This OASIS specification is the result of significant new
work by the WSS Technical Committee and supersedes the input submissions, Web
Service Security (WS-Security) Version 1.0 April 5, 2002 and Web Services
Security Addendum Version 1.0 August 18, 2002.
This specification proposes a standard set of SOAP [SOAP11,
SOAP12] extensions that can be used when building secure Web services to
implement message content integrity and confidentiality. This specification
refers to this set of extensions and modules as the “Web Services Security:
SOAP Message Security” or “WSS: SOAP Message Security”.
This specification is flexible and is designed to be used as
the basis for securing Web services within a wide variety of security models
including PKI, Kerberos, and SSL. Specifically, this specification provides
support for multiple security token formats, multiple trust domains, multiple
signature formats, and multiple encryption technologies. The token formats and
semantics for using these are defined in the associated profile documents.
This specification provides three main mechanisms: ability
to send security tokens as part of a message, message integrity, and message
confidentiality. These mechanisms by themselves do not provide a complete
security solution for Web services. Instead, this specification is a building
block that can be used in conjunction with other Web service extensions and
higher-level application-specific protocols to accommodate a wide variety of
security models and security technologies.
These mechanisms can be used independently (e.g., to pass a
security token) or in a tightly coupled manner (e.g., signing and encrypting a
message or part of a message and providing a security token or token path
associated with the keys used for signing and encryption).
The goal of this specification is to enable applications to
conduct secure SOAP message exchanges.
This specification is intended to provide a flexible set of
mechanisms that can be used to construct a range of security protocols; in
other words this specification intentionally does not describe explicit fixed
security protocols.
As with every security protocol, significant efforts must be
applied to ensure that security protocols constructed using this specification
are not vulnerable to any one of a wide range of attacks. The examples in this
specification are meant to illustrate the syntax of these mechanisms and are not
intended as examples of combining these mechanisms in secure ways.
The focus of this specification is to describe a
single-message security language that provides for message security that may
assume an established session, security context and/or policy agreement.
The requirements to support secure message exchange are
listed below.
The Web services security language must support a wide
variety of security models. The following list identifies the key driving
requirements for this specification:
- Multiple security token formats
- Multiple trust domains
- Multiple signature formats
- Multiple encryption
technologies
- End-to-end message content security and not
just transport-level security
The following topics are outside the scope of this document:
- Establishing a security context or
authentication mechanisms.
- Key derivation.
- Advertisement and exchange of security
policy.
- How trust is established or determined.
- Non-repudiation.
This section specifies the notations, namespaces, and
terminology used in this specification.
The keywords "MUST", "MUST NOT",
"REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED",
"MAY", and "OPTIONAL" in this document are to be
interpreted as described in RFC 2119.
When describing abstract data models, this specification
uses the notational convention used by the XML Infoset. Specifically, abstract
property names always appear in square brackets (e.g., [some property]).
When describing concrete XML schemas, this specification
uses a convention where each member of an element’s [children] or [attributes]
property is described using an XPath-like notation (e.g.,
/x:MyHeader/x:SomeProperty/@value1). The use of {any} indicates the presence
of an element wildcard (<xs:any/>). The use of @{any} indicates the
presence of an attribute wildcard (<xs:anyAttribute/>).
Readers are presumed to be familiar with the terms in the Internet Security Glossary [GLOS].
Namespace URIs (of the general form "some-URI")
represents some application-dependent or context-dependent URI as defined in
RFC 2396 [URI].
This specification is backwardly compatible with version
1.0. This means that URIs and schema elements defined in 1.0 remain unchanged
and new schema elements and constants are defined using 1.1 namespaces and
URIs.
The XML namespace URIs that MUST be
used by implementations of this specification are as follows (note that
elements used in this specification are from various namespaces):
http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd
http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd
http://docs.oasis-open.org/wss/oasis-wss-wssecurity-secext-1.1.xsd
This specification is designed to work with the general SOAP
[SOAP11, SOAP12] message structure
and message processing model, and should be applicable to any version of SOAP.
The current SOAP 1.1 namespace URI is used herein to provide detailed examples,
but there is no intention to limit the applicability of this specification to a
single version of SOAP.
The namespaces used in this document are shown in the
following table (note that for brevity, the examples use the prefixes listed
below but do not include the URIs – those listed below are assumed).
The URLs provided for the wsse
and wsu namespaces can be
used to obtain the schema files.
URI fragments defined in this document are relative to the
following base URI unless otherwise stated:
http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0
2.3 Acronyms and Abbreviations
The following (non-normative) table defines acronyms and
abbreviations for this document.
|
Term
|
Definition
|
|
HMAC
|
Keyed-Hashing for Message Authentication
|
|
SHA-1
|
Secure Hash Algorithm 1
|
|
SOAP
|
Simple Object Access Protocol
|
|
URI
|
Uniform Resource Identifier
|
|
XML
|
Extensible Markup Language
|
Defined below are the basic definitions for the security
terminology used in this specification.
Claim
– A claim is a declaration made by an entity (e.g.
name, identity, key, group, privilege, capability, etc).
Claim Confirmation – A claim
confirmation is the process of verifying that a claim applies to an entity.
Confidentiality – Confidentiality is the property that data is not made
available to unauthorized individuals, entities, or processes.
Digest – A digest is a cryptographic checksum of an octet stream.
Digital Signature – A digital
signature is a value computed with a cryptographic algorithm and bound to
data in such a way that intended recipients of the data can use the digital
signature to verify that the data has not been altered and/or has originated
from the signer of the message, providing message integrity and authentication.
The digital signature can be computed and verified with symmetric key
algorithms, where the same key is used for signing and verifying, or with
asymmetric key algorithms, where different keys are used for signing and
verifying (a private and public key pair are used).
End-To-End Message Level Security - End-to-end message level security
is established when a message that traverses multiple applications (one or more
SOAP intermediaries) within and between business entities, e.g. companies, divisions
and business units, is secure over its full route through and between those
business entities. This includes not only messages that are initiated within
the entity but also those messages that originate outside the entity, whether
they are Web Services or the more traditional messages.
Integrity
– Integrity is the property that data has not been
modified.
Message Confidentiality - Message
Confidentiality is a property of the message and encryption is the
mechanism by which this property of the message is provided.
Message Integrity - Message
Integrity is a property of the message and digital signature is a mechanism
by which this property of the message is provided.
Signature - In this document, signature and digital
signature are used interchangeably and have the same meaning.
Security Token – A security token represents a collection (one or more) of
claims.
Signed Security Token – A signed security token is a security token that is asserted
and cryptographically signed by a specific authority (e.g. an X.509 certificate
or a Kerberos ticket).
Trust -
Trust is the characteristic that one entity is willing to rely upon a
second entity to execute a set of actions and/or to make set of assertions
about a set of subjects and/or scopes.
2.5 Note on Examples
The examples which appear in this document are only intended
to illustrate the correct syntax of the features being specified. The examples
are NOT intended to necessarily represent best practice for implementing any
particular security properties.
Specifically, the examples are constrained to contain only
mechanisms defined in this document. The only reason for this is to avoid
requiring the reader to consult other documents merely to understand the
examples. It is NOT intended to suggest that the mechanisms illustrated
represent best practice or are the strongest available to implement the
security properties in question. In particular, mechanisms defined in other
Token Profiles are known to be stronger, more efficient and/or generally
superior to some of the mechanisms shown in the examples in this document.
When securing SOAP messages, various
types of threats should be considered. This includes, but is not limited to:
- the message could be modified or read by
attacker or
- an antagonist could send messages to a
service that, while well-formed, lack appropriate security claims to
warrant processing
- an antagonist could alter a message to the
service which being well formed causes the service to process and respond
to the client for an incorrect request.
To understand these threats this specification defines a
message security model.
This document specifies an abstract message
security model in terms of security tokens
combined with digital signatures to protect and
authenticate SOAP messages.
Security tokens assert claims and
can be used to assert the binding between authentication secrets or keys and
security identities. An authority can vouch for or endorse the claims in a
security token by using its key to sign or encrypt (it is recommended to use a
keyed encryption) the security token thereby enabling the authentication of the
claims in the token. An X.509 [X509] certificate, claiming
the binding between one’s identity and public key, is an example of a signed security token endorsed by the
certificate authority. In the absence of endorsement by a third party, the
recipient of a security token may choose to accept the claims made in the token
based on its trust of the producer of the containing
message.
Signatures are used to verify message origin and integrity.
Signatures are also used by message producers to demonstrate knowledge of the
key, typically from a third party, used to confirm the claims in a security
token and thus to bind their identity (and any other claims occurring in the
security token) to the messages they create.
It should be noted that this security model, by itself, is
subject to multiple security attacks. Refer to the Security Considerations section for
additional details.
Where the specification requires that an element be
"processed" it means that the element type MUST be recognized to the
extent that an appropriate error is returned if the element is not supported.
Protecting the message content from being disclosed
(confidentiality) or modified without detection (integrity) are primary
security concerns. This specification provides a means to protect a message by
encrypting and/or digitally signing a body, a header, or any combination of
them (or parts of them).
Message integrity is provided by
XML Signature
[XMLSIG] in conjunction with security tokens to
ensure that modifications to messages are detected. The integrity
mechanisms are designed to support multiple signatures,
potentially by multiple SOAP actors/roles, and to be
extensible to support additional signature formats.
Message confidentiality
leverages XML
Encryption [XMLENC] in conjunction with security
tokens to keep portions of a SOAP message confidential. The encryption mechanisms are
designed to support additional encryption processes and operations by multiple SOAP actors/roles.
This document defines syntax and semantics of signatures
within a <wsse:Security> element. This
document does not constrain any signature appearing outside of a <wsse:Security> element.
A message recipient SHOULD reject messages containing
invalid signatures, messages missing necessary claims or messages whose claims
have unacceptable values. Such messages are unauthorized (or malformed). This
specification provides a flexible way for the message producer to make a claim about the security properties by associating zero or
more security tokens with the message. An example
of a security claim is the identity of the producer;
the producer can claim that he is Bob, known as an
employee of some company, and therefore he has the right to send the message.
The following example illustrates the use of a custom
security token and associated signature. The token contains base64 encoded
binary data conveying a symmetric key which, we assume, can be properly
authenticated by the recipient. The message producer uses the symmetric key
with an HMAC signing algorithm to sign the message. The message receiver uses
its knowledge of the shared secret to repeat the HMAC key calculation which it
uses to validate the signature and in the process confirm that the message was
authored by the claimed user identity.
(001) <?xml version="1.0"
encoding="utf-8"?>
(002) <S11:Envelope
xmlns:S11="..." xmlns:wsse="..." xmlns:wsu="..."
xmlns:ds="...">
(003) <S11:Header>
(004) <wsse:Security
xmlns:wsse="...">
(005) <wsse:BinarySecurityToken
ValueType=" http://fabrikam123#CustomToken "
EncodingType="...#Base64Binary" wsu:Id=" MyID ">
(006) FHUIORv...
(007) </wsse:BinarySecurityToken>
(008) <ds:Signature>
(009) <ds:SignedInfo>
(010) <ds:CanonicalizationMethod
Algorithm=
"http://www.w3.org/2001/10/xml-exc-c14n#"/>
(011) <ds:SignatureMethod
Algorithm=
"http://www.w3.org/2000/09/xmldsig#hmac-sha1"/>
(012) <ds:Reference
URI="#MsgBody">
(013) <ds:DigestMethod
Algorithm=
"http://www.w3.org/2000/09/xmldsig#sha1"/>
(014) <ds:DigestValue>LyLsF0Pi4wPU...</ds:DigestValue>
(015) </ds:Reference>
(016) </ds:SignedInfo>
(017)
<ds:SignatureValue>DJbchm5gK...</ds:SignatureValue>
(018) <ds:KeyInfo>
(019) <wsse:SecurityTokenReference>
(020) <wsse:Reference
URI="#MyID"/>
(021)
</wsse:SecurityTokenReference>
(022) </ds:KeyInfo>
(023) </ds:Signature>
(024) </wsse:Security>
(025) </S11:Header>
(026) <S11:Body wsu:Id="MsgBody">
(027) <tru:StockSymbol
xmlns:tru="http://fabrikam123.com/payloads">
QQQ
</tru:StockSymbol>
(028) </S11:Body>
(029) </S11:Envelope>
The first two lines start the SOAP envelope.
Line (003) begins the headers that are associated with this SOAP
message.
Line (004) starts the <wsse:Security> header defined in
this specification. This header contains security information for an intended
recipient. This element continues until line (024).
Lines (005) to (007) specify a custom token that is
associated with the message. In this case, it uses an externally defined
custom token format.
Lines (008) to (023) specify a digital signature. This signature
ensures the integrity of the signed elements. The
signature uses the XML Signature specification
identified by the ds namespace declaration in Line (002).
Lines (009) to (016) describe what is being signed and the
type of canonicalization being used.
Line (010) specifies how to canonicalize (normalize) the
data that is being signed. Lines (012) to (015) select the elements that are
signed and how to digest them. Specifically, line (012) indicates that the <S11:Body> element is signed. In this example
only the message body is signed; typically all critical elements of the message
are included in the signature (see the Extended
Example below).
Line (017) specifies the signature value of the
canonicalized form of the data that is being signed as defined in the XML Signature specification.
Lines (018) to (022) provides information, partial or complete, as to where to find
the security token associated with this
signature. Specifically, lines (019) to (021) indicate that the security token can be found at (pulled from) the
specified URL.
Lines (026) to (028) contain the body (payload) of the SOAP
message.
There are many motivations for referencing other message
elements such as signature references or correlating signatures to security
tokens. For this reason, this specification defines the wsu:Id
attribute so that recipients need not understand the full schema of the
message for processing of the security elements. That is, they need only
"know" that the wsu:Id attribute represents a
schema type of ID which is used to reference elements. However, because some
key schemas used by this specification don't allow attribute extensibility
(namely XML Signature and XML Encryption), this specification also allows use
of their local ID attributes in addition to the wsu:Id attribute
and the xml:id attribute [XMLID]. As a consequence, when trying to locate an
element referenced in a signature, the following attributes are considered (in
no particular order):
- Local ID attributes on XML Signature elements
- Local ID attributes on XML Encryption
elements
- Global wsu:Id
attributes (described below) on elements
- Profile specific defined identifiers
- Global xml:id attributes on elements
In addition, when signing a part of an envelope such as the
body, it is RECOMMENDED that an ID reference is used instead of a more general
transformation, especially XPath [XPATH]. This is to simplify
processing.
Tokens and elements that are defined in this specification
and related profiles to use wsu:Id attributes
SHOULD use wsu:Id. Elements to
be signed MAY use xml:id [XMLID]
or wsu:Id, and use of xml:id MAY be specified in profiles.
