<trans-unit id="t1"> 
<source>Constrained text for limited</source>
<target equiv-trans="no">Tekst angielski dla</target>
</trans-unit>
<trans-unit id="t2">
<source>display for English</source>
<target equiv-trans="no">ograniczonego pola</target>
</trans-unit>  

2.8 Grouping translations across <trans-unit> elements

It is inevitable that individual XLIFF <trans-unit> elements may not represent a piece of text that can be translated without reference to one or more following <trans-unit> elements. The causes for this may be incorrect segmentation or bad document design.

Example:

<trans-unit id="t1"> 
   <source>The German acronym v.</source>
   <target>Niemiecki skrót v. OT oznacza górną pozycję silnika.</target>
</trans-unit>
<trans-unit id="t2">
   <source> OT signifies the top dead center position for an engine.</source>
   <target/>
</trans-unit>

In these cases the merged-trans attribute for the <group> element can be used to denote that the individual <trans-unit> elements cannot be regarded as a direct translation, but rather need to be treated linguistically as a merged group. This attribute has two possible values: "yes" or "no". The default value is "no". A value of "yes" indicates that the <trans-unit> elements contained within this <group> element are to be treated together for linguistic purposes. All <trans-unit> elements that are encompassed by a <group> element that has its merged-trans attribute set to "yes" normally have their related <target> equiv-trans attribute set to the value of "no". The text of all of the <source> and <target> elements taken together form one linguistic whole. No requirements are made regarding the distribution of the translation in the <target> elements. This will be governed by the requirements of the individual applications. The translated text may be placed within the first <target> element leaving the following <target> elements blank, or distributed among the <target> elements contained within the merged-trans attribute of the <group> element. The following example demonstrates the use of the merged-trans attribute for the <group> element:

<group merged-trans="yes">
<trans-unit id="t1">
<source>The German acronym v.</source>
<target equiv-trans="no">Niemiecki skrót v. OT oznacza górną pozycję silnika.</target>
</trans-unit>
<trans-unit id="t2">
<source> OT signifies the top dead center position for an engine.</source>
<target equiv-trans="no"/>
</trans-unit>
</group>

2.9 Segmentation

During some operations, such as translation and leveraging, it may be important for the user agent to break down the content of the <source> into smaller runs of text (for example, sentences). These smaller parts of text are called segments. The process of breaking down a text into segments is known as segmentation. It is important to note that the manipulation / segmentation of trans-unit elements is owned by the "translator" domain, not at the extraction filter domain. This means that segmentation will be performed by the editing tool or possibly an automated segmentation process.

In order to avoid modifying the content of the original <source> element, during segmentation a new element <seg-source> is introduced. The content of the <seg-source> element is the same as the content of the <source> element, but with segmentation markup. The segmentation markup is also transferred to the <target> element as applicable during translation.

Each segment inside the <seg-source> and <target> content is represented using the <mrk> element with attribute mtype set to the value "seg". For example the following <source> element contains three segments. After segmentation the content may look as follows:

<source>Richard stepped out of the kitchen hut. He noticed a movement from the corner of his
eye. A monkey had climbed on top of one of the workshop sheds, trying to get in by the 
ventilation shaft.</source>
<seg-source><mrk mtype="seg">Richard stepped out of the kitchen hut.</mrk>
<mrk mtype="seg">He noticed a movement from the corner of his eye.</mrk>
<mrk mtype="seg">A monkey had climbed on top of one of the workshop sheds, trying to get in
 by the ventilation shaft.</mrk>
</seg-source>

Note that it may be advisable for XLIFF processing tools to add any missing opening or closing tags when exporting standalone segments outside the original XLIFF document.

Non-clonable <g> elements introduce a problem for localisation in general and segmentation in particular when the non-clonable <g> elements content spans more than single words or isolated expressions. In this form they represent localisation-unfriendly content and are very likely to cause difficulties during translation. Being able to break a segment inside such an element may be the smallest of the problems that tools would be faced with. A non-clonable <g> element clearly represents a piece of content that must be translated as one piece, and cannot be segmented.

Example: This example shows how content with clonable <g> may be localised:

<source>This is a <g>sentence. It has</g> markup.</source>

The translation into "Yoda-English" would be:

<target>A <g>sentence</g> this is. Markup <g>it has</g>.</target>

In this example the <g> element is clonable, and can be localised correctly. However, in the case where cloning is not possible, the resulting content cannot be correctly localised, and is in fact irrespective of whether segments are introduced here or not.

If matching segments need to be identified between <seg-source> and <target>, and/or between <seg-source> content and corresponding <alt-trans> units, the mid attribute should be used for this purpose.

Example: This example shows how corresponding segments are referenced between <seg-source> and <target> elements in a <trans-unit>.

<trans-unit id= "1">
<source>First sentence.Second sentence.</source>
<seg-source>
<mrk mtype="seg" mid="1">First sentence.</mrk>
<mrk mtype="seg" mid="2">Second sentence.</mrk>
</seg-source>
<target>
<mrk mtype="seg" mid="1">Translated first sentence.</mrk>
<mrk mtype="seg" mid="2">Translated second sentence.</mrk>
</target>
</trans-unit> 

Example: In the following <trans-unit> the <alt-trans> represents a 75% fuzzy match for the second segment in the <seg-source>. This is indicated by introducing the mid="2" attribute on the <alt-trans>.

<trans-unit id= "2">
<source>First sentence.Second sentence.</source>
<seg-source>
<mrk mtype="seg" mid="1">First sentence.</mrk>
<mrk mtype="seg" mid="2">Second sentence.</mrk>
</seg-source>
<alt-trans mid="2" match-quality="75%">
<source>The second sentence.</source>
<target>The translated second sentence.</target>
</alt-trans>
</trans-unit> 

Example: An <alt-trans> element may also have segmented content:

<trans-unit id="3">
<source>The second sentence.</source>
<alt-trans match-quality="50%">
<source>First sentence. Second sentence.</source>
<seg-source>
<mrk mtype="seg" mid="1">First sentence.</mrk>
<mrk mtype="seg" mid="2">Second sentence.</mrk>
</seg-source>
<target>
<mrk mtype="seg" mid="1">Translated first sentence.</mrk>
<mrk mtype="seg" mid="2">Translated second sentence.</mrk>
</target>
</alt-trans>
</trans-unit> 

3. Detailed Specifications

3.1. XML Declaration

The XML declaration is strongly recommended. It indicates the XML version and sets the defaults for the encoding of the file. For example, the following declaration specifies the document is in ISO 8859-1, the Latin-1 encoding.

<?xml version="1.0" encoding="iso-8859-1"?>

As in all XML files, the default encoding for an XLIFF file is assumed to be either UTF-8, which is a superset of the 7-bit ASCII character set, or UTF-16, which is UCS-2 with surrogate pairs for code points above U+FFFF. Thus, for these character sets, the encoding declaration is not necessary. Further, all XML parsers support these encodings. If the encoding is in UTF-16 the first character of the file must be the Unicode Byte-Order-Mark, U+FEFF, which indicates the endianness of the file. Other encodings may be desirable and may be generally supported by XML parsers. These must be declared using the encoding declaration. The values to use for the encoding declaration are defined in the [IANA Charsets] listing.

If necessary, you can also specify a namespace for XLIFF. The namespace identifier for this standard is "urn:oasis:names:tc:xliff:document:1.2".

A minimal XLIFF document with one entry looks something like this:

<?xml version="1.0"?>
<xliff version="1.2">
<file source-language="EN" datatype="plaintext" original="file.ext">
<body>
<trans-unit id="1">
<source>Hello World!</source>
</trans-unit>
</body>
</file>
</xliff>

If you need to validate the document, use the schema validation mechanism: In addition to the namespace declarations, add the schemaLocation attribute of the XML Schema-instance namespace to define what schema files to use. The same example as above would then look like this:

<?xml version="1.0"?>
<xliff version='1.2'
             xmlns='urn:oasis:names:tc:xliff:document:1.2'
             xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'
             xsi:schemaLocation='
             urn:oasis:names:tc:xliff:document:1.2 xliff-core-1.2.xsd'>
<file source-language="EN" datatype="plaintext" original="file.ext">
<body>
<trans-unit id="1">
<source>Hello World!</source>
</trans-unit>
</body>
</file>
</xliff>

If a document of a previous compatible version of XLIFF is to be validated with the schema of a newer version, the document should use the same mechanism.

For validating documents that include non-XLIFF namespaces see the section Validating Documents with Extensions.

3.2. Elements

XLIFF elements can be divided into five main categories: the top-level and header elements, the named group elements, the structural elements, the inline elements, and the delimiter elements. Attributes are shared among them.

Top Level and Header elements <xliff>, <file>, <header>, <skl>, <external-file>, <internal-file>, <glossary>, <reference> , <phase-group>, <phase>, <tool>, <note>.
Named Group Elements <context-group>, <context>, <count-group> , <count>, <prop-group> , <prop>.
Structural elements <body>, <group>, <trans-unit>, <source>, <target>, <bin-unit>, <bin-source>, <bin-target> , <alt-trans> .
Inline elements <g>, <x/>, <bx/>, <ex/>, <bpt>, <ept>, <sub>, <it>, <ph>.
Delimiter element <mrk>.

3.2.1. Top-level and Header Elements

The top-level and header elements are the following:

<xliff>

XLIFF document - The <xliff> element encloses all the other elements of the document. The required version attribute specifies the version of XLIFF. The optional xml:lang attribute is used to specify the language of the content of the document.

Required attributes:

version.

Optional attributes:

xml:lang, non-XLIFF attributes

Contents:

One or more <file> elements, followed by
Zero, one or more non-XLIFF elements.

<file>

File - The <file> element corresponds to a single extracted original document. The required original attribute specifies the name of the file from which this file content is derived. The required datatype attribute specifies the format of the original file; e.g. "html". The required source-language attribute specifies the language of the <source> content. The optional target-language attribute is used to specify the language of the <target> content. The optional tool-id attribute accepts the id of the <tool> used to generate this XLIFF document. The optional date attribute is used to specify the creation date of this XLIFF file. The optional xml:space attribute is used to specify how white-spaces are to be treated. The optional category attribute is used to specify a general category of the content of the file; e.g. "medical". The optional product-name attribute is used to specify the name of the product which uses this file. The optional product-version and build-num attributes are used to specify the revision of the product from which this file comes. The tool and ts attributes have been deprecated in XLIFF 1.1.

Required attributes:

original, source-language, datatype.

Optional attributes:

tool, tool-id, date, xml:space, ts, category, target-language, product-name, product-version, build-num, non-XLIFF attributes

Contents:

Zero or one <header> element, followed by
One <body> element.

<header>

File header - The <header> element contains metadata relating to the <file> element.

Required attributes:

None.

Optional attributes:

None.

Contents:

zero or one <skl> element, followed by
zero or one <phase-group> element, followed by
zero, one or more <glossary>, <reference>, <count-group>, <prop-group>, <note>, <tool> elements, in any order, followed by
Zero, one or more non-XLIFF elements.

While for backward compatibility reasons no order is enforced for the elements before the non-XLIFF elements, the recommended order is the one in which they are listed here.

<skl>

Skeleton file - The <skl> element contains the skeleton file or the location of the skeleton file. The skeleton file is a template that can be used in recreating the original file, from the <source> content, or the translated file, from the <target> content.

