〚Instructions and other notations that are not the texts themselves are included in these brackets.〛

Removed text is shown in light red strike-through.Inserted text is shown in light blue underlined. Other text is shown without change and to provide sufficient context for the changes 〚...〛

N1078:10
3798

COR2
WG6

Style changes are shown in magenta, double-underlined. The text is shown in the desired resulting style.

N0942:50

1.0-1

〚Change, in the Prefix column of Table 1〛

drawing

N1309:9

COR2

〚Change the entire section〛

1.6 White-Space Processing and EOL Handling

ODF processing of whitespace characters is in conformance with the provisions of In conformance with the W3C XML specification [XML1.0].,

In addition, ODF processors shall ignore all element children ([RNG] section 5, Data Model) of ODF-defined elements that are strings consisting entirely of whitespace characters and which do not satisfy a pattern of the ODF schema definition for the element.

Any special treatment of additional occurrences of white-space characters depend on the specific definition of individual ODF elements, attributes, and their datatypes. See, in particular, section 5.1.1. optional white-space characters that are contained in elements that have element content (in other words that must contain elements only but not text) are ignored. This applies to the following white-space and end-of-line (EOL)[UNICODE] characters:

. . . 〚deleting the remainder of the section〛. . .

As a consequence of the white-space and EOL processing rules, any CARRIAGE RETURN characters that are contained either in the text content of an element or in an attribute value must be encoded by the character entity 
. The same applies to the HORIZONTAL TABULATION and LINE FEED characters if they are contained in an attribute value.

N1309:10

COR2

-

〚Change the first paragraph of the section〛

The content models of the five root elements is summarized in the following table. Note that <office:document> may contain all supported top-level elements. AllNone of the four subdocument root elements contain the complete data, but four combined dotogether contain the same information as an <office:document> element that contains the same subdocument root elements.

N0942:41

Y

〚Change the first paragraph of the subsection〛

All root elements take an office:version attribute, which indicates which version of this specification it complies with. The version number is in the format revision.version. If the file has a version known to an XML processor, it may validate the document. Otherwise, it is optional to validate the document, but the document must be well formed.

N1309:6

〚Change the fifth and sixth paragraphs of the subsection〛

A generating application that stores soft page breaks shall indicate this by setting the text:use-page-breaks attribute to true. A generating application that does not store soft page breaks shall indicate that by omitting this attribute, or by setting it to false.

An application that does not support pagination and soft page-breaks, that modifies an OpenDocument file, which includes soft page-breaks, shall at least set the text:use-page-breaks attribute to false (or remove it). It should also remove the <text:soft-page-break> elements from the document but is not required to do so.

3694

WG6

Y

〚Change, in the last paragraph〛

The manner in which the language is represented is similar toThe syntax and semantics of the language tag are specifieddescribed in [RFC3066]. It consists of a two or three letter Language Code taken from the ISO 639 standard optionally followed by a hyphen (-) and a two-letter Country Code taken from the ISO 3166 standard.

N1078:1

〚Change, in the schema〛

〚 … 〛

<optional>

<attribute name="meta:frame-count">

<ref name="nonNegativeInteger"/>

</attribute>

</optional>

<optional>

<attribute name="meta:sentence-count">

<ref name="nonNegativeInteger"/>

</attribute>

</optional>

<optional>

<attribute name="meta:syllable-count">

<ref name="nonNegativeInteger"/>

</attribute>

</optional>

<optional>

<attribute name="meta:non-whitespace-character-count">

<ref name="nonNegativeInteger"/>

</attribute>

</optional>

3743

〚Change, at the end of the last paragraph〛

〚 … 〛To avoid saving the password directly into the XML file, only a hash value of the password is stored. The hashing is implementation-dependent.

N1078:18

〚In some forms of the ODF 1.1 specification, there may need to be some or all of these changes to have the correct form of the last sentence. Change, in the last sentence of the section〛

See section 2.3.1:2.3.1 Use Soft Page BreaksUse Soft Page Breaks for details regarding soft page breaks.

2712

WG6

〚Change, in the last line preceding the start of the “Space Character Subsection〛

, in other words they are processed in the same way that [HTML4] processes them.

2713

TC

〚Change, in the beginning of the list〛

• Name

• Title

• 〚 … 〛

3797

WG6

Y

〚Change the first paragraph〛

OpenDocument text documents can contain〚 … 〛Most variable fields support different value types, such as numbers, dates, strings, and so on. In the OpenDocument file format, a variable must be declared at the beginning of a document.

