OASIS AMQP Version 1.0
Part 0 : Overview

Committee Specification Draft 01 /
Public Review Draft 01

21 February 2012

Specification URIs

This version:

http://docs.oasis-open.org/amqp/core/v1.0/csprd01/amqp-core-overview-v1.0-csprd01.xml (Authoritative)



Previous version:


Latest version:

http://docs.oasis-open.org/amqp/core/v1.0/amqp-core-overview-v1.0.xml (Authoritative)



Technical Committee:

OASIS AMQP Technical Committee


Ram Jeyaraman (Ram.Jeyaraman@microsoft.com), Microsoft

Angus Telfer (angus.telfer@inetco.com), INETCO Systems


Robert Godfrey (robert.godfrey@jpmorgan.com), JPMorgan Chase & Co.

David Ingham (David.Ingham@microsoft.com), Microsoft

Rafael Schloming (rafaels@redhat.com), Red Hat

Additional artifacts:

This specification consists of the following documents:

·        Part 0: Overview (this document) - Overview of the AMQP specification

·        Part 1: Types - AMQP type system and encoding

·        Part 2: Transport - AMQP transport layer

·        Part 3: Messaging - AMQP Messaging Layer

·        Part 4: Transactions - AMQP Transactions Layer

·        Part 5: Security - AMQP Security Layers

·        XML Document Type Definition (DTD)

Related work:

This specification replaces or supersedes:

·        http://www.amqp.org/specification/1.0/amqp-org-download


The Advanced Message Queuing Protocol (AMQP) is an open internet protocol for business messaging. It defines a binary wire-level protocol that allows for the reliable exchange of business messages between two parties. AMQP has a layered architecture and the specification is organized as a set of parts that reflects that architecture. Part 1 defines the AMQP type system and encoding. Part 2 defines the AMQP transport layer, an efficient, binary, peer-to-peer protocol for transporting messages between two processes over a network. Part 3 defines the AMQP message format, with a concrete encoding. Part 4 defines how interactions can be grouped within atomic transactions. Part 5 defines the AMQP security layers.


This document was last revised or approved by the OASIS AMQP Technical Committee on the above date. The level of approval is also listed above. Check the “Latest version” location noted above for possible later revisions of this document.

Technical Committee members should send comments on this specification to the Technical Committee’s email list. Others should send comments to the Technical Committee by using the "Send A Comment" button on the Technical Committee's web page at http://www.oasis-open.org/committees/amqp/.

For information on whether any patents have been disclosed that may be essential to implementing this specification, and any offers of patent licensing terms, please refer to the Intellectual Property Rights section of the Technical Committee web page (http://www.oasis-open.org/committees/amqp/ipr.php).

Citation format:

When referencing this specification the following citation format should be used:


OASIS AMQP Version 1.0 Part 0 : Overview. 21 February 2012. Committee Specification Draft 01 / Public Review Draft 01. http://docs.oasis-open.org/amqp/core/v1.0/csprd01/amqp-core-overview-v1.0-csprd01.html.


Copyright OASIS Open 2012. All Rights Reserved.

All capitalized terms in the following text have the meanings assigned to them in the OASIS Intellectual Property Rights Policy (the "OASIS IPR Policy"). The full Policy may be found at the OASIS website.

This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published, and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this section are included on all such copies and derivative works. However, this document itself may not be modified in any way, including by removing the copyright notice or references to OASIS, except as needed for the purpose of developing any document or deliverable produced by an OASIS Technical Committee (in which case the rules applicable to copyrights, as set forth in the OASIS IPR Policy, must be followed) or as required to translate it into languages other than English.

The limited permissions granted above are perpetual and will not be revoked by OASIS or its successors or assigns.


OASIS requests that any OASIS Party or any other party that believes it has patent claims that would necessarily be infringed by implementations of this OASIS Committee Specification or OASIS Standard, to notify OASIS TC Administrator and provide an indication of its willingness to grant patent licenses to such patent claims in a manner consistent with the IPR Mode of the OASIS Technical Committee that produced this specification.

OASIS invites any party to contact the OASIS TC Administrator if it is aware of a claim of ownership of any patent claims that would necessarily be infringed by implementations of this specification by a patent holder that is not willing to provide a license to such patent claims in a manner consistent with the IPR Mode of the OASIS Technical Committee that produced this specification. OASIS may include such claims on its website, but disclaims any obligation to do so.