Required attributes:

None.

Optional attributes:

None

Contents:

Either exactly one <internal-file> or one <external-file> element.

<internal-file>

Internal file - The <internal-file> element contains the actual file being referenced. It is a child of the <skl> , <glossary>, and <reference> elements. The format of the file is specified by the optional form attribute, which accepts mime-type values. The crc attribute accepts a value that can be used to precisely identify and assure the authenticity of the file.

Required attributes:

None.

Optional attributes:

form, crc.

Contents:

An embedded file.

<external-file>

External file - The <external-file> element specifies the location of the actual file being referenced. The required href attribute provides a URI to the file. The crc attribute accepts a value that can be used to precisely identify and assure the authenticity of the file. The uid attribute allows a unique ID to be assigned to the file.

Required attributes:

href.

Optional attributes:

uid, crc.

Contents:

The <external-file> is an empty element, including attributes only.

<glossary>

Glossary - The <glossary> element points to or contains a glossary, which can be used in the localization of the file.

Required attributes:

None.

Optional attributes:

None.

Contents:

The glossary description and either exactly one <internal-file> or one <external-file> element.

<reference>

Reference - The <reference> element points to or contains reference material, which can aid in the localization of the file.

Required attributes:

None.

Optional attributes:

None.

Contents:

A description of the reference material and either exactly one <internal-file> or one <external-file> element.

<note>

Note - The <note> element is used to add localization-related comments to the XLIFF document. The content of <note> may be instructions from developers about how to handle the <source>, comments from the translator about the translation, or any comment from anyone involved in processing the XLIFF file. The optional xml:lang attribute specifies the language of the note content. The optional from attribute indicates who entered the note. The optional priority attribute allows a priority from 1 (high) to 10 (low) to be assigned to the note. The optional annotates attribute indicates if the note is a general note or, in the case of a <trans-unit>, pertains specifically to the <source> or the <target> element.

Required attributes:

None.

Optional attributes:

xml:lang, from, priority, annotates .

Contents:

Text, no standard elements.

<phase-group>

Phase group - The <phase-group> element contains information about the task that has been performed on the file. This phase information is specific to the tools and workflow used in processing the file.

Required attributes:

None.

Optional attributes:

None.

Contents:

One or more <phase> elements.

<phase>

Phase information - The <phase> element contains metadata about the tasks performed in a particular process. The required phase-name attribute uniquely identifies the phase for reference within the <file> element. The required process-name attribute identifies the kind of process the phase corresponds to; e.g. "proofreading". The optional company-name attribute identifies the company performing the task. The optional tool-id attribute references the <tool> used in performing the task. The optional date attribute provides a timestamp indicating when the task was performed. The optional job-id attribute allows an ID to be assigned to the job. The optional contact-name, contact-email, and contact-phone attributes all refer to the person performing the task.

Required attributes:

phase-name, process-name.

Optional attributes:

company-name, tool, tool-id, date, job-id, contact-name, contact-email, contact-phone.

Contents:

Zero, one or more <note> elements.

<tool>

Tool - The <tool> element describes the tool that has been used to execute a given task in the document. The required tool-id attribute uniquely identifies the tool for reference within the <file> element. The required tool-name attribute specifies the actual tool name. The optional tool-version attribute provides the version of the tool. The optional tool-company attribute provides the name of the company that produced the tool.

Required attributes:

tool-id, tool-name.

Optional attributes:

tool-version, tool-company, non-XLIFF attributes

Contents:

Zero, one or more non-XLIFF elements.

3.2.2. Named Group Elements

The named group elements are the following:

<count-group>

Count group - The <count-group> element holds count elements relating to the level in the tree in which it occurs. Each group for <count> elements must be named, allowing different uses for each group. The required name attribute uniquely identifies the <count-group> within the <file> element.

Required attributes:

name.

Optional attributes:

None.

Contents:

One or more <count> elements.

<count>

Count - The <count> element contains information about counts. For each <count> element the required count-type attribute indicates what kind of count the element represents, and the optional unit attribute indicates the unit of the count (by default: word). A list of values for count-type and unit is provided. The optional phase-name attribute references the <phase> in which the count was produced.

Required attributes:

count-type.

Optional attributes:

phase-name, unit.

Contents:

Number (the count value).

<context-group>

Context group - The <context-group> element holds context elements relating to the level in the tree in which it occurs. Thus context can be set at a <group> level, a <trans-unit> level, or a <alt-trans> level. Each <context-group> element may be named, allowing different uses for each group. When the <context-group> is named, these uses can be controlled through the use of XML processing instructions. Because the <context-group> element may occur at a very high level, a default context can be established for all <trans-unit> elements within a file. This default can be overridden at many subsequent levels. The optional name attribute may uniquely identify the <context-group> within the <file> element. The optional crc attribute allows a verification of the data. The optional purpose attribute indicates to what use this context information is used; e.g. "match" indicates the context information is for memory lookups.

Required attributes:

None.

Optional attributes:

crc, name, purpose

Contents:

One or more <context> elements.

<context>

Context - The <context> element describes the context of a <source> within a <trans-unit> or a <alt-trans>. The purpose of this context information is to allow certain pieces of text to have different translations depending on where they came from. The translation of a piece of text may differ if it is a web form or a dialog or an Oracle form or a Lotus form for example. This information is thus required by a translator when working on the file. Likewise, the information may be used by any tool proposing to automatically leverage the text successfully.

The required context-type attribute indicates what the context information is; e.g. "recordtitle" indicates the name of a record in a database. The optional match-mandatory attribute indicates that translations of the <source> elements within the scope of this context must have the same context. The optional crc attribute allows a verification of the data.

Required attributes:

context-type.

Optional attributes:

match-mandatory , crc.

Contents:

Text, no standard elements.

<prop-group>

Property group - The <prop-group> element contains <prop> elements. Each <prop-group> element may be named, allowing different uses for each group. These uses can be controlled through the use of XML processing instructions.

Important: The <prop-group> element was DEPRECATED in version 1.1. Instead, use attributes defined in a namespace different from XLIFF. See the Extensibility section for more information.

Required attributes:

None.

Optional attributes:

name.

Contents:

One or more <prop> elements.

<prop>

Property - The <prop> element allows the tools to specify non-standard information in the XLIFF document. This information can be used by the tools that have produced the file or that translate the file or that do any other amount of processing specific to the producer.

Important: The <prop> element was DEPRECATED in version 1.1. Instead, use attributes defined in a namespace different from XLIFF. See the Extensibility section for more information.

Required attributes:

prop-type.

Optional attributes:

xml:lang.

Contents:

Tool-specific data or text, no standard elements.

3.2.3. Structural Elements

The structural elements specify the frame of a XLIFF document as well as contextual and processing information. The <source> element contains the extracted data and, possibly, inline elements.

<body>

File body - The <body> element contains the content from the file.

Required attributes:

None.

Optional attributes:

None.

Contents:

Zero, one or more <group> , <trans-unit>, <bin-unit> elements, in any order.

<group>

Group - The <group> element specifies a set of elements that should be processed together. For example: all the items of a menu, etc. Note that a <group> element can contain other <group> elements. The <group> element can be used to describe the hierarchy of the file.

The optional id attribute is used to uniquely identify the <group> within the same <file>. The optional datatype attribute specifies the data type of the content of the <group>; e.g. "winres" for Windows resources. The optional xml:space attribute is used to specify how white-spaces are to be treated within the <group>. The optional restype, resname, extradata, help-id, menu , menu-option, menu-name, coord, font, css-style, style, exstyle, and extype attributes describe the resources contained within the <group>. The optional translate attribute provides a default value for all <trans-unit> elements contained within the <group>. The optional reformat attribute specifies whether and which attributes can be modified for the <target> elements of the <group>. The optional maxbytes and minbytes attributes specify the required maximum and minimum number of bytes for the translation units within the <group>. The optional size-unit attribute determines the unit for the optional maxheight, minheight, maxwidth, and minwidth attributes, which limit the size of the resource described by the <group>. The optional charclass attribute restricts all translation units in the scope of the <group> to a subset of characters. The optional merged-trans attribute indicates if the group element contains merged <trans-unit> elements. The optional ts attribute was DEPRECATED in XLIFF 1.1. Lists of values for the datatype, restype, and size-unit attributes are provided by this specification.

Required attributes:

None.

Optional attributes:

id, datatype, xml:space, ts, restype, resname, extradata, help-id, menu, menu-option , menu-name, coord, font, css-style, style, exstyle, extype, translate, reformat , maxbytes, minbytes, size-unit, maxheight, minheight, maxwidth , minwidth, charclass, merged-trans, non-XLIFF attributes

Contents:

Zero, one or more <context-group> elements, followed by
Zero, one or more <count-group> elements, followed by
Zero, one or more <prop-group> elements, followed by
Zero, one or more <note> elements, followed by
Zero, one or more non-XLIFF elements, followed by
Zero, one or more <group>, <trans-unit>, <bin-unit> elements, in any order.

All <context-group>, <count-group>, <prop-group>, <note> and non-XLIFF elements pertain to the subsequent elements in the tree but can be overridden within a child element.

<trans-unit>

Translation unit - The <trans-unit> elements contains a <source>, <target> and associated elements.

The required id attribute is used to uniquely identify the <trans-unit> within all <trans-unit> and <bin-unit> elements within the same <file>. The optional approved attribute indicates whether the translation has been approved by a reviewer. The optional translate attribute indicates whether the <trans-unit> is to be translated. The optional reformat attribute specifies whether and which attributes can be modified for the <target> element of the <trans-unit> . The optional xml:space attribute is used to specify how white-spaces are to be treated within the <trans-unit>. The optional datatype attribute specifies the data type of the content of the <trans-unit>; e.g. "winres" for Windows resources. The optional ts attribute was DEPRECATED in XLIFF 1.1. The optional phase-name attribute references the phase that the <trans-unit> is in. The optional restype, resname, extradata, help-id, menu, menu-option, menu-name , coord, font, css-style, style, exstyle, and extype attributes describe the resource contained within the <trans-unit>. The optional maxbytes and minbytes attributes specify the required maximum and minimum number of bytes for the text inside the <source> and <target> elements of the <trans-unit>. The optional size-unit attribute determines the unit for the optional maxheight, minheight, maxwidth, and minwidth attributes, which limit the size of the resource described by the <trans-unit>. The optional charclass attribute restricts all <source> and <target> text in the scope of the <trans-unit> to a subset of characters. Lists of values for the datatype, restype, and size-unit attributes are provided by this specification. During translation the content of the <source> element may be duplicated into a <seg-source> element, in which additional segmentation related markup is introduced. See the Segmentation section for more information.

Required attributes:

id.

Optional attributes:

approved, translate, reformat, xml:space , datatype, ts, phase-name , restype, resname, extradata , help-id, menu, menu-option , menu-name, coord, font, css-style, style, exstyle, extype, maxbytes, minbytes , size-unit, maxheight, minheight, maxwidth, minwidth , charclass, non-XLIFF attributes

Contents:

One <source> element, followed by
Zero or one <seg-source> element, followed by
Zero or one <target> element, followed by
Zero, one or more <context-group>, <count-group>, <prop-group>, <note>, <alt-trans> elements, in any order, followed by
Zero, one or more non-XLIFF elements.

