Template: OASIS:ActualActivity

This section specifies the template ActualActivity.

The specification comprises a SysML Block that represents the template and an associated Parametric Diagram that defines the templates and PLCS PSMTemplate objects instantiated by the ActualActivity template.

The specification comprises the following sections:

NOTE    An explanation of a template and its specification is provided in the Template overview

The ActualActivity template describes how to represent a record of an activity that has at least started and may have finished - an actual activity.

It can be used to record any information about an actual activity, such as who has performed and/or reported the activity, what method (a specification of how to perform an activity) was followed, and when the activity was performed. It is mandatory to assign an identifier or name to the activity, and a start time, and to relate it to a method (activity method).

This template should not be used for recording activities that are performed by a product. e.g. a sortie flown by an aircraft, nor activities managed by a WorkOrder and DirectedActivity.

The ActualActivity is one of a set of templates used to represent work and activities. These are summarized in Figure 1 which shows that the model contains templates for:

The actual templates are:

Figure 1 -  Templates representing activities

The SysML Block Definition diagram in Figure 2 shows how a activity is represented in the PLCS PSM.

Figure 2 -  Activity model

No templates have been explicitly defined as being related to the ActualActivity template.

NOTE    The ActualActivity template may make reference to other templates as part of the Parametric Diagram. These are not listed here.

Figure 3 shows the SysML Block that represents the template. The Block is an abstraction representing a pattern of templates and PLCS PSMTemplate objects.

The properties, i.e. the SysML Block Part, Reference and Value properties, of the template's SysML Block are described in the Template Properties section.

The output ports shown on the template's SysML Block are described in the template output ports section.

The SysML Parametric diagrams for the template Block are shown in template parametric diagram section.

Figure 3 -  Template block definition diagram for ActualActivity

The following SysML Part, Reference, and Value properties are defined for this template:

References:
activityInputs [0..*] (Block: Ap239Ap233Psm:ActivityAssignmentSelect)
the inputs to the activity
activityOutputs [0..*] (Block: Ap239Ap233Psm:ActivityAssignmentSelect)
the outputs or results from the activity.
plannedActivity [0..1] (Block: Ap239Ap233Psm:Activity)
the planned activity that resulted in this activity being undertaken.
methodUsed [0..1] (Block: Ap239Ap233Psm:ActivityMethod)
the method by which the activity was undertaken
performedBy [0..*] (Block: Ap239Ap233Psm:OrganizationOrPersonInOrganizationSelect)
the person or organization that performed the activity
resourcesUsed [0..*] (Block: Ap239Ap233Psm:ResourceAsRealized)
the resources that were used to perform the activity
location [0..*] (Block: Ap239Ap233Psm:Location)
The location where the activity was performed.
contract [0..*] (Template: OASIS:Contract)
The contract under which the activity was performed.
project [0..*] (Template: OASIS:Project)
The project under which the activity was performed.
Parts:
ids [1..*] (Template: OASIS:Identification)
The collection of identifiers of the activity.
The reference data used in Template: OASIS:Identification is restricted as follows:
RDL constraint 1:
The id must be classified as an Activity_identification_code or a subclass thereof.
The reference data for:
OASIS:Identification.role -> ExternalOwlClass.class
is restricted to the following class or a subclass:
classifications [0..*] (Template: OASIS:Classifier)
The classification of the activity.
The reference data used in Template: OASIS:Classifier is restricted as follows:
RDL constraint 1:
The reference data for:
OASIS:Classifier.class -> ExternalOwlClass.class
is restricted to the following class or a subclass:
descriptions [0..*] (Template: OASIS:Descriptor)
the descriptions of the activity
status [0..1] (Template: OASIS:StateAssertion)
the status of the activity
The reference data used in Template: OASIS:StateAssertion is restricted as follows:
RDL constraint 1:
The status is represented subclasses of State_of_activity.
The reference data for:
OASIS:StateAssertion.sameAs -> ExternalOwlObject.individual
is restricted to the following class or a subclass:
names [0..*] (Template: OASIS:Name)
The names of the activity
Values:
dateStarted [1] (Block: Ap239Ap233Psm:DateTimeString)
The date and time when the activity started.

The following constraint, normally a uniqueness constraint, is applicable when instantiating the DateTimeString:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: XSDDATETIME
Specification: (OCL2.0)
self.matches('[0-9]{4}-[0-9]{2}-[0-9]{2}T[0-9]{2}:[0-9]{2}:[0-9]{2}Z')
dateCompleted [0..1] (Block: Ap239Ap233Psm:DateTimeString)
The date and time when the activity ended.

The following constraint, normally a uniqueness constraint, is applicable when instantiating the DateTimeString:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: XSDDATETIME
Specification: (OCL2.0)
self.matches('[0-9]{4}-[0-9]{2}-[0-9]{2}T[0-9]{2}:[0-9]{2}:[0-9]{2}Z')

The following output ports are defined for this template:

activityActual (Block: Ap239Ap233Psm:ActivityActual)
Enables the Block: Ap239Ap233Psm:ActivityActual instantiated by this template to be referenced when the template is used.

There are no constraints defined for this template.

This section describes the template's Parametric Diagrams. Each diagram details the pattern of templates and PLCS PSMTemplate objects that are required to represent the template ActualActivity.

The public properties, i.e. those visible in the template's SysML block (See Figure 3) are shown on the left of a Parametric Diagram.

NOTE    Restrictions on the reference data to be set on the public properties is defined in the Template Properties section.