All receivers MUST be able to identify XML elements carrying a wsu:Id attribute as representing an
attribute of schema type ID and process it accordingly.
All receivers MAY be able to identify XML elements with a xml:id attribute as representing an ID
attribute and process it accordingly. Senders SHOULD use wsu:Id and MAY use xml:id. Note that use of xml:id in conjunction with inclusive
canonicalization may be inappropriate, as noted in [XMLID] and thus this
combination SHOULD be avoided.
There are many situations where elements within SOAP messages need to be referenced. For example, when
signing a SOAP message, selected elements are included in the scope of the
signature. XML Schema Part 2 [XMLSCHEMA] provides
several built-in data types that may be used for identifying and referencing
elements, but their use requires that consumers of the SOAP message either have
or must be able to obtain the schemas where the identity or reference
mechanisms are defined. In some circumstances, for example, intermediaries,
this can be problematic and not desirable.
Consequently a mechanism is required for identifying and
referencing elements, based on the SOAP foundation, which does not rely upon
complete schema knowledge of the context in which an element is used. This
functionality can be integrated into SOAP processors so that elements can be identified
and referred to without dynamic schema discovery and processing.
This section specifies a namespace-qualified global
attribute for identifying an element which can be applied to any element that
either allows arbitrary attributes or specifically allows a particular
attribute.
Alternatively, the xml:id
attribute MAY be used. Applications MUST NOT specify both a wsu:Id and xml:id attribute on a single element. It is an XML
requirement that only one id attribute be specified on a single element.
To simplify the processing for intermediaries and
recipients, a common attribute is defined for identifying an element. This
attribute utilizes the XML Schema ID type and specifies a common attribute for
indicating this information for elements.
The syntax for this attribute is as follows:
<anyElement
wsu:Id="...">...</anyElement>
The following describes the attribute illustrated above:
.../@wsu:Id
This attribute, defined as type xsd:ID,
provides a well-known attribute for specifying the local ID of an element.
Two wsu:Id attributes within
an XML document MUST NOT have the same value. Implementations MAY rely on XML
Schema validation to provide rudimentary enforcement for intra-document
uniqueness. However, applications SHOULD NOT rely on schema validation alone
to enforce uniqueness.
This specification does not specify how this attribute will
be used and it is expected that other specifications MAY add additional
semantics (or restrictions) for their usage of this attribute.
The following example illustrates use of this attribute to
identify an element:
<x:myElement wsu:Id="ID1"
xmlns:x="..."
xmlns:wsu="..."/>
Conformant processors that do support XML Schema MUST treat
this attribute as if it was defined using a global attribute declaration.
Conformant processors that do not support dynamic XML Schema
or DTDs discovery and processing are strongly encouraged to integrate this
attribute definition into their parsers. That is, to treat this attribute
information item as if its PSVI has a [type definition] which {target
namespace} is "http://www.w3.org/2001/XMLSchema"
and which {type} is "ID." Doing so allows the processor to inherently
know how to process the attribute without having to locate and process
the associated schema. Specifically, implementations MAY support the value of
the wsu:Id
as the valid identifier for use as an XPointer
[XPointer] shorthand pointer for interoperability with XML Signature
references.
The <wsse:Security> header
block provides a mechanism for attaching security-related information targeted
at a specific recipient in the form of a SOAP actor/role.
This may be either the ultimate recipient of the message or an intermediary.
Consequently, elements of this type may be present multiple times in a SOAP message. An active intermediary on the message path MAY
add one or more new sub-elements to an existing <wsse:Security>
header block if they are targeted for its SOAP node or it
MAY add one or more new headers for additional targets.
As stated, a message MAY have multiple <wsse:Security>
header blocks if they are targeted for separate recipients. A message MUST NOT
have multiple <wsse:Security>
header blocks targeted (whether explicitly or implicitly) at the same
recipient. However, only one <wsse:Security>
header block MAY omit the S11:actor
or S12:role
attributes. Two <wsse:Security> header blocks
MUST NOT have the same value for S11:actor
or S12:role.
Message security information targeted for different recipients MUST appear in
different <wsse:Security> header blocks. This
is due to potential processing order issues (e.g. due to possible header
re-ordering). The <wsse:Security> header block
without a specified S11:actor or S12:role MAY be processed by
anyone, but MUST NOT be removed prior to the final destination or endpoint.
As elements are added to a <wsse:Security>
header block, they SHOULD be prepended to the existing elements. As such, the <wsse:Security> header block represents the signing
and encryption steps the message producer took to create the message. This prepending
rule ensures that the receiving application can process sub-elements in the
order they appear in the <wsse:Security> header
block, because there will be no forward dependency among the sub-elements.
Note that this specification does not impose any specific order of processing
the sub-elements. The receiving application can use whatever order is
required.
When a sub-element refers to a key carried in another
sub-element (for example, a signature sub-element that refers to a binary
security token sub-element that contains the X.509
certificate used for the signature), the key-bearing element SHOULD be ordered
to precede the key-using
Element:
<S11:Envelope>
<S11:Header>
...
<wsse:Security
S11:actor="..." S11:mustUnderstand="...">
...
</wsse:Security>
...
</S11:Header>
...
</S11:Envelope>
The following describes the attributes and elements listed
in the example above:
/wsse:Security
This is the header block for passing
security-related message information to a recipient.
/wsse:Security/@S11:actor
This attribute allows a specific SOAP 1.1 [SOAP11] actor to be identified. This attribute is
optional; however, no two instances of the header block may omit an actor or
specify the same actor.
/wsse:Security/@S12:role
This attribute allows a specific SOAP 1.2 [SOAP12] role to be identified. This attribute is
optional; however, no two instances of the header block may omit a role or
specify the same role.
/wsse:Security/@S11:mustUnderstand
This SOAP 1.1
[SOAP11] attribute is used to indicate whether a header entry is mandatory or
optional for the recipient to process. The value of the mustUnderstand
attribute is either "1" or "0". The absence of the SOAP
mustUnderstand attribute is semantically equivalent to its presence with the
value "0".
/wsse:Security/@S12:mustUnderstand
This SOAP 1.2
[SPOAP12] attribute is used to indicate whether a header entry is mandatory or
optional for the recipient to process. The value of the mustUnderstand attribute
is either "true", "1" "false" or "0".
The absence of the SOAP mustUnderstand attribute is semantically equivalent to
its presence with the value "false".
/wsse:Security/{any}
This is an extensibility mechanism
to allow different (extensible) types of security information, based on a
schema, to be passed. Unrecognized elements SHOULD cause a fault.
/wsse:Security/@{any}
This is an extensibility mechanism
to allow additional attributes, based on schemas, to be added to the header.
Unrecognized attributes SHOULD cause a fault.
All compliant implementations MUST be able to process a <wsse:Security> element.
All compliant implementations MUST declare which profiles
they support and MUST be able to process a <wsse:Security>
element including any sub-elements which may be defined by that profile. It is
RECOMMENDED that undefined elements within the <wsse:Security> header not be processed.
The next few sections outline elements that are expected to
be used within a <wsse:Security>
header.
When a <wsse:Security> header
includes a mustUnderstand="true"
attribute:
- The receiver MUST generate a SOAP fault if
does not implement the WSS: SOAP Message Security specification
corresponding to the namespace. Implementation means ability to interpret
the schema as well as follow the required processing rules specified in
WSS: SOAP Message Security.
- The receiver MUST generate a fault if unable
to interpret or process security tokens contained in the <wsse:Security>
header block according to the corresponding WSS: SOAP Message Security
token profiles.
- Receivers MAY ignore elements or extensions
within the <wsse:Security>
element, based on local security policy.
This chapter specifies some different types of security
tokens and how they are attached to messages.
This specification defines the <wsse:Security>
header as a mechanism for conveying security information with and about
a SOAP message. This header is, by design, extensible to
support many types of security information.
For security tokens based on XML, the extensibility of the <wsse:Security> header allows for these security
tokens to be directly inserted into the header.
This specification describes the processing rules for using
and processing XML Signature and XML Encryption. These rules MUST be followed when using
any type of security token. Note that if signature or encryption is used in
conjunction with security tokens, they MUST be used in a way that conforms to
the processing rules defined by this specification.
This specification does not dictate if and how claim
confirmation must be done; however, it does define how signatures may be used
and associated with security tokens (by referencing the security tokens from
the signature) as a form of claim confirmation.
The <wsse:UsernameToken>
element is introduced as a way of providing a username. This element is
optionally included in the <wsse:Security>
header.
The following illustrates the syntax of this element:
<wsse:UsernameToken
wsu:Id="...">
<wsse:Username>...</wsse:Username>
</wsse:UsernameToken>
The following describes the attributes and elements listed
in the example above:
/wsse:UsernameToken
This element is used to represent a
claimed identity.
/wsse:UsernameToken/@wsu:Id
A string label for this security
token. The wsu:Id allow for an open attribute model.
/wsse:UsernameToken/wsse:Username
This required element specifies the
claimed identity.
/wsse:UsernameToken/wsse:Username/@{any}
This is an extensibility mechanism
to allow additional attributes, based on schemas, to be added to the <wsse:Username> element.
/wsse:UsernameToken/{any}
This is an extensibility mechanism
to allow different (extensible) types of security information, based on a
schema, to be passed. Unrecognized elements SHOULD cause a fault.
/wsse:UsernameToken/@{any}
This is an extensibility mechanism
to allow additional attributes, based on schemas, to be added to the <wsse:UsernameToken> element. Unrecognized attributes SHOULD cause a fault.
All compliant implementations MUST
be able to process a <wsse:UsernameToken> element.
The following illustrates the use of this:
<S11:Envelope xmlns:S11="..."
xmlns:wsse="...">
<S11:Header>
...
<wsse:Security>
<wsse:UsernameToken>
<wsse:Username>Zoe</wsse:Username>
</wsse:UsernameToken>
</wsse:Security>
...
</S11:Header>
...
</S11:Envelope>
For binary-formatted security tokens, this specification
provides a <wsse:BinarySecurityToken>
element that can be included in the <wsse:Security>
header block.
Binary security tokens (e.g., X.509
certificates and Kerberos [KERBEROS] tickets) or other
non-XML formats require a special encoding format for inclusion. This section describes
a basic framework for using binary security tokens. Subsequent specifications
MUST describe the rules for creating and processing specific binary security
token formats.
The <wsse:BinarySecurityToken> element defines
two attributes that are used to interpret it. The ValueType
attribute indicates what the security token is, for example, a Kerberos ticket.
The EncodingType tells how the security token is
encoded, for example Base64Binary.
The following is an overview
of the syntax:
<wsse:BinarySecurityToken wsu:Id=...
EncodingType=...
ValueType=.../>
The following describes the attributes and elements listed
in the example above:
/wsse:BinarySecurityToken
This element is used to include a
binary-encoded security token.
/wsse:BinarySecurityToken/@wsu:Id
An optional string label for this security token.
/wsse:BinarySecurityToken/@ValueType
The ValueType attribute is used to
indicate the "value space" of the encoded binary data (e.g. an X.509 certificate). The ValueType attribute allows a URI
that defines the value type and space of the encoded binary data. Subsequent
specifications MUST define the ValueType value for the tokens that they define. The usage of ValueType is
RECOMMENDED.
/wsse:BinarySecurityToken/@EncodingType
The EncodingType attribute is used to
indicate, using a URI, the encoding format of the binary data (e.g., base64 encoded). A new attribute is introduced, as there are issues with the
current schema validation tools that make derivations of mixed simple and
complex types difficult within XML Schema. The EncodingType attribute is interpreted to indicate the encoding format of the
element. The following encoding formats are pre-defined:
|
URI
|
Description
|
|
#Base64Binary
(default)
|
XML Schema base 64 encoding
|
/wsse:BinarySecurityToken/@{any}
This is an extensibility mechanism
to allow additional attributes, based on schemas, to be added.
All compliant implementations MUST be able to process a <wsse:BinarySecurityToken> element.
This section presents a framework for using XML-based
security tokens. Profile specifications describe rules and processes for
specific XML-based security token formats.
In certain cases it is desirable that the token included in
the <wsse:Security>
header be encrypted for the recipient processing role. In such a case the <xenc:EncryptedData> element
MAY be used to contain a security token and included in the <wsse:Security>
header. That is this specification defines the usage of <xenc:EncryptedData>
to encrypt security tokens contained in <wsse:Security> header.
It should be noted that token references are not made to the
<xenc:EncryptedData>
element, but instead to the token represented by the clear-text, once the <xenc:EncryptedData>
element has been processed (decrypted). Such references utilize the token
profile for the contained token. i.e., <xenc:EncryptedData>
SHOULD NOT include an XML ID for referencing the contained security token.
All <xenc:EncryptedData> tokens SHOULD either
have an embedded encryption key or should be referenced by a separate
encryption key.
When a <xenc:EncryptedData>
token is processed, it is replaced in the message infoset with its decrypted
form.
This specification also defines multiple mechanisms for
identifying and referencing security tokens using the wsu:Id
attribute and the <wsse:SecurityTokenReference>
element (as well as some additional mechanisms). Please refer to the specific
profile documents for the appropriate reference mechanism. However, specific
extensions MAY be made to the <wsse:SecurityTokenReference>
element.
This
chapter discusses and defines mechanisms for referencing security tokens and
other key bearing elements..
Digital
signature and encryption operations require that a key be specified. For
various reasons, the element containing the key in question may be located
elsewhere in the message or completely outside the message. The <wsse:SecurityTokenReference> element provides
an extensible mechanism for referencing security tokens and other key bearing
elements.
The
<wsse:SecurityTokenReference> element provides
an open content model for referencing key bearing elements because not all of
them support a common reference pattern. Similarly, some have closed schemas
and define their own reference mechanisms. The open content model allows
appropriate reference mechanisms to be used.
If a <wsse:SecurityTokenReference>
is used outside of the security header processing block the meaning of the
response and/or processing rules of the resulting references MUST be specified
by the the specific profile and are out of scope of this specification.
The following illustrates the syntax of this element:
<wsse:SecurityTokenReference
wsu:Id="...", wsse11:TokenType="...",
wsse:Usage="...", wsse:Usage="...">
</wsse:SecurityTokenReference>
The following describes the elements defined above:
/wsse:SecurityTokenReference
This element provides a reference to
a security token.
/wsse:SecurityTokenReference/@wsu:Id
A string label for this security token reference which names the
reference. This attribute does not indicate the ID of what is being
referenced, that SHOULD be done using a fragment URI in a <wsse:Reference> element within the <wsse:SecurityTokenReference>
element.
/wsse:SecurityTokenReference/@wsse11:TokenType
This optional attribute is used to identify, by URI, the
type of the referenced token.
This specification recommends that token specific profiles
define appropriate token type identifying URI values, and that these same
profiles require that these values be specified in the profile defined
reference forms.