All child elements of <trans-unit> pertain to their sibling <source> element.
While for backward compatibility reasons no order is enforced for the elements before the non-XLIFF elements, the recommended order is the one in which they are listed here.

<source>

Source text - The <source> element is used to delimit a unit of text that could be a paragraph, a title, a menu item, a caption, etc. The content of the <source> is generally the translatable text, depending upon the translate attribute of the parent <trans-unit>. The optional xml:lang attribute is used to specify the content language of the <source>; this should always match source-language as a child of <trans-unit> but can vary as a child of <alt-trans>. The optional ts attribute was DEPRECATED in XLIFF 1.1.

Required attributes:

None.

Optional attributes:

xml:lang, ts, non-XLIFF attributes

Contents:

Text,
Zero, one or more of the following elements: <g>, <x/>, <bx/>, <ex/>, <bpt> , <ept>, <ph>, <it> , <mrk>, in any order.

<target>

Target - The <target> element contains the translation of the content of the sibling <source> element. The optional state and state-qualifier attributes indicate in which state the <target> is. The optional phase-name attribute references the <phase> in which the <target> was last modified. The optional xml:lang attribute is used to specify the content language of the <target>; this should always match target-language as a child of <trans-unit> but can vary as a child of <alt-trans> . The optional coord, font, css-style, style, and exstyle attributes describe the resource contained within the <target>; these are the modifiable attributes for the <trans-unit> depending upon the reformat attribute of the parent <trans-unit>. The optional equiv-trans describes if the target language translation is a direct equivalent of the source text. The optional ts attribute was DEPRECATED in XLIFF 1.1. The restype attribute is DEPRECATED in XLIFF 1.2, since <target> will always be of the same restype as its parent <trans-unit> or <alt-trans>. A list of preferred values for the restype, state, and state-qualifier attributes are provided by this specification.

Required attributes:

None.

Optional attributes:

state, state-qualifier, phase-name, xml:lang, ts, restype, resname, coord, font, css-style, style, exstyle, equiv-trans, non-XLIFF attributes

Contents:

Text,
Zero, one or more of the following elements: <g>, <x/>, <bx/>, <ex/>, <bpt> , <ept>, <ph>, <it> , <mrk>, in any order.

<alt-trans>

Translation match - The <alt-trans> element contains possible translations in <target> elements along with optional context, notes, etc. The optional mid attribute indicates that the <alt-trans> applies only to a specific <mrk mtype="seg"> segment in the <seg-source> element of the <trans-unit>. (See the Segmentation section for further details.) The optional match-quality attribute provides a value indicating the exactness of the match between the <source> of the <alt-trans> and that of the <source> element of the parent <trans-unit>; e.g. "90%". The optional tool-id attribute accepts the id of the <tool> used to generate this <alt-trans>. The optional crc attribute allows a verification of the data. The optional xml:lang attribute is used to specify the content language of the <alt-trans>. The optional xml:space attribute is used to specify how white-spaces are to be treated within the <alt-trans>. The optional datatype attribute specifies the data type of the content of the <alt-trans>; e.g. "winres" for Windows resources. The optional restype, resname, extradata, help-id, menu, menu-option, menu-name, coord, font, css-style, style, exstyle, and extype attributes describe the resource contained within the <alt-trans>. The optional origin attribute specifies where the alternate translation comes from; e.g. a previous version of the product. The tool and ts attributes were DEPRECATED in XLIFF 1.1. Multiple <target> elements within a single <alt-trans> are DEPRECATED in XLIFF 1.2. A list of values for the datatype and restype attributes are provided by this specification.

Required attributes:

None.

Optional attributes:

mid, match-quality, tool, tool-id , crc, xml:lang, datatype , xml:space, ts, restype, resname, extradata, help-id , menu, menu-option, menu-name, coord, font, css-style, style, exstyle, extype, origin, phase-name , alttranstype, non-XLIFF attributes

Contents:

Zero or one <source> element, followed by
Zero or one <seg-source> element, followed by
One <target> element, followed by
Zero, one or more <context-group>, <prop-group>, <note> elements, in any order, followed by
Zero, one or more non-XLIFF elements.

All child elements of <alt-trans> pertain to their sibling <target> element.
While for backward compatibility reasons no order is enforced for the elements before the non-XLIFF elements, the recommended order is the one in which they are listed here.
Although not enforced, it is recommended to adopt the convention that more recent <alt-trans> elements appear before older ones in order to define the order that changes are introduced.

<bin-unit>

Binary unit - The <bin-unit> element contains a binary object that may or may not be translatable. The required id attribute is used to uniquely identify the <bin-unit> within all <trans-unit> and <bin-unit> elements within the same <file>. The required mime-type attribute specifies the data type of the binary object based on RFC 1341. The optional approved attribute indicates whether the translation has been approved by a reviewer. The optional translate attribute indicates whether the <bin-unit> is to be translated. The optional reformat attribute specifies whether and which attributes can be modified for the <bin-target> element of the <bin-unit>. The optional ts attribute was DEPRECATED in XLIFF 1.1. The optional phase-name attribute references the phase that the <bin-unit> is in. The optional restype and resname attributes describe the resource contained within the <bin-unit>. A list of values for the restype attribute is provided by this specification.

Required attributes:

id, mime-type.

Optional attributes:

approved, translate, reformat, ts, phase-name, restype, resname, non-XLIFF attributes

Contents:

One<bin-source> element, followed by
Zero or one <bin-target> element, followed by
Zero, one or more <context-group>, <count-group>, <prop-group>, <note>, <trans-unit> elements, in any order, followed by
Zero, one or more non-XLIFF elements.

All child elements of <bin-unit> pertain to their sibling <bin-source> element.
While for backward compatibility reasons no order is enforced for the elements before the non-XLIFF elements, the recommended order is the one in which they are listed here.

<bin-source>

Binary source -The <bin-source> element is the container for the binary source data. The optional ts attribute was DEPRECATED in XLIFF 1.1.

Required attributes:

None.

Optional attributes:

ts, non-XLIFF attributes

Contents:

One of <internal-file> or <external-file>.

<bin-target>

Binary target -The <bin-target> element is the container for the translated version of the binary data. The optional mime-type attribute specifies the data type of the binary object based on RFC 1341. The optional ts attribute was DEPRECATED in XLIFF 1.1. The optional state and state-qualifier attributes indicate in which state the <bin-target> is. The optional phase-name attribute references the phase that the <bin-target> is in. The optional restype and resname attributes describe the resource contained within the <bin-target>. A list of values for the restype, state, and state-qualifier attributes are provided by this specification.

Required attributes:

None.

Optional attributes:

mime-type, ts, state, phase-name , restype, resname, state-qualifier, non-XLIFF attributes

Contents:

One of <internal-file> or <external-file>.

<seg-source>

Source text - The <seg-source> element is used to maintain a working copy of the <source> element, where markup such as segmentation can be introduced without affecting the actual <source> element content. The content of the <seg-source> is generally the translatable text, typically divided into segments through the use of <mrk mtype="seg"> elements. See the Segmentation section for more information. As with the <source> element, the optional xml:lang attribute is used to specify the content language of the <seg-source>; this should always match source-language as a child of <trans-unit> but can vary as a child of <alt-trans>. The optional ts attribute was DEPRECATED in XLIFF 1.1.

Required attributes:

None.

Optional attributes:

xml:lang, ts, non-XLIFF attributes

Contents:

Text,
Zero, one or more of the following elements: <g>, <x/>, <bx/>, <ex/>, <bpt> , <ept>, <ph>, <it> , <mrk>, in any order.

3.2.4. Inline Elements

The inline elements are the elements that can appear inside the <source> and <target> elements. They enclose or replace any formatting or control code that is not text, but resides within the text unit.

<g>

Generic group placeholder - The <g> element is used to replace any inline code of the original document that has a beginning and an end, does not overlap other paired inline codes, and can be moved within its parent structural element. The required id attribute is used to reference the replaced code in the skeleton file. The optional ctype attribute allows you to specify what kind of attribute the placeholder represents; e.g. "bold". The optional ts attribute was DEPRECATED in XLIFF 1.1. The optional clone attribute indicates whether this <g> element may be duplicated. The optional xid attribute references a <trans-unit> or <bin-unit>, through its id attribute value, which can contain any translatable text from the replaced code. A list of values for the ctype attribute is available. The optional equiv-text attribute specifies text to substitute in place of the inline tag. A <g> element can contain another <g> element.

Required attributes:

id.

Optional attributes:

ctype, ts, clone, xid, equiv-text, non-XLIFF attributes

Contents:

Text,
Zero, one or more of the following elements: <g>, <x/>, <bx/> , <ex/>, <bpt>, <ept> , <ph>, <it>, <mrk> , in any order.

<x/>

Generic placeholder - The <x/> element is used to replace any code of the original document. The required id attribute is used to reference the replaced code in the skeleton file. The optional ctype attribute allows you to specify what kind of attribute the placeholder represents; e.g. "bold". The optional ts attribute was DEPRECATED in XLIFF 1.1. The optional clone attribute indicates whether this <x/> element may be duplicated. The optional xid attribute references a <trans-unit> or <bin-unit>, through its id attribute value, which can contain any translatable text from the replaced code. A list of values for the ctype attribute is provided by this specification. The optional equiv-text attribute specifies text to substitute in place of the inline tag.

Required attributes:

id.

Optional attributes:

ctype, ts, clone, xid., equiv-text, non-XLIFF attributes

Contents:

Empty.

<bx/>

Begin paired placeholder - The <bx/> element is used to replace a beginning paired code of the original document. It should be used for paired codes that do not follow XML well-formedness rules (i.e. no overlapping elements). If the paired codes follow that rule, it is strongly recommended that the <g> element is used because it simplifies processing. The <bx/> element should be followed by a matching <ex/> element. These paired elements are related via their rid attributes. If the rid attribute is not present (in a 1.0 document for example), the attribute id is used to match both tags. The required id attribute is used to reference the replaced code in the skeleton file. The optional ctype attribute allows you to specify what kind of attribute the placeholder represents; e.g. "bold". The optional ts attribute was DEPRECATED in XLIFF 1.1. The optional clone attribute indicates whether this <bx/> element may be duplicated. The optional xid attribute references a <trans-unit> or <bin-unit>, through its id attribute value, which can contain any translatable text from the replaced code. A list of values for the ctype attribute is provided by this specification. The optional equiv-text attribute specifies text to substitute in place of the inline tag.

Required attributes:

id.

Optional attributes:

rid, ctype, ts, clone, xid., equiv-text, non-XLIFF attributes

Contents:

Empty.

<ex/>

End paired placeholder - The <ex/> element is used to replace an ending paired code of the original document. It should be used for paired codes that do not follow XML well-formedness rules (i.e. no overlapping elements). If the paired codes follow that rule, it is strongly recommended that the <g> element is used because it simplifies processing. The <ex/> element should be preceded by a matching <bx/> element. These paired elements are related via their rid attributes. If the rid attribute is not present (in a 1.0 document for example), the attribute id is used to match both tags. The required id attribute is used to reference the replaced code in the skeleton file. The optional ts attribute was DEPRECATED in XLIFF 1.1. The optional xid attribute references a <trans-unit> or <bin-unit>, through its id attribute value, which can contain any translatable text from the replaced code. The optional equiv-text attribute specifies text to substitute in place of the inline tag.

Required attributes:

id.