N1309:1
N1309:2

COR2

-

〚Change the first paragraph〛

The text:fixed attribute specifies whether or not the value of a field element is fixed. If the value of a field is fixed, the value of the field element to which this attribute is attached is preserved in all future edits of the document. If the value of the field is not fixed, the value of the field may be replaced by a new value when the document is edited. The defined values of the text:fixed attribute are:

• true: value of the field element where this attribrute appears is preserved.

• false: value of the field element where this attribute appears may be changed.

N1078:2

COR2

-

〚Change the text of the first list item〛

• value
  This value displays the value of the field. Some fields do not support this value. In these cases, the text:display attribute only takes the values value or none, and value or formula, respectively.

N0942:40

COR1

-

〚Change the text of the second list item〛

• formula

  This value allows the display of the formula rather than the value of the field. Some fields do not support this value. In these cases, the text:display attribute only takes the values value or none, and value or formula, respectively. This value is not supported by all kinds of fields.

N0942:40

COR1

-

〚Change at the end of the only paragraph〛

〚 … 〛See section 7.1 for more information on index marks.

N1078:3

COR2

-

〚Change the only paragraph〛

The text:index-scope attribute determines whether the table-of-content is generated for the whole document, or only for the current chapter.specifies whether index entries from an entire document or from the chapter that contains the <text:table-of-content> element are used to construct a table of contents. The default value and the determination of the chapter are implementation-dependent.

N1078:5

COR2

-

〚Change the end of first paragraph〛

〚 … 〛for any outline level. (See below.)

N1078:6

COR2

-

〚Change the only paragraph〛

Each object contained in a text document has a name. In addition, images also have a caption. The image caption or the image name can be gathered for the index of illustrations.The text:use-caption attribute specifies whether the captions or names of illustrations are used for an index.

The defined values of the text:use-caption attribute are:

• true: illustration captions are used for an index.

• false: illustration names are used for an index.

N1078:7

COR2

-

〚Change the entire text〛

This attribute can have a value of true or false.

If the value is true, the entries are gathered at the outline level of the source element to which they refer.

If the value is false, all index entries gathered are at the top outline level. For example, if an image appears in section 1.2.3, the entry for the image is located at outline level 3.

The text:copy-outline-levels attribute specifies whether index entries are indented according to the outline level of their source. The defined values for the text:copy-outline-levels attribute are:

• false: no indentation is added.

• true: index entries are indented according to the outline level of their source.

N1078:8

1.0-02

N

〚Insert a new paragraph after the only one〛

〚 … 〛an XLink, which points to the resource containing the list of terms.

The format of an index mark file is implementation-dependent.

N1078:9

COR2

-

〚Change the first sentence〛

There are seveneight types of index entryies, as follows:

N1078:10
3798

COR2
WG6

-

〚Change, at the end of the first paragraph〛

〚 … 〛If a table is protected, all of the table's cell elements and the cell elements with a style:cell-protect attribute set to true a different value than none are protected.

N1078:11

COR2

-

〚Change, at the end of the second paragraph〛

〚 … 〛only a hash value of the password is stored within the table:protection-key attribute. The hashing is implementation-dependent.

N1078:18

COR2

-

〚Change, in the first paragraph〛

〚 … 〛Cells contained in the row that don't have a table:style-namestyle name attribute use this default cell style.

3799

WG6

Y

〚Change, in the only paragraph〛

The table:visibility attribute specifies whether the row is visible, filtered, or collapsed. Filtered and collapsed rows are not visible. Filtered rows are invisible, because a filter is applied to the table that does not select the table row. Collapsed rows have been made invisible by invisible in the UI directly.the conditions under which the table row is visible. The values of the attribute are:

• visible: the row is visible

• collapse: the row is not visible

• filter: the row is not visible as the result of applying a filter (see section 8.7)

The default is visible.

N1078:12
N1078:13

COR2

-

〚Change, in the last paragraph, following the schema fragment〛

See section 8.5.3 for more information on cell content validation and the <table:cell-content-validation> element.

3800

WG6

Y

〚Change, in the first sentence〛

The tableoffice:value-type attribute specifies the type of value that can appear in a cell.

N1078:14

COR2

-

〚Change, in the first paragraph〛

The office:value attribute specifies the current numeric value of a cell. This attribute is only evaluated for cells that contain the following data typespresent only whenever there is an office:value-type attribute with one of the following values:

N1078:14

COR2

-

〚Change, in the first paragraph〛

The tableoffice:currency attribute specifies the current currency value of a cell. The value of this attribute is usually currency information such as DEM or EUR. This attribute is only evaluated for cells whose data type is currencythe currency system in which the value of the office:value attribute is expressed. The value of this attribute is usually a currency identifier, such as “DEM” or “EUR”. This attribute may be present only when the office:value-type attribute value is “currency”.