The output ports are shown on the right of a Parametric Diagram.

PLCS PSM objects are shaded khaki and Templates are shaded light green in a Parametric Diagram.

Figure 2 -  ActualActivity
Figure 3 -  ActualActivityDates
Figure 4 -  ActualActivityIO
Figure 5 -  ActualActivityStatus
Figure 6 -  ActualActivityPerformedBy
Figure 7 -  ActualActivityResources
Figure 8 -  ActualActivity Contract
Figure 9 -  ActualActivity Project
Figure 10 -  ActualActivity Location

The following blocks are instantiated by this template and bound to private parts of the template as shown in the Parametric Diagram section:

Private Part Property:activityActual [1] (Block: Ap239Ap233Psm:ActivityActual)
Private Part Property:activityHappening [0..1] (Block: Ap239Ap233Psm:ActivityHappening)
Private Part Property:actualStartDateAsg [1] (Block: Ap239Ap233Psm:DateTimeAssignment)
Private Part Property:actualEndDateAsg [0..1] (Block: Ap239Ap233Psm:DateTimeAssignment)
Private Reference Property:classActualStart [1] (Block: Ap239Ap233Psm:ExternalOwlClass)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlClass:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: ur1
Specification: (OCL2.0)
ExternalOwlClass::allInstances()->isUnique(class)
Private Part Property:classifyActualStartDate [1] (Template: OASIS:Classifier)
Private Part Property:classifyActualEndDate [0..1] (Template: OASIS:Classifier)
Private Reference Property:classActualEnd [0..1] (Block: Ap239Ap233Psm:ExternalOwlClass)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlClass:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: ur1
Specification: (OCL2.0)
ExternalOwlClass::allInstances()->isUnique(class)
Private Part Property:stateAsgn [0..1] (Block: Ap239Ap233Psm:StateAssignment)
Private Part Property:persOrgAsgn [0..*] (Block: Ap239Ap233Psm:OrganizationOrPersonInOrganizationAssignment)
Private Reference Property:classPerformedBy [0..1] (Block: Ap239Ap233Psm:ExternalOwlClass)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlClass:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: ur1
Specification: (OCL2.0)
ExternalOwlClass::allInstances()->isUnique(class)
Private Part Property:classifiyPersOrgAsg [0..*] (Template: OASIS:Classifier)
Private Part Property:inputActAsg [0..*] (Block: Ap239Ap233Psm:ActivityAssignment)
Private Part Property:outputActAsg [0..*] (Block: Ap239Ap233Psm:ActivityAssignment)
Private Reference Property:classActivityOutput [0..1] (Block: Ap239Ap233Psm:ExternalOwlClass)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlClass:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: ur1
Specification: (OCL2.0)
ExternalOwlClass::allInstances()->isUnique(class)
Private Reference Property:classActivityInput [0..1] (Block: Ap239Ap233Psm:ExternalOwlClass)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlClass:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: ur1
Specification: (OCL2.0)
ExternalOwlClass::allInstances()->isUnique(class)
Private Part Property:classifyActivityInput [0..*] (Template: OASIS:Classifier)
Private Part Property:classifyActivityOutput [0..*] (Template: OASIS:Classifier)
Private Part Property:resourceAsRealizedAsg [0..*] (Block: Ap239Ap233Psm:ResourceAsRealizedAssignment)
Private Part Property:classifyResourceAsg [0..*] (Template: OASIS:Classifier)
Private Reference Property:classResourceAsRealizedUsedBy [0..1] (Block: Ap239Ap233Psm:ExternalOwlClass)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlClass:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: ur1
Specification: (OCL2.0)
ExternalOwlClass::allInstances()->isUnique(class)
Private Reference Property:classActivityPerformedAt [0..1] (Block: Ap239Ap233Psm:ExternalOwlClass)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlClass:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: ur1
Specification: (OCL2.0)
ExternalOwlClass::allInstances()->isUnique(class)
Private Part Property:classifyActivityPerformedAt [0..*] (Template: OASIS:Classifier)
Private Part Property:locationAssignment [0..*] (Block: Ap239Ap233Psm:LocationAssignment)
Private Reference Property:classActivityPerformedOnProject [0..1] (Block: Ap239Ap233Psm:ExternalOwlClass)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlClass:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: ur1
Specification: (OCL2.0)
ExternalOwlClass::allInstances()->isUnique(class)
Private Part Property:classifyActivityPerformedOnProject [0..*] (Template: OASIS:Classifier)
Private Part Property:projectAssignment [0..*] (Block: Ap239Ap233Psm:ProjectAssignment)
Private Reference Property:classActivityPerformedUnderContract [0..1] (Block: Ap239Ap233Psm:ExternalOwlClass)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlClass:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: ur1
Specification: (OCL2.0)
ExternalOwlClass::allInstances()->isUnique(class)
Private Part Property:classifyActivityPerformedOnContract [0..*] (Template: OASIS:Classifier)
Private Part Property:contractAssignment [0..*] (Block: Ap239Ap233Psm:ContractAssignment)
Private Part Property:combNameAndDesc [1] (Constraint Block: OASIS:Name:CombineNamesAndDescriptors)

Figure 11 shows the instances that have been instantiated in the template. These are used to set the default value of blocks.

Instance diagram
Figure 11 -  Model instance diagram for ActualActivity

The following instances have been created:

There are no constraint blocks defined in this template.

No example data sets have been provided for this Template.