Optional attributes:

rid, ts, xid., equiv-text, non-XLIFF attributes

Contents:

Empty.

<ph>

Placeholder - The <ph> element is used to delimit a sequence of native stand-alone codes in the translation unit. The required id attribute is used to identify the <ph> inline code. The optional ctype attribute allows you to specify what kind of attribute the placeholder represents; e.g. "bold". The optional ts attribute was DEPRECATED in XLIFF 1.1. The optional crc attribute allows a verification of the data. The optional assoc attribute specifies whether this placeholder code is associated with the text prior or after. The optional xid attribute references a <trans-unit> or <bin-unit>, through its id attribute value, which can contain any translatable text from the replaced code. A list of values for the ctype attribute is provided by this specification. The optional equiv-text attribute specifies text to substitute in place of the inline tag.

Required attributes:

id.

Optional attributes:

ctype, ts, crc, assoc, xid ., equiv-text, non-XLIFF attributes

Contents:

Code data,
Zero, one or more <sub> elements.

<bpt>

Begin paired tag - The <bpt> element is used to delimit the beginning of a paired sequence of native codes. Each <bpt> has a corresponding <ept> element within the translation unit. These paired elements are related via their rid attributes. If the rid attribute is not present (in a 1.0 document for example), the attribute id is used to match both tags. The required id attribute is used to identify the <bpt> inline code. The optional ctype attribute allows you to specify what kind of attribute the code represents; e.g. "bold". The optional ts attribute was DEPRECATED in XLIFF 1.1. The optional crc attribute allows a verification of the data. The optional xid attribute references a <trans-unit> or <bin-unit>, through its id attribute value, which can contain any translatable text from the inline code. A list of values for the ctype attribute is provided by this specification. The optional equiv-text attribute specifies text to substitute in place of the inline tag.

Required attributes:

id.

Optional attributes:

rid, ctype, ts, crc, xid., equiv-text, non-XLIFF attributes

Contents:

Code data,
Zero, one or more <sub> elements.

<ept>

End paired tag - The <ept> element is used to delimit the end of a paired sequence of native codes. Each <ept> has a corresponding <bpt> element within the translation unit. These paired elements are related via their rid attributes. If the rid attribute is not present (in a 1.0 document for example), the attribute id is used to match both tags. The required id attribute is used to identify the <ept> inline code. The optional ts attribute was DEPRECATED in XLIFF 1.1. The optional crc attribute allows a verification of the data. The optional xid attribute references a <trans-unit> or <bin-unit>, through its id attribute value, which can contain any translatable text from the inline code. The optional equiv-text attribute specifies text to substitute in place of the inline tag.

Required attributes:

id.

Optional attributes:

rid, ts, crc, xid., equiv-text, non-XLIFF attributes

Contents:

Code data,
Zero, one or more <sub> elements.

<it>

Isolated tag - The <it> element is used to delimit a beginning/ending sequence of native codes that does not have its corresponding ending/beginning within the translation unit. The required id attribute is used to identify the <it> inline code. The required pos attribute specifies whether this is the begin or end code. The optional ctype attribute allows you to specify what kind of attribute the code represents; e.g. "bold". The optional ts attribute was DEPRECATED in XLIFF 1.1. The optional crc attribute allows a verification of the data. The optional xid attribute references a <trans-unit> or <bin-unit>, through its id attribute value, which can contain any translatable text from the inline code. A list of values for the ctype attribute is provided by this specification. The optional equiv-text attribute specifies text to substitute in place of the inline tag.

Required attributes:

id, pos.

Optional attributes:

rid, ctype, ts, crc, xid., equiv-text, non-XLIFF attributes

Contents:

Code data,
Zero, one or more <sub> elements.

<sub>

Sub-flow - The <sub> element is used to delimit sub-flow text inside a sequence of native code, for example: the definition of a footnote or the text of a title attribute in a HTML <a> element. The optional datatype attribute specifies the data type of the content of the <sub>; e.g. "html". The optional ctype attribute allows you to specify what kind of attribute the code represents. The optional xid attribute references a <trans-unit> or <bin-unit>, through its id attribute value, which can contain any translatable text from the inline code. Lists of values for the ctype and datatype attributes are provided by this specification.

Required attributes:

None.

Optional attributes:

datatype, ctype, xid .

Contents:

Text,
Zero, one or more of the following elements: <g>, <x/>, <bx/> , <ex/>, <bpt>, <ept> , <ph>, <it>, <mrk> , in any order.

3.2.5. Delimiter Element

XLIFF defines an additional element to support various types of text processing. This element is usually not generated by the extraction module and is ignored most of the time during merging, but it can be very powerful with tools such as Machine Translation, glossary handling, quality assurance, etc.

<mrk>

Marker - The <mrk> element delimits a section of text that has special meaning, such as a terminological unit, a proper name, an item that should not be modified, etc. It can be used for various processing tasks. For example: to indicate to a Machine Translation tool proper names that should not be translated; for terminology verification; to mark suspect expressions after a grammar checking. The <mrk> element is usually not generated by the extraction tool and it is not part of the tags used to merge the XLIFF file back into its original format. The required mtype attribute specifies what is being delimited; e.g. "abbrev" for an abbreviation. The optional ts attribute was DEPRECATED in XLIFF 1.1. The optional comment attribute allow a free-form comment to be entered. A list of values for the mtype attribute is provided by this specification. The <mrk> element can be used to delimit segments as described in the Segmentation section.

Required attributes:s

mtype.

Optional attributes:

mid, ts, comment, non-XLIFF attributes

Contents:

Text,
Zero, one or more of the following elements: <g>, <x/>, <bx/> , <ex/>, <bpt>, <ept> , <ph>, <it>, <mrk> , in any order.

3.3. Attributes

This section lists the various attributes used in the XLIFF elements. An attribute is never specified more than once for each element. Along with some of the attributes is the list of their possible values.

XLIFF attributes alttranstype, annotates, approved, assoc, build-num, ctype, category, charclass, comment, company-name, contact-email , contact-name , contact-phone , context-type , coord, count-type, crc, css-style, datatype, date, exstyle, equiv-text, equiv-trans, extradata, extype, font, form, from , help-id, href, id, job-id , match-mandatory, match-quality , maxheight, maxbytes, maxwidth, menu, menu-name, menu-option, mid, merged-trans, mime-type, minheight, minbytes, minwidth, mtype, name, original, phase-name, pos, priority, process-name, product-name, product-version, prop-type, purpose, reformat, resname, restype, rid , size-unit, source-language , state, state-qualifier, style, tool, tool-company, tool-id, tool-name, tool-version, target-language , translate, ts, uid, unit , version, xid.
XML namespace attributes xml:lang, xml:space.

3.3.1. XLIFF Attributes

alttranstype

Resource type - Indicates the type of translation within the containing alt-trans element.

Value description:

The pre-defined values are defined in the table below.

Value Description
proposal Represents a translation proposal from a translation memory or other resource.
previous-version Represents a previous version of the target element.
rejected Represents a rejected version of the target element.
reference Represents a translation to be used for reference purposes only, for example from a related product or a different language.
accepted Represents a proposed translation that was used for the translation of the trans-unit, possibly modified.

In addition, user-defined values can be used with this attribute. A user-defined value must start with an "x-" prefix.

Default value:

proposal.

Used in:

<alt-trans>

annotates

Annotates - Indicates if a <note> element pertains to the <source> or the <target>, or neither in particular.

Value description:

source, target, or general.

Default value:

general.

Used in:

<note>.

approved

Approved - Indicates whether a translation is final or has passed its final review.

Value description:

Boolean: yes or no.

Default value:

no.

Used in:

<trans-unit>, <bin-unit>.

assoc

Association - Indicates the association of a <ph> with the text prior or after the inline element.

Value description:

preceding (the element is associated with the text preceding the element), following (the element is associated with the text following the element), and both (the element is associated with the text on both sides).

Default value:

Undefined.

Used in:

<ph>.

build-num

Build number - The build number of the version of the product or application the localizable material is for. For example: build-num="12" for the 12th build of the new version of a product.

Value description:

Alpha-numeric.

Default value:

Undefined.

Used in:

<file>.

category

Category - This provides information on the subject of what is being translated. For example: category="medical" for files from a medical related product.

Value description:

Text.

Default value:

Undefined.

Used in:

<file>.

charclass

Character class - This indicates that a translation is restricted to a subset of characters (i.e. ASCII only, Katakana only, uppercase only, etc.). A blank value indicates there is no limitation.

Value description:

Text.

Default value:

Undefined.

Used in:

<group>, <trans-unit>.

clone

Clone - This indicates that a copy of the given inline element can be made and placed multiple times in the <target>. This is useful for codes such as bold which may require duplication after localization of a segment.

Value description:

Boolean: yes or no.

Default value:

yes.

Used in:

<g>, <x/>, <bx/> .

comment

Comment - A comment in a tag.

Value description:

Alpha-numeric.

Default value:

Undefined.

Used in:

<mrk>.

company-name

Company name - The name of the company that has performed a task.

Value description:

Text.

Default value:

Undefined.

Used in:

<phase>.

contact-email

Contact email - The contact email of the contact-name person.

Value description:

Text.

Default value:

Undefined.

Used in:

<phase>.

contact-name

Contact name - The name of the person that has performed a task in a phase.

Value description:

Text.

Default value:

Undefined.

Used in:

<phase>.

contact-phone

Contact phone - The phone number of the contact-name person.

Value description:

Text.

Default value:

Undefined.

Used in:

<phase>.

context-type

Context type - The context-type attribute specifies the context and the type of resource or style of the data of a given element. For example, to define if it is a label, or a menu item in the case of resource-type data, or the style in the case of document-related data.

Value description:

The pre-defined values are defined in the table below.

Value Description
database Indicates a database content.
element Indicates the content of an element within an XML document.
elementtitle Indicates the name of an element within an XML document.
linenumber Indicates the line number from the sourcefile (see context-type="sourcefile") where the <source> is found.
numparams Indicates a the number of parameters contained within the <source>.
paramnotes Indicates notes pertaining to the parameters in the <source>.
record Indicates the content of a record within a database.
recordtitle Indicates the name of a record within a database.
sourcefile Indicates the original source file in the case that multiple files are merged to form the original file from which the XLIFF file is created. This differs from the original <file> attribute in that this sourcefile is one of many that make up that file.

In addition, user-defined values can be used with this attribute. A user-defined value must start with an "x-" prefix.

Default value:

Undefined.

Used in:

<context>.

coord

Coordinates - The coord attribute specifies the x, y, cx and cy coordinates of the text for a given element. The cx and cy values must represent the width and the height (as in Windows resources). The extraction and merging tools must make the right conversion if the original format uses a top-left/bottom-right coordinate system.

Value description:

Four decimal (possibly negative) values, in the order: x, y, cx and cy, separated by semi-colons. Null values may be entered as "#"; (e.g. coord="#;#;183;272").

Default value:

Undefined.

Used in:

<group>, <trans-unit>, <target>, <alt-trans>.

count-type

Count type - The count-type attribute specifies the purpose of the <count> element. For example: count-type="total" for the total count of words in the current scope.

Value description:

The pre-defined values are defined in the table below.

Value Description
num-usages Indicates the count units are items that are used X times in a certain context; example: this is a reusable text unit which is used 42 times in other texts.
repetition Indicates the count units are translation units existing already in the same document.
total Indicates a total count.