N1078:14

1.0-2

N

〚Change, in the first paragraph〛

〚 … 〛This attribute is present only evaluated for cells whose data typewhenever the office:value-type attribute is “date”.

N1078:14

COR2

-

〚Change, in the first paragraph〛

〚 … 〛This attribute is present only evaluated for cells whose data typewhenever the office:value-type attribute is “time”.

N1078:14

COR2

-

〚Change, in the first paragraph〛

〚 … 〛This attribute is present only evaluated for cells whose data typewhenever the office:value-type attribute is “boolean”.

N1078:14

COR2

-

〚Change, in the first paragraph〛

〚 … 〛This attribute ismay be present only evaluated for cells whose data typewhenever the office:value-type attribute is “string”.

N1078:14

COR2

-

〚Change, in the first paragraph〛

The table:protected attribute protects the table cells. 〚 … 〛

〚Change, in the last paragraph〛

〚 … 〛 the tablestyle:cell-protect attribute for table cell styles 〚 … 〛

N1078:15

COR2

-

〚Change, in the first paragraph〛

〚 … 〛cells that don't have a table:style-namestyle name attribute use this style when there is no default cell style specified for the cell's row as well.

3801

WG6

Y

〚Change, in the first paragraph〛

The <table:shapes> element contains all graphic shapes with an anchor on the table this element is a child ofthe elements that represent graphic shapes (see section 9.2) that are anchored on a table where this element occurs.〚 … 〛

N1078:16

COR2

-

〚Change, in the first paragraph〛

The <table:detective> element contains information about what relationships between the current cell and other cells are revealed in the presentation of the table.has two purposes. One the one hand, it contains information about relations that exist between table cells because of formulas and that should be highlighted in the UI. On the other hand, the element contains information about cells that are highlighted currently in the UI either because of the relations mentioned above or because of error conditions.

N1078:17

COR2

-

〚Change, in the first paragraph〛

The <table:operation> element specifies both the type of detective operation that leads to the discovery of relationships between cells (table:name attribute) and the order in which those operations are applied (table:index attribute). Once relationships between cells have been discovered, those cells are highlighted to show those relationships.that certain relations that exist between the cell the element is a child of and other cells should be made visible or invisible in the UI. One and the same detective operation can be applied multiple times to the same cell. In this case, the second operation is applied to the resulting cells of the first operation and so on. This means that an operation not necessarily is applied to the cell the operation is defined in, but also to other cells, and that it therefor can interact with operations defined in other cells. This especially applies to operations that make relations invisible. To get a determinate behavior, operations have an index and are applied in the order of that index. The attributes associated with the <table:operation> element are:

N1078:17

COR2

-

〚Change, in the only paragraph〛

The table:name attribute specifies the name of athe detective operation. Possible names are trace-dependents , remove-dependents, trace-precedents, remove-precedents and trace-errors. trace-dependents and remove-dependents displays or hides cells that use the value of the current cell in their formula. Trace-precedents and remove-precedents displays or hides cells whose value is used in the formula of the current cell. Trace-errors displays cells that cause an error while calculating the result of the current cell's formula.

The defined values for the table:name attribute are:

• remove-dependents: removes highlighting from cells that use the value of the current cell in their formula

• remove-precedents: removes highlighting from cells whose values are use in the formula of the current cell.

• trace-dependents: highlights cells that use the value of the current cell in their formula.

• trace-errors: highlights cells that cause an error while calculating the result of the current cell's formula.

• trace-precedents: highlights cells whose values are use in the formula of the current cell.

The nature of the highlighting imposed or removed from cells as the result of detective operations is implementation dependent.

N1078:17

COR2

-

〚Change, at the end of the only paragraph〛

〚 … 〛a hash value of the password is stored. The hashing is implementation-dependent.

N1078:18

COR2

-

〚Change the only paragraph〛

The table:search-criteria-must-apply-to-whole-cell attribute specifies whether a search pattern from the table:value attribute matches the entire content of a cellor not the specified search criteria, according to the regular expression used, must apply to the entire cell contents. The defined values of the table:search-criteria-must-apply-to-whole-cell are:

• false: a search pattern can match any substring at any position in a cell.

• true: a search pattern must match the entire content of a cell.

