Template: OASIS:ResourcePoolItem

This section specifies the template ResourcePoolItem.

The specification comprises a SysML Block that represents the template and an associated Parametric Diagram that defines the templates and PLCS PSM objects instantiated by the ResourcePoolItem template.

The specification comprises the following sections:

NOTE    An explanation of a template and its specification is provided in the Template overview

The ResourcePoolItem template describes how to represent an item (a ManagedResource) that is a member of a ResourcePool

No templates have been explicitly defined as being related to the ResourcePoolItem template.

NOTE    The ResourcePoolItem template may make reference to other templates as part of the Parametric Diagram. These are not listed here.

Figure 1 shows the SysML Block that represents the template. The Block is an abstraction representing a pattern of templates and PLCS PSM objects.

The properties, i.e. the SysML Block Part, Reference and Value properties, of the template's SysML Block are described in the Template Properties section.

The output ports shown on the template's SysML Block are described in the template output ports section.

Figure 1 -  Template block definition diagram for ResourcePoolItem

The following Part, Reference, and Value properties are defined for this template:

References:
itemReference [1] (Block: Ap239Ap233Psm:ResourceItemSelect)
The item reference
pool [1] (Template: OASIS:ResourcePool)
The ResourcePool
Parts:
quantity [1] (Block: Ap239Ap233Psm:ValueWithUnit)
The quantity of the item in the pool
poolItemNumber [1] (Template: OASIS:Identification)
The identification of the item inside the pool
Values:
startEffectivityDate [0..1] (Block: Ap239Ap233Psm:DateTimeString)
The date when the item starts to be valid in the pool
endEffectivityDate [0..1] (Block: Ap239Ap233Psm:DateTimeString)
The date when the item ends to be valid in the pool

The following output ports are defined for this template:

poolItem (Block: Ap239Ap233Psm:ManagedResource)
Enables the Block: Ap239Ap233Psm:ManagedResource instantiated by this template to be referenced when the template is used.

There are no constraints defined for this template.

This section describes the template's Parametric Diagram. The diagram details the pattern of templates and PLCS PSM objects that are required to represent the template ResourcePoolItem.

The public properties, i.e. those visible in the template's SysML block (See Figure 1) are shown on the left of a Parametric Diagram.

NOTE    Restrictions on the reference data to be set on the public properties is defined in the Template Properties section.

The output ports are shown on the right of the Parametric Diagram.

PLCS PSM objects are shaded khaki and template shaded light green in a Parametric Diagram.

Figure 2 -  Parametric diagram for ResourcePoolItem

The following blocks are instantiated by this template and bound to private parts of the template as shown in the Parametric Diagram section:

Private Part Property:colMember [1] (Block: Ap239Ap233Psm:CollectionMembership)
Private Part Property:managedResource [1] (Block: Ap239Ap233Psm:ManagedResource)
Private Part Property:da [0..1] (Template: OASIS:DatedEffectivity)
Private Part Property:classifyDA [0..1] (Template: OASIS:Classifier)
Private Reference Property:classActualEffectivity [0..1] (Block: Ap239Ap233Psm:ExternalOwlClass)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlClass:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: ur1
Specification: (OCL2.0)
ExternalOwlClass::allInstances()->isUnique(class)
Private Reference Property:classResourcePoolItem [1] (Block: Ap239Ap233Psm:ExternalOwlClass)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlClass:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: ur1
Specification: (OCL2.0)
ExternalOwlClass::allInstances()->isUnique(class)
Private Part Property:ClassifyCM [1] (Template: OASIS:Classifier)

Figure 3 shows the instances that have been instantiated in the template. These are used to set the default value of blocks.

Instance diagram
Figure 3 -  Model instance diagram for ResourcePoolItem

The following instances have been created:

There are no constraint blocks defined in this template.

No example data sets have been provided for this DEX.