In addition, user-defined values can be used with this attribute. A user-defined value must start with an "x-" prefix.

In addition, the count-type attribute can take any value defined for datatype, restype, or state.

Default value:

None.

Used in:

<count>.

crc

Cyclic redundancy checking - A private value used to verify data as it is returned to the producer. The generation and verification of this number is tool-specific.

Value description:

Number (possibly not decimal).

Default value:

None.

Used in:

<internal-file> , <external-file>, <context-group>, <context>, <alt-trans>, <bpt>, <ept>, <it> , <ph>.

css-style

Cascading style-sheet style - The css-style attribute allows any valid CSS statement to be specified.

Value description:

Text, the value is subject to CSS syntax rules.

Default value:

Undefined.

Used in:

<group>, <trans-unit>, <target>, <alt-trans>.

ctype

Content type - The ctype attribute specifies the type of code that is represented by the inline element; e.g. ctype="bold" means that the code represents a bolding code.

Value description for the ctype attribute of the <x/> and <ph> elements:

The pre-defined values are defined in the table below.

Value Description
image Indicates a inline image.
pb Indicates a page break.
lb Indicates a line break.

In addition, user-defined values can be used with this attribute. A user-defined value must start with an "x-" prefix.

Value description for the ctype attribute of other elements:

The pre-defined values are defined in the table below.

Value Description
bold Indicates a run of bolded text.
italic Indicates a run of text in italics.
underlined Indicates a run of underlined text.
link Indicates a run of hyper-text.

In addition, user-defined values can be used with this attribute. A user-defined value must start with an "x-" prefix.

Default value:

Undefined.

Used in:

<g>, <x/>, <bx/> , <bpt>, <sub>, <it> , <ph>.

datatype

Data type - The datatype attribute specifies the kind of text contained in the element. Depending on that type, you may apply different processes to the data. For example: datatype="winres" specifies that the content is Windows resources which would allow using the Win32 API in rendering the content.

Value description:

The pre-defined values are defined in the table below.

Value Description
asp Indicates Active Server Page data.
c Indicates C source file data.
cdf Indicates Channel Definition Format (CDF) data.
cfm Indicates ColdFusion data.
cpp Indicates C++ source file data.
csharp Indicates C-Sharp data.
cstring Indicates strings from C, ASM, and driver files data.
csv Indicates comma-separated values data.
database Indicates database data.
documentfooter Indicates portions of document that follows data and contains metadata.
documentheader Indicates portions of document that precedes data and contains metadata.
filedialog Indicates data from standard UI file operations dialogs (e.g., Open, Save, Save As, Export, Import).
form Indicates standard user input screen data.
html Indicates HyperText Markup Language (HTML) data - document instance.
htmlbody Indicates content within an HTML document's <body> element.
ini Indicates Windows INI file data.
interleaf Indicates Interleaf data.
javaclass Indicates Java source file data (extension '.java').
javapropertyresourcebundle Indicates Java property resource bundle data.
javalistresourcebundle Indicates Java list resource bundle data.
javascript Indicates JavaScript source file data.
jscript Indicates JScript source file data.
layout Indicates information relating to formatting.
lisp Indicates LISP source file data.
margin Indicates information relating to margin formats.
menufile Indicates a file containing menu.
messagefile Indicates numerically identified string table.
mif Indicates Maker Interchange Format (MIF) data.
mimetype Indicates that the datatype attribute value is a MIME Type value and is defined in the mime-type attribute.
mo Indicates GNU Machine Object data.
msglib Indicates Message Librarian strings created by Novell's Message Librarian Tool.
pagefooter Indicates information to be displayed at the bottom of each page of a document.
pageheader Indicates information to be displayed at the top of each page of a document.
parameters Indicates a list of property values (e.g., settings within INI files or preferences dialog).
pascal Indicates Pascal source file data.
php Indicates Hypertext Preprocessor data.
plaintext Indicates plain text file (no formatting other than, possibly, wrapping).
po Indicates GNU Portable Object file.
report Indicates dynamically generated user defined document. e.g. Oracle Report, Crystal Report, etc.
resources Indicates Windows .NET binary resources.
resx Indicates Windows .NET Resources.
rtf Indicates Rich Text Format (RTF) data.
sgml Indicates Standard Generalized Markup Language (SGML) data - document instance.
sgmldtd Indicates Standard Generalized Markup Language (SGML) data - Document Type Definition (DTD).
svg Indicates Scalable Vector Graphic (SVG) data.
vbscript Indicates VisualBasic Script source file.
warning Indicates warning message.
winres Indicates Windows (Win32) resources (i.e. resources extracted from an RC script, a message file, or a compiled file).
xhtml Indicates Extensible HyperText Markup Language (XHTML) data - document instance.
xml Indicates Extensible Markup Language (XML) data - document instance.
xmldtd Indicates Extensible Markup Language (XML) data - Document Type Definition (DTD).
xsl Indicates Extensible Stylesheet Language (XSL) data.
xul Indicates XUL elements.

In addition, user-defined values can be used with this attribute. A user-defined value must start with an "x-" prefix.

Default value:

Empty string.

Used in:

<file>, <group>, <trans-unit>, <alt-trans>, <sub>.

date

Date - The date attribute indicates when a given element was created or modified.

Value description:

Date in [ISO 8601] Format. The recommended pattern to use is: CCYY-MM-DDThh:mm:ssZ
Where: CCYY is the year (4 digits), MM is the month (2 digits), DD is the day (2 digits), hh is the hours (2 digits), mm is the minutes (2 digits), ss is the second (2 digits), and Z indicates the time is UTC time. For example:

date="2002-01-25T21:06:00Z"
is January 25, 2002 at 9:06pm GMT
is January 25, 2002 at 2:06pm US Mountain Time
is January 26, 2002 at 6:06am Japan time

Default value:

Undefined.

Used in:

<file>,<phase>.

equiv-text

equiv-text - Indicates the equivalent text to substitute in place of an inline tag. It is useful for inserting whitespace or other content in place of markup to facilitate consistent word counting. The equiv-text attribute is also useful for ensuring consistent round trip conversion between native resource formats and XLIFF content, for example the resource string "F&ile" converts to the following XLIFF: "F<x id='1' ctype='x-akey' equiv-text=''/>ile" to preserve the underlying translatable content.

Value description:

Text

Default value:

Undefined.

Used in:

<g>, <x/>, <bx/> , <ex/>, <bpt>, <ept> , <ph>, <it>.

equiv-trans

equiv-trans - Indicates if the target language translation is a direct equivalent of the source text.

Value description:

yes, or no.

Default value:

yes.

Used in:

<target>

exstyle

Extended style - The exstyle attribute stores the extended style of a control. For example, in Windows resources it corresponds to the EXSTYLE statement.

Value description:

Text.

Default value:

Undefined.

Used in:

<group>, <trans-unit>, <target>, <alt-trans>.

extradata

Extra data - The extradata attribute stores the extra data properties of an item.

Value description:

Text.

Default value:

Undefined.

Used in:

<group>, <trans-unit>, <alt-trans>.

extype

Extended type -The extype attribute stores the extra type properties of an item.

Value description:

Text.

Default value:

Undefined.

Used in:

<group>, <trans-unit>, <alt-trans>.

font

Font - The font attribute specifies the font name, size, and weight of the text for a given element. The font attribute would generally be used for resource-type data: change of font in document-type data can be marked with the <g> element.

Value description:

Name of the font, its size, its weight, its style and its encoding separated by semi-colons. Only the name of the font is required.

Default value:

Undefined.

Used in:

<group>, <trans-unit>, <target>, <alt-trans>.

form

Format - Describes the type of format used in an <internal-file> element. For example: form="text" indicates a plain text format internal file.

Value description:

The value can be either text (for plain text data), base64 (for data coded in base64 format), or one of values available from the [RFC 1341] document: the MIME specification.

Default value:

text.

Used in:

<internal-file> .

from

From - Indicates the author of a <note> element. For example: from="reviewer" indicates a note from a reviewer.

Value description:

Text.

Default value:

Undefined.

Used in:

<note>.

help-id

Help ID -The help-id attribute stores the help identifier of an item. For example, in Windows resources it corresponds to the Help ID parameter of a control.

Value description:

Number.

Default value:

Undefined.

Used in:

<group>, <trans-unit>, <alt-trans>.

href

Hypertext reference - The location of the file or the URL for an <external-file> element. For example: href="file:///C:/MyFolder/MyProject/MyFile.htm" indicates a file on a local drive.

Value description:

Text.

Default value:

Undefined.

Used in:

<external-file> .

id

Identifier - The id attribute is used in many elements as a reference to the original corresponding code data or format for the given element. The value of the id element is determined by the tool creating the XLIFF document. It may or may not be a resource identifier. The identifier of a resource should, at least, be stored in the resname attribute.

For example:

<trans-unit id="34" resname="IDD_ABOUT_DLG" restype="dialog"
coord="0;0;235;100" font="MS Sans Serif;8" style="0x0932239">
<source>About Dialog</source>
</trans-unit>
<trans-unit id="IDD_ABOUT_DLG" resname="IDD_ABOUT_DLG"
 restype="dialog" coord="0;0;235;100" font="MS Sans Serif;8"
 style="0x0932239">
<source>About Dialog</source>
</trans-unit>

Value description:

Text. Note that, while allowed, spaces are usually not used in identifiers.

Default value:

Undefined.

Used in:

<group>, <trans-unit>, <bin-unit>, <g>, <x/>, <bx/>, <ex/>, <bpt>, <ept>, <it>, <ph> .

job-id

Job ID - The identifier given to the localization job. This is determined by the entity creating the phase element at the time of processing the file.

Value description:

Text.

Default value:

Undefined.

Used in:

<phase>.

match-mandatory

Match mandatory -Indicates that any <alt-trans> element of the parent <trans-unit> must have the same <context> as the <trans-unit>.

Value description:

Boolean: yes or no.

Default value:

no.

Used in:

<context>.

match-quality

Match quality - The match quality of the <alt-trans> element is tool specific and can be a score expressed in percentage or an arbitrary value (e.g. match-quality="high").

Value description:

Text.

Default value:

Undefined.

Used in:

<alt-trans> .

maxheight

Maximum height - The maximum height for the <target> of a <trans-unit>. This could be interpreted as lines, pixels, or any other relevant unit. The unit is determined by the size-unit attribute, which defaults to pixel.

Value description:

Number.

Default value:

Undefined.

Used in:

<group>, <trans-unit>.

maxbytes

Maximum bytes - The maximum number of bytes for the <target> of a <trans-unit>. The verification of whether the relevant text respects this requirement must be done using the encoding and line-break type of the final target environment.

Value description:

Number.

Default value:

Undefined.

Used in:

<group>, <trans-unit>.

maxwidth

Maximum width - The maximum width for the <target> of a <trans-unit>. This could be interpreted as lines, pixels, or any other relevant unit. The unit is determined by the size-unit attribute, which defaults to pixel.

Value description:

Number.

Default value:

Undefined.

Used in:

<group>, <trans-unit>.

menu

Menu - The menu attribute stores the menu property of an item.

Value description:

Text.

Default value:

Undefined.

Used in:

<group>, <trans-unit>, <alt-trans>.

menu-name

Menu name - The menu-name attribute stores the menu name of a control.