The table:search-criteria-must-apply-to-whole-cell attribute is only used with the <table:filter-condition> element when its table:data-type attribute has the value text and its table:operator attribute has one of the values:

• match (i.e. matches)

• !match (i.e. does not match)

• = (i.e. equal to)

• != (i.e. not equal to).

N1078:20

COR2

-

〚 Insert after the only paragraph〛

〚 … 〛enabled for character string comparisons and when searching.

The syntax and semantics of the regular expressions are implementation-dependent.

N1309:4

COR2

-

〚 Change the entire text〛

The table:condition attribute specifies the condition that must evaluate to “true” for all cells the validation rule is applied to. The value of this attribute should be a namespace prefix, followed by an implementation-dependent Boolean expression.

A typical syntax of the expression may be similar to the XPath syntax. The following are valid conditions:

• Condition ::= ExtendedTrueCondition | TrueFunction 'and' TrueCondition

• TrueFunction ::= cell-content-is-whole-number() | cell-content-is-decimal-number() | cell-content-is-date() | cell-content-is-time() | cell-content-is-text()

• ExtendedTrueCondition ::= ExtendedGetFunction | cell-content-text-length() Operator Value

• TrueCondition ::= GetFunction | cell-content() Operator Value

• GetFunction ::= cell-content-is-between(Value, Value) | cell-content-is-not-between(Value, Value)

• ExtendedGetFunction ::= cell-content-text-length-is-between(Value, Value) | cell-content-text-length-is-not-between(Value, Value) | cell-content-is-in-list( StringList )

• Operator ::= '<' | '>' | '<=' | '>=' | '=' | '!='

• Value ::= NumberValue | String | Formula

• StringList ::= StringList ';' String | String

• A Formula is a formula without an equals (=) sign at the beginning. See section 8.1.3 for more information.

• A String comprises one or more characters surrounded by quotation marks.

• A NumberValue is a whole or decimal number. It must not contain comma separators for numbers of 1000 or greater.

N1078:21

COR2

-

〚 Insert after the only paragraph〛

〚 … 〛stdevp, sum, var and varp.

These functions are implementation-dependent.

N1078:23

COR2

-

〚 Change in the top row of the Example table〛

〚 … 〛 G | GH | I

N1078:24

COR2

-

〚 Change in the only paragraph〛

Data pilot tables allow it to analyze and evaluate data contained in spreadsheet tablesenable users to analyze and evaluate data extracted from a range of structured data sources, such as spreadsheet tables, database tables, or external service components. The data pilot tables element 〚 … 〛

N1078:22

COR2

-

〚 Insert after the only paragraph〛

〚 … 〛that no function is applied at all.

These functions are implementation-dependent.

N1078:23

COR2

-

〚 Change in the last sentence of the text〛

〚 … 〛The value -1 means that no hierarchy should be applied at all.

N1078:26

COR2

-

〚 Insert after the only paragraph〛

〚 … 〛sum, var and varp.

These functions are implementation-dependent.

N1078:23

COR2

-

〚 Insert after the only paragraph〛

〚 … 〛sum, var and varp.

These functions are implementation-dependent.

N1078:23

COR2

-

〚Change the text〛

The <table:change-deletion> element specifiesd the id of a previously tracked change that gets deleted by the current change.

N0942:61

COR1

-

〚Change the text〛

The table:position attribute specifies the position where the deletion was made in the table. Depending on the deletion type, Iit is either the number of a row, a column or a table.

N0942:62

COR1

-

〚Change, in the first line〛

The change track table cells additionally supports 〚 … 〛

N0942:63

COR1

-

〚Change, in the sentence immediately after the schema fragment〛

The <draw:layer> element> may contain the following elements:

3359

WG6

Y

〚Change, in the first list item〛

• Defines properties such as the size and borders of the drawing page

N0942:64

COR1

-

〚Change, near the bottom of the example〛

<presentation:notes>

<draw:text ...>This is a note</draw:text>

</presentation:notes>

</draw:page>

</office:body>

N0942:65

COR1

-

〚Change, in the sentence immediately after the schema fragment〛

The attributes that may be associated with the <draw:regular-polygon> element are:

3364

WG6

Y

〚Change, in the last sentence〛

In general, if r is the radius of the polygon, and s is the sharpness, the inner corners are located on an ellipse whosethat's radius is r(100-s)/100.