When a wsse11:TokenType
attribute is specified in conjunction with a wsse:KeyIdentifier/@ValueType
attribute or a wsse:Reference/@ValueType
attribute that indicates the type of the referenced token,
the security token type identified by the wsse11:TokenType
attribute MUST be consistent with the security token type identified by the wsse:ValueType attribute.
|
URI
|
Description
|
|
http://docs.oasis-open.org/wss/oasis-wss-soap-message-security-1.1#EncryptedKey
|
A token type of an <xenc:EncryptedKey>
|
/wsse:SecurityTokenReference/@wsse:Usage
This optional attribute is used to
type the usage of the <wsse:SecurityTokenReference>. Usages are specified using URIs and multiple usages MAY be
specified using XML list semantics. No usages are defined by this
specification.
/wsse:SecurityTokenReference/{any}
This is an extensibility mechanism
to allow different (extensible) types of security references, based on a
schema, to be passed. Unrecognized elements SHOULD cause a fault.
/wsse:SecurityTokenReference/@{any}
This is an extensibility mechanism
to allow additional attributes, based on schemas, to be added to the header.
Unrecognized attributes SHOULD cause a fault.
All compliant implementations MUST be able to process a <wsse:SecurityTokenReference> element.
This element can also be used as a direct child element of <ds:KeyInfo> to indicate a hint
to retrieve the key information from a security token placed somewhere else.
In particular, it is RECOMMENDED, when using XML
Signature and XML Encryption, that a <wsse:SecurityTokenReference>
element be placed inside a <ds:KeyInfo>
to reference the security token used for the
signature or encryption.
There are several challenges that implementations face when
trying to interoperate. Processing the IDs and references requires the
recipient to understand the schema. This may be an expensive task and
in the general case impossible as there is no way to know the "schema
location" for a specific namespace URI. As well, the primary goal of a reference is to uniquely
identify the desired token. ID references are, by definition, unique by XML.
However, other mechanisms such as "principal name" are not required
to be unique and therefore such references may be not unique.
This specification allows for the use of multiple reference
mechanisms within a single <wsse:SecurityTokenReference>.
When multiple references are present in a given <wsse:SecurityTokenReference>,
they MUST resolve to a single token in common. Specific token profiles SHOULD
define the reference mechanisms to be used.
The following list provides a list of the specific reference
mechanisms defined in WSS: SOAP Message Security in preferred order (i.e., most
specific to least specific):
- Direct
References – This allows references to included tokens using URI
fragments and external tokens using full URIs.
- Key
Identifiers – This allows tokens to be referenced using an opaque
value that represents the token (defined by token type/profile).
- Key Names
– This allows tokens to be referenced using a string that matches an
identity assertion within the security token. This is a subset match and
may result in multiple security tokens that match the specified name.
- Embedded References - This allows
tokens to be embedded (as opposed to a pointer to a token that resides
elsewhere).
7.2 Direct
References
The <wsse:Reference> element
provides an extensible mechanism for directly referencing security tokens using URIs.
The following illustrates the syntax of this element:
<wsse:SecurityTokenReference
wsu:Id="...">
<wsse:Reference URI="..."
ValueType="..."/>
</wsse:SecurityTokenReference>
The following describes the elements defined above:
/wsse:SecurityTokenReference/wsse:Reference
This element is used to identify an
abstract URI location for locating a security token.
/wsse:SecurityTokenReference/wsse:Reference/@URI
This optional attribute specifies an abstract URI for a
security token. If a fragment is specified, then it indicates the local ID of
the security token being referenced. The URI MUST identify a security token.
The URI MUST NOT identify a <wsse:SecurityTokenReference>
element, a <wsse:Embedded>
element, a <wsse:Reference>
element, or a <wsse:KeyIdentifier> element.
/wsse:SecurityTokenReference/wsse:Reference/@ValueType
This optional attribute specifies a URI that is used to
identify the type of token being referenced. This specification does
not define any processing rules around the usage of this attribute, however,
specifications for individual token types MAY define specific processing rules
and semantics around the value of the URI and its interpretation. If this
attribute is not present, the URI MUST be processed as a normal URI.
In this version of the specification the use of this
attribute to identify the type of the referenced security token is deprecated.
Profiles which require or recommend the use of this attribute to identify the
type of the referenced security token SHOULD evolve to require or recommend the
use of the wsse:SecurityTokenReference/@wsse11:TokenType
attribute to identify the type of the referenced token.
/wsse:SecurityTokenReference/wsse:Reference/{any}
This is an extensibility mechanism
to allow different (extensible) types of security references, based on a
schema, to be passed. Unrecognized elements SHOULD cause a fault.
/wsse:SecurityTokenReference/wsse:Reference/@{any}
This is an extensibility mechanism
to allow additional attributes, based on schemas, to be added to the header.
Unrecognized attributes SHOULD cause a fault.
The following illustrates the use of this element:
<wsse:SecurityTokenReference
xmlns:wsse="...">
<wsse:Reference
URI="http://www.fabrikam123.com/tokens/Zoe"/>
</wsse:SecurityTokenReference>
Alternatively, if a direct reference is not used, then it is
RECOMMENDED that a key identifier be used to specify/reference a security token
instead of a <ds:KeyName>.
A <wsse:KeyIdentifier>
is a value that can be used to uniquely identify a security token (e.g. a hash
of the important elements of the security token). The exact value type and
generation algorithm varies by security token type (and sometimes by the data
within the token), Consequently, the values and algorithms are described in the
token-specific profiles rather than this specification.
The <wsse:KeyIdentifier>
element SHALL be placed in the <wsse:SecurityTokenReference>
element to reference a token using an identifier. This element SHOULD be used
for all key identifiers.
The processing model assumes that the key identifier for a
security token is constant. Consequently, processing a key identifier involves
simply looking for a security token whose key identifier matches the specified
constant. The <wsse:KeyIdentifier>
element is only allowed inside a <wsse:SecurityTokenReference>
element
The following is an overview of the syntax:
<wsse:SecurityTokenReference>
<wsse:KeyIdentifier
wsu:Id="..."
ValueType="..."
EncodingType="...">
...
</wsse:KeyIdentifier>
</wsse:SecurityTokenReference>
The following describes the attributes and elements listed
in the example above:
/wsse:SecurityTokenReference/wsse:KeyIdentifier
This element is used to include a
binary-encoded key identifier.
/wsse:SecurityTokenReference/wsse:KeyIdentifier/@wsu:Id
An optional string label for this identifier.
/wsse:SecurityTokenReference/wsse:KeyIdentifier/@ValueType
The optional ValueType
attribute is used to indicate the type of KeyIdentifier
being used. This specification defines one ValueType that can be applied to all
token types. Each specific token profile specifies the KeyIdentifier types that may be used to refer to tokens
of that type. It also specifies the critical semantics of the identifier, such
as whether the KeyIdentifier is
unique to the key or the token. If no value is specified then the key
identifier will be interpreted in an application-specific manner. This URI
fragment is relative to a base URI as ndicated in the table below.
|
URI
|
Description
|
|
http://docs.oasis-open.org/wss/oasis-wss-soap-message-security-1.1#ThumbprintSHA1
|
If the security token type
that the Security Token Reference refers to already contains a representation
for the thumbprint, the value obtained from the token MAY be used. If the
token does not contain a representation of a thumbprint, then the value of
the KeyIdentifier MUST be the
SHA1 of the raw octets which would be encoded within the security token
element were it to be included. A thumbprint reference MUST occur in
combination with a required to be supported (by the applicable profile)
reference form unless a thumbprint reference is among the reference forms
required to be supported by the applicable profile, or the parties to the
communication have agreed to accept thumbprint only references.
|
|
http://docs.oasis-open.org/wss/oasis-wss-soap-message-security-1.1#EncryptedKeySHA1
|
If the security token type
that the Security Token Reference refers to already contains a representation
for the EncryptedKey, the
value obtained from the token MAY be used. If the token does not contain a
representation of a EncryptedKey,
then the value of the KeyIdentifier MUST
be the SHA1 of the raw octets which would be encoded within the security
token element were it to be included.
|
/wsse:SecurityTokenReference/wsse:KeyIdentifier/@EncodingType
The optional EncodingType attribute is used to indicate, using a URI, the encoding format of
the KeyIdentifier (#Base64Binary). This specification defines the EncodingType URI values appearing
in the following table. A token specific profile MAY define additional token
specific EncodingType
URI values. A KeyIdentifier MUST
include an EncodingType
attribute when its ValueType is not
sufficient to identify its encoding type. The base values defined in this
specification are:
|
URI
|
Description
|
|
#Base64Binary
|
XML Schema base 64 encoding
|
/wsse:SecurityTokenReference/wsse:KeyIdentifier/@{any}
This is an extensibility mechanism
to allow additional attributes, based on schemas, to be added.
In some cases a reference may be to an embedded token (as
opposed to a pointer to a token that resides elsewhere). To do this, the <wsse:Embedded> element is
specified within a <wsse:SecurityTokenReference>
element. The <wsse:Embedded>
element is only allowed inside a <wsse:SecurityTokenReference>
element.
The following is an overview
of the syntax:
<wsse:SecurityTokenReference>
<wsse:Embedded
wsu:Id="...">
...
</wsse:Embedded>
</wsse:SecurityTokenReference>
The following describes the attributes and elements listed
in the example above:
/wsse:SecurityTokenReference/wsse:Embedded
This element is used to embed a
token directly within a reference (that is, to create a local or literal
reference).
/wsse:SecurityTokenReference/wsse:Embedded/@wsu:Id
An optional string label for this
element. This allows this embedded token to be referenced by a signature or
encryption.
/wsse:SecurityTokenReference/wsse:Embedded/{any}
This is an extensibility mechanism
to allow any security token, based on schemas, to be embedded. Unrecognized
elements SHOULD cause a fault.
/wsse:SecurityTokenReference/wsse:Embedded/@{any}
This is an extensibility mechanism
to allow additional attributes, based on schemas, to be added. Unrecognized
attributes SHOULD cause a fault.
The following example illustrates embedding a SAML assertion:
<S11:Envelope xmlns:S11="..."
xmlns:wsse="..." xmlns:wsu="...">
<S11:Header>
<wsse:Security>
...
<wsse:SecurityTokenReference>
<wsse:Embedded
wsu:Id="tok1">
<saml:Assertion xmlns:saml="...">
...
</saml:Assertion>
</wsse:Embedded>
</wsse:SecurityTokenReference>
...
<wsse:Security>
</S11:Header>
...
</S11:Envelope>
The <ds:KeyInfo> element (from XML Signature) can be used for carrying the key
information and is allowed for different key types and for future
extensibility. However, in this specification, the use of <wsse:BinarySecurityToken> is the RECOMMENDED
mechanism to carry key material if the key type contains binary data. Please
refer to the specific profile documents for the appropriate way to carry key
material.
The following example illustrates use of this element to
fetch a named key:
<ds:KeyInfo Id="..."
xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<ds:KeyName>CN=Hiroshi Maruyama,
C=JP</ds:KeyName>
</ds:KeyInfo>
It is strongly RECOMMENDED to use <wsse:KeyIdentifier>
elements. However, if key names are used, then it is strongly
RECOMMENDED that <ds:KeyName>
elements conform to the attribute names in section 2.3 of RFC 2253 (this is
recommended by XML Signature for <ds:X509SubjectName>) for interoperability.
Additionally, e-mail addresses, SHOULD conform to RFC 822:
EmailAddress=ckaler@microsoft.com
In certain cases, an <xenc:EncryptedKey>
element MAY be used to carry key material encrypted for the recipient’s key.
This key material is henceforth referred to as EncryptedKey.
The EncryptedKey
MAY be used to perform other cryptographic operations within the same message,
such as signatures. The EncryptedKey
MAY also be used for performing cryptographic operations in subsequent messages
exchanged by the two parties. Two mechanisms are defined for referencing the EncryptedKey.
When referencing the EncryptedKey
within the same message that contains the <xenc:EncryptedKey>
element, the <ds:KeyInfo>
element of the referencing construct MUST contain a <wsse:SecurityTokenReference>.
The <wsse:SecurityTokenReference>
element MUST contain a <wsse:Reference> element.
The URI
attribute value of the <wsse:Reference> element MUST be set to the
value of the ID attribute of the
referenced <xenc:EncryptedKey>
element that contains the EncryptedKey.
When referencing the EncryptedKey
in a message that does not contain the <xenc:EncryptedKey>
element, the <ds:KeyInfo>
element of the referencing construct MUST contain a <wsse:SecurityTokenReference>.
The <wsse:SecurityTokenReference>
element MUST contain a <wsse:KeyIdentifier> element. The EncodingType
attribute SHOULD be set to #Base64Binary. Other encoding
types MAY be specified if agreed on by all parties. The wsse11:TokenType
attribute MUST be set to
http://docs.oasis-open.org/wss/oasis-wss-soap-message-security-1.1#EncryptedKey.The
identifier for a <xenc:EncryptedKey> token is defined as the
SHA1 of the raw (pre-base64 encoding) octets specified in the <xenc:CipherValue> element of
the referenced <xenc:EncryptedKey>
token. This value is encoded as indicated in the <wsse:KeyIdentifier>
reference. The <wsse:ValueType>
attribute of <wsse:KeyIdentifier>
MUST be set to http://docs.oasis-open.org/wss/oasis-wss-soap-message-security-1.1#EncryptedKeySHA1.
Message producers may want to enable message recipients to
determine whether a message was altered in transit and to verify that the
claims in a particular security token apply to
the producer of the message.
Demonstrating knowledge of a confirmation key associated
with a token key-claim confirms the accompanying token claims. Knowledge of a
confirmation key may be demonstrated by using that key to create an XML
Signature, for example. The relying party’s acceptance of the claims may depend
on its confidence in the token. Multiple tokens may contain a key-claim for a
signature and may be referenced from the signature using a <wsse:SecurityTokenReference>.
A key-claim may be an X.509 Certificate token, or a Kerberos service ticket
token to give two examples.
Because of the mutability of some SOAP
headers, producers SHOULD NOT use the Enveloped Signature
Transform defined in XML Signature.
Instead, messages SHOULD explicitly include the elements to be signed. Similarly,
producers SHOULD NOT use the Enveloping Signature defined
in XML Signature [XMLSIG].
This specification allows for multiple signatures and
signature formats to be attached to a message, each referencing different, even
overlapping, parts of the message. This is important for many distributed
applications where messages flow through multiple processing stages. For
example, a producer may submit an order that contains an orderID header.
The producer signs the orderID header and the body of the request (the contents
of the order). When this is received by the order processing sub-system,
it may insert a shippingID into the header. The order sub-system would
then sign, at a minimum, the orderID and the shippingID, and possibly the body
as well. Then when this order is processed and shipped by the shipping
department, a shippedInfo header might be appended. The shipping
department would sign, at a minimum, the shippedInfo and the shippingID and
possibly the body and forward the message to the billing department for
processing. The billing department can verify the signatures and
determine a valid chain of trust for the order, as well as who authorized each
step in the process.