Value description:

Text.

Default value:

Undefined.

Used in:

<group>, <trans-unit>, <alt-trans>.

menu-option

Menu option - The menu-option attribute stores the option data of a control.

Value description:

Text.

Default value:

Undefined.

Used in:

<group>, <trans-unit>, <alt-trans>.

mid

Marker ID - Identifier for an <mrk> element. When used with in combination with mtype="seg" the value of this attribute is used to reference segments between the <seg-source> and <target> of a <trans-unit>. When used in <alt-trans> this attribute indicates that the entire <alt-trans> element references a particular <mrk mtype ="seg"> segment in the <seg-source> (and <target>) element. See the Segmentation section for further details.

Value description:

Text.

Default value:

Undefined.

Used in:

<mrk>, <alt-trans>

merged-trans

merged-trans - Indicates if the group element contains merged trans-unit elements.

Value description:

yes, or no.

Default value:

no.

Used in:

<group>

mime-type

Mime type -Indicates the type of a binary object. These roughly correspond to the content-type of RFC 1341 , the MIME specification; e.g. mime-type="image/jpeg" indicates the binary object is an image file of JPEG format. This is important in determining how to edit the binary object.

Value description:

Text. A list of preferred values is available from the [RFC 1341] document: the MIME specification.

Default value:

Undefined.

Used in:

<bin-unit>, <bin-target>.

minheight

Minimum height - The minimum height for the <target> of a <trans-unit>. This could be interpreted as lines, pixels, or any other relevant unit. The unit is determined by the size-unit attribute, which defaults to pixel.

Value description:

Number.

Default value:

Undefined.

Used in:

<group>, <trans-unit>.

minbytes

Minimum bytes - The minimum number of bytes for the <target> of a <trans-unit>. The verification of whether the relevant text respects this requirement must be done using the encoding and line-break type of the final target environment.

Value description:

Number.

Default value:

Undefined.

Used in:

<group>, <trans-unit>.

minwidth

Minimum width - The minimum width for the <target> of a <trans-unit>. This could be interpreted as lines, pixels, or any other relevant unit. The unit is determined by the size-unit attribute, which defaults to pixel.

Value description:

Number.

Default value:

Undefined.

Used in:

<group>, <trans-unit>.

mtype

Marker type -The mtype attribute specifies what a <mrk> element is defining within the content of a <source> or <target> element.

Value description:

The pre-defined values are defined in the table below.

Value Description
abbrev Indicates the marked text is an abbreviation.
abbreviated-form ISO-12620 2.1.8: A term resulting from the omission of any part of the full term while designating the same concept.
abbreviation ISO-12620 2.1.8.1: An abbreviated form of a simple term resulting from the omission of some of its letters (e.g. 'adj.' for 'adjective').
acronym ISO-12620 2.1.8.4: An abbreviated form of a term made up of letters from the full form of a multiword term strung together into a sequence pronounced only syllabically (e.g. 'radar' for 'radio detecting and ranging').
appellation ISO-12620: A proper-name term, such as the name of an agency or other proper entity.
collocation ISO-12620 2.1.18.1: A recurrent word combination characterized by cohesion in that the components of the collocation must co-occur within an utterance or series of utterances, even though they do not necessarily have to maintain immediate proximity to one another.
common-name ISO-12620 2.1.5: A synonym for an international scientific term that is used in general discourse in a given language.
datetime Indicates the marked text is a date and/or time.
equation ISO-12620 2.1.15: An expression used to represent a concept based on a statement that two mathematical expressions are, for instance, equal as identified by the equal sign (=), or assigned to one another by a similar sign.
expanded-form ISO-12620 2.1.7: The complete representation of a term for which there is an abbreviated form.
formula ISO-12620 2.1.14: Figures, symbols or the like used to express a concept briefly, such as a mathematical or chemical formula.
head-term ISO-12620 2.1.1: The concept designation that has been chosen to head a terminological record.
initialism ISO-12620 2.1.8.3: An abbreviated form of a term consisting of some of the initial letters of the words making up a multiword term or the term elements making up a compound term when these letters are pronounced individually (e.g. 'BSE' for 'bovine spongiform encephalopathy').
international-scientific-term ISO-12620 2.1.4: A term that is part of an international scientific nomenclature as adopted by an appropriate scientific body.
internationalism ISO-12620 2.1.6: A term that has the same or nearly identical orthographic or phonemic form in many languages.
logical-expression ISO-12620 2.1.16: An expression used to represent a concept based on mathematical or logical relations, such as statements of inequality, set relationships, Boolean operations, and the like.
materials-management-unit ISO-12620 2.1.17: A unit to track object.
name Indicates the marked text is a name.
near-synonym ISO-12620 2.1.3: A term that represents the same or a very similar concept as another term in the same language, but for which interchangeability is limited to some contexts and inapplicable in others.
part-number ISO-12620 2.1.17.2: A unique alphanumeric designation assigned to an object in a manufacturing system.
phrase Indicates the marked text is a phrase.
phraseological-unit ISO-12620 2.1.18: Any group of two or more words that form a unit, the meaning of which frequently cannot be deduced based on the combined sense of the words making up the phrase.
protected Indicates the marked text should not be translated.
romanized-form ISO-12620 2.1.12: A form of a term resulting from an operation whereby non-Latin writing systems are converted to the Latin alphabet.
seg Indicates that the marked text represents a segment.
set-phrase ISO-12620 2.1.18.2: A fixed, lexicalized phrase.
short-form ISO-12620 2.1.8.2: A variant of a multiword term that includes fewer words than the full form of the term (e.g. 'Group of Twenty-four' for 'Intergovernmental Group of Twenty-four on International Monetary Affairs').
sku ISO-12620 2.1.17.1: Stock keeping unit, an inventory item identified by a unique alphanumeric designation assigned to an object in an inventory control system.
standard-text ISO-12620 2.1.19: A fixed chunk of recurring text.
symbol ISO-12620 2.1.13: A designation of a concept by letters, numerals, pictograms or any combination thereof.
synonym ISO-12620 2.1.2: Any term that represents the same or a very similar concept as the main entry term in a term entry.
synonymous-phrase ISO-12620 2.1.18.3: Phraseological unit in a language that expresses the same semantic content as another phrase in that same language.
term Indicates the marked text is a term.
transcribed-form ISO-12620 2.1.11: A form of a term resulting from an operation whereby the characters of one writing system are represented by characters from another writing system, taking into account the pronunciation of the characters converted.
transliterated-form ISO-12620 2.1.10: A form of a term resulting from an operation whereby the characters of an alphabetic writing system are represented by characters from another alphabetic writing system.
truncated-term ISO-12620 2.1.8.5: An abbreviated form of a term resulting from the omission of one or more term elements or syllables (e.g. 'flu' for 'influenza').
variant ISO-12620 2.1.9: One of the alternate forms of a term.

In addition, user-defined values can be used with this attribute. A user-defined value must start with an "x-" prefix.

Default value:

Undefined.

Used in:

<mrk>.

name

Name - The name attribute specifies the user-defined name of a named group element. This is used for identification purposes only and is not referenced with the file, unless by a processing instruction.

Value description:

Text.

Default value:

Undefined.

Used in:

<prop-group>, <context-group>, <count-group>.

origin

Translation Match Origin - The origin attribute specifies where a translation match came from; for example, from a previous version of the same product, a different product, a shared translation memory, etc.

Value description:

Text.

Default value:

Undefined.

Used in:

<alt-trans> .

original

Original file - The original attribute specifies the name of the original file from which the contents of a <file> element has been extracted.

Value description:

Text.

Default value:

Undefined.

Used in:

<file>.

phase-name

Phase Name - The phase-name attribute provides a unique name for a <phase> element. It is used in other elements in the file to refer to the given <phase> element.

Value description:

Text.

Default value:

Undefined.

Used in:

<count>, <phase>, <trans-unit>, <target>, <bin-unit>, <bin-target>, <alt-trans> .

pos

Position - Indicates whether an isolated tag <it> is a beginning or an ending tag.

Value description:

open or close.

Default value:

Undefined.

Used in:

<it>.

priority

Priority - The priority of a <note> element.

Value description:

A number between 1 and 10, 1 being the highest priority.

Default value:

1

Used in:

<note>.

process-name

Process name - The name specifying the type of process a given <phase> corresponds to (e.g. Translation, Proofreading, Sizing, etc.).

Value description:

Text.

Default value:

Undefined.

Used in:

<phase>.

product-name

Product name - The name of the product which uses this file.

Value description:

Text.

Default value:

Undefined.

Used in:

<file>.

product-version

Product version - The version of the product which uses this file.

Value description:

Alpha-numeric.

Default value:

Undefined.

Used in:

<file>.

prop-type

Property type - The prop-type attribute specifies the type of a <prop> element.

Important: Because the <prop> element was DEPRECATED in version 1.1 and this attribute is only a member of that element, this attribute is also deprecated. Instead, use attributes defined in a namespace different from XLIFF. See the Extensibility section for more information.

Value description:

Text. No value defined by the standard.

Default value:

Undefined.

Used in:

<prop>.

purpose

Purpose - The purpose attribute specifies the purpose of a <context-group> element. For example: purpose="information" indicates the content is informational only and not used for specific processing.

Value description:

The pre-defined values are defined in the table below.

Value Description
information Indicates that the context is informational in nature, specifying for example, how a term should be translated. Thus, should be displayed to anyone editing the XLIFF document.
location Indicates that the context-group is used to specify where the term was found in the translatable source. Thus, it is not displayed.
match Indicates that the context information should be used during translation memory lookups. Thus, it is not displayed.

In addition, user-defined values can be used with this attribute. A user-defined value must start with an "x-" prefix.

Combinations of these values can be used. For example, purpose="location match x-validate" provides both location (location) and TM matching (match) contextual information, as well as some user-defined data (x-validate ).

Default value:

Undefined.

Used in:

<context-group> .

reformat

Reformat - Indicates whether some properties (size, font, etc.) of the target can be formatted differently from the source.

Value description (stand-alone):

The pre-defined values are defined in the table below.

Value Description
yes This value indicates that all properties can be reformatted. This value must be used alone.
no This value indicates that no properties should be reformatted. This value must be used alone.

Value description (enumerated):

The pre-defined values are defined in the table below.

Value Description
coord This value indicates that all information in the coord attribute can be modified.
coord-x This value indicates that the x information in the coord attribute can be modified.
coord-y This value indicates that the y information in the coord attribute can be modified.
coord-cx This value indicates that the cx information in the coord attribute can be modified.
coord-cy This value indicates that the cy information in the coord attribute can be modified.
font This value indicates that all the information in the font attribute can be modified.
font-name This value indicates that the name information in the font attribute can be modified.
font-size This value indicates that the size information in the font attribute can be modified.
font-weight This value indicates that the weight information in the font attribute can be modified.
css-style This value indicates that the information in the css-style attribute can be modified.
style This value indicates that the information in the style attribute can be modified.
ex-style This value indicates that the information in the exstyle attribute can be modified.

In addition, user-defined values can be used with this attribute. A user-defined value must start with an "x-" prefix.

Except for the values yes and no, the other values can be used in combination, separated by a space. For example:

reformat="yes"

All properties can be reformatted.

reformat="no"

No properties should be reformatted.

reformat="font-name coord-x coord-y"

Only the name part of the font attribute, the x part of the coord attribute and the y part of the coord attribute can be modified.