N0942:65

COR1

-

〚Change, in the last sentence〛

Some implementations may only supports a subset 〚 … 〛

N0942:42

COR1

-

〚Change, in the last sentence〛

If this optional attribute isare not set, the position and 〚 … 〛

N0942:43

COR1

-

〚Change, in the first paragraph〛

The <draw:connector> element represents a series of lines that are connected to the glue points of two other shapesconnected set of one or more lines, that visually connects a start and an end point.

Start and/or end points can be assigned to glue points (see section 9.2.19) or absolute positions.

N1078:25

COR2

-

〚Change, in the first paragraph〛

The <draw:measure> element represents a shape that is used to measure distances in drawings. The layout of the measure shape is implementation-dependent.

N1078:27

COR2

-

〚Change, in the first line〛

The attributes draw:control attribute specifies the control

〚 … 〛

N0942:44

COR1

-

〚Change, in the entire text〛

The draw:caption-id attribute establishes a relationship between a drawing objects and its caption. It takes a value of type IDREF. The value forof the draw:caption-id attribute is the target ID assigned to the <draw:text-box> (see section 9.3.1) used to represent the corresponding caption.

When a caption is assigned by a user agent, an id must be assigned to the element containing the text used to caption a drawing element. The drawing element being captioned must then be assigned the draw:caption-id attribute with an IDREF equivalent to the id <draw:text-box> containing the captioning text, thus establishing a relationship between the captioned text and the object captioned as needed for accessibility. Removing the caption should result in removing the draw:caption-id attribute of the object that was being captioned.

If the user agent supports a platform which provides a draw:caption-id relationship in its accessibility API, this relationship for captions should be used to fulfill the relationship.

See appendix E for guidelines how to use this attributeon the use of this provision to support accessibility.

3365

3366
3367

TC

N

〚Change, in the first sentence〛

The following defined attributes are common for all shapes that supports styles and no text.

N0942:45

COR1

-

〚Change, in the last sentence〛

The following defined attributes are common for all shapes that supports styles and text.

N0942:46

COR1

-

〚Change, in the first sentence〛

The svg:x and svg:y attributes specifyies the position

〚 … 〛

N0942:47

COR1

-

〚Change, in the first sentence〛

The attribute draw:align specifies the alignment behavior of the glue point if the drawing object is resized and the shape edge to which the glue point's position relatesdefines the horizontal and vertical edges to which a glue point with absolute position aligns.

N0942:48

COR1

-

〚Change, in the second sentence〛

The value horizontal means thatthe the connection line may escape to the left or to the right, the value vertical means that the connection may escape up or down.

N0942:49

COR1

-

〚Change the last sentence of the section〛

It is further supported byThe <svg:title> and <svg:desc> elements are also usable with layers (see section 9.1.3) and client side image maps (see section 9.3.10).

3368

TC

N

〚Change, in the first sentence〛

A frame is a rectangular container where that contains

〚 … 〛

N0942:50

COR1

-

〚Change, in the third list item after the schema fragment, by inserting a section and subsection reference〛

• Presentation class – see section 9.6.1 Class

3802

WG6

Y

〚Change, in the fifth paragraph〛

The value scale-min equals the value scale, except that the

〚 … 〛

N0942:52

COR2

-

〚Change, at the end of the last paragraph〛

〚 … 〛real width and heights in the svg:width and svg:height or /fo:min-height attributes.

N0942:53

COR1

-

〚Change, in the last paragraph〛

〚 … 〛This does not aeffect style and position information. ThatThis is, the frame that has the 〚 … 〛

N0942:54

N0942:55

COR1

-

〚Change, in the only paragraph〛

The fo:min-height and fo:min-width attributes specify a minimum height andor width for a text box. If they are existing, they overwrite the height andor width of a text box

〚 … 〛

N0942:56

N0942:57

COR1

-

〚Change,in the last item of the first list and the paragraph just before the schema fragment〛

• Objects that do not have an XML representation. These objects only have a binary representation., For example, an OLE object has no XML representationAn example for this kind of objects OLE objects (see [OLE]).

The <draw:object> element represents objects that have an XML representation. 〚 … 〛

N0942:58

N0942:59

COR1

-

〚Change,in the first list item〛

• The xlink:href attribute links to the object representation, as follows:

  • For objects that have an XML representation, the link references the sub package of the object. The object is contained within this sub page exactly as it would as it is a document of its own.For objects that have an XML representation, the representation of the object is equivalent to a separate document representing that object, except it is stored in a folder in the document package. The link references that folder.

