Template: OASIS:StateAssessment

This section specifies the template StateAssessment.

The specification comprises a SysML Block that represents the template and an associated Parametric Diagram that defines the templates and PLCS PSMTemplate objects instantiated by the StateAssessment template.

The specification comprises the following sections:

NOTE    An explanation of a template and its specification is provided in the Template overview

The StateAssessment template describes how to represent the fact that something has been observed or hypothesized to be in a given state. This is purely an observation or hypothesis which has not been confirmed by evidence such as a measurement.

For details on how represent an observed or asserted state, see See StateAssertion

The SysML Block Definition diagram in Figure 1 shows how State is represented in the PLCS PSM.

Figure 1 -  State model

No templates have been explicitly defined as being related to the StateAssessment template.

NOTE    The StateAssessment template may make reference to other templates as part of the Parametric Diagram. These are not listed here.

Figure 2 shows the SysML Block that represents the template. The Block is an abstraction representing a pattern of templates and PLCS PSMTemplate objects.

The properties, i.e. the SysML Block Part, Reference and Value properties, of the template's SysML Block are described in the Template Properties section.

The output ports shown on the template's SysML Block are described in the template output ports section.

The SysML Parametric diagrams for the template Block are shown in template parametric diagram section.

Figure 2 -  Template block definition diagram for StateAssessment

The following SysML Part, Reference, and Value properties are defined for this template:

References:
definition [1] (Block: Ap239Ap233Psm:ProxyItemSelect)
The reference data that identifies the state definition that the observed state is assessed to be in.
The reference data used in Block: Ap239Ap233Psm:ProxyItemSelect is restricted as follows:
RDL constraint 1:
The reference data for:
ExternalOwlObject.individual
is restricted to individuals that are members of the following class:
observedBy [0..*] (Block: Ap239Ap233Psm:OrganizationOrPersonInOrganizationSelect)
the person or organization that observed the state.
Parts:
id [0..1] (Template: OASIS:Identification)
An optional identification of the observed state.
The reference data used in Template: OASIS:Identification is restricted as follows:
RDL constraint 1:
The id must be classified as a state definition identification code.
The reference data for:
OASIS:Identification.role -> ExternalOwlClass.class
is restricted to the following class or a subclass:
description [0..1] (Template: OASIS:Descriptor)
An optional description of the observed state.
name [0..1] (Template: OASIS:Name)
An optional name of the observed state.
Values:
assessmentDateTime [0..1] (Block: Ap239Ap233Psm:DateTimeString)

The date or dateTime when the observed state was assessed to be a defined state.

NOTE    The assessmentDateTime and the observationDateTime may be the same

The following constraint, normally a uniqueness constraint, is applicable when instantiating the DateTimeString:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: XSDDATETIME
Specification: (OCL2.0)
self.matches('[0-9]{4}-[0-9]{2}-[0-9]{2}T[0-9]{2}:[0-9]{2}:[0-9]{2}Z')
observationDateTime [0..1] (Block: Ap239Ap233Psm:DateTimeString)
The date or dateTime when the state was observed.

The following constraint, normally a uniqueness constraint, is applicable when instantiating the DateTimeString:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: XSDDATETIME
Specification: (OCL2.0)
self.matches('[0-9]{4}-[0-9]{2}-[0-9]{2}T[0-9]{2}:[0-9]{2}:[0-9]{2}Z')

The following output ports are defined for this template:

stateDfn (Block: Ap239Ap233Psm:StateDefinition)
Enables the Block: Ap239Ap233Psm:StateDefinition instantiated by this template to be referenced when the template is used.
stateObs (Block: Ap239Ap233Psm:StateObserved)
Enables the Block: Ap239Ap233Psm:StateObserved instantiated by this template to be referenced when the template is used.
stateAssess (Block: Ap239Ap233Psm:StateAssessment)
Enables the Block: Ap239Ap233Psm:StateAssessment instantiated by this template to be referenced when the template is used.

There are no constraints defined for this template.

This section describes the template's Parametric Diagrams. Each diagram details the pattern of templates and PLCS PSMTemplate objects that are required to represent the template StateAssessment.

The public properties, i.e. those visible in the template's SysML block (See Figure 2) are shown on the left of a Parametric Diagram.

NOTE    Restrictions on the reference data to be set on the public properties is defined in the Template Properties section.

The output ports are shown on the right of a Parametric Diagram.

PLCS PSM objects are shaded khaki and Templates are shaded light green in a Parametric Diagram.

Figure 2 -  StateAssessment
Figure 3 -  StateAssessment ObservedBy

The following blocks are instantiated by this template and bound to private parts of the template as shown in the Parametric Diagram section:

Private Reference Property:stateDefinition [1] (Block: Ap239Ap233Psm:StateDefinition)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the StateDefinition:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: UR1
Specification: (OCL2.0)
StateDefinition::allInstances()->isUnique(definition)
Private Part Property:stateAssessment [1] (Block: Ap239Ap233Psm:StateAssessment)
Private Part Property:stateObserved [1] (Block: Ap239Ap233Psm:StateObserved)
Private Part Property:dateAsg [0..1] (Block: Ap239Ap233Psm:DateTimeAssignment)
Private Reference Property:classDateActualAssessment [0..1] (Block: Ap239Ap233Psm:ExternalOwlClass)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlClass:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: ur1
Specification: (OCL2.0)
ExternalOwlClass::allInstances()->isUnique(class)
Private Part Property:dateObsClassifier [0..1] (Template: OASIS:Classifier)
Private Part Property:dateAssessClassifier [0..1] (Template: OASIS:Classifier)
Private Part Property:dateAsg1 [0..1] (Block: Ap239Ap233Psm:DateTimeAssignment)
Private Reference Property:classPersOrgAsgActualObserver [0..1] (Block: Ap239Ap233Psm:ExternalOwlClass)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlClass:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: ur1
Specification: (OCL2.0)
ExternalOwlClass::allInstances()->isUnique(class)
Private Part Property:persOrgAsgn [0..*] (Block: Ap239Ap233Psm:OrganizationOrPersonInOrganizationAssignment)
Private Part Property:predictingOrg [0..*] (Template: OASIS:Classifier)
Private Part Property:combNameAndDesc [0..1] (Constraint Block: OASIS:Name:CombineNamesAndDescriptors)

Figure 4 shows the instances that have been instantiated in the template. These are used to set the default value of blocks.

Instance diagram
Figure 4 -  Model instance diagram for StateAssessment

The following instances have been created:

There are no constraint blocks defined in this template.

No example data sets have been provided for this Template.