Default value:

yes.

Used in:

<group>, <trans-unit>,<bin-unit>.

resname

Resource name - Resource name or identifier of a item. For example: the key in the key/value pair in a Java properties file, the ID of a string in a Windows string table, the index value of an entry in a database table, etc.

Value description:

Text.

Default value:

Undefined.

Used in:

<group>. <trans-unit>, <alt-trans>, <target>, <bin-unit>, <bin-target>.

restype

Resource type - Indicates the resource type of the container element.

Value description:

The pre-defined values are defined in the table below.

Value Description
auto3state Indicates a Windows RC AUTO3STATE control.
autocheckbox Indicates a Windows RC AUTOCHECKBOX control.
autoradiobutton Indicates a Windows RC AUTORADIOBUTTON control.
bedit Indicates a Windows RC BEDIT control.
bitmap Indicates a bitmap, for example a BITMAP resource in Windows.
button Indicates a button object, for example a BUTTON control Windows.
caption Indicates a caption, such as the caption of a dialog box.
cell Indicates the cell in a table, for example the content of the <td> element in HTML.
checkbox Indicates check box object, for example a CHECKBOX control in Windows.
checkboxmenuitem Indicates a menu item with an associated checkbox.
checkedlistbox Indicates a list box, but with a check-box for each item.
colorchooser Indicates a color selection dialog.
combobox Indicates a combination of edit box and listbox object, for example a COMBOBOX control in Windows.
comboboxexitem Indicates an initialization entry of an extended combobox DLGINIT resource block. (code 0x1234).
comboboxitem Indicates an initialization entry of a combobox DLGINIT resource block (code 0x0403).
component Indicates a UI base class element that cannot be represented by any other element.
contextmenu Indicates a context menu.
ctext Indicates a Windows RC CTEXT control.
cursor Indicates a cursor, for example a CURSOR resource in Windows.
datetimepicker Indicates a date/time picker.
defpushbutton Indicates a Windows RC DEFPUSHBUTTON control.
dialog Indicates a dialog box.
dlginit Indicates a Windows RC DLGINIT resource block.
edit Indicates an edit box object, for example an EDIT control in Windows.
file Indicates a filename.
filechooser Indicates a file dialog.
fn Indicates a footnote.
font Indicates a font name.
footer Indicates a footer.
frame Indicates a frame object.
grid Indicates a XUL grid element.
groupbox Indicates a groupbox object, for example a GROUPBOX control in Windows.
header Indicates a header item.
heading Indicates a heading, such has the content of <h1>, <h2>, etc. in HTML.
hedit Indicates a Windows RC HEDIT control.
hscrollbar Indicates a horizontal scrollbar.
icon Indicates an icon, for example an ICON resource in Windows.
iedit Indicates a Windows RC IEDIT control.
keywords Indicates keyword list, such as the content of the Keywords meta-data in HTML, or a K footnote in WinHelp RTF.
label Indicates a label object.
linklabel Indicates a label that is also a HTML link (not necessarily a URL).
list Indicates a list (a group of list-items, for example an <ol> or <ul> element in HTML).
listbox Indicates a listbox object, for example an LISTBOX control in Windows.
listitem Indicates an list item (an entry in a list).
ltext Indicates a Windows RC LTEXT control.
menu Indicates a menu (a group of menu-items).
menubar Indicates a toolbar containing one or more tope level menus.
menuitem Indicates a menu item (an entry in a menu).
menuseparator Indicates a XUL menuseparator element.
message Indicates a message, for example an entry in a MESSAGETABLE resource in Windows.
monthcalendar Indicates a calendar control.
numericupdown Indicates an edit box beside a spin control.
panel Indicates a catch all for rectangular areas.
popupmenu Indicates a standalone menu not necessarily associated with a menubar.
pushbox Indicates a pushbox object, for example a PUSHBOX control in Windows.
pushbutton Indicates a Windows RC PUSHBUTTON control.
radio Indicates a radio button object.
radiobuttonmenuitem Indicates a menuitem with associated radio button.
rcdata Indicates raw data resources for an application.
row Indicates a row in a table.
rtext Indicates a Windows RC RTEXT control.
scrollpane Indicates a user navigable container used to show a portion of a document.
separator Indicates a generic divider object (e.g. menu group separator).
shortcut Windows accelerators, shortcuts in resource or property files.
spinner Indicates a UI control to indicate process activity but not progress.
splitter Indicates a splitter bar.
state3 Indicates a Windows RC STATE3 control.
statusbar Indicates a window for providing feedback to the users, like 'read-only', etc.
string Indicates a string, for example an entry in a STRINGTABLE resource in Windows.
tabcontrol Indicates a layers of controls with a tab to select layers.
table Indicates a display and edits regular two-dimensional tables of cells.
textbox Indicates a XUL textbox element.
togglebutton Indicates a UI button that can be toggled to on or off state.
toolbar Indicates an array of controls, usually buttons.
tooltip Indicates a pop up tool tip text.
trackbar Indicates a bar with a pointer indicating a position within a certain range.
tree Indicates a control that displays a set of hierarchical data.
uri Indicates a URI (URN or URL).
userbutton Indicates a Windows RC USERBUTTON control.
usercontrol Indicates a user-defined control like CONTROL control in Windows.
var Indicates the text of a variable.
versioninfo Indicates version information about a resource like VERSIONINFO in Windows.
vscrollbar Indicates a vertical scrollbar.
window Indicates a graphical window.

In addition, user-defined values can be used with this attribute. A user-defined value must start with an "x-" prefix.

Default value:

Undefined.

Used in:

<group>, <trans-unit>, <target>, <alt-trans>, <bin-unit>, <bin-target>.

rid

Reference identifier - The rid attribute is used to link paired inline elements. The rid attribute of a begin-paired-code element should have the same value as the close-paired-code element. For example: <bx id="1" rid="1"/> ... <ex id="3" rid="1"/> indicates these elements are paired. If the rid attribute is not present (in a 1.0 document for example), the attribute id is used to match both tags. For example: <bpt id='5'>xx</bpt> ... <ept id='5'>xx</ept>.

Value description:

Alpha-numeric without spaces.

Default value:

Undefined.

Used in:

<bpt>, <ept>, <it> , <bx/>, <ex/>.

size-unit

Unit of size attributes - The size-unit attribute specifies the units of measure used in the maxheight, minheight, maxwidth, and minwidth attributes. The size-unit attribute is not related to the coord attribute.

Value description:

The pre-defined values are defined in the table below.

Value Description
byte Indicates a size in 8-bit bytes.
char Indicates a size in Unicode characters.
col Indicates a size in columns. Used for HTML text area.
cm Indicates a size in centimeters.
dlgunit Indicates a size in dialog units, as defined in Windows resources.
em Indicates a size in 'font-size' units (as defined in CSS).
ex Indicates a size in 'x-height' units (as defined in CSS).
glyph Indicates a size in glyphs. A glyph is considered to be one or more combined Unicode characters that represent a single displayable text character. Sometimes referred to as a 'grapheme cluster'
in Indicates a size in inches.
mm Indicates a size in millimeters.
percent Indicates a size in percentage.
pixel Indicates a size in pixels.
point Indicates a size in point.
row Indicates a size in rows. Used for HTML text area.

In addition, user-defined values can be used with this attribute. A user-defined value must start with an "x-" prefix.

Default value:

pixel.

Used in:

<group>, <trans-unit>.

source-language

Source language - The language for the <source> elements in the given <file> element.

Value description:

A language code as described in the [RFC 4646], the successor to [RFC 3066]. The values for this attribute follow the same rules as the values for xml:lang. Unlike the other XLIFF attributes, the values for xml:lang are not case-sensitive. For more information see the section on xml:lang in the XML specification, and the erratum E11 (which replaces RFC 1766 by RFC 3066).

The source language can be also specified by xml:lang in each <source> element. The values of source-language and xml:lang in <source> can be different only in an <alt-trans> element.

Default value:

Undefined.

Used in:

<file>.

state

State - The status of a particular translation in a <target> or <bin-target> element.

Value description:

The pre-defined values are defined in the table below.

Value Description
final Indicates the terminating state.
needs-adaptation Indicates only non-textual information needs adaptation.
needs-l10n Indicates both text and non-textual information needs adaptation.
needs-review-adaptation Indicates only non-textual information needs review.
needs-review-l10n Indicates both text and non-textual information needs review.
needs-review-translation Indicates that only the text of the item needs to be reviewed.
needs-translation Indicates that the item needs to be translated.
new Indicates that the item is new. For example, translation units that were not in a previous version of the document.
signed-off Indicates that changes are reviewed and approved.
translated Indicates that the item has been translated.

In addition, user-defined values can be used with this attribute. A user-defined value must start with an "x-" prefix.

Default value:

Undefined.

Used in:

<target>, <bin-target>.

state-qualifier

State-qualifier - Describes the state of a particular translation in a <target> or <bin-target> element.

Value description:

The pre-defined values are defined in the table below.

Value Description
exact-match Indicates an exact match. An exact match occurs when a source text of a segment is exactly the same as the source text of a segment that was translated previously.
fuzzy-match Indicates a fuzzy match. A fuzzy match occurs when a source text of a segment is very similar to the source text of a segment that was translated previously (e.g. when the difference is casing, a few changed words, white-space discripancy, etc.).
id-match Indicates a match based on matching IDs (in addition to matching text).
leveraged-glossary Indicates a translation derived from a glossary.
leveraged-inherited Indicates a translation derived from existing translation.
leveraged-mt Indicates a translation derived from machine translation.
leveraged-repository Indicates a translation derived from a translation repository.
leveraged-tm Indicates a translation derived from a translation memory.
mt-suggestion Indicates the translation is suggested by machine translation.
rejected-grammar Indicates that the item has been rejected because of incorrect grammar.
rejected-inaccurate Indicates that the item has been rejected because it is incorrect.
rejected-length Indicates that the item has been rejected because it is too long or too short.
rejected-spelling Indicates that the item has been rejected because of incorrect spelling.
tm-suggestion Indicates the translation is suggested by translation memory.

In addition, user-defined values can be used with this attribute. A user-defined value must start with an "x-" prefix.

Default value:

Undefined.

Used in:

<target>, <bin-target>.

style

Style - The resource style of a control. For example, in Windows resources it corresponds to the STYLE statement.

Value description:

Text.

Default value:

Undefined.

Used in:

<group>, <trans-unit>, <target>, <alt-trans>.

target-language

Target language - The language for the <target> elements in the given <file> element.

Value description:

A language code as described in the [RFC 4646], the successor to [RFC 3066]. The values for this attribute follow the same rules as the values for xml:lang. Unlike the other XLIFF attributes, the values for xml:lang are not case-sensitive. For more information see the section on xml:lang in the XML specification, and the erratum E11 (which replaces RFC 1766 by RFC 3066).

The target language can be also specified by xml:lang in each <target> element. The values of target-language and xml:lang in <target> can be different only when in an <alt-trans> element.

Default value:

Undefined.

Used in:

<file>.

tool

Creation tool - The tool attribute is used to specify the signature and version of the tool that created or modified the document.

Important: The tool attribute was DEPRECATED in version 1.1. Instead, use the <tool> element and a tool-id attribute.

Value description:

Text

Default value:

manual.