All compliant implementations MUST be able to support the XML Signature standard.
This specification
builds on XML Signature and therefore has the same
algorithm requirements as those specified in the XML
Signature specification.
The following table outlines additional algorithms that are
strongly RECOMMENDED by this specification:
As well, the following table outlines additional algorithms
that MAY be used:
The Exclusive
XML Canonicalization algorithm addresses the pitfalls of general
canonicalization that can occur from leaky namespaces
with pre-existing signatures.
Finally, if a producer wishes to sign a message before
encryption, then following the ordering rules laid out in section 5,
"Security Header", they SHOULD first prepend the signature element to
the <wsse:Security>
header, and then prepend the encryption element, resulting in a <wsse:Security> header that has
the encryption element first, followed by the signature element:
|
<wsse:Security> header
|
|
[encryption element]
[signature element]
.
.
|
Likewise, if a producer wishes to sign a message after
encryption, they SHOULD first prepend the encryption element to the <wsse:Security> header, and
then prepend the signature element. This will result in a <wsse:Security> header that has
the signature element first, followed by the encryption element:
|
<wsse:Security> header
|
|
[signature element]
[encryption element]
.
.
|
The XML Digital Signature WG has defined two
canonicalization algorithms: XML Canonicalization and Exclusive XML
Canonicalization. To prevent confusion, the first is also called Inclusive
Canonicalization. Neither one solves all possible problems that can arise. The
following informal discussion is intended to provide guidance on the choice of
which one to use
in particular circumstances. For a more detailed and
technically precise discussion of these issues see: [XML-C14N]
and [EXCC14N].
There are two problems to be avoided. On the one hand, XML
allows documents to be changed in various ways and still be considered
equivalent. For example, duplicate namespace declarations can be removed or
created. As a result, XML tools make these kinds of changes freely when
processing XML. Therefore, it is vital that these equivalent forms match the
same signature.
On the other hand, if the signature simply covers something
like xx:foo, its meaning may change if xx is redefined. In this case the
signature does not prevent tampering. It might be thought that the problem
could be solved by expanding all the values in line. Unfortunately, there are
mechanisms like XPATH which consider xx="http://example.com/"; to be
different from yy="http://example.com/"; even though both xx and yy
are bound to the same namespace.
The fundamental difference between the Inclusive and
Exclusive Canonicalization is the namespace declarations which are placed in
the output. Inclusive Canonicalization copies all the declarations that are
currently in force, even if they are defined outside of the scope of the
signature. It also copies any xml: attributes that are in force, such as xml:lang
or xml:base.
This guarantees that all the declarations you might make use of will be
unambiguously specified. The problem with this is that if the signed XML is
moved into another XML document which has other declarations, the Inclusive
Canonicalization will copy then and the signature will be invalid. This can
even happen if you simply add an attribute in a different namespace to the
surrounding context.
Exclusive Canonicalization tries to figure out what
namespaces you are actually using and just copies those. Specifically, it
copies the ones that are "visibly used", which means the ones that
are a part of the XML syntax. However, it does not look into attribute values
or element content, so the namespace declarations required to process these are
not copied. For example
if you had an attribute like xx:foo="yy:bar" it
would copy the declaration for xx, but not yy. (This can even happen without
your knowledge because XML processing tools might add xsi:type
if you use a schema subtype.) It also does not copy the xml: attributes that
are declared outside the scope of the signature.
Exclusive Canonicalization allows you to create a list of
the namespaces that must be declared, so that it will pick up the declarations
for the ones that are not visibly used. The only problem is that the software
doing the signing must know what they are. In a typical SOAP software
environment, the security code will typically be unaware of all the namespaces
being used by the application in the message body that it is signing.
Exclusive Canonicalization is useful when you have a signed
XML document that you wish to insert into other XML documents. A good example
is a signed SAML assertion which might be inserted as a XML Token in the
security header of various SOAP messages. The Issuer who signs the assertion
will be aware of the namespaces being used and able to construct the list. The
use of Exclusive Canonicalization will insure the signature verifies correctly
every time.
Inclusive Canonicalization is useful in the typical case of
signing part or all of the SOAP body in accordance with this specification.
This will insure all the declarations fall under the signature, even though the
code is unaware of what namespaces are being used. At the same time, it is less
likely that the signed data (and signature element) will be inserted in some
other XML document. Even if this is desired, it still may not be feasible for
other reasons, for example there may be Id's with the same value defined in both
XML documents.
In other situations it will be necessary to study the
requirements of the application and the detailed operation of the
canonicalization methods to determine which is appropriate.
This section is non-normative.
The <wsse:Security>
header block MAY be used to carry a signature compliant with the XML Signature specification within a SOAP
Envelope for the purpose of signing one or more elements in the SOAP
Envelope. Multiple signature entries MAY be added into a single SOAP
Envelope within one <wsse:Security>
header block. Producers SHOULD sign all important elements of the
message, and careful thought must be given to creating a signing policy that
requires signing of parts of the message that might legitimately be altered in
transit.
SOAP applications MUST satisfy the
following conditions:
- A compliant implementation MUST be capable of
processing the required elements defined in the XML
Signature specification.
- To add a signature to a <wsse:Security>
header block, a <ds:Signature> element conforming to
the XML Signature specification MUST be prepended to the existing content
of the <wsse:Security>
header block, in order to indicate to the receiver the correct order of
operations. All the <ds:Reference>
elements contained in the signature SHOULD refer to a resource within the
enclosing SOAP envelope as described in the XML Signature specification. However, since the SOAP message exchange model allows intermediate
applications to modify the Envelope (add or delete a header block; for
example), XPath filtering does not always result in
the same objects after message delivery. Care should be taken in using XPath filtering so that there is no unintentional
validation failure due to such modifications.
- The problem of modification by intermediaries
(especially active ones) is applicable to more than just XPath
processing. Digital signatures, because of canonicalization and digests, present particularly fragile examples of
such relationships. If overall message processing is to remain robust,
intermediaries must exercise care that the transformation algorithms used
do not affect the validity of a digitally signed component.
- Due to security concerns with namespaces, this
specification strongly RECOMMENDS the use of the "Exclusive XML
Canonicalization" algorithm or another canonicalization algorithm
that provides equivalent or greater protection.
- For processing efficiency it is RECOMMENDED
to have the signature added and then the security token prepended so that
a processor can read and cache the token before it is used.
It is often desirable to sign security tokens that are
included in a message or even external to the message. The XML Signature
specification provides several common ways for referencing information to be
signed such as URIs, IDs, and XPath, but some token formats may not allow
tokens to be referenced using URIs or IDs and XPaths may be undesirable in some
situations.
This specification allows different tokens to have their own
unique reference mechanisms which are specified in their profile as extensions
to the <wsse:SecurityTokenReference>
element. This element provides a uniform referencing mechanism that is
guaranteed to work with all token formats. Consequently, this specification
defines a new reference option for XML Signature: the STR Dereference
Transform.
This transform is specified by the URI #STR-Transform
and when applied to a <wsse:SecurityTokenReference> element it
means that the output is the token referenced by the <wsse:SecurityTokenReference> element not the
element itself.
As an overview the processing model is to echo the input to
the transform except when a <wsse:SecurityTokenReference>
element is encountered. When one is found, the element is not echoed, but
instead, it is used to locate the token(s) matching the criteria and rules
defined by the <wsse:SecurityTokenReference> element
and echo it (them) to the output. Consequently, the output of the
transformation is the resultant sequence representing the input with any <wsse:SecurityTokenReference>
elements replaced by the referenced security token(s) matched.
The following illustrates an example of this transformation
which references a token contained within the message envelope:
...
<wsse:SecurityTokenReference
wsu:Id="Str1">
...
</wsse:SecurityTokenReference>
...
<ds:Signature
xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
<ds:SignedInfo>
...
<ds:Reference
URI="#Str1">
<ds:Transforms>
<ds:Transform
Algorithm="...#STR-Transform">
<wsse:TransformationParameters>
<ds:CanonicalizationMethod
Algorithm="http://www.w3.org/TR/2001/REC-xml-c14n-20010315"
/>
</wsse:TransformationParameters>
</ds:Transform>
</ds:Transforms>
<ds:DigestMethod Algorithm=
"http://www.w3.org/2000/09/xmldsig#sha1"/>
<ds:DigestValue>...</ds:DigestValue>
</ds:Reference>
</ds:SignedInfo>
<ds:SignatureValue></ds:SignatureValue>
</ds:Signature>
...
The following describes the attributes and elements listed
in the example above:
/wsse:TransformationParameters
This element is used to wrap parameters for a
transformation allows elements even from the XML Signature namespace.
/wsse:TransformationParameters/ds:Canonicalization
This specifies the canonicalization algorithm to apply to
the selected data.
/wsse:TransformationParameters/{any}
This is an extensibility mechanism to allow different
(extensible) parameters to be specified in the future. Unrecognized parameters
SHOULD cause a fault.
/wsse:TransformationParameters/@{any}
This is an extensibility mechanism to allow additional attributes,
based on schemas, to be added to the element in the future. Unrecognized
attributes SHOULD cause a fault.
The following is a detailed specification of the
transformation. The algorithm is identified by the URI: #STR-Transform.
Transform Input:
- The input is a node set. If the input is an
octet stream, then it is automatically parsed; cf. XML Digital Signature
[XMLSIG].
Transform Output:
- The output is an octet steam.
Syntax:
- The transform takes a single mandatory
parameter, a <ds:CanonicalizationMethod> element,
which is used to serialize the output node set. Note, however, that the
output may not be strictly in canonical form, per the canonicalization
algorithm; however, the output is canonical, in the sense that it is
unambiguous. However, because of syntax requirements in the XML Signature
definition, this parameter MUST be wrapped in a <wsse:TransformationParameters>
element.
-
Processing Rules:
- Let N be the input node set.
- Let R be the set of all
<wsse:SecurityTokenReference> elements in N.
- For each Ri in R, let Di be the result of
dereferencing Ri.
- If Di cannot be determined, then the
transform MUST signal a failure.
- If Di is an XML security token (e.g., a SAML
assertion or a <wsse:BinarySecurityToken> element),
then let Ri' be Di.Otherwise, Di is a raw
binary security token; i.e., an octet stream. In this case, let Ri'
be a node set consisting of a <wsse:BinarySecurityToken>
element, utilizing the same namespace prefix as the <wsse:SecurityTokenReference>
element Ri, with no EncodingType attribute, a ValueType
attribute identifying the content of the security token, and text content
consisting of the binary-encoded security token, with no white space.
- Finally, employ the canonicalization method
specified as a parameter to the transform to serialize N to produce the
octet stream output of this transform; but, in place of any dereferenced <wsse:SecurityTokenReference>
element Ri and its descendants, process the dereferenced node set Ri'
instead. During this step, canonicalization of the replacement node set
MUST be augmented as follows:
- Note: A namespace declaration xmlns=""
MUST be emitted with every apex element that has no namespace node
declaring a value for the default namespace; cf. XML Decryption
Transform.
Note: Per the processing rules above, any <wsse:SecurityTokenReference>
element is effectively replaced by the referenced <wsse:BinarySecurityToken> element and then the <wsse:BinarySecurityToken> is
canonicalized in that context. Each <wsse:BinarySecurityToken>
needs to be complete in a given context, so any necessary namespace
declarations that are not present on an ancestor element will need to be added
to the <wsse:BinarySecurityToken>
element prior to canonicalization.
Signing a <wsse:SecurityTokenReference>
(STR) element provides authentication and integrity protection of only
the STR and not the referenced security token (ST). If signing the ST is the
intended behavior, the STR Dereference Transform (STRDT) may be used which
replaces the STR with the ST for digest computation, effectively protecting the
ST and not the STR. If protecting both the ST and the STR is desired, you may
sign the STR twice, once using the STRDT and once not using the STRDT.
The following table lists the full URI for each URI
fragment referred to in the specification.
|
URI Fragment
|
Full URI
|
|
#Base64Binary
|
http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary
|
|
#STR-Transform
|
http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#STRTransform
|
The validation of a <ds:Signature> element
inside an <wsse:Security>
header block MUST fail if:
- the syntax of the content of the element does
not conform to this specification, or
- the validation of the signature
contained in the element fails according to the core validation of the XML Signature specification [XMLSIG], or
- the application applying its own validation
policy rejects the message for some reason (e.g., the signature is created by an untrusted key –
verifying the previous two steps only performs cryptographic validation of
the signature).
If the validation of the signature element fails,
applications MAY report the failure to the producer using the fault codes
defined in Section 12 Error Handling.
The signature validation shall additionally adhere to the
rules defines in signature confirmation section below, if the initiator desires
signature confirmation:
In the general model, the initiator uses XML Signature
constructs to represent message parts of the request that were signed. The
manifest of signed SOAP elements is contained in the <ds:Signature>
element which in turn is placed inside the <wsse:Security> header.
The <ds:Signature>
element of the request contains a <ds:SignatureValue>.
This element contains a base64 encoded value representing the actual digital
signature. In certain situations it is desirable that initiator confirms that
the message received was generated in response to a message it initiated in its
unaltered form. This helps prevent certain forms of attack. This specification
introduces a <wsse11:SignatureConfirmation>
element to address this necessity.
Compliant responder implementations that support signature
confirmation, MUST include a <wsse11:SignatureConfirmation>
element inside the <wsse:Security>
header of the associated response message for every <ds:Signature>
element that is a direct child of the <wsse:Security> header
block in the originating message. The responder MUST include the contents of
the <ds:SignatureValue>
element of the request signature as the value of the @Value
attribute of the <wsse11:SignatureConfirmation> element. The <wsse11:SignatureConfirmation>
element MUST be included in the message signature of the associated response
message.
If the associated originating signature is received in
encrypted form then the corresponding <wsse11:SignatureConfirmation>
element SHOULD be encrypted to protect the original signature and keys.
The schema outline for this element is as follows:
<wsse11:SignatureConfirmation wsu:Id="..."
Value="..." />
/wsse11:SignatureConfirmation
This element indicates that the responder
has processed the signature in the request. When this element is not present in
a response the initiator SHOULD interpret that the responder is not compliant
with this functionality.
/wsse11:SignatureConfirmation/@wsu:Id
Identifier
to be used when referencing this element in the <ds:SignedInfo> reference list of the signature of the associated response
message. This attribute MUST be present so that un-ambiguous references can be
made to this <wsse11:SignatureConfirmation> element.