OASIS takes no position regarding the validity or scope of any intellectual property or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; neither does it represent that it has made any effort to identify any such rights. Information on OASIS' procedures with respect to rights in any document or deliverable produced by an OASIS Technical Committee can be found on the OASIS website. Copies of claims of rights made available for publication and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this OASIS Committee Specification or OASIS Standard, can be obtained from the OASIS TC Administrator. OASIS makes no representation that any information or list of intellectual property rights will at any time be complete, or that any claims in such list are, in fact, Essential Claims.

The name "OASIS" is a trademark of OASIS, the owner and developer of this specification, and should be used only to refer to the organization and its official outputs. OASIS welcomes reference to, and implementation and use of, specifications, while reserving the right to enforce its marks against misleading uses. Please see http://www.oasis-open.org/who/trademark.php for above guidance.

Table of Contents

0.1 Introduction
      0.1.1 Terminology
      0.1.2 Normative References
      0.1.3 Non-normative References
0.2 Conformance
0.3 Acknowledgements
0.4 Revision History

0.1 Introduction

The Advanced Message Queuing Protocol is an open internet protocol for business messaging.

AMQP is comprised of several layers. The lowest level defines an efficient, binary, peer-to-peer protocol for transporting messages between two processes over a network. Above this, the messaging layer defines an abstract message format, with concrete standard encoding. Every compliant AMQP process must be able to send and receive messages in this standard encoding.

0.1.1 Terminology

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this specification are to be interpreted as described in IETF RFC 2119 [RFC2119].

The XML notation used by the specification is formally defined by the AMQP DTD included in the specification.

0.1.2 Normative References

American National Standards Institute, Inc., American National Standard for Information Systems, Coded Character Sets - 7-Bit American National Standard Code for Information Interchange (7-Bit ASCII), ANSI X3.4-1986, March 26, 1986.

A. Phillips, Ed., M. Davis, Ed., Tags for Identifying Languages. IETF BCP: 47, September 2009.

IANA (Internet Assigned Numbers Authority), Hypertext Transfer Protocol (HTTP) Parameters.

IANA (Internet Assigned Numbers Authority), Private Enterprise Numbers.

IANA (Internet Assigned Numbers Authority), Language Subtag Registry.

Standard for Floating-Point Arithmetic. IEEE 754-2008, August 2008.

The Single UNIX Specification, Version 4. IEEE Std 1003.1-2008, December 2008.

N. Freed, N. Borenstein, Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types. IETF RFC 2046, November 1996.

R. Elz, R. Bush, Serial Number Arithmetic. IETF RFC 1982, August 1996.

S. Bradner, Key words for use in RFCs to Indicate Requirement Levels. IETF RFC 2119, March 1997.

D. Crocker, Ed., P. Overell, Augmented BNF for Syntax Specifications: ABNF. IETF RFC 2234, November 1997.

R. Fielding, J. Gettys, J. Mogul, H. Frystyk, L. Masinter, P. Leach, T. Berners-Lee, Hypertext Transfer Protocol -- HTTP/1.1. IETF RFC 2616, June 1999.

P. Leach, M. Mealling, R. Salz, A Universally Unique IDentifier (UUID) URN Namespace. IETF RFC 4122, July 2005.

S. Blake-Wilson, M. Nystrom, D. Hopwood, J. Mikkelsen, T. Wright, Transport Layer Security (TLS) Extensions. IETF RFC 4366, April 2006.

A. Melnikov, Ed., K. Zeilenga, Ed., Simple Authentication and Security Layer (SASL). IETF RFC 4422, June 2006.

T. Dierks, E. Rescorla., The Transport Layer Security (TLS) Protocol Version 1.2. IETF RFC 5246, August 2008.

A. Phillips, Ed., M. Davis, Ed., Tags for Identifying Languages. IETF RFC 5646, September 2009.

The Unicode Consortium. The Unicode Standard, Version 6.0.0, (Mountain View, CA: The Unicode Consortium, 2011. ISBN 978-1-936213-01-6)

0.1.3 Non Normative References

AMQP Capabilities Registry: Connection Capabilities

AMQP Capabilities Registry: Connection Properties

AMQP Capabilities Registry: Delivery Annotations

AMQP Capabilities Registry: Distribution Modes

AMQP Capabilities Registry: Filters

AMQP Capabilities Registry: Footer

AMQP Capabilities Registry: Link Capabilities

AMQP Capabilities Registry: Link Properties

AMQP Capabilities Registry: Link State Properties

AMQP Capabilities Registry: Message Annotations

AMQP Capabilities Registry: Node Properties

AMQP Capabilities Registry: Session Capabilities

AMQP Capabilities Registry: Session Properties

AMQP Capabilities Registry: Source Capabilities

AMQP Capabilities Registry: Target Capabilities

0.2 Conformance

A conformant implementation MUST perform protocol negotiation, and then parse, process, and produce frames in accordance with the format and semantics defined in parts 1 through 5 of this specification.

