Template: OASIS:ViewDefinitionContext

This section specifies the template ViewDefinitionContext.

The specification comprises a SysML Block that represents the template and an associated Parametric Diagram that defines the templates and PLCS PSM objects instantiated by the ViewDefinitionContext template.

The specification comprises the following sections:

NOTE    An explanation of a template and its specification is provided in the Template overview

The ViewDefinitionContext template describes how to represent a ViewDefinitionContext.

No templates have been explicitly defined as being related to the ViewDefinitionContext template.

NOTE    The ViewDefinitionContext template may make reference to other templates as part of the Parametric Diagram. These are not listed here.

Figure 1 shows the SysML Block that represents the template. The Block is an abstraction representing a pattern of templates and PLCS PSM objects.

The properties, i.e. the SysML Block Part, Reference and Value properties, of the template's SysML Block are described in the Template Properties section.

The output ports shown on the template's SysML Block are described in the template output ports section.

Figure 1 -  Template block definition diagram for ViewDefinitionContext

The following Part, Reference, and Value properties are defined for this template:

Parts:
lifeCycleStage [1] (Block: Ap239Ap233Psm:ExternalOwlObject)
The reference data defining the life cycle stage.

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlObject:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: ur1
Specification: (OCL2.0)
ExternalOwlObject::allInstances()->isUnique(individual)
The reference data used in Block: Ap239Ap233Psm:ExternalOwlObject is restricted as follows:
RDL constraint 1:
The reference data for:
ExternalOwlObject.individual
is restricted to individuals that are members of the following class:
applicationDomain [1] (Block: Ap239Ap233Psm:ExternalOwlObject)
The reference data defining the application domain.

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ExternalOwlObject:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: ur1
Specification: (OCL2.0)
ExternalOwlObject::allInstances()->isUnique(individual)
The reference data used in Block: Ap239Ap233Psm:ExternalOwlObject is restricted as follows:
RDL constraint 1:
The reference data for:
ExternalOwlObject.individual
is restricted to individuals that are members of the following class:

The following output ports are defined for this template:

viewDefinitionContext (Block: Ap239Ap233Psm:ViewDefinitionContext)
Enables the Block: Ap239Ap233Psm:ViewDefinitionContext instantiated by this template to be referenced when the template is used.

There are no constraints defined for this template.

This section describes the template's Parametric Diagram. The diagram details the pattern of templates and PLCS PSM objects that are required to represent the template ViewDefinitionContext.

The public properties, i.e. those visible in the template's SysML block (See Figure 1) are shown on the left of a Parametric Diagram.

NOTE    Restrictions on the reference data to be set on the public properties is defined in the Template Properties section.

The output ports are shown on the right of the Parametric Diagram.

PLCS PSM objects are shaded khaki and template shaded light green in a Parametric Diagram.

Figure 2 -  Parametric diagram for ViewDefinitionContext

The following blocks are instantiated by this template and bound to private parts of the template as shown in the Parametric Diagram section:

Private Part Property:viewDefinitionContext [1] (Block: Ap239Ap233Psm:ViewDefinitionContext)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ViewDefinitionContext:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: UR1
Specification: (OCL2.0)
ViewDefinitionContext::allInstances()->isUnique(Sequence{applicationDomain, lifeCycleStage})
Private Reference Property:apDomain [1] (Block: Ap239Ap233Psm:ApplicationDomain)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the ApplicationDomain:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: UR1
Specification: (OCL2.0)
ApplicationDomain::allInstances()->isUnique(definition)
Private Reference Property:lifeCycle [1] (Block: Ap239Ap233Psm:LifeCycleStage)

The following constraint, normally a uniqueness constraint, is applicable when instantiating the LifeCycleStage:

rule.Ap239Ap233Psm.ExternalOwlClass.ur1
Constraint: UR1
Specification: (OCL2.0)
LifeCycleStage::allInstances()->isUnique(definition)

Figure 3 shows the instances that have been instantiated in the template. These are used to set the default value of blocks.

Instance diagram
Figure 3 -  Model instance diagram for ViewDefinitionContext

The following instances have been created:

sameAsProductLifeCycleSupport instance of Block: Ap239Ap233Psm:ExternalOwlObject.

This is the common application domain for PLCS data.

There are no constraint blocks defined in this template.

No example data sets have been provided for this DEX.