/wsse11:SignatureConfirmation/@Value
This optional attribute contains the
contents of a <ds:SignatureValue> copied from the associated request. If the request was not signed,
then this attribute MUST NOT be present. If this attribute is specified with an
empty value, the initiator SHOULD interpret this as incorrect behavior and
process accordingly. When this attribute is not present, the initiator SHOULD
interpret this to mean that the response is based on a request that was not
signed.
Conformant
responders MUST include at least one <wsse11:SignatureConfirmation>. element in the <wsse:Security>
header in any response(s) associated with requests. That is, the normal
messaging patterns are not altered.
For every response message generated, the responder MUST
include a <wsse11:SignatureConfirmation>
element for every <ds:Signature> element it processed from the
original request message. The Value attribute
MUST be set to the exact value of the <ds:SignatureValue>
element of the corresponding <ds:Signature> element.
If no <ds:Signature>
elements are present in the original request message, the responder MUST
include exactly one <wsse11:SignatureConfirmation> element. The Value attribute of the <wsse11:SignatureConfirmation>
element MUST NOT be present. The responder MUST include all <wsse11:SignatureConfirmation>
elements in the message signature of the response message(s). If the <ds:Signature>
element corresponding to a <wsse11:SignatureConfirmation>
element was encrypted in the original request message, the <wsse11:SignatureConfirmation>
element SHOULD be encrypted for the recipient of the response message(s).
The signature validation shall additionally adhere to the
following processing guidelines, if the initiator desires signature
confirmation:
- If a response message does not contain a <wsse11:SignatureConfirmation>
element inside the <wsse:Security>
header, the initiator SHOULD reject the response message.
- If a response message does contain a <wsse11:SignatureConfirmation>
element inside the <wsse:Security>
header but @Value
attribute is not present on <wsse11:SignatureConfirmation>
element, and the associated request message did include a <ds:Signature>
element, the initiator SHOULD reject the response message.
- If a response message does contain a <wsse11:SignatureConfirmation>
element inside the <wsse:Security> header and the @Value attribute is present on the <wsse11:SignatureConfirmation> element, but the associated request did not
include a <ds:Signature>
element, the initiator SHOULD reject the response message.
- If a response message does contain a <wsse11:SignatureConfirmation>
element inside the <wsse:Security>
header, and the associated request message did include a <ds:Signature>
element and the @Value attribute is present but does not
match the stored signature value of the associated request message, the
initiator SHOULD reject the response message.
- If a response message does not contain a <wsse11:SignatureConfirmation>
element inside the <wsse:Security>
header corresponding to each <ds:Signature>
element or if the @Value attribute present
does not match the stored signature values of the associated request
message, the initiator SHOULD reject the response message.
The following sample message illustrates the use of
integrity and security tokens. For this example, only the message body is
signed.
<?xml version="1.0"
encoding="utf-8"?>
<S11:Envelope xmlns:S11="..."
xmlns:wsse="..." xmlns:wsu="..."
xmlns:ds="...">
<S11:Header>
<wsse:Security>
<wsse:BinarySecurityToken
ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3"
EncodingType="...#Base64Binary"
wsu:Id="X509Token">
MIIEZzCCA9CgAwIBAgIQEmtJZc0rqrKh5i...
</wsse:BinarySecurityToken>
<ds:Signature>
<ds:SignedInfo>
<ds:CanonicalizationMethod
Algorithm=
"http://www.w3.org/2001/10/xml-exc-c14n#"/>
<ds:SignatureMethod
Algorithm=
"http://www.w3.org/2000/09/xmldsig#rsa-sha1"/>
<ds:Reference
URI="#myBody">
<ds:Transforms>
<ds:Transform
Algorithm=
"http://www.w3.org/2001/10/xml-exc-c14n#"/>
</ds:Transforms>
<ds:DigestMethod
Algorithm=
"http://www.w3.org/2000/09/xmldsig#sha1"/>
<ds:DigestValue>EULddytSo1...</ds:DigestValue>
</ds:Reference>
</ds:SignedInfo>
<ds:SignatureValue>
BL8jdfToEb1l/vXcMZNNjPOV...
</ds:SignatureValue>
<ds:KeyInfo>
<wsse:SecurityTokenReference>
<wsse:Reference
URI="#X509Token"/>
</wsse:SecurityTokenReference>
</ds:KeyInfo>
</ds:Signature>
</wsse:Security>
</S11:Header>
<S11:Body
wsu:Id="myBody">
<tru:StockSymbol
xmlns:tru="http://www.fabrikam123.com/payloads">
QQQ
</tru:StockSymbol>
</S11:Body>
</S11:Envelope>
This specification allows encryption of any combination of
body blocks, header blocks, and any of these sub-structures by either a common
symmetric key shared by the producer and the recipient or a symmetric key
carried in the message in an encrypted form.
In order to allow this flexibility, this specification
leverages the XML Encryption standard. This
specification describes how the two elements <xenc:ReferenceList> and <xenc:EncryptedKey>
listed below and defined in XML Encryption can be
used within the <wsse:Security> header
block. When a producer or an active intermediary encrypts portion(s) of a SOAP message using XML Encryption it
MUST prepend a sub-element to the <wsse:Security> header
block. Furthermore, the encrypting party MUST either prepend the sub-element
to an existing <wsse:Security> header
block for the intended recipients or create a new <wsse:Security> header block and insert the
sub-element. The combined process of encrypting portion(s) of a message and
adding one of these sub-elements is called an encryption step hereafter. The
sub-element MUST contain the information necessary for the recipient to
identify the portions of the message that it is able to decrypt.
This specification additionally defines an element <wsse11:EncryptedHeader>
for containing encrypted SOAP header blocks. This specification RECOMMENDS an
additional mechanism that uses this element for encrypting SOAP header blocks
that complies with SOAP processing guidelines while preserving the
confidentiality of attributes on the SOAP header blocks.
All compliant implementations MUST be able to support the XML Encryption standard [XMLENC].
The <xenc:ReferenceList> element from XML Encryption
[XMLENC] MAY be used to create a manifest of encrypted portion(s), which are
expressed as <xenc:EncryptedData> elements within the envelope. An element or element
content to be encrypted by this encryption step MUST be replaced by a
corresponding <xenc:EncryptedData> according to XML Encryption.
All the <xenc:EncryptedData> elements
created by this encryption step SHOULD be listed in <xenc:DataReference>
elements inside one or more <xenc:ReferenceList>
element.
Although in XML Encryption [XMLENC],
<xenc:ReferenceList> was originally
designed to be used within an <xenc:EncryptedKey>
element (which implies that all the referenced <xenc:EncryptedData>
elements are encrypted by the same key), this specification allows that <xenc:EncryptedData> elements referenced by the
same <xenc:ReferenceList> MAY be
encrypted by different keys. Each encryption key can be specified in <ds:KeyInfo> within individual <xenc:EncryptedData>.
A typical situation where the <xenc:ReferenceList>
sub-element is useful is that the producer and the recipient use a shared
secret key. The following illustrates the use of this sub-element:
<S11:Envelope xmlns:S11="..."
xmlns:wsse="..." xmlns:wsu="..." xmlns:ds="..."
xmlns:xenc="...">
<S11:Header>
<wsse:Security>
<xenc:ReferenceList>
<xenc:DataReference
URI="#bodyID"/>
</xenc:ReferenceList>
</wsse:Security>
</S11:Header>
<S11:Body>
<xenc:EncryptedData
Id="bodyID">
<ds:KeyInfo>
<ds:KeyName>CN=Hiroshi
Maruyama, C=JP</ds:KeyName>
</ds:KeyInfo>
<xenc:CipherData>
<xenc:CipherValue>...</xenc:CipherValue>
</xenc:CipherData>
</xenc:EncryptedData>
</S11:Body>
</S11:Envelope>
When the encryption step involves encrypting elements or
element contents within a SOAP envelope with a symmetric
key, which is in turn to be encrypted by the recipient’s key and embedded in
the message, <xenc:EncryptedKey> MAY be
used for carrying such an encrypted key. This sub-element MAY contain a
manifest, that is, an <xenc:ReferenceList>
element, that lists the portions to be decrypted with this key. The manifest
MAY appear outside the <xenc:EncryptedKey>
provided that the corresponding xenc:EncryptedData
elements contain <xenc:KeyInfo>
elements that reference the <xenc:EncryptedKey>
element.. An element or element content to be encrypted by this
encryption step MUST be replaced by a corresponding <xenc:EncryptedData>
according to XML Encryption. All the <xenc:EncryptedData> elements created by this
encryption step SHOULD be listed in the <xenc:ReferenceList>
element inside this sub-element.
This construct is useful when encryption is done by a
randomly generated symmetric key that is in turn encrypted by the recipient’s
public key. The following illustrates the use of this element:
<S11:Envelope xmlns:S11="..."
xmlns:wsse="..." xmlns:wsu="..." xmlns:ds="..."
xmlns:xenc="...">
<S11:Header>
<wsse:Security>
<xenc:EncryptedKey>
...
<ds:KeyInfo>
<wsse:SecurityTokenReference>
<ds:X509IssuerSerial>
<ds:X509IssuerName>
DC=ACMECorp, DC=com
</ds:X509IssuerName>
<ds:X509SerialNumber>12345678</ds:X509SerialNumber>
</ds:X509IssuerSerial>
</wsse:SecurityTokenReference>
</ds:KeyInfo>
...
</xenc:EncryptedKey>
...
</wsse:Security>
</S11:Header>
<S11:Body>
<xenc:EncryptedData
Id="bodyID">
<xenc:CipherData>
<xenc:CipherValue>...</xenc:CipherValue>
</xenc:CipherData>
</xenc:EncryptedData>
</S11:Body>
</S11:Envelope>
While XML Encryption specifies that <xenc:EncryptedKey> elements MAY be specified
in <xenc:EncryptedData> elements, this
specification strongly RECOMMENDS that <xenc:EncryptedKey>
elements be placed in the <wsse:Security>
header.
In order to be compliant with SOAP mustUnderstand processing
guidelines and to prevent disclosure of information contained in attributes on
a SOAP header block, this specification introduces an <wsse11:EncryptedHeader>
element. This element contains exactly one <xenc:EncryptedData>
element. This specification RECOMMENDS the use of <wsse11:EncryptedHeader>
element for encrypting SOAP header blocks.
9.4 Processing
Rules
Encrypted parts or using one of the sub-elements defined
above MUST be in compliance with the XML Encryption
specification. An encrypted SOAP envelope MUST still be a
valid SOAP envelope. The message creator MUST NOT encrypt
the <S11:Header>,
<S12:Header>, <S11:Envelope>,
<S12:Envelope>,or <S11:Body>,
<S12:Body> elements but MAY encrypt child elements of either the <S11:Header>, <S12:Header> and <S11:Body> or <S12:Body> elements.
Multiple steps of encryption MAY be added into a single <wsse:Security>
header block if they are targeted for the same recipient.
When an element or element content inside a SOAP
envelope (e.g. the contents of the <S11:Body> or
<S12:Body> elements) are to be encrypted, it MUST be replaced by
an <xenc:EncryptedData>, according to XML Encryption and it SHOULD be referenced from the <xenc:ReferenceList>
element created by this encryption step. If the target of reference is an EncryptedHeader as defined in section
9.3 above, see processing rules defined in section 9.5.3 Encryption using
EncryptedHeader and section 9.5.4 Decryption of EncryptedHeader below.
9.4.1 Encryption
The general steps (non-normative) for creating an encrypted SOAP message in compliance with this specification are listed
below (note that use of <xenc:ReferenceList>
is RECOMMENDED. Additionally, if the target of encryption is a SOAP header,
processing rules defined in section 9.5.3 SHOULD be used).
- Create a new SOAP
envelope.
- Create a <wsse:Security>
header
- When an <xenc:EncryptedKey>
is used, create a <xenc:EncryptedKey> sub-element of the <wsse:Security>
element. This <xenc:EncryptedKey> sub-element SHOULD
contain an <xenc:ReferenceList>
sub-element, containing a <xenc:DataReference>
to each <xenc:EncryptedData>
element that was encrypted using that key.
- Locate data items to be encrypted, i.e., XML
elements, element contents within the target SOAP
envelope.
- Encrypt the data items as follows: For each
XML element or element content within the target SOAP
envelope, encrypt it according to the processing rules of the XML Encryption specification [XMLENC]. Each
selected original element or element content MUST be removed and replaced
by the resulting <xenc:EncryptedData>
element.
- The optional <ds:KeyInfo>
element in the <xenc:EncryptedData>
element MAY reference another <ds:KeyInfo>
element. Note that if the encryption is based on an attached security
token, then a <wsse:SecurityTokenReference>
element SHOULD be added to the <ds:KeyInfo>
element to facilitate locating it.
- Create an <xenc:DataReference> element referencing the
generated <xenc:EncryptedData>
elements. Add the created <xenc:DataReference>
element to the <xenc:ReferenceList>.
- Copy all non-encrypted data.
On receiving a SOAP envelope containing
encryption header elements, for each encryption header element the following
general steps should be processed (this section is non-normative. Additionally,
if the target of reference is an EncryptedHeader,
processing rules as defined in section 9.5.4 below SHOULD be used):
- Identify any decryption keys that are in the
recipient’s possession, then identifying any message elements that it is
able to decrypt.
- Locate the <xenc:EncryptedData>
items to be decrypted (possibly using the <xenc:ReferenceList>).
- Decrypt them as follows:
- For each element in the target SOAP envelope, decrypt it according to the processing
rules of the XML Encryption specification and
the processing rules listed above.
- If the decryption fails for some reason,
applications MAY report the failure to the producer using the fault code
defined in Section 12 Error Handling of
this specification.
- It is possible for overlapping portions of
the SOAP message to be encrypted in such a way that they are intended to
be decrypted by SOAP nodes acting in different Roles. In this case, the <xenc:ReferenceList>
or <xenc:EncryptedKey>
elements identifying these encryption operations will necessarily appear
in different <wsse:Security>
headers. Since SOAP does not provide any means of specifying the order in
which different Roles will process their respective headers, this order
is not specified by this specification and can only be determined by a
prior agreement.
When it is required that an entire SOAP header block
including the top-level element and its attributes be encrypted, the original
header block SHOULD be replaced with a <wsse11:EncryptedHeader>
element. The <wsse11:EncryptedHeader>
element MUST contain the <xenc:EncryptedData> produced by encrypting the header
block. A wsu:Id attribute MAY be
added to the <wsse11:EncryptedHeader>
element for referencing. If the referencing <wsse:Security>
header block defines a value for the <S12:mustUnderstand>
or <S11:mustUnderstand>
attribute, that attribute and associated value MUST be copied to the <wsse11:EncryptedHeader>
element. If the referencing <wsse:Security>
header block defines a value for the S12:role
or S11:actor attribute, that
attribute and associated value MUST be copied to the <wsse11:EncryptedHeader> element. If the
referencing <wsse:Security>
header block defines a value for the S12:relay
attribute, that attribute and associated value MUST be copied to the <wsse11:EncryptedHeader>
element.