0.3 Acknowledgements

The following individuals have contributed significantly towards the creation of this specification and are gratefully acknowledged:

The following individuals were members of the OASIS AMQP Technical Committee during the creation of this specification and their contributions are gratefully acknowledged:

0.4 Revision History

WD01AMQP-1 : Make the definition of flow.echo more explicit
AMQP-2 : Make it explicit that flow.properties is only for a link
AMQP-3 : specification/overview.xml has a contributor's name in all caps
AMQP-4 : specification/overview.xml is slightly inconsistent in use of company legal entity names and abbreviations thereof
WD02AMQP-7 : Typo in SaslInit.hostname description
AMQP-8 : Slight contradiction in description of hostname in SaslInit and TLS SNI
AMQP-9 : Could we add a repository for node-properties?
AMQP-10 : Could we have a repository for additional supported-dist-modes?
AMQP-11 : Message Properties.content-type MIME types need adjustment to fit new section types
AMQP-12 : Labelling of headers and section numbers as per the AMQP WG document...
AMQP-13 : Typo: Transactions in 4.4.1 transactional Posting "Settles" - > "Settle"
AMQP-14 : PDF Document should use Sans-Serif font to be consistent with OASIS Standards
AMQP-15 : Move copyright statement to second line of footer to be in line with OASIS style
AMQP-16 : References to INETCO should be "INETCO Systems Limited"
AMQP-17 : Typo in AMQP Open.hostname description
AMQP-18 : Add figure titles to the HTML presentation
AMQP-19 : Fix generated (sub-)section titles in the PDF where they contain a dash ("-")
AMQP-20 : PDF Presentation: use correct "open" and "close" double quotes
AMQP-21 : Change presentation of cross-references to show only section number, not title
AMQP-22 : Transport: Incoporate feedback from Steve Huston's review
AMQP-23 : Abstract/Introduction: Incoporate feedback from Steve Huston's review
AMQP-24 : Update XML transformation to render "n byte" as "n-byte"
AMQP-25 : Types: Incoporate feedback from Steve Huston's review
AMQP-26 : Transport: Incoporate feedback from Steve Huston's review (2)
AMQP-27 : add missing diagram titles
AMQP-28 : Confused use of the terms two's-complement" and "signed"
AMQP-30 : Clarify version negotiation
AMQP-31 : Figure numbering incorrect in the HTML presentation
AMQP-32 : Clarify open behavior
AMQP-33 : Tighten conformance language for 2.4.5
AMQP-34 : Add description of HDR_EXCH state in 2.4.6
AMQP-35 : Clarifications to 2.6.12
AMQP-40 : Incorrect title for IEEE1003 reference
AMQP-45 : Transactions: Incorporate feedback from Steve Huston's review
AMQP-46 : Security: Incorporate feedback from Steve Huston's review
AMQP-48 : Remove capitalization of certain terms within the specification
AMQP-49 : Description of "dynamic" field refers to non-existent concepts of "session name" and "client-id"
WD03AMQP-29 : Add introductory description of the spec's XML schema
AMQP-36 : Clarify that delivery-count is not a count (in 2.6.7 and 2.7.4)
AMQP-37 : Improve description of snd-settle-mode and rcv-settle-mode
AMQP-38 : Provide more information as to how an incomplete settled map is resolved
AMQP-39 : Clarify settlement on multi-transfer deliveries
AMQP-41 : Rephrase language around keys in annotations
AMQP-42 : Clarify use of error field in rejected outcome
AMQP-44 : Specification should refer to AMQP.org document as related (superseded) work
AMQP-47 : Messaging: Incorporate feedback from Steve Huston's review
WD04AMQP-43 : Review comments from Ram Jeyaraman
WD05AMQP-50 : Section 3.2.16 is rendered differently in the html and pdf versions of the draft.
AMQP-51 : Add missing acknowledgments
AMQP-52 : Appendix A DTD is missing in the PDF document.
AMQP-53 : Add Revision History
AMQP-54 : Fix capitalization differences between HTML and PDF on front page
AMQP-55 : Change labeling of DTD on front page
AMQP-57 : Unresolved cross references due to removal of redundant subsection
WD06AMQP-58 : Fix capitalization of headings on front page material
AMQP-59 : Add missing acknowledgments
AMQP-60 : Correct PDF ToC entry for DTD
WD07AMQP-61 : Fixes to front-matter presentation

Part 1: Types >>