This is an OASIS Committee Draft listing errata for the OASIS ebXML Registry Services and Protocols Standard produced by the ebXML Registry Technical Committee. The standard was approved by the OASIS membership on 2 May 2005.

Status:

This document was last revised or approved by the ebXML Registry TC on the above date. The level of approval is also listed above. Check the “Latest Version” or “Latest Approved Version” location noted above for possible later revisions of this document.

Technical Committee members should send comments on this specification to the Technical Committee’s email list. Others should send comments to the Technical Committee by using the “Send A Comment” button on the Technical Committee’s web page at http://www.oasis-open.org/committees/regrep/.

For information on whether any patents have been disclosed that may be essential to implementing this specification, and any offers of patent licensing terms, please refer to the Intellectual Property Rights section of the Technical Committee web page (http://www.oasis-open.org/committees/regrep/ipr.php.

Notices

All capitalized terms in the following text have the meanings assigned to them in the OASIS Intellectual Property Rights Policy (the "OASIS IPR Policy"). The full Policy may be found at the OASIS website.

This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published, and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this section are included on all such copies and derivative works. However, this document itself may not be modified in any way, including by removing the copyright notice or references to OASIS, except as needed for the purpose of developing any document or deliverable produced by an OASIS Technical Committee (in which case the rules applicable to copyrights, as set forth in the OASIS IPR Policy, must be followed) or as required to translate it into languages other than English.

The limited permissions granted above are perpetual and will not be revoked by OASIS or its successors or assigns.

This document and the information contained herein is provided on an "AS IS" basis and OASIS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY OWNERSHIP RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

OASIS requests that any OASIS Party or any other party that believes it has patent claims that would necessarily be infringed by implementations of this OASIS Committee Specification or OASIS Standard, to notify OASIS TC Administrator and provide an indication of its willingness to grant patent licenses to such patent claims in a manner consistent with the IPR Mode of the OASIS Technical Committee that produced this specification.

OASIS invites any party to contact the OASIS TC Administrator if it is aware of a claim of ownership of any patent claims that would necessarily be infringed by implementations of this specification by a patent holder that is not willing to provide a license to such patent claims in a manner consistent with the IPR Mode of the OASIS Technical Committee that produced this specification. OASIS may include such claims on its website, but disclaims any obligation to do so.

OASIS takes no position regarding the validity or scope of any intellectual property or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; neither does it represent that it has made any effort to identify any such rights. Information on OASIS' procedures with respect to rights in any document or deliverable produced by an OASIS Technical Committee can be found on the OASIS website. Copies of claims of rights made available for publication and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this OASIS Committee Specification or OASIS Standard, can be obtained from the OASIS TC Administrator. OASIS makes no representation that any information or list of intellectual property rights will at any time be complete, or that any claims in such list are, in fact, Essential Claims.

The name "OASIS" is a trademark of OASIS, the owner and developer of this specification, and should be used only to refer to the organization and its official outputs. OASIS welcomes reference to, and implementation and use of, specifications, while reserving the right to enforce its marks against misleading uses. Please see http://www.oasis-open.org/who/trademark.php for above guidance.

Table of Contents

1 Issues Addressed. 5

1.1 Terminology. 5

1.2 Normative References. 5

2 Missing Figures. 6

2.1 Figure 15: Content Management Service: Inline Invocation Model 6

2.2 Figure 16: Content Management Service: Decoupled Invocation Model 7

2.3 Figure 17: Cataloging Service Configuration. 8

2.4 Figure 23: Federation Metadata Example. 9

3 Typographical/Editorial Errors. 10

3.1 Section 5.1.2: Unique ID Generation. 10

3.2 Section 6.3.2.1: Specifying Query Invocation Parameters. 11

3.3 ebXMLRegistryInterfaces.wsdl file. 12

A. Acknowledgements. 13

B. Revision History. 14

1 Issues Addressed

The following issues related to the ebXML Registry Services and Protocols version 3.0 have been addressed in this document:

Missing figures:

Figure 15: Content Management Service: Inline Invocation Model, page 78

Figure 16: Content Management Service: Decoupled Invocation Model, page 79

Figure 17: Cataloging Service Configuration, page 82

Figure 23: Federation Metadata Example, page 93

Text in 5.1.2 Unique ID Generation is inconsistent with the rim.xsd. The rim.xsd is correct and paragraph is wrong.

The stored query given in Listing 2: “Example of Stored Query Invocation” is incorrect in Section 6.3.2.1, Specifying Query Invocation Parameters. Text in 6.3.2.1 describing the stored query invocation example is incorrect.

The ebXMLRegistryInterfaces.wsdl file has a typographical error in the output message in the operation named “UpdateObjects”.

1.1 Terminology

The key words “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “MAY”, and “OPTIONAL” in this document are to be interpreted as described in [RFC2119].

1.2 Normative References

[RFC2119] S. Bradner, Key words for use in RFCs to Indicate Requirement Levels, http://www.ietf.org/rfc/rfc2119.txt, IETF RFC 2119, March 1997.