Any header block can be replaced with a corresponding <wsse11:EncryptedHeader> header
block. This includes <wsse:Security>
header blocks. (In this case, obviously if the encryption operation is
specified in the same security header or in a security header targeted at a
node which is reached after the node targeted by the <wsse11:EncryptedHeader> element, the decryption
will not occur.)
In addition, <wsse11:EncryptedHeader>
header blocks can be super-encrypted and replaced by other <wsse11:EncryptedHeader> header
blocks (for wrapping/tunneling scenarios). Any <wsse:Security>
header that encrypts a header block targeted to a particular actor SHOULD be
targeted to that same actor, unless it is a security header.
The
processing model for <wsse11:EncryptedHeader> header blocks is
as follows:
1. Resolve
references to encrypted data specified in the <wsse:Security> header block
targeted at this node. For each reference, perform the following steps.
2. If the referenced
element does not have a qualified name of <wsse11:EncryptedHeader>
then
process as per section 9.4.2 Decryption and stop the processing steps here.
3. Otherwise,
extract the <xenc:EncryptedData> element from the <wsse11:EncryptedHeader> element.
4. Decrypt the
contents of the <xenc:EncryptedData> element as per
section 9.4.2 Decryption and replace the <wsse11:EncryptedHeader> element with the
decrypted contents.
5. Process the
decrypted header block as per SOAP processing guidelines.
Alternatively,
a processor may perform a pre-pass over the encryption references in the <wsse:Security> header:
1. Resolve
references to encrypted data specified in the <wsse:Security> header block
targeted at this node. For each reference, perform the following steps.
2. If a referenced
element has a qualified name of <wsse11:EncryptedHeader> then replace the
<wsse11:EncryptedHeader> element with the
contained <xenc:EncryptedData> element and if
present copy the value of the wsu:Id attribute from the <wsse11:EncryptedHeader> element to the <xenc:EncryptedData> element.
3. Process the <wsse:Security> header block as
normal.
It
should be noted that the results of decrypting a <wsse11:EncryptedHeader> header block
could be another <wsse11:EncryptedHeader> header block.
In addition, the result MAY be targeted at a different role than the role
processing the <wsse11:EncryptedHeader> header block.
If
the S11:mustUnderstand or S12:mustUnderstand attribute is
specified on the <wsse11:EncryptedHeader> header block,
and is true, then the following steps define what it means to
"understand" the <wsse11:EncryptedHeader> header block:
1. The processor
MUST be aware of this element and know how to decrypt and convert into the
original header block. This DOES NOT REQUIRE that the process know that it has
the correct keys or support the indicated algorithms.
2.
The
processor MUST, after decrypting the encrypted header block, process the
decrypted header block according to the SOAP processing guidelines. The
receiver MUST raise a fault if any content required to adequately process the
header block remains encrypted or if the decrypted SOAP header is not
understood and the value of the S12:mustUnderstand or S11:mustUnderstand attribute on the
decrypted header block is true. Note that in order to comply with SOAP
processing rules in this case, the processor must roll back any persistent
effects of processing the security header, such as storing a received token.
It is often important for the recipient to be able to
determine the freshness of security semantics.
In some cases, security semantics may be so stale
that the recipient may decide to ignore it.
This specification does not provide a mechanism for
synchronizing time. The assumption is that time is trusted or additional
mechanisms, not described here, are employed to prevent replay.
This specification defines and illustrates time references
in terms of the xsd:dateTime
type defined in XML Schema. It is RECOMMENDED that all time references use
this type. All references MUST be in UTC time. Implementations MUST NOT
generate time instants that specify leap seconds. If, however, other time types
are used, then the ValueType attribute (described below) MUST be
specified to indicate the data type of the time format. Requestors and
receivers SHOULD NOT rely on other applications supporting time resolution
finer than milliseconds.
The <wsu:Timestamp> element provides a mechanism
for expressing the creation and expiration times of the security semantics in a
message.
All times MUST be in UTC format as specified by the XML Schema type (dateTime). It should be noted that
times support time precision as defined in the XML
Schema specification.
The <wsu:Timestamp>
element is specified as a child of the <wsse:Security> header
and may only be present at most once per header (that is, per SOAP
actor/role).
The ordering within the element is as illustrated below.
The ordering of elements in the <wsu:Timestamp> element
is fixed and MUST be preserved by intermediaries.
The schema outline for the <wsu:Timestamp>
element is as follows:
<wsu:Timestamp wsu:Id="...">
<wsu:Created
ValueType="...">...</wsu:Created>
<wsu:Expires
ValueType="...">...</wsu:Expires>
...
</wsu:Timestamp>
The following describes the
attributes and elements listed in the schema above:
/wsu:Timestamp
This is the element for indicating
security semantics timestamps.
/wsu:Timestamp/wsu:Created
This represents the creation time
of the security semantics. This element is optional, but can only be
specified once in a <wsu:Timestamp> element. Within the SOAP processing model, creation is the
instant that the infoset is serialized for transmission. The creation time of
the message SHOULD NOT differ substantially from its transmission
time. The difference in time should be minimized.
/wsu:Timestamp/wsu:Expires
This element represents the expiration of
the security semantics. This is optional, but can appear at most once in
a <wsu:Timestamp>
element. Upon expiration, the requestor asserts
that its security semantics are no longer valid. It is strongly RECOMMENDED
that recipients (anyone who processes this message) discard (ignore) any
message whose security semantics have passed their expiration. A Fault code (wsu:MessageExpired) is provided if the recipient wants to inform the requestor that
its security semantics were expired. A service MAY issue a Fault
indicating the security semantics have expired.
/wsu:Timestamp/{any}
This is an extensibility mechanism
to allow additional elements to be added to the element. Unrecognized elements
SHOULD cause a fault.
/wsu:Timestamp/@wsu:Id
This optional attribute specifies an
XML Schema ID that can be used to reference this element (the timestamp). This
is used, for example, to reference the timestamp in a XML Signature.
/wsu:Timestamp/@{any}
This is an extensibility mechanism
to allow additional attributes to be added to the element. Unrecognized
attributes SHOULD cause a fault.
The expiration is relative to the requestor's clock.
In order to evaluate the expiration time, recipients need to recognize that the
requestor's clock may not be synchronized to the recipient’s clock. The
recipient, therefore, MUST make an assessment of the level of trust to be
placed in the requestor's clock, since the recipient is called upon to evaluate
whether the expiration time is in the past relative to the requestor's, not the
recipient’s, clock. The recipient may make a judgment of the requestor’s
likely current clock time by means not described in this specification, for
example an out-of-band clock synchronization protocol. The recipient may
also use the creation time and the delays introduced
by intermediate SOAP roles to estimate the degree of clock
skew.
The following example illustrates the use of the <wsu:Timestamp> element and its content.
<S11:Envelope xmlns:S11="..."
xmlns:wsse="..." xmlns:wsu="...">
<S11:Header>
<wsse:Security>
<wsu:Timestamp
wsu:Id="timestamp">
<wsu:Created>2001-09-13T08:42:00Z</wsu:Created>
<wsu:Expires>2001-10-13T09:00:00Z</wsu:Expires>
</wsu:Timestamp>
...
</wsse:Security>
...
</S11:Header>
<S11:Body>
...
</S11:Body>
</S11:Envelope>
The following sample message illustrates the use of security
tokens, signatures, and encryption. For this example, the timestamp and the
message body are signed prior to encryption. The decryption transformation is
not needed as the signing/encryption order is specified within the <wsse:Security> header.
(001) <?xml version="1.0"
encoding="utf-8"?>
(002) <S11:Envelope
xmlns:S11="..." xmlns:wsse="..." xmlns:wsu="..."
xmlns:xenc="..." xmlns:ds="...">
(003) <S11:Header>
(004) <wsse:Security>
(005)
<wsu:Timestamp wsu:Id="T0">
(006) <wsu:Created>
(007) 2001-09-13T08:42:00Z</wsu:Created>
(008) </wsu:Timestamp>
(009)
(010) <wsse:BinarySecurityToken
ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3"
wsu:Id="X509Token"
EncodingType="...#Base64Binary">
(011)
MIIEZzCCA9CgAwIBAgIQEmtJZc0rqrKh5i...
(012)
</wsse:BinarySecurityToken>
(013) <xenc:EncryptedKey>
(014) <xenc:EncryptionMethod
Algorithm=
"http://www.w3.org/2001/04/xmlenc#rsa-1_5"/>
(015) <ds:KeyInfo>
<wsse:SecurityTokenReference>
(016)
<wsse:KeyIdentifier
EncodingType="...#Base64Binary"
ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3">MIGfMa0GCSq...
(017)
</wsse:KeyIdentifier>
</wsse:SecurityTokenReference>
(018) </ds:KeyInfo>
(019) <xenc:CipherData>
(020)
<xenc:CipherValue>d2FpbmdvbGRfE0lm4byV0...
(021)
</xenc:CipherValue>
(022) </xenc:CipherData>
(023) <xenc:ReferenceList>
(024) <xenc:DataReference
URI="#enc1"/>
(025)
</xenc:ReferenceList>
(026) </xenc:EncryptedKey>
(027) <ds:Signature>
(028) <ds:SignedInfo>
(029)
<ds:CanonicalizationMethod
Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
(030) <ds:SignatureMethod
Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/>
(031) <ds:Reference
URI="#T0">
(032) <ds:Transforms>
(033) <ds:Transform
Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
(034) </ds:Transforms>
(035) <ds:DigestMethod
Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
(036)
<ds:DigestValue>LyLsF094hPi4wPU...
(037)
</ds:DigestValue>
(038) </ds:Reference>
(039) <ds:Reference
URI="#body">
(040) <ds:Transforms>
(041) <ds:Transform
Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
(042)
</ds:Transforms>
(043) <ds:DigestMethod
Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
(044)
<ds:DigestValue>LyLsF094hPi4wPU...
(045)
</ds:DigestValue>
(046) </ds:Reference>
(047) </ds:SignedInfo>
(048) <ds:SignatureValue>
(049)
Hp1ZkmFZ/2kQLXDJbchm5gK...
(050) </ds:SignatureValue>
(051) <ds:KeyInfo>
(052)
<wsse:SecurityTokenReference>
(053) <wsse:Reference
URI="#X509Token"/>
(054)
</wsse:SecurityTokenReference>
(055) </ds:KeyInfo>
(056) </ds:Signature>
(057) </wsse:Security>
(058) </S11:Header>
(059) <S11:Body
wsu:Id="body">
(060) <xenc:EncryptedData
Type="http://www.w3.org/2001/04/xmlenc#Element"
wsu:Id="enc1">
(061)
<xenc:EncryptionMethod
Algorithm="http://www.w3.org/2001/04/xmlenc#tripledes-cbc"/>
(062) <xenc:CipherData>
(063)
<xenc:CipherValue>d2FpbmdvbGRfE0lm4byV0...
(064) </xenc:CipherValue>
(065) </xenc:CipherData>
(066) </xenc:EncryptedData>
(067) </S11:Body>
(068) </S11:Envelope>
Let's review some of the key sections of this example:
Lines (003)-(058) contain the SOAP message headers.
Lines (004)-(057) represent the <wsse:Security>
header block. This contains the security-related information for the message.
Lines (005)-(008) specify the timestamp information. In
this case it indicates the creation time of the security semantics.
Lines (010)-(012) specify a security
token that is associated with the message. In this case, it specifies an X.509 certificate that is encoded as Base64. Line (011)
specifies the actual Base64 encoding of the certificate.
Lines (013)-(026) specify the key that is used to encrypt
the body of the message. Since this is a symmetric key, it is passed in an
encrypted form. Line (014) defines the algorithm used to encrypt the key.
Lines (015)-(018) specify the identifier of the key that was used to encrypt
the symmetric key. Lines (019)-(022) specify the actual encrypted form of the
symmetric key. Lines (023)-(025) identify the encryption block in the message
that uses this symmetric key. In this case it is only used to encrypt the body
(Id="enc1").
Lines (027)-(056) specify the digital signature. In this
example, the signature is based on the X.509 certificate. Lines
(028)-(047) indicate what is being signed. Specifically, line (039) references
the message body.
Lines (048)-(050) indicate the actual signature value –
specified in Line (043).
Lines (052)-(054) indicate the key that was used for the
signature. In this case, it is the X.509 certificate
included in the message. Line (053) provides a URI link to the Lines
(010)-(012).
The body of the message is represented by Lines
(059)-(067).
Lines (060)-(066) represent the encrypted metadata and form
of the body using XML Encryption. Line (060)
indicates that the "element value" is being replaced and identifies
this encryption. Line (061) specifies the encryption algorithm – Triple-DES in
this case. Lines (063)-(064) contain the actual cipher text (i.e., the result
of the encryption). Note that we don't include a reference to the key as the
key references this encryption – Line (024).
There are many circumstances where an error
can occur while processing security information. For example:
- Invalid or unsupported type of security
token, signing, or encryption
- Invalid or unauthenticated or
unauthenticatable security token
- Invalid signature
- Decryption failure
- Referenced security token is unavailable
- Unsupported namespace
If a service does not perform its normal operation because
of the contents of the Security header, then that MAY be reported using SOAP's
Fault Mechanism. This specification does not mandate that faults be returned as
this could be used as part of a denial of service or cryptographic attack. We combine
signature and encryption failures to mitigate certain types of attacks.
If a failure is returned to a producer then the failure MUST
be reported using the SOAP
Fault mechanism. The following tables outline the predefined security
fault codes. The "unsupported" classes of errors are as
follows. Note that the reason text provided below is RECOMMENDED, but
alternative text MAY be provided if more descriptive or preferred by the
implementation. The tables below are defined in terms of SOAP 1.1. For SOAP
1.2, the Fault/Code/Value is env:Sender (as defined in SOAP
1.2) and the Fault/Code/Subcode/Value is the faultcode below and the
Fault/Reason/Text is the faultstring below.
|
Error that occurred
(faultstring)
|
faultcode
|
|
An unsupported token was provided
|
wsse:UnsupportedSecurityToken
|
|
An unsupported signature or encryption algorithm was used
|
wsse:UnsupportedAlgorithm
|
The "failure" class of errors are:
|
Error that occurred
(faultstring)
|
faultcode
|
|
An error was discovered processing the <wsse:Security> header.
|
wsse:InvalidSecurity
|
|
An invalid security token was provided
|
wsse:InvalidSecurityToken
|
|
The security token could
not be authenticated or authorized
|
wsse:FailedAuthentication
|
|
The signature or decryption was invalid
|
wsse:FailedCheck
|
|
Referenced security token could not be retrieved
|
wsse:SecurityTokenUnavailable
|
|
The message has expired
|
wsse:MessageExpired
|
13 Security Considerations
As stated in the Goals and Requirements section of this
document, this specification is meant to provide extensible framework and
flexible syntax, with which one could implement various security mechanisms.