Used in:

<file>, <phase>, <alt-trans>.

tool-company

Tool company - The tool-company attribute specifies the company from which a tool originates.

Value description:

Text.

Default value:

Undefined.

Used in:

<tool>.

tool-id

Tool identifier - The tool-id attribute allows unique identification of a <tool> element. It is also used in other elements in the file to refer to the given <tool> element.

Value description:

Text.

Default value:

Undefined.

Used in:

<file>, <phase>, <alt-trans>, <tool>.

tool-name

Tool name - The tool-name attribute specifies the name of a given tool.

Value description:

Text.

Default value:

Undefined.

Used in:

<tool>.

tool-version

Tool version - The tool-version attribute specifies the version of a given tool.

Value description:

Text.

Default value:

Undefined.

Used in:

<tool>.

translate

Translate - The translate attribute indicates whether or not the text referred to should be translated.

Value description:

Boolean: yes or no.

Default value:

yes.

Used in:

<group>, <trans-unit>, <bin-unit>.

ts

Tool-specific data - The ts attribute allows you to include short data understood by a specific toolset. You can also use the <prop> element to define large properties at the element level.

Important: The ts attribute was DEPRECATED in version 1.1. Instead, use attributes defined in a namespace different from XLIFF. See the Extensibility section for more information.

Value description:

Text. No value defined by the standard.

Default value:

Undefined.

Used in:

<file>, <group>, <trans-unit>, <source>, <target>, <bin-unit>, <bin-source>, <bin-target>, <alt-trans>, <mrk>, <g>, <x/>, <bx/>, <ex/> , <bpt>, <ept>, <ph> , <it>.

uid

Unique ID - The uid attribute is used to provide a unique ID to identify the skeleton file.

Value description:

Text.

Default value:

Undefined.

Used in:

<external-file> .

unit

Unit - The unit attribute specifies the units counted in a <count> element.

Value description:

The pre-defined values are defined in the table below.

Value Description
word Refers to words.
page Refers to pages.
trans-unit Refers to <trans-unit> elements.
bin-unit Refers to <bin-unit> elements.
glyph Refers to glyphs.
item Refers to <trans-unit> and/or <bin-unit> elements.
instance Refers to the occurrences of instances defined by the count-type value.
character Refers to characters.
line Refers to lines.
sentence Refers to sentences.
paragraph Refers to paragraphs.
segment Refers to segments.
placeable Refers to placeables (inline elements).

In addition, user-defined values can be used with this attribute. A user-defined value must start with an "x-" prefix.

Default value:

Undefined.

Used in:

<count>.

version

XLIFF version - The version attribute is used to specify the format version of the XLIFF document. This corresponds to the version number of the XLIFF specification that is being adhered to.

Value description:

Text.

Default value:

1.2

Used in:

<xliff>.

xid

Extern Reference identifier - The xid attribute is used to link an inline element to a different <trans-unit> or <bin-unit> element. For example, to link the text within a code to a corresponding translation unit.

Value description:

The value of the referenced id .

Default value:

Undefined.

Used in:

<bpt>, <ept>, <it> , <ph>, <g>, <x/>, <bx/>, <ex/>, <sub> .

3.3.2. XML Namespace Attributes

xml:lang

Language - The xml:lang attribute specifies the language variant of the text of a given element. For example: xml:lang="fr-FR" indicates the French language as spoken in France.

Value description:

A language code as described in the [RFC 4646], the successor to [RFC 3066]. This declared value is considered to apply to all elements within the content of the element where it is specified, unless overridden with another instance of the xml:lang attribute. Unlike the other XLIFF attributes, the values for xml:lang are not case-sensitive. For more information see the section on xml:lang in the XML specification, and the erratum E11 (which replaces RFC 1766 by RFC 3066).

Default value:

Undefined.

Used in:

<xliff>, <note>, <prop>, <source>, <target>, <alt-trans>.

xml:space

White spaces - The xml:space attribute specifies how white spaces (ASCII spaces, tabs and line-breaks) should be treated.

Value description:

default or preserve. The value default signals that an application's default white-space processing modes are acceptable for this element; the value preserve indicates the intent that applications preserve all the white space. This declared intent is considered to apply to all elements within the content of the element where it is specified, unless overridden with another instance of the xml:space attribute.

For more information see the section on xml:space in the XML specification.

Default value:

default.

Used in:

<file>, <group>, <trans-unit>, <alt-trans>.

A. XLIFF Tree Structure

The following figure shows the possible structure as a tree. Each element is followed by notation indicating its possible occurrence according to the corresponding legend.

(legend: 1 = one
 + = one or more
 ? = zero or one
 * = zero, one or more)

<xliff>1
| |
| +--- [Extension Point]
| |
+--- <file>+
 |
 +--- <header>?
 | |
 | +--- <skl>?
 | | |
 | | +--- (<internal-file> | <external-file>)1
 | |
 | +--- <phase-group>?
 | | |
 | | +--- <phase>+
 | | |
 | | +--- <note>*
 | |
 | +--- <glossary>*
 | | |
 | | +--- (<internal-file> | <external-file>)1
 | |
 | +--- <reference>*
 | | |
 | | +--- (<internal-file> | <external-file>)1
 | |
 | +--- <count-group>*
 | | |
 | | +--- <count>*
 | |
 | +--- <tool>*
 | | |
 | | +--- [Extension Point]
 | |
 | +--- <prop-group>*
 | | |
 | | +--- <prop>*
 | |
 | +--- [Extension Point]
 | |
 | +--- <note>*
 |
 +--- <body>1
 |
 +--- <group>*
 | |
 | +--- <context-group>*
 | | |
 | | +--- <context>+
 | |
 | +--- <count-group>*
 | | |
 | | +--- <count>*
 | |
 | +--- <prop-group>*
 | | |
 | | +--- <prop>*
 | |
 | +--- [Extension Point]
 | |
 | +--- <note>*
 | |
 | +--- At least one of: (<group>* <trans-unit>* <bin-unit>*)
 |
 +--- <trans-unit>*
 | |
 | +--- <source>1
 | | |
 | | +--- [Inline Elements]
 | |
 | +--- <target>?
 | | |
 | | +--- [Inline Elements]
 | |
 | +--- <context-group>*
 | | |
 | | +--- <context>+
 | |
 | +--- <count-group>*
 | | |
 | | +--- <count>*
 | |
 | +--- <prop-group>*
 | | |
 | | +--- <prop>*
 | |
 | +--- <seg-source>?
 | | |
 | | +--- [Inline Elements]
 | |
 | +--- [Extension Point]
 | |
 | +--- <note>*
 | |
 | +--- <alt-trans>*
 | |
 | +--- <context-group>*
 | | |
 | | +--- <context>+
 | |
 | +--- <source>?
 | | |
 | | +--- [Inline Elements]
 | | | +--- <target>+
 | | |
 | | +--- [Inline Elements]
 | |
 | +--- <prop-group>*
 | | |
 | | +--- <prop>*
 | |
 | +--- <seg-source>?
 | | |
 | | +--- [Inline Elements]
 | |
 | +--- [Extension Point]
 | |
 | +---- <note>*
 |
 +--- <bin-unit>*
 |
 +--- <bin-source>1 & <bin-target>?
 | |
 | +--- (<internal-file> | <external-file>)1
 |
 +--- <context-group>*
 | |
 | +--- <context>+
 |
 +--- <count-group>*
 | |
 | +--- <count>*
 |
 +--- <prop-group>*
 | |
 | +--- <prop>*
 |
 +--- [Extension Point]
 |
 +--- <note>*
 |
 +--- <trans-unit>*

Struct_Extension_Elements

Inline Elements:

---+--- <ph>*
 | |
 | +--- <sub>*
 | |
 | +--- [Inline Elements]
 |
 +--- <it>*
 | |
 | +--- <sub>*
 | |
 | +--- [Inline Elements]
 |
 +--- <bpt>*
 | |
 | +--- <sub>*
 | |
 | +--- [Inline Elements]
 |
 +--- <ept>*
 | |
 | +--- <sub>*
 | |
 | +--- [Inline Elements]
 |
 +--- <g>*
 | |
 | +--- [Inline Elements]
 |
 +--- <x/>*
 | |
 | +--- [Inline Elements]
 |
 +--- <bx/>*
 | |
 | +--- [Inline Elements]
 |
 +--- <ex/>*
 | |
 | +--- [Inline Elements]
 |
 +--- <mrk>*
 |
 +--- [Inline Elements]

B. Schema

C. Changes Since Previous Version (Non-Normative)

The changes in this version relative to the previous version are as follows:

D. Naming Guidelines (Non-Normative)

The following naming guidelines were used in writing this specification.

D.1. Elements and Attributes

The following guidelines were used for element and attribute naming.

  1. Standard English letters.
  2. Lower case only.
  3. Hyphen is the preferred mean for creating composite names.
  4. Industry standard terminology should be followed where possible.

D.2. Attribute Values

Attribute values are case sensitive. It is recommended that lower-case values are used. The specification recommends a number of values for some attributes, these are all lower-case.

Where multiple attribute values are to be used in an XLIFF document, two approaches are used: For enumerated attributes (such as the purpose attribute of <context-group>) the separator must be a space. For other textual attributes based on string, the specification recommends the use of the semi-colon as a separator for values. For example, multiple contacts may be listed for a <file> with the attribute written thusly: contact-name="Frank Sinatra;Sammy Davis Jnr;Dean Martin" .

D.3. Processing Instructions

XLIFF reserves processing instructions that begin with "xliff-".

D.4. XLIFF File Extension

XLIFF documents use the .xlf extension. No other extension is recommended by the specification.

E. XLIFF Technical Committee (Non-Normative)

The XLIFF Technical Committee at OASIS is composed of the following members:

F. References

Normative

[CSS]

CSS Specifications. W3C (World Wide Web Consortium).

[IANA Charsets]

IANA Names for Character Sets. IANA (Internet Assigned Numbers Authority), Aug 2001

[ISO 639]

Codes for the Representation of Names of Languages. ISO (International Standards Organization), Nov 2001.

[ISO 3166]

Codes for the representation of names of countries and their subdivisions. ISO (International Organization for Standardization), Jun 2000.

[ISO 8601]

Representation of dates and times. ISO (International Organization for Standardization), Dec 2000.

[RFC 1341]

Multipurpose Internet Mail Extensions. IETF (Internet Engineering Task Force), Jun 1992.

[RFC 4646]

RFC 4646 Tags for the Identification of Languages. IETF (Internet Engineering Task Force), Sep 2006.

[XML 1.0]

Extensible Markup Language (XML) 1.0. W3C (World Wide Web Consortium).

[XML Names]

Namespaces in XML. W3C (World Wide Web Consortium), August 16, 2006.

Non-Normative

[ISO]

International Organization for Standardization Web site.

[LISA]

Localisation Industry Standards Association Web site.

[OASIS]

Organization for the Advancement of Structured Information Standards Web site.

[OpenTag 1.2]

OpenTag Format Specifications. ILE (International Language Engineering), Nov 1998.

[TMX]

Translation Memory eXchange (TMX). LISA (Localisation Industry Standards association).

[SRX]

Segmentation Rules eXchange (SRX). LISA (Localisation Industry Standards association).

[Unicode]

Unicode Consortium Web site.

[W3C]

World Wide Web Consortium Web site.