2 Missing Figures

2.1 Figure 15: Content Management Service: Inline Invocation Model

Insert Figure 15 on page 78, line 2732:

Figure 15: Content Management Service: Inline Invocation Model

2.2 Figure 16: Content Management Service: Decoupled Invocation Model

Insert Figure 16 on page 79, line 2763:

Figure 16: Content Management Service: Decoupled Invocation Model

2.3 Figure 17: Cataloging Service Configuration

Insert Figure 17 on page 82, line 2870:

Figure 17: Cataloging Service Configuration

2.4 Figure 23: Federation Metadata Example

Insert Figure 23 on page 93, line 3201:

Figure 23: Federation Metadata Example

3 Typographical/Editorial Errors

3.1 Section 5.1.2: Unique ID Generation

Text in 5.1.2 Unique ID Generation is inconsistent with the rim.xsd. The rim.xsd is correct and paragraph is wrong. Text needs to be edited to be consistent with rim.xsd.

Line 1150 original text:

A Submitter MAY optionally supply the id attribute for submitted objects. If the Submitter supplies the id

and it is a valid URN and does not conflict with the id of an existing RegistryObject within the home

registry then the registry MUST honor the Submitter-supplied id value and use it as the value of the id

attribute of the object in the registry. If the id is not a valid URN then the registry MUST return an

InvalidRequestException. If the id conflicts with the id of an existing RegistryObject within the home

registry then the registry MUST return InvalidRequestException for an UpdateObjectsRequest and treat

it as an Update action for a SubmitObjectsRequest.

If the client does not supply an id for a submitted object then the registry MUST generate a universally

unique id. A registry generated id value MUST conform to the format of a URN that specifies a DCE 128

bit UUID as specified in [UUID]:

(e.g. urn:uuid:a2345678-1234-1234-123456789012).

Replace with new text:

A Submitter MUST supply the id attribute for submitted objects. If the id is not specified then the registry MUST return an InvalidRequestException.

If the id and lid match the id and lid of an existing RegistryObject within the home registry, then the registry MUST treat it as an Update action upon the existing RegistryObject.

If the id matches the id of an existing RegistryObject within the home registry but the lid does not match that existing object's lid, then the registry MUST return an InvalidRequestException.

If the lid matches the lid of an existing RegistryObject within the home registry but the id does not match that existing object's id, then the registry MUST create the newly submitted object as a new version of the existing object.

If the Submitter supplies the id and it is a valid URN then the registry MUST honor the Submitter-supplied id value and use it as the value of the id attribute of the object in the registry. If the id is not a valid URN then the registry MUST treat it as a temporary id and replace it, and all references to it within the request, with a registry generated universally unique id. A registry generated universally unique id value MUST conform to the format of a URN that specifies a DCE 128 bit UUID as specified in [UUID]:

(e.g. urn:uuid:a2345678-1234-1234-123456789012)

3.2 Section 6.3.2.1: Specifying Query Invocation Parameters

Text describing the listing example, line 1866, is incorrect. Original text:

· The stored query being identified by the value of the id attribute of the <rim:AdhocQuery> element.

Replace with new text:

· The stored query being identified by the value of the canonical slot with name "urn:oasis:names:tc:ebxml-regrep:rs:AdhocQueryRequest:queryId"

Listing 2 example, lines 1871-1882 incorrect. Original example:

<query:ResponseOption returnComposedObjects="true"

returnType="LeafClassWithRepositoryItem"/>

<rim:AdhocQuery id="${STORED_QUERY_ID}">

<rim:Slot name="$name">

<rim:ValueList>

<rim:Value>%ebXML%</rim:Value>

</rim:ValueList>

</rim:Slot>

</rim:AdhocQuery>

</AdhocQueryRequest>

Listing 2: Example of Stored Query Invocation

Replace with new example:

<rs:RequestSlotList>

<rim:Slot name="urn:oasis:names:tc:ebxml-regrep:rs:AdhocQueryRequest:queryId">

<rim:ValueList>

<rim:Value>urn:freebxml:registry:query:BusinessQuery</rim:Value>

</rim:ValueList>

</rim:Slot>

<rim:Slot name="$name">

<rim:ValueList>

<rim:Value>%ebXML% </rim:Value>

</rim:ValueList>

</rim:Slot>

</rs:RequestSlotList>

<query:ResponseOption returnComposedObjects="true" returnType="LeafClassWithRepositoryItem" />

<rim:AdhocQuery id="temporaryId">

<rim:QueryExpression queryLanguage="urn:oasis:names:tc:ebxml-regrep:QueryLanguage:SQL-92">

</rim:QueryExpression>

</rim:AdhocQuery>

</AdhocQueryRequest>

Listing 2: Example of Stored Query Invocation

3.3 ebXMLRegistryInterfaces.wsdl file

The ebXMLRegistryInterfaces.wsdl file has a typographical error in the output message in the operation named “UpdateObjects”.

Original text:

</operation>

Replace with text:

</operation>

A. Acknowledgements

The following individuals have participated in the creation of this specification and are gratefully acknowledged:

Participants:

Name	Affiliation
Ivan Bedini	France Telecom
Kathryn Breininger	The Boeing Company
Paul Macias	LMI
Carl Mattocks	MetLife
Monica Martin	Sun Microsystems
Farrukh Najmi	Wellfleet Software Corporation
Nikola Stojanovic	GS1 US
Ted Hass	GS1 US

B. Revision History

Revision	Date	Editor	Changes Made
01	18 December 2006	Kathryn Breininger	Added figures, corrected text
02	07 February 2007	Kathryn Breininger	Corrected text, added wsdl correction
03	01 March 2007	Kathryn Breininger	Updated title page, notices page, and footer