This framework and syntax by itself does not provide any guarantee of
security. When implementing and using this framework and syntax, one must
make every effort to ensure that the result is not vulnerable to any one of a
wide range of attacks.
It is not feasible to provide a comprehensive list of
security considerations for such an extensible set of mechanisms. A complete
security analysis MUST be conducted on specific solutions based on this
specification. Below we illustrate some of the security concerns that often
come up with protocols of this type, but we stress that this is not an
exhaustive list of concerns.
- freshness guarantee (e.g., the danger of
replay, delayed messages and the danger of relying on timestamps assuming
secure clock synchronization)
- proper use of digital signature and
encryption (signing/encrypting critical parts of the message, interactions
between signatures and encryption), i.e., signatures on (content of)
encrypted messages leak information when in plain-text)
- protection of security tokens (integrity)
- certificate verification (including
revocation issues)
- the danger of using passwords without outmost
protection (i.e. dictionary attacks against passwords, replay, insecurity
of password derived keys, ...)
- the use of randomness (or strong
pseudo-randomness)
- interaction between the security mechanisms
implementing this standard and other system component
- man-in-the-middle attacks
- PKI attacks (i.e. identity mix-ups)
There are other security concerns that one may need to
consider in security protocols. The list above should not be used as a
"check list" instead of a comprehensive security analysis. The next
section will give a few details on some of the considerations in this list.
Digital signatures alone do not provide message
authentication. One can record a signed message and resend it (a replay
attack).It is strongly RECOMMENDED that messages include digitally signed
elements to allow message recipients to detect replays of the message when the
messages are exchanged via an open network. These can be part of the
message or of the headers defined from other SOAP
extensions. Four typical approaches are: Timestamp, Sequence Number,
Expirations and Message Correlation. Signed timestamps MAY be used to keep
track of messages (possibly by caching the most recent timestamp from a
specific service) and detect replays of previous messages. It is RECOMMENDED
that timestamps be cached for a given period of time, as a guideline, a value
of five minutes can be used as a minimum to detect replays, and that timestamps
older than that given period of time set be rejected in interactive scenarios.
This specification defines the use of XML Signature and XML
Encryption in SOAP headers. As one of the building
blocks for securing SOAP messages, it is intended to be
used in conjunction with other security techniques. Digital signatures need to
be understood in the context of other security mechanisms and possible threats
to an entity.
Implementers should also be aware of all the security
implications resulting from the use of digital signatures in general and XML Signature in particular. When building
trust into an application based on a digital signature there are other
technologies, such as certificate evaluation, that must be incorporated, but
these are outside the scope of this document.
As described in XML Encryption,
the combination of signing and encryption over a common data item may introduce
some cryptographic vulnerability. For example, encrypting digitally signed
data, while leaving the digital signature in the clear, may allow plain text
guessing attacks.
When digital signatures are used for verifying the claims
pertaining to the sending entity, the producer must demonstrate knowledge of
the confirmation key. One way to achieve this is to use a challenge-response
type of protocol. Such a protocol is outside the scope of this document.
To this end, the developers can attach timestamps,
expirations, and sequences to messages.
Implementers should be aware of the possibility of a token
substitution attack. In any situation where a digital signature is verified by
reference to a token provided in the message, which specifies the key, it may
be possible for an unscrupulous producer to later claim that a different token,
containing the same key, but different information was intended.
An example of this would be a user who had multiple X.509
certificates issued relating to the same key pair but with different
attributes, constraints or reliance limits. Note that the signature of the
token by its issuing authority does not prevent this attack. Nor can an
authority effectively prevent a different authority from issuing a token over
the same key if the user can prove possession of the secret.
The most straightforward counter to this attack is to insist
that the token (or its unique identifying data) be included under the signature
of the producer. If the nature of the application is such that the contents of
the token are irrelevant, assuming it has been issued by a trusted authority,
this attack may be ignored. However because application semantics may change
over time, best practice is to prevent this attack.
Requestors should use digital signatures to sign security
tokens that do not include signatures (or other protection mechanisms) to
ensure that they have not been altered in transit. It is strongly
RECOMMENDED that all relevant and immutable message content be signed by the
producer. Receivers SHOULD only consider those portions of the document that
are covered by the producer’s signature as being subject to the security tokens
in the message. Security tokens appearing in <wsse:Security>
header elements SHOULD be signed by their issuing authority so that message
receivers can have confidence that the security tokens have not been forged or
altered since their issuance. It is strongly RECOMMENDED that a message
producer sign any <wsse:SecurityToken> elements that it is
confirming and that are not signed by their issuing authority.
When a requester provides, within the request, a Public Key
to be used to encrypt the response, it is possible that an attacker in the
middle may substitute a different Public Key, thus allowing the attacker to
read the response. The best way to prevent this attack is to bind the
encryption key in some way to the request. One simple way of doing this is to
use the same key pair to sign the request as to encrypt the response. However,
if policy requires the use of distinct key pairs for signing and encryption,
then the Public Key provided in the request should be included under the
signature of the request.
In order to trust wsu:Id
attributes and <wsu:Timestamp> elements,
they SHOULD be signed using the mechanisms outlined in this
specification. This allows readers of the IDs and timestamps information
to be certain that the IDs and timestamps haven’t been forged or altered in any
way. It is strongly RECOMMENDED that IDs and timestamp elements be
signed.
XML Signatures using
Shorthand XPointer References (AKA IDREF) protect against the removal and
modification of XML elements; but do not protect the location of the element
within the XML Document.
Whether or not this is a
security vulnerability depends on whether the location of the signed data
within its surrounding context has any semantic import. This consideration
applies to data carried in the SOAP Body or the Header.
Of particular concern is the
ability to relocate signed data into a SOAP Header block which is unknown to
the receiver and marked mustUnderstand="false". This could have the
effect of causing the receiver to ignore signed data which the sender expected
would either be processed or result in the generation of a MustUnderstand
fault.
A similar exploit would
involve relocating signed data into a SOAP Header block targeted to a S11:actor
or S12:role other than that which the sender intended, and which the receiver
will not process.
While these attacks could
apply to any portion of the message, their effects are most pernicious with
SOAP header elements which may not always be present, but must be processed
whenever they appear.
In the general case of XML
Documents and Signatures, this issue may be resolved by signing the entire XML
Document and/or strict XML Schema specification and enforcement. However,
because elements of the SOAP message, particularly header elements, may be
legitimately modified by SOAP intermediaries, this approach is usually not
appropriate. It is RECOMMENDED that applications signing any part of the SOAP
body sign the entire body.
Alternatives countermeasures
include (but are not limited to):
- References
using XPath transforms with Absolute Path expressions with checks
performed by the receiver that the URI and Absolute Path XPath expression
evaluate to the digested nodeset.
- A Reference
using an XPath transform to include any significant location-dependent
elements and exclude any elements that might legitimately be removed,
added, or altered by intermediaries,
- Using only
References to elements with location-independent semantics,
- Strict policy
specification and enforcement regarding which message parts are to be
signed. For example:
- Requiring
that the entire SOAP Body and all children of SOAP Header be signed,
- Requiring
that SOAP header elements which are marked MustUnderstand="false" and have signed descendants MUST include the MustUnderstand attribute under the signature.
13.2.7 Detecting Duplicate Identifiers
The <wsse:Security>
processing SHOULD check for duplicate values from among the set of ID
attributes that it is aware of. The wsse:Security processing MUST generate a
fault if a duplicate ID value is detected.
This section is non-normative.
Based on interoperability experiences with this and similar
specifications, the following list highlights several common areas where
interoperability issues have been discovered. Care should be taken when
implementing to avoid these issues. It should be noted that some of these may
seem "obvious", but have been problematic during testing.
- Key Identifiers: Make sure you
understand the algorithm and how it is applied to security tokens.
- EncryptedKey: The <xenc:EncryptedKey>
element from XML Encryption requires a Type attribute whose value is one
of a pre-defined list of values. Ensure that a correct value is used.
- Encryption Padding: The XML Encryption
random block cipher padding has caused issues with certain decryption
implementations; be careful to follow the specifications exactly.
- IDs: The specification recognizes
three specific ID elements: the global wsu:Id
attribute and the local ID attributes
on XML Signature and XML Encryption elements (because the latter two do
not allow global attributes). If any other element does not allow global
attributes, it cannot be directly signed using an ID reference. Note that
the global attribute wsu:Id MUST carry the
namespace specification.
- Time Formats: This specification uses
a restricted version of the XML Schema xsd:dateTime element.
Take care to ensure compliance with the specified restrictions.
- Byte Order Marker (BOM): Some
implementations have problems processing the BOM marker. It is suggested
that usage of this be optional.
- SOAP, WSDL, HTTP: Various
interoperability issues have been seen with incorrect SOAP, WSDL, and HTTP
semantics being applied. Care should be taken to carefully adhere to
these specifications and any interoperability guidelines that are
available.
This section is non-normative.
In the context of this specification, we are only concerned
with potential privacy violation by the security elements defined here. Privacy
of the content of the payload message is out of scope.
Producers or sending applications should be aware that
claims, as collected in security tokens, are typically personal information,
and should thus only be sent according to the producer's privacy policies.
Future standards may allow privacy obligations or restrictions to be added to
this data. Unless such standards are used, the producer must ensure by
out-of-band means that the recipient is bound to adhering to all restrictions
associated with the data, and the recipient must similarly ensure by
out-of-band means that it has the necessary consent for its intended processing
of the data.
If claim data are visible to intermediaries, then the
policies must also allow the release to these intermediaries. As most personal
information cannot be released to arbitrary parties, this will typically
require that the actors are referenced in an identifiable way; such
identifiable references are also typically needed to obtain appropriate
encryption keys for the intermediaries.
If intermediaries add claims, they should be guided by their
privacy policies just like the original producers.
Intermediaries may also gain traffic information from a SOAP
message exchange, e.g., who communicates with whom at what time. Producers that
use intermediaries should verify that releasing this traffic information to the
chosen intermediaries conforms to their privacy policies.
This section is non-normative.
[GLOSS] Informational RFC 2828, "Internet Security Glossary," May 2000.
[KERBEROS]
J. Kohl and C. Neuman,
"The Kerberos Network Authentication Service (V5)," RFC 1510,
September 1993, http://www.ietf.org/rfc/rfc1510.txt .
[KEYWORDS] S. Bradner, "Key words for use in RFCs to
Indicate Requirement Levels," RFC 2119,
Harvard University, March 1997.
[SHA-1] FIPS PUB 180-1. Secure Hash Standard. U.S. Department
of Commerce / National Institute of Standards and Technology. http://www.itl.nist.gov/fipspubs/fip180-1.htm
[SOAP11]
W3C Note, "SOAP: Simple Object Access
Protocol 1.1," 08 May 2000.
[SOAP12] W3C Recommendation, "SOAP Version 1.2 Part 1:
Messaging Framework", 23 June 2003.
[SOAPSEC]
W3C Note, "SOAP Security Extensions: Digital
Signature," 06 February 2001.
[URI]
T.
Berners-Lee, R. Fielding, L. Masinter, "Uniform Resource Identifiers
(URI): Generic Syntax," RFC 3986, MIT/LCS, Day Software, Adobe Systems,
January 2005.
[XPATH] W3C Recommendation, "XML Path Language",
16 November 1999
The following are non-normative
references included for background and related material:
[WS-SECURITY] "Web Services
Security Language", IBM, Microsoft,
VeriSign, April 2002.
"WS-Security
Addendum", IBM, Microsoft, VeriSign,
August 2002.
"WS-Security
XML Tokens", IBM, Microsoft, VeriSign,
August 2002.
[XMLC14N] W3C Recommendation, "Canonical XML Version
1.0," 15 March 2001.
[EXCC14N]
W3C
Recommendation, "Exclusive XML Canonicalization
Version 1.0,"
8 July 2002.
[XMLENC]
W3C Working Draft,
"XML Encryption Syntax
and Processing," 04 March 2002.
W3C Recommendation, “Decryption
Transform for XML Signature”, 10 December 2002.
[XML-ns]
W3C Recommendation,
"Namespaces
in XML," 14 January 1999.
[XMLSCHEMA]
W3C Recommendation, "XML Schema Part 1:
Structures,"2 May 2001.
W3C Recommendation, "XML Schema Part 2:
Datatypes," 2 May 2001.
[XMLSIG] D.
Eastlake, J. R., D. Solo, M. Bartel, J. Boyer , B. Fox , E. Simon. XML-Signature
Syntax and Processing, W3C Recommendation, 12 February 2002.
[X509] S. Santesson, et al,"Internet X.509 Public Key
Infrastructure Qualified Certificates Profile," http://www.itu.int/rec/recommendation.asp?type=items&lang=e&parent=T-REC-X.509-200003-I
[WSS-SAML] OASIS Working Draft 06, "Web Services
Security SAML Token Profile", 21 February
2003
[WSS-XrML] OASIS Working Draft 03, "Web Services
Security XrML Token Profile", 30 January
2003
[WSS-X509] OASIS, “Web Services Security X.509 Certificate Token
Profile”, 19 January 2004, http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0.pdf
[WSSKERBEROS] OASIS Working Draft 03, "Web Services
Security Kerberos Profile", 30 January 2003
[WSSUSERNAME] OASIS,”Web Services Security UsernameToken Profile” 19
January 2004, http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0.pdf
[WSS-XCBF] OASIS Working Draft 1.1, "Web Services
Security XCBF Token Profile", 30 March 2003
[XMLID] W3C Recommmendation, “xml:id
Version 1.0”, 9 September 2005.
[XPOINTER] "XML Pointer Language (XPointer) Version 1.0, Candidate
Recommendation",
DeRose, Maler, Daniel, 11 September 2001.
An implementation conforms to this specification if it meets
the requirements in Sections 2, 4, and 5 including conformance to the enabled
capabilities in the two core schemas (secext and utility).