N0942:60
3814

COR1
WG6

-
N

〚NOTE: In ODF 1.0 (and COR1), there was a section 9.3.9 that is not present in ODF 1.1 and is also removed in AMD1. The ODF 1.1 section 9.3.9 corresponds to section 9.3.10 in COR1.]

Change,in the first paragraph〛

Frames may behave like hyperlinks. Such hyperlinks are represented by the <draw:a> element, where, the element's content 〚 … 〛

N0942:1

COR1

-

〚Change,in the last paragraph〛

〚 … 〛 If the value of the this attribute is _blank, the xlink:show attribute value is new. If the value of the this attribute is any of the other 〚 … 〛

N0942:2

N0942:3

COR1

-

〚NOTE: In ODF 1.0 (andCOR1), there was a section 9.3.9 that is not present in ODF 1.1 and is also removed in AMD1. The ODF 1.1 section 9.3.10 corresponds to section 9.3.11 in COR1.

Change,in the first list item〛

• Link, including an IRI and link target frame.

N0942:4

COR1

-

〚Insert, as the first paragraph of the section〛

3D shapes are used to define geometry inside coordinate systems. All ODF coordinate systems are right-handed. Geometry is represented by a tree of scenes. Each scene may contain zero or more 3D shapes, with scene being a special case of shape. The root scene defines the world coordinate system. Each 3D shape may define a local coordinate system relative to its parent 3D scene.

N0942:52

COR2

-

〚Change,in the last list item〛

• rotatez (<rotate-angle> ), which specifies a rotation by <rotate-angle> degrees along the zy-axis.

N0942:5

COR1

-

〚Change,in the first paragraph〛

The <dr3d:extrude> element represents a three-dimensional extruded object based on athe given polygon. The 3D geometry is formed by extruding the polygon perpendicular to the plane of the polygon by a depth (see dr3d:depth, 15.22.6), thus creating a front face, a back face and side faces. The side faces are formed by connecting all corresponding single edges of the front and back plane. When no depth is given, the polygon forms a shape without depth. The closing of the front face depends on dr3d:close-front (15.22.9). The closing of the back face depends on dr3d:close-back (15.22.10). The size of the back face can be relative to the size of the front face when dr3d:back-scale (15.22.5) is used. The side faces defined by the extrusion of the shape are always closed.

N1078:32

COR2

-

〚Change,in the first paragraph〛

The <dr3d:rotate> element represents a three-dimensional rotation shape based on athe given polygon. The 3D geometry is defined by rotating the XY-Plane with the polygon around the Y-Axis of the local coordinate system. This rotation is linearly interpolated in the given number of steps (see dr3d:horizontal-segments) around the given angle (see dr3d:end-angle). The side faces are formed by connecting all corresponding single edges of neighboring pairs of rotated polygons. By default, the rotation uses a full rotation (360 degrees, see dr3d:end-angle 15.22.8). In that case the 3D geometry is implicitly closed and no front face or back face is created (unless they are of different sizes). If the rotation is different, a front face is created using the first, unrotated polygon and a back face is created using the last rotated polygon. The closing of a front face also depends on dr3d:close-front (15.22.9) and back face on dr3d:close-back (15.22.10). The size of the back face can be different than the size of the front face when dr3d:back-scale (15.22.5) is used.

N1078:32

COR2

-

〚Change,at the end of the first paragraph〛

〚 … 〛that provide a simple way to modify the the geometry.

N0942:6

COR1

-

〚Addition, after the only paragraph〛

The draw:extrusion-first-light-harsh attribute specifies if the primary light is harsh.

When the attribute value is true, the light is harsh. The light is an undiffused point source. When the attribute value is false, the light is not harsh. The means by which the light is softened is implementation-dependent.

N1078:32

COR2

-

〚Addition, after the only paragraph〛

The draw:extrusion-second-light-harsh attribute specifies if the secondary light is harsh.

When the attribute value is true, the light is harsh. The light is an undiffused point source. When the attribute value is false, the light is not harsh. The means by which the light is softened is implementation-dependent.

N1078:32

COR2

-

〚Change in the first paragraph〛

〚 … 〛other instructions together with its parameter are describingtheir parameters determine the geometry of a shape which can be filled and/or stroked.〚 … 〛

3815

WG6

N

9.5.3/
Enhanced Path

〚Change in the list of parameter enhancements “?” and “$”〛

• If “$” is preceding aprecedes an integer value, the value is a indexingindexes a draw:modifiers attribute. The corresponding modifier value is used as the parameter value then.