The following individuals have participated in the creation
of this specification and are gratefully acknowledged:
Participants:
Current Contributors:
|
Tom
|
Rutt
|
Fujitsu Limited
|
|
Jacques
|
Durand
|
Fujitsu Limited
|
|
Calvin
|
Powers
|
IBM
|
|
Kelvin
|
Lawrence
|
IBM
|
|
Michael
|
McIntosh
|
Individual
|
|
Thomas
|
Hardjono
|
M.I.T.
|
|
David
|
Turner
|
Microsoft Corporation
|
|
Anthony
|
Nadalin
|
Microsoft Corporation
|
|
Monica
|
Martin
|
Microsoft Corporation
|
|
Marc
|
Goodner
|
Microsoft Corporation
|
|
Peter
|
Davis
|
Neustar
|
|
Hal
|
Lockhart
|
Oracle Corporation
|
|
Rich
|
Levinson
|
Oracle Corporation
|
|
Anil
|
Saldhana
|
Red Hat
|
|
Martin
|
Raepple
|
SAP AG
|
|
Federico
|
Rossini
|
Telecom Italia S.p.a.
|
|
Carlo
|
Milono
|
TIBCO Software Inc.
|
|
Don
|
Adams
|
TIBCO Software Inc.
|
|
Jerry
|
Smith
|
US Department of
Defense (DoD)
|
Previous Contributors:
|
Michael
|
Hu
|
Actional
|
|
Maneesh
|
Sahu
|
Actional
|
|
Duane
|
Nickull
|
Adobe Systems
|
|
Gene
|
Thurston
|
AmberPoint
|
|
Frank
|
Siebenlist
|
Argonne National Laboratory
|
|
Pete
|
Dapkus
|
BEA
|
|
Hal
|
Lockhart
|
BEA Systems
|
|
Denis
|
Pilipchuk
|
BEA Systems
|
|
Corinna
|
Witt
|
BEA Systems
|
|
Steve
|
Anderson
|
BMC Software
|
|
Rich
|
Levinson
|
Computer Associates
|
|
Thomas
|
DeMartini
|
ContentGuard
|
|
Guillermo
|
Lao
|
ContentGuard
|
|
TJ
|
Pannu
|
ContentGuard
|
|
Xin
|
Wang
|
ContentGuard
|
|
Merlin
|
Hughes
|
Cybertrust
|
|
Dale
|
Moberg
|
Cyclone Commerce
|
|
Shawn
|
Sharp
|
Cyclone Commerce
|
|
Rich
|
Salz
|
Datapower
|
|
Ganesh
|
Vaideeswaran
|
Documentum
|
|
Sam
|
Wei
|
EMC
|
|
Tim
|
Moses
|
Entrust
|
|
Carolina
|
Canales-Valenzuela
|
Ericsson
|
|
Dana S.
|
Kaufman
|
Forum Systems
|
|
Toshihiro
|
Nishimura
|
Fujitsu
|
|
Tom
|
Rutt
|
Fujitsu
|
|
Kefeng
|
Chen
|
GeoTrust
|
|
Irving
|
Reid
|
Hewlett-Packard
|
|
Kojiro
|
Nakayama
|
Hitachi
|
|
Yutaka
|
Kudo
|
Hitachi
|
|
Jason
|
Rouault
|
HP
|
|
Paula
|
Austel
|
IBM
|
|
Derek
|
Fu
|
IBM
|
|
Maryann
|
Hondo
|
IBM
|
|
Kelvin
|
Lawrence
|
IBM
|
|
Michael
|
McIntosh
|
IBM
|
|
Anthony
|
Nadalin
|
IBM
|
|
Nataraj
|
Nagaratnam
|
IBM
|
|
Bruce
|
Rich
|
IBM
|
|
Ron
|
Williams
|
IBM
|
|
Bob
|
Blakley
|
IBM
|
|
Joel
|
Farrell
|
IBM
|
|
Satoshi
|
Hada
|
IBM
|
|
Hiroshi
|
Maruyama
|
IBM
|
|
David
|
Melgar
|
IBM
|
|
Kent
|
Tamura
|
IBM
|
|
Wayne
|
Vicknair
|
IBM
|
|
Don
|
Flinn
|
Individual
|
|
Phil
|
Griffin
|
Individual
|
|
Mark
|
Hayes
|
Individual
|
|
John
|
Hughes
|
Individual
|
|
Peter
|
Rostin
|
Individual
|
|
Davanum
|
Srinivas
|
Individual
|
|
Bob
|
Morgan
|
Individual/Internet
|
|
Kate
|
Cherry
|
Lockheed Martin
|
|
Bob
|
Atkinson
|
Microsof
|
|
Paul
|
Cotton
|
Microsoft
|
|
Vijay
|
Gajjala
|
Microsoft
|
|
Martin
|
Gudgin
|
Microsoft
|
|
Chris
|
Kaler
|
Microsoft
|
|
Keith
|
Ballinger
|
Microsoft
|
|
Allen
|
Brown
|
Microsoft
|
|
Giovanni
|
Della-Libera
|
Microsoft
|
|
Alan
|
Geller
|
Microsoft
|
|
Johannes
|
Klein
|
Microsoft
|
|
Scott
|
Konersmann
|
Microsoft
|
|
Chris
|
Kurt
|
Microsoft
|
|
Brian
|
LaMacchia
|
Microsoft
|
|
Paul
|
Leach
|
Microsoft
|
|
John
|
Manferdelli
|
Microsoft
|
|
John
|
Shewchuk
|
Microsoft
|
|
Dan
|
Simon
|
Microsoft
|
|
Hervey
|
Wilson
|
Microsoft
|
|
Jeff
|
Hodges
|
Neustar
|
|
Frederick
|
Hirsch
|
Nokia
|
|
Senthil
|
Sengodan
|
Nokia
|
|
Abbie
|
Barbir
|
Nortel
|
|
Lloyd
|
Burch
|
Novell
|
|
Ed
|
Reed
|
Novell
|
|
Charles
|
Knouse
|
Oblix
|
|
Prateek
|
Mishra
|
Oracle
|
|
Vamsi
|
Motukuru
|
Oracle
|
|
Ramana
|
Turlapi
|
Oracle
|
|
Vipin
|
Samar
|
Oracle
|
|
Jerry
|
Schwarz
|
Oracle
|
|
Eric
|
Gravengaard
|
Reactivity
|
|
Andrew
|
Nash
|
Reactivity
|
|
Stuart
|
King
|
Reed Elsevier
|
|
Ben
|
Hammond
|
RSA Security
|
|
Rob
|
Philpott
|
RSA Security
|
|
Martijn
|
de Boer
|
SAP
|
|
Blake
|
Dournaee
|
Sarvega
|
|
Sundeep
|
Peechu
|
Sarvega
|
|
Coumara
|
Radja
|
Sarvega
|
|
Pete
|
Wenzel
|
SeeBeyond
|
|
Jonathan
|
Tourzan
|
Sony
|
|
Yassir
|
Elley
|
Sun
|
|
Manveen
|
Kaur
|
Sun Microsystems
|
|
Ronald
|
Monzillo
|
Sun Microsystems
|
|
Jan
|
Alexander
|
Systinet
|
|
Michael
|
Nguyen
|
The IDA of Singapore
|
|
Don
|
Adams
|
TIBCO Software Inc.
|
|
Symon
|
Chang
|
TIBCO Software Inc.
|
|
John
|
Weiland
|
US Navy
|
|
Hans
|
Granqvist
|
VeriSign
|
|
Phillip
|
Hallam-Baker
|
VeriSign
|
|
Hemma
|
Prafullchandra
|
VeriSign
|
|
Morten
|
Jorgensen
|
Vordel
|
|
Revision
|
Date
|
Editor
|
Changes Made
|
|
WD01
|
17-January-2011
|
Carlo Milono
|
Corrected/added hyperlinks where missing; added Status
section
|
|
WD02
|
8-February-2011
|
Carlo Milono
|
Added Related Work to reflect v1.1.1 of the specs; changed
References for SOAP Message Security to reflect v1.1.1; Changed WD# to 2;
Added Date; Moved Current Members to Previous and added new Current Members;
saved document under wd02; entered the Revision History
Merged Old Current Contributors with Old Previous, created
a New Current Contributors.
|
|
WD03
|
16-March-2011
|
David Turner
|
Corrected and updated links.
|
|
CSD01
|
2-May-2011
|
TC Admin
|
Generated from WD03
|
|
CSD02-draft
|
16-May-11
|
David Turner
|
Added conformance statement and corrected a few formatting
issues.
|
These specifications define several elements, attributes,
and attribute groups which can be re-used by other specifications. This
appendix provides an overview of these utility components. It should be
noted that the detailed descriptions are provided in the specification and this
appendix will reference these sections as well as calling out other aspects not
documented in the specification.
C.1 Identification Attribute
There are many situations where elements within SOAP messages need to be referenced. For example, when
signing a SOAP message, selected elements are included in the signature. XML Schema Part 2 provides several built-in data types
that may be used for identifying and referencing elements, but their use
requires that consumers of the SOAP message either have or are able to obtain
the schemas where the identity or reference mechanisms are defined. In some
circumstances, for example, intermediaries, this can be problematic and not
desirable.
Consequently a mechanism is required for identifying and
referencing elements, based on the SOAP foundation, which does not rely upon
complete schema knowledge of the context in which an element is used. This
functionality can be integrated into SOAP processors so that elements can be
identified and referred to without dynamic schema discovery and processing.
This specification specifies a namespace-qualified global
attribute for identifying an element which can be applied to any element that
either allows arbitrary attributes or specifically allows this attribute. This
is a general purpose mechanism which can be re-used as needed.
A detailed description can be found in Section
4.0 ID References.
This section is non-normative.
C.2 Timestamp Elements
The specification defines XML elements which may be used to
express timestamp information such as creation and expiration. While defined
in the context of message security, these elements can be re-used wherever
these sorts of time statements need to be made.
The elements in this specification are defined and
illustrated using time references in terms of the dateTime
type defined in XML Schema. It is RECOMMENDED that all time references use
this type for interoperability. It is further RECOMMENDED that all references
be in UTC time for increased interoperability. If, however, other time types
are used, then the ValueType attribute MUST be specified to indicate
the data type of the time format.
The following table provides an overview of these elements:
|
Element
|
Description
|
|
<wsu:Created>
|
This element is used to indicate the creation time
associated with the enclosing context.
|
|
<wsu:Expires>
|
This element is used to indicate the expiration time
associated with the enclosing context.
|
A detailed description can be found in Section 10.
This section is non-normative.
C.3 General Schema Types
The schema for the utility aspects of this specification
also defines some general purpose schema elements. While these elements are
defined in this schema for use with this specification, they are general
purpose definitions that may be used by other specifications as well.
Specifically, the following schema elements are defined and
can be re-used:
|
Schema Element
|
Description
|
|
wsu:commonAtts attribute group
|
This attribute group defines the common attributes
recommended for elements. This includes the wsu:Id
attribute as well as extensibility for other namespace qualified attributes.
|
|
wsu:AttributedDateTime type
|
This type extends the XML Schema dateTime type to include
the common attributes.
|
|
wsu:AttributedURI type
|
This type extends the XML Schema anyURI type to include
the common attributes.
|
This section is non-normative.
This appendix provides a non-normative overview of the usage
and processing models for the <wsse:SecurityTokenReference>
element.
There are several motivations for introducing the <wsse:SecurityTokenReference>
element:
- The XML Signature reference mechanisms are
focused on "key" references rather than general token
references.
- The XML Signature reference mechanisms
utilize a fairly closed schema which limits the extensibility that can be
applied.
- There are additional types of general
reference mechanisms that are needed, but are not covered by XML
Signature.
- There are scenarios where a reference may
occur outside of an XML Signature and the XML Signature schema is not
appropriate or desired.
- The XML Signature references may include
aspects (e.g. transforms) that may not apply to all references.
The following use cases drive the above motivations:
Local Reference – A
security token, that is included in the message in the <wsse:Security> header, is associated with an XML
Signature. The figure below illustrates this:
Remote Reference – A
security token, that is not included in the message but may be available at a
specific URI, is associated with an XML Signature. The figure below
illustrates this:
Key Identifier – A
security token, which is associated with an XML Signature and identified using
a known value that is the result of a well-known function of the security token
(defined by the token format or profile). The figure below illustrates this
where the token is located externally:
Key Name – A security
token is associated with an XML Signature and identified using a known value
that represents a "name" assertion within the security token (defined
by the token format or profile). The figure below illustrates this where the
token is located externally:
Format-Specific References
– A security token is associated with an XML Signature and identified using a
mechanism specific to the token (rather than the general mechanisms described
above). The figure below illustrates this:
Non-Signature References
– A message may contain XML that does not represent an XML signature, but may
reference a security token (which may or may not be included in the message).
The figure below illustrates this:
All conformant implementations must be able to process the <wsse:SecurityTokenReference>
element. However, they are not required to support all of the different types
of references.
The reference may include a wsse11:TokenType
attribute which provides a "hint" for the type of desired token.
If multiple sub-elements are specified, together they
describe the reference for the token.
There are several challenges that implementations face when
trying to interoperate:
ID References – The
underlying XML referencing mechanism using the XML base type of ID provides a
simple straightforward XML element reference. However, because this is an XML
type, it can be bound to any attribute. Consequently in order to
process the IDs and references requires the recipient to understand the
schema. This may be an expensive task and in the general case impossible as
there is no way to know the "schema location" for a specific
namespace URI.
Ambiguity – The
primary goal of a reference is to uniquely identify the desired token. ID
references are, by definition, unique by XML. However, other mechanisms such
as "principal name" are not required to be unique and therefore such
references may be unique.
The XML Signature specification defines a <ds:KeyInfo> element which is
used to provide information about the "key" used in the signature.
For token references within signatures, it is recommended that the <wsse:SecurityTokenReference> be
placed within the <ds:KeyInfo>.
The XML Signature specification also defines mechanisms for referencing keys by
identifier or passing specific keys. As a rule, the specific mechanisms
defined in WSS: SOAP Message Security or its profiles are preferred over the
mechanisms in XML Signature.
The following provides additional details on the specific
reference mechanisms defined in WSS: SOAP Message Security:
Direct References –
The <wsse:Reference>
element is used to provide a URI reference to the security token. If only the
fragment is specified, then it references the security token within the
document whose wsu:Id
matches the fragment. For non-fragment URIs, the reference is to a
[potentially external] security token identified using a URI. There are no
implied semantics around the processing of the URI.
Key Identifiers – The <wsse:KeyIdentifier> element is
used to reference a security token by specifying a known value (identifier) for
the token, which is determined by applying a special function to the
security token (e.g. a hash of key fields). This approach is typically unique
for the specific security token but requires a profile or token-specific
function to be specified. The ValueType
attribute defines the type of key identifier and, consequently, identifies the
type of token referenced. The EncodingType
attribute specifies how the unique value (identifier) is encoded. For example,
a hash value may be encoded using base 64 encoding.
Key Names – The <ds:KeyName> element is used to
reference a security token by specifying a specific value that is used to match
an identity assertion within the security token. This is a subset match and
may result in multiple security tokens that match the specified name. While
XML Signature doesn't imply formatting semantics, WSS: SOAP Message Security
recommends that X.509 names be specified.
It is expected that, where appropriate, profiles define if
and how the reference mechanisms map to the specific token profile.
Specifically, the profile should answer the following questions:
- What types of references can be used?
- How "Key Name" references map (if
at all)?
- How "Key Identifier" references map
(if at all)?
- Are there any additional profile or
format-specific references?
This section is non-normative.