3816

WG6

N

〚Change, at the beginning of the Description Entry for Command A〛

(x1,y1) and (x2,y2) is definingdefine the bounding box of an ellipse. 〚 … 〛

3803

WG6

N

〚Change, at the end of the Description Entry for Command A〛

〚 … 〛the end-angle that is specified by point (x4, y4).

N0942:7

COR1

-

〚Change, in the Description Entry for Command B〛

The same as the “A” command, except that an implied moveto to the starting point is done.

N0942:8

COR1

-

〚Change, in the Description Entry for Command V〛

The same as the “A” command, except that an implied moveto to the starting point is done and the arc is drawn clockwise.

N0942:9

COR1

-

〚Change, in the first paragraph〛

The draw:text-areas attribute specifies an optional list of text areas. The text areas are is used to position and align the text. If no text area is omittedspecified, the area of the shape itself is used. If a second text area is availablespecified, it is used for vertical text.

3818

WG6

N

〚Change, in the second list item〛

• If “$” is preceding aprecedes an integer value, the value is a indexingindexes a draw:modifiers attribute. The corresponding modifier value is used as the parameter value then.

N0942:10
3816

COR1
WG6

-
N

〚Change, in the last paragraph〛

An example of the 〚 … 〛

N0942:11

COR1

-

〚Change, in the first paragraph〛

The draw:glue-points attribute specifies a list of object defined glue points. In contradiction toUnlike the user defined glue points which are defined by the <draw:glue-point> sub-element, the position of an object defined glue point can make use ofbe defined using equations and modifiers.

3819

WG6

N

〚Change, in the second list item〛

• If “$” is preceding aprecedes an integer value, the value is a indexingindexes a draw:modifiers attribute. The corresponding modifier value is used as the parameter value then.

N0942:12
3816

COR1
WG6

-
N

〚Change, in the last paragraph〛

An example of the draw:glue-points attribute that defines two glue points, including modifier and equation usage, would be: draw:glue-points=”"0 ?Formula1 100 $1"”

N0942:13
3804

COR1
WG6

-
N

〚Change, in the last list item〛

• rectangle: the middle of each side of the shape bound rectangle specifies an object specific glue point

N0942:14

COR1

-

〚Change, in the last sentence〛

The position in the list is the same as the to be referenced glue-point 〚 … 〛

N0942:15

COR1

-

〚Change, in the last sentence〛

Due to the fact that modifier values may be changed 〚 … 〛

N0942:16

COR1

-

〚Change, in the first paragraph〛

〚 … 〛A formula can make use of other formulas or modifier values by function and or modifier reference.

N0942:17

COR1

-

〚Change, in the table heading row〛

Iidentifier

N0942:18

COR1

-

〚Change, in the Description entry for Identifier “top”〛

The top position of the svg:viewBox attribute has to be used.

N0942:19

COR1

-

〚Change, in the Description entry for Identifier “right”〛

The right position of the svg:viewBox attribute has to be used.

N0942:20

COR1

-

〚Change, in the Description entry for Identifier “bottom”〛

The bottom position of the svg:viewBox attribute has to be used.

N0942:21

COR1

-

〚Change, in the last paragraph〛

An example for the draw:formula attribute 〚 … 〛

N0942:22

COR1

-

〚Change, in the second list item〛

• If “$” is preceding aprecedes an integer value, the value is a indexingindexes a draw:modifiers attribute. The corresponding modifier value is used as the parameter value then.

N0942:23
3816

COR1
WG6

-
N

〚Change, in the tenth list item〛

• lines: the shape is faded in orour out by drawing
  〚 … 〛

N0942:24

COR1

-

〚Change, at the end of the first paragraph〛

〚 … 〛animate a single shape and or a shape's paragraphs.

N0942:25

COR1

-

〚Change, in the first sentence〛

For presentation documents, theThe anim:command 〚 … 〛

N0942:26

COR1

-

〚Change, in the eighth list item〛

• execute: another application is launched when this event is triggered. 〚 … 〛

N0942:27

COR1

-

〚Change, in the first sentence〛

This section describes text fields that are specific to the text of drawing shapes that are contained in presentations.

N0942:28

COR1

-

〚Change, in the first sentence〛

The presentation:source attribute specifies whether the current date/time or the fixed content of the the field declaration is displayed.

N0942:29

COR1

-

〚Change, in the only paragraph〛

〚 … 〛This element can contain fixed text or it can contain a <table:cell-address> element pointing to the text that should be displayed as the titlehave a table:cell-range attribute referencing the cell to be taken as the source of the text, over-riding any fixed text.〚 … 〛

3369

TC

N

〚In the Value of script:event-name Attribute column of the table, correct the entry for “form:startrealod”, adjusting the alphabetical index entry accordingly〛

form:startrealodform:startreload

3805

WG6

Y

〚Change, at the end of the first paragraph〛

(See section 6.7.1 for more information on value and value type attributes.)

N0942:82

COR1

-

〚At the end of the last list item where the referenced section number is missing or an error is indicated, insert a cross reference by number to section 9.9 Presentation Events〛

〚 … 〛Presentation events are described in section 9.9.

N0942:83

COR1

-

〚 In the Value of script:event-name Attribute column of the table, correct the entry for ”on-mouseout”, adjusting the alphabetical index entry accordingly〛

on-mouseoutdom:mouseout

3806

WG6

Y

〚Change, at the end of the first paragraph〛

〚 … 〛They have a text:style-name attribute that references these styles.

2716

WG6

Y

〚Add period at the end of the second paragraph〛

〚 … 〛created in the corresponding cells.

3807

WG6

Y

〚In schema fragment lines 11519-11523 the <optional> element should include the <attribute> element, not the reverse.〛

11519 <optional>

11520 <attribute name="text:paragraph-style-name">

<optional>

11521 <ref name="styleNameRef"/>

</optional>

11522 </attribute>

11523 </optional>

3808

WG6

Y

〚Change, at the end of the first paragraph〛

〚 … 〛The countrylanguage attribute can be used with all data style elements.

N0942:84

COR1

-

〚In the table, change the “UNICODE Character Name” entry for UNICODE Character Code U+2794〛

HEAVY WIDE-HEADED RIGHTWARDS ARROW

3809

WG6

Y

〚Change, in the last line of the only paragraph〛

See §9.2 of [CSS3Text] for details.

N0942:38

COR1

-

〚Change, in the next to last sentence of the only paragraph〛

See §9.3 of [CSS3Text] for details.

N0942:38

COR1

-

〚Change the first sentence of the second paragraph〛

The value of these propertyies is either an absolute length or a percentage as described in §78.8.4 of [XSL].

3691 N0942:30

WG6

-

〚Change, in the last line of the only paragraph〛

See §9.2 of [CSS3Text] for details.

N0942:38

COR1

-

〚Change, in the last line of the only paragraph〛

See §9.3 of [CSS3Text] for details.

N0942:38

COR1

-

〚Change, in the last line of the only paragraph〛

See §9.5 of [CSS3Text] for details.

N0942:38

COR1

-

〚Change, in the last line of the only paragraph〛

See §9.5 of [CSS3Text] for details.

N0942:38

COR1

-

〚Change the entire text〛

Use the style:text-combine property to combine characters so that they are displayed within two lines.

The value of this attribute can be none, letters or lines.

If the value is lines, all characters with this attribute value that immediately follow each other are displayed within two lines of approximately the same length. There can be a line break between any two characters to meet this constraint.

If the value of the attribute is letters, up to 5 characters are combined within two lines. Any additional character is displayed as normal text.

The style:text-combine attribute specifies whether to combine characters so that they are displayed within two lines.

The defined values for the style:text-combine attribute are:

• letters: Display text in Kumimoji. Up to five (5) characters are combined within two lines and are displayed with a reduced size in a single wide-cell character. Additional characters are displayed as normal text.

• lines: Displays text in Warichu. All characters with the style:text-combine attribute that immediately follow each other are displayed within two lines of approximately the same length. A line break may occur between any two characters to meet this constraint.

• none: characters should not be combined.

N1309:7

COR2

-

〚Change in the first paragraph〛

〚 … 〛If the attributes areis contained in a common style, the attributes' values may be also percentages.〚 … 〛

3810

WG6

-

〚Change in the referencing of [XSL]〛

See §7.14.99.14 of [XSL] for details.

N0942:31
N0942:34

COR1

-

〚Change in the title of the section〛

15.5.38 Snap To Layout Grid

N0942:67

COR1

-

〚Change in the first sentence〛

The style:snap-to-layout-grid attribute

3811

WG6

N

〚Change the second paragraph〛

The style:row-height property specifies a fixed row height, while the style:min-row-height property specifies a fixedminimum height.

N0942:97

COR1

-

〚Change in the only paragraph〛

〚 … 〛properties of the border lines of the cellpage. 〚 … 〛

N0942:98

COR1

-

〚Change in the first referencing of [XSL]〛

See §7.15.13 of [XSL] for details.

N0942:32
N0942